首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
 Synthetic aegirine LiFeSi2O6 and NaFeSi2O6 were characterized using infrared spectroscopy in the frequency range 50–2000 cm−1, and at temperatures between 20 and 300 K. For the C2/c phase of LiFeSi2O6, 25 of the 27 predicted infrared bands and 26 of 30 predicted Raman bands are recorded at room temperature. NaFeSi2O6 (with symmetry C2/c) shows 25 infrared and 26 Raman bands. On cooling, the C2/c–P21/c structural phase transition of LiFeSi2O6 is characterized by the appearance of 13 additional recorded peaks. This observation indicates the enlargement of the unit cell at the transition point. The appearance of an extra band near 688 cm−1 in the monoclinic P21/c phase, which is due to the Si–O–Si vibration in the Si2O6 chains, indicates that there are two non-equivalent Si sites with different Si–O bond lengths. Most significant spectral changes appear in the far-infrared region, where Li–O and Fe–O vibrations are mainly located. Infrared bands between 300 and 330 cm−1 show unusually dramatic changes at temperatures far below the transition. Compared with the infrared data of NaFeSi2O6 measured at low temperatures, the change in LiFeSi2O6 is interpreted as the consequence of mode crossing in the frequency region. A generalized Landau theory was used to analyze the order parameter of the C2/c–P21/c phase transition, and the results suggest that the transition is close to tricritical. Received: 21 January 2002 / Accepted: 22 July 2002  相似文献   

2.
Mn2+Sb2S4, a monoclinic dimorph of clerite, and benavidesite (Mn2+Pb4Sb6S14) show well-individualized single chains of manganese atoms in octahedral coordination. Their magnetic structures are presented and compared with those of iron derivatives, berthierite (Fe2+Sb2S4) and jamesonite (Fe2+Pb4Sb6S14). Within chains, interactions are antiferromagnetic. Like berthierite, MnSb2S4 shows a spiral magnetic structure with an incommensurate 1D propagation vector [0, 0.369, 0], unchanged with temperature. In berthierite, the interactions between identical chains are antiferromagnetic, whereas in MnSb2S4 interactions between chains are ferromagnetic along c-axis. Below 6 K, jamesonite and benavidesite have commensurate magnetic structures with the same propagation vector [0.5, 0, 0]: jamesonite is a canted ferromagnet and iron magnetic moments are mainly oriented along the a-axis, whereas for benavidesite, no angle of canting is detected, and manganese magnetic moments are oriented along b-axis. Below 30 K, for both compounds, one-dimensional magnetic ordering or correlations are visible in the neutron diagrams and persist down to 1.4 K.  相似文献   

3.
Room-temperature-polarized single-crystal Raman spectra have been measured for both GdAlO3 and YAlO3. Both aluminates crystallize in the orthorhombic (Pbnm) perovskite structure. Of the 24 possible Raman modes in 4 symmetries, 20 and 17 modes were observed for gadolinium and yttrium aluminates, respectively. Comparisons of the Raman spectra of these two aluminates to those of 28 other orthorhombic ABO3 perovskites revealed remarkably similar spectral patterns, regardless of chemistry or valency of the cations. Closer examination of the effect of mass, valencies, and size of the cations on the Raman spectra versus composition revealed that for the observed modes, the A cation plays the dominant role in determining the Raman shift. In particular, the one to two lowest energy modes in each symmetry are determined by cation mass and valency no matter what the chemistry. For some perovskites with common A cations, higher energy modes were also strikingly similar. In particular, the calcium perovskites had almost all Ag modes at the same energies despite the greatly varying B cations. The second to the lowest mode in Ag and B1g depended only on A cation mass for all perovskites. The volume plays a minor role throughout but is hard to separate from mass effects because the most massive cations are also the largest. However, if the B-cation is common, for example, aluminates or ferrites, the volume has a minor effect on the higher energy modes. These trends were not observed for all perovskites. Notable exceptions were found if a perovskite is near a phase transition or metastable, as found for three manganites. The effect of increased valency of the A cation from 2–4 to 3–3 perovskites expresses itself as relatively larger Raman shifts for the lowest energy modes. Analog studies of MgSiO3 perovskites should be undertaken with only 2–4 perovskites. The increased understanding for the mode distributions of perovskites allows for better estimates of their thermodynamic properties through vibrational modeling.  相似文献   

4.
The phase relations and compression behavior of MnTiO3 perovskite were examined using a laser-heated diamond-anvil cell, X-ray diffraction, and analytical transmission electron microscopy. The results show that MnTiO3 perovskite becomes unstable and decomposes into MnO and orthorhombic MnTi2O5 phases at above 38 GPa and high temperature. This is the first example of ABO3 perovskite decomposing into AO + AB2O5 phases at high pressure. The compression behavior of volume, axes, and the tilting angle of TiO6 octahedron of MnTiO3 perovskite are consistent with those of other A2+B4+O3 perovskites, although no such decomposition was observed in other perovskites. FeTiO3 is also known to decompose into two phases, instead of transforming into the CaIrO3-type post-perovskite phase and we argue that one of the reasons for the peculiar behavior of titanate is the weak covalency of the Ti–O chemical bonds.  相似文献   

5.
During the production of hydrocarbons from subterranean reservoirs, scaling with calcium carbonate and barium sulfate causes flux decline and dangerous problems in production facilities. This work is intended to study the effect of calcium ions on the precipitation of barium sulfate (barite); then, the effect of the formed barite on calcium carbonate crystallization. The conductometric and pH methods were used to follow the progress of the precipitation reaction in aqueous medium. The obtained precipitates were characterized by FTIR, RAMAN, SEM, and XRD. It was shown that Ca2+ in the reaction media does not affect the microstructure of barite even for higher calcium–barium molar ratio. It influences the precipitation kinetics and the solubility of barite by the formation of CaSO4° ion pairing as a predominant role of complex formation (CaSO4) and the increase of the ionic strength. In Ca(HCO3)2-BaSO4-NaCl aqueous system, experiments have showed that added or formed barite in the reaction media accelerates calcite precipitation. No effect on the microstructure of heterogeneous formed calcite which remain calcite shape. However the presence of carbonate ions affects slightly the microstructure of barite.  相似文献   

6.
The crystal structure of the unstable mineral alumoklyuchevskite K3Cu3AlO2(SO4)4 [monoclinic, I2, a = 18.772(7), b = 4.967(2), c = 18.468(7) Å, β = 101.66(1)°, V = 1686(1) Å] was refined to R 1 = 0.131 for 2450 unique reflections with F ≥ 4σF hkl. The structure is based on oxocentered tetrahedrons (OAlCu 3 7+ ) linked into chains via edges. Each chain is surrounded by SO4 tetrahedrons forming a structural complex. Each complex is elongated along the b axis. This type of crystal structure was also found in other fumarole minerals of the Great Tolbachik Fissure Eruption (GTFE, Kamchatka Peninsula, Russia, 1975–1976), klyuchevskite, K3Cu3Fe3+O2(SO4)4; and piypite, K2Cu2O(SO4)2.  相似文献   

7.
We present results from low-temperature heat capacity measurements of spinels along the solid solution between MgAl2O4 and MgCr2O4. The data also include new low-temperature heat capacity measurements for MgAl2O4 spinel. Heat capacities were measured between 1.5 and 300 K, and thermochemical functions were derived from the results. No heat capacity anomaly was observed for MgAl2O4 spinel; however, we observe a low-temperature heat capacity anomaly for Cr-bearing spinels at temperatures below 15 K. From our data we calculate standard entropies (298.15 K) for Mg(Cr,Al)2O4 spinels. We suggest a standard entropy for MgAl2O4 of 80.9 ± 0.6 J mol−1 K−1. For the solid solution between MgAl2O4 and MgCr2O4, we observe a linear increase of the standard entropies from 80.9 J mol−1 K−1 for MgAl2O4 to 118.3 J mol−1 K−1 for MgCr2O4.  相似文献   

8.
In the olivine crystal structure, cations are distributed over two inequivalent octahedral sites, M1 and M2. Kinetics of cation exchange between the two octahedral sites in (Co0.1Mg0.9)2SiO4 single crystal have been studied in the temperature range from 600 to 800°C by monitoring the time evolution of the absorbance of Co2+ ions in M1 or M2 sites using optical spectroscopy after rapid temperature jumps. It was found from such temperature-jump induced relaxation experiments that with increasing temperature the absorbance of Co2+ ions in the M1 site decreases while that in the M2 site increases. This indicates a tendency of Co2+ cations to populate the M2 site with increasing temperatures and vice versa. The experimental relaxation data can be modeled using a triple exponential equation based on theoretical analysis. Activation energies of 221 ± 4 and 213 ± 10 kJ/mol were derived from relaxation experiments on the M2 site and M1 site, respectively, for the cation exchange processes in (Co0.1Mg0.9)2SiO4 olivine. Implications for cation diffusion at low temperatures are discussed.  相似文献   

9.
Density functional theory (DFT) calculations were employed to investigate the effects of adsorption of toxic carbon monoxide (CO) and nitrogen monoxide (NO) molecules on heterogeneous C16Zn8O8 nanocage. A detailed analysis of the energetic, geometry, and electronic structure of various CO and NO adsorptions on the cluster surface was performed. It has been shown that CO molecule was adsorbed on the surface of the cluster resulting in more stable complex system, while NO molecule adsorption led to less stable system. These processes also changed the electronic properties of the cluster by reducing the HOMO/LUMO energy gap after adsorption process. Since this phenomenon led to an increment in the electrical conductivity of the cluster at a definite temperature, the C16Zn8O8 was transformed to a stronger semiconductor substance upon the CO and NO adsorption. We believe that this research may be helpful in the several fields study such as sensor and catalyst investigation.  相似文献   

10.
The crystal structure of Pb6Bi2S9 is investigated at pressures between 0 and 5.6 GPa with X-ray diffraction on single-crystals. The pressure is applied using diamond anvil cells. Heyrovskyite (Bbmm, a = 13.719(4) Å, b = 31.393(9) Å, c = 4.1319(10) Å, Z = 4) is the stable phase of Pb6Bi2S9 at ambient conditions and is built from distorted moduli of PbS-archetype structure with a low stereochemical activity of the Pb2+ and Bi3+ lone electron pairs. Heyrovskyite is stable until at least 3.9 GPa and a first-order phase transition occurs between 3.9 and 4.8 GPa. A single-crystal is retained after the reversible phase transition despite an anisotropic contraction of the unit cell and a volume decrease of 4.2%. The crystal structure of the high pressure phase, β-Pb6Bi2S9, is solved in Pna2 1 (a = 25.302(7) Å, b = 30.819(9) Å, c = 4.0640(13) Å, Z = 8) from synchrotron data at 5.06 GPa. This structure consists of two types of moduli with SnS/TlI-archetype structure in which the Pb and Bi lone pairs are strongly expressed. The mechanism of the phase transition is described in detail and the results are compared to the closely related phase transition in Pb3Bi2S6 (lillianite).  相似文献   

11.
Atomistic model was proposed to describe the thermodynamics of mixing in the diopside-K-jadeite solid solution (CaMgSi2O6-KAlSi2O6). The simulations were based on minimization of the lattice energies of 800 structures within a 2 × 2 × 4 supercell of C2/c diopside with the compositions between CaMgSi2O6 and KAlSi2O6 and with variable degrees of order/disorder in the arrangement of Ca/K cations in M2 site and Mg/Al in Ml site. The energy minimization was performed with the help of a force-field model. The results of the calculations were used to define a generalized Ising model, which included 37 pair interaction parameters. Isotherms of the enthalpy of mixing within the range of 273–2023 K were calculated with a Monte Carlo algorithm, while the Gibbs free energies of mixing were obtained by thermodynamic integration of the enthalpies of mixing. The calculated T-X diagram for the system CaMgSi2O6-KAlSi2O6 at temperatures below 1000 K shows several miscibility gaps, which are separated by intervals of stability of intermediate ordered compounds. At temperatures above 1000 K a homogeneous solid solution is formed. The standard thermodynamic properties of K-jadeite (KAlSi2O6) evaluated from quantum mechanical calculations were used to determine location of several mineral reactions with the participation of the diopside-K-jadeite solid solution. The results of the simulations suggest that the low content of KalSi2O6 in natural clinopyroxenes is not related to crystal chemical factors preventing isomorphism, but is determined by relatively high standard enthalpy of this end member.  相似文献   

12.
Raman spectroscopy and heat capacity measurements have been used to study the post-perovskite phase of CaIr0.5Pt0.5O3, recovered from synthesis at a pressure of 15 GPa. Laser heating CaIr0.5Pt0.5O3 to 1,900 K at 60 GPa produces a new perovskite phase which is not recoverable and reverts to the post-perovskite polymorph between 20 and 9 GPa on decompression. This implies that Pt-rich CaIr1−xPtxO3 perovskites including the end member CaPtO3 cannot easily be recovered to ambient pressure from high P–T synthesis. We estimate an increase in the thermodynamic Grüneisen parameter across the post-perovskite to perovskite transition of 34%, of similar magnitude to those for (Mg,Fe)SiO3 and MgGeO3, suggesting that CaIr0.5Pt0.5O3 is a promising analogue for experimental studies of the competition in energetics between perovskite and post-perovskite phases of magnesium silicates in Earth’s lowermost mantle. Low-temperature heat capacity measurements show that CaIrO3 has a significant Sommerfeld coefficient of 11.7 mJ/mol K2 and an entropy change of only 1.1% of Rln2 at the 108 K Curie transition, consistent with the near-itinerant electron magnetism. Heat capacity results for post-perovskite CaIr0.5Rh0.5O3 are also reported.  相似文献   

13.
The successful synthesis of nanoparticles of Fe-bearing kuramite, (Cu,Fe)3SnS4, is reported in this study. Nanocrystalline powders were obtained through a mild, environmentally friendly and scalable solvothermal approach, in a single run. The sample was the object of a multidisciplinary investigation, including X-ray diffraction and absorption, scanning electron microscopy and microanalysis, electron paramagnetic resonance, diffuse reflectance and Mössbauer spectroscopy as well as SQUID magnetometry. The nanoparticles consist of pure Fe-bearing kuramite, exhibiting tetragonal structure. The valence state of the metal cations was assessed to be Cu+, Sn4+ and Fe3+. The material presents a band gap value of 1.6 eV, which is fully compatible with solar cell applications. The uptake of Fe by nanokuramite opens a compositional field where the physical properties can be tuned. We thus foster the application of Fe-bearing nanokuramite for photovoltaics and energy storage purposes.  相似文献   

14.
The stability and the thermo-elastic behaviour of a natural londonite
[1a ( Cs0.36 K0.34 Rb0.15 Ca0.04 Na0.02 )S0.914e ( Al3.82 Li0.05 Fe0.02 )S3.894e ( Be3.82 B0.18 )S412h ( B10.97 Be1 Si0.01 )S11.98 O28] [^{{1a}} \left( {Cs_{{0.36}} K_{{0.34}} Rb_{{0.15}} Ca_{{0.04}} Na_{{0.02}} } \right)_{\Sigma 0.91}{}^{{4e}} \left( {Al_{{3.82}} Li_{{0.05}} Fe_{{0.02}} } \right)_{{\Sigma 3.89}}{}^{{4e}} \left( {Be_{{3.82}} B_{{0.18}} } \right)_{{\Sigma 4}}{}^{{12h}} \left( {B_{{10.97}} Be_{1} Si_{{0.01}} } \right)_{{\Sigma 11.98}} O_{{28}}]  相似文献   

15.
A single crystal X-ray diffraction study on lithium tetraborate Li2B4O7 (diomignite, space group I41 cd) has been performed under pressure up to 8.3 GPa. No phase transitions were found in the pressure range investigated, and hence the pressure evolution of the unit-cell volume of the I41 cd structure has been described using a third-order Birch–Murnaghan equation of state (BM-EoS) with the following parameters: V 0  = 923.21(6) Å3, K 0  = 45.6(6) GPa, and K′ = 7.3(3). A linearized BM-EoS was fitted to the axial compressibilities resulting in the following parameters a 0  = 9.4747(3) Å, K 0a  = 73.3(9) GPa, K′ a  = 5.1(3) and c 0  = 10.2838(4) Å, K 0c  = 24.6(3) GPa, K′ c  = 7.5(2) for the a and c axes, respectively. The elastic anisotropy of Li2B4O7 is very large with the zero-pressure compressibility ratio β 0c /β 0a  = 3.0(1). The large elastic anisotropy is consistent with the crystal structure: A three-dimensional arrangement of relatively rigid tetraborate groups [B4O7]2− forms channels occupied by lithium along the polar c–axis, and hence compression along the c axis requires the shrinkage of the lithium channels, whereas compression in the a direction depends mainly on the contraction of the most rigid [B4O7]2− units. Finally, the isothermal bulk modulus obtained in this work is in general agreement with that derived from ultrasonic (Adachi et al. in Proceedings-IEEE Ultrasonic Symposium, 228–232, 1985; Shorrocks et al. in Proceedings-IEEE Ultrasonic Symposium, 337–340, 1981) and Brillouin scattering measurements (Takagi et al. in Ferroelectrics, 137:337–342, 1992).  相似文献   

16.
 Planewave pseudopotential calculations of supercell total energies were used as bases for first-principles calculations of the CaCO3–MgCO3 and CdCO3–MgCO3 phase diagrams. Calculated phase diagrams are in qualitative to semiquantitative agreement with experiment. Two unobserved phases, Cd3Mg (CO3)4 and CdMg3(CO3)4, are predicted. No new phases are predicted in the CaCO3–MgCO3 system, but a low-lying metastable Ca3Mg(CO3)4 state, analogous to the Cd3Mg(CO3)4 phase is predicted. All of the predicted lowest-lying metastable states, except for huntite CaMg3(CO3)4, have dolomite-related structures, i.e. they are layer structures in which A m B n cation layers lie perpendicular to the rhombohedral [111] vector. Received: 6 May 2002 / Accepted: 23 October 2002 Acknowledgements This work was partially supported by NSF contract DMR-0080766 and NIST.  相似文献   

17.
  相似文献   

18.
We present here a numerical modelling study of dislocations in perovskite CaTiO3. The dislocation core structures and properties are calculated through the Peierls–Nabarro model using the generalized stacking fault (GSF) results as a starting model. The GSF are determined from first-principles calculations using the VASP code. The dislocation properties such as collinear, planar core spreading and Peierls stresses are determined for the following slip systems: [100](010), [100](001), [010](100), [010](001), [001](100), [001](010), and All dislocations exhibit lattice friction, but glide appears to be easier for [100](010) and [010](100). [001](010) and [001](100) exhibit collinear dissociation. Comparing Peierls stresses among tausonite (SrTiO3), perovskite (CaTiO3) and MgSiO3 perovskite demonstrates the strong influence of orthorhombic distortions on lattice friction. However, and despite some quantitative differences, CaTiO3 appears to be a satisfactory analogue material for MgSiO3 perovskite as far as dislocation glide is concerned.  相似文献   

19.
The Bader topological analysis has been applied to ab initio computed electron densities of beryl, in order to clarify its mechanism of compression. Full structural optimization and total energy (E) calculations were performed at different cell volumes (V c). The pressure at each volume and the equation of state were estimated from the first and second derivatives of the resultant E(V c) curve. The total (negative) potential energy of the crystal, sum of both attractive and repulsive electrostatic terms, was found to systematically decrease (i.e., it moved to more negative values) up to the highest pressure considered (28.4 GPa), indicating that interelectronic and internuclear repulsions are not the only terms controlling the compressibility, at least in the pressure range investigated. Electronic kinetic energy increases as the cell volume is reduced, leading to a parallel increase of the total energy. Both structure at equilibrium and compressibility are therefore due to the balance between the opposing kinetic and potential energy terms. The Bader theory has been used to identify the topological atoms within the structure and to calculate their properties, with particular attention to the forces driving the structural relaxation at high pressure. On a qualitative basis, the obtained results are expected to be transferable to the discussion of compressibility of other mineral phases.  相似文献   

20.
The high-pressure behavior of a vanadinite (Pb10(VO4)6Cl2, a = b = 10.3254(5), c = 7.3450(4) Å, space group P63/m), a natural microporous mineral, has been investigated using in-situ HP-synchrotron X-ray powder diffraction up to 7.67 GPa with a diamond anvil cell under hydrostatic conditions. No phase transition has been observed within the pressure range investigated. Axial and volume isothermal Equations of State (EoS) of vanadinite were determined. Fitting the P–V data with a third-order Birch-Murnaghan (BM) EoS, using the data weighted by the uncertainties in P and V, we obtained: V 0 = 681(1) Å3, K 0 = 41(5) GPa, and K′ = 12.5(2.5). The evolution of the lattice constants with P shows a strong anisotropic compression pattern. The axial bulk moduli were calculated with a third-order “linearized” BM-EoS. The EoS parameters are: a 0 = 10.3302(2) Å, K 0(a) = 35(2) GPa and K′(a) = 10(1) for the a-axis; c 0 = 7.3520(3) Å, K 0(c) = 98(4) GPa, and K′(c) = 9(2) for the c-axis (K 0(a):K 0(c) = 1:2.80). Axial and volume Eulerian-finite strain (fe) at different normalized stress (Fe) were calculated. The weighted linear regression through the data points yields the following intercept values: Fe a (0) = 35(2) GPa for the a-axis, Fe c (0) = 98(4) GPa for the c-axis and Fe V (0) = 45(2) GPa for the unit-cell volume. The slope of the regression lines gives rise to K′ values of 10(1) for the a-axis, 9(2) for the c-axis and 11(1) for the unit cell-volume. A comparison between the HP-elastic response of vanadinite and the iso-structural apatite is carried out. The possible reasons of the elastic anisotropy are discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号