首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
The chemical associations of Cd, Cu, Pb, and Zn in four mine soil samples from the Amizour-Bejaia Pb/Zn mine (Algeria) have been investigated by a five-step sequential extraction procedure. Although Cd preferentially binds to carbonates, Cu, Pb, and Zn are mainly associated with the organic and reducible fractions. Batch adsorption experiments with either mono- or multi-metallic solutions are described with the Freundlich isotherm model. Whatever the nature of the soil sample, the sorption behavior for each given metal except Pb is very similar, indicating that the binding sites at the soil surface are progressively occupied by the metal from the solution. On each soil sample, the decreasing order of sorption can be established as Pb >> Cu > Cd > Zn. When the four metals are simultaneously applied to each soil sample, their specific behavior is strongly affected by their interactions and/or competition for the available surface sites: we generally observed isotherm curves with a slight maximum before the plateau at higher solution concentration. Although Cu is only slightly affected by the other metals, in the case of Pb, Cd, and Zn, the sorbed amounts strongly decreased.  相似文献   

2.
Sorption of metals on humic acid   总被引：1，自引：0，他引：1  
The sorption on humic acid (HA) of metals from an aqueous solution containing Hg(II). Fe(III), Pb, Cu, Al, Ni, Cr(III), Cd, Zn, Co and Mn, was investigated with special emphasis on effects of pH, metal concentration and HA concentration. The sorption efficiency tended to increase with rise in pH, decrease in metal concentration and increase in HA concentration of the equilibrating solution. At pH 2.4. the order of sorption was: Hg? Fe? Pb? CuAl ? Ni ? CrZnCdCoMn. At pH 3.7. the order was: Hg and Fe were always most readily removed, while Co and Mn were sorbed least readily. There were indications of competition for active sites (CO2H and phenolic OH groups) on the HA between the different metals. We were unable to find correlations between the affinities of the eleven metals to sorb on HA and their atomic weights, atomic numbers, valencies, and crystal and hydrated ionic radii. The sorption of the eleven metals on the HA could be described by the equation Y = 100[1 + exp ? (A + BX)], where Y = % metal removed by HA; X = mgHA; and A and B are empirical constants.  相似文献   

3.
The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.  相似文献   

4.
Runoff was collected from three different roofing materials that are commonly used for roofing in Ile-Ife, Nigeria, between the months of June to August, 2004. The samples were collected in four geographical locations in the town. The run offs were analysed for pH, Temp, TDS, CI?, S04 2?, PO4 3? N03 2?, EC and some heavy metals both as regards total, dissolved and particulate fractions. Analysis of the heavy metals was done using flame Atomic Absorption Spectrophotometer. The quantity of these parameters varies with the different roofing materials. In terms of dissolved metals, Fe is the most predominant metal with mean values 0.59 ± 0.29, 0.82 ± 0.14, and 1.04 ± 0.27 mg/L for asbestos, ceramic tiles and metal sheets respectively. The tendency of the roofing materials to release dissolved metals is arranged as follows: Zn, Cr and Fe (metal sheet > Ceramic > asbestos); Cd and Pb (asbestos > ceramic > metal sheet). In terms of particulate metals, the concentration of Cd and Pb are higher in the asbestos than other roofing stuffs. The sequence of their predominance in asbestos is as follows: Pb (0.83±0.55 mg/L) > Cd (0.29 ± 0.07 mg/L). In all the roofs, both particulate and dissolved metals except Zn exceeded WHO permissible limits for drinking water. The high levels of the metals obtained in this study may likely result in consumer complaints since some of the metals are not only carcinogenic but are also liable of impacting bad taste in water.  相似文献   

5.
《Applied Geochemistry》2003,18(11):1723-1731
The mobility and bioavailability of heavy metals depends on the metal retention capacity of soil and also on the geochemical phases with which metals are associated. Laboratory batch experiments were carried out to study the sorption and distribution of Cd, Ni and Pb in 3 soils differing in their physicochemical properties from India: Oxyaquic Haplustalf (SL1), Typic Haplustalf (SL2) and Typic Haplustert (SL3). The heavy metal adsorption was studied by isotherms and the distribution coefficient (KD) for each metal was obtained from the linear regressions of the concentration of metal remaining in equilibrium solution and the amount adsorbed. In general, the sorption capacity for all the metals decreased in the order: SL3>SL2>SL1. Among metals, the sorption capacity in all the soils decreased in the order: Pb>>Ni>Cd. Distribution of sorbed metals at various equilibrating concentrations was studied by sequential extraction. Results showed significant differences in the distribution of metals in these soils. At higher additions (such as 200 μM l−1) most of the metals were extracted in their more mobile fractions, exchangeable and/or inorganic in contrast to their original partitioning in soils, where they were preferentially associated with the less mobile residual fraction. Largest percentages of metals extracted in the exchangeable fraction corresponded to those soil–metal systems with smaller KD values, e.g. Cd, Ni and Pb in SL1 and Cd and Ni in SL2. In neutral and alkaline soils (SL2, pH=7.1, and SL3, pH=8.6) Pb was predominantly extracted from the inorganic fractions and this corresponded to higher KD values for Pb in these soils. The predominance of metals associated with the exchangeable fraction together with low KD values indicates higher mobility of metals retained in the acidic soil (SL1, pH=5.2) compared with the others.  相似文献   

6.
盐岩矿的水溶法开采是获得人类生活必需品和重要工业原料——盐的重要途径之一。在水溶法开采中,岩盐矿中的水溶性重金属会随着母液到达地表环境和后续的岩盐产品中,可能对地表环境造成污染和危害人体健康,故对岩盐矿中水溶性重金属的检测非常重要。岩盐矿中的水溶性铜铅锌镉含量较低,而盐分含量过高,过高的盐分含量会影响ICP-OES的雾化效率,故很难用ICP-OES直接测量重金属含量。本文以巯基棉为吸附材料,从溶液pH、洗脱液浓度、洗脱液体积等方面研究了分离富集岩盐矿中水溶性铜铅锌镉的实验条件。结果表明,在pH=7的介质中,巯基棉对铜铅锌镉有良好的吸附性能,被吸附的铜铅锌镉可用7 m L盐酸(15%)定量洗脱,溶液中的钠对吸附无明显影响。对解吸后的溶液,铜铅锌镉的回收率均≥92.2%,钠回收率仅0.04%,基本实现了铜铅锌镉与钠的分离,达到了ICP-OES检测要求。  相似文献   

7.
An exploratory study on soil contamination of heavy metals was carried out surrounding Huludao zinc smelter in Liaoning province, China. The distribution of total heavy metals and their chemical speciations were investigated. The correlations between heavy metal speciations and soil pH values in corresponding sites were also analyzed. In general, Cd, Zn, Pb, Cu and As presented a significant contamination in the area near the smelter, comparied with Environmental Quality Standards for Soils in China. The geoaccumulation index showed the degree of contamination: Cd > Zn > Pb > Cu > As. There was no obvious pollution of Cr and Ni in the studied area. The speciation analysis showed that the dominant fraction of Cd and Zn was the acid soluble fraction, and the second was the residual fraction. Pb was mostly associated with the residual fraction, which constituted more than 50% of total concentration in all samples. Cu in residual fraction accounted for a high percentage (40–80%) of total concentration, and the proportion of Cu in the oxidizable fraction is higher than that of other metals. The distribution pattern of Pb and Zn was obviously affected by soil pH. It seemed that Pb and Zn content in acid solution fraction increased with increasing soil pH values, while Cd content in acid soluble fraction accounted for more proportion in neutral and alkaline groups than acidic one. The fraction distribution patterns of Cu in three pH groups were very similar and independent of soil pH values. And the residual fraction of Cu took a predominant part (50%) of the total content.  相似文献   

8.
《Applied Geochemistry》2005,20(8):1533-1545
Spring waters were analysed in the field by anodic stripping voltammetry, using equipment which is sufficiently portable to be useful in a remote heavily forested area accessible by foot only. The equipment and techniques are capable of producing analyses on site to the μg/L level for labile metals. Field analysis avoids issues of sample storage and transport protocols that limit confidence in laboratory measurements of labile elements. Samples were taken as a feedback to immediate analysis resulting in a fine grid map of the geological site. Acid rock drainage emanates from a New Zealand historic mine site, with elevated concentrations of metals. However, ground water and surface water discharging naturally from mineralised rocks in the same area also have elevated levels of metals. This study quantifies natural metalliferous discharges from a single site, and compares this to the overall metal flux from the mine area. Acid (pH 3) metalliferous springs emanate from colluvium and bedrock in a young (months-old) landslide. Labile Cu, Pb, Zn and Cd are the environmentally most significant metals in the studied area. Labile metal concentrations observed in the natural springs are up to 24 μg/L Cu, up to 50 μg/L Pb, up to 5 μg/L Cd and up to 9 mg/L Zn. Labile Cu and Zn concentrations are similar to laboratory-determined total concentrations, whereas labile Pb and Cd concentrations are generally distinctly lower than total Pb and Cd concentrations. Four different spring water compositions occur within metres of each other: acid metalliferous water with high Pb, acid metalliferous water with low Pb, high Cu, Pb, Zn acid water and high pH water with elevated Cu. High metal concentrations in these waters are readily attenuated by adsorption to Fe oxyhydroxides (HFO), especially when rain raises spring water pH at the surface. Copper, Pb and Cd are >99% adsorbed, and Zn >95% adsorbed, during this rainfall dilution. Natural spring waters have potential to contribute up to 10% of the total Zn flux from the catchment, but negligible proportions of Cu, Pb and Cd.  相似文献   

9.
To assess the competitive sorption and desorption of cadmium (Cd) and lead (Pb), batch equilibrium experiments were performed using single- and binary-metal solutions in surface samples of three paddy soils from eastern China. Sorption isotherms were well fitted with one-metal and competitive Langmuir equation for single- and binary-metal system, respectively. The distribution coefficient (K d) values were K d single (Pb) > K d binary (Pb) > K d single (Cd) > K d binary (Cd), indicating that Pb was stronger sorbed by these soils than Cd in binary metal system. Soils with high pH and clay content had the greatest sorption capacity as estimated by the maximum sorption parameter (Q). The co-existence of both metals reduces their tendency of sorption, whereas Cd sorption was affected to a greater extent than that of Pb. The Langmuir binding strength parameter (b) in binary sorption system was greater than that in single sorption system for all soils (b < b 1), indicating that competition for sorption sites promote the retention of both metals into more specific sorption sites. Sorption of Cd and Pb decreased soil pH by 1.61 U for YRS, 1.39 U for PCS, and 0.91 U for SLS. The decreases of pH in binary metal system were greater than in single-metal system for three soils. Cadmium and Pb desorption increased with increasing Cd and Pb sorption saturation for all soils; however, Cd desorption ratio in binary metal system (d Cd*) was much greater than Pb (d Pb*), indicating that under the competitive sorption conditions, the sorbed Cd was more readily desorbed from the soils than the sorbed Pb.  相似文献   

10.
《Applied Geochemistry》2002,17(5):569-581
This study examined the sorption of trace metals to precipitates formed by neutralization of 3 natural waters contaminated with acid mine drainage (AMD) in the former Ducktown Mining District, Tennessee. The 3 water samples were strongly acidic (pH 2.2 to 3.4) but had distinctively different chemical signatures based on the mole fractions of dissolved Fe, Al and Mn. One sample was Fe-rich (Fe=87.5%, Al=11.3%, and Mn=1.3%), another was Al-rich (Al=79.4%, Mn=18.0%, and Fe=2.5%), and the other was Mn-rich (Mn=51.4%, Al=25.7%, and Fe=22.9%). In addition, these waters had high concentrations of trace metals including Zn (37,700 to 17,400 μg/l), Cu (13,000 to 270 μg/l), Co (1,500 to 520 μg/l), Ni (360 to 75 μg/l), Pb (30 to 8 μg/l), and Cd (30 to 6 μg/l). Neutralization of the AMD-contaminated waters in the laboratory caused the formation of either schwertmannite at pH<4 or ferrihydrite at pH>4. Both phases were identified by XRD analyses of precipitates from the most Fe-rich water. At higher pH values (∼5) Al-rich precipitates were formed. Manganese compounds were precipitated at pH∼8. The removal of trace metals depended on the precipitation of these compounds, which acted as sorbents. Accordingly, the pH for 50% sorption (pH50) ranged from 5.6 to 7.5 for Zn, 4.6 to 6.1 for Cu, 5.4 to 7.7 for Ni, 5.9 to 7.9 for Co, 3.1 to 4.3 for Pb, and 5.5 to 7.7 for Cd. The pH dependence of sorption arose not only because of changes in the sorption coefficients of the trace metals but also because the formation and composition of the sorbent was controlled by the pH, the chemical composition of the water, and the solubilities of the oxyhydroxide-sulfate complexes of Fe, Al, and Mn.  相似文献   

11.
The adsorption of thirteen trace metals from seawater was studied on interfacial sediment from MANOP site H. The adsorption data indicate a long (~20 day) equilibration time for most metals, an increase in adsorption with an increase in pH and particle concentration, a dependence of adsorption on total metal concentration at high adsorption densities, and a lack of correlation between metal binding ability and metal hydrolysis in solution.Apparent equilibrium binding constants normalized to the total number of available sites on the solid were determined for metal binding with the interfacial sediment. The binding constants indicate that the affinity sequence for metal interactions with the interfacial sediment is: Pb > Fe > Sn ? Co≈ Mn > Cu > Be > Sc ? Zn > Ni > Cd ? Ba > Cs at pH 7.82 in seawater.A comparison of the binding constants for suspended particles, interfacial sediment, and surface sediment indicate that the composition of particles influences the binding ability of the particles. Biogenic particles tend to bind most metals more strongly than lithogenic or authigenic particles.Based on limited data, there is a strong positive correlation between the measured binding constants and the observed partitioning of metals between sediment and seawater.  相似文献   

12.
Simultaneous competitive adsorption behavior of Cd, Cu, Pb and Zn onto nine soils with a wide physical–chemical characteristics from Eastern China was measured in batch experiments to assess the mobility and retention of these metals in soils. In the competitive adsorption system, adsorption isotherms for these metals on the soils exhibited significant differences in shape and in the amount adsorbed. As the applied concentration increased, Cu and Pb adsorption increased, while Cd and Zn adsorption decreased. Competition among heavy metals is very strong in acid soils with lower capacity to adsorb metal cations. Distribution coefficients (K dmedium) for each metal and soil were calculated. The highest K dmedium value was found for Pb and followed by Cu. However, low K dmedium values were shown for Zn and Cd. On the basis of the K dmedium values, the selectivity sequence of the metal adsorption is Pb > Cu > Zn > Cd and Pb > Cu > Cd > Zn. The adsorption sequence of nine soils was deduced from the joint distribution coefficients (K dΣmedium). This indicated that acid soils with low pH value had lower adsorption capacity for heavy metals, resulting in much higher risk of heavy metal pollution. The sum of adsorbed heavy metals on the soils could well described using the Langmuir equation. The maximum adsorption capacity (Q m) of soils ranged from 32.57 to 90.09 mmol kg−1. Highly significant positive correlations were found between the K dΣmedium and Q m of the metals and pH value and cation exchange capacity (CEC) of soil, suggesting that soil pH and CEC were key factors controlling the solubility and mobility of the metals in soils.  相似文献   

13.
The bioavailability and fate of heavy metals in the environment are often controlled by sorption reactions on the reactive surfaces of soil minerals. We have developed a non-electrostatic equilibrium model (NEM) with both surface complexation and ion exchange reactions to describe the sorption of Pb and Cd in single- and binary-metal systems over a range of pH and metal concentration. Mineralogical and exchange properties of three different acidic soils were used to constrain surface reactions in the model and to estimate surface densities for sorption sites, rather than treating them as adjustable parameters. Soil heterogeneity was modeled with >FeOH and >SOH functional groups, representing Fe- and Al-oxyhydroxide minerals and phyllosilicate clay mineral edge sites, and two ion exchange sites (X− and Y−), representing clay mineral exchange. An optimization process was carried out using the entire experimental sorption data set to determine the binding constants for Pb and Cd surface complexation and ion exchange reactions.Modeling results showed that the adsorption of Pb and Cd was distributed between ion exchange sites at low pH values and specific adsorption sites at higher pH values, mainly associated with >FeOH sites. Modeling results confirmed the greater tendency of Cd to be retained on exchange sites compared to Pb, which had a higher affinity than Cd for specific adsorption on >FeOH sites. Lead retention on >FeOH occurred at lower pH than for Cd, suggesting that Pb sorbs to surface hydroxyl groups at pH values at which Cd interacts only with exchange sites. The results from the binary system (both Pb and Cd present) showed that Cd retained in >FeOH sites decreased significantly in the presence of Pb, while the occupancy of Pb in these sites did not change in the presence of Cd. As a consequence of this competition, Cd was shifted to ion exchange sites, where it competes with Pb and possibly Ca (from the background electrolyte). Sorption on >SOH functional groups increased with increasing pH but was small compared to >FeOH sites, with little difference between single- and binary-metal systems. Model reactions and conditional sorption constants for Pb and Cd sorption were tested on a fourth soil that was not used for model optimization. The same reactions and constants were used successfully without adjustment by estimating surface site concentrations from soil mineralogy. The model formulation developed in this study is applicable to acidic mineral soils with low organic matter content. Extension of the model to soils of different composition may require selection of surface reactions that account for differences in clay and oxide mineral composition and organic matter content.  相似文献   

14.
 Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by keeping pollutants from spreading over the surrounding area. In the current work, eight core samples were collected from the bottom of a retention pond located along the A-71 motorway in Sologne to study the pollution of sediment by heavy metals and their diagenetic behaviour. The vertical concentration profiles of metals (Pb, Zn, Cd, Fe and Mn) in sediment as well as in interstitial water were determined. Especially in the case of the sediment, a sequential extraction method was employed to investigate how the movement of each metal is associated with the other metals and with other solid phases such as organic matter. In addition, to investigate the relative mobility of the metals, the distribution coefficients (KD) were also determined. The concentrations of the metals were always found to be highest in the topmost layer of sediment. This so-called surface enrichment is caused by a substantial increase of the non-detrital fraction of these metals at the sediment surface. For instance, the accumulation of Pb and Zn is associated with the increase in the "fraction II" in the sequential extraction. The accumulation of Cd at the surface (0–2 cm) is partly due to the liberation of Cd from the particles during early diagenesis. However, the major factor contributing to the accumulation of Cd at the sediment surface is attributed to the dissolution of Cd from polluted roadside soil during the periods of rainstorms and its subsequent redeposition on the sediment surface after being carried to the retention pond. KD values for Zn and Cd were found to decrease with depth, while KD values for Pb increased. Based on the KD values, the relative mobilities of the studied metals were determined to be as follows: Mn>Zn>Cd>Pb, for the upper layer, and Mn>Cd>Zn>Pb, for the layers below. Received: 28 October 1996 / Accepted: 21 November 1996  相似文献   

15.
The removal efficiency of water hyacinth for Zn, Cu, Pb and Cd after their entry into an undisturbed fresh water body was studied using minicosms placed within a reservoir. Variable parameters were water pH (6 or 8), single or multi-metal additions, and the plant biomass. The initial concentrations of Zn, Cu, Pb and Cd in water (500, 250, 250 and 50 μg/L, respectively) quickly decreased in the order Pb ≈ Cu ? Cd ≈ Zn in the first days. Metal removal was more efficient at pH 8 than at pH 6, and it was only slightly higher for single metals compared to multi-metal additions. After 8 days the remaining amounts of metals relative to their initial concentrations for multi-metal pollution treatments were 8% and 24% (Cu), 11% and 26% (Pb), 24% and 50% (Cd), and 18% and 57% (Zn) at pH 8 and pH 6, respectively. Increasing plant biomass promoted faster metal removal. The bioconcentration factor (the ratio of the metal concentration in whole plants to the initial metal concentration in water) exceeds 2000 for all metals (with the exception of Zn and Cd at pH 6). It was concluded that the water hyacinth can be successfully used for fast removal of metals in the initial stage of water body remediation.  相似文献   

16.
The presence of heavy metal concentrations was examined in natural sediments from four sites along the Jajrood river in northeast of Tehran, the capital of Iran. Besides determination of elemental concentrations (Pb, Cu, Zn, Cd, Ni and Cr), X-ray fluorescence and X-ray diffraction tests were carried out to determine other chemical components in these adsorbents. Also the ability of sediments to adsorb these heavy metal ions from aqueous solutions was investigated. Results show that the extent of adsorption increases with increase in adsorbent concentration. The amount of adsorbed Pb, Cu and Zn in sediments was much greater than that of the other metals, and Cr was adsorbed much less than others. The adsorbabilities of sediments to heavy metals increased in the order of Pb > Cu > Zn > Cd > Ni > Cr. Based on the adsorption data, equilibrium isotherms were determined at selected areas to characterize the adsorption process. The adsorption data followed Freundlich and Langmuir isotherms in most cases. Correlation and cluster analysis was performed on heavy metals adsorption and sediment components at each site to evaluate main adsorbing compounds in sediments for each metal. Results demonstrated that heavy metals sorption is mostly related to load of organic matter in the Jajrood river sediments.  相似文献   

17.
Groundwater pollution is a major global environmental issue especially in the large cities and trace metals are considered as most important aquatic pollutants. The present study is based on the measurement and characterization of various physicochemical parameters (pH, EC, TDS, DO, alkalinity, hardness, and chloride), major cations (Ca, Mg, Na and K) and selected trace metals (Sr, Li, Fe, Zn, Cu, Co, Mn, Ag, Cd, Cr, Ni, and Pb) in the groundwater of Lahore, Pakistan during summer and winter (2017–18) seasons. Groundwater is the main source of drinking water in urban areas of Lahore. Seasonal comparison of the data indicated that majority of the metals showed relatively higher concentrations during winter than summer. Most of the metals exhibited significant spatial variability during both seasons; relatively higher metal levels were found in the old settlements and thickly populated areas of the city. Average concentrations of Pb, Ni, Cd and Co in the groundwater were found to be higher than the national and international guideline values. Factor analysis and cluster analysis revealed major anthropogenic contributions of Ni, Co, Cd, Cu, Cr and Pb in the groundwater while rest of the metals showed mixed and/or natural contributions. Evaluation of human health risks for the metal contents in groundwater revealed that Pb, Co, Ni and Cd were associated with significantly higher non-carcinogenic risks (HQing > 1); the calculated risk for children was considerably higher than the adults. Moreover, the carcinogenic risk associated with Ni, Cr, Cd and Pb exceeded the safe limits. The present study revealed significantly higher anthropic pollutants in the groundwater which imposed considerable risks to human; therefore, it is recommended to implement immediate remedial measures to ensure safe drinking water.  相似文献   

18.
The competitive adsorption and the release of selected heavy metals and their speciation distribution before and after adsorption in the Yellow River sediments are discussed. The adsorption of metals onto sediments increases with increasing pH value and decreases with increasing ionic strength. The competitive coefficient K c and the distribution coefficient K d are obtained to analyze the competitive abilities of selected heavy metals, which are ranked as Pb > Cu >> Zn > Cd. The competition among selected heavy metals becomes more impetuous with increasing ion concentration in water. Speciation analysis was done by an improved analytical procedure involving five steps of sequential extraction. Cu, Pb and Zn were mainly transformed into the carbonate-bound form (50.8–87.7%) in adsorption. Most of (60.7–77.3%) Cd was transformed into the exchangeable form, and the percentage of carbonate-bound Cd was 19.7–30.4%. The release reaction was so quick that the release capacity of selected heavy metals from sediments to aqueous solution reached half of the maximum value only in 30 s. As opposed to adsorption, the release capacities of selected heavy metals were ranked as Cd > Zn >> Cu > Pb. In this study, Cd produces the most severe environmental hazards, because its concentration in the release solution is 85.8 times more than the human health criteria of US EPA.  相似文献   

19.
The adsorption of five toxic metallic cations, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), onto montmorillonite was investigated as a function of pH and ionic strength and a two-site surface complexation model was used to predict the adsorption data. The results showed that in the lower pH range, 3∼6 for Cd, Cu, Ni and Zn, and 3∼4.5 for Pb, the adsorption was greatly affected by ionic strength, while in the higher pH range, the adsorption was not. In the lower pH range, the metallic cations were mainly bound through the formation of outer-sphere surface on the permanently charged basal surface sites (≡X−), while in the higher pH range the adsorption occurred mainly on the variably charged edge sites (≡SOH) through the formation of inner-sphere surface complexes. Acid-base surface constants and metal binding constants for the two sites were optimized using FITEQL. The adsorption affinity of the five metallic cations to the permanently charged sites of montmorillonite was Pb > Cu > Ni ≈ Zn ≈ Cd, while that to the variable charged sites was Pb ? Cu > Zn > Cd > Ni.  相似文献   

20.
In this research, we have worked on the evaluation of heavy metal contamination in the sediments taken from the intertidal zone of Asaluyeh region using Modified Community Bureau of Reference sequential extraction method (mBCR), the simplified bioaccessibility extraction test (SBET), and calculated enrichment factor (EF). Also, potential influencing factors including sediment characteristics that may affect the heavy metals bioavailability and bioaccessibility were investigated. mBCR extraction analysis indicated that among the metals, Mn, Zn, V, Cu, and Cd exhibit relatively higher mobility, while Ti, Pb, Cr, and Ni occur mainly in the residual fractions. Based on the mean values, the bioaccessibility of metals decreased in the order: Mn (50.01%)>Cd (46.26%)>Zn (14.61%)>V (13.97%)>Pb (10.88%)>Ni (9.2%)>Ti (8.43%)>Cr (6.66%)>Cu (6.23%). The obtained results from the principal component analysis (PCA), EF and mBCR extraction showed that most anthropogenic-derived metals with higher solubility are more bioaccessible compared to those of natural origin. Multiple linear regression analysis demonstrated that the main physicochemical variables of the sediment influencing the bioaccessibility of metals include cation exchange capacity (CEC), pH, and particle size fraction.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号