首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 26 毫秒
1.
Historic structures can be viewed as exposure trials of the stone of which they are constructed. As such, they represent a geomorphological weathering experiment. Several structures of Henrician (sixteenth century) and greater age on the coast of southwest England have been exposed to coastal salt weathering for 500–600 years. Long‐term weathering rates on five different rock groups are derived from careful study of weathering depths and forms. There is significant variation in weathering rate between five major rock groups. Rank ordering of weathering rate values reveals a durability order of these rock groups, which is confirmed by local juxtapositions. Controls on rock durability in the coastal weathering environment include both mechanical and mineralogical characteristics. Specific density, and combined quartz and muscovite content, are positively related to durability; high feldspar and chlorite content are associated with low durability. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

2.
Cavernous weathering (tafoni development) occurs on coastal slopes in greenschist bedrock at elevations up to 40 m above sea level. The freshly weathered surfaces of the cavern interiors are irregular in morphology, discordant to major rock structure, formed by substantially weakened rock and associated with granular weathering debris. The weathering debris contains soluble elements in proportions similar to those present in seawater, and the penetration of elements associated with sea salts into the weathering surface to estimated depths of at least 0·1–0·2 m is indicated by the presence of chlorine. Scanning electron microscopy and microprobe analyses suggest that rock breakdown occurs principally through limited chemical weathering at grain boundaries. The mechanism for the emplacement of marine salts within sheltered rock surfaces in the tafoni is postulated to be a combination of dry deposition under turbulent atmospheric conditions and wetting by coastal fog.  相似文献   

3.
Weathering rates were calculated using the height differences between lead lettering on marble gravestones from inland urban, inland rural, coastal urban and coastal rural sites within southern Britain. All sites exhibit similar amounts and variations in rainfall over the study period for which gravestone measurements are available. Comparison of mean weathering rates suggested that the coastal urban site of Clacton had a similar weathering rate to the nearby coastal rural site. The other urban sites of Oxford, Lodge Hill and Portsmouth had similar weathering rates, despite their diverse locations and histories. The inland rural site had a significantly lower mean weathering rate than any other site. Analysis of covariance confirms that there are similarities between some sites. Linear and curvilinear regression of depth of loss against age suggests that a linear regression adequately describes the relationship over the period for which data are available, although there are problems with this simple interpretation. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

4.
Cavernous tafoni‐type weathering is a common and conspicuous global feature, creating artistic sculptures, which may be relevant for geochemical budgets. Weathering processes and rates are still a matter of discussion. Field evidence in the type locality Corsica revealed no trend of size variability from the coast to subalpine elevations and the aspect of tafoni seems to be governed primarily by the directions of local fault systems and cleavage, and only subordinately by wind directions or the aspect of insulation. REM analysis of fresh tafone chips confirmed mechanical weathering by the crystallization of salts, as conchoidal fracturing of quartz is observed. The salts are only subordinately provided by sea spray, as calcium and sodium sulfates rather than halite dominate even close to the coast. Characteristic element ratios compare well with aerosols from mixed African and European air masses. Sulfates are largely derived from Sahara dust, indicated by their sulfur isotopic composition. Salt crystals form by capillary rise within the rock and subsequent crystallization in micro‐cracks and at grain boundaries inside rain‐protected overhangs. Siderophile bacteria identified by raster electron microscopy (REM) analysis of tafone debris contribute to accelerated weathering of biotite and tiny sulfide ore minerals. By applying 10Be‐exposure dating, weathering rates of large mature tafone structures were found to be about an order of magnitude higher than those on the exposed top of the affected granite blocks. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
Honeycomb weathering occurs in two environments in Late Cretaceous and Eocene sandstone outcrops along the coastlines of south‐west Oregon and north‐west Washington, USA, and south‐west British Columbia, Canada. At these sites honeycomb weathering is found on subhorizontal rock surfaces in the intertidal zone, and on steep faces in the salt spray zone above the mean high tide level. In both environments, cavity development is initiated by salt weathering. In the intertidal zone, cavity shapes and sizes are primarily controlled by wetting/drying cycles, and the rate of development greatly diminishes when cavities reach a critical size where the amount of seawater left by receding tides is so great that evaporation no longer produces saturated solutions. Encrustations of algae or barnacles may also inhibit cavity enlargement. In the supratidal spray zone, honeycomb weathering results from a dynamic balance between the corrosive action of salt and the protective effects of endolithic microbes. Subtle environmental shifts may cause honeycomb cavity patterns to continue to develop, to become stable, or to coalesce to produce a barren surface. Cavity patterns produced by complex interactions between inorganic processes and biologic activity provide a geological model of ‘self‐organization’. Surface hardening is not a factor in honeycomb formation at these study sites. Salt weathering in coastal environments is an intermittently active process that requires particular wind and tidal conditions to provide a supply of salt water, and temperature and humidity conditions that cause evaporation. Under these conditions, salt residues may be detectable in honeycomb‐weathered rock, but absent at other times. Honeycomb weathering can form in only a few decades, but erosion rates are retarded in areas of the rock that contain cavity patterns relative to adjacent non‐honeycombed surfaces. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
This paper presents measured rates of erosion on shore platforms at Kaikoura Peninsula, South Island, New Zealand. Surface lowering rates were measured with a micro-erosion meter and traversing micro-erosion meter. The mean lowering rate for all shore platforms was 1·130 mm a−1. Differences in lowering rates were found between different platform types and lithologies. The rate of surface lowering on Type A (sloping) mudstone platforms was 1·983 mm a−1, and 0·733 mm a−1 on Type B mudstone platforms (subhorizontal). On limestone platforms the lowering rate was 0·875 mm a−1. A previously reported cross-shore pattern of surface lowering rates from Kaikoura was not found. Rates were generally higher on the landward margins and decreased in a seaward direction. Season is shown statistically to influence erosion rates, with higher rates during summer than winter. The interpretation given to this is that the erosive process is subaerial weathering in the form of wetting and drying and salt weathering. This is contrary to views of shore platform development that have favoured marine processes over subaerial weathering. Copyright © 1998 John Wiley & Sons, Ltd.  相似文献   

7.
Differences in chemical weathering extent and character are expected to exist across topographic escarpments due to spatial gradients of climatic and/or tectonic forcing. The passive margin escarpment of south‐eastern Australia has a debated but generally accepted model of propagation in which it retreated (within 40 Ma) to near its current position following rifting between Australia and New Zealand 85–100 Ma before present. We focus on this escarpment to quantify chemical weathering rates and processes and how they may provide insight into scarp evolution and retreat. We compare chemical weathering extents and rates above and below the escarpment using a mass balance approach coupling major and trace element analyses with previous measurements of denudation rates using cosmogenic nuclides (10Be and 26Al). We find a slight gradient in saprolite chemical weathering rate as a percentage of total weathering rate across the escarpment. The lowlands area, encompassing the region extending from the base of the escarpment to the coast, experiences a greater extent of chemical weathering than the highland region above the escarpment. Percents of denudation attributable to saprolite weathering average 57 ± 6% and 47 ± 7% at low and high sites respectively. Furthermore, the chemical index of alteration (CIA), a ratio of immobile to mobile oxides in granitic material that increases with weathering extent, have corresponding average values of 73·7 ± 3·9 and 65·5 ± 3·4, indicating lower extents of weathering above the escarpment. Finally, we quantify variations in the rates and extent of chemical weathering at the hillslope scale across the escarpment to suggest new insight into how climate differences and hillslope topography help drive landscape evolution, potentially overprinting longer term tectonic forcing. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

8.
Landscapes evolve in response to external forces, such as tectonics and climate, that influence surface processes of erosion and weathering. Internal feedbacks between erosion and weathering also play an integral role in regulating the landscapes response. Our understanding of these internal and external feedbacks is limited to a handful of field‐based studies, only a few of which have explicitly examined saprolite weathering. Here, we report rates of erosion and weathering in saprolite and soil to quantify how climate influences denudation, by focusing on an elevation transect in the western Sierra Nevada Mountains, California. We use an adapted mass balance approach and couple soil‐production rates from the cosmogenic radionuclide (CRN) 10Be with zirconium concentrations in rock, saprolite and soil. Our approach includes deep saprolite weathering and suggests that previous studies may have underestimated denudation rates across similar landscapes. Along the studied climate gradient, chemical weathering rates peak at middle elevations (1200–2000 m), averaging 112·3 ± 9·7 t km–2 y–1 compared to high and low elevation sites (46·8 ± 5·2 t km?2 y?1). Measured weathering rates follow similar patterns with climate as those of predicted silica fluxes, modeled using an Arrhenius temperature relationship and a linear relationship between flux and precipitation. Furthermore, chemical weathering and erosion are tightly correlated across our sites, and physical erosion rates increase with both saprolite weathering rates and intensity. Unexpectedly, saprolite and soil weathering intensities are inversely related, such that more weathered saprolites are overlain by weakly weathered soils. These data quantify exciting links between climate, weathering and erosion, and together suggest that climate controls chemical weathering via temperature and moisture control on chemical reaction rates. Our results also suggest that saprolite weathering reduces bedrock coherence, leading to faster rates of soil transport that, in turn, decrease material residence times in the soil column and limit soil weathering. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

9.
Weathering rinds, zones of alteration on the exterior surfaces of rock outcrops and coarse unconsolidated surficial debris are widely used by geomorphologists and Quaternary geologists as indicators of the relative age of landforms and landscapes. Additionally they provide unique insights into the earliest stages of rock and mineral weathering, yet the origin of these alteration zones is relatively poorly understood. This lack of understanding applies especially to the initial stages of rind formation. The study reported in this paper has two principal objectives. The first is to use lightly polished granite discs inserted in soil profiles under several different plant communities in an Arctic alpine environment for a period of four or five years to investigate the nature of incipient weathering rind development. The second is to investigate the factors responsible for spatial variability in the nature and rates of rind formation. Incipient weathering rind development on the outer edges of the granite discs is observable and measurable over a period of time as short as four years in the mild Arctic alpine environment of Swedish Lapland. The earliest stages of rind development involve the development of a porous structure consisting of a combination of pits and fractures which have been solutionally enlarged and modified. Solution appears to be preferentially concentrated on the surfaces of feldspars and, to a lesser extent, quartz. In addition, iron oxides are present along grain boundaries and in grain interiors and are interpreted to have been derived from the oxidation of ferromagnesian minerals. Spatial variability in weathering rind development appears to be particularly driven by differences in moisture but is not related to soil pH. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

10.
Determining the rates of rock weathering is difficult because, firstly, the weathering rate of rocks is usually so slow that it is difficult to measure; secondly, it is also difficult to determine the start time and duration of weathering. The Shanxi River Valley in Fujian, China dried up after a reservoir was built upstream in 1959, and became a stone quarry site. Quarrying ceased in 1977, so a large amount of quarry wastes with artificially excavated surfaces were left in the valley. The concave-upward curved rocky surface, broken by manual excavation, easily contains rainwater in its central part, which was easily weathered into a more concave surface. Plaster mould casting was performed in situ on such a concave surface of an excavated stone rock in the valley and scanned with a high-precision 3D scanner to obtain 3D data of the concave-upward rock surface and its more concave middle part, which was considered as an initial weathering pit. The 3D model provided an in-depth understanding of the initial formation process of weathering pits, indicating that: (1) the average weathering rate of a weathering pit is 10.8 ± 0.49 cm ka−1; (2) weathering pits are generally formed by standing water in depressions on a flat near-horizontal rock surface due to weathering actions involving water; (3) the deepening rate of a weathering pit is about four times greater than that of the surrounding area; (4) the growth of a weathering pit can begin in some small concavities on the flat rock surface without pre-existing depressions and gradually expands; (5) a weathering pit is generally wider than deep or with a flat bottom due to expansion with a lateral weathering rate that is greater than that of the vertical, and the lamination of the host rock is not necessary for the formation of flat-floored weathering pits. © 2020 John Wiley & Sons, Ltd.  相似文献   

11.
Tafoni are a type of cavernous weathering widespread around the world. Despite the extensive distribution of the tafoni, their genesis is not clear and is still a matter of debate, also because they occur in such different climatic conditions and on so many different types of substrate. Geomorphological characterization of more than 60 tafoni in three different Antarctic sites (two coastal and one inland) between 74 and 76° S with sampling of weathering products and salt occurrences are described together with thermal data (on different surfaces) and wind speed recorded in different periods of the year in a selected tafone close to the Italian Antarctic station. The aim of this present study is to provide further information to help understand the processes involved in the growth of tafoni in a cryotic environment, and the relationship of these processes to climate, with particular attention to the thermal regime and the role of wind. The new data presented in this paper suggest that there is no single key factor that drives the tafoni development, although thermal stress seems the most efficient process, particularly if we consider the short‐term fluctuations. The data also confirm that other thermal processes, such as freezing–thawing cycles and thermal shock, are not really effective for the development of tafoni in this area. The wind speed measured within the tafoni is half that recorded outside, thus favouring snow accumulation within the tafoni and therefore promoting salt crystallization. On the other hand, the wind effect on the thermal regime within the tafoni seems negligible. While both salt weathering and thermal stress appear active in this cryotic environment, these are azonal processes and are therefore active in other climatic areas where tafoni are widespread (such as the Mediterranean region). Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
40Ar/39Ar laser incremental‐heating analyses of 22 individual grains of supergene cryptomelane from three weathering pro?les, up to 400 km apart, in the Rio Doce valley and Barbacena regions at Minas Gerais, Brazil, show that the formation of weathering pro?les in these regions is contemporaneous, suggesting a strong weathering event in the Middle to Late Miocene (10–8 Ma). The preservation of these Miocene samples at or near the present surface suggests that either erosion rates have been very low in the region since the Miocene or that a much thicker weathering mantle was present in the region originally. Assuming a constant thickness of weathering pro?les in the region throughout the Tertiary, we may calculate weathering front propagation rates of 4–8 m Myr?1 during the past 10 Ma. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

13.
Weathering features are described from an arid coastal area in northern Morocco which are indicative of invasive chasmolithic and endolithic microbial communities. Active weathering of marine terraces and karst development is associated with endolithic and epilithic algae responsible for boring, disintegration of matrix and mineral fabrics, solution and biomineralization that undermines the marine carbonate platform. Evidence of a range of biological weathering agents remains preserved, speci?cally calci?ed ?laments and sporangial material. An abundance of ?laments and spores representative of a consortium of algae, fungi, cyanobacteria and lichens is associated with the most denuded outcrops. The array of microbes contributes to the formation of the stromatolites to depths of 0·5 m within the limestone substrate. The preservation of stromatolites is supported by calci?cation of spores and ?laments, with trapping and binding of carbonate held in suspension by vadose waters. The pervasive weathering on this sector of coastline has important practical implications for coastal planning and development authorities in Morocco. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

14.
A wide range of sedimentological and geomorphological field research depends on the availability of accurate and detailed depositional age models. Although exposure dating techniques such as cosmogenic nuclide and luminescence dating are now widely available, they remain expensive and time‐consuming, and this frequently limits the density of age constraints and the resolutions of age models for many study areas. We present a simple and effective, field‐based approach for extending and correlating existing age models to un‐dated surfaces. In Owens Valley, California, we make use of detailed beryllium‐10 (10Be) chronologies reported for four different alluvial fan systems, to precisely calibrate the rate at which weathering fractures are enlarged in granitic surface boulders. We show that these fractures have widened at a time‐integrated rate of 1.05 ± 0.03 mm ka?1 for at least 140 ka at this location, and this relationship can be represented by a linear regression that makes them ideal chronometers for surface dating. Our analysis offers a new approach to refining the uncertainties of both surface erosion rate and cosmogenic age estimates at this location. Ultimately, we integrate our observations to devise a robust age calibration for clast fracture widths in Owens Valley, and we demonstrate its application by estimating the ages of 27 additional local fan surfaces. We present an updated and extended stratigraphy for eight Sierra Nevada fan systems in total, with exceptional age control. This novel approach to dating sedimentary surfaces is inexpensive and easily applied in the field, and has the potential to significantly increase the temporal and spatial density of age constraints available for a particular study area. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

15.
Scanning electron microscopy reveals that Lecidea auriculata penetrates rock surfaces, detaching, incorporating and expelling flakes of rock. Measurements on an age sequence of moraine ridges illustrate changes in the extent and intensity of weathering over time. A minimum rate of surface lowering (0·0012 mm a?1) is 25 to 50 times faster than weathering due to other processes in the same area. The spatial pattern of weathering is influenced by the narrow ecological range of the species. Surface rocks on dry, exposed sites are probably weathering much more rapidly than those in adjacent damp hollows and beneath snowpatches.  相似文献   

16.
The initial stages of cobble weathering, measured as increasing percentage porosity, were calculated for sets of cobbles taken from the foreland of Storbreen, a cirque glacier in the Jotunheimen, Norway. Cobbles were taken from in front of the 1998 glacier snout, from the 1928, 1870, 1810 and 1750 moraine crests and from the ～10 000‐year‐old land surface beyond the Neoglacial foreland limit. Three microenvironments were examined within each site: (1) lichen‐free surfaces from exposed cobbles, (2) lichen‐covered surfaces from exposed cobbles and (3) buried cobbles taken from a soil depth of ～40 cm. Percentage porosity within plagioclase minerals was calculated using backscatter electron images of prepared thin sections. Porosity was calculated from five depth profiles into each cobble. Depth profiles were subdivided into a sequence of 50 µm × 50 µm rectangles running to at least a nominal depth of 500 µm within each cobble. Three cobbles from each dated land surface were sampled, except for the 1750 surface, which had five cobbles. Statistical analysis was by analysis of variance of rank‐order transformed data. Findings indicate that cobbles close to the glacier snout are largely unweathered; also, weathering is generally weak in the 1928, 1870 and 1810 positions, but statistically significantly higher in the 1750‐ and 10 000‐year‐old positions. Weathering of buried cobbles always exceeded weathering of exposed cobbles and may possibly reach a value beyond which it cannot progress while retaining surface cohesion. The degree of weathering on lichen‐free and lichen‐covered cobble surfaces is not initially distinguishable, but diverges sharply after ～250 years, when lichen‐covered surfaces experience significantly higher totals. Overall, the weathering trend in cobbles matches that found in soils at the same sites. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
The Hawaiian Islands permit investigation of tropical chemical weathering rates and processes on a single rock type, basalt. Chronosequences are investigated as a function of rainfall due to the varying age of each island, including Kauai (~4 Ma), Oahu (~2 Ma), and Hawaii's Kohala Peninsula (~0.3 to 0.17 Ma). Understanding tropical critical zone (CZ) development is vital given the large populations in developing countries that rely on it. HVSR (horizontal-to-vertical spectral ratio) seismic soundings on Kauai indicate that ~60% of the variability in laterite thickness is due to gradients in precipitation, with errors in erosion corrections and variability in the original permeability structure of the volcanic sequence playing important roles. Basalts have higher horizontal than vertical hydraulic conductivity (Kh > Kv) , and local variability in likely drives much of the remaining differences in laterite thickness. HVSR is well suited for estimating laterite thickness as it has been shown to reliably detect the base of the weathering profile, is rapid (20 min/sounding), highly portable, and occupies a very small footprint. Comparison of Kauai and Oahu weathering profiles suggests that the Oahu laterites are fully or nearly fully formed, despite being half the age of Kauai. By contrast, the young laterites on Kohala (~170 to ~300 ka) exhibit greatly contrasting thicknesses, where coastal laterites are thick and interior laterites are thin, suggesting that early weathering on shield volcanoes produces wedge-shaped laterites near the coast. With time, the thick (coastal) end of the wedge propagates upslope such that a fully developed, constant-thickness laterite carapace can form in ~2 Ma or less. The development of thickened coastal laterites on young substrates depends on greater water–rock ratios as vertically infiltrating water upslope is diverted laterally. This view of laterite development is very different compared to endmember models of continental weathering and CZ development. © 2020 John Wiley & Sons, Ltd.  相似文献   

18.
Dissolved major ions, Sr concentrations and 87Sr/86Sr ratios of 10 coastal lakes from the Larsemann Hills, East Antarctica have been studied to constrain their solute sources, transport and glacial weathering patterns in their catchments. In absence of perennial river/streams, lakes serve as only reliable archive to study land surface processes in these low-temperature regions. The lake water chemistry is mostly Na-Cl type and it does not show any significant depth variations. Sr isotope compositions of these lakes vary from 0.7110 to 0.7211 with an average value of 0.7145, which is higher than modern seawater value. In addition to oceanic sources, major ions and Sr isotopic data show appreciable amount of solute supply from chemical weathering of silicate rocks in lake catchments and dissolution of Ca-Mg rich salts produced during the freezing of seawaters. The role of sulphide oxidation and carbonate weathering are found to be minimal on lake hydro-chemistry in this part of Antarctica. Inverse model calculations using this chemical dataset provide first-order estimates of dissolved cations and Sr; they are mostly derived from oceanic (seawater + snow) sources (cations approximately 76%) and (Sr approximately 92%) with minimal supplies from weathering of silicates (cations approximately 15%); (Sr approximately 2%) and Ca-rich minerals (cations approximately 9%); (Sr approximately 7%). The silicate weathering rate and its corresponding atmospheric CO2 consumption rate estimates for Scandrett lake catchment (3.6 ± 0.3 tons/km2/year and 0.5 × 105 moles/km2/year), are lower than that of reported values for the average global river basins (5.4 tons/km2/year and 0.9 × 105 tons/km2/year) respectively. The present study provides a comprehensive report of chemical weathering intensity and its role in atmospheric CO2 consumption in low-temperature pristine environment of Antarctica. These estimates underscore the importance of Antarctica weathering on atmospheric CO2 budget, particularly during the past warmer periods when the large area was exposed and available for intense chemical weathering.  相似文献   

19.
Mineral weathering rates and a forest macronutrient uptake stoichiometry were determined for the forested, metabasaltic Hauver Branch watershed in north‐central Maryland, USA. Previous studies of Hauver Branch have had an insufficient number of analytes to permit determination of rates of all the minerals involved in chemical weathering, including biomass. More equations in the mass‐balance matrix were added using existing mineralogic information. The stoichiometry of a deciduous biomass term was determined using multi‐year weekly to biweekly stream‐water chemistry for a nearby watershed, which drains relatively unreactive quartzite bedrock. At Hauver Branch, calcite hosts ~38 mol% of the calcium ion (Ca2+) contained in weathering minerals, but its weathering provides ~90% of the stream water Ca2+. This occurs in a landscape with a regolith residence time of more than several Ka (kiloannum). Previous studies indicate that such old regolith does not typically contain dissolving calcite that affects stream Ca2+/Na+ ratios. The relatively high calcite dissolution rate likely reflects dissolution of calcite in fractures of the deep critical zone. Of the carbon dioxide (CO2) consumed by mineral weathering, calcite is responsible for approximately 27%, with the silicate weathering consumption rate far exceeding that of the global average. The chemical weathering of mafic terrains in decaying orogens thus may be capable of influencing global geochemical cycles, and therefore, climate, on geological timescales. Based on carbon‐balance calculations, atmospheric‐derived sulfuric acid is responsible for approximately 22% of the mineral weathering occurring in the watershed. Our results suggest that rising air temperatures, driven by global warming and resulting in higher precipitation, will cause the rate of chemical weathering in the Hauver Branch watershed to increase until a threshold temperature is reached. Beyond the threshold temperature, increased recharge would produce a shallower groundwater table and reduced chemical weathering rates. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

20.
A key issue in the study of the carbon cycle is constraining the stocks and fluxes in and between C‐reservoirs. Among these, the role and importance of fossil organic carbon (FOC) release by weathering of outcropping sedimentary rocks on continental surfaces is still debated and remains poorly constrained. Our work focuses on FOC fluxes due to chemical and mechanical weathering of marls in two experimental watersheds with typical badlands geomorphology (Draix watersheds, Laval and Moulin, Alpes de Haute Provence, France). Organic matter from bedrock, soil litter and riverine particles are characterized by Rock‐Eval 6 pyrolysis. FOC fluxes due to mechanical weathering are then estimated by monitoring the annual particulate solid exports at the outlets of the watersheds (1985–2005 period). FOC fluxes from chemical weathering were calculated using Ca2+ concentrations in dissolved loads (year 2002) to assess the amount of FOC released by the dissolution of the carbonate matrix. Results show that FOC delivery is mainly driven by mechanical weathering, with a yield ranging from 30 to 59 t km‐2 yr‐1 in the Moulin (0.08 km2) and Laval (0.86 km2) catchments, respectively, (1985–2005 average). The release of FOC attributed to chemical weathering was 2.2 to 4.2 t km‐2 for the year 2002. These high FOC fluxes from badlands are similar to those observed in tectonically active mountain catchments. At a regional scale, badland outcropping within the Durance watershed does not exceed 0.25% in area of the Rhône catchment, but could annually deliver 12 000 t yr‐1 of FOC. This flux could correspond to 27% of the total particulate organic carbon (POC) load exported by the Rhône River to the Mediterranean Sea. At a global scale, our findings suggest that erosion of badlands may contribute significantly to the transfer of FOC from continental surfaces to depositional environments. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号