共查询到20条相似文献，搜索用时 94 毫秒
1.
正交各向异性岩体中地下洞室稳定的粘弹-粘塑性三维有限元分析 总被引：5，自引：2，他引：5
建立了一种正交各向异性岩体的粘弹－粘塑性模型，推导和描述了相应的数值计算表达式和有限元分析的步骤，并使用所编制的三维有限元程序，以在层状岩体（横观各向同性介质）中的地下洞室开挖为算例，考察了围岩的流变动态，得出了几点结论。 相似文献
2.
在考虑横观各向同性含液饱和多孔介质固体骨架和流体可压缩性以及固体骨架的黏弹性特征下,基于横观各向同性含液饱和多孔介质u-w形式的三维动力控制方程,以固相位移u、液相相对位移w为基本未知量,综合运用Laplace变换、双重Fourier变换等方法,在直角坐标系下通过引入中间变量,将六元2阶动力控制方程组化为两组各含4个未知变量的常微分方程组,给出了直角坐标系下横观各向同性含液饱和多孔介质三维黏弹性动力反应的积分形式一般解;作为理论推导的验证,通过引入初始条件和边界条件,对横观各向同性含液饱和多孔介质半空间黏弹性瞬态反应问题进行了求解。解答的退化验证表明,所推导的理论解是正确的。 相似文献
3.
层状岩体由于层理面或者结构面的存在,在力学上具有横观各向同性的特点,现有的各向同性蠕变模型难以全面反映横观各向同性岩体的蠕变力学特性。为构建能够反映横观各向同性岩体的三维蠕变模型,以能反映瞬时应变、减速蠕变和稳态蠕变特征的黏弹性Burgers模型为基础,基于常泊松比假定,在三维各向同性蠕变本构方程的基础上,按照算子替换的方法,将横观各向同性柔度矩阵代替各向同性柔度矩阵,并考虑了平行和垂直层理方向岩体蠕变力学行为的差异性,推导了横观各向同性岩体的三维蠕变本构方程。根据本构方程的特点,提出了根据平行和垂直方向岩体蠕变试验结果进行三维蠕变本构模型中蠕变参数的辨识方法。将提出的模型应用于三轴蠕变试验参数辨识,从而获得了一套完整的三维蠕变参数,并与试验结果进行对比分析,从而验证了所提模型与方法的合理性和有效性。进一步,指出了传统蠕变试验设计方案的局限性,给出了横观各向同性材料蠕变试验设计建议。研究成果为研究岩体三维蠕变机制提供了新思路,可对岩体蠕变试验设计提供相应的科研支撑。 相似文献
4.
Acta Geotechnica - A numerical approach based on the particle discrete element theory is adopted to study the fracture evolution of transversely isotropic rocks with a pre-existing flaw under... 相似文献
5.
对横观各向同性地基上刚性矩形板进行了求解。首先,利用表面受矩形均布荷载作用下的层状横观各向同性地基的位移解答,获得地基的柔度矩阵;然后,通过刚性矩形基础与层状横观各向同性地基的协调条件,建立刚性矩形基础与横观各向同性地基共同作用的方程,进而求得基础的地基反力。通过编制相应的程序,确定了合理的网格划分值;最后,进行算例分析,分析了地基横观各向同性性质、矩形刚性基础的长宽比以及地基分层性对地基反力的影响。分析表明：以上3种因素对地基反力有重要影响。 相似文献
6.
Omid Saeidi Vamegh Rasouli Rashid Geranmayeh Vaneghi Raoof Gholami Seyed Rahman Torabi 《地学前缘(英文版)》2014,5(2):215-225
A modified failure criterion is proposed to determine the strength of transversely isotropic rocks. Me-chanical properties of some metamorphic and sedimentary rocks including gneiss, slate, marble, schist, shale, sandstone and limestone, which show transversely isotropic behavior, were taken into consider-ation. Afterward, introduced triaxial rock strength criterion was modified for transversely isotropic rocks. Through modification process an index was obtained that can be considered as a strength reduction parameter due to rock strength anisotropy. Comparison of the parameter with previous anisotropy in-dexes in literature showed reasonable results for the studied rock samples. The modified criterion was compared to modified Hoek-Brown and Ramamurthy criteria for different transversely isotropic rocks. It can be concluded that the modified failure criterion proposed in this study can be used for predicting the strength of transversely isotropic rocks. 相似文献
7.
横观各向同性饱和土体三维粘弹性动力分析 总被引：2，自引：2，他引：0
采用针对横观各向同性饱和土体u-w形式三维粘弹性动力方程,考虑土骨架的粘弹性性质且基于粘弹性理论,通过运用Fourier 展开、Laplace 和Hankel 积分变换方法和引入中间变量,将含有粘弹性参数的六元二阶偏微分运动控制方程组,化为2组各含4个未知变量的常微分方程组,从而给出了柱坐标系下粘弹性横观各向同性饱和土体在非轴对称动力荷载作用下的瞬态反应的土骨架位移分量、孔隙流体相对于土骨架的位移分量瞬态反应一般解。在此基础上,引入初始条件和边界条件,对垂直向和水平向动力荷载作用下半空间边值问题进行了求解。根据动力时域解答的一般解,利用Laplace和Hankel 数值逆变换技术,编制了相应的数值计算程序。并进行了实例验证和弹性、粘弹性解的对比分析。结果表明,在进行横观各向同性饱和土体动力分析时,考虑土骨架的粘弹性是必要的。 相似文献
8.
利用弹性矩形板与多层地基表面的竖向位移协调条件与光滑接触条件,由横观各向同性多层地基应力与位移非耦合的传递矩阵解,推导出弹性矩形板下竖向应力和位移的解析解。在此基础上,编制了相应的程序,并进行了数值计算。计算结果表明：矩形板刚度对板底竖向位移及板中心下的竖向应力有着较为显著的影响;板底竖向位移及板中心下的竖向应力随着板刚度的增加而减小,相同荷载作用下横观各向同性地基与均匀各向同性地基模型的计算结果差异较大,实际工程中很有必要采用更符合土体性质的横观各向同性地基模型 相似文献
9.
A hybrid analytical-numerical method is proposed for the dynamic analysis of single piles and pile groups embedded in semi-infinite transversely isotropic media. In the method proposed, the soil-pile system is modeled using finite elements combined with massless rigid radiation discs representing pile-soil-pile interaction. The elasto-dynamic response of the radiation discs buried at different depths in a transversely isotropic half-space is analytically derived in a transform domain using a set of complete potential functions. A Boussinesq-type loading distribution is introduced to act on the disc region to achieve the proper mode of deformation at the cross sections of piles. Numerical results and comparisons with known analytical/numerical solutions are presented, demonstrating the application of the method. 相似文献
10.
从常规三轴压缩试验得到横观各向同性土层的力学参数,综合9种来自于不同国家和地区的横观各向同性土层的土样参数,研究分析了横观各向同性土层参数对建筑物沉降的影响。作为典型例子,对上海一幢剪力墙结构的箱形基础与横观各向同性土进行共同作用分析,并与各向同性土层上的分析结果进行比较,结果表明：横观各向同性土层参数对沉降的影响有些不同,尤其是不排水加载条件确定的土层参数影响的结果大不相同。 相似文献
11.
In the framework of elastostatics, a mathematical treatment is presented for the boundary value problem of the interaction of a flexible cylindrical pile embedded in a transversely isotropic half‐space under transverse loadings. Taking the pile region as a stiffened subdomain of an extended half‐space, the formulation of the interaction problem is reduced to a Fredholm integral equation of the second kind. The necessary set of Green's functions for the transversely isotropic half‐space is obtained by means of a method of potentials. The resulting Green's functions are incorporated into a numerical procedure for the solution of the integral equation. The theoretical response of the pile is presented in terms of bending moment, displacement and slope profiles for a variety of transversely isotropic materials so that the effect of different anisotropy parameters can be meaningfully discussed. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
12.
13.
煤体中直立裂隙的多波地震响应及预测 总被引：1，自引：0，他引：1
裂隙探测是煤层气勘探开发与煤矿安全生产的重要研究内容。规则发育的直立裂隙在理论上可等效为具有水平对称轴的横向各向同性（HTI）介质,本文通过正演记录研究了HTI介质的多波地震响应,分析了裂隙发育方位对横波偏振特性的影响规律,在此基础上分析了利用横波记录的方位角道集获取地下裂隙参数的可行性与基本原理,为便于工业应用,文中研究了一种基于两个水平分量叠加剖面的角度扫描法求取地下目标煤层的裂隙发育方位。实际资料处理证明了该方法的准确性与可靠性。 相似文献
14.
We develop a new numerical model based on a precise integration method to investigate the coupled thermo-mechanical performance of layered transversely isotropic media around a cylindrical/tubular heat source. To obtain the relational matrices of the extended precise integration method, we first convert the governing equations of the problem into ordinary differential matrix equations through the Laplace–Hankel transform. Then, the cylindrical heat source is divided into a series of plane heat sources, and the plane temperature load term is added to the state vector between layer elements. By combining the layer elements, we build a layered transversely isotropic numerical model containing a cylindrical heat source in the transformed domain. Finally, we solve the model in the transformed domain and obtain the solution of the problem in the real domain through the Laplace–Hankel transform inversion. The accuracy of this method is verified by comparing the solutions with the results of the analytical method and the finite element method. Then, we study the influence of the anisotropy of thermal parameters, the embedded depth, the length/radius ratio, the type of heat source and the stratification of the medium on the thermo-mechanical coupled performance.
相似文献15.
基于层面法向局部坐标系中的横观各向同性弹性本构模型,根据层面产状方位角,推导出整体坐标系中弹性应力的转换方法。针对层状岩体的各向异性特征,将岩体的破坏模式细分为5种,分别对每一种破坏模式建立各自的判别函数和屈服准则,根据塑性流动正交法则推导出相应的应力修正迭代计算方法。通过单轴、三轴压缩数值试验,对层状岩体的强度和变形性质进行研究,分析层面倾角和围压对层状岩体力学行为的影响。将所建模型与FLAC3D自带的横观各向同性弹性模型以及遍布节理模型进行对比,验证模型的正确性及精度。同时,将模型应用于三向等压理想圆形隧洞的开挖计算中,分析层状岩体破坏方式受层面方位角影响的变化规律,分析结果表明层面对围岩破坏模式和塑性区扩展方向起到了控制作用。 相似文献
16.
Numerical Modelling of the Anisotropic Mechanical Behaviour of Opalinus Clay at the Laboratory-Scale Using FEM/DEM 总被引：1，自引：1，他引：0
Andrea Lisjak Bryan S. A. Tatone Giovanni Grasselli Tim Vietor 《Rock Mechanics and Rock Engineering》2014,47(1):187-206
The Opalinus Clay (OPA) is an argillaceous rock formation selected to host a deep geologic repository for high-level nuclear waste in Switzerland. It has been shown that the excavation damaged zone (EDZ) in this formation is heavily affected by the anisotropic mechanical response of the material related to the presence of bedding planes. In this context, the purpose of this study is twofold: (i) to illustrate the new developments that have been introduced into the combined finite-discrete element method (FEM/DEM) to model layered materials and (ii) to demonstrate the effectiveness of this new modelling approach in simulating the short-term mechanical response of OPA at the laboratory-scale. A transversely isotropic elastic constitutive law is implemented to account for the anisotropic elastic modulus, while a procedure to incorporate a distribution of preferentially oriented defects is devised to capture the anisotropic strength. Laboratory results of indirect tensile tests and uniaxial compression tests are used to calibrate the numerical model. Emergent strength and deformation properties, together with the simulated damage mechanisms, are shown to be in strong agreement with experimental observations. Subsequently, the calibrated model is validated by investigating the effect of confinement and the influence of the loading angle with respect to the specimen anisotropy. Simulated fracture patterns are discussed in the context of the theory of brittle rock failure and analyzed with reference to the EDZ formation mechanisms observed at the Mont Terri Underground Research Laboratory. 相似文献
17.
Acta Geotechnica - A new numerical approach based on the particle discrete element method (PDEM) is developed to investigate the mechanical behavior of transversely isotropic rocks with... 相似文献
18.
The subloading concept is an extension of mathematical plasticity which defines an internal surface to the conventional yield surface. It is indeed a versatile approach, especially for the modelling of soils under quasi-static cycles with smooth transitions from pure elastic to elastoplastic behaviour. For the case of isotropic hardening models, this paper demonstrates that the subloading isotropic plasticity is equivalent to a variable modulus approach and therefore a simpler and equivalent methodology can be adopted instead. In addition to demonstrating this equivalence, an alternative formulation that was presented elsewhere and that uses only one surface is briefly discussed. The alternative formulation can then be easily applied to popular models for soils such as the Cam clay model. Finally, some numerical predictions are presented in order to illustrate the capabilities of the subloading isotropic plasticity and the corresponding variable modulus approach. 相似文献
19.
Impact of constitutive models on the numerical analysis of underground constructions 总被引：1，自引：0，他引：1
The constitutive model frequently used in numerical calculations of tunnel excavation is linear-elastic perfectly plastic with a Mohr–Coulomb (MC) failure criterion. Generally, this leads to shallower and wider surface settlement troughs than those observed experimentally. It is therefore necessary to use adapted constitutive models for the design of underground works. In this paper, three constitutive models are implemented in a two-dimensional simulation of an underground excavation in plane strain: a linear-elastic perfectly plastic model (the MC model), an elastoplastic model with isotropic hardening [the hardening soil (HS) model, Schanz et al., Beyond 2000 in computational geotechnics, Balkema, Rotterdam, pp. 281–290, 1999] and an extension of this model which implies an evolution of the stiffness modulus in the small-strain range according to the strain level (the HS model with small-strain stiffness “HS-Small”, Benz, Small-strain stiffness of soils and its numerical consequences. Ph.D. thesis, Universitat Stuttgart, 189 pp., 2007). The study is based on the results of drained triaxial compression tests representing an overconsolidated clay (Gasparre, Advanced laboratory characterisation of London clay. Ph.D. thesis, Imperial College London, 598 pp., 2005); and is then applied to a shallow tunnel. The impact of the constitutive model is highlighted as well as the limits of the simplest constitutive model. 相似文献
20.
This paper treats the dynamic response of a multilayered transversely isotropic fluid saturated poroelastic half-space under surface time-harmonic traction. The governing system of partial differential equations is uncoupled with the use of a set of physically meaningful and complete potential functions that decompose different body waves in a saturated poroelastic transversely isotropic medium. After expressing the equations in the Hankel-Fourier domain, a proper algebraic factorization is applied to generate reflection and transmission matrices for decomposed waves. All responses including displacements, stresses, and pore fluid pressure for both general patch load and point load are presented in the form of semi-infinite line integrals. The verification of the method is confirmed with the degeneration of the solutions presented here to the existing solutions for dried both homogeneous and multilayered elastic half-spaces as well as poroelastic half-space. Selected numerical results are depicted to investigate the effects of layering and pore pressure on responses of a transversely isotropic poroelastic medium. The load distribution effects are studied by comparison of the patch and point load responses. Also, resonance notion and effective parameters on this phenomenon such as layering system and anisotropy contrast are discussed. Significant influence of materials and layering configuration on number and amplitude of resonances depicted through the numerical evaluation. 相似文献