首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 390 毫秒
1.
Apatite fission track analysis is used as a tectonic tool to unravel the evolution of the Sierra de Guadarrama, an mountain range in central Spain, and the far-field effects of the Alpine plate tectonics, expressed by reactivation of NE-SW trending lineaments in the Hercynian basement. 18 basement samples were analysed, and 4 sediments of Mesozoic and Tertiary age. Thermal histories were modelled for most samples and conversion to resultant amounts of denudation and rock uplift was possible for the Tertiary history, because of constraints on the paleo-topography and -elevation in Upper Cretaceous to Paleocene times. Accelerated cooling (up to 100 °C in 5 Ma) occurred around 100 Ma in the entire Sierra de Guadarrama. In the northern part, this cooling was preceded by reheating of Lower Triassic sediments up to 110 °C, suggesting sedimentation of about 3 km of, now eroded, Upper Triassic to Jurassic. The period of greatest erosion occurred in the Pliocene and Quaternary and affected almost the entire Sierra de Guadarrama. It was preceded by a Middle-Miocene cooling event that correlates with the beginning of the neo-tectonic setting of central Spain. The greatest Tertiary rock uplift occurred in the central part of the Sierra de Guadarrama: 5.9 ± 11.6 km. The Pliocene to recent event constitutes most of the Tertiary denudation. It is accommodated by active NE-SW trending reverse faults, and attended by about 3.2 km of denudation. These data fit as far-field effects in the plate tectonic setting of ongoing NW-SE oriented convergence between the European and African plate.  相似文献   

2.
In the interior of the Iberian Peninsula, the main geomorphic features, mountain ranges and basins, seems to be arranged in several directions whose origin can be related to the N–S plate convergence which occurred along the Cantabro–Pyrenean border during the Eocene–Lower Miocene time span. The Iberian Variscan basement accommodated part of this plate convergence in three E–W trending crustal folds as well as in the reactivation of two left-lateral NNE–SSW strike-slip belts. The rest of the convergence was assumed through the inversion of the Iberian Mesozoic Rift to form the Iberian Chain. This inversion gave rise to a process of oblique crustal shortening involving the development of two right lateral NW–SE shear zones. Crustal folds, strike-slip corridors and one inverted rift compose a tectonic mechanism of pure shear in which the shortening is solved vertically by the development of mountain ranges and related sedimentary basins. This model can be expanded to NW Africa, up to the Atlasic System, where N–S plate convergence seems also to be accommodated in several basement uplifts, Anti-Atlas and Meseta, and through the inversion of two Mesozoic rifts, High and Middle Atlas. In this tectonic situation, the microcontinent Iberia used to be firmly attached to Africa during most part of the Tertiary, in such a way that N–S compressive stresses could be transmitted from the collision of the Pyrenean boundary. This tectonic scenario implies that most part of the Tertiary Eurasia–Africa convergence was not accommodated along the Iberia–Africa interface, but in the Pyrenean plateboundary. A broad zone of distributed deformation resulted from the transmission of compressive stresses from the collision at the Pyrenean border. This distributed, intraplate deformation, can be easily related to the topographic pattern of the Africa–Eurasia interface at the longitude of the Iberian Peninsula.Shortening in the Rif–Betics external zones – and their related topographic features – must be conversely related to more “local” driven mechanisms, the westward displacement of the “exotic” Alboran domain, other than N–S convergence. The remaining NNW–SSE to NW–SE, latest Miocene up to Present convergence is also being accommodated in this zone straddling Iberia and Morocco, at the same time as a new ill-defined plate boundary that is being developed between Europe and Africa.  相似文献   

3.
Seven mylonitic samples and two coarse muscovites from the central Pyrenees have been dated by the 40Ar-39Ar method. Whole rock specimens of mylonite were cut out of thin-section chips allowing complete characterisation of mineralogy and texture. Several specimens showed rising staircase patterns in the range 50–90 Ma, with much higher ages in the highest temperature steps. This is believed to reflect mixing of argon released from micas with excess argon contained in plagioclase and released mainly at high temperatures. One biotite-quartz mylonite gave a plateau age of 93 ± 2 Ma. Other inferred mica ages are about 60–73 Ma for biotite and 50–60 Ma for muscovite; it is probable that biotite contains excess argon and that 50 Ma approximates to the cooling age in the mylonites. One coarse muscovite collected immediately below the major Mérens shear zone gave a Hercynian plateau age, while another collected within the Mérens zone gave a partially reset Hercynian age.Taken together, the data indicate that the shear zones were active in Alpine times < 100 Ma and probably about 50 Ma ago. They are believed to have formed during the early stages of Eocene compression in the Pyrenees. Deformation and resultant uplift probably terminated an important thermal event in this part of the Pyrenean basement, which may have begun at the time of the mid-Cretaceous North Pyrenean metamorphism (90–100 Ma).  相似文献   

4.
The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.  相似文献   

5.
Based on studies of images obtained from LANDSAT-1 and 2, several seemingly active movement zones have been delineated in a section of the eastern Alps and are being reported in the present paper for the first time. These zones, trending W—E to NW—SE, cut across all earlier Alpine boundaries and contacts and on either side along their length, are marked with drag effects, indicating their post-Alpine neotectonic nature. Their relation with the present-day central European stress field, as determined from fault-plane studies and in-situ stress measurements, has been sought. In conjunction with the evidence from neighbouring areas, a dextral shear tendency of the present-day Mediterranean is indicated. Further, a number of extensive lineaments have been observed in the Alpine section. Statistically, there are three major lineation sets trending N45°, N15°, N345°. They appear to have developed cogenetically as a result of shear and tensile failures due to a stress field with maximum principal stress oriented averagely at N15°. This direction of the maximum principal stress, deduced from the above lineation analysis of the eastern Alps, is in striking conformity with the one believed to have been in existence for the development of the Rhinegraben (N20°). It appears that the Rhinegraben and the Alpide belt have evolved cogenetically and concurrently under the same dominant stress field (P1 = N—NNE, P2 = vertical and P3 = E—ESE) and hence the two geotectonic features are really not antagonistic and mutually incompatible as usually believed on the grounds that one involves tension (taphrogenesis — Rhinegraben) and the other compression (orogenesis — Alpide belt) but are different manifestations of the same stress field. Besides, some additional light has been thrown on the possible controls of development of the Giudicaria Line and cause of predominance of NE—SW trending sinistral faults.  相似文献   

6.
The Iberian Chain is a wide intraplate deformation zone formed by the tectonic inversion during the Pyrenean orogeny of a Permian–Mesozoic basin developed in the eastern part of the Iberian Massif. The N–S convergence between Iberia and Eurasia from the Late Cretaceous to the Lower Miocene times produced significant intraplate deformation. The NW–SE oriented Castilian Branch of the Iberian Chain can be considered as a “key zone” where the proposed models for the Cenozoic tectonic evolution of the Iberian Chain can be tested. Structural style of basin inversion suggests mainly strike–slip displacements along previous NW–SE normal faults, developed mostly during the Mesozoic. To confirm this hypothesis, structural and basin evolution analysis, macrostructural Bouguer gravity anomaly analysis, detailed mapping and paleostress inversions have been used to prove the important role of strike slip deformation. In addition, we demonstrate that two main folding trends almost perpendicular (NE–SW to E–W and NW–SE) were simultaneously active in a wide transpressive zone. The two fold trends were generated by different mechanical behaviour, including buckling and bending under constrictive strain conditions. We propose that strain partitioning occurred with oblique compression and transpression during the Cenozoic.  相似文献   

7.
To study the relative and absolute timing of post-Variscan cooling and denudation processes in the Erzgebirge of the Mid-European Variscides, eight samples for apatite fission-track (AFT) analysis were collected from a ~1,300 m drill-core. The fission-track data reveal two stages of accelerated cooling through the apatite partial annealing zone (APAZ; i.e., 110±10–60 °C) in the Late Jurassic-Late Cretaceous and in the late Cenozoic, respectively. Late Jurassic-Late Cretaceous cooling corresponding to denudation of 1.5–5.9 km has been related to wrench tectonics along the Elbe Zone during Triassic-Jurassic Pangea breakup. Late Cenozoic exhumation of 2.1–5.6 km, and the increase of the geothermal gradient from 17±5 °C km–1 (Oligocene/Miocene) to 25–27 °C km–1 (recent) is likely connected to the formation of the Eger Graben starting from the Oligocene, as a result of the late Alpine orogenic phases.  相似文献   

8.
The Betic–Rif belt, in the western Mediterranean, experienced a pre-Alpine history and was later extensively reworked by major Alpine tectonics. There is abundant data showing that the Betic chain suffered very high cooling rates during its Alpine history, constrained mainly by geochronology using various isotopic systems and by palaeontological age determinations. In the westernmost part of the chain the high closure-temperature isotopic systems recorded Miocene high-grade metamorphism in the country rocks. In order to constrain the later stages of cooling, fission-track analysis has been applied to both zircon and apatite. The results point to extremely high rates of cooling (400 °C/Ma) between 21 and 19 Ma. Rates slowed to 100 °C/Ma for the time period 19 to about 12 Ma. The fission-track analysis also confirms the existence of an extensional tectonic stage between 19 and 17 Ma.  相似文献   

9.
We report the first apatite fission-track thermochronologic data for 17 samples from the southern Catalan Coastal Ranges of NE Spain. Thermal histories of Carboniferous metasediments, Late Hercynian intrusions and Lower-Triassic Buntsandstein sediments from three tectonic blocks, Miramar, Prades and Priorat, are derived and interpreted within the geodynamic framework and tectonic evolution of the region. The apatite fission-track ages range from 198±24 to 38±5 Ma and mean fission-track lengths are all <13.3 μm. Samples throughout the study area underwent total track annealing during the Late Hercynian magmatic episode, followed by fast cooling prior to the deposition of Lower Triassic sediments. The Lower Triassic sediments and basement rocks underwent a temperature increase during a first Mesozoic rift phase in Middle Triassic–Early Jurassic times resulting in the complete or near complete annealing of the fission-tracks. During a second Mesozoic rifting stage, in Late Jurassic to Early Cretaceous time, differential tectonic block activity is observed in the three studied tectonic blocks. Subsequently, during Late Cretaceous a long-period of thermal stability, detected in all samples, is related to the post-rift episode. The onset of fast cooling registered in the apatite fission track system during Paleogene times is related to the Pyrenean orogeny. Compressional forces associated with the ongoing southern migration of the convergence forces at the Iberian plate boundaries caused unroofing of about 2–3 km of material of the Prades and northwestern flank of the Priorat block. Extensional collapse in Late Oligocene–Miocene related to the Western Mediterranean rifting triggered the denudation of about 2 km of material from the southeastern flank of the Miramar, Prades and Priorat blocks.  相似文献   

10.
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.  相似文献   

11.
We describe and compare the two transform zones that connect the Icelandic rift segments and the mid-Atlantic Ridge close to the Icelandic hot spot, in terms of geometry of faulting and stress fields. The E–W trending South Iceland Seismic Zone is a diffuse shear zone with a Riedel fault pattern including N0°–N20°E trending right-lateral and N60°–N70°E trending left-lateral faults. The dominant stress field in this zone is characterised by NW–SE extension, in general agreement with left-lateral transform motion. The Tjörnes Fracture Zone includes three major lineaments at different stages of development. The most developed, the Húsavík–Flatey Fault, presents a relatively simple geometry with a major fault that trends ESE–WNW. The stress pattern is however complex, with two dominant directions of extension, E–W and NE–SW on average. Both these extensions are compatible with the right-lateral transform motion and reveal different behaviours in terms of coupling. Transform motion has unambiguous fault expression along a mature zone, a situation close to that of the Tjörnes Fracture Zone. In contrast, transform motion along the immature South Iceland Seismic Zone is expressed through a more complicate structural pattern. At the early stage of the transform process, relatively simple stress patterns prevail, with a single dominant stress field, whereas, when the transform zone is mature, moderate and low coupling situations may alternate, as a function of volcanic–tectonic crises and induce changes in stress orientation.  相似文献   

12.
The geometry and dynamics of the Mesozoic basins of the Weald–Boulonnais area have been controlled by the distribution of preexisting Variscan structures. The emergent Variscan frontal thrust faults are predominantly E–W oriented in southern England while in northern France they have a largely NW–SE orientation.Extension related to Tethyan and Atlantic opening has reactivated these faults and generated new faults that, together, have conditioned the resultant Mesozoic basin geometries. Jurassic to Cretaceous N–S extension gave the Weald–Boulonnais basin an asymmetric geometry with the greatest subsidence located along its NW margin. Late Cretaceous–Palaeogene N–S oriented Alpine (s.l.) compression inverted the basin and produced an E–W symmetrical anticline associated with many subsidiary anticlines or monoclines and reverse faults. In the Boulonnais extensional and contractional faults that controlled sedimentation and inversion of the Mesozoic basin are examined in the light of new field and reprocessed gravity data to establish possible controls exerted by preexisting Variscan structures.  相似文献   

13.
The Central European Basin System (CEBS) is composed of a series of subbasins, the largest of which are (1) the Norwegian–Danish Basin (2), the North German Basin extending westward into the southern North Sea and (3) the Polish Basin. A 3D structural model of the CEBS is presented, which integrates the thickness of the crust below the Permian and five layers representing the Permian–Cenozoic sediments. Structural interpretations derived from the 3D model and from backstripping are discussed with respect to published seismic data. The analysis of structural relationships across the CEBS suggests that basin evolution was controlled to a large degree by the presence of major zones of crustal weakness. The NW–SE-striking Tornquist Zone, the Ringkøbing-Fyn High (RFH) and the Elbe Fault System (EFS) provided the borders for the large Permo–Mesozoic basins, which developed along axes parallel to these fault systems. The Tornquist Zone, as the most prominent of these zones, limited the area affected by Permian–Cenozoic subsidence to the north. Movements along the Tornquist Zone, the margins of the Ringkøbing-Fyn High and the Elbe Fault System could have influenced basin initiation. Thermal destabilization of the crust between the major NW–SE-striking fault systems, however, was a second factor controlling the initiation and subsidence in the Permo–Mesozoic basins. In the Triassic, a change of the regional stress field caused the formation of large grabens (Central Graben, Horn Graben, Glückstadt Graben) perpendicular to the Tornquist Zone, the Ringkøbing-Fyn High and the Elbe Fault System. The resulting subsidence pattern can be explained by a superposition of declining thermal subsidence and regional extension. This led to a dissection of the Ringkøbing-Fyn High, resulting in offsets of the older NW–SE elements by the younger N–S elements. In the Late Cretaceous, the NW–SE elements were reactivated during compression, the direction of which was such that it did not favour inversion of N–S elements. A distinct change in subsidence controlling factors led to a shift of the main depocentre to the central North Sea in the Cenozoic. In this last phase, N–S-striking structures in the North Sea and NW–SE-striking structures in The Netherlands are reactivated as subsidence areas which are in line with the direction of present maximum compression. The Moho topography below the CEBS varies over a wide range. Below the N–S-trending Cenozoic depocentre in the North Sea, the crust is only 20 km thick compared to about 30 km below the largest part of the CEBS. The crust is up to 40 km thick below the Ringkøbing-Fyn High and up to 45 km along the Teisseyre–Tornquist Zone. Crustal thickness gradients are present across the Tornquist Zone and across the borders of the Ringkøbing-Fyn High but not across the Elbe Fault System. The N–S-striking structural elements are generally underlain by a thinner crust than the other parts of the CEBS.The main fault systems in the Permian to Cenozoic sediment fill of the CEBS are located above zones in the deeper crust across which a change in geophysical properties as P-wave velocities or gravimetric response is observed. This indicates that these structures served as templates in the crustal memory and that the prerift configuration of the continental crust is a major controlling factor for the subsequent basin evolution.  相似文献   

14.
In the Pyrenees, the development of mylonites zones is one of the most striking structural features. Two sets of mylonites of regional extent have been recognized: large longitudinal E-W to N110°E trending zones (e.g. Mérens fault and North Pyrenean fault) and oblique NW-SE trending zones cross-cutting both the Hercynian and the post-Hercynian terrains. The longitudinal zones limit the major structural zones of the Pyrenees and are associated with NW-SE “en échelons” folds in the Mesozoic terrains and rotations of rootless plutonic or gneissic massifs, acting as competent inclusions in a more ductile matrix, in the Hercynian basement. The oblique mylonite zones limit map-scale fold-bands and appear as the sheared limbs of these folds.The age of the oblique zones and of the major movements along the longitudinal zones is clearly Alpine and the “en échelons” folds seem to have controlled the sedimentation during the Upper Albian and possibly during the Upper Cretaceous. Early movements along the longitudinal zones may have been Hercynian.The analysis of the structures at all scales leads us to interpret these mylonite zones and associated structures as the ultimate result of a transcurrent simple shear acting during the whole Mesozoic period. This strike-slip shearing was probably associated with an extension perpendicular to it from the Permian to the Upper Cretaceous and then to a shortening component also perpendicular to it from the Late Cretaceous to the Eocene.The development of the mylonite zones appears to have predated the major Alpine thrusting but to have been reactivated during this thrusting, acting as initiation sites for the thrusts or as oblique ramps in the case of the oblique mylonite zones.  相似文献   

15.
The Iberian Peninsula and the Maghreb experience moderate earthquake activity and oblique,  NW–SE convergence between Africa and Eurasia at a rate of  5 mm/yr. Coeval extension in the Alboran Basin and a N35°E trending band of active, left-lateral shear deformation in the Alboran–Betic region are not straightforward to understand in the context of regional shortening, and evidence complexity of deformation at the plate contact. We estimate 86 seismic moment tensors (MW 3.3 to 6.9) from time domain inversion of near-regional waveforms in an intermediate period band. Those and previous moment tensors are used to describe regional faulting style and calculate average stress tensors. The solutions associated to the Trans-Alboran shear zone show predominantly strike-slip faulting, and indicate a clockwise rotation of the largest principal stress orientation compared to the regional convergence direction (σ1 at N350°E). At the N-Algerian and SW-Iberian margins, reverse faulting solutions dominate, corresponding to N350°E and N310°E compression, respectively. Over most of the Betic range and intraplate Iberia, we observe predominately normal faulting, and WSW–ENE extension (σ3 at N240°E). From GPS observations we estimate that more than 3 mm/yr of African (Nubian)–Eurasian plate convergence are currently accommodated at the N-Algerian margin,  2 mm/yr in the Moroccan Atlas, and  2 mm/yr at the SW-Iberian margin. 2 mm/yr is a reasonable estimate for convergence within the Alboran region, while Alboran extension can be quantified as  2.5 mm/yr along the stretching direction (N240°E). Superposition of both motions explains the observed left-lateral transtensional regime in the Trans-Alboran shear zone. Two potential driving mechanisms of differential motion of the Alboran–Betic–Gibraltar domain may coexist in the region: a secondary stress source other than plate convergence, related to regional-scale dynamic processes in the upper mantle of the Alboran region, as well as drag from the continental-scale motion of the Nubian plate along the southern limit of the region. In the Atlantic Ocean, the  3.5 mm/yr, westward motion of the Gibraltar Arc relative to intraplate Iberia can be accommodated at the transpressive SW-Iberian margin, while available GPS observations do not support an active subduction process in this area.  相似文献   

16.
A new tomographic image of the Pyrenean lithosphere from teleseismic data   总被引：1，自引：0，他引：1  
A new tomographic model of the Pyrenean lithosphere is determined down to 200 km depth from teleseismic P and PKP travel times, with a lateral resolution of 0.25°. Compared to previous models, two important improvements are 1) a larger number of stations with a more even distribution, in particular to the west of the range, and 2) the introduction, before inversion, of crustal corrections inferred from previous refraction and reflection experiments. This last point is crucial because a strong Moho jump (up to 20 km) is present at the North Pyrenean Fault, the former boundary between Eurasian and Iberian plates. The comparison of the models obtained with and without crustal corrections reveals the strong contamination of the models by the crust down to 100 km depth. In the uncorrected model, a large strip with negative P-velocity anomalies, previously interpreted as subduction of lower crust, is observed. It disappears in the corrected model. Moreover, the introduction of crustal corrections allows us to reveal short wavelength heterogeneities which were hidden by the crustal signal.An attempt is made to relate the heterogeneities revealed by the tomographic model with the tectonic history of the Pyrenees, in particular with the Alpine orogeny. The Alpine phase includes an extensive episode with generation of the thin continental crust and possibly the opening of an oceanic sea floor, and then a compressive stage. In our model, no signature of an oceanic subducted slab could be detected all along the range, a result which rules out the opening of a large oceanic floor before the compressive stage. A subduction of continental crust is possible but, due to the transformation of lower crust into eclogite at depth, it can not be detected by seismological methods, whereas it was observed from electrical and gravity data. To the East of the range, large heterogeneities with low velocities are ascribable to the Neogene extension related to the rotation of the Corso–Sardo block and the opening of the Gulf of Lion. A prominent high velocity anomaly extending down to 200 km in eastern-central Pyrenees could possibly be interpreted as a detached piece of the Tethys slab. In north of Iberia outside the range, deep (down to 200 km) low velocity structures oriented N130°E are probably related to Hercynian orogeny.  相似文献   

17.
The Achankovil Zone of southern India, a NW–SE trending lineament of 8–10 km in width and > 100 km length, is a kinematically debated crustal feature, considered to mark the boundary between the Madurai Granulite Block in the north and the Trivandrum Granulite Block in the south. Both these crustal blocks show evidence for ultrahigh-temperature metamorphism during the Pan-African orogeny, although the exhumation styles are markedly different. The Achankovil Zone is characterized by discontinuous strands of cordierite-bearing gneiss with an assemblage of cordierite + garnet + quartz + plagioclase + spinel + ilmenite + magnetite ± orthopyroxene ± biotite ± K-feldspar ± sillimanite. The lithology preserves several peak and post-peak metamorphic assemblages including: (1) orthopyroxene + garnet, (2) perthite and/or anti-perthite, (3) cordierite ± orthopyroxene corona around garnet, and (4) cordierite + quartz symplectite after garnet. We estimate the peak metamorphic conditions of these rocks using orthopyroxene-bearing geothermobarometers and feldspar solvus which yield 8.5–9.5 kbar and 940–1040 °C, the highest P–T conditions so far recorded from the Achankovil Zone. The retrograde conditions were obtained from cordierite-bearing geothermobarometers at 3.5–4.5 kbar and 720 ± 60 °C. From orthopyroxene chemistry, we record a multistage exhumation history for these rocks, which is closely comparable with those reported in recent studies from the Madurai Granulite Block, but different from those documented from the Trivandrum Granulite Block. An evaluation of the petrologic and geochronologic data, together with the nature of exhumation paths leads us to propose that the Achankovil Zone is probably the southern flank of the Madurai Granulite Block, and not a unit of the Trivandrum Granulite Block as presently believed. Post-tectonic alkali granites that form an array of “suturing plutons” along the margin of the Madurai Granulite Block and within the Achankovil Zone, but are absent in the Trivandrum Granulite Block, suggest that the boundary between the Madurai Granulite Block and the Trivandrum Granulite Block might lie along the Tenmalai shear zone at the southern extremity of the Achankovil Zone.  相似文献   

18.
The Rhine Rift System (RRS) forms part of the European Cenozoic Rift System (ECRIS) and transects the Variscan Orogen, Permo-Carboniferous troughs and Late Permian to Mesozoic thermal sag basins. Crustal and lithospheric thicknesses range in the RRS area between 24–36 km and 50–120 km, respectively. We discuss processes controlling the transformation of the orogenically destabilised Variscan lithosphere into an end-Mesozoic stabilised cratonic lithosphere, as well as its renewed destabilisation during the Cenozoic development of ECRIS. By end-Westphalian times, the major sutures of the Variscan Orogen were associated with 45–60 km deep crustal roots. During the Stephanian-Early Permian, regional exhumation of the Variscides was controlled by their wrench deformation, detachment of subducted lithospheric slabs, asthenospheric upwelling and thermal thinning of the mantle-lithosphere. By late Early Permian times, when asthenospheric temperatures returned to ambient levels, lithospheric thicknesses ranged between 40 km and 80 km, whilst the thickness of the crust was reduced to 28–35 km in response to its regional erosional and local tectonic unroofing and the interaction of mantle-derived melts with its basal parts. Re-equilibration of the lithosphere-asthenosphere system governed the subsidence of Late Permian-Mesozoic thermal sag basins that covered much of the RRS area. By end-Cretaceous times, lithospheric thicknesses had increased to 100–120 km. Paleocene mantle plumes caused renewed thermal weakening of the lithosphere. Starting in the late Eocene, ECRIS evolved in the Pyrenean and Alpine foreland by passive rifting under a collision-related north-directed compressional stress field. Following end-Oligocene consolidation of the Pyrenees, west- and northwest-directed stresses originating in the Alps controlled further development of ECRIS. The RRS remained active until the Present, whilst the southern branch of ECRIS aborted in the early Miocene. Extensional strain across ECRIS amounts to some 7 km. Plume-related thermal thinning of the lithosphere underlies uplift of the Rhenish Massif and Massif Central. Lithospheric folding controlled uplift of the Vosges-Black Forest Arch.  相似文献   

19.
Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)   总被引：1，自引：0，他引：1  
Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:
(1) Late Oligocene–Aquitanian to Early Tortonian: σ1 subhorizontal N–S, partly E–W directed, σ3 subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;
(2) Early Tortonian to Pliocene–Pleistocene: σ1 subvertical, σ3 subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;
(3) Pleistocene to Recent: (3a) σ1 subvertical, σ3 subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ1 subhorizontal NW directed, σ3 NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ1 and σ2.
Keywords: Neotectonics; Paleostress; Fault-slip data; Deformation history; Betic Cordilleras  相似文献   

20.
A statistical analysis was carried out to investigate spatial associations between natural seismicity and faults in southeastern Ontario and north-central New York State (between 73°18′ and 77°00′W and 43°30′ and 45°18′N). The study area is situated to the west of the seismically active St. Lawrence fault zone, and to the east of the Lake Ontario basin where recently documented geological and geophysical evidence points to possible neotectonic faulting. The weights of evidence method was used to judge the spatial associations between seismic events and populations of faults in eight arbitrarily defined orientation groups. Spatial analysis of data sets for seismic events in the periods 1930–1970 and post-1970 suggest stronger spatial associations between earthquake epicentres and faults with strikes that lie in the NW–SE quadrants, and weaker spatial associations of epicentres with faults that have strikes in the NE–SW quadrants. The strongest spatial associations were determined for groups of faults with strikes between 101° and 146°. The results suggest that faults striking broadly NW–SE, at high angles to the regional maximum horizontal compressive stress, are statistically more likely to be spatially associated with seismic events than faults striking broadly NE–SW. If the positive spatial associations can be interpreted as indicating genetic relationships between earthquakes and mapped faults, then the results may suggest that, as a population, NW–SE trending faults are more likely to be seismically active than NE–SW striking faults. Detailed geological studies of faults in the study area would be required to determine possible neotectonic displacements and the kinematics of the displacements.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号