共查询到20条相似文献，搜索用时 93 毫秒
1.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive. 相似文献
2.
Shen Huishen
Professor 《中国海洋工程》1996,(4)
- posthuckling analysis is presented for the stilTened cylindrical shell of finite length subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, nonlinear large deflections in the postbuckling range and initial geometrical imperfections of the shell. The "smeared stifl'cner" approach is adopted for the stiffencrs. In the analysis a singular perturbation technique is used (o determine the interactive buckling loads and the postbuckling paths. Numerical examples cover the performance of perfect and imperfect, stringer and ring stiffened cylindrical shells. Typical results arc presented in the dimcnsionless graphical form. 相似文献
3.
Wu Lianyuan Hu Gangyi Professor Shanghai Jiaotong University Shanghai Engineer Wuhan Ship Development & Design Institute Wuhan 《中国海洋工程》1994,(2)
-This paper adopts approximate formulas for residual stresses caused by cold bending for plates with stress-strain curve form a = K n. A typical distribution of the longitudinal residual stress due to welding is also assumed. The effects of residual stress due to cold bending and welding on plastic buckling of axially compressed cylindrical shells are studied by the finite element method. 相似文献
4.
The element stiffness matrix of the equivalent beam or pipe element of the deformed leg of the platform is derived by the finite element method. The stresses and displacements of some damaged components are calculated, and the numeri-cal solutions agree well with those obtained by the fine mesh finite element method. Finally, as an application of this method, the stresses of some platform structures are calculated and analyzed. 相似文献
5.
具有裂纹损伤桩腿的海洋石油平台有限元分析 总被引：3，自引：0，他引：3
采用有限元分析方法和断裂力学方法,将含裂纹构件的裂纹以线弹簧处理,建立了带有裂纹损伤桩腿的等效梁和管单元的单元刚度矩阵的计算方法。对检验方法的正确性,使用该方法对几种损伤构件进行了强度计算,并与有限元细化网格计算结果和实验结果进行比较,最后将等效单元计算程序接入大型有限元程序ＳｕｐｅｒＳＡＰ,对受损后的平台整体结构进行了应力计算和强度分析。 相似文献
6.
波浪作用下海床动力反应的数值分析 总被引：2，自引：3，他引：2
近海和离岸建筑物的基通常处于连续不断的小风浪作用之下，可将其变形视为弹性。基于二维广义Biot理论，提出了线性或非线性波浪作用下饱和弹性海床动力应应的时域有限元数值解法。静力平衡条件和Biot方程组成的边值方程可视为其特例，在比较算例中，数值计算得到的孔压和有效应力幅值沿海床深度的分布与解析解十分吻合。土骨架和孔隙流体的加速度对海床动力反应的影响很小。具体算例表明，线性波沿缓坡海床传播时，土层中超静孔压和有效应力幅值随之增大，有可能发生滑动坡坏。所提出的数值解法能够灵活地处理非线性波浪荷载，海底复杂地质条件和波浪沿缓坡传播等复杂情况。 相似文献
7.
After borrowing the idea of precise integration method, a precise integration transfer matrix method (PITMM) is proposed by modifying traditional transfer matrix method. The submarine hull can be modeled as joined conicalcylindrical-spherical shells. By considering the effect of the ring-stiffeners, the field transfer matrixes of shells of revolution are obtained accurately by PITMM. After assembling the field transfer matrixes into an entire matrix, the dynamic model is established to solve the dynamic responses of the joined shell. By describing the sound pressure in fluid by modified wave superposition method (MWSM) and collocating points along the meridian line of the joined shell, finally the structural and acoustic responses of a finite stiffened submarine hull can be predicted by coupled PITMM and MWSM. The effectiveness of the present method has been verified by comparing the structural and acoustic responses of the spherical shell with existing results. Furthermore, the effects of the model truncation, stiffness and thickness on the structural and acoustic responses of the submarine hull are studied. 相似文献
8.
波浪作用下孔隙海床-管线动力相互作用分析 总被引：1，自引：0，他引：1
波浪作用下海床中的孔隙水压力与有效应力是影响海底管线稳定性的主要因素。然而,在目前的海床响应分析中一般将管线假定为刚性,并不能合理地考虑海床与管线之间的相互作用效应,同时也没有考虑土体和管线加速度对海床动力响应的惯性影响,从而无法确定由此所引起的管线内应力。为此考虑管线的柔性,分别采用饱和孔隙介质的Biot动力固结理论和弹性动力学理论列出了海床与管线的控制方程,进而采用摩擦接触理论考虑海床与管线之间的相互作用效应,基于有限元方法建立了海床-管线相互作用的计算模型及其数值算法。通过变动参数对比计算讨论了管线几何尺寸、海床土性参数对波浪所引起的管线周围海床孔隙水压力和管线内应力的影响。 相似文献
9.
1 .IntroductionSphericalshellsandcircularcylindricalshellshavebecomethemajorstructuralformsfornaviga tiondevicesunderwater,suchassubmarine ,torpedo ,andsoon .Theintegratedsphericalshellsareoftenusedascommunicationandtransportationtools,andserveasworkroomsforexternalexaminationandrepairoflargenavigationdevicesunderwatertoo .Especiallyforthesphericaldouble shell,itisveryusefulforthedeepmarineworks .Inthesphericaldouble shell,severalinternalringplatesareusuallydesignedtoconnecttheinnerandoutersph… 相似文献
10.
环肋圆柱壳体在水下冲击波作用下的动力弹塑性屈曲 总被引：1，自引：0，他引：1
本文以加肋圆柱壳体为对象建立力学模型，在水下爆炸产生的冲击波作用下，考虑流体与结构的耦合效应，研究加肋圆柱壳体的弹塑性失稳变形量及动力响应特性。数值分析显示出的最终变形形状和压力变化过程与实验资料一致的 相似文献
11.
为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。 相似文献
12.
The coupling between a coaxial array of six ferroelectric shells and its fluid environment is computed by an application of N-port theory. Properties of the lowest ("breathing") mode of the shells are determined by using three-dimensional finite elements, and this knowledge is utilized in defining an N-port representation of the array. An N-port representation of the external fluid is obtained by solving the Helmholtz integral equation that relates fluid velocities and pressure on the exterior of the array. The two N-ports are coupled together in a standard circuit-theoretic manner to produce an equation for the electrical driving-point impedance of the loaded projector. Several frequency responses, which illustrate the effects of varying certain parameters are presented. 相似文献
13.
Initial stage of incompressible liquid impact onto a corrugated elastic panel with account for compressible gas trapping between the corrugations is studied. The liquid free surface is flat and parallel to the panel before impact. The impact velocity is constant in this study. The corrugations are modelled as identical rigid short structures on the surface of the flat panel. The panel is either of infinite or finite length. There are only two corrugations which are placed symmetrically on the panel. Only a part of the panel between these two corrugations is elastic. The liquid free surface closes the gas cavity between the two corrugations at the initial instant of impact and compresses the gas before the fluid comes in contact with the elastic part of the panel. The elastic deflections of the panel are caused by gas pressure in the cavity. The elastic deflections modify both the pressure in the cavity and the hydrodynamic pressure distribution along the wetted part of the panel. The hydroelastic problem is solved within the Wagner approach. The effect of gas compressibility on the elastic behaviour of the corrugated elastic panel is investigated. It is shown that the pressure in the gas cavity and elastic deflections grow beyond all bounds for the panel of infinite length and are finite if the panel is of finite length. The present model is relevant for the strength assessment of the cargo containment system (CCS) in the tanks of LNG carriers. 相似文献
14.
Alexander Korobkin 《Ocean Engineering》1998,25(8):687-714
The impact of an elastic plate onto the compressible fluid without free surface deformation is considered. The ability of the liquid volume to be deformed is geometrically limited which leads to severe impact conditions. The present analysis is focused on the stresses in the plate and the hydrodynamic loads under the impact. The motivation for this research comes from ship hydrodynamics, where the hulls of a catamaran restrict the liquid outflow and the water impacts onto the wetdeck. The influence of the air on the impact process is investigated. The analysis did not reveal any great advantage of utilizing the air-cushion effect or ejection of air into the water near the impact region to prevent high stresses in the elastic plate. It was found that in the problem considered, the stress peaks far from the plate centre and the one-mode approximation does not provide correct information about the stress level. 相似文献
15.
16.
Static analysis of stiffened shells has been carried out using an eight-noded isoparametric element for the shell and a three-noded curved beam element for the stiffener. A same displacement function is used for the shell and the stiffener elements. A modified technique has been followed to analyse the shell, which is an improvement over the degenerated shell concept. The stiffness matrix of the curved beam element is generated irrespective of its position and orientation within the shell element. The stiffness matrix of the stiffener is then transferred to all the nodes of the shell element. Numerical examples of stiffened shells with concentric and eccentric stiffeners have been analysed and the results presented together with those available in published literature. 相似文献
17.
采用弹性基础梁模型,模拟钢悬链线立管(steel catenary riser,SCR)与海床土的相互作用,推导了弹性基础梁模型的有限元公式,基于该模型编制了钢悬链式立管的动力分析程序,在此基础上,分析了在浮体运动及环境载荷作用下,钢悬链线立管触地点区域的动力响应特征,并与弹簧支撑模型进行了比较。研究表明,弹性基础梁模型对单元长度的敏感性较低,可采用较长的单元,从而减少计算量。 相似文献
18.
Estimation of Land Subsidence Based on Groundwater Flow Model 总被引：8，自引：0，他引：8
This article presents an approach for estimating land subsidence due to withdrawal of groundwater. The proposed method calculates the groundwater seepage in 3-D-condition and calculates the land subsidence one-dimensionally. The governing equation on groundwater seepage is based on the three-dimensional mass conservation law and the principle of effective stress. The land subsidence calculation method is derived based on the following assumptions: (1) displacements occur only in the vertical direction, and (2) in vertical direction the total stresses do not change. The governing equation is solved by numerical method, i.e., finite element method (FEM) in spatial discretization and finite difference method (FDM) in time series discretization. In FEM Galerkin method is adopted and in FDM, lumped matrix method is employed. The proposed method is calibrated via analyzing 1-D consolidation problem and the results are compared with those from Terzaghi's one-dimensional consolidation theory and oedometer test. The proposed method is employed to analyze the consolidation of a soft layer due to withdrawal of groundwater from an aquifer under it. Moreover, this method is also applied to a field case of land subsidence due to groundwater pumping in a gas production field in Japan. The analytical results are compared with the field observed data. The results show that this approach simulates the field case well. 相似文献
19.
This article presents an approach for estimating land subsidence due to withdrawal of groundwater. The proposed method calculates the groundwater seepage in 3-D-condition and calculates the land subsidence one-dimensionally. The governing equation on groundwater seepage is based on the three-dimensional mass conservation law and the principle of effective stress. The land subsidence calculation method is derived based on the following assumptions: (1) displacements occur only in the vertical direction, and (2) in vertical direction the total stresses do not change. The governing equation is solved by numerical method, i.e., finite element method (FEM) in spatial discretization and finite difference method (FDM) in time series discretization. In FEM Galerkin method is adopted and in FDM, lumped matrix method is employed. The proposed method is calibrated via analyzing 1-D consolidation problem and the results are compared with those from Terzaghi's one-dimensional consolidation theory and oedometer test. The proposed method is employed to analyze the consolidation of a soft layer due to withdrawal of groundwater from an aquifer under it. Moreover, this method is also applied to a field case of land subsidence due to groundwater pumping in a gas production field in Japan. The analytical results are compared with the field observed data. The results show that this approach simulates the field case well. 相似文献
20.
C. T. F. Ross Bak Hock Huat Tay Boon Chei Chai Min Chong M. D. A. Mackney 《Ocean Engineering》2003,30(5):691-705
The paper reports on a theoretical and an experimental investigation into six GRP hemi-ellipsoidal dome shells, which were tested to destruction under external hydrostatic pressure. All six domes were of oblate shape and of three different aspect ratios. Each aspect ratio consisted of two dome shells, one made from two layers of glass fibre and one made from three layers of glass fibre. The theoretical analysis was via the finite element method where a non-linear theory was used which allowed for both geometrical and material non-linearity. Comparison between theory and experiment was good. 相似文献