共查询到20条相似文献，搜索用时 31 毫秒
1.
The groutability depends on the properties of the grout, its injection processes, and on the mechanical properties of the soil formation. During the process of pouring cement‐based grouting into a porous medium, a variation with time occurs in the viscosity of grout suspension. In addition, the particle filtration phenomenon will limit the expansion of the grouted zone because cement particles are progressively stagnant within the soil matrix. In this paper, a closed‐form solution was derived by implementing the mass balance equations and the generalized phenomenological filtration law, which can be used to evaluate the deposition of cement‐based grout in the soil matrix. The closed‐form solution relevant to a particular spherical flow was modified by a step‐wise numerical calculation, considering the variable viscosity caused by a chemical reaction, and the decrease in porosity resulting from grout particle deposition in the soil pores. A series of pilot‐scale chamber injection tests was performed to verify that the developed step‐wise numerical calculation is able to evaluate the injectable volume of grout and the deposition of grout particles. The results of the chamber injection tests concurred well with that of the step‐wise numerical calculation. Based on the filtration phenomenon, a viable approach for estimating the groutability of cement‐based grout in a porous medium was also suggested, which might facilitate a new insight in the design of the grouting process. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
2.
Fluid flow during permeation grouting of fine sands with a microcement-based grout is studied by assuming that the heterogeneous medium composed of the initial granular skeleton, filtered cement and the interstitial fluid phase can be replaced by a continuous equivalent medium at the macroscopic level. Consequently, the method of Homogenization of Periodic Structures (HPS) is used to identify the effective permeability tensor evolution under the effect of cement filtration. The expression of the macroscopic permeability tensor derived through the HPS procedure is shown to depend on the permeating fluid viscosity and the geometrical arrangement of the sand grains and cement deposit within the microstructure. Numerical computations are made using various two-dimensional and three-dimensional microstructures, and the model results are confronted with grouting experiments performed on small scale columns in the laboratory. 相似文献
3.
4.
The development of a predictive model of behaviour of porous media during injection of miscible grout, taking into account convection, dilution and filtration of grout solution with interstitial water, as well as consolidation aspects, is presented. Model assumptions are reviewed and discussed first. During the establishment of the model, we insist on surface terms and their physical relevance in expressing adsorption effects. Constitutive laws such as Fick's law for diffusive mass transport, hydrodynamic dispersion tensor dealing with miscibility, are modified by taking into account filtration effects. A new surface term appears in mass balance equations as a consequence of filtration. According to the filtration laws used, an initial filtration rate is estimated on the basis of a one‐dimensional experimental campaign. The field equations are discretized by using Galerkin finite element and θ‐scheme standard method. For transport equation, Streamline Upwind Petrov Galerkin method is employed to prevent numerical oscillations. Lastly, confrontation of numerical results with laboratory experiments constitutes a first step to validate the model on a realistic basis. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
5.
A model was developed, to describe miscible grout propagation in a saturated deformable porous medium, based on Bear's statistical model with spatial volume averaging. In a previous paper, the model was first successfully confronted to one‐dimensional laboratory experiments. In the present paper, the numerical model is used to simulate practical grouting operation in a cylindrical injection model. The cylindrical injection model lends itself to study main flow and propagation character istics for a dispersed suspension‐type grout, under axisymmetric conditions close to real scale conditions. Comparison between numerical solutions and experimental results is essential to confirm the validity and accuracy of the proposed model from a phenomenological standpoint. The numerical model performances show that the underlying mathematical model constitutes a realistic predictive model reproducing most prominent features during injection of a suspension‐type grout into a deformable porous medium. The basic mechanism by which injected miscible grout permeates a soil mass is discussed in detail. Such a tool leads to quality control criteria for grouting on a theoretical basis, which complements existing criteria acquired through engineering practice. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
6.
帷幕灌浆扩散半径及数值模拟的研究 总被引：2，自引：0，他引：2
从连续性方程出发,考虑浆液压力对土体孔隙率的影响,分析推导了浆液在多孔介质中的渗流规律,并给出了扩散半径的简单近似计算公式;然后将二相流理论应用到注浆研究中,假设孔隙由水和浆液完全充填,且二者不相混溶,建立了浆液驱水的非稳定渗流模型。根据某大坝的实际情况,用FLAC软件中的二相流模块对大坝灌浆过程进行了模拟分析,并与推导公式相比较。由于二相流理论考虑了毛细压力的作用,模拟得到的浆液扩散速率递减得更快。模拟结果表明,浆液和水之间存在着一个过渡带,浆液的饱和度在不同时间和位置上是变化的。随着时间的延长,浆液扩散得越远,但其速率逐渐减小。扩散半径不仅与渗透系数有关,还与孔隙度有关,而且孔隙度较渗透系数对扩散半径有着更大的影响。二相流理论可以更好地模拟帷幕灌浆的浆液扩散情况。 相似文献
7.
岩溶突水治理浆材的试验研究 总被引：3，自引：1，他引：2
以深部地下工程的加固和高压突水治理为研究对象,对一种新型化学注浆材料的化学反应封堵机制进行了可行性分析,并针对化学浆液的流动性、渗透性、抗冲刷性以及固结体的强度、水质毒理等因素进行了室内试验研究,详细地分析了浆液的物理化学特征,给出了浆液最佳配比值以及相应的性能指标。结合高压突水工程实例,开展现场注浆封堵试验,检验浆材用于突水封堵治理的可行性,并与超细水泥、水泥-水玻璃、尿醛树脂等常见注浆材料的封堵效果进行对比。试验结果表明：该化学浆液具有反应块、强度高、抗冲刷性强、无毒以及良好的渗透性和遇水膨胀功能,在现场应用中表现出良好的可控性和可泵性以及理想的注浆效果,与水泥类和一些常用化学浆材相比,具有运输快捷、配料方便、工艺简单的优点,所得结论对后续研究具有重要借鉴意义。 相似文献
8.
Summary Currently under study by the Department of Energy are the geologic and hydrologic characteristics of the ash-flow deposits under Yucca mountain at the Nevada test site. Of interest at this site is the potential for disposal of high-level radioactive wastes in the unsaturated zone of the densely welded portions of the tuffs. These studies include the preformance-assessment of barriers and seals for boreholes, ramps, drifts and shafts at the Yucca mountain site. In-situ tests on standard Type II Portland cement and microfine cement as grout materials have been performed on a similar rock type to Yucca Mountain's near Superior Arizona. The tests were performed in a vertical borehole drilled in highly fractured and densely welded tuff (brown unit of Apache Leap) through a series of pressurized grout applications. Packer flow tests prior to and after each grout application measure the effectiveness of the grout application in reducing the permeability of the rock surrounding the borehole. Overall the grout applications have reduced the permeability of the test hole by three orders of magnitude. 相似文献
9.
浆液在多孔介质中的扩散路径对渗透扩散范围和注浆效果具有非常重要的影响。采用理论分析,以分形特征与宾汉姆流体在多孔介质中的渗流运动方程为基础,揭示了考虑扩散路径的宾汉姆流体渗透注浆机制,并利用团队前期开展的渗透注浆试验对其进行了验证。分析了多孔介质孔隙率、宾汉姆水泥浆液水灰比、多孔介质渗透系数、注浆压力、地下水压力等对扩散半径的影响变化规律。同时,基于Comsol Multiphysics平台,采用计算机编程技术二次开发得到了考虑扩散路径的宾汉姆流体渗透注浆机制的渗透注浆三维数值模拟程序,并以此开展了宾汉姆水泥浆液在多孔介质中渗透扩散形态效果的数值模拟。研究结果表明：与不考虑扩散路径的宾汉姆流体渗透注浆球形扩散公式获得的扩散半径理论计算值相比,采用考虑扩散路径的宾汉姆流体渗透注浆机制得到的扩散半径理论计算值更接近试验值。该研究成果可为实践注浆工程提供一定的理论支撑。 相似文献
10.
This article presents a model of flow and transport with filtration in porous media which is used to analyze large-scale grouting tests. A program based on the finite element method is developed to solve the model equations; a particular attention is paid to inherent issues of transport problems. The analysis of these tests aims at providing insights on the propagation patterns associated to the injection of cement-based grouts in sand. To apprehend particular features that characterize field injections, the experiments are performed by using a tube-a-manchette and a patented grout. Finally, the role of filtration during the tests is discussed. 相似文献
11.
12.
深层渗滤效应普遍存在于多孔介质的渗透注浆过程中,并起着非常重要的作用。基于质量守恒方程、线性滤过定律、渗流连续性方程及Darcy定律,建立了水泥浆三维锋面的理论模型;通过现场试验,研究了水泥浆三维锋面扩散运移及沉积层渗透系数的变化规律,并将试验值与模型理论值进行了对比分析。结果表明,沉积层渗透系数随水泥浆锋面的扩散运移动态变化;当注浆压力恒定时,水灰比越小,深层渗滤效应越显著,浆液扩散距离相应越短;相同扩散距离时,受重力效应的影响,注浆点源之上的沉积层渗透系数大于注浆点源之下的沉积层渗透系数;浆液扩散距离及固定位置处的沉积层渗透系数均与水灰比呈正相关。研究成果可指导工程设计,具有一定的实际应用价值。 相似文献
13.
考虑黏度时变性的水泥浆液盾构壁后注浆扩散规律及管片压力模型的试验研究 总被引：3，自引：0，他引：3
对水泥浆液黏度时变性进行了试验研究,证实了工程常用水灰比范围内水泥浆液服从宾汉姆流体特性;不同水灰比浆液黏度均随注浆时间增大而大幅度增加。根据试验结果,考虑注浆过程中水泥浆液黏度随时间的变化,对盾构壁后注浆水泥浆液的扩散规律及因注浆而造成的管片压力进行了推导及分析。计算表明：相同注浆时间条件下,水泥浆液扩散半径及注浆对管片产生的压力值均随注浆压力的增大而增大。考虑浆液黏度时变性后,扩散半径、注浆对管片压力值等均较不考虑浆液时变性时减小,且随注浆压力的增大,浆液黏度变化对管片压力值的影响更加明显。相同注浆压力条件下,浆液扩散半径及对管片产生的压力值均随注浆时间的增长而增加,但注浆前期增长速度较快,而后逐渐减缓。研究成果对于盾构壁后注浆工艺选择及参数设计具有较大的指导意义。 相似文献
14.
Comparison of Permeability and Groutability of Ostur Dam Site Rock Mass for Grout Curtain Design 总被引：3，自引：1，他引：2
The focus of this study is the empirical hydromechanical behaviour of the Ostur dam site rock mass. The area surrounding the dam mostly consists of diorite and andesite, with primary fractures and hydrothermal veins. The hydromechanical behaviour of the rocks was determined using 500 water pressure tests at 5-m intervals. The hydrothermal veins and 2,739 discontinuities were studied and mapped along the dam axis. As a result, it was possible to design an optimum grout curtain for the dam axis. The empirical hydromechanical behaviour of the rock was studied to determine water flow and grout pressurised flow during the field tests that were conducted on two representative A-series grouting operation boreholes (one borehole for each abutment). The secondary permeability index (SPI), Lugeon value (LU), rock quality designation (RQD) and cement take (CT) values are presented and compared in this article. It is concluded that permeability and groutability are mostly controlled by the specifications and characteristics of the veins, especially in shallow areas and lower depths. A procedure is proposed based on a comparison of the trends in the RQD–SPI and LU–CT, and it is suggested that the areas with diverging trends require no treatment and that those with converging trends require heavy treatment. Additional complementary studies that were conducted during the construction stage have validated these results. 相似文献
15.
16.
《Geomechanics and Geoengineering》2013,8(4):259-273
An important design parameter in cement-grouted soil nailed structures is the shear strength at the interface between the grouted nail and the surrounding soil. Both field and laboratory pull-out tests are normally used to investigate this interface shear strength. However, these tests have some limitations. In this study, direct shear box tests are adopted to investigate the interface shear strength behaviour between a completely decomposed granite (CDG) soil and a cement grout plate. Tests were carried out in a large direct shear test apparatus over a range of constant normal stress, soil moisture content, and soil–cement grout interface surface waviness. The laboratory test procedures are briefly described and the main test results are presented, followed by a discussion of the shear behaviour of the soil–cement grout interface. The interface shear behaviour is compared with the shear strength behaviour of the same soil tested under comparable conditions. It is shown that the shear stress–displacement behaviour of the soil–cement grout interface is similar to that of the soil alone. The test results indicate that the interface shear strength of the CDG and cement grout material depends on the normal stress level, the soil moisture content, and the interface surface waviness. 相似文献
17.
针对隧道突水灾害防治对注浆材料的特殊要求,在水泥浆中加入外掺剂改善其力学特性与抗冲刷特性。通过测试不同水灰比、纤维掺量、硅灰掺量下水泥石的抗压与抗折强度,得出各水灰比下的强度最佳配合比,并测试最佳配合比下浆液的流动性与抗冲刷特性。试验发现,纤维与硅灰的掺入能够显著提高水泥石的强度,且对浆液的流动度影响不大;低流速下纤维硅灰水泥浆的抗冲刷特性较纯水泥浆改善显著,但流速较高时其抗冲刷特性仍较差。基于此,在纤维硅灰水泥浆中再掺入可再分散性乳胶粉进一步改善浆液抗冲刷特性。试验结果表明,可再分散性乳胶粉能明显改善浆液抗冲刷特性,即使在较高流速（0.6 m/s）下,其浆液留存率仍达到60%以上。研究结果为隧道突水灾害防治与动水注浆浆液选择提供了参考。 相似文献
18.
注浆法是采煤沉陷区的主要治理方法，浆材对注浆效果和成本影响很大。以陕北地区黄土-水泥-添加剂混合浆液为研究对象，采用单因素及正交试验对黄土浆液的黏度、凝胶时间、结石率及28 d单轴无侧限抗压强度进行试验研究，对各指标的影响因素及变化规律进行分析，同时，建立黄土基浆液的GA-BPNN预测模型，通过GA多目标全局寻优，优选出一定强度下成本最低的浆液配比。试验结果表明:黄土水泥浆液与陕北地区普遍采用的水泥粉煤灰浆液性能相近，成本大幅降低，黄土基注浆材料密度及结石率受水固比影响最为明显，黏度主要受水固比及黄土（水泥）掺量影响，28 d强度主要受黄土（水泥）掺量影响；采用GA-BPNN构建模型预测的黄土基注浆材料性能预测值与期望值相对误差为0.74%~1.83%，预测结果精度高，可满足实际应用需求。移动阅读 相似文献
19.
Grouting of water-conducting fractures with low-alkali cement is foreseen for the potential future repository for spent nuclear fuel in Finland (ONKALO). A possible consequence of the interaction between groundwater and grout is the formation of high-pH solutions which will be able to react with the host rock (gneisses) and alter its mineralogy and porosity. A reactive transport modeling study of this possible alteration has been conducted. First, the hydration of the low-alkali cementitious grout has been modeled, using results from the literature as a guide. The hydrated cement is characterized by the absence of portlandite and the presence of a C-S-H gel with a Ca/Si ratio about 0.8 after tens of years (Ca/Si is about 1.7 in Ordinary Portland Cement). Second, calculations have simulated the interaction between flowing water and grout and the formation of an alkalinity plume, which flows beyond the grouted section of the fracture. The calculations include the hydration and simultaneous leaching of the grout through diffusive exchange between the porewater in the grout and the flowing water in the fracture. The formation of an alkaline plume is extremely limited when the low-pH grout is used. Even when using a grout with a lower silica fume content, the extent and magnitude of the alkaline plume is quite minor. These results are in qualitative agreement with monitoring at ONKALO. 相似文献
20.
选取宁东地区典型的孔隙砂岩,采用不同颜色示踪的化学浆液进行4次注浆试验;揭示了浆液在孔隙中的扩散、充填规律及注浆次数与被注岩层渗透系数、孔隙率之间的关系。研究发现：每次化学注浆浆液的充填情况有明显的差别,首次注浆浆液在整个岩样均有较均匀的充填,后续的各次注浆浆液均呈现部分区域积聚充填的现象;随着注浆次数的增加岩样的渗透系数减小,孔隙充填率增加,渗透系数、孔隙充填率与注浆次数的关系可分别采用幂函数及对数函数拟合;4次注浆后岩样的渗透系数减小了97%,说明多次注浆起到了很好的减渗效果。依据试验成果,建立数值计算模型,预测了不同注浆次数、不同开挖条件下注浆孔及井筒的涌水量,并与井筒实际涌水量进行对比,发现两者数据较为吻合,说明依据试验结果建立数值模型进行涌水量预测是可行的。 相似文献