首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 421 毫秒
1.
Numerical models on thermal structure, convective flow of solid, generation and transportation of H2O-rich fluid in subduction zones are consolidated to have a comprehensive view of the subduction zone processes: heat balance, circulation of H2O magmatism–metamorphism, growth of arcs and continental margins. A large scale convection model with steady subduction of a cold old slab (130 Myr old) predicts rapid ( 100 Myr) cooling of subduction zones, resulting in cessation of magmatism. The model also predicts that the mantle temperature beneath arcs and continental margins is greatly affected by the effective temperature of the subducting slab, i.e., the age of the subducting slab. If subduction of a young hot slab, including ridge subduction, occurs every 60 to 120 Myr as is suggested for eastern Asia, the average temperature beneath arcs is increased by about 300 °C, which may explain the long-lasting magmatism in eastern Asia. Associated with subduction of young slabs and ridges, thermal structure and circulation of H2O are greatly modified to cause a transition from (1) normal arc magmatism, (2) forearc mantle melting, to (3) slab melting to produce a significant amount (100 km3) of granitic melts, associated with both high-P/T and low-P/T type metamorphism. The last stage of (3) can result in formation of a granitic batholith belt and a paired metamorphic belts. Synthesis of the numerical models and observations suggest that episodic subduction of young slabs and ridges can explain heat source for generating a large amount of granitic magmas of batholiths, synchronous formation of batholith and regional metamorphic belts, and P–T conditions of the paired metamorphism. Even the high-P/T metamorphism requires an elevated geothermal structure in the forearc region, associated with ridge subduction. Although the emplacement of the batholiths and the regional metamorphic belts, and the mass balance in subduction zones are not well constrained at present, the episodic event associated with ridge subduction is thought to be essential for net growth of arcs and continental margins, as well as for the long-term heat balance in subduction zones.  相似文献   

2.
Prograde mineral assemblages and compositions have been predicted for pelitic schist in the 10 component system Na2O–K2O–CaO–MnO–FeO–MgO–Al2O3–SiO2–CO2–H2O for three cases of prograde metamorphism and fluid-rock interaction: (1) increasing temperature (T) at constant pressure (P) and constant pore fluid volume (1%) without infiltration (no-infiltration case); (2) increasing T at constant P accompanied by sufficient fluid infiltration that fluid composition is at all times constant (large-flux case); and (3) increasing T at constantP accompanied by a timeintegrated fluid flux f 104 cm3 cm 2 (intermediate-flux case). Stable mineral assemblages and compositions were calculated by solving a system of non-linear equations that specify mass balance and chemical equilibrium between minerals and fluid. The model pelitic system includes quartz, muscovite, plagioclasc, chlorite, ankerite, siderite, biotite, garnet, staurolite, andalusite, kyanite, sillimanite, K-feldspar, and a coexisting, binary H2O–CO2 fluid. Specifically, prograde thermal metamorphism was modelled for Shaw's (1956) average low-grade pelite and for a moderate range of bulk rock compositions at P=3, 5, and 7 kb and initial fluids with Xco 2 o =0.02–0.40. The model predicts a carbonate-bearing mineral assemblage for average pelite under chlorite zone conditions composed of quartz, muscovite, albite, chlorite, ankerite, and siderite. The mineral assemblages predicted for the noinfiltration case are unlike those typically observed in regional metamorphic terranes. Simulations of metamorphism for the large-flux and intermediate-flux cases, however, reproduce the sequence of mineral assemblages observed in normal Barrovian regional metamorphic terranes. These results suggest that regional metamorphism of pelitic schists is typically associated with infiltration of significant quantities of aqueous fluid.  相似文献   

3.
Sodic pyroxene (jadeite content X jd=0.1–0.3) occurs locally as small inclusions within, albite porphyroblasts and in the matrix of hematite-bearing quartz schists in the Sanbagawa (Sambagawa) metamorphic belt, central Shikoku, Japan. The sodic, pyroxene-bearing samples are characteristically free from chlorite and their typical mineral assemblage is sodic pyroxene+subcalcic (or sodic) amphibole+phengitic mica+albite+quartz+hematite+titanite±epidote. Spessartine-rich garnet occurs in Mn-rich samples. Sodic pyroxene in epidote-bearing samples tends to be poorer in acmite content (average X Acm=0.26–0.50) than that in the epidote-free samples (X Acm=0.45–0.47). X Jd shows no systematic relationship to metamorphic grade, and is different among the three sampling regions [Saruta-gawa, Asemi-gawa and Bessi (Besshi)]. The average X Jd of the Saruta-gawa samples (0.21–0.29) is higher than that of the Asemi-gawa (0.13–0.17) and Bessi (0.14–0.23). The P-T conditions of the Asemi-gawa and Bessi regions are estimated at 5.5–6.5 kbar, >360°C in the chlorite zone, 7–8.5 kbar, 440±15°C in the garnet zone and 8–9.5 kbar, 520±25°C in the albite-biotite zone. Metamorphic pressure of the Saruta-gawa region is systematically 1–1.5 kbar higher than that of the Asemi-gawa and Bessi regions, and materials of the Saruta-gawa region have been subducted to a level 3–5 km deeper than materials that underwent metamorphism at equivalent temperatures and are now exposed in the Asemi-gawa and Bessi regions. Pressure slightly increases toward the north (structurally high levels) through the Sanbagawa belt of central shikoku. Two types of zonal structure were observed in relatively coarse-grained sodic pyroxenes in the matrix. One type is characterized by increasing X Jd from core to rim, the other type by decreasing X Jd from core to rim. Both types of zoned pyroxenes show an increase in X Fe 2+[=Fe2+/(Fe2++Mg)] from core to rim. The first type of zoning was observed in a sample from the chlorite zone of lowest grade, whereas the latter occurs in the garnet and albite-biotite zones of higher grade. The contrast in zonal structure implies that dP/dT during prograde metamorphism decreased with increasing metamorphic grade and may have been negative in some samples from the higher-grade zones. The estimated dP/dT of the prograde stage of the chlorite zone is 3.2 kbar/100°C, and that of the garnet and albite-biotite zones is -1.8 to 0.9 kbar/100°C. The variation of dP/dT at shallow and deep levels of a subduction system probably reflects the difference of heating duration and/or change in thermal gradient of the subduction zone by continuous cooling of the surrounding mantle.  相似文献   

4.
A fluid inclusion study on metamorphic minerals of successive growth stages was performed on highly deformed paragneisses from the Nestos Shear Zone at Xanthi (Central Rhodope), in which microdiamonds provide unequivocal evidence for ultrahigh-pressure (UHP) metamorphism. The correlation of fluid inclusion density isochores and fluid inclusion reequilibration textures with geothermobarometric data and the relative chronology of micro- and macro-scale deformation stages allow a better understanding of both the fluid and metamorphic evolution along the P–T–d path. Textural evidence for subduction towards the NE is recorded by the orientation of intragranular NE-oriented fluid inclusion planes and the presence of single, annular fluid inclusion decrepitation textures. These textures occur within quartz “foam” structures enclosed in an earlier generation of garnets with prolate geometries and rarely within recrystallized matrix quartz, and reequilibrated both in composition and density during later stages of exhumation. No fluid inclusions pertaining to the postulated ultrahigh-pressure stage for microdiamond-bearing garnet–kyanite–gneisses have yet been found. The prolate shape of garnets developed during the earliest stages of exhumation that is recorded structurally by (L  S) tectonites, which subsequently accommodated progressive ductile SW shearing and folding up to shallow crustal levels. The majority of matrix kyanite and a later generation of garnet were formed during SW-directed shear under plane-strain conditions. Fluid inclusions entrapped in quartz during this stage of deformation underwent density loss and transformed to almost pure CO2 inclusions by preferential loss of H2O. Those inclusions armoured within garnet retained their primary 3-phase H2O–CO2 compositions. Reequilibration of fluid inclusions in quartz aggregates is most likely the result of recrystallization along with stress-induced, preferential H2O leakage along dislocations and planar lattice defects which results in the predominance of CO2 inclusions with supercritical densities. Carbonic fluid inclusions from adjacent kyanite–corundum-bearing pegmatoids and, the presence of shear-plane-parallel fluid inclusion planes within late quartz boudin structures consisting of pure CO2-fluid inclusions with negative crystal shapes, bear witness of the latest stage of deformation by NE-directed extensional shear.This study shows that the textures of early fluid inclusions that formed already during the prograde metamorphic path can be preserved and used to derive information about the kinematics of subduction that is difficult to obtain from other sources. The textures of early inclusions, together with later generations of unaltered primary and secondary inclusions in metamorphic index minerals that can be linked to specific deformation stages and even P–T conditions, are a welcome supplement for the reconstruction of a rather detailed P–T–d path.  相似文献   

5.
Magnetic fabric and rock-magnetic studies have been carried out for the non-fossiliferous, low- to medium-grade metasedimentary rocks in the southwestern part of the Okcheon metamorphic belt (OMB). Two major metamorphic events in the study area were previously recognized: regional metamorphism (M1) in the late Carboniferous to early Permian and contact metamorphism (M2) due to the intrusion of granite in the middle Jurassic. The metamorphic grade of the study area increases from the biotite zone in southeast through the garnet zone to the staurolite zone towards the northwest. Magnetic fabrics of the study area are generally well defined and can be characterized according to the metamorphic zones. Magnetic foliation is the dominant magnetic fabric in the biotite zone, while magnetic lineation prevails in both garnet and staurolite zones. We interpret the metamorphism-related deformation history of the study area based on magnetic fabrics, magnetic mineralogy and previously reported metamorphic evolution as follows. Penetrative NW-dipping cleavage, represented by magnetic foliation, was formed in the study area by prevailing NW–SE shortening event during the M1 regional metamorphism in the late Carboniferous–early Permian. This shortening event is interpreted to be associated with the collisional event between the North and South China blocks. Cleavages dipping steeply to the southeast in the staurolite zone are attributed to the pressure exerted from the intrusion of Jurassic granite in the northwestern area.  相似文献   

6.
The regional distribution of metamorphic mineral assemblages in Mesozoic carbonate rocks of the Western Hohe Tauern allows the mapping of isograds based on the appearance of biotite+calcite and biotite+zoisite+calcite. The latter isograd corresponds approximately to the thermal maximum of the alpidic metamorphism in the central part of this area. An estimate of P, T, X fluid conditions can be obtained from phase relations among muscovite, biotite, chlorite, margarite, tremolite, zoisite, anorthite, quartz, calcite, and dolomite in the system K2O-CaO-MgO-Al2O3-SiO2-H2O-CO2 which approximates the composition of marls. Calculations based on various experimental and thermodynamic data have been made with emphasis on phase relations pertinent to a group of carbonate rocks with very low Fe and Na contents in non-opaque minerals. Significant and opposite deviations from the phase relations for stochiometric end member mineral compositions are due to the substitutions F-OH and Mg+Si-2Al. Consistency of observed and calculated phase relations is favoured by high F-contents. For the majority of carbonate rocks in the high metamorphic zone, maximum temperatures around 550° C, minimum pressures of 4–6 kb, and relatively low XCO2 values within the stability field of zoisite and of biotite+calcite+quartz are indicated.  相似文献   

7.
We report for the first time the evidence for prograde high-pressure (HP) metamorphism preceding a peak ultrahigh-temperature (UHT) event in the northernmost part of the Madurai Block in southern India. Mg–Al-rich Grt–Ged rocks from Komateri in Karur district contain poikiloblastic garnet with numerous multi-phase inclusions. Although most of the inclusion assemblages are composed of gedrite, quartz, and secondary biotite, rare staurolite + sapphirine and spinel + quartz are also present. The XMg (=Mg/[Fe+Mg]) of staurolite (0.45–0.49) is almost consistent with that reported previously from Namakkal district in the Palghat–Cauvery Shear Zone system (XMg = 0.51–0.52), north of the Madurai Block. The HP event was followed by peak UHT metamorphism at T = 880–1040 °C and P = 9.8–12.5 kbar as indicated by thermobarometric computations in the Grt–Ged rock and associated mafic granulite. Symplectic intergrowth of spinel (XMg = 0.50–0.59, ZnO < 1.7 wt.%) and quartz, a diagnostic indicator of UHT metamorphism, probably formed by decompression at UHT conditions. The rocks subsequently underwent retrograde metamorphism at T = 720–760 °C and P = 4.2–5.1 kbar. The P–T conditions and clockwise exhumation trajectory of the Komateri rocks, comparable to similar features recorded from the Palghat–Cauvery Shear Zone system, suggest that the Madurai Block and the Palghat–Cauvery Shear Zone system underwent similar HP and UHT metamorphic history probably related to the continent–continent collision during the final stage of amalgamation of Gondwana supercontinent.  相似文献   

8.
Abstract Metapelites in the Altavista area, southwest Virginia Piedmont, USA, underwent allochemical hydrothermal retrograde metamorphism in synmetamorphic shear zones. The metapelites of the Evington Group were metamorphosed in a prograde sequence of chlorite, staurolite, and sillimanite zones. Garnet–biotite geothermometry and phase relations support eastward increasing metamorphic grade, ranging from 570° C in the staurolite zone to 650° C in the sillimanite zone at c. 5.8 kbar. Sillimanite-zone rocks later underwent progressive retrogression around shear zones which acted as fluid conduits. Retrograde assemblages are successively zoned around the shear zones with staurolite-, chloritoid- and kyanite-bearing assemblages. The shear zones commonly contain kyanite or tourmaline veins. Applicable phase equilibria indicate that retrogression occurred during isobaric cooling through c. 200–270° C. Rock compositional changes with retrogression occurred in steps: SiO2 was gained in the early stages of the retrogression but lost in the late stages; Al2O3, K2O, and H2O were increasingly gained through the sequence; CaO was increasingly lost. Addition of H2O and decreasing temperatures resulted in new ferromagnesian minerals (staurolite, chloritoid, chlorite) and changes in H2O, SiO2, Al2O3, K2O, and CaO contents produced muscovite and sodic plagioclase. Subsequent to prograde metamorphism, deeply derived fluids migrated upwards along shear zones, providing fluid and energy for the retrograde reactions. The sheared rocks underwent fluid infiltration with fluid fluxes of 1.8 × 107–4.3 × 107 cm3/cm2 corresponding to minimum estimated fluid-to-rock ratios of 7.5–21 as a function of position within the shear zone. Fluid flow was from high to low temperature early and low to high temperature later in the retrogression.  相似文献   

9.
Abstract The Siluro-Devonian Waits River Formation of north-east Vermont was deformed, intruded by plutons and regionally metamorphosed during the Devonian Acadian Orogeny. Five metamorphic zones were mapped based on the mineralogy of carbonate rocks. From low to high grade, these are: (1) ankerite-albite, (2) ankerite-oligoclase, (3) biotite, (4) amphibole and (5) diopside zones. Pressure was near 4.5kbar and temperature varied from c. 450° C in the ankerite-albite zone to c. 525° C in the diopside zone. Fluid composition for all metamorphic zones was estimated from mineral equilibria. Average calculated χco2[= CO2/(CO2+ H2O)] of fluid in equilibrium with the marls increases with increasing grade from 0.05 in the ankerite-oligoclase zone, to 0.25 in the biotite zone and to 0.44 in the amphibole zone. In the diopside zone, χCO2 decreases to 0.06. Model prograde metamorphic reactions were derived from measured modes, mineral chemistry, and whole-rock chemistry. Prograde reactions involved decarbonation with an evolved volatile mixture of χCO2 > 0.50. The χCO2 of fluid in equilibrium with rocks from all zones, however, was generally <0.40. This difference attests to the infiltration of a reactive H2O-rich fluid during metamorphism. Metamorphosed carbonate rocks from the formation suggests that both heat flow and pervasive infiltration of a reactive H2O-rich fluid drove mineral reactions during metamorphism. Average time-integrated volume fluxes (cm3 fluid/cm2 rock), calculated from the standard equation for coupled fluid flow and reaction in porous media, are (1) ankerite-oligoclase zone: c. 1 × 104; (2) biotite zone: c. 3 × 104; (3) amphibole zone: c. 10 × 104; and diopside zone: c. 60 × 104. The increase in calculated flux with increasing grade is at least in part the result of internal production of volatiles from prograde reactions in pelitic schists and metacarbonate rocks within the Waits River Formation. The mapped pattern of time-integrated fluxes indicates that the Strafford-Willoughby Arch and the numerous igneous intrusions in the field area focused fluid flow during metamorphism. Many rock specimens in the diopside zone experienced extreme alkali depletion and also record low χCO2. Metamorphic fluids in equilibrium with diopside zone rocks may therefore represent a mixture of acid, H2O-rich fluids given off by the crystallizing magmas, and CO2-H2O fluids produced by devolatilization reactions in the host marls. Higher fluxes and different fluid compositions recorded near the plutons suggest that pluton-driven hydrothermal cells were local highs in the larger regional metamorphic hydrothermal system.  相似文献   

10.
While extensive studies have demonstrated fluid release during subduction of oceanic crust, little attention has been paid to fluid activity during subduction and exhumation of continental crust. Abundant occurrence of quartz veins within eclogites in the Dabie-Sulu orogenic belt of China provides us with an opportunity to study the origin and role of vein-forming fluids with respect to heat and mass transfer during ultrahigh pressure (UHP) metamorphism and its relevant processes. This study focuses on kyanite-quartz vein that occurs as polycrystalline aggregates within the low-T eclogite in the Dabie terrane, which are interpreted as pseudomorphs after former porphyroblasts of lawsonite. Coesite pseudomorphs were found for the first time in eclogite garnet, resulting in a revised estimate of peak P–T conditions at 670°C and 3.3 GPa for the eclogite and thus upgrading the high-P unit to an UHP unit. On the basis of the relationship between calculated P–T path and metamorphic reactions as well as the absence of foliation texture, and undulose extinction of quartzes in the vein, we conclude that lawsonite breakdown into kyanite–quartz–zoisite assemblage took place at the onset of exhumation subsequent to peak pressure. Retrograde metamorphism caused O and H isotope disequilibria between some of the minerals, but the fluid for retrograde reactions was internally buffered in stable isotope compositions. Zircon U–Pb dating and whole-rock Nd–Sr isotope analyses indicate that eclogite protolith is the paleoceanic basalt that was derived from the depleted mantle by magmatism at about 1.8 to 1.9 Ga but experienced hydrothermal alteration by surface waters. The altered basalt underwent UHP metamorphism in the Triassic that caused fluid release for zircon growth/overgrowth not only at about 242±3 Ma prior to the onset of peak pressure but also at about 222±4 Ma during decompression dehydration by lawsonite breakdown and hydroxyl exsolution in the low-T/UHP eclogite. Consistent ages of 236.1±4.2 Ma and 230±7 Ma were obtained from mineral Sm–Nd and Rb–Sr isochron dating, respectively, indicating attainment and preservation of Nd and Sr isotope equilibria during the Triassic UHP eclogite-facies metamorphism. Ar–Ar dating on paragonite from the eclogite gave consistent plateau and isochron ages of 241.3±3.1 Ma and 245.5±9.8 Ma, respectively, which are interpreted to date paragonite crystallization during the prograde eclogite-facies metamorphism. The timing of peak UHP metamorphism for the low-T eclogite is constrained at sometime prior to 236.1±4.2 Ma. Thus the termination age of peak UHP metamorphism may be different in different slices of deep-subducted slab.  相似文献   

11.
Eclogites and related high‐P metamorphic rocks occur in the Zaili Range of the Northern Kyrgyz Tien‐Shan (Tianshan) Mountains, which are located in the south‐western segment of the Central Asian Orogenic Belt. Eclogites are preserved in the cores of garnet amphibolites and amphibolites that occur in the Aktyuz area as boudins and layers (up to 2000 m in length) within country rock gneisses. The textures and mineral chemistry of the Aktyuz eclogites, garnet amphibolites and country rock gneisses record three distinct metamorphic events (M1–M3). In the eclogites, the first MP–HT metamorphic event (M1) of amphibolite/epidote‐amphibolite facies conditions (560–650 °C, 4–10 kbar) is established from relict mineral assemblages of polyphase inclusions in the cores and mantles of garnet, i.e. Mg‐taramite + Fe‐staurolite + paragonite ± oligoclase (An<16) ± hematite. The eclogites also record the second HP‐LT metamorphism (M2) with a prograde stage passing through epidote‐blueschist facies conditions (330–570 °C, 8–16 kbar) to peak metamorphism in the eclogite facies (550–660 °C, 21–23 kbar) and subsequent retrograde metamorphism to epidote‐amphibolite facies conditions (545–565 °C and 10–11 kbar) that defines a clockwise P–T path. thermocalc (average P–T mode) calculations and other geothermobarometers have been applied for the estimation of P–T conditions. M3 is inferred from the garnet amphibolites and country rock gneisses. Garnet amphibolites that underwent this pervasive HP–HT metamorphism after the eclogite facies equilibrium have a peak metamorphic assemblage of garnet and pargasite. The prograde and peak metamorphic conditions of the garnet amphibolites are estimated to be 600–640 °C; 11–12 kbar and 675–735 °C and 14–15 kbar, respectively. Inclusion phases in porphyroblastic plagioclase in the country rock gneisses suggest a prograde stage of the epidote‐amphibolite facies (477 °C and 10 kbar). The peak mineral assemblage of the country rock gneisses of garnet, plagioclase (An11–16), phengite, biotite, quartz and rutile indicate 635–745 °C and 13–15 kbar. The P–T conditions estimated for the prograde, peak and retrograde stages in garnet amphibolite and country rock are similar, implying that the third metamorphic event in the garnet amphibolites was correlated with the metamorphism in the country rock gneisses. The eclogites also show evidence of the third metamorphic event with development of the prograde mineral assemblage pargasite, oligoclase and biotite after the retrograde epidote‐amphibolite facies metamorphism. The three metamorphic events occurred in distinct tectonic settings: (i) metamorphism along the hot hangingwall at the inception of subduction, (ii) subsequent subduction zone metamorphism of the oceanic plate and exhumation, and (iii) continent–continent collision and exhumation of the entire metamorphic sequences. These tectonic processes document the initial stage of closure of a palaeo‐ocean subduction to its completion by continent–continent collision.  相似文献   

12.
Three successive metamorphic stages M1, M2 and M3 have been distinguished in polymetamorphic granulite facies quartz-feldspathic gneisses from the Seiland Igneous Province, Caledonides of northern Norway. An early period of contact metamorphism (M1; 750–950°C, ca. 5 kbar) was followed by cooling, accompanied by strong shearing and recrystallization at intermediate-P granulite facies conditions (M2; 700–750°C, 5–6kbar). High-P granulite facies (M3; ca. 700°C, 7–8 kbar) is related to recrystallization in narrow ductile shear zones and secondary growth on M2 minerals. On the basis of composition, fluid inclusions in cordierite, quartz and garnet can be divided into three major types: (1) CO2 inclusions; (2) mixed CO2–N2 inclusions; (3) N2 inclusions. Fluid chronology and mineral assemblages suggest that the earliest inclusions consist of pure CO2 and were trapped at the M1 contact metamorphic episode. A carbonic fluid was also present during the intermediate-P granulite facies M2 metamorphism. The CO2-rich inclusions in M2 garnet can be divided into two generations, an early lower-density and a late higher-density, with isochores crosscutting the P-T box of M2 and M3, respectively. The nitrogen-rich fluids were introduced at a late stage in the fluid evolution during the high-P M3 event. The mixed CO2–N2 inclusions, with density characteristics compatible with M3 conditions, are probably produced from intersection between pre-existing pure CO2 inclusions and N2 fluids introduced during M3. The fluid inclusion data agree with the P-T evolution established from mineral assemblages and mineral chemistry.  相似文献   

13.
Quartz veins syntectonic to distinct folding events in metasediments from the Voltri Group (Ligurian Alps) were studied in order to compare fluid and structural evolution. Studied veins (VS1, VS2, VS3) pertain to three distinct generations of folds (F1, F2, F3) that formed during the retrograde metamorphic evolution. Two types of fluids characterize the different generations of veins and are represented essentially by aqueo-carbonic mixtures of moderate salinity with decreasing densities (1.01–0.41 g/cm3). The chemical evolution is characterised by a progressive decrease of H2O, from early fluids associated with opening of VS1 and VS2 (XCO2≈0.08) to fluids related to VS3 formation (XCO2≈0.3). The close match between the fluids in VS1 and VS2 suggests that the development of two superimposed systems of folds (F1 and F2 folds) occurs under very similar P–T conditions, during a progressive and continuous deformational event at glaucophanic and/or barroisitic metamorphic grade. A different evolution is outlined for the formation of VS3 during low greenschist grade. Successive isochores allow us to define a retrograde decompression path for the Voltri Group. Present results indicate that fluid inclusions are powerful markers to constrain the P–T–t conditions of different folding events.  相似文献   

14.
ABSTRACT The Darjeeling-Sikkim region provides a classic example of inverted Himalayan metamorphism. The different parageneses of pelitic rocks containing chlorite, biotite, garnet, staurolite, kyanite, sillimanite, plagioclase and K-feldspar are documented by a variety of textures resulting from continuous and discontinuous reactions in the different zones. Microprobe data of coexisting minerals show that XMg varies in the order: garnet < staurolite < biotite < chlorite. White mica is a solid solution between muscovite and phengite. Garnet is mostly almandine-rich and shows normal growth zoning in the lower part of the Main Central Thrust (MCT) zone, and reverse zoning in the upper part of the zone. Chemographical relations and inferred reactions for different zones are portrayed in AFM space. In the low-grade zones oriented chlorites and micas and rolled garnets grew syntectonically, and were succeeded by cross-cutting chlorites and micas and garnet rims. In the upper zones sillimanite, kyanite and staurolite crystallized during a static inter-kinematic phase. P-T contitions of metamorphism, estimated through different models of geothermobarometry, are estimated to have been 580°c for the garnet zone to a maximum of 770°c for the sillimanite zone. The preferred values of pressure range from 5.0 kbar to 7.7 kbar. Models to explain the inverted metamorphism include overthrusting of a hot high Himalayan slab along a c. 5 km wide ductile MCT zone and the syn- or post-metamorphic folding of isograds.  相似文献   

15.
The timing and thermal effects of granitoid intrusions into accreted sedimentary rocks are important for understanding the growth process of continental crust. In this study, the petrology and geochronology of pelitic gneisses in the Tseel area of the Tseel terrane, SW Mongolia, are examined to understand the relationship between igneous activity and metamorphism during crustal evolution in the Central Asian Orogenic Belt (CAOB). Four mineral zones are recognized on the basis of progressive changes in the mineral assemblages in the pelitic gneisses, namely: the garnet, staurolite, sillimanite and cordierite zones. The gneisses with high metamorphic grades (i.e. sillimanite and cordierite zones) occur in the central part of the Tseel area, where granitoids are abundant. To the north and south of these granitoids, the metamorphic grade shows a gradual decrease. The composition of garnet in the pelitic gneisses varies systematically across the mineral zones, from grossular‐rich garnet in the garnet zone to zoned garnet with grossular‐rich cores and pyrope‐rich rims in the staurolite zone, and pyrope‐rich garnet in the sillimanite and cordierite zones. Thermobarometric analyses of individual garnet crystals reveal two main stages of metamorphism: (i) a high‐P and low‐T stage (as recorded by garnet in the garnet zone and garnet cores in the staurolite zone) at 520–580 °C and 4.5–7 kbar in the kyanite stability field and (ii) a low‐P and high‐T stage (garnet rims in the staurolite zone and garnet in the sillimanite and cordierite zones) at 570–680 °C and 3.0–6.0 kbar in the sillimanite stability field. The earlier high‐P metamorphism resulted in the growth of kyanite in quartz veins within the staurolite and sillimanite zones. The U–Pb zircon ages of pelitic gneisses and granitoids reveal that (i) the protolith (igneous) age of the pelitic gneisses is c. 510 Ma; (ii) the low‐P and high‐T metamorphism occurred at 377 ± 30 Ma; and (iii) this metamorphic stage was coeval with granitoid intrusion at 385 ± 7 Ma. The age of the earlier low‐T and high‐P metamorphism is not clearly recorded in the zircon, but probably corresponds to small age peaks at 450–400 Ma. The low‐P and high‐T metamorphism continued for c. 100 Ma, which is longer than the active period of a single granitoid body. These findings indicate that an elevation of geotherm and a transition from high‐P and low‐T to low‐P and high‐T metamorphism occurred, associated with continuous emplacement of several granitoids, during the crustal evolution in the Devonian CAOB.  相似文献   

16.
The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D2 shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D3 shearing and intense quartz veining. The development of a S2–S3 crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D2 shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D3 is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S3. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ18O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D2 deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D3 deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.  相似文献   

17.
The Trinity peridotite was emplaced over metabasalts and metasedimentary rocks of the central metamorphic belt along the Devonian Trinity thrust zone. Three metamorphic events can be recognized in the Trinity peridotite: (1) antigorite (D= –63 to –65%.) formation related to regional underthrusting of the central metamorphic belt; (2) contact metamorphism associated with Mesozoic dioritic plutons; and (3) late-stage formation of lizardite ± brucite and chrysotile (D= –127 to –175%.) due to infiltration of meteoric waters. Abundant relict phases indicate incomplete reactions and strongly suggest that the availability of H2O was a controlling factor during serpentinization.Antigorite (event 1) formed as a result of infiltration into the Trinity peridotite of mixed H2O-CO2 fluids derived from the underlying central metamorphic belt. Foliation defined by magnetite veins and shear zones within antigorite serpentinites are subparallel to the Trinity thrust. The assemblage Fo + Atg + Chl + Mag ± Tr ± Carb reflects partial hydration of peridotite at 425–570° C. Talc-rich serpentinite formed along the thrust as a result of the infiltration of silica-bearing fluids. Metasomatic mass-balance calculations based on silica solubilities and the extent of antigorite serpentinization suggest that 80–175 volumes of fluid have passed through a given volume of original peridotite at the Trinity thrust.The Trinity thrust probably represents a Devonian subduction zone. Thermodynamic calculations suggest that hydration reactions account for 30–35% of the total heat released by the cooling Trinity peridotite. By analogy, similar hydration reactions are to be expected in the overlying mantle wedge of a subduction zone which act to retard cooling of the hanging wall, just as dehydration reactions delay heating of the downgoing slab. Metasomatic zones formed in peridotite at the Trinity thrust may reflect similar metasomatic processes to those proposed to occur in the mantle wedge above a subducting slab.  相似文献   

18.
Marble-hosted ruby deposits represent the most important source of colored gemstones from Central and South East Asia. These deposits are located in the Himalayan mountain belt which developed during Tertiary collision of the Indian plate northward into the Eurasian plate. They are spatially related to granitoid intrusions and are contained in platform carbonates series that underwent high-grade metamorphism. All occurrences are located close to major tectonic features formed during Himalayan orogenesis, directly in suture zones in the Himalayas, or in shear zones that guided extrusion of the Indochina block after the collision in South East Asia. Ar–Ar dating of micas syngenetic with ruby and U–Pb dating of zircon included in ruby gives evidence that these deposits formed during Himalayan orogenesis, and the ages document the extensional tectonics that were active, from Afghanistan to Vietnam, between the Oligocene and the Pliocene.The petrography shows that ruby-bearing marbles formed in the amphibolite facies (T = 610 to 790 °C and P ~ 6 kbar). A fluid inclusion study defines the conditions of gem ruby formation during the retrograde metamorphic path (620 < T < 670 °C and 2.6 < P < 3.3 kbar) for the deposits of Jegdalek, Hunza and northern Vietnam.Whole rock analyses of non-ruby-bearing marbles indicate that they contain enough aluminum and chromiferous elements to produce all the ruby crystals that they contain. In addition, (C, O)-isotopic analyses of carbonates from the marbles lead to the conclusion that the marbles acted as a metamorphic closed fluid system that were not infiltrated by externally-derived fluids. The carbon isotopic composition of graphite in marbles reveals that it is of organic origin and that it exchanged C-isotopes with the carbonates during metamorphism. Moreover, the O-isotopic composition of ruby was buffered by metamorphic CO2 released during devolatilisation of marble and the H-isotopic composition of mica is consistent with a metamorphic origin for water in equilibrium with the micas. The (C, O, H)-isotopic compositions of minerals associated with marble-hosted ruby are all in agreement with the hypothesis, drawn from the unusual chemistry of CO2–H2S–COS–S8–AlO(OH)-bearing fluids contained in fluid inclusions, that gem ruby formed at P ~ 3 kbar and 620 < T < 670 °C, during thermal reduction of evaporite by organic matter, at high temperature-medium pressure metamorphism of platform carbonates during the Tertiary India–Asia collision. The carbonates were enriched in Al- and chromiferous-bearing detrital minerals, such as clay minerals that were deposited on the platform with the carbonates, and in organic matter. Ruby formed during the retrograde metamorphic path, mainly by destabilization of muscovite or spinel. The metamorphic fluid system was rich in CO2 released from devolatilisation of carbonates, and in fluorine, chlorine and boron released by molten salts (NaCl, KCl, CaSO4). Evaporites are key to explaining the formation of these deposits. Molten salts mobilized in situ Al and metal transition elements contained in marbles, leading to crystallization of ruby.  相似文献   

19.
We evaluate the pressure–temperature (P–T) conditions of ongoing regional metamorphism at the top of the oceanic crust of the subducted Pacific and Philippine Sea plates through a combination of phase diagrams and hypocenter distribution and based on the dehydration-induced earthquake hypothesis. The brute-force method was employed to find the best match thermal structure to link the hypocenter distribution and dehydration. The estimated thermal structure varies far from the values obtained from numerical simulation. Our estimates are consistent with the qualitative physical prediction for the variation of temperature in different subduction zones and provide quantitative constraints for the models.In northeastern Japan, the P–T path for the top of the oceanic crust turns to the high-T side at a depth of around 90 km. The depth corresponds to the location of the volcanic front and an active convection of the wedge mantle below this depth is suggested. Our computations also reveal the effect of an exceptional scenario beneath the Kanto region. The temperature in the Kanto region, where the cold lid of the Philippine Sea plate prevents heating by the return-flow of mantle wedge above, is much lower than that of northeastern Japan. The subduction of younger Philippine Sea plate leads to a higher-temperature in the oceanic crust. In the central Shikoku region, the thermal structure exhibits high-T/P nature. Heating by shear deformation can explain the high-T/P path in the depth range from 20 to 35 km. The Kyushu area shows moderate type T/P path reaching up to eclogite facies conditions. In the Kii and central Shikoku region, the thermal structure exhibits high-T/P nature. However, the absolute values for the areas seem to have problem in physical context. Our results has risen the significance of sediment subduction in the southwest Japan and requirement for further improvements in this technique including the aspect of variation of the bulk composition of the subducted material.  相似文献   

20.
The methamorphic history of the Patapedia thermal zone, Gaspé, Quebec, is re-evaluated in the light of results obtained from a study of fluid inclusions contained in quartz phenocrysts of felsic dyke rocks. The thermal zone is characterised by calc-silicate bodies that have outwardly telescoping prograde metamorphic isograds and display extensive retrograde metamorphism with associated copper mineralization. Three distinct fluid inclusion types are recognized: a low to moderate salinity, high density aqueous fluid (Type I); a low density CO2 fluid (Type II); and a high salinity, high density aqueous fluid (Type III). Fluid inclusion Types I and II predominate whereas Type III inclusions form <10% of the fluid inclusion population. All three fluid types are interpreted to have been present during prograde metamorphism. Temperatures and pressures of metamorphism estimated from fluid inclusion microthermometry and isochore calculations are 450°–500° C and 700–1000 bars, respectively. A model is proposed in which the metamorphism at Patapedia was caused by heat transferred from a low to moderate salinity fluid of partly orthomagmatic origin (Type I inclusions). During the early stages, and particularly in the deeper parts of the system, CO2 produced by metamorphism was completely miscible in the aqueous hydrothermal fluid and locally resulted in high XCO2 fluids. On cooling and/or migrating to higher levels these latter fluids exsolved high salinity aqueous fluids represented by the Type III inclusions. Most of the metamorphism, however, took place at temperature-pressure conditions consistent with the immiscibility of CO2 and the hydrothermal fluid and was consequently accompanied by the release of large volumes of CO2 vapour which is represented by Type II inclusions. The final stage of the history of the Patapedia aureole was marked by retrograde metamorphism and copper mineralization of a calcite-free calc-silicate hornfels in the presence of a low XCO2 fluid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号