首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 796 毫秒
1.
The Teisseyre-Tornquist Zone that separates the East European Craton from the Palaeozoic Platform forms one of the most fundamental lithospheric boundaries in Europe. Devonian to Cretaceous-Paleogene evolution of the SE segment of this zone was analyzed using high-quality seismic reflection data that provided detailed information regarding entire Palaeozoic and Mesozoic sedimentary cover, with particular focus on problems of Late Carboniferous and Late Cretaceous-Paleogene basin inversion and uplift. Two previously proposed models of development and inversion of the Devonian-Carboniferous Lublin Basin seem to only partly explain configuration of this sedimentary basin. A new model includes Late Devonian-Early Carboniferous reverse faulting within the cratonic area NE from the Kock fault zone, possibly first far-field effect of the Variscan orogeny. This was followed by Late Carboniferous inversion of the Lublin Basin. Inversion tectonics was associated with strike-slip movements along the Ursynów-Kazimierz fault zone, and thrusting along the Kock fault zone possibly triggered by deeper strike-slip movements. Late Carboniferous inversion-related deformations along the NE boundary of the Lublin Basin were associated with some degree of ductile (quasi-diapiric) deformation facilitated by thick series of Silurian shales. During Mesozoic extension and development of the Mid-Polish Trough major fault zones within the Lublin Basin remained mostly inactive, and subsidence centre moved to the SW, towards the Nowe Miasto-Zawichost fault zone and further to the SW into the present-day Holy Cross Mts. area. Late Cretaceous-Paleogene inversion of the Mid-Polish Trough and formation of the Mid-Polish Swell was associated with reactivation of inherited deeper fault zones, and included also some strike-slip faulting. The study area provides well-documented example of the foreland plate within which repeated basin inversion related to compressive/transpressive deformations was triggered by active orogenic processes at the plate margin (i.e. Variscan or Carpathian orogeny) and involved important strike-slip reactivation of crustal scale inherited fault zones belonging to the Teisseyre-Tornquist Zone.  相似文献   

2.
Several selected seismic lines are used to show and compare the modes of Late-Cretaceous–Early Tertiary inversion within the North German and Polish basins. These seismic data illustrate an important difference in the allocation of major zones of basement (thick-skinned) deformation and maximum uplift within both basins. The most important inversion-related uplift of the Polish Basin was localised in its axial part, the Mid-Polish Trough, whereas the basement in the axial part of the North German Basin remained virtually flat. The latter was uplifted along the SW and to a smaller degree the NE margins of the North German Basin, presently defined by the Elbe Fault System and the Grimmen High, respectively. The different location of the basement inversion and uplift within the North German and Polish basins is interpreted to reflect the position of major zones of crustal weakness represented by the WNW-ESE trending Elbe Fault System and by the NW-SE striking Teisseyre-Tornquist Zone, the latter underlying the Mid-Polish Trough. Therefore, the inversion of the Polish and North German basins demonstrates the significance of an inherited basement structure regardless of its relationship to the position of the basin axis. The inversion of the Mid-Polish Trough was connected with the reactivation of normal basement fault zones responsible for its Permo-Mesozoic subsidence. These faults zones, inverted as reverse faults, facilitated the uplift of the Mid-Polish Trough in the order of 1–3 km. In contrast, inversion of the North German Basin rarely re-used structures active during its subsidence. Basement inversion and uplift, in the range of 3–4 km, was focused at the Elbe Fault System which has remained quiescent in the Triassic and Jurassic but reproduced the direction of an earlier Variscan structural grain. In contrast, N-S oriented Mesozoic grabens and troughs in the central part of the North German Basin avoided significant inversion as they were oriented parallel to the direction of the inferred Late Cretaceous–Early Tertiary compression. The comparison of the North German and Polish basins shows that inversion structures can follow an earlier subsidence pattern only under a favourable orientation of the stress field. A thick Zechstein salt layer in the central parts of the North German Basin and the Mid-Polish Trough caused mechanical decoupling between the sub-salt basement and the supra-salt sedimentary cover. Resultant thin-skinned inversion was manifested by the formation of various structures developed entirely in the supra-salt Mesozoic–Cenozoic succession. The Zechstein salt provided a mechanical buffer accommodating compressional stress and responding to the inversion through salt mobilisation and redistribution. Only in parts of the NGB and MPT characterised by either thin or missing Zechstein evaporites, thick-skinned inversion directly controlled inversion-related deformations of the sedimentary cover. Inversion of the Permo-Mesozoic fill within the Mid-Polish Trough was achieved by a regional elevation above uplifted basement blocks. Conversely, in the North German Basin, horizontal stress must have been transferred into the salt cover across the basin from its SW margin towards the basins centre. This must be the case since compressional deformations are concentrated mostly above the salt and no significant inversion-related basement faults are seismically detected apart from the basin margins. This strain decoupling in the interior of the North German Basin was enhanced by the presence of the Elbe Fault System which allowed strain localization in the basin floor due to its orientation perpendicular to the inferred Late Cretaceous–Early Tertiary far-field compression.  相似文献   

3.
Using a 3-D structural model, we performed a basin-scale analysis of the tectonically inverted Mid-Polish Swell, which developed above the NW–SE-oriented Teisseyre-Tornquist Zone. The later separates the Paleozoic West European Platform from the Precambrian East European Craton. The model permits a comparison between the present depths and sedimentary thicknesses of five layers within the Permian–Mesozoic and Cenozoic successions. The inversion of the NW–SE-trending Mid-Polish Trough during the Late Cretaceous–Paleogene resulted in uplift of a central horst, the Mid-Polish Swell, bounded by two lateral troughs. These structural features are induced by squeezing of a weak crust along the Teisseyre-Tornquist Zone. The swell is characterized by an inherited segmentation which is due to NE–SW transversal faults having crustal roots. From NW to SE, we distinguish the Pomeranian, Kujavian, and Ma opolska segments, that are separated by two transversal faults. During the inversion, the Zechstein salt occurring in the Pomeranian and Kujavian segments in the NW acted as decoupling level between the basement and the post-salt cover, leading to disharmonic deformation. Conversely, because no salt occurs in the SE, both basement and cover were jointly deformed. The vertical tectonic uplift at the surface is estimated to amount to 3 km in the Ma opolska segment. The structural inheritance of the basement is expressed by the heterogeneous geometry of the swell and tectonic instability during Mesozoic sedimentation. The reasons for the inheritance are seen in the mosaic-type Paleozoic basement SW of the Teisseyre-Tornquist Zone, contrasting the Precambrian East European Craton which acted as a stable buttress in the NE. The horst and trough geometry of Cenozoic sediments blanketing the Mid-Polish swell reveals the ongoing intracontinental compressional stress in Poland.  相似文献   

4.
Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.  相似文献   

5.
This paper presents a tectonic escape model for the formation of sedimentary basins in the Yangzhou Block of the Lower Yangtze Region, Eastern China. Nine sedimentary basins are identified in which the Pukou Formation of the Upper Cretaceous has been deposited. From south to north, the nine sedimentary basins are named: Wangjing, Qianshan, Wuwei, Nanxuan, Changzhou, Jurong, Nanjing, Quanjiao and Subei basins. They form a wedge-shape fragment (the Yangzhou Block) occupying an area of 100,000 km2 in the Lower Yangtze Region. The two side boundaries of the Yangzhou Block are the strike-slip Tanlu Fault and the strike-slip Quangjiao–Xiangshui Fault on the northwest and the strike-slip Qingyang–Nantong Fault on the southeast. The wide end of the wedge faces the Southern Yellow Sea in the northeast and the narrow end contacts the Dabie Block in the southwest.During the Early Mesozoic, collision between the Yangtze Block and the North China Block resulted in the formation of the Qinling–Dabie Orogenic Belt and caused the Lower Yangtze Region to become a foreland basin with many strike-slip faults. During the Late Mesozoic, wide spread extension in Eastern China and shortening in Qinling/Dabie Shan and in the Huaying Shan region resulted following establishment of an Andean-type arc margin to the east of the Southern Yellow Sea area, when ‘Greater Japan’ collided with Asia. Consequently, the wedge-shaped Yangzhou Block escaped tectonically toward the northeast and formed distinctive geological features in nine sedimentary basins during Pukou time in the Late Cretaceous. These geological features are reflected in basin spatial distributions, basin geometries, sedimentary facies, sediment thicknesses, sedimentary environments, and the petrology of fanglomerates and sandstones. These basins are part of a large population of arc-crestal rifts formed on top of that Andean arc.The proposed tectonic escape model could be useful in petroleum exploration and mining in the region.  相似文献   

6.
Two crust-forming events dominate the Precambrian history of the Western Gneiss Region (WGR) at about 1800–1600 Ma and 1550–1400 Ma. The influence of the Sveconorwegian orogeny (1200–900 Ma) is restricted to the region south of Moldefjord-Romsdalen. A series of anorthosites and related intrusives are present, possibly derived from the now-lost western margin of the Baltic craton that may have been emplaced in the WGR as an allochthonous unit before the Ordovician.The Caledonian development is split into two orogenic phases, the Finnmarkian (Cambrian — Early Ordovician) and the Scandian (Late Ordovician/Early Silurian — Devonian). The lower tectonic units west of the Trondheim Trough may be Finnmarkian nappes ; they were part of the lower plate during the Scandian continental collision. The Blåhö nappe is correlated with dismembered eclogite bodies along the coast. A regional change of nappe transport direction from 090 to 135 marks the initiation of an orogen-parallel sinistral shear component around 425 Ma. The change caused the development of a complex sinistral strike-slip system in the Trondheim region consisting of the Möre-Tröndelag Fault Zone and the Gränse contact. The latter cut the crust underneath the already emplaced Trondheim Nappe Complex, thus triggering the intrusion of the Fongen-Hyllingen igneous complex, and initiating subsidence of the Trondheim Trough, and was subsequently turned from a strike-slip zone into an extensional fault. Minor southward transport of the Trondheim Nappe Complex rejuvenated some thrusts between the Lower and the Middle Allochthon. A seismic reflector underneath the WGR is interpreted to be a blind thrust which subcrops into the Faltungsgraben. During Middle Devonian orogenic collapse, detachment faulting brought higher units, now eroded elsewhere, down to the present outcrop level, such as the Bergen and Dalsfjord nappe and the Old Red basins.  相似文献   

7.
Eastern Anatolia consisting of an amalgamation of fragments of oceanic and continental lithosphere is a current active intercontinental contractional zone that is still being squeezed and shortened between the Arabian and Eurasian plates. This collisional and contractional zone is being accompanied by the tectonic escape of most of the Anatolian plate to the west by major strike-slip faulting on the right-lateral North Anatolian Transform Fault Zone (NATFZ) and left-lateral East Anatolian Transform Fault Zone (EATFZ) which meet at Karlıova forming an east-pointing cusp. The present-day crust in the area between the easternmost part of the Anatolian plate and the Arabian Foreland gets thinner from north (ca 44 km) to south (ca 36 km) relative to its eastern (EAHP) and western sides (central Anatolian region). This thinner crustal area is characterized by shallow CPD (12–16 km), very low Pn velocities (< 7.8 km/s) and high Sn attenuation which indicate partially molten to eroded mantle lid or occurrence of asthenospheric mantle beneath the crust. Northernmost margin of the Arabian Foreland in the south of the Bitlis–Pötürge metamorphic gap area is represented by moderate CPD (16–18 km) relative to its eastern and western sides, and low Pn velocities (8 km/s). We infer from the geophysical data that the lithospheric mantle gets thinner towards the Bitlis–Pötürge metamorphic gap area in the northern margin of the Arabian Foreland which has been most probably caused by mechanical removal of the lithospheric mantle during mantle invasion to the north following the slab breakoff beneath the Bitlis–Pötürge Suture Zone. Mantle flow-driven rapid extrusion and counterclockwise rotation of the Anatolian plate gave rise to stretching and hence crustal thinning in the area between the easternmost part of the Anatolian plate and the Arabian Foreland which is currently dominated by wrench tectonics.  相似文献   

8.
We have carried out seismological observations within the Sea of Marmara (NW Turkey) in order to investigate the seismicity induced after Gölcük–İzmit (Kocaeli) earthquake (Mw 7.4) of August 17, 1999, using ocean bottom seismometers (OBSs). High-resolution hypocenters and focal mechanisms of microearthquakes have been investigated during this Marmara Sea OBS project involving deployment of 10 OBSs within the Çınarcık (eastern Marmara Sea) and Central-Tekirdağ (western Marmara Sea) basins during April–July 2000. Little was known about microearthquake activity and their source mechanisms in the Marmara Sea. We have detected numerous microearthquakes within the main basins of the Sea of Marmara along the imaged strands of the North Anatolian Fault (NAF). We obtained more than 350 well-constrained hypocenters and nine composite focal mechanisms during 70 days of observation. Microseismicity mainly occurred along the Main Marmara Fault (MMF) in the Marmara Sea. There are a few events along the Southern Shelf. Seismic activity along the Main Marmara Fault is quite high, and focal depth distribution was shallower than 20 km along the western part of this fault, and shallower than 15 km along its eastern part. From high-resolution relative relocation studies of some of the microearthquake clusters, we suggest that the western Main Marmara Fault is subvertical and the eastern Main Marmara Fault dips to south at 45°. Composite focal mechanisms show a strike-slip regime on the western Main Marmara Fault and complex faulting (strike-slip and normal faulting) on the eastern Main Marmara Fault.  相似文献   

9.
The SW part of the Baltic Sea between Scania, Rügen, Bornholm and Mön constitutes a complex crustal transition between the Baltic Shield and the accreted Phanerozoic provinces of the West European Platform. An integrated interpretation of marine reflection seismic data sets from the BABEL AC line and two commercial surveys offshore NE Germany and S Sweden have resulted in a complete view of the structural framework in the area. The general seismic picture can best be detected by two characteristic sets of reflection phases. The lower set is dominated by slightly dipping and vertically displaced prominent reflectors corresponding to downfaulted Lower Palaeozoic strata on top of the Precambrian basement. The upper set represents Mesozoic and Cenozoic coherent reflection phases including a thick Upper Cretaceous unit. The Caledonian deformation front is identified in the southern part of the investigated area as the border against which basement rocks have been affected by Caledonian metamorphism and deformation. Major structural elements also include the N–S trending Agricola–Svedala Fault and North Rügen-Skurup Fault. Several NW–SE trending faults are also identified including the Nordadler–Kamien Fault, Jutland–Mön Fault, Carlsberg Fault, Romeleåsen Fault Zone and the Fyledalen Fault Zone. The sedimentary record from NE German offshore wells and Scanian boreholes is compared with the seismic data. The Cambro-Silurian strata are composed mainly of quartzitic sandstones, shales and biomicritic limestones. The Silurian is dominated by grey, micaceous shale and micaceous siltstone deposited in a marginal basin. Upper Palaeozoic strata are merely encountered in the southernmost part of the investigated area. These include Zechstein strata. The Mesozoic deposits are dominated by a thick Cretaceous sequence of mainly limestones with interbedded sandstones.  相似文献   

10.
文章以青藏高原东缘龙门山活动构造的地貌标志为切入点,在汶川-茂汶断裂、北川断裂、彭灌断裂和大邑断裂等主干活动断裂的关键部位,对断错山脊、洪积扇、河流阶地、边坡脊、断层陡坎、河道错断、冲沟侧缘壁位错、拉分盆地、断层偏转、砾石定向带、坡中槽、弃沟和断塞塘等活动构造地貌和断裂带开展了详细的野外地质填图和地貌测量,利用精确的地貌测量数据和测年数据,定量计算了龙门山主干断裂的逆冲速率和走滑速率,结果表明在晚新生代时期龙门山构造带仅具有微弱的构造缩短作用,其中逆冲速率的速度值小于1.1mm/a,走滑速率的速度值小于1.46mm/a,表明走滑分量与逆冲分量的比率介于6 ∶ 1~1.3 ∶ 1之间,以右行走滑作用为主。在此基础上,对各主干活动断裂的逆冲速率和走滑速率进行了定量的对比研究,结果表明自北西向南东4条主干断裂的最大逆冲分量滑动速率具有变小的趋势,而走滑分量的滑动速率则具有逐渐变大的趋势,显示了从龙门山的后山带至前山带主干断裂的走滑作用越来越强。由此推测现今的龙门山及其前缘盆地不完全是由于构造缩短作用形成的,而主要是走滑作用和剥蚀卸载作用的产物。另外,根据沉积、构造、盆地充填体的几何形态、地貌、古地磁等标定和对比了龙门山在中生代和新生代的走滑方向,表明龙门山构造带在中生代与新生代之交走滑方向发生了反转,即由中生代时期的左行变为新生代时期的右行。  相似文献   

11.
Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)   总被引：1，自引：0，他引：1  
Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:
(1) Late Oligocene–Aquitanian to Early Tortonian: σ1 subhorizontal N–S, partly E–W directed, σ3 subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;
(2) Early Tortonian to Pliocene–Pleistocene: σ1 subvertical, σ3 subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;
(3) Pleistocene to Recent: (3a) σ1 subvertical, σ3 subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ1 subhorizontal NW directed, σ3 NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ1 and σ2.
Keywords: Neotectonics; Paleostress; Fault-slip data; Deformation history; Betic Cordilleras  相似文献   

12.
The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.  相似文献   

13.
The NW–SE-striking Northeast German Basin (NEGB) forms part of the Southern Permian Basin and contains up to 8 km of Permian to Cenozoic deposits. During its polyphase evolution, mobilization of the Zechstein salt layer resulted in a complex structural configuration with thin-skinned deformation in the basin and thick-skinned deformation at the basin margins. We investigated the role of salt as a decoupling horizon between its substratum and its cover during the Mesozoic deformation by integration of 3D structural modelling, backstripping and seismic interpretation. Our results suggest that periods of Mesozoic salt movement correlate temporally with changes of the regional stress field structures. Post-depositional salt mobilisation was weakest in the area of highest initial salt thickness and thickest overburden. This also indicates that regional tectonics is responsible for the initiation of salt movements rather than stratigraphic density inversion.Salt movement mainly took place in post-Muschelkalk times. The onset of salt diapirism with the formation of N–S-oriented rim synclines in Late Triassic was synchronous with the development of the NNE–SSW-striking Rheinsberg Trough due to regional E–W extension. In the Middle and Late Jurassic, uplift affected the northern part of the basin and may have induced south-directed gravity gliding in the salt layer. In the southern part, deposition continued in the Early Cretaceous. However, rotation of salt rim synclines axes to NW–SE as well as accelerated rim syncline subsidence near the NW–SE-striking Gardelegen Fault at the southern basin margin indicates a change from E–W extension to a tectonic regime favoring the activation of NW–SE-oriented structural elements. During the Late Cretaceous–Earliest Cenozoic, diapirism was associated with regional N–S compression and progressed further north and west. The Mesozoic interval was folded with the formation of WNW-trending salt-cored anticlines parallel to inversion structures and to differentially uplifted blocks. Late Cretaceous–Early Cenozoic compression caused partial inversion of older rim synclines and reverse reactivation of some Late Triassic to Jurassic normal faults in the salt cover. Subsequent uplift and erosion affected the pre-Cenozoic layers in the entire basin. In the Cenozoic, a last phase of salt tectonic deformation was associated with regional subsidence of the basin. Diapirism of the maturest pre-Cenozoic salt structures continued with some Cenozoic rim synclines overstepping older structures. The difference between the structural wavelength of the tighter folded Mesozoic interval and the wider Cenozoic structures indicates different tectonic regimes in Late Cretaceous and Cenozoic.We suggest that horizontal strain propagation in the brittle salt cover was accommodated by viscous flow in the decoupling salt layer and thus salt motion passively balanced Late Triassic extension as well as parts of Late Cretaceous–Early Tertiary compression.  相似文献   

14.
梁承华  徐先兵  李启铭  桂林  汤帅 《地球科学》2019,44(5):1761-1772
华南中-新生代构造演化受太平洋构造域和特提斯洋构造域的联合控制.以江南东段NE-SW向景德镇-歙县剪切带和球川-萧山断裂中发育的脆性断层为研究对象,利用野外交切关系和断层滑移矢量反演方法厘定了7期构造变形序列并反演了各期古构造应力场,讨论了断层活动的时代及其动力学.白垩纪至新生代研究区7期古构造应力场分别为:(1)早白垩世早期(136～125Ma)NW-SE向伸展;(2)早白垩世晚期(125～107Ma)N-S向挤压和E-W向伸展;(3)早白垩世末期至晚白垩世早期(105～86Ma)NW-SE向伸展;(4)白垩世中期(86～80Ma)NW-SE向挤压和NE-SW向伸展;(5)晚白垩世晚期至始新世末期(80～36Ma)N-S向伸展;(6)始新世末期至渐新世早期(36～30Ma)NE-SW向挤压和NW-SE向伸展;(7)渐新世早期至中新世中期(30～17Ma)NE-SW向伸展.结合区域地质研究表明,第1期至第4期古构造应力场与古太平洋构造域的板片后撤、俯冲以及微块体(菲律宾地块)间的碰撞作用有关;第5期伸展作用受控于新特提斯构造域俯冲板片后撤,而第6期和第7期古构造应力场主要与印-亚碰撞的远程效应有关.白垩纪至新生代,华南东部受伸展构造体制和走滑构造体制的交替控制.先存断裂的发育可能是导致华南晚中生代走滑构造体制的主要控制因素.  相似文献   

15.
The segmented structure of the Karpinsky Ridge is determined by NE-trending transverse strikeslip faults with offsets of approximately 30–40 km. The newly recognized Pribrezhny Fault and the well-known Agrakhan Fault are the largest. A new correlation scheme for structural elements of the ridge’s eastern segment and its underwater continuation is proposed with account of offset along the Pribrezhny Fault. According to this scheme, the Semenovsky Trough rather than the Dzhanai Trough is an onshore continuation of the underwater Zyudevsky Trough. The uplift located south of the Zyudevsky Trough is correlated with the Promyslovy-Tsubuk Swell offset along the Pribrezhny Fault. In turn, this uplift is displaced along the right-lateral strike-slip fault that coincides with the Agrakhan Fault. The transverse faults were formed during the Early Permian collision related to the closure of the basin, which was presumably underlain by the oceanic crust. The faults were active during the Early Triassic rifting and Late Triassic inversion. Judging from the map of the surface of the Maikop sediments, the Agrakhan Fault does not cross the Terek-Caspian Trough. Bending arcwise, the fault joins a system of right-lateral strike-slip faults that border the Daghestan Wedge in the east. A system of rightlateral strike-slip faults may also be traced along the western coast of the Caspian Sea. The Agrakhan Fault as a northern element of this system functioned mostly in the Late Paleozoic-Early Mesozoic in connection with the formation of the fold-thrust structure of the Karpinsky Ridge. In the east the faults of the southern segment bound the Caucasus syntaxis of the Alpine Belt; they have retained their activity to the present day.  相似文献   

16.
The West Junggar Orogenic Belt(WJOB)in northwestern Xinjiang,China,is located in the core of the western part of the Central Asian Orogenic Belt(CAOB).It has suffered two stage tectonic evolutions in Phanerozoic,before and after the ocean–continental conversion in Late Paleozoic.The later on intracontinental deformation,characterized by the development of the NE-trending West Junggar sinistral strike-slip fault system(WJFS)since Late Carboniferous and Early Permian,and the NW-trending Chingiz-Junggar dextral strike-slip fault(CJF)in Mesozoic and Cenozoic,has an important significance for the tectonic evolution of the WJOB and the CAOB.In this paper,we conduct geometric and kinematic analyses of the WJOB,based on field geological survey and structural interpretation of remote sensing image data.Using some piercing points such as truncated plutons and anticlines,an average magnitude of^73 km for the left-lateral strike-slip is calculated for the Darabut Fault,a major fault of the WJFS.Some partial of the displacement should be accommodated by strike-slip fault-related folds developed during the strike-slip faulting.Circular and curved faults,asymmetrical folds,and irregular contribution of ultramafic bodies,implies potential opposite vertical rotation of the Miao’ergou and the Akebasitao batholiths,resulted from the sinistral strike-slipping along the Darabut Fault.Due to conjugate shearing set of the sinistral WJFS and the dextral CJF since Early Mesozoic,superimposed folds formed with N–S convergence in southwestern part of the WJOB.  相似文献   

17.
在滇中香炉山引水隧洞工程区活动断裂部位开展了八个钻孔的水压致裂原地应力测试工作。结果显示工程区应力状态以水平应力为主导,龙蟠-乔后断裂和丽江-剑川断裂部位均为走滑应力状态,鹤庆-洱源断裂西支为走滑应力状态,南段为逆冲应力状态。从应力累积的角度分析,测深范围内三条活动断裂大部分测点实测最大主应力值未超过使断层产生滑动失稳的临界值。地应力测试获得的最大主应力优势方位NNE-NE向与利用该地区震源机制解反演得到的现今构造应力场主压应力方位NEE向存在差异,说明地应力测试结果在一定程度上受到了断层活动性的影响。考虑活动断裂形变和力学属性的多个指标参数,对活动断裂影响程度的Fuzzy-Grey模糊综合评价表明龙蟠-乔后断裂对香炉山隧洞工程的影响较弱,丽江-剑川断裂的影响程度最强,需引起重视。  相似文献   

18.
The NW-SE oriented Sorgenfrei–Tornquist Zone (STZ) has been thoroughly studied during the last 25 years, especially by means of well data and seismic profiles. We present the results of a first brittle tectonic analysis based on about 850 dykes, veins and minor fault-slip data measured in the field in Scania, including paleostress reconstruction. We discuss the relationships between normal and strike-slip faulting in Scania since the Permian extension to the Late Cretaceous–Tertiary structural inversions. Our paleostress determinations reveal six successive or coeval main stress states in the evolution of Scania since the Permian. Two stress states correspond to normal faulting with NE-SW and NW-SE extensions, one stress state is mainly of reverse type with NE-SW compression, and three stress states are strike-slip in type with NNW-SSE, WNW-ESE and NNE-SSW directions of compression.The NE-SW extension partly corresponds to the Late Carboniferous–Permian important extensional period, dated by dykes and fault mineralisations. However extension existed along a similar direction during the Mesozoic. It has been locally observed until within the Danian. A perpendicular NW-SE extension reveals the occurrence of stress permutations. The NNW-SSE strike-slip episode is also expected to belong to the Late Carboniferous–Permian episode and is interpreted in terms of right-lateral wrench faulting along STZ-oriented faults. The inversion process has been characterised by reverse and strike-slip faulting related to the NE-SW compressional stress state.This study highlights the importance of extensional tectonics in northwest Europe since the end of the Palaeozoic until the end of the Cretaceous. The importance and role of wrench faulting in the tectonic evolution of the Sorgenfrei–Tornquist Zone are discussed.  相似文献   

19.
The orientation of the maximum horizontal stress SH is obtained from the analysis of borehole breakouts, covering a depth range from 300 to 3415 m (below sea level) in twelve offshore exploration wells in the northwestern Valencia Trough. The orientation of SH is roughly coincident with the strike of major extensional structures. From N to S it changes counterclockwise from a NE–SW orientation to a N–S orientation. Estimates of the tectonic regimes indicate that the area is characterised predominantly by normal-faulting with a strike-slip component. Both the stress orientations and the tectonic regimes are consistent with neotectonic studies in the nearby Catalan Coastal Ranges. An established method of estimating the tectonic regime by Moos and Zoback (1990) was modified by the inclusion of a nontrivial cohesion, but this changes the results insignificantly.  相似文献   

20.
The distribution of hypocentres in the Upper Rhine Graben area is re-examined, and discussed with respect to the present day tectonic framework. Most earthquakes occur within a N60° striking wedge, located on top of a Moho dome. This wedge is limited by the surface and at depth, by a plane which, in the south of the dome, coincides with the SE dipping Conrad discontinuity. In depth, the seismicity shows a normal distribution the maximums of which are located on a surface dipping 6° towards SE, parallel to the south-eastward dipping Conrad and Moho. This surface outcrops along the north-western edge of the uplifted crystalline Vosges and Black-Forest. The main shocks in earthquake swarms in the region often occur in the vicinity of this surface and along pre-existing N–S to NE–SW Variscan or Tertiary faults and show focal mechanisms of strike-slip. In contrast, part of the aftershocks show focal mechanisms of reverse faulting associated with SE–NW striking compression. The seismic wedge and the north-westward rising seismic surface suggest initiation of crustal ramp, which starts at the south-eastern rim of the Conrad dome and which may become a thrust plane if SE–NW compression continues. In the south-eastern edge of the graben and above the south-eastern ridge of the Moho dome, where evidences for extension have been found, we identify clustering of hypocentres along a surface that strikes N150°, parallel to the main compression and dipping towards NE. Dominant normal faulting mechanisms along this surface suggests initiation of a normal, probably listric fault. At depth, the onset of the future fault plane is located on top of the NW–SE striking ridge of the lower crust and Moho, which act as a an indenter. In addition to thrusting of the whole wedge towards NW, increasing of NW–SE compression would lead to the formation of a half graben at the place of the present Sierentz depression.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号