首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

2.
It is often necessary to locate the original quarry which supplied the stone for a particular historical building. This stones could be used for future restoration work and for testing in the laboratory (artificial aging tests, physical properties determination, control of the efficacy of conservation treatments, etc.). Generally, reviewing historical documentation gives information about the geographical setting of quarries and location of the stones in the monument, but this information needs to be proved by field and laboratory studies. The comparative study of stone from quarries and monuments should basically include the following: (1) mineralogical and petrographical studies; (2) the chemical analysis of major, minor and trace elements; (3)stable isotopes determinations; (4) physical properties of quarry materials and unweathered building stone (water absorption, ultrasound transmission velocity, porosity and porous system, density, bulk density, compressive strength, etc.). This methodology was applied to Málaga Cathedral stones represented in the main façade, towers, and the western zone of the terrace, which, according to historical literature, came from Almayate (Miocene–Pliocene limestones) and Cerro Coronado (Permotriassic sandstone) in Málaga. The conclusion of the comparative study carried out on quarries and building stones was consistent with the information available from the historical documentation.  相似文献   

3.
Enthalpies of dissolution in HF solutions have been measured at 323 K for a series of hydrous trachyte glasses. Enthalpies of mixing between water and molten trachyte have then been calculated from heat capacity data for the same set of samples and available enthalpy for pure water. The moderately negative enthalpies of mixing suggested at 1 bar by the measurements made on glasses almost disappear when trachyte liquids and water are referred to the same temperature, and particularly so when enthalpies of mixing are calculated for a few kbars pressure. As found for albite and phonolite liquids, trachyte melts thus appear to mix nearly ideally as far as enthalpy is concerned. These results imply that the enthalpy of exsolution of water from magmas is very small or negligible under the P-T-X conditions relevant to trachytic volcanism, even for complete degassing of up to 5 wt% H2O. Furthermore, the viscosity increase associated with exsolution-driven cooling is negligible compared to the decrease caused directly by water exsolution.  相似文献   

4.
Iraq is planning to expand and rehabilitate its current railway network, thus demanding huge amounts of proper ballast material. There are three common quarries in Iraq, Sinjaar in the northern sector, Al-Qaim in western desert and Najaf-sea in the middle and southern parts of Iraq. The selection of proper track ballast material is of prime importance in design and construction of railway projects. The single particle-crushing test is a simple indirect tensile test that provides useful data for the selection of the material. Two types of railway ballast materials from (Najaf-sea and Al-Qaim) quarries are commonly used in the construction of railway in Iraq. The single particle-crushing test was performed for various ballast sizes, and the obtained data were analyzed using Weibull analysis. Najaf-sea crushed stones indicate higher tensile strength for all particle sizes compared to corresponding particle sizes of Al-Qaim crushed stone. In addition, an inverse linear relationship had obtained, between tensile strength and particle size with R 2 (0.837 and 0.979) for Al-Qaim and Najaf-sea crushed stone, respectively, such relationships are important in evaluating the suitability of the materials in terms of the survival probability  相似文献   

5.
Optimized extraction of dimension stone blocks   总被引：1，自引：1，他引：0  
The profitable production of dimension stone mainly depends on the extractable block size. The regularity and volume of the blocks are of critical importance, and are controlled by the three-dimensional pattern of the discontinuity system. Therefore, optimization of block size has to be the aim when quarrying for natural stone. This is mainly connected to the quantification of joints and fractures, i.e., their spacing and orientation. The problem of finding unfractured blocks within arbitrarily oriented and distributed planes can be solved effectively by a numerical algorithm. The main effects of joint orientations on block sizes and shapes will be presented in this article. Quantification of unfractured blocks with the aim of optimization is illustrated by detailed studies on several quarries. The algorithm used in this study can be applied as a powerful tool in the planning of a quarry and the future exploitation of dimension stone. Application of the described approach is demonstrated on practical examples of quarrying natural stones, namely, sandstone, granite, rhyolite, etc. Block quarrying can be optimized by using the new 3D-BlockExpert approach. The quantification of unfractured rock masses is also shown to contribute to a more ecological protection and the sustainable use of natural resources.  相似文献   

6.
Owing to its long building history, different types of building stones comprised the construction of the Cologne Cathedral. Severe damage is observed on the different stones, e.g., sandstones, carbonate, and volcanic rocks, especially when the different stone materials neighbor the medieval “Drachenfels trachyte” from the “Siebengebirge”. The question arises, “Is the insufficient compatibility of the implemented building materials causatively related to the strong decay of the Drachenfels trachyte?” The present investigations focus on the petrography and mineralogical composition of eight different stones from the Cologne Cathedral. Petrophysical data, i.e., phase content, moisture and thermal characteristics as well as strength properties are determined and discussed in correlation to each other, showing that not only in terms of lithology great differences exist, but also the petrophysical properties strongly diverge. The ascertained parameters are discussed in view of the deterioration behavior and decay mechanisms of the different stones. To evaluate the compatibility of original, replacement and modern building materials, the properties of the investigated stones are compared to those of Drachenfels trachyte by means of constraints given in the literature. Besides optical properties, petrophysical criteria are also defined as well as strength values. It could be shown that primarily moisture properties, i.e., capillary and sorptive water uptake, water saturation, drying processes and moisture dilatation can be addressed to the deterioration processes.  相似文献   

7.
This paper deals with the scientific assessment of the physical properties of sandstone used in the conservation of Sydney's historic heritage sandstone buildings. The local Hawkesbury Sandstone has been widely used for all manner of constructions since the early days of the first settlement. In the nineteenth century, dimension sandstone quarries existed all over the Sydney region, and the demand for the stone was great. During this time, a true ‘freestone’ known as ‘yellow block’ sandstone, in which bedding planes were absent, was quarried extensively. This sandstone is also known as a ‘self-colouring’ sandstone, where the rock, although grey when quarried, turns a yellow–brown after a few months exposure to the atmosphere. It can be easily carved and was eminently suitable for the ornate Victorian architecture of the time. There are very few quarries within the Sydney region today capable of producing ‘yellow block’ sandstone. Whenever possible, sandstone from suitable building excavations, particularly on the Pyrmont Peninsula, is used for this work. Conservation work is extremely expensive and the building elements that most need replacement, the overhanging and decorative elements, are usually those that cost the most. It is essential that the most durable replacement stone be selected. Thus, a strict regime of scientific testing is used for any major conservation project, in order to determine the physical properties of possible replacement stone. This is the province of the geologist and involves visual observation in the quarry or excavation, which is a simple, cost-effective means of weeding out poor quality stones, followed by laboratory engineering tests to establish the physical parameters of a sandstone and finally, petrographic analysis. The results of such tests, combined with careful sampling, ensure the best possible quality of replacement material.  相似文献   

8.
Dimensional stones with a black color occupy a prominent place on the international market. Uruguayan dolerite dikes of andesitic and andesitic–basaltic composition are mined for commercial blocks of black dimensional stones. A total of 16 dikes of both compositions were studied and samples collected for geochemical and petrographical analysis. Color measurements were performed on different black dimensional stones in order to compare them with the Uruguayan dolerites. Samples of the two commercial varieties (Absolute Black and Moderate Black) were obtained for petrophysical analysis (e.g. density, porosity, uniaxial compressive strength, tensile strength, etc.). Detailed structural analyses were performed in several quarries. Geochemistry and petrography determines the intensity of the black color. The Uruguayan dolerite Absolute Black is the darkest black dimensional stone analyzed in this study. The petrophysical properties of Uruguayan dolerites make them one of the highest quality black dimensional stones. Structural analyses show that five joint sets have been recognized: two sub-vertical joints, one horizontal and two diagonal. These joint sets are one of the most important factors that control the deposits, since they control the block size distribution and the amount of waste material.  相似文献   

9.
Cutting performance of diamond wire saw is a key factor influencing mine planning, production scheduling, and equipment selection for dimension stone quarries. It is normally measured in terms of cutting rate. Rock samples collected from various granite and marble quarries in India were tested in laboratory to determine their physico-mechanical properties. Cutting rate of diamond wire saw was measured in the field studies during the actual cutting process in quarries. Using these laboratory determined properties and the cutting rate, a multiple linear regression model has been developed to predict the cutting rate of diamond wire saw. Physico-mechanical properties of rocks determined in laboratory are used as independent variables and cutting rate as predictor variable in the regression model. The study indicates that the cutting rate increases with a decrease in most of the hardness and strength parameters of rock. The final model is tested for its goodness of fit indicating a significant linear relation between cutting rate and physico-mechanical properties, namely tensile strength, slake durability index, and Cerchar hardness index with regression coefficient of 94%. The resulting model can be used suitably for different types of hard to medium hard and soft dimension stones. The generalized model for estimating the cutting rate becomes a handy tool for mining engineers to work out operating efficiency, expenses, planning etc. of the dimension stone block cutting.  相似文献   

10.
The Euganean thermal basin, located in the Eastern Po plain (Italy), is one of the most important thermal districts of Italy (Euganean–Berician Thermal District). The presence of hot water in the basin has brought about its exploitation over time. The thermal area has been known since the Roman Empire and is still of crucial interest for the profitable use of its hydro-geological resources. For these reasons the water cycle of the thermal area has been thoroughly studied, in particular with regard to its chemical and hydrogeological properties. The effects of well pumping, such as subsidence and water temperature steadiness, have been monitored over time. In the present work, the Horizontal to Vertical Spectral Ratio (HVSR) single station microtremor technique was applied as a non-invasive geophysical tool for the characterization of a part of the Euganean–Berician thermal district involving the municipalities of Abano and Montegrotto towns. This study represents the first correlation between the results from microtremor geophysical surveys and the thermal basin geological structure, including remote sensing data and thermal well information. More than 50 HVSR measurements from single stations were collected and analysed, in close correlation with the vast amount of available borehole logs, well exploitation data and SAR interferometry measurements collected for the monitoring of land subsidence induced by thermal water pumping. The aim of the work was to evaluate the suitability of the microtremor technique for the preliminary characterization of a thermal basin, in terms of resonance properties of the alluvial deposits covering the rocky bedrock, evaluated by means of HVSR methods. HVSR results were interpreted in terms of regional geological setting and hydrogeological properties of the subsoil. Our field results confirmed the existence of significant correlations between the resonance behaviour of the basin determined by the HVSR technique and the geological structures, suggesting that single station measurements are a promising tool for creating a rapid and preliminary non-invasive contribution to the characterization of the geothermal basin.  相似文献   

11.

Mendicino calcarenite was once widely used in traditional constructions by Italy’s foremost stonemasons’ schools. This paper provides a complete physico-mechanical characterization in order to improve understanding of strength and durability properties and so apply that knowledge to conservation and new construction. Stone samples from three lithofacies are taken from the following quarries of Cosenza province: Scannelle in Malito; Cannataro in Carolei; Albanese in San Lucido. Samples are subjected to: X-ray diffraction, mercury intrusion porosimetry, ultrasonic pulse velocity, capillary water absorption, uniaxial compressive, flexural, point load tests with respect to the X, Y, Z axes. Malito samples exhibit creamy colour, better hydric behaviour, low open porosity, reduced water absorption capability, isotropic hydric behaviour, higher fossil abundance (both in number and size) than the lithofacies taken from Carolei and San Lucido, which exhibit whitish colour, greater strength and more homogeneous texture. The greater compactness of Carolei and San Lucido samples can be ascribed to homogeneity and low porosity and their better mechanical properties to textural features. Anisotropy plays an important role. Placing stone samples along the Z axis prevents water intrusion, and improves mechanical strength. Isotropy and compact and heterogeneous fabric in stones result in higher strength and lower water absorption.

  相似文献   

12.
Noto is an important Baroque urban center in south-eastern Sicily, which was completely reconstructed after the severe earthquake of 1693. Most of its monuments and historic buildings were built in Pietra di Noto stone, a pale cream calcarenite, quarried in outcrops located near the city. This stone, still currently used as building material, is undergoing many forms of alteration and degradation, which cause significant damage to monuments. In this study, three commercial protective products were tested on some Noto calcarenite samples from quarries, with the aim of assessing their protective effectiveness. In particular, petrographic analyses by optical microscopy were carried out for textural characterization of the stone materials. Capillary water absorption, porosimetric and colorimetric procedures, UV radiation and salt crystallization aging tests were performed to better evaluate interactions between protective products and substrate.  相似文献   

13.
Stability analysis of historic underground quarries   总被引：1，自引：0，他引：1  
This work, carried out at the Department of Civil, Environmental and Territory Engineering and Architecture (DICATeA) of the University of Parma, analyzes the stability conditions of the ancient underground quarries of Viggiù (Varese, Italy). The objective of the study is to verify the actual structural predisposition to instability phenomena of the old Viggiù quarries, within the context of a historical and cultural valorization and recovery of the ancient ornamental stone quarries. These quarries, that are now completely abandoned, could be used as a tourist attraction and/or as a teaching environment. They are a wonderful example of industrial architecture by presenting an audacious composition of filled in trenches and room and pillar techniques. An experimental campaign based on in situ measurements and laboratory measurements has been carried out to characterize the rock mass and to determine rock mass mechanical features. A numerical model of the entire rock mass has been developed in order to analyze the stability of the entire underground openings. A preliminary monitoring phase has been realized, aimed at controlling abandoned rock structure movements at the most significant discontinuities. Some measurements of the vertical stress in the pillars and in the walls have been performed, as well, and used for the model calibration. Once the model has been calibrated, the analysis of the actual stress and deformation conditions has been evaluated, the stability condition of the entire structure computed and a forecasting analysis of any intervention that could be realized to guarantee the underground public access has been performed.  相似文献   

14.
The cutting operations of dimension stone at quarries produce a large amount of fines that, in turn, cause a negative environmental impact over local surface waters. This article presents a detailed analysis of the mobilized contamination associated with runoff waters in a large granite quarry (～200 ha) which is located in Porriño (Galicia, NW Spain), the most important production centre of dimension stone in Spain. There, an intensive monitoring survey was developed in order to characterize the hydrology of the system as well as the release and transport of pollutants. This was accomplished by means of different control sections for the flow and by the collection of 52 random water samples. Automatic samplers were also used to collect 192 water samples associated with runoff generated by significant rain events. For each of the samples collected, a wide battery of analytic determinations was performed, including solid loads, turbidity, organic pollution, nutrient and selected metals. Upon careful examination it has been possible to obtain different parameters related to the contamination control, like the “event mean concentration” (EMC), maximum concentrations and specific sediment loads. Moreover, a comprehensive statistical study including parameter correlation and cumulative probability analyses helped to understand the pollutant mobilization behaviour within the quarry system. It can be concluded that mobilized contamination shows the anomalous presence of some metals, whose concentrations are in excess when compared to the natural rock. This excess metal amount must be attributed to an anthropogenic source associated to mining and cutting operations.  相似文献   

15.
Performance prediction of diamond wire saws is important in the cost estimation and the planning of the stone quarries. An accurate estimation of sawability helps to make the planning of the rock cutting projects more efficient. In this paper, the performance prediction of diamond wire saws in cutting carbonate rocks was studied on 14 different carbonate rocks in stone quarries located in Iran. Rock samples were collected from the quarries for laboratory tests. Uniaxial compressive strength, Brazilian tensile strength, Schmidt hammer value, and Los Angeles abrasion were determined in the laboratory. Performance prediction was evaluated using simple and multiple regression analyses. Finally, a new model was proposed for predicting the production rate of diamond wire saw. It was concluded that the production rate of carbonate rock using diamond wire saw can reliably be estimated using the developed model.  相似文献   

16.
Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend.  相似文献   

17.
Limestone quarrying and quarry reclamation in Britain   总被引：1，自引：1，他引：0  
Limestones have been worked for many thousands of years — initially for building stone and agricultural lime and more recently for a wide range of construction and industrial uses. In most industrialized countries limestone quarries represent the most visually obvious and, in both process and landform terms, the most dramatic anthropogenic impact on karst terrain. However, quarrying has, to date, received surprisingly little attention from karst scientists. Research in the English Peak District suggested that the postexcavation evolution of quarried limestone rock faces was in part a result of the methods used in their excavation, and this led to the development of a technique designed to reduce the visual and environmental impacts of modern quarries by Landform replication. This involves the use of controlled restoration blasting techniques on quarried rock slopes to construct a landform sequence similar to that in the surrounding natural landscape. The constructed landforms are then partially revegetated using appropriate wildflower, grass, and/or tree species.  相似文献   

18.
Pure white marble has been considered a valuable ornamental and architectural material since ancient times. Many scientific techniques have been used to create an extensive data base of “finger-prints” characterizing white marbles from the major classical quarries. However, determining the provenance of white marbles is a difficult task due to their similarity in physical and chemical parameters. Three techniques (petrography, cathodoluminescence and stable C and O isotopes) have been used to characterize white marbles from the ancient quarries of the Iberian Peninsula. Maximum grain size, texture and isotopic composition can be used to identify the different quarries. Each area is generally represented by several cathodomicrofacies, but quantitative CL analysis is also helpful in distinguishing those quarries for which the data provided by other techniques are not sufficiently diagnostic. The database and the discriminating criteria presented in this study have been tentatively applied to some ancient sculptures from the National Museum of Roman Art in Merida (Spain).  相似文献   

19.
El Atshan mining area, central Eastern Desert, represents one of the uranium occurrences related to alkaline volcanic rocks in Egypt. Based on the plot of total alkali elements versus silica, these rocks are classified as trachytes. The U and Eu anomalies appear to be derived from trachyte exposed to a long period of alteration and rock–fluid interaction. The trachyte has been subjected to two phases of alteration. The pronounced chemical changes include the mobility of Si, Na, Fe, U, Zn and REE and the immobility of Mg, Th, Hf, Ta and Sc. The late stage hydrothermal solutions caused the breakdown of the feldspars by losing sodium, potassium and partially silica and eventually formation of argillic alteration products, dissolution of iron-bearing sulphides, formation of iron-oxy hydroxides and corrosion of primary uranium minerals forming uranyl oxide hydrates. The acidic water percolating through the fractured trachyte rock leached not only available major or trace elements, but also REE. Eu originally incorporated in feldspars as Eu+2 has been oxidized to Eu+3 and subsequently leached away leaving a negative anomaly in the host rock. The leached U and Eu were then transported most probably as carbonate complexes. The second phase of alteration occurred at the near surface profile when the late stage hydrothermal fluids cool to the temperature of meteoric water and may have mixed with it, the pH of the fluids would shift to more alkaline values and at these conditions U and Eu were precipitated into the fracture system mainly by being adsorbed on the clay minerals and probably coprecipitated with iron oxy-hydroxides.  相似文献   

20.
A multi-disciplinary study was undertaken of the Lower Old Red Sandstone building stones of Bromyard, Bromyard Downs and Bringsty Common, Herefordshire, UK, to trace their original quarry sources. 196 stone structures were recorded in detail and 3 broad lithological groups recognised. Combining old maps, archival sources, Light Detection and Ranging (LiDAR) data and testimony of local residents, the historic quarries in the area have been mapped. Field studies of the geology of quarries and outcrops have established the area of origin of two distinctive coarse grained lithologies. Intraformational conglomerates have been demonstrated, with some confidence, to be derived from Bromyard itself. Coarse, pebbly, quartzose sandstones have been traced to Bringsty Common and shown to be used only in the church in Bromyard before the 20th century. The origins of fine grained sandstone are found to be more complex. Through a combination of fieldwork and archival research, Clater Park Quarry is indicated as the origin of high quality green sandstones in Bromyard. 15 samples of sandstone from the Bromyard Downs, have been petrographically analysed by point counting to determine their clastic and mineralogical proportions. Early results of this analysis are presented which show modal variation in lithics, feldspars and cements that may serve to link quarries to buildings. Finally, it is suggested that at least some of the diversity of stone present in Bromyard is the result of slight variation in depositional processes in the immediately underlying bedrock.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号