首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (De) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL De estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating.  相似文献   

2.
The Late Quaternary hydroclimatic evolution of lake systems in Mongolia remains unclear. Here we present a record of lake level variations at Orog Nuur in the Valley of Gobi Lakes in southern Mongolia, since the last interglaciation, based on paleo-shoreline dating using quartz optically stimulated luminescence (OSL) and K-feldspar post-infrared infrared stimulated luminescence (pIRIR) signals. Due to feldspar contamination that could not be eliminated, the OSL signals of quartz single-aliquots (SA), except for two Holocene samples, were unsuitable for dating and a double SA regenerative-dose (SAR) protocol was used for the quartz fraction of these two samples. The pIR50IR170 and pIR200IR290 signals of K-feldspar SA were used to date Holocene samples and old samples (>100 ka), respectively, with the SAR protocol. To determine the bleaching condition of the pIR200IR290 signals, the first pIRIR dating of K-feldspar single-grains of lake shoreline sediments in Mongolia was performed. The equivalent doses of K-feldspar grains show normal distributions, suggesting that the pIR200IR290 signals are well-bleached. Overall, the results, combined with those of previous studies, show that a mega-lake developed at 56 m above the modern lake level (a.m.l.) during MIS 5e (124.2 ± 6.8–114.7 ± 8.0 ka). Holocene high-stands occurred in the last deglaciation–early Holocene (11.1 ± 1.0 ka) at 23 m a.m.l. and in the mid-Holocene (6.7 ± 0.8–3.3 ± 0.4 ka) at 20–14 m a.m.l. The dimensions of the paleo-lakes were recovered, and a hydrological index indicates that the effective moisture during MIS 5e and the mid-Holocene was 10.7 times and 3.6–5.0 times larger than today, respectively. Finally, the possible mechanisms behind the lake level history are discussed based on correlation with independent paleoclimatic records.  相似文献   

3.
  相似文献   

4.
Heavy liquid density separation is commonly utilised in isolating specific minerals from bulk sediment for luminescence dating. K-feldspars are commonly separated from other minerals by isolating the <2.58 g cm−3 fraction which yields infrared stimulated luminescence (IRSL) signals conducive to dating. However, initial measurements of the IRSL and thermoluminescence (TL) signals from the <2.58 g cm−3 fraction of alluvial fan sediments from the Hajar Mountains, northern Oman, were atypical of K-feldspar luminescence signals reported in the literature. In this study, three different density separates (<2.58 g cm−3, 2.58–2.54 g cm−3 and <2.565 g cm−3) were trialled to attempt to isolate pure K-feldspar samples for dating, to measure K-feldspar IRSL signals which are not contaminated with inputs from other feldspar, quartz and/or heavy mineral signals. The mineralogy of these separates was explored using microscopy, X-ray diffraction and mass spectrometry. We found that despite more refined heavy liquid density separation, the proportions of K-feldspar in these separates had a maximum of 40% by weight, remaining significantly contaminated by other minerals. IRSL and TL signals were atypical of K-feldspar for all density separates and it is likely that there is a contribution of signal from IR-sensitive contaminants, such as muscovite. This highlights the importance of investigating the mineralogy of samples for luminescence dating, especially in regions where little prior work has been undertaken.  相似文献   

5.
We present the results of K-feldspar IRSL dating of the four lower terraces (T3–T6) of the Portuguese Tejo River, in the Arripiado-Chamusca area. Terrace correlation was based upon: a) analysis of aerial photographs, geomorphological mapping and field topographic survey; b) sedimentology of the deposits; and c) luminescence dating. Sediment sampled for luminescence dating gave unusually high dose rates, of between 3.4 and 6.2 Gy/ka and, as a result, quartz OSL was often found to be in saturation. We therefore used the IRSL signal from K-feldspar as the principal luminescence technique. The K-feldspar age results support sometimes complex geomorphic correlations, as fluvial terraces have been vertically displaced by faults (known from previous studies). Integration of these new ages with those obtained previously in the more upstream reaches of the Tejo River in Portugal indicates that the corrected K-feldspar IRSL ages are stratigraphically and geomorphologically consistent over a distance of 120 km along the Tejo valley. However, we are sceptical of the accuracy of the K-feldspar ages of samples from the T3 and T4 terraces (with uncorrected De values >500 Gy). In these cases the Dose Rate Correction (DRC) model puts the natural signals close to luminescence saturation, giving a minimum corrected De of about 1000 Gy, and thus minimum terrace ages; this may even be true for those doses >200 Gy. Luminescence dating results suggest that: T3 is older than 300 ka, probably ca. 420–360 ka (～Marine Isotope Stage [MIS]11); T4 is ca. 340–150 ka (～MIS9-6); T5 is 136–75 ka (～MIS5); T6 is 60–30 ka (MIS3); an aeolian sand unit that blankets T6 and some of the older terraces is 30–≥12 ka. Collectively, the luminescence ages seem to indicate that regional river downcutting events may be coincident with periods of low sea level (associated, respectively, with the MIS10, MIS6, MIS4 and MIS2).  相似文献   

6.
Quartz optically stimulated luminescence (OSL) dating is widely used to determine the time of deposition and burial of Late Quaternary sediments. Application of the method is usually limited to the past 150,000 years due to early saturation of the OSL signal. Here we explore the potential to date Quaternary sediments using the violet (402 nm) stimulated luminescence (VSL) signal of quartz. We develop and test a new post-blue VSL single aliquot regenerative dose dating protocol, and demonstrate that the VSL signal originates from a deep trap at about 1.9 eV with a thermal lifetime of 1011 years at 10 °C, and that this trap is bleachable by sunlight. The VSL signal grows with dose to ∼6400 Gy, a factor ∼20 higher than the conventional quartz OSL signal, and with the proposed protocol we recover a known dose of 1000 Gy in three out of four samples. The potential of the VSL protocol for dating Quaternary sediments is highlighted by its successful application to a suite of geological samples ranging in age between 13 and 330 ka. Based on our investigations, we propose that the VSL protocol has the potential to extend the quartz dating range to cover the full Quaternary.  相似文献   

7.
《Quaternary Geochronology》2008,3(1-2):99-113
The Chinese Loess Plateau (CLP) is of major interest to Quaternary geologists because it represents an important terrestrial archive of palaeoclimatic fluctuations. Previous multiple-aliquot luminescence dating studies of Chinese loess mainly used thermoluminescence (TL) and infrared stimulated luminescence (IRSL) signals of polymineral fine-grains; these are known to be subject to anomalous fading and thus will tend to yield age underestimations. In this paper we investigate whether the blue-light stimulated luminescence (BLSL) signals from 63 to 90 μm quartz grains extracted from three western Chinese loess sites (Zhongjiacai, Le Du and Tuxiangdao) can be used to establish a reliable chronology. The single-aliquot regenerative-dose (SAR) procedure is used for the equivalent dose (De) determinations and the suitability of our measurement protocol is confirmed by dose recovery tests. The influence of an IRSL signal on the quartz De measurements derived from BLSL has been investigated. From these results we conclude that an IRSL contamination, expressed as an IRSL/BLSL ratio, of up to 10% can be accepted before the values of De are significantly affected. All three sites yield stratigraphically consistent and spatially highly reproducible optical ages up to about 50–70 ka. At the Tuxiangdao site a marked hiatus in the record is identified between ∼20 and ∼30 ka; this remained undetected in previous studies and clearly highlights the importance of high-resolution optical dating in Chinese loess research. The optical ages presented in this work provide more evidence for episodic loess deposition and varying loess accumulation rates in the western part of the CLP. Our study seems to confirm the potential of optically stimulated luminescence (OSL) dating using the SAR procedure applied to the very fine sandy quartz fraction in Chinese loess back to ∼40–50 ka (∼120–150 Gy).  相似文献   

8.
Although there has been significant advancement of OSL (optically stimulated luminescence) dating of quartz and feldspar over the past decade, the luminescence characteristics of quartz grains in many tectonically active areas are not suitable for accurate age determinations using this technique. This study investigates the reasons for this unsuitability and tests a new measurement protocol (ITL), which appears more promising. At two sites along the central Garlock fault in the Mojave Desert, California, USA, samples collected for OSL dating for this study have proven problematic. At the El Paso Peaks (EPP) trench site, a sequence of OSL samples was collected from sandy units with a well-established radiocarbon chronology, providing the opportunity to assess different approaches and optimize our luminescence dating procedures. At Christmas Canyon West (CCW), where future Garlock fault slip rate studies will be conducted using luminescence dating, samples were collected to assess the luminescence characteristics of both quartz and feldspar in this environment. At both sites, signals from quartz and K-feldspar grains are consistently dim. At EPP, quartz results provide age underestimates, while K-feldspar IRSL yields erratic values; the causes of this problematic behavior are unclear. Preliminary minimum isothermal thermoluminescence (ITL) signals of K-feldspar measured during preheating appear to be consistent with the radiocarbon age estimates, demonstrating potential for accurate age determination in this kind of environment using this protocol.  相似文献   

9.
We investigated the sensitivity change of multiple-elevated-temperature (MET) stimulated post-infrared infrared-stimulated luminescence (MET-pIRIR) signals as a response to irradiation, sunlight bleaching and heating using samples from the Mu Us Desert, central China. A strong dose dependence of MET-pIRIR signal sensitivity was observed. The intensity of the test-dose signals (Tx) increase with the pre-dose received. Furthermore, the signal sensitivity can be reset by sunlight bleaching or heating. This suggests that both the electron traps and hole centres in K-feldspar can be bleached by sunlight, and can, therefore, be used for dating. Using the test-dose signal as a monitor for sensitivity change, it was found that the sensitivity (or hole centres) saturate at a higher dose (D0 = ∼750 Gy) than the sensitivity-corrected signals (or electron traps) (D0 = ∼400 Gy). We propose a multi-aliquot regenerative-dose (MAR) MET-pIRIR dating protocol, which utilises the high saturation dose of hole centres. This protocol was tested using aeolian sediments from north China with ages ranging from 0 to 470 ka. It was found that, compared to the dose limit of ∼800–1000 Gy using the normal MET-pIRIR or pIRIR procedure, the new method can measure a natural dose of up to ∼1500 Gy and produce ages consistent with the expected ages for the samples investigated.  相似文献   

10.
We investigated the infrared stimulated luminescence (IRSL) and post-infrared IRSL (pIRIR) signals emitted by K-feldspars from sedimentary samples from Asia, Europe and Africa using a single-aliquot multiple elevated temperature (MET) stimulation procedure. For separate aliquots of the same sample, we show that variation among the dose response curves (DRCs), or growth curves, constructed from the regenerative dose signal (Lx), the test dose signal (Tx, an indicator of luminescence sensitivity) and the sensitivity-corrected signal (Lx/Tx) can be largely eliminated by normalising the DRCs using one of the regenerative dose signals; we call this procedure ‘regenerative-dose normalisation’ or re-normalisation. Furthermore, for the MET-pIRIR signals measured at 250 °C, we find that different samples have re-normalised DRCs that follow the same growth function, despite the samples differing significantly in terms of their geological provenance, sedimentary context, equivalent dose (De) and luminescence sensitivity. This common feature offers the potential to establish a ‘global standardised growth curve’ (gSGC) for different samples of K-feldspar, and thereby enable De values to be estimated for a large number of single aliquots by projecting the re-normalised natural signals on to the gSGC. For the 18 samples investigated in this study, we find that De estimates obtained from the gSGC are consistent with those obtained using full single-aliquot regenerative dose (SAR) procedures for doses of up to ∼1600 Gy. The establishment of a gSGC would greatly reduce the time required to date older samples using K-feldspar, as regenerative doses of several hundreds to a few thousands of Gy are typically delivered to each aliquot in each SAR cycle.  相似文献   

11.
Luminescence thermochronometry is sensitive to very low temperatures (below ∼120 °C), and enables the resolution of thermal histories over sub-Quaternary timescales. Here we apply a multi-elevated-temperature post-infrared infrared-stimulated luminescence (MET-pIR-IRSL) measurement protocol to feldspar minerals to extract thermal histories. These thermal histories depend on the thermal stability of the MET signal, and are based on the thermal kinetic parameters extracted from isothermal decay experiments. However, the derived thermal kinetic parameters vary with experimental conditions, specifically with the isothermal holding temperatures (ITL) used. We analyse samples with independently known thermal histories, together with synthetic thermal history samples and samples with unknown thermal histories to test the validity of thermal kinetic parameters obtained from different combinations of isothermal holding data. This approach is tested on feldspars of different mineralogies and lithologies. We find that the temperatures inferred from inverting the data change, depending both on the number and on the highest ITL temperature used for thermal kinetic parameter derivation. Analysed samples validate the MET-pIR-IRSL protocol for extracting thermal histories, and we suggest that four isothermal holding temperatures between 190 and 250 °C are used for appropriate thermal kinetic parameter derivation.  相似文献   

12.
Optically stimulated luminescence (OSL) thermochronometry is an emerging application, whose capability to record sub-Million-year thermal histories is of increasing interest to a growing number of subdisciplines of Quaternary research. However, several recent studies have encountered difficulties both in extraction of OSL signals from bedrock quartz, and in their thermochronometric interpretation, thus highlighting the need for a methodological benchmark. Here, we investigate the characteristic OSL signals from quartz samples across all major types of bedrock and covering a wide range of chemical purities. High ratios of infrared to blue stimulated luminescence (IRSL/BLSL), an insensitive ‘fast’ OSL component, and anomalously short recombination lifetimes seen in time-resolved luminescence (TR-OSL), are often encountered in quartz from crystalline (magmatic and metamorphic) bedrock, and may hamper successful OSL dating. Furthermore, even when the desirable signal is present, its concentration might be indistinguishable from its environmental steady-state prediction, thus preventing its conversion to a cooling or heating history. We explore the saturation properties and the thermal activation parameters of various OSL signals in quartz to outline the capabilities and limitations for their use in low-temperature thermochronometry.  相似文献   

13.
The numerical dating of megaflood sediments is a worldwide challenge, a fact that has impeded a full understanding of Late Quaternary dam-outburst flood processes that occurred along the river courses of the Tibetan Plateau. Optically stimulated luminescence (OSL) dating has been widely used on such sediments. Due to their short transportation distances prior to deposition, the OSL signals of megaflood sediments are often partially bleached, resulting in age overestimations. Here, we report on a comparison of OSL ages obtained using both quartz (4–11 μm FG; 90–125, 180–250 μm CG) and K-feldspar (180–250 μm CG) extracted from sediments taken from the Binghong-Bingnong Neolithic-Bronze Age site on the second Jinshan River terrace (T2), in Yunnan Province, southwestern China. Contrary to previous experience suggesting that CG fractions are usually better bleached than FG fractions prior to deposition, our results showed that the OSL ages for the FG quartz fraction were generally younger than those for the CG fraction. This would suggest that the two fractions may have come from different sources, and may have been subject to different geomorphological processes prior to deposition. FG quartz fractions may be suitable to define the maximum age of sediments located in alpine gorge regions. CG quartz fractions can be used by applying the minimum age model (MAM) to select relatively well-bleached grains yielded ages close to the ‘true’ burial ages of the sediments. The results showed that the post-IR IRSL225 ages of single grain K-feldspar were overestimated by > 3 ka, suggesting K-feldspar may not be suitable dating material for megaflood sediments <30 ka. The OSL dates suggest that the T2 terrace was formed ∼8.4 ka, that aeolian sediments were deposited during ∼2.6–1.5 ka, and that the megaflood event occurred after ∼1.5 ka.  相似文献   

14.
Deeply weathered soils cover most of the Piedmont physiographic province of the south-eastern United States of America (USA). These soils have traditionally been inferred to derive from weathered bedrock, but recent work (e.g. Ferguson et al., 2019) suggests that deposited sediments are more prevalent than recognized. Distinguishing sediment from weathered bedrock is integral to understanding critical-zone processes and overall Quaternary landscape evolution, yet the well-developed, red, clay-dominated Ultisols of this temperate and humid region mask differences between transported from non-transported material. Our goal is to determine if optically stimulated luminescence (OSL) methods can distinguish quartz sand from allochthonous (e.g. transported sediment) versus autochthonous (e.g. in situ weathered bedrock) material in soil-profile and core samples from the Redlair Observatory in southwestern North Carolina, USA. Here, we turn to OSL sensitivity and linear-modulated OSL (LM-OSL) to observe the intensity or lack thereof of the fast-decay luminescence component (most light-sensitive signal) in quartz grains from soil horizons and crystalline bedrock-derived saprolite. We find that quartz grains sampled from in situ weathered bedrock as well as from saprolotized clasts of rock have weak luminescence properties and are not dominated by a fast-decay luminescence component. In contrast, quartz grains from transported sediment (e.g. mobile regolith; colluvium; alluvium) contain sensitive grains with more dominant fast components. These results suggest that quartz luminescence sensitivity can be a tool to differentiate between in situ weathered bedrock and similar looking mobile regolith and colluvium over-printed by soil development.  相似文献   

15.
The Late Pleistocene sea-level history of Antarctica is key to understanding and predicting the responses of icesheets, which significantly contribute to the global sea level, to changing climates. Coastal sediments at Lützow-Holm Bay, East Antarctica, have yielded radiocarbon ages of Holocene and Marine Oxygen Isotope Stage (MIS) 3 from deposits above the present sea level, suggesting that there have been two episodes of sea-level highstand. However, radiocarbon dating is likely to be less accurate for dating sediments close to or older than 40–50 ka, the upper limit of its application. We thus explored the applicability of luminescence dating to coastal sediments newly sampled from Langhovde on the eastern coast of Lützow-Holm Bay. Samples were collected from a trench <1 m deep and at several meters above the present sea level. Quartz coarse and fine grains, K-feldspar coarse grains, and polymineral fine grains were extracted from the samples. Quartz coarse and fine grains both showed very low optically stimulated luminescence sensitivity and no fast component and thus were not considered further. Dose-recovery tests on post-infrared infrared-stimulated luminescence (post-IR IRSL) signals of K-feldspar and polymineral grains yielded variable results and suggested acceptable measurement conditions for each grain size fraction and expected equivalent dose. Preliminary measurements revealed that the trench section can be divided into the upper and lower layers, corresponding to the Holocene and MIS 7, respectively. Further application of post-IR IRSL dating to coastal sediments, including to previously radiocarbon-dated sections, could refine our understanding of the late Quaternary relative sea-level history in East Antarctica.  相似文献   

16.
The Quaternary geology of the central coast of British Columbia contains a rich and complex record of glacial activity, post-glacial sea level and landscape change, and early human occupation spanning the last ∼10,000 years. At present, however, this region remains a largely understudied portion of coastal North America. This study describes the luminescence characteristics of quartz and K-feldspar from coastal dune and beach sands on Calvert Island and develops a suitable optical dating protocol that will allow for a more rigorous chronology for post-glacial landscape evolution and human occupation on British Columbia's central coast. Luminescence signals from Calvert Island quartz are dim, and appear to lack the so-called “fast” component that is most desirable for optical dating. K-feldspar signals are sufficiently bright for optical dating. We test and refine a single-aliquot regenerative-dose (SAR) protocol for K-feldspar specific to Calvert Island samples through a series of dose recovery and preheat plateau tests. Two approaches for correcting a sample age for anomalous fading are compared and a correction for phototransfer is introduced and applied. Measured fading rates vary from sample to sample implying that, in this region, it is not sufficient to rely on two or three representative fading rates as has sometimes been done elsewhere. Refined age estimates show consistency with independent radiocarbon dating control and help identify radiocarbon-dated organic-rich sediments that have been reworked.  相似文献   

17.
Coastal plain of Hangzhou Bay, to the south of the present Yangtze Estuary, is closely linked to the evolution of the Yangtze River delta. However, absolute age of Pre-Holocene sediments is limited, which hinders the understanding of this area's environmental evolution. In this study, using optically stimulated luminescence (OSL), single aliquots and single grains of quartz and K-feldspar were used to date the late Quaternary sediments in coastal plain on the southern Hangzhou Bay. The vertical difference in particle size composition render either silt- or sand-sized quartz for dating. Cross-checking of multiple OSL dating methods indicated that the upper ∼65 m recorded the Holocene part of the succession; sediment from a depth of 136.6 m was dated to ∼180 ka. It was found that the single-grain method was more reliable in comparison to single-aliquot age, the former minimized the effect of signal components. Single-grain quartz and K-feldspar luminescence yielded consistent ages at sample depth of 136.6 m (∼160–180 ka), while the latter gave robust age at depth of 115.5 m (∼150 ka). This chronology is in general in accordance with neighbouring cores and can constrain paleomagnetic dating results in those cores. Taking together, the study site has thickest Holocene deposits in comparison to the highland centered around Taihu Lake on the southern Yangtze delta. Moreover, the luminescence characteristics of quartz from different sample depths, behaved differently with respect to luminescence sensitivity, signal components and saturation level, perhaps reflecting varied provenance and weathering characteristics caused by climate change.  相似文献   

18.
The infrared (IR) stimulated luminescence (IRSL) and post-IR IRSL (pIRIR) signals from K-feldspar can, for convenience, be divided into two components, bleachable and ‘non-bleachable’, where the latter corresponds to the ‘residual’ signal observed in sunlight-bleached samples. In this paper, we examine the non-bleachable component of IRSL of K-feldspar for several sedimentary samples from across Eurasia. We observed a large variability in the residual doses among these samples after prolonged exposure to sunlight. By employing multiple elevated temperature (MET) IR stimulations at 50–300 °C, we show that the residual dose increases systematically with stimulation temperature, attaining values as high as ∼50 Gy at 300 °C, even after several hours to tens of hours of exposure to unfiltered sunlight. We examined two samples in detail and found that the bleachable and non-bleachable components produced different dose response curves. Pulse annealing studies showed that the non-bleachable component is more stable than the bleachable component, suggesting that a preheat procedure cannot eliminate the non-bleachable component. Additional experiments revealed that the non-bleachable component is dose dependent. Owing to this dose dependency, we demonstrate mathematically and empirically that the simple subtraction of a residual dose from the measured equivalent dose (De) – which is the most common approach employed (if any residual dose is subtracted at all) – will result in underestimation of the actual De. We present a method to correct for the dose dependency of the residual dose, which can improve the accuracy of either MET-pIRIR or pIRIR age estimates for samples in which the non-bleachable component represents a significant fraction of the measured signals.  相似文献   

19.
Optical dating was applied to two loess-paleosol sections (Lujiaowan and Shuixigou) from the northern piedmont of Tianshan Mountain, Xinjiang province, China. The two sections are over 200 km apart and have a similar depositional sequence, which consists of two paleosol layers embedded by one loess layer. Two difficulties were met in optical dating. First, because the sections are located on the slope of the mountain, it was found that some cliff debris, with coarse grains (>200 μm), were mixed with the eolian sediments by rainfall, especially in the paleosol layers. Second, the optically stimulated luminescence (OSL) signals of quartz grains from the deposits were too dim to obtain a reliable equivalent dose (De). The 63–90 μm K-feldspar grains were separated to decrease the debris portion, and they yielded bright infrared stimulated luminescence (IRSL) signals. A multiple-elevated-temperature post-IR IRSL (MET-pIRIR) procedure was applied to determine De. Comparing the optical dating ages of the two sections, the Lujiaowan (LJW) and Shuixigou (SXG) sections recorded almost the same depositional process during the Holocene. The ages of the two loess layers (2.44–3.38 ka at LJW; 2.47–4.36 ka at SXG) suggested that one drought event happened widely in this westerly dominated area. The same drought event 2.5–3.5 ka ago also happened in the Chinese Loess Plateau (CLP), where the summer monsoon dominated. However, the paleosol development period (6.6–4 ka) in the study area was distinguished from the monsoon dominated area (8–4 ka), which suggests an arid early Holocene in the westerly area.  相似文献   

20.
The geological record preserved in coastal salt marshes provides an opportunity to determine past hurricane activity during the Late Holocene in New England, USA. High precision dating is important to correlate overwash sand layers associated with hurricane strikes between different sites along the coastline. Three different optical dating methods have been tested and compared with independent age control; i) optically stimulated luminescence from quartz, ii) infrared stimulated luminescence from K-feldspar, and iii) a subtraction method.Quartz and K-feldspar dating results for three samples in a core from Round Hill Beach Marsh are in stratigraphic order and they are consistent within errors with radiocarbon ages and with each other. Subtraction dating results agreed with the quartz and K-feldspar ages for two of the three samples, but the subtraction age of the youngest sample gave an age underestimate. Replicate equivalent dose values from quartz showed a larger variation than those from feldspars, and this resulted in larger errors for the quartz and subtraction ages than those based on feldspars. K-feldspar yields the most precise optical ages, but is complicated by the need to correct for anomalous fading. Both quartz and K-feldspar are suitable for optical dating of hurricane overwash deposits in New England.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号