共查询到20条相似文献，搜索用时 31 毫秒
1.
A method for analysis of response of axisymmetric towers partly submerged in water to earthquake ground motion is presented. The tower is idealized as a finite element system. The hydrodynamic terms are determined by solving the Laplace equation, governing the dynamics of incompressible fluids, subject to appropriate boundary conditions. For cylindrical towers, these solutions are obtained as explicit mathematical solutions of the boundary value problems; whereas they are obtained by the finite element method in case of towers with non-cylindrical outside surface. The response to earthquake ground motion is determined by step-by-step integration of the equations of motion. Analyses of two actual intake towers are presented to illustrate results obtained by this method. The small computation times required for these analyses demonstrate that the method is very efficient. The effectiveness of this formulation lies in avoiding the analysis of a large system by using a substructure approach and in exploiting the important feature that structural response to earthquake ground motion is essentially contained in the first few modes of vibration of the tower with no surrounding water. 相似文献
2.
A frequency‐dependent and intensity‐dependent macroelement for reduced order seismic analysis of soil‐structure interacting systems 
下载免费PDF全文
下载免费PDF全文 The computational demand of the soil‐structure interaction analysis for the design and assessment of structures, as well as for the evaluation of their life‐cycle cost and risk exposure, has led the civil engineering community to the development of a variety of methods toward the model order reduction of the coupled soil‐structure dynamic system in earthquake regions. Different approaches have been proposed in the past as computationally efficient alternatives to the conventional finite element model simulation of the complete soil‐structure domain, such as the nonlinear lumped spring, the macroelement method, and the substructure partition method. Yet no approach was capable of capturing simultaneously the frequency‐dependent dynamic properties along with the nonlinear behavior of the condensed segment of the overall soil‐structure system under strong earthquake ground motion, thus generating an imbalance between the modeling refinement achieved for the soil and the structure. To this end, a dual frequency‐dependent and intensity‐dependent expansion of the lumped parameter modeling method is proposed in the current paper, materialized through a multiobjective algorithm, capable of closely approximating the behavior of the nonlinear dynamic system of the condensed segment. This is essentially the extension of an established methodology, also developed by the authors, in the inelastic domain. The efficiency of the proposed methodology is validated for the case of a bridge foundation system, wherein the seismic response is comparatively assessed for both the proposed method and the detailed finite element model. The above expansion is deemed a computationally efficient and reliable method for simultaneously considering the frequency and amplitude dependence of soil‐foundation systems in the framework of nonlinear seismic analysis of soil‐structure interaction systems. 相似文献
3.
Direct finite element method for nonlinear analysis of semi‐unbounded dam–water–foundation rock systems 下载免费PDF全文
下载免费PDF全文 A direct finite element method is presented for nonlinear earthquake analysis of interacting dam–water–foundation rock systems. The analysis procedure applies viscous damper absorbing boundaries to truncate the semi‐unbounded fluid and foundation‐rock domains and specifies at these boundaries effective earthquake forces determined from the design ground motion defined at a control point on the free surface. The analysis procedure is validated numerically by computing the frequency response functions and transient response of an idealized dam–water–foundation rock system and comparing with results from the substructure method. Because the analysis procedure is applicable to nonlinear systems, it allows for modeling of concrete cracking, as well as sliding and separation at construction joints, lift joints, and at concrete–rock interfaces. Implementation of the procedure is facilitated by commercial finite element software with nonlinear material models that permit modeling of viscous damper boundaries and specification of effective earthquake forces at these boundaries. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
4.
5.
The available procedure for earthquake analysis of axisymmetric intake-outlet towers is extended to towers of arbitrary geometry, but with two axes of plan symmetry, and to include the effects of tower-foundation-soil interaction. The total system is represented as four substructures: tower, surrounding water, contained water and the foundation supported on flexible soil. The substructure representation of the system permits use of the most effective idealization for each substructure. An example earthquake response analysis is presented to demonstrate the results obtained from the analysis procedure. Computation times for several cases are included to demonstrate the efficiency of the analysis procedure. 相似文献
6.
In this paper a probabilistic approach has been adopted to study both the effects of uncertainty in earthquake frequency content and the correlation between earthquake frequency content and ground motion intensity on the response of a single-storey torsionally coupled elastic structure. The earthquake ground motion has been assumed to be a Gaussian, zero mean, stationary random process which is fully characterized by a power spectrum. The ground acceleration power spectrum is idealized as a probabilistic normalized power spectrum computed from actual earthquake records. The advantage of such an idealization is that it enables the effect of the natural frequency as a controlling structural parameter in torsional coupling to be assessed. Comparisons of the dynamic amplifications of eccentricity with those obtained from modern codes of practice and conventional response spectrum analyses have been made. The results of this study have shown that the variation in the frequency content has a significant effect on the response of low frequency structures, while the correlation between the frequency content and the intensity of seismic ground motion is insignificant for the wide range of structures considered. The structure natural frequency has been shown to be an important controlling parameter in the torsionally coupled response of structures subject to seismic loading. The frequency dependence of the dynamic amplification of eccentricity was found not to be reflected in the response spectrum analysis and the torsional provisions of modern building codes. 相似文献
7.
8.
Two equivalent semi-discrete formulations are presented for the problem of the transient response of soil-structure interaction systems to seismic excitation, considering linear behaviour of the soil material and arbitrary non-linear structural properties. One formulation results in a direct method of analysis in which the motion in the structure and the entire soil medium, rendered finite by an artificial absorbing boundary, is determined simultaneously. The other represents a substructuring technique in which the structure and the soil are analysed separately. The forces induced in the discretized system by the incident seismic motion are obtained as part of the general formulation by using the free-field motion of the unaltered soil as the earthquake input. It is shown that these forces act within the soil region in the direct method, but only on the soil-structure interface in the substructure formulation. Both sets of forces, however, involve only the displacements and tractions acting on the fictitious surface in the unaltered (linear) soil which coincides with the soil-structure interface of the complete system. It is shown, further, that the free-field displacements alone define a minimal set of data for evaluating the seismic response of the structure, since the tractions and displacements on that surface are interrelated. In practice, the minimal set must be obtained by extrapolating the available information, as the free-field ground motion at a site is usually specified at a single reference point. 相似文献
9.
考虑地面差动的相邻结构—地基—土相互作用 总被引：7，自引：6，他引：7
本文按地质条件在竖直方向将地基分为若干层，在每层只和样条有限元和半解析无限元分析建筑物下的有限区域和外围的无限区域，并引入了地面差动的概念，对地基－土系统上相邻结构的相互作用进行了分析，得到了结构之间间距变化对相邻结构相互作用影响的一些规律。 相似文献
10.
A study of the dynamic response of offshore structures to simultaneous loadings by random earthquake ground motions and random sea waves is presented. Emphasis is placed on the evaluation of dynamic soil-structure interaction effects and also on the evaluation of non-linear hydrodynamic damping effects due to sea waves for the seismic response. The structure is discretized using the finite element method. Sea waves are represented by Bretschneider's power spectrum and the Morison equation defines the wave forcing function. The Tajimi-Kanai power spectrum is used for the horizontal ground acceleration due to earthquakes. The governing equations of motion are obtained by the substructure method. Response analysis is carried out using the frequency-domain random vibration approach. It is found that the first few vibrational modes contribute significantly to the dynamic response. The response due to earthquake loadings is larger when the soil-structure interaction effects are considered. The hydrodynamic damping forces are higher in random seas than in still water and sea waves reduce the seismic response of offshore structures. Studies on the first passage probabilities of response indicate that small sea waves enhance the reliability of offshore structures against earthquake forces. 相似文献
11.
软土具有高灵敏度、低强度等特性,在地震过程中极易产生震陷。基于OpenSees数值模拟方法对软土场地的震陷反应进行非线性动力有限元分析,通过改变地震动峰值加速度、频谱特性、输入方式来研究其对软土震陷的影响。结果表明,地震动峰值加速度对地基土的不均匀震陷有显著影响,地震动峰值加速度越大,震陷量显著增大,震陷影响深度更大,对水平地表造成的破坏范围也更大;地震动频谱特性对软土震陷有重要影响,当地震动卓越频率与场地自振频率相近时,其幅值越大,产生的震陷越严重;水平、竖向同时输入地震动的方式能更好地反映土体的振动及震陷响应。该研究成果对探索软土震陷的机理有一定的指导意义。 相似文献
12.
The mechanism of earthquake energy input to building structures is clarified by considering the surface ground amplification and soil–structure interaction. The earthquake input energies to superstructures, soil–foundation systems and total swaying–rocking system are obtained by taking the corresponding appropriate free bodies into account and defining the energy transfer functions. It has been made clear that, when the ground surface motion is white, the input energy to the swaying–rocking model is constant regardless of the soil property (input energy constant property). The upper bound of earthquake input energy to the swaying–rocking model is derived for the model including the surface ground amplification by taking full advantage of the above-mentioned input energy constant property and introducing the envelope function for the transfer function of the surface ground amplification. Extension of the theory to a general earthquake ground motion model at the engineering bedrock is also made by taking full advantage of the above-mentioned input energy constant property. 相似文献
13.
复杂场地的土层地震反应分析对结构的地震反应计算及抗震安全性评价有重要意义。采用直接有限元法对土层进行三维建模,可使系统的计算力学模型更加符合实际情况。但由此带来的计算量之大,使得传统的计算方法难以胜任。在此背景下,本文利用静力子结构方法推导了在多点输入模式下进行土层地震反应分析时拟静力位移的求解步骤,并通过均匀土层算例验证了行波输入下利用约束子结构模态综合法进行复杂场地地震反应分析的可行性。 相似文献
14.
This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
This paper presents an input and system identification technique for a soil–structure interaction system using earthquake response data. Identification is carried out on the Hualien large‐scale seismic test structure, which was built in Taiwan for international joint research. The identified quantities are the input ground acceleration as well as the shear wave velocities of the near‐field soil regions and Young's moduli of the shell sections of the structure. The earthquake response analysis on the soil–structure interaction system is carried out using the finite element method incorporating the infinite element formulation for the unbounded layered soil medium and the substructured wave input technique. The criterion function for the parameter estimation is constructed using the frequency response amplitude ratios of the earthquake responses measured at several points of the structure, so that the information on the input motion may be excluded. The constrained steepest descent method is employed to obtain the revised parameters. The simulated earthquake responses using the identified parameters and input ground motion show excellent agreement with the measured responses. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
16.
An accelerometer array at Pacoima Dam with three locations along the base and abutments recorded ground motion from a magnitude 4.3 earthquake on 13 January 2001. These records present an opportunity to study spatial nonuniformity for the motion in a canyon. Topographic amplification is characterized by ratios of response spectral displacement between locations, and seismic wave travel times are studied using cross‐correlation functions to obtain delays. Results of the analysis of the 2001 earthquake records are used to generate ground motion for the 1994 Northridge earthquake to replace records that were not able to be fully digitized. The ground motion generated for the Northridge earthquake is used as input to a finite element model of Pacoima Dam. The response of the model is consistent with observations of Pacoima Dam after the Northridge earthquake. Comparison of the response due to nonuniform input with the response due to uniform input demonstrates the importance of accounting for spatial nonuniformity because of the significance that the pseudostatic component has for the response to nonuniform input. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
17.
大型换流站阀厅结构地震响应弹塑性分析 总被引：1，自引：0，他引：1
利用有限元方法对带悬挂阀的阀厅结构进行地震响应弹塑性分析,研究不同场地土条件、不同地震动作用对阀厅结构以及悬吊设备地震响应的影响.研究结果表明:阀厅结构在纵向和三向地震作用下存在较明显的扭转效应;三向地震输入时,吊杆产生的拉力约为单向输入的2倍;悬吊设备竖向地震响应大于水平地震响应,大震下悬吊设备竖向加速度约为水平向的... 相似文献
18.
Yasushi Ikegami Kazuki Koketsu Takeshi Kimura Hiroe Miyake 《Journal of Seismology》2008,12(2):161-172
Large earthquakes at shallow depths commonly excite long-period ground motions in distant sedimentary basins, thereby inflicting
damage upon large-scale structures. For example, the 2003 Tokachi-oki earthquake, Japan, damaged oil tanks in the Yufutsu
Basin, located 250 km from the epicenter. Similar long-range effects were also observed during the 2004 earthquake off Kii
Peninsula, Japan. In this study, we present the results of simulations of these earthquakes undertaken using the finite element
method (FEM) with a voxel mesh. In addition, to examine whether the 1906 San Francisco earthquake excited long-period ground
motions in the Los Angeles-area basins, we performed long-period ground motion simulations of most of the California region.
The FEM simulations confirmed the importance of path effects for the development of long-period ground motions. 相似文献
19.
区域性地震波强地面运动的量化数值模拟分析结果可以用来指导城市规划建设,并在防震减灾中发挥重要作用. 本文采用有限元数值模拟方法来模拟由地震激发的区域地震波强地面运动过程,并得到地表峰值速度和加速度的分布特征.考虑到福州是东南沿海的重要省会城市,其明显的盆地结构特征使它很容易遭受强地震灾害的影响. 因此本文以福州盆地为主要研究对象,假定盆地的主要断层某一位置在未来可能发生灾害性地震,则该地震会激发地震波的强地面运动,并由于地形、沉积层等主要影响,在盆地内部发生放大.通过对地震波传播过程的数值模拟和后处理分析,给出了该盆地的地表峰值位移、峰值速度和峰值加速度分布图谱.该图谱可为未来的福州城市规划和抗震减灾提供定量科学参考依据. 相似文献
20.
文中通过收集整理三河-平谷8级地震的历史记录、野外地质调查和区域地震等资料,建立了该地震的震源模型;以穿过研究区的12条测线和区域第四纪、新近纪、古近纪沉积等厚度图等资料为基础,建立了北京地区的传播介质模型;利用哈尔滨工程力学研究所的近断层强地震动有限元程序和40节点的高性能并行计算机计算了北京地区震后60s内地表各点的地震动速度时程和峰值速度。为检验模拟结果的质量,我们取2排测点的速度时程和水平向峰值速度等值线图进行了分析,发现计算结果与历史地震记录及实际地震观测资料吻合良好,说明了我们的模拟结果的可信性和模拟方法的客观性 相似文献