共查询到20条相似文献，搜索用时 656 毫秒
1.
基于线弹性断裂力学理论分析了垂直向地震作用对节理岩体地震动力破坏的影响。在仅考虑峰值时,最不利的单向地震动加速度方向是水平倾向坡外,双向则依据破裂机制是拉剪或压剪,加速度分别是水平倾向坡外与向下或向上的组合。地震动的幅值、作用方向及双向地震动的组合都可使岩体的破坏机制发生转化,并且是突变的、不可逆的。较低峰值的双向地震动产生的应力强度因子可能大于较高峰值的单向地震动所产生的应力强度应子。在岩体节理分布特征和静态应力场一定的初始条件下,第一个导致岩体中产生破裂的地震动加速度幅值及其方向的组合唯一地决定了岩体不可逆破坏发展的方向、机制及最终的破坏特征,其复杂性远大于静力作用时的情况。对岩体地震动力破坏问题的认识应充分考虑垂直向地震动的重要影响。 相似文献
2.
M. K. Jafari K. Amini Hosseini F. Pellet M. Boulon O. Buzzi 《Soil Dynamics and Earthquake Engineering》2003,23(7):619
Variation of the shear strength of rock joints due to cyclic loadings is studied in the present paper. Identical joint surfaces were prepared using a developed moulding method with special mortar and shear tests were performed on these samples under both static and cyclic loading conditions. Different levels of shear displacement were applied on the samples to study joint behaviour before and during considerable relative shear displacement. It was found that the shear strength of joints is related to rate of displacement (shearing velocity), number of loading cycles and stress amplitude. Finally, based on the experimental results, mathematical models were developed for evaluation of shear strength in cyclic loading conditions. 相似文献
3.
The influence of thermal and cyclic stressing on the strength of rocks from Mount St. Helens, Washington 总被引：1，自引：0，他引：1
Jackie Evan Kendrick Rosanna Smith Peter Sammonds Philip G. Meredith Matthew Dainty John S. Pallister 《Bulletin of Volcanology》2013,75(7):1-12
Stratovolcanoes and lava domes are particularly susceptible to sector collapse resulting from wholesale rock failure as a consequence of decreasing rock strength. Here, we provide insights into the influence of thermal and cyclic stressing on the strength and mechanical properties of volcanic rocks. Specifically, this laboratory study examines the properties of samples from Mount St. Helens; chosen because its strength and stability have played a key role in its history, influencing the character of the infamous 1980 eruption. We find that thermal stressing exerts different effects on the strengths of different volcanic units; increasing the heterogeneity of rocks in situ. Increasing the uniaxial compressive stress generates cracking, the timing and magnitude of which was monitored via acoustic emission (AE) output during our experiments. AEs accelerated in the approach to failure, sometimes following the pattern predicted by the failure forecast method (Kilburn 2003). Crack damage during the experiments was tracked using the evolving static Young’s modulus and Poisson’s ratio, which represent the quasi-static deformation in volcanic edifices more accurately than dynamic elastic moduli which are usually implemented in volcanic models. Cyclic loading of these rocks resulted in a lower failure strength, confirming that volcanic rocks may be weakened by repeated inflation and deflation of the volcanic edifice. Additionally, volcanic rocks in this study undergo significant elastic hysteresis; in some instances, a material may fail at a stress lower than the peak stress which has previously been endured. Thus, a volcanic dome repeatedly inflated and deflated may progressively weaken, possibly inducing failure without necessarily exceeding earlier conditions. 相似文献
4.
5.
Experimental evidence supporting the fact that results from quasi‐static (QS) test of low‐rise reinforced concrete walls may be safely assumed as a lower limit of strength and displacement, and energy dissipation capacities are still scarce. The aim of this paper is to compare the seismic performance of 12 reinforced concrete walls for low‐rise housing: six prototype walls tested under QS‐cyclic loading and six models tested under shaking table excitations. Variables studied were wall geometry, type of concrete, web steel ratio, type of web reinforcement and testing method. Comparison of results from dynamic and QS‐cyclic tests indicated that stiffness and strength properties were dependent on the loading rate, the strength mechanisms associated with the failure mode, the low‐cycle fatigue, and the cumulative parameters, such as displacement demand and energy dissipated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
6.
Nine large‐scale beam specimens were constructed. Of which, one was used as the control, whereas the other eight ones were divided into four sets. Each set had two specimens and was subjected to accelerated corrosion using an imposed current for the same time interval. Following the corrosion, a specimen in each set was tested using cyclic loading to examine the seismic performance, whereas the other one was demolished to examine the extent of corrosion. Cyclic loading results indicated that with an increasing corrosion level, the ultimate drift, ductility, plastic rotation capacity, and energy dissipation of the beams initially increased and later decreased. The failure mode switched from flexural failure, largely owing to buckling of the longitudinal reinforcement to flexural‐shear failure, which is mainly caused by fracturing of the transverse reinforcement. Corrosion increased shear deformation and the spread of plasticity of the plastic hinge region. The residual flexural strength, as estimated by an empirical equation based on the maximum pit depth in the longitudinal reinforcement, closely corresponds to experimental values. Furthermore, the residual shear strength estimated based on the minimum reduced cross‐sectional area of transverse reinforcement correlates better with the experimental observations than that based on the weight loss. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
7.
8.
M. Ataur Rahman Sri Sritharan 《地震工程与工程振动(英文版)》2006,5(2):285-296
The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability. 相似文献
9.
钢筋混凝土核心筒体抗震性能试验研究 总被引：17，自引：5，他引：17
本文对两组五个钢筋混凝土核心筒试件进行了低周反复荷载试验，研究了不同轴压比和剪跨比的核心筒破坏机理、承载能力、延性和耗能能力等方面的抗震性能。结果表明，轴压比对核心筒的抗震性能有较大影响。 相似文献
10.
H. Nagase K. Shimizu A. Hiro-oka Y. Tanoue Y. Saitoh 《Soil Dynamics and Earthquake Engineering》2006,26(2-4):209-220
It is widely known that the sensitivity ratio of Ariake marine clay increases, if the clay is leached. Therefore, it is assumed that the mechanical properties of such clay considerably change and the shear strength decreases, if it is subjected to a cyclic load as a disturbance force, like earthquakes. In the present study, dynamic deformation and strength tests, as well as consolidation tests were conducted on Ariake clay that had leached. Static shear tests were also carried out on the clay after it had been subjected to a cyclic load. The stability of man-made earth structures on Ariake clay deposits that had leached during earthquakes was investigated. Undisturbed samples of the clay sedimented in the sea area were used in all the tests. Furthermore, an earthquake-induced residual deformation analysis was also conducted on the basis of the test results described above. Consequently, the following behaviors were observed in the study. (1) When Ariake marine clay was leached, the dynamic strength decreased and the shear modulus after subjecting it to a cyclic load remarkably decreased. (2) The effect of the leaching on the behavior of Ariake clay deposits was considerable during earthquakes. 相似文献
11.
Norio Hori Norio Inoue Dangol Purushotam Tetsuya Nishida Jun Kobayashi 《地震工程与结构动力学》2006,35(13):1699-1719
To improve the seismic performance of masonry structures, confined masonry that improves the seismic resistance of masonry structures by the confining effect of surrounding bond beams and tie columns is constructed. This study investigated the earthquake resisting behaviour of confined masonry structures that are being studied and constructed in China. The structural system consists of unreinforced block masonry walls with surrounding reinforced concrete bond beams and tie columns. The characteristics of the structure include: (1) damage to blocks is reduced and brittle failure is avoided by the comparatively lower strength of the joint mortar than that of the blocks, (2) the masonry walls and surrounding reinforced concrete bond beams and tie columns are securely jointed by the shear keys of the tie columns. In this study, wall specimens made of concrete blocks were tested under a cyclic lateral load and simulated by a rigid body spring model that models non‐linear behaviour by rigid bodies and boundary springs. The results of studies outline the resisting mechanism, indicating that a rigid body spring model is considered appropriate for analysing this type of structure. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
12.
Kefayati Sadegh Baghbanan Alireza Torkan Masoud Hashemolhosseini Hamid Dehnavi Roohollah Narimani 《地震工程与工程振动(英文版)》2020,19(4):937-951
Uncertainty in input fracture geometric parameters during analysis of the stability of jointed rock slopes is inevitable and therefore the stochastic discrete fracture network (DFN) — distinct element method (DEM) is an efficient modeling tool. In this research, potentially unstable conditions are detected in the right abutment of the Karun 4 dam and downstream of the dam body as a case study. Two extreme states with small and relatively large block sizes are selected and a series of numerical DEM models are generated using a number of validated DFN models. Stability of the rock slope is assessed in both static and dynamic loading states. Based on the design basis earthquake (DBE) and maximum credible earthquake (MCE) expected in the dam site, histories of seismic waves are applied to analyze the stability of the slope in dynamic earthquake conditions. The results indicate that a MCE is likely to trigger sliding of rock blocks on the rock slope major joint. Furthermore, the dynamic analysis also shows a local block failure by the DBE, which can consequently lead to slope instability over the long term. According to the seismic behavior of the two models, larger blocks are prone to greater instability and are less safe against earthquakes.
相似文献13.
The paper deals with the non-linear dynamic analysis of concentrically braced pinned frames under earthquake conditions. A model is first presented for the behaviour of bars subjected to cyclic axial force, which takes into account the overall and local buckling phenomena, section shape, residual stresses, material behaviour and damage accumulation due to low-cycle fatigue and fracture. Dynamic analyses of bracing systems are then described: these have been performed, on the basis of the axially loaded bar model, within the framework of a simplified procedure for the determination of optimal design factors. The results obtained are first reported for the case of one-storey systems; an example of the behaviour of a four-storey system is given finally. 相似文献
14.
采用分层底部真空预压技术,在模型试验箱内制备强度沿深度增加的模型试验土层;进而利用自行开发的电动伺服加载装置,在荷载控制方式下,针对水平破坏模式,进行两种直径的吸力锚在最佳系泊点受倾斜方向静荷载与循环荷载共同作用下的承载力模型试验。试验结果表明,循环荷载作用过程中锚的循环变形没有明显增加,导致锚破坏的是循环累积变形。强度沿深度增加软土和均一强度软土中吸力锚循环承载力的相对变化规律一致,当循环破坏次数为100时,循环承载力是静承载力的90%左右;当循环破坏次数增加至2 000时,循环承载力减小至静承载力的70%左右。锚径的变化只影响循环承载力的大小,不影响其相对变化。强度沿深度增加土层中的吸力锚,其循环荷载下竖向阻力弱化程度大于水平阻力弱化程度,这与均一强度土层中吸力锚受循环荷载作用时的性态一致。 相似文献
15.
Ｉｎｆｌｕｅｎｃｅｏｆｇｅｏｓｔａｔｉｃｓｔｒｅｓｅｓｏｎｐｅｒｍｅａｂｉｌｉ┐ｔｙｏｆｊｏｉｎｔｅｄｒｏｃｋｍａｓｅｓＣＵＡＮＧ－ＢＢＩＮＧＺＨＯＵ（周创兵）ａｎｄＷＥＮ－ＬＩＮＸＩＯＮＧ（熊文林）ＷｕｈａｎＵｎｉｕｅｒｓｉｔｙｏｆＨｙｄｒａｕｌ... 相似文献
16.
A two-stage model of fracture of rocks 总被引：7，自引：0，他引：7
In this paper we propose a two-stage model of rock fracture. In the first stage, cracks or local regions of failure are uncorrelated and occur randomly throughout the rock in response to loading of pre-existing flaws. As damage accumulates in the rock, there is a gradual increase in the probability that large clusters of closely spaced cracks or local failure sites will develop. Based on statistical arguments, a critical density of damage will occur where clusters of flaws become large enough to lead to larger-scale failure of the rock (stage two). While crack interaction and cooperative failure is expected to occur within clusters of closely spaced cracks, the initial development of clusters is predicted based on the random variation in pre-existing flaw populations. Thus the onset of the unstable second stage in the model can be computed from the generation of random, uncorrelated damage. The proposed model incorporates notions of the kinetic (and therefore time-dependent) nature of the strength of solids as well as the discrete hierarchic structure of rocks and the flaw populations that lead to damage accumulation. The advantage offered by this model is that its salient features are valid for fracture processes occurring over a wide range of scales including earthquake processes. A notion of the rank of fracture (fracture size) is introduced, and criteria are presented for both fracture nucleation and the transition of the failure process from one scale to another. 相似文献
17.
Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves. However, for rock slopes, the earthquake waves might approach the outcrop still with a evidently oblique direction. To investigate the impact of obliquely incident earthquake excitations, the input method for SV and P waves with arbitrary incident angles is conducted, respectively, by adopting the equivalent nodal force method together with a viscous-spring boundary. Then, the input method is introduced within the framework of ABAQUS software and verified by a numerical example. Both SV and P waves input are considered herein for a 2D jointed rock slope. For the jointed rock mass, the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum. Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes. The larger the incident angle, the greater the risk of slope instability. Furthermore, the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily. P waves induce weaker responses and SV waves are shown to be more critical. 相似文献
18.
复杂应力条件下松砂振动孔隙水压力与体变特性的试验研究 总被引：5，自引：2，他引：3
利用新研制的土工静力-动力液压三轴-扭转多功能剪切仪,在5种初始主应力方向角与5种中主应力系数相组合的初始固结条件下,对饱和松砂进行了不排水循环扭剪试验。讨论了初始固结条件对不排水条件下饱和松砂孔隙水压力变化规律及对剪胀、剪缩、卸荷体缩等体积变化过程的影响。试验研究表明：（1）分别以稳定残余孔隙水压力和破坏时循环次数归一化后的残余孔隙水压力比和循环次数比之间的关系可以用双曲线模式表达。其参数主要依赖于初始主应力方向,中主应力系数对参数的影响并不显著。归一化后的孔隙水压力比与广义剪应变之间的关系也可以用双曲线模式表达,其中的2个待定参数依赖于初始主应力方向,与中主应力系数无关;（2）在三向非均等固结条件下的不排水循环扭剪试验中,饱和松砂表现出卸荷体缩特性,不同初始主应力方向时,饱和松砂剪缩、剪胀、卸荷体缩呈现出不同的交替变化模式。 相似文献
19.
20.
Systematic development of a new hysteretic damper based on torsional yielding: part II—experimental phase 
下载免费PDF全文
下载免费PDF全文 This paper reports on experimental studies carried out on a 200 kN, 120 mm‐capacity prototype of the newly developed multidirectional torsional hysteretic damper for seismic protection of structures. The main goal of the experiments is to test the validity of the theory developed in a companion paper and to evaluate the low‐cycle fatigue performance of the energy dissipaters of the damper. Because the design and configuration of the damper allow easy replacement of the energy dissipaters, four sets of energy dissipaters were produced out of S355J2 + N, C45 (two sets), and 42CrMo4 + QT steel grades. Force–displacement response of the multidirectional torsional hysteretic damper is studied through fully reversed cyclic quasi‐static displacement‐controlled tests that were carried out in compliance with EN 15129. Following the verification tests, with the aim of studying fatigue and fracture behavior of the cylindrical energy dissipaters of the device, certain numbers of them were subjected to further cyclic tests up to failure, and observations on their fatigue/fracture behavior are reported. The experimental verification test results proved the validity of the developed theory and component design assumptions presented in a companion paper. Furthermore, the energy dissipaters exhibited excellent torsional low‐cycle fatigue performance with number of cycles to failure reaching 118 at a maximum shear strain of 8% for S355J2 + N steel grade. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献