共查询到20条相似文献，搜索用时 31 毫秒
1.
Two distinct types of alluvial fans occur in the Bow River Valley, Alberta, Canada: fluvially dominated and debris flow dominated. Large, gently sloping fans dominated by fluvial processes are associated with large and less rugged drainage basins, and small rugged basins have produced small, steep fans dominated by debris flow processes. Quantitative analysis demonstrates that strong fan-basin morphometric relationships occur despite a short fan history. Statistical analysis of fan area-basin area relationships indicate that debris flow fan areas do not increase in size as quickly as contributing basins. The relationship of fluvial fan area to basin area is not statistically significant. However, this relationship is probably affected by fan erosion. Examination of fan slope to basin ruggedness relationships indicates that fan slope increases more rapidly than basin ruggedness for both fan types. This is likely related to non-linear discharge and sediment size effects on fluvial fans, and reworking of larger fan surfaces by fluvial processes on debris flow fans. 相似文献
2.
Sedimentologically significant tributaries: catchment‐scale controls on sediment (dis)connectivity in the Lockyer Valley,SEQ, Australia 
下载免费PDF全文
下载免费PDF全文 The nature of catchment‐scale sediment (dis)connectivity is the primary influence on sediment delivery to trunk streams and controls the particle size distribution of channel bed sediments. Here, we examine the distribution of major sediment buffers (floodplains, terraces, alluvial fans, trapped tributary fills), barriers (weirs), and effective catchment area (i.e. sediment contributing area) to characterize the potential for coarse sediment (dis)connectivity in 20 tributaries of Lockyer Creek, in the Lockyer Valley, SEQ. We then analyse the distribution of trunk stream sedimentary links to determine how certain tributaries or disconnecting features (buffers and barriers) influence downstream patterns of bed sediment fining along Lockyer Creek. We find that buffering increases downstream in the Lockyer Valley, and that tributary position and shape influence the space available for sediment buffering. Correspondingly, the spatial extent of sediment buffers impacts the distribution of effective catchment area, which influences the sedimentological significance of individual tributaries. Tributary sediment connectivity, the extent of overbank flows (floodwater zones), and weir locations all exert an additional influence on the distribution of sediment links along the trunk stream. These controls are related to the physiographic and climatic setting of the Lockyer Valley, and anthropogenic influences in this system. We conclude that controls on sediment connectivity and bed load sediment characteristics are highly variable between catchments, and that sediment (dis)connectivity merits equal consideration with tributary basin/channel size when determining controls on tributary–trunk stream relationships and channel sediment regime. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
3.
An extensive survey and topographic analysis of five watersheds draining the Luquillo Mountains in north‐eastern Puerto Rico was conducted to decouple the relative influences of lithologic and hydraulic forces in shaping the morphology of tropical montane stream channels. The Luquillo Mountains are a steep landscape composed of volcaniclastic and igneous rocks that exert a localized lithologic influence on the stream channels. However, the stream channels also experience strong hydraulic forcing due to high unit discharge in the humid rainforest environment. GIS‐based topographic analysis was used to examine channel profiles, and survey data were used to analyze downstream changes in channel geometry, grain sizes, stream power, and shear stresses. Results indicate that the longitudinal profiles are generally well graded but have concavities that reflect the influence of multiple rock types and colluvial‐alluvial transitions. Non‐fluvial processes, such as landslides, deliver coarse boulder‐sized sediment to the channels and may locally determine channel gradient and geometry. Median grain size is strongly related to drainage area and slope, and coarsens in the headwaters before fining in the downstream reaches; a pattern associated with a mid‐basin transition between colluvial and fluvial processes. Downstream hydraulic geometry relationships between discharge, width and velocity (although not depth) are well developed for all watersheds. Stream power displays a mid‐basin maximum in all basins, although the ratio of stream power to coarse grain size (indicative of hydraulic forcing) increases downstream. Excess dimensionless shear stress at bankfull flow wavers around the threshold for sediment mobility of the median grain size, and does not vary systematically with bankfull discharge; a common characteristic in self‐forming ‘threshold’ alluvial channels. The results suggest that although there is apparent bedrock and lithologic control on local reach‐scale channel morphology, strong fluvial forces acting over time have been sufficient to override boundary resistance and give rise to systematic basin‐scale patterns. Copyright © 2010 John Wiley and Sons, Ltd. 相似文献
4.
Adrian M. Harvey 《地球表面变化过程与地形》2012,37(1):64-76
Alluvial fans and debris cones link two zones of the fluvial system (e.g. hillslope gully systems to stream channels; mountain catchment sediment source areas to main river systems or to sedimentary basins) and therefore have important coupling or buffering roles. These roles may be both functional and preservational. The functional role includes debris‐cone coupling, which controls sediment supply from hillslope gully systems to stream channels, influencing channel morphology. Coupling through larger alluvial fans, expressed by fanhead trenching, causes a distal shift in sedimentation zones, or when expressed by through‐fan trenching, causes complete sediment by‐pass. The preservational role stems from the fact that fans and cones are temporary sediment storage zones, and may preserve a record of source–area environmental change more sensitively than would sediments preserved further downsystem. Fan coupling mechanisms include distally‐induced coupling (basal scour, ‘toe cutting’, marginal incision) and proximally‐induced coupling (fanhead and midfan trenching). These mechanisms lead initially to partial coupling, either extending the immediate sediment source area to the stream system or shifting the focus of sedimentation distally. Complete coupling involves transmission of sediment from the feeder catchment through the fan environment into the downstream drainage or a sedimentary basin. The implications of coupling relate to downstream channel response, fan morphology, sedimentation patterns and vertical sedimentary sequences. Temporal and spatial scales of coupling are related, and with increasing scales the dominant controls shift from storm events to land cover to climatic and base‐level change and ultimately to the relationships between tectonics and accommodation space. Finally, future research challenges are identified. Modern dating techniques and sophisticated analysis of remotely sensed data can greatly improve our understanding of fan dynamics, and should lead to better cross‐scale integration between short‐term process‐based approaches and long‐term sedimentological applications, while maintaining high quality field‐based observations. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
5.
During the last 160 years, land-use changes in the Ozarks have had the potential to cause widespread, low-intensity delivery of excess amounts of gravel-sized sediment to stream channels. Previous studies have indicated that this excess gravel bedload is moving in wave-like forms through Ozarks drainage basins. The longitudinal, areal distribution of gravel bars along 160 km of the Current River, Missouri, was evaluated to determine the relative effects of valley-scale controls, tributary basin characteristics, and lagged sediment transport in creating areas of gravel accumulations. The longitudinal distribution of gravel-bar area shows a broad scale wave-like form with increases in gravel-bar area weakly associated with tributary junctions. Secondary peaks of gravel area with 1·8–4·1 km spacing (disturbance reaches) are superimposed on the broad form. Variations in valley width explain some, but not all, of the short-spacing variation in gravel-bar area. Among variables describing tributary drainage basin morphometry, present-day land use and geologic characteristics, only drainage area and road density relate even weakly to gravel-bar areal inventories. A simple, channel network-based sediment routing model shows that many of the features of the observed longitudinal gravel distribution can be replicated by uniform transport of sediment from widespread disturbances through a channel network. These results indicate that lagged sediment transport may have a dominant effect on the synoptic spatial distribution of gravel in Ozarks streams; present-day land uses are only weakly associated with present-day gravel inventories; and valley-scale characteristics have secondary controls on gravel accumulations in disturbance reaches. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
6.
Discharge characteristics in six adjacent mountainous watersheds in northern New Mexico, U.S.A., vary substantially between basins underlain by different lithologies. Relatively resistant gneisses and granites underlie two basins (drainage areas: 43 and 94 km2) that have high unit discharge (0·010 to 0·14 m3s?1 km?2), high bankfull discharge, and sustained high discharge. Less resistant sandstones and shales underlie four basins (drainage areas: 96 to 215 km2) that have relatively low unit discharge (0·001 to 0·005 m3s?1 km?2), relatively low bankfull discharge, and peak discharges that are not sustained as long as those in the crystalline terrane. Analysis of snowmelt-runoff water budgets suggests that three factors control hydrologic conditions in the basins. First, area-elevation distributions appear to control the timing and amounts of water input. These distributions probably reflect the erosional resistance of the different lithologies. Second, lithology appears to control runoff production in areas having minor amounts of storage. Third, glacial deposits in headwater regions control discharge duration and timing via storage and return flow releases. The amount of return flow released by glacial deposits, however, is probably controlled by the permeability of underlying bedrock. Therefore it appears that the duration, timing, and magnitude of discharge events in the study area are controlled both directly and indirectly by lithology. Stream power and shear stress estimates derived from bankfull discharge and bed-material size data suggest that higher bedload transport rates and larger bedload particle sizes exist in streams draining crystalline rocks than in streams draining sedimentary terrane. It appears that source-area lithology, by controlling discharge production, also influences stream power, bedload transport capabilities, and therefore total amounts of bedload transport. 相似文献
7.
Alluvial fans at tributary junctions modulate sediment flux through river networks, by buffering the mainstem channel from disturbance in the tributaries. Buffering occurs through the storage (and release) of sediment in fans. Here, we use an extensive historic dataset to characterise the ways in which fan buffering can change as sediment supply varies. In New Zealand's East Coast region, sediment supply and fluvial transport are prolific by global standards. We reconstruct how tributary-junction fans in this region have responded to sediment generated by deforestation and extreme storms. The dynamics of five fans along the Tapuaeroa River are examined for the period 1939–2015. In response to major sediment loading, fans aggraded by up to 12 m and prograded by up to 170 m. Net sediment accumulation ranged from near zero to 1.5×106 m3. Fan size, gradient, sediment storage and buffering were influenced by both upstream and downstream controls. Key upstream (tributary) influences were sediment supply and stream power; downstream (mainstem) influences included distal confinement and, importantly, the nature of fan interaction with the mainstem, which aggraded by up to 6 m. The fans' ability to buffer the Tapuaeroa River from change in the tributaries was largely governed by this downstream interaction: as the mainstem aggraded, it increasingly curtailed fan progradation, thus limiting buffering. Previous studies of tributary-junction fans have related fan morphometry to basin characteristics. However, we find that fan slope and area can vary considerably at decadal, annual or even monthly timescales. Consequently, we suggest that such studies could benefit by examining regional histories of disturbance. © 2019 John Wiley & Sons, Ltd. 相似文献
8.
Morphometric variables associated with 41 debris‐?ow and 18 ?uvial fans and their basins in the Southern Alps of New Zealand are examined. The results show statistically signi?cant differences in the area, maximum elevation, relief and ruggedness (Melton's R) of the basin and the area, gradient, and apex and toe elevations of the fan between debris‐?ow and ?uvial sites. Concavity of the fan longitudinal pro?le also differs between the two fan types, although this could not be tested statistically. Most of these morphometric differences re?ect differences in processes and environmental controls on them. Discriminant analysis indicates that basin area and fan gradient best differentiate the two fan types by process. Moderately strong correlations exist, on both debris‐?ow and ?uvial fans, between basin area or Melton's R and fan area. Correlations between basin area or Melton's R and fan gradient are generally weaker. The results of this study also indicate that on debris‐?ow‐prone fans the fan gradient and basin Melton's R have lower thresholds which overlap little with upper thresholds associated with basins where only stream?ow reaches the fan. These thresholds may therefore have value in preliminary morphometric assessments of debris‐?ow hazard on fans in the Southern Alps. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
9.
Catchment lithology as a major control on alluvial megafan development,Kohrud Mountain range,central Iran 总被引：1，自引：0，他引：1
Nasser Arzani 《地球表面变化过程与地形》2012,37(7):726-740
The relative importance of tectonics, climate, base level and source lithology as primary factors on alluvial‐fan evolution, fan morphology and sedimentary style remain in question. This study examines the role of catchment lithology on development and evolution of alluvial megafans (>30 km in length), along the flanks of the Kohrud Mountain range, NE Esfahan, central Iran. These fans toe out at axial basin river and playa‐fringe sediments towards the centre of basin and tectonics, climatic change and base‐level fluctuations, were consistent for their development. They formed in a tectonically active basin, under arid to semiarid climate and a long term (Plio‐Pleistocene to Recent) change from wetter to drier conditions. The key differences between two of these fans, Soh and Zefreh fans, along the west and south flanks of this mountain range, is that their catchments are underlain by dissimilar bedrock types. The source‐area lithologies of the Soh and Zefreh fans are in sedimentary and igneous terrains, respectively, and these fans developed their geometry mainly in response to different weathering intensities of their catchment bedrock lithologies. Fan surface mapping (based on 1/50000 topographic maps, satellite images, and fieldwork), reveals that the geomorphic evolution of these fans differs in that the relatively large‐scale incision and through trenching of the Soh fan is absent in the Zefreh fan. Whereas the limited sediment supply of the Soh fan has resulted in a deep incised channel, the Zefreh fan has remained aggradational with little or no trenching into proximal to medial fan surface due to its catchment bedrock geology, composed mainly by physically weathered volcaniclastic lithology and characterized by high sediment supply for delivery during episodic flash floods. Sediment supply, which is mainly a function of climate and source lithology, is a dominant driver behind the development of fan sequences in alluvial megafans. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
The Edwards artesian aquifer occurs in cavernous limestones of Cretaceous (Albian) age within the Balcones fault zone in south-central Texas. The major recharge and discharge zones of the aquifer are contained within the upper reaches of three river systems: the Nueces, the San Antonio, and the Guadalupe. Within these watersheds, recharge dominates in the semiarid Nueces basin to the west while most discharge occurs farther east from wells in the subhumid San Antonio basin and from springs in the subhumid Guadalupe basin. This long-distance transfer of ground water (up to 240 km) is a result of several factors: depositional and early diagenetic history of the limestone host rock, geometry and magnitudes of fault displacement, and physiographic responses to faulting. The loci of greatest discharge from the aquifer occur in an area that was exposed subaerially with concomitant porosity enhancement due to dissolution of limestone during late Early Cretaceous time. This area also was subjected to the greatest fault displacement during Miocene time. Thus, faults and associated joints superimposed additional avenues for porosity and permeability development onto an area that already had considerable secondary porosity. Further determinants on aquifer properties resulted from late Tertiary and Quaternary drainage evolution in response to faulting along the Balcones trend. The strike of the fault zone lay at acute angles to the courses of the main trunk streams in the ancestral Guadalupe and San Antonio River systems, whereas in the Nueces basin the trend of the fault zone was normal to the courses of the main streams. Thus, as a fault-line scarp began to form in the eatern basins, scarp-normal streams were incised rapidly into northwest-trending canyons. These steep-gradient streams captured the eastward-flowing major streams in the easten watersheds. These pirate streams incised into the aquifer at the lowest topographic levels within the region because of: 1. The sudden acquisition of extensive catchment areas in a subhumid area; and 2. Steep stream gradients that reflected the larger fault displacement in the east. The low topographic points of discharge became the loci of major springs. Recharge is dominant in the Nueces basin mainly because streams cross permeable limestone units at higher topographic levels than in the San Antonio and Guadalupe basins. The topographic characteristics of the Nueces watershed resulted from a combination of diverse factors: lesser fault displacement, no major stream piracy, and less vigorous erosion because of a semiarid climate. 相似文献
11.
Jiongxin Xu 《水文科学杂志》2013,58(10):1926-1940
ABSTRACTThe tributary–trunk stream relationship is investigated with respect to hyperconcentrated flows and coupled wind–water processes in the Yellow River, China. Ten small tributaries that drain only 3% of the total drainage area of the trunk stream transport large amounts of relatively coarse sediment from the desert to the trunk stream during hyperconcentrated floods. The resultant strong sedimentation often jams the trunk stream, leading to serious disasters. This study reveals the cause of this interesting phenomenon and proposes countermeasures for disaster reduction. A typical sediment-jamming event (SJE) in July 1989 was thoroughly analysed based on the observational data, including the beginning, development and final stages of the event. An index of the geomorphologic effectiveness of the tributary on the trunk stream and a number of indices describing SJEs and the influencing factors are adopted, based on which a discrimination relationship for the occurrence of SJEs is established and some statistical relationships are also established. The SJE’s hydrological and geomorphologic impacts are discussed at short timescales (from several days to one month) and at long time scales (up to 46 years). The results may help to gain a new insight into the study of the tributary–trunk stream relationship, and provide useful information for sediment management and disaster-reduction planning in the drainage basin. Countermeasures are suggested to reduce the channel sedimentation and the risk of sediment-jamming disaters.
Editor M.C. Acreman Associate editor Q. Zhang 相似文献
12.
Randy W. Dirszowsky 《地球表面变化过程与地形》2004,29(5):533-552
The geochemical, mineralogical and lithological composition of modern stream bed material is examined in order to characterize sources and evaluate downstream mixing of sediments in the upper Fraser River drainage basin, British Columbia. The <63 µm fraction is emphasized for its relative mobility and ease of analysis using instrumental neutron activation. Overall, the composition of the stream sediments closely re?ects bedrock distribution. Samples dominated by limestone and dolostone, calcite and dolomite, and related elements (Ca, Mg, Sr etc.) correspond to Lower and Middle Cambrian carbonate bedrock largely con?ned to the Moose River sub‐basin. Clastic and non‐quartzite metamorphic lithologies, primary and secondary aluminosilicate minerals and related elements (Al, Cs, Rb etc.) are largely derived from Miette Group bedrock and associated with the uppermost Fraser River sub‐basin. Except in the case of the Moose River/Fraser River junction, the determination of proportional tributary contributions is complicated by variable or delayed mixing, localized ?oodplain or valley side sources, and limited contrast between source areas. At present the Moose River sub‐basin contributes a greater proportion of the total and ?ne‐grained sediment loads of the combined Fraser River than would be expected from drainage basin area alone. The imbalance is related to greater relief, precipitation and runoff in the Moose River sub‐basin; however, the spatial association of carbonate‐rich stream sediments, ice cover and carbonate bedrock exposure indicates that glaciers play a particularly important roll in generating ?ne‐grained ?uvial sediment. Since differences in glacier cover and glacier potential in the two major sub‐basins are likely to be persistent, and since relative sediment yields from the sub‐basins can be determined from sediment composition, a potential indicator of glacier variation and climate change during the Holocene is therein available. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
13.
Lithology‐controlled evolution of stream bed sediment and basin‐scale sediment yields in adjacent mountain watersheds,Idaho, USA 下载免费PDF全文
下载免费PDF全文 The composition, grain‐size, and flux of stream sediment evolve downstream in response to variations in basin‐scale sediment delivery, channel network structure, and diminution during transport. Here, we document downstream changes in lithology and grain size within two adjacent ~300 km2 catchments in the northern Rocky Mountains, USA, which drain differing mixtures of soft and resistant rock types, and where measured sediment yields differ two‐fold. We use a simple erosion–abrasion mass balance model to predict the downstream evolution of sediment flux and composition using a Monte Carlo approach constrained by measured sediment flux. Results show that the downstream evolution of the bed sediment composition is predictably related to changes in underlying geology, influencing the proportion of sediment carried as bedload or suspended load. In the Big Wood basin, particle abrasion reduces the proportion of fine‐grained sedimentary and volcanic rocks, depressing bedload in favor of suspended load. Reduced bedload transport leads to stronger bed armoring, and coarse granitic rocks are concentrated in the stream bed. By contrast, in the North Fork Big Lost basin, bedload yields are three times higher, the stream bed is less armored, and bed sediment becomes dominated by durable quartzitic sandstones. For both basins, the geology‐based mass balance model can reproduce within ~5% root‐mean‐square error the composition of the bed substrate using realistic erosion and abrasion parameters. As bed sediment evolves downstream, bedload fluxes increase and decrease as a function of the abrasion parameter and the frequency and size of tributary junctions, while suspended load increases steadily. Variable erosion and abrasion rates produce conditions of variable bed‐material transport rates that are sensitive to the distribution of lithologies and channel network structure, and, provided sufficient diversity in bedrock geology, measurements of bed sediment composition allow for an assessment of sediment source areas and yield using a simple modeling approach. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
14.
Recent studies of sediment delivery and budgets in the United States indicate that upland erosion rates at a given time may not explain contemporaneous sediment yields from a drainage basin. This suggests temporal discontinuities in sediment delivery associated with hillslope and channel storage processes. Integration of sediment production, storage and transport is essential to understand sediment routing in basins. We analysed each process chronologically using aerial photographs, monitoring data of sediment movement and annual tree-rings, and then compared estimated temporal changes in sediment production from hillslopes, floodplain disturbance areas and sediment transport in river channels. Toeslopes, floodplains and alluvial fans together contained 59 per cent of sediment eroded from uplands over the last 30 years. Monitoring results of riverbed changes showed that the volume of stored sediment on floodplains decreased exponentially with succeeding floods. The age distribution of floodplain deposits reflected the disturbance history of a river channel, and followed an exponential decrease with age. The results of this study may have important implications for sediment control plans for watersheds in steep regions. 相似文献
15.
The geomorphology of the central Coastal Range, a north-south trending horst along the west coast of northern Calabria, is governed largely by major faults, fault scarps and the distribution of principal rock types, as well as by a variety of slope processes operative in a Mediterranean climate. Segments of the major rivers and streams have three principal orientations parallel to major faults in the study area: northwest right-oblique slip faults (oldest); E-W oblique slip faults; NE left-oblique slip faults; and north-south right oblique normal faults (youngest), all of which cut pre-Tertiary metamorphic rocks, Mesozoic limestone, Miocene molasse and calcarenite. Small, underfit alluvial fans, composed chiefly of locally derived debris flow detritus, are present at the mouths of large, west-flowing canyons, some of which reach eastward to the crest of the mountain range. Not only do the north-south normal faults displace rocks and structures of all orientations, but they also make steep scarps in the small alluvial fans and in sediments of the coastal plain. Locally, some of the scarps are buried by recent debris flow deposits. Incipient young rivers utilized the weaknesses along the major faults and cracks as avenues of erosion. Smaller streams and gullies generally flowed westward downflank of the north-trending horst and incised, thereby, deep, V-shaped canyons; some of them have captured older, SW-flowing canyons. Locally, they were guided in other directions where they encountered faults or tectonic fractures. The rocks present a varied resistance to erosion, depending upon the degree of cementation by groundwater salts, upon the orientation of the foliation, and upon the rocks themselves. Thus, mica schist with a relatively flat foliation forms nearly vertical sea cliffs, but the sea cliffs are more gentle where the foliation is steep or dips towards the sea. Therefore, downslope movements are facilitated by seaward slip on foliation, schistosity, bedding and fault surfaces, and are evinced especially by large and deep pre-Holocene landslides (Sackung) in phyllite having areal dimensions up to 2 Km2. Other downslope processes include surficial creep and soil slip, particularly of highly fractured phyllite and schist, block sliding and rock falls. 相似文献
16.
Nahal Paran drains 3600 km2 of Egypt's Sinai peninsula and Israel's Negev Desert. Much of the channel is alluvial, but a canyon 10·5 km long has been incised into Late Cretaceous chert and dolomite in the lower portion of the basin. Slackwater deposits and paleostage indicators preserved within the canyon record approximately 10 floods of 200 to 2500 m3 s?1 over a period of at least 350 years. Step-backwater simulations of flood-flow hydraulics indicate extreme variations in stream power per unit area along the length of the canyon, and associated variability in energy expenditure and sediment transport. These variations reflect channel cross-sectional morphology. The greatest values of stream power occur along the lower half of the study reach, in association with three pronounced knickpoints and an inner channel. The locations of these features reflect the exposure of thick, resistant chert layers along the channel. The presence of several similar, but buried and inactive, knickpoints along the upper study reach indicates that the locus of most active channel incision has shifted with time, probably in response to baselevel changes associated with tectonic activity along the Dead Sea Rift. Thus, the rate and manner of channel incision along the canyon of Nahal Paran are controlled by lithologic variability and tectonic uplift as they influence channel morphology and gradient, which in turn influence hydraulics and sediment transport. 相似文献
17.
Large wood along rivers influences entrainment, transport, and storage of mineral sediment and particulate organic matter. We review how wood alters sediment dynamics and explore patterns among volumes of in‐stream wood, sediment storage, and residual pools for dispersed pieces of wood, logjams, and beaver dams. We hypothesized that: volume of sediment per unit area of channel stored in association with wood is inversely proportional to drainage area; the form of sediment storage changes downstream; sediment storage correlates with wood load; the residual volume of pools created in association with wood correlates inversely with drainage area; and volume of sediment stored behind beaver dams correlates with pond area. Lack of data from larger drainage areas limits tests of these hypotheses, but the analyses suggest that sediment volume correlates positively with drainage area and wood volume. The form of sediment storage in relation to wood appears to change downstream, with wedges of sediment upstream from jammed steps most prevalent in small, steep channels and more dispersed sediment storage in lower gradient channels. Pool volume correlates positively with wood volume and negatively with channel gradient. Sediment volume correlates well with beaver pond area. More abundant in‐stream wood and beaver populations present historically equated to greater sediment storage within river corridors and greater residual pool volume. One implication of these changes is that protecting and re‐introducing wood and beavers can be used to restore rivers. This review of the existing literature on wood and sediment dynamics highlights the lack of studies on larger rivers. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
18.
This study analyses large wood (LW) storage and the associated effects on channel morphology and flow hydraulics in three third‐order mountain basins (drainage area 9–12 km2) covered in old‐growth Nothofagus forests, ranging from the temperate warm Chilean Andean Cordillera to the sub‐Antarctic Tierra del Fuego (Argentina). Amount, characteristics and dimensions of large wood (>10 cm diameter, >1 m long) were recorded, as well as their effects on stream morphology, hydraulics and sediment storage. Results show that major differences in LW abundance exist even between adjacent basins, as a result of different disturbance histories and basin dissection. Massive LW volumes (i.e. >1000 m3 ha?1) can be reached in basins disturbed by fires followed by mass movements and debris flows. Potential energy dissipation resulting from wood dams is about a quarter of the total elevation drop in two streams, with a gross sediment volume stored behind wood dams of around 1000 m3 km?1, which appears to be of the same order as the annual sediment yield. Finally, the presence of wood dams may increase flow resistance by up to one order of magnitude. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
19.
ABSTRACT Theoretically, a small drainage basin may be divided into equal areas of downward flow and upward flow of groundwater. In regions where surface water does not obscure the phenomena produced by groundwater, these areas can be differentiated by mapping springs, seepages, groundwater levels, flowing wells, chemical quality of water, natural vegetation, salt precipitates, quality of crops, soap holes, and moist and dry depressions. Mapping and interpretation of field phenomena have been carried out in a section of the Ghostpine Creek valley in a Prairie environment. The relief is gently rolling, the geology is simple, and the climate is cold, humid, and continental. The area of the “north flow-systems” is apportioned as follows: 26 per cent underlain by downward flow; 42 per cent underlain by a mid-line area; and 32 per cent underlain by upward flow. Noting that groundwater flow is nearly parallel to the water table in the vicinity of the mid-line these results comply with the above-mentioned theory of groundwater flow distribution in small drainage basins. Thus, the method is suggested for: 1. A reconnaissance study of the groundwater regime in certain areas, and 2. Specific problems related to groundwater in a Prairie environment, such as: finding suitable locations for dug-out type water supplies, estimating prospects for slough-draining and irrigation, and explanation of the development of certain soil types. For such purposes, the method appears to be competitive with test drilling. 相似文献
20.
Kazuo Kimura 《Island Arc》1999,8(1):99-113
The geomorphology and related geostructures in the region of the dun valleys in Nepal (e.g. the Deukhuri Dun, the Chitwan Dun, the Hetauda Dun and the Trijuga Dun) have been surveyed in order to understand the neotectonics along the Himalayan front. The sub-Himalayan intermontane basins developed as piggyback basins located on the thrust-sheet of the Himalaya Front Fault (HFF equivalent to the Frontal Churia Thrust, the Main Siwalik Thrust or the Main Frontal Thrust). Each piggyback basin is a result of the north-northeast–south-southwest crustal shortening between the Indian Shield and the Himalayas. The evolution of the dun valleys is recorded as current reversals between the Upper Siwalik Group and the basin fills. The Upper Siwalik Group formed as piedmont alluvial fans distributed along the foot of the Lesser Himalaya and/or the Inner Churia Range, and show predominantly southerly current directions. In contrast, the basin fills distributed along the southern margin of the dun valleys formed by north-flowing drainage systems. The oldest basin fills of the piggyback basins appear to have commenced by the middle Pleistocene in the Deukhuri Dun and the Chitwan Dun, by the late Pleistocene in the Hetauda Dun, and by the latest Pleistocene in the Trijuga Dun. The diachronous evolution of the dun valleys suggest that the morphogenesis of the HFF zone was controlled by west-to-east propagation in late Quaternary time. These morphotectonics suggest the oblique-slip thrusting of the HFF zone which can be related to the oblique convergence between the Indian Shield and the Himalayas, and/or the counter-clockwise rotation of the Indian Subcontinent. 相似文献