首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 312 毫秒
1.
In hard-rock terrain, due to the lack of primary porosity in the bedrock, joints, fault zones, and weathered zones are the sources for groundwater occurrence and movement. To study the groundwater potential in the hard-rock terrain and drought-prone area in the Niva River basin, southern Andhra Pradesh state, India, Landsat 5 photographic data were used to prepare an integrated hydrogeomorphology map. Larsson's integrated deformation model was applied to identify the various fracture systems, to pinpoint those younger tensile fracture sets that are the main groundwater reservoirs, and to understand the importance of fracture density in groundwater prospecting. N35°–55°E fractures were identified as tensile and N35°–55°W fractures as both tensile and shear in the study area. Apparently, these fractures are the youngest open fractures. Wherever N35°–55°E and N35°–55°W fracture densities are high, weathered-zone thickness is greater, water-table fluctuations are small, and well yields are high. Groundwater-potential zones were delineated and classified as very good, good to very good, moderate to good, and poor. Electronic Publication  相似文献   

2.
Recently, the deterioration of water quality in the coastal zones of Lekki Peninsula area of Lagos due to saltwater infiltration into the freshwater aquifer has become a major concern. With the aim of providing valuable information on the hydrogeologic system of the aquifers, the subsurface lithology and delineating the groundwater salinity, vertical electrical resistivity (VES) sounding survey was carried out utilizing surface Schlumberger electrode arrays, and electrode spacing varying between 1 and 150 m. The DC resistivity surveys revealed significant variations in subsurface resistivity. Also, the VES resistivity curves showed a dominant trend of decreasing resistivity with depth (thus increasing salinity). In general, the presence of four distinct resistivity zones were delineated viz.: the unconsolidated dry sand (A) having resistivity values ranging between 125 and 1,028 Ωm represent the first layer; the fresh water-saturated soil (zone B) having resistivity values which correspond to 32–256 Ωm is the second layer; the third layer (zone C) is interpreted as the mixing (transition) zone of fresh with brackish groundwater. The resistivity of this layer ranges from 4 to 32 Ωm; while layer four (zone D) is characterized with resistivities values generally below 4 Ωm reflecting an aquifer possibly containing brine. The rock matrix, salinity and water saturation are the major factors controlling the resistivity of the formation. Moreover, this investigation shows that saline water intrusion into the aquifers can be accurately mapped using surface DC resistivity method.  相似文献   

3.
The Marcona–Mina Justa deposit cluster, hosted by Lower Paleozoic metaclastic rocks and Middle Jurassic shallow marine andesites, incorporates the most important known magnetite mineralization in the Andes at Marcona (1.9 Gt at 55.4% Fe and 0.12% Cu) and one of the few major iron oxide–copper–gold (IOCG) deposits with economic Cu grades (346.6 Mt at 0.71% Cu, 3.8 g/t Ag and 0.03 g/t Au) at Mina Justa. The Middle Jurassic Marcona deposit is centred in Ica Department, Perú, and the Lower Cretaceous Mina Justa Cu (Ag, Au) prospect is located 3–4 km to the northeast. New fluid inclusion studies, including laser ablation time-of-flight inductively coupled plasma mass spectrometry (LA-TOF-ICPMS) analysis, integrated with sulphur, oxygen, hydrogen and carbon isotope analyses of minerals with well-defined paragenetic relationships, clarify the nature and origin of the hydrothermal fluid responsible for these contiguous but genetically contrasted deposits. At Marcona, early, sulphide-free stage M-III magnetite–biotite–calcic amphibole assemblages are inferred to have crystallized from a 700–800°C Fe oxide melt with a δ18O value from +5.2‰ to +7.7‰. Stage M-IV magnetite–phlogopite–calcic amphibole–sulphide assemblages were subsequently precipitated from 430–600°C aqueous fluids with dominantly magmatic isotopic compositions (δ34S = +0.8‰ to +5.9‰; δ18O = +9.6‰ to +12.2‰; δD = −73‰ to −43‰; and δ13C = −3.3‰). Stages M-III and M-IV account for over 95% of the magnetite mineralization at Marcona. Subsequent non-economic, lower temperature sulphide–calcite–amphibole assemblages (stage M-V) were deposited from fluids with similar δ34S (+1.8‰ to +5.0‰), δ18O (+10.1‰ to +12.5‰) and δ13C (−3.4‰), but higher δD values (average −8‰). Several groups of lower (<200°C, with a mode at 120°C) and higher temperature (>200°C) fluids can be recognized in the main polymetallic (Cu, Zn, Pb) sulphide stage M-V and may record the involvement of modified seawater. At Mina Justa, early magnetite–pyrite assemblages precipitated from a magmatic fluid (δ34S = +0.8‰ to +3.9‰; δ18O = +9.5‰ to +11.5‰) at 540–600°C, whereas ensuing chalcopyrite–bornite–digenite–chalcocite–hematite–calcite mineralization was the product of non-magmatic, probably evaporite-sourced, brines with δ34S ≥ +29‰, δ18O = 0.1‰ and δ13C = −8.3‰. Two groups of fluids were involved in the Cu mineralization stage: (1) Ca-rich, low-temperature (approx. 140°C) and high-salinity, plausibly a basinal brine and (2) Na (–K)-dominant with a low-temperature (approx. 140°C) and low-salinity probably meteoric water. LA-TOF-ICPMS analyses show that fluids at the magnetite–pyrite stage were Cu-barren, but that those associated with external fluids in later stages were enriched in Cu and Zn, suggesting such fluids could have been critical for the economic Cu mineralization in Andean IOCG deposits.  相似文献   

4.
 Drilling of 15 boreholes at a disused liquid waste disposal site near Perth, Western Australia, has indicated that a contamination plume extends about 1000 m in a southerly direction from the site in the direction of groundwater flow. The plume is up to 600 m wide and 5–40 m thick. Chemical and microbiological analyses have indicated that contaminated groundwater contains high concentrations of ammonia, iron, and bacteria at levels that commonly exceed national drinking water guidelines. It is likely that a proposed water supply production well in the path of the contamination plume will have to be abandoned, and additional wells may have to be abandoned if the plume continues to extend in the direction of groundwater flow. There is currently insufficient information to indicate whether the plume is continuing to expand, but studies on similar plumes in the Perth metropolitan area have indicated that contaminated groundwater can move at rates up to 100 m yr–1. Several other liquid waste disposal sites are now located in residential areas of Perth where wells are used for garden irrigation. Further work is required to ensure that there is no potential impact of groundwater contamination on public health in these areas. Received: 31 July 1995 · Accepted: 18 September 1995  相似文献   

5.
Geophysical surveys were carried out in an arsenic contaminated area, in the Ron Phibun District in southern Thailand. Here, tin and associated minerals, i.e. arsenopyrite and pyrite, have been extracted from granites and natural processes and the mining activities led to arsenic contamination in the environment. Electrical resistivity and self-potential (SP) were used to define the distribution of arsenic contamination in the groundwater. Resistivities of 25–100 Ωm and a positive SP anomaly of 66.0 mV were observed in an area where the arsenic content in auger water at 3.5–5.0 m depths was high, 0.5–5.0 mg/l. Integrated interpretation of resistivity, seismic refraction, GPR and gravity data gave a clear image of subsurface shallow structures (< 30 m depths). There was a good correlation between the resistivity and the gravity data. A subsurface rise was found, which possibly acts as a naturally buried dam, separating a high-contaminated area from a low contaminated area.  相似文献   

6.
Located adjacent to the Banded Gneissic Complex, Rampura–Agucha is the only sulfide ore deposit discovered to date within the Precambrian basement gneisses of Rajasthan. The massive Zn–(Pb) sulfide orebody occurs within graphite–biotite–sillimanite schist along with garnet–biotite–sillimanite gneiss, calc–silicate gneisses, amphibolites, and garnet-bearing leucosomes. Plagioclase–hornblende thermometry in amphibolites yielded a peak metamorphic temperature of 720–780°C, whereas temperatures obtained from Fe–Mg exchange between garnet and biotite (580–610°C) in the pelites correspond to postpeak resetting. Thermodynamic considerations of pertinent silicate equilibria, coupled with sphalerite geobarometry, furnished part of a clockwise P–T–t path with peak P–T of ∼6.2 kbar and 780°C, attained during granulite grade metamorphism of the major Zn-rich stratiform sedimentary exhalative deposits orebody and its host rocks. Arsenopyrite composition in the metamorphosed ore yielded a temperature [and log f(S 2)] range of 352°C (−8.2) to 490°C (−4.64), thus indicating its retrograde nature. Contrary to earlier research on the retrogressed nature of graphite, Raman spectroscopic studies on graphite in the metamorphosed ore reveal variable degree of preservation of prograde graphite crystals (490 ± 43°C with a maximum at 593°C). The main orebody is mineralogically simple (sphalerite, pyrite, pyrrhotite, arsenopyrite, galena), deformed and metamorphosed while the Pb–Ag-rich sulfosalt-bearing veins and pods that are irregularly distributed within the hanging wall calc–silicate gneisses show no evidence of deformation and metamorphism. The sulfosalt minerals identified include freibergite, boulangerite, pyrargyrite, stephanite, diaphorite, Mn–jamesonite, Cu-free meneghinite, and semseyite; the last three are reported from Agucha for the first time. Stability relations of Cu-free meneghinite and semseyite in the Pb–Ag-rich ores constrain temperatures at >550°C and <300°C, respectively. Features such as (1) low galena–sphalerite interfacial angles, (2) presence of multiphase sulfide–sulfosalt inclusions, (3) microcracks filled with galena (±pyrargyrite) without any hydrothermal alteration, and (4) high contents of Zn, Ag (and Sb) in galena, indicate partial melting in the PbS–Fe0.96S–ZnS–(1% Ag2S ± CuFeS2) system, which was critical for metamorphic remobilization of the Rampura–Agucha deposit.  相似文献   

7.
The city of Burdur, which is built on an alluvium aquifer, is located in one of the most seismically active zones in southwestern Turkey. The soil properties in the study site are characterized by unconsolidated and water-saturated sediments including silty, clayey and sandy units, and shallow groundwater level is the other characteristic of the site. Thus, the city is under soil liquefaction risk during a large earthquake. A resistivity survey including 189 vertical electrical sounding (VES) measurements was carried out in 2000 as part of a multi-disciplinary project aiming to investigate settlement properties in Burdur city and its vicinity. In the present study, the VES data acquired by using a Schlumberger array were re-processed with 1D and 2D inversion techniques to determine liquefaction potential in the study site. The results of some 1D interpretations were compared to the data from several wells drilled during the project. Also, the groundwater level map that was previously obtained by hydrological studies was extended toward north by using the resistivity data. 2D least-squares inversions were performed along nine VES profiles. This provided very useful information on vertical and horizontal extends of geologic units and water content in the subsurface. The study area is characterized by low resistivity distribution (<150 Ωm) originating from high fluid content in the subsurface. Lower resistivity (3–30 Ωm) is associated with the Quaternary and the Tertiary lacustrine sediments while relatively high resistivity (40–150 Ωm) is related to the Quaternary alluvial cone deposits. This study has also shown that the resistivity measurements are useful in the estimation of liquefaction risk in a site by providing information on the groundwater level and the fluid content in the subsurface. Based on this, we obtained a liquefaction hazard map for the study area. The liquefaction potential was classified by considering the resistivity distributions from 2D inversion of the VES profiles, the types of the sediments and the extended groundwater level map. According to this map, the study area was characterized by high liquefaction hazard risk.  相似文献   

8.
Electrical imaging of the groundwater aquifer at Banting,Selangor, Malaysia   总被引：1，自引：0，他引：1  
A geophysical study was carried out in the Banting area of Malaysia to delineate groundwater aquifer and marine clay layer of the alluvial Quaternary deposits of Beruas and Gula Formations. The Beruas Formation is formed by peat and clayey materials as well as silt and sands, whereas the Gula Formation consists of clay, silt, sand and gravels. Both Formations were deposited on top of the Carboniferous shale of the Kenny Hill Formation. A 2-D geoelectrical resistivity technique was used. Resistivity measurement was carried out using an ABEM SAS 4000 Terrameter. The 2-D resistivity data of subsurface material for each survey line was calculated through inverse modelling and then compared with borehole data. The resistivity images of all the subsurface material below the survey lines show similar pattern of continuous structure of layering or layers with some lenses with resistivity ranging from 0.1 to 50 Ωm. The upper layer shows resistivity values ranging from 0.1 to 10 Ωm, representing a clay horizon with a thickness up to 45 m. The second layer with depth varies from 45 to 70 m below surface and has resistivity values ranging from 10 to 30 Ωm. Borehole data indicate coarse sand with some gravels for this layer, which is also the groundwater aquifer in the study area. The lowermost layer at a depth of 70 m below ground level shows resistivity values ranging from 30–50 Ωm and can be correlated with metasedimentary rocks consisting of shale and metaquartzite.  相似文献   

9.
Rise of groundwater level becomes an emerging concern at Wonji irrigation field, Main Ethiopian Rift. An integrated study based on geophysical resistivity methods is conducted at Wonji wetland to understand the link between irrigation water and the shallow aquifer system as well as to confirm the current concern of groundwater rise. The study was also intended to improve the uncertainty of understanding the hydrogeology of Wonji wetland including the extent and direction of groundwater–surface water interaction. The vertical and horizontal contacts between the different geological series of the Wonji area are resolved with 2D high-resolution geophysical imaging. Results from both VES and 2D tomography show low resistivity layers under Wonji irrigation field with narrow ranges in resistivity variation which corresponds to a homogeneous saturated layer. The geoelectric sections reveal two fault systems running NW–SE and N–S directions which impede lateral groundwater flow. Furthermore, groundwater is converged towards the Wonji irrigation site strained by these fault systems. The geophysical results show strong link between irrigation water and the shallow unconfined aquifer as well as among the local and regional flow systems.  相似文献   

10.
We apply Fourier and wavelet analyses to the precipitation and sunspot numbers in the time series (1901–2000) over Australia (27°S, 133°E), Canada (60°N, 95°W), Ethiopia (8°N, 38°E), Greenland (72°N, 40°W), United Kingdom (54°N, 2°W), India (20°N, 77°E), Iceland (65°N, 18°W), Japan (36°N, 138°E), United States (38°N, 97°W), South Africa (29°S, 24°E) and Russia (60°N, 100°E). Correlation analyses were also performed to find any relation among precipitation, sunspot numbers, temperature, and cloud-cover at the same spatial and temporal scale. Further correlations were also performed between precipitation with electron and proton fluence at the time interval, 1987–2006. All these parameters were considered in annual and seasonal scales. Though correlation study between precipitation and other parameters do not hint any linear relation, still the Fourier and wavelet analyses give an idea of common periodicities. The 9–11 year periodicity of sunspot numbers calculated by Fourier transform is also confirmed by wavelet transform in annual scale. Similarly, wavelet analysis for precipitation also supports the short periods at 2–5 years which is verified by Fourier transform in discontinuous time over different geographic regions.  相似文献   

11.
A temperature–time path was constructed for high-temperature low-pressure (HT–LP) migmatites of the Bayerische Wald, internal zone of the Variscan belt, Germany. The migmatites are characterised by prograde biotite dehydration melting, peak metamorphic conditions of approximately 850 °C and 0.5–0.7 GPa and retrograde melt crystallisation at 800 °C. The time-calibration of the pressure–temperature path is based on U–Pb dating of single zircon and monazite grains and titanite separates, on 40Ar/39Ar ages obtained by incremental heating experiments on hornblende separates, single grains of biotite and K-feldspar, and on 40Ar/39Ar spot fusion ages of biotite determined in situ from sample sections. Additionally, crude estimates of the duration of peak metamorphism were derived from garnet zoning patterns, suggesting that peak temperatures of 850 °C cannot have prevailed much longer than 2.5 Ma. The temperature–time paths obtained for two areas approximately 30 km apart do not differ from each other considerably. U–Pb zircon ages reflect crystallisation from melt at 850–800 °C at 323 Ma (southeastern area) and 326 Ma (northwestern area). The U–Pb ages of monazite mainly coincide with those from zircon but are complicated by variable degrees of inheritance. The preservation of inherited monazite and the presence of excess 206Pb resulting from the incorporation of excess 230Th in monazite formed during HT–LP metamorphism suggest that monazite ages in the migmatites of the Bayerische Wald reflect crystallisation from melt at 850–800 °C and persistence of older grains at these temperatures during a comparatively short thermal peak. The U–Pb ages of titanite (321 Ma) and 40Ar/39Ar ages of hornblende (322–316 Ma) and biotite (313–309 Ma) reflect cooling through the respective closure temperatures of approximately 700, 570–500 and 345–310 °C published in the literature. Most of the feldspars' ages (305–296 Ma) probably record cooling below 150–300 °C, while two grains most likely have higher closure temperatures. The temperature–time paths are characterised by a short thermal peak, by moderate average cooling rates and by a decrease in cooling rates from 100 °C/my at temperatures between 850–800 and 700 °C to 11–16 °C/my at temperatures down to 345–310 °C. Further cooling to feldspar closure for Ar was probably even slower. The lack of decompressional features, the moderate average cooling rates and the decline of cooling rates with time are not easily reconciled with a model of asthenospheric heating, rapid uplift and extension due to lithospheric delamination as proposed elsewhere. Instead, the high peak temperatures at comparatively shallow crustal levels along with the short thermal peak require external advective heating by hot mafic or ultramafic material. Received: 7 July 1999 / Accepted: 28 October 1999  相似文献   

12.
 The Cross River State, Nigeria, is underlain by the Precambrian-age crystalline basement complex and by rocks of Cretaceous to Tertiary age. The exploration for groundwater in this area requires a systematic technique in order to obtain optimum results, but the non-availability of funds and facilities has made it extremely difficult to carry out site investigations prior to the drilling of water wells. Therefore, the failure rate is as high as 80%. In order to delineate areas that are expected to be suitable for future groundwater development, black and white radar imagery and aerial photographs were used to define some hydrological and hydrogeological features in parts of the study area. Lineament and drainage patterns were analysed using length density and frequency. Lineament-length density ranges from 0.04–1.52; lineament frequency is 0.11–5.09; drainage-length density is 0.17–0.94, and the drainage frequency is 0.16–1.53. These range of values reflect the differences in the probability of groundwater potentials. Results were then used to delineate areas of high, medium, and low groundwater potential. Study results also indicate that correlations exist between lineament and drainage patterns, lithology, water temperature, water conductivity, well yield, transmissivity, longitudinal conductance, and the occurrence of groundwater. Received, August 1994 · Revised, March 1996, June 1996 · Accepted, October 1996  相似文献   

13.
 A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming. Received, May 1997 · Revised, February 1998 · Accepted, April 1998  相似文献   

14.
A geophysical survey was undertaken at Wiri area of the Andong in southeastern Korea to delineate subsurface structure and to detect the fault zone, which affected the 1997 mountain–hill subsidence and subsequent road heaving initiated by the intense rainfall. Electrical resistivity methods of dipole–dipole array profiling and Schlumberger array sounding and seismic methods of refraction and reflection profiling were used to map a clay zone, which was regarded as the major factor for the landslide. The clay zone was identified in electrical resistivity and seismic sections as having low electrical resistivity (<100 Ωm) and low seismic velocity (<400 m/s), respectively. The clay zone detected by using geophysical methods is well correlated with its distribution from the trench and drill-core data. The results of the electrical and seismic surveys showed that slope subsidence was associated with the sliding of saturated clay along a fault plane trending NNW–SSE and dipping 10°–20° SW. However, the road heaving was caused by the slope movement of the saturated clay along a sub-vertical NNE-trending fault.  相似文献   

15.
Sapphirine-bearing orthopyroxene-kyanite (Opx-Ky) and -sillimanite (Opx-Sil) granulites have been found in the Lewisian complex of South Harris in northwest Scotland. In the Opx-Ky granulites, orthopyroxene and kyanite are intergrown in a stable mineral assemblage, which indicates metamorphic condition at 800–900 °C >12 kbar. Sillimanite inclusions within orthopyroxene suggest that sillimanite formed earlier; conditions are estimated at 950 ± 30 °C at 10 kbar from orthopyroxene isopleths for aluminous orthopyroxene (<9.7 wt%). In the Opx-Sil granulite, the orthopyroxene + sillimanite + garnet + sapphirine assemblage is stable at the peak metamorphic stages, indicating P-T condition of 930–950 °C, >8 kbar according to the FMAS petrogenetic grid, and similar conditions were obtained by using orthopyroxene-garnet geothermobarometers. The two types of orthopyroxene-aluminosilicate granulites indicate that the peak metamorphic conditions were over 900 °C, compatible with ultra-high temperature metamorphism. As accessory sapphirine occurs in several assemblages and with different compositions; it is interpreted to be formed at different stages of the metamorphism. These granulites were formed during Early Proterozoic high-grade metamorphism due to the emplacement of the South Harris Igneous Complex at c. 2170–1870 Ma, and are not related to the major metamorphic episode of the Badcallian/Inverian metamorphism at c. 2700–2500 Ma in the mainland Lewisian. Received: 17 July 1998 / Accepted 8 March 1999  相似文献   

16.
Summary The Cu–Fe–Au–Mo (W) deposits in southeastern Hubei are an important component of the Middle–Lower Yangtze River metallogenic belt. Molybdenite from the Fengshandong Cu- (Mo), Ruanjiawan W–Cu- (Mo), Qianjiawan Cu–Au, Tongshankou Cu–Mo and Tonglüshan Cu- (Fe) deposits yielded Re–Os ages of 144.0 ± 2.1 Ma, 143.6 ± 1.7 Ma, 137.7 ± 1.7 Ma, 142.3 ± 1.8–143.7 ± 1.8 Ma and 137.8 ± 1.7–138.1 ± 1.8 Ma, respectively. Phlogopite from the Tieshan Fe- (Cu) deposit yielded an Ar–Ar age of 140.9 ± 1.2 Ma. These data and other published isotopic ages (Re–Os molybdenite and Ar–Ar mica ages) for the Cu–Fe–Au–Mo (W) deposits in the Middle–Lower Yangtze River metallogenic belt show that Cu–Fe–Au–Mo (W) mineralisation in the Tongling, Anqing, Jiurui and Edong ore districts developed in a narrow time span between 135.5 and 144.9 Ma, reflecting an important regional metallogenic event. An integrated study of available petrological and geochronological data, together with relationships to magmatism and the regional geodynamic framework, indicate that the Cu–Fe–Au–Mo (W) mineralisation in the Middle–Lower Yangtze River belt occurred during a regime of lithospheric extension. This extension is probably related to Late Mesozoic processes of lower crustal delamination and lithospheric thinning in East China.  相似文献   

17.
 To accurately measure the pH, Eh, EC and temperature of groundwater retrieved from boreholes, a deep groundwater sampling apparatus was developed which provided sensory measurements both in situ and in a flow-through cell at ground level. Under a pressure of 1×106 Pa the in situ accuracy of the apparatus sensor was within the following limits: pH ±0.2, temperature ±0.1°C, Eh ±10 mV, and EC ±2.4%. The measuring and sampling of deep groundwater from a borehole of more than 1000 m in depth was performed continuously for 30 days. Values of pH were the same for the in situ sensor, the flow-through cell sensor and the laboratory measurements of the sampled water. At the beginning of the sampling period, Eh values of the in situ sensor indicated deep groundwater conditions. The apparatus is particularly useful for Eh measurement. Chemical composition and stable isotope ratios indicated that the groundwater sampled from more than 1000 m depth was a connate water with a chemical composition slightly different from seawater of the present time, and the groundwater retrieved from 800 m depth was a meteoric water. Natural radioactive elements are thought to be the origin of the tritium in the groundwater retrieved from the 1000 m depth. Received: 6 August 1996 / Accepted: 22 October 1996  相似文献   

18.
We report an extensive field-based study of zircon and monazite in the metamorphic sequence of the Reynolds Range (central Australia), where greenschist- to granulite-facies metamorphism is recorded over a continuous crustal section. Detailed cathodoluminescence and back-scattered electron imaging, supported by SHRIMP U–Pb dating, has revealed the different behaviours of zircon and monazite during metamorphism. Monazite first recorded regional metamorphic ages (1576 ± 5 Ma), at amphibolite-facies grade, at ∼600 °C. Abundant monazite yielding similar ages (1557 ± 2 to 1585 ± 3 Ma) is found at granulite-facies conditions in both partial melt segregations and restites. New zircon growth occurred between 1562 ± 4 and 1587 ± 4 Ma, but, in contrast to monazite, is only recorded in granulite-facies rocks where melt was present (≥700 °C). New zircon appears to form at the expense of pre-existing detrital and inherited cores, which are partly resorbed. The amount of metamorphic growth in both accessory minerals increases with temperature and metamorphic grade. However, new zircon growth is influenced by rock composition and driven by partial melting, factors that appear to have little effect on the formation of metamorphic monazite. The growth of these accessory phases in response to metamorphism extends over the 30 Ma period of melt crystallisation (1557–1587 Ma) in a stable high geothermal regime. Rare earth element patterns of zircon overgrowths in leucosome and restite indicate that, during the protracted metamorphism, melt-restite equilibrium was reached. Even in the extreme conditions of long-lasting high temperature (750–800 °C) metamorphism, Pb inheritance is widely preserved in the detrital zircon cores. A trace of inheritance is found in monazite, indicating that the closure temperature of the U–Pb system in relatively large monazite crystals can exceed 750–800 °C. Received: 7 April 2000 / Accepted: 12 August 2000  相似文献   

19.
Both stratiform/stratabound and granite-related models have been used to explain the genesis of W(Mo) deposits in the Okiep copper district in western Namaqualand, South Africa. Apparently, stratabound mineralization (Fe-rich wolframite with accessory molybdenite) occurs in foliation-parallel quartz veins in high-grade (∼750 °C, 5–6 kbar) metapelites of the Wolfram Formation, and less commonly in small bodies of silicified leucogranites and pegmatites. Six Re–Os ages for molybdenites from four deposits (Nababeep Tungsten Far West, Kliphoog, Narrap, Tweedam) range between 1000 ± 4 and 1026 ± 5 Ma. These molybdenites define a well-constrained 187Re–187Os isochron with an age of 1019 ± 6 Ma, which is interpreted as the age of W(Mo) mineralization. This age is significantly younger than Proterozoic protolith ages for supracrustal rocks and the emplacement ages for the main intrusive suites, but geologic evidence requires overlap with a period of high-grade metamorphism. We suggest that W(Mo) mineralization is genetically linked to intra-crustal magmatic processes at ∼1020 Ma, thereby precluding the ∼1060 Ma Concordia granite as the source for mineralizing fluids. A narrow range of positive δ34S compositions (+3.6 to +4.5‰) for eight molybdenites from five W(Mo) mines is consistent with a SO2-rich fluid and a granite-related genetic model. Post-peak metamorphic deformation and metamorphism of W(Mo) ores is most likely related to the retrograde stage of the Namaquan orogeny, which overlaps emplacement of late-orogenic, evolved granites and pegmatites, and the formation of W(Mo) deposits in western Namaqualand. Therefore, the effects of retrograde Namaquan metamorphism extend at least to ∼1020 Ma or, alternatively, these W(Mo) veins were affected by a poorly constrained later event (e.g. early Pan-African). Received: 12 September 1999 / Accepted: 20 April 2000  相似文献   

20.
The effect of the Ruseifa municipal landfill on the shallow groundwater aquifers in the area was investigated in two separate sites. The first one was not used since 1994, whereas the other is still being used for dumping. Fourteen electrical resistivity soundings were performed to detect the leachate and its effect on the quality of the groundwater. Results indicated that the solid waste thickness of the landfill was ranged from 3 to 20 m with resistivity value less than 10 Ω m. Based on the resistivity decreases of values less than 5 Ω m, the leachate was detected in the landfill sites at depths ranged from 10 to 50 m. However, the flow direction of the leachate at depth ranging 10–20 m in the terminated site was toward north, whereas the flow direction of the leachate in the site still used for dumping was toward east–northeast which causes the major source of groundwater pollution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号