首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 70 毫秒
1.
The Jason-1 satellite altimeter mission represents a first step towards operational oceanography from satellite altimeter missions. An operational data product, the Operational Sensor Data Record (OSDR), provides measurements from the on-board altimeter and radiometer within 3-5 h of real time. This data product is a wind and wave product that is aimed towards near-real-time meteorological applications. A higher accuracy and more detailed data product, the Interim Geophysical Data Record (IGDR), that is better suited to detailed scientific studies of ocean topography, is available no sooner than 2-3 days from real time. The measurements reported on the OSDR primarily differ from those on the IGDR in that the OSDR reports measurements derived from on-board processing of the altimeter waveforms, while ground retracking of the waveforms is performed for the IGDR. The altimeter-derived measurements on the OSDR are validated through a statistical evaluation of the differences between data on the OSDR and IGDR. In doing so, the impact of ground retracking of the altimeter waveforms is also illustrated.  相似文献   

2.
《Marine Geodesy》2013,36(3-4):201-238
TOPEX/Poseidon is a well known success, with the operational altimeter (TOPEX) and the experimental one (Poseidon-1), providing data of unprecedented quality. However, there are two major differences between the TOPEX and Poseidon-1 radar altimeters on board TOPEX/Poseidon. The first is related to the estimated range noise; the second is linked to the sea-state bias (SSB) model estimates. Since the recent launch of the Jason-1 radar altimeter (also called Poseidon-2), we have been cross-comparing these three systems to better characterize each of them. Analyzing standard user products, we have found that Jason-1 is behaving like Poseidon-1 and thus shows the same observed differences when compared with TOPEX. A comparative analysis of their features was performed, starting from the on-board acquisition of the ocean return and ending with the ground generation of the high level accuracy oceanographic product. The results lead us to believe that the sources for these differences lie in both the waveform tracking processing and the presence or abscence of a retracking procedure whether on-board or on ground. Because Poseidon-1 and Jason-1 waveforms are retracked while TOPEX waveforms are not in the products distributed to the users, we have applied the same ground retracking algorithm to the waveforms of the three radar altimeters to get consistent data sets. The analysis of the outputs has shown that: (a) the noise level for the three radar altimeters is definitively the same, and (b) the source of the relative SSB between Jason-1 and TOPEX lies in the different behavior of the on-board tracking softwares.  相似文献   

3.
TOPEX/Poseidon is a well known success, with the operational altimeter (TOPEX) and the experimental one (Poseidon-1), providing data of unprecedented quality. However, there are two major differences between the TOPEX and Poseidon-1 radar altimeters on board TOPEX/Poseidon. The first is related to the estimated range noise; the second is linked to the sea-state bias (SSB) model estimates. Since the recent launch of the Jason-1 radar altimeter (also called Poseidon-2), we have been cross-comparing these three systems to better characterize each of them. Analyzing standard user products, we have found that Jason-1 is behaving like Poseidon-1 and thus shows the same observed differences when compared with TOPEX. A comparative analysis of their features was performed, starting from the on-board acquisition of the ocean return and ending with the ground generation of the high level accuracy oceanographic product. The results lead us to believe that the sources for these differences lie in both the waveform tracking processing and the presence or abscence of a retracking procedure whether on-board or on ground. Because Poseidon-1 and Jason-1 waveforms are retracked while TOPEX waveforms are not in the products distributed to the users, we have applied the same ground retracking algorithm to the waveforms of the three radar altimeters to get consistent data sets. The analysis of the outputs has shown that: (a) the noise level for the three radar altimeters is definitively the same, and (b) the source of the relative SSB between Jason-1 and TOPEX lies in the different behavior of the on-board tracking softwares.  相似文献   

4.
Poseidon-2 is the dual frequency radar altimeter embarked on the CNES/NASA oceanographic satellite Jason-1 that was launched on 7 December 2001. The primary objective of the Jason-1 mission is to continue the high accuracy time series of altimeter measurements that began with TOPEX in 1992. To achieve this goal, it is necessary to improve each component of the ground processing continually. Among these components are the look-up correction tables that are used to correct the estimations (range, significant waveheight, and sigma naught) issued from the retracking algorithms (on-board and ground). Look-up tables were first computed taking into account the prelaunch characteristics of the altimeter. They have to be updated to take into account better all the in-flight characteristics of the altimeter and all the updated ground algorithms that can impact the estimation process. The aim of this article is to describe the radar altimeter simulator of performances that has been used to compute look-up tables, to display the freshly computed look-up tables, and to discuss the consequences of these new corrections on the products provided to the users. The updated look-up correction tables allow improvement of SWH estimation, in particular with respect to TOPEX SWH data. It is also shown that no range dependency on SWH has to be looked for in these tables, and that the on-board TOPEX and Poseidon-2 tracking systems may contain the differences explaining the relative sea state bias between both altimeters.  相似文献   

5.
Jason-1 Altimeter Ground Processing Look-Up Correction Tables   总被引：1，自引：0，他引：1  
Poseidon-2 is the dual frequency radar altimeter embarked on the CNES/NASA oceanographic satellite Jason-1 that was launched on 7 December 2001. The primary objective of the Jason-1 mission is to continue the high accuracy time series of altimeter measurements that began with TOPEX in 1992. To achieve this goal, it is necessary to improve each component of the ground processing continually. Among these components are the look-up correction tables that are used to correct the estimations (range, significant waveheight, and sigma naught) issued from the retracking algorithms (on-board and ground). Look-up tables were first computed taking into account the prelaunch characteristics of the altimeter. They have to be updated to take into account better all the in-flight characteristics of the altimeter and all the updated ground algorithms that can impact the estimation process. The aim of this article is to describe the radar altimeter simulator of performances that has been used to compute look-up tables, to display the freshly computed look-up tables, and to discuss the consequences of these new corrections on the products provided to the users. The updated look-up correction tables allow improvement of SWH estimation, in particular with respect to TOPEX SWH data. It is also shown that no range dependency on SWH has to be looked for in these tables, and that the on-board TOPEX and Poseidon-2 tracking systems may contain the differences explaining the relative sea state bias between both altimeters.  相似文献   

6.
Retracking of Jason-1 Data   总被引：1，自引：0，他引：1  
We present the results of retracking 18 cycles (15 from the Jason-TOPEX collinear period) of Jason-1 data. We used the retracking method of Rodriguez which simultaneously solves for all relevant waveform parameters using a 26 Gaussian model of the altimeter point target response. We find significant differences from the Jason-1 Project retracking in the key parameters of range and significant wave height (SWH) in the second version of the Project SGDRs. The differences from the Jason-1 data have a strong dependence on off-nadir angle and some dependence on SWH. The dependence of range on SWH is what is called sea state bias. The retracking technique also estimates surface skewness. For Jason-1 with its very clean waveforms we make the first direct estimates of the skewness effect on altimeter data. We believe that the differences found here and thus in overall sea surface height are the result of the standard project processing using a single Gaussian approximation to the Point Target Response (PTR) and not solving simultaneously for off nadir angle. We believe that the relatively large sea state bias errors estimated empirically for Jason-1 during the cal/val phase result from sensitivity of quantities, particularly SWH, in project GDRs to off nadir angle. The TOPEX-Jason-1 bias can be determined only when a full retracking of Jason-1 is done for the collinear period.  相似文献   

7.
We present the results of retracking 18 cycles (15 from the Jason-TOPEX collinear period) of Jason-1 data. We used the retracking method of Rodriguez which simultaneously solves for all relevant waveform parameters using a 26 Gaussian model of the altimeter point target response. We find significant differences from the Jason-1 Project retracking in the key parameters of range and significant wave height (SWH) in the second version of the Project SGDRs. The differences from the Jason-1 data have a strong dependence on off-nadir angle and some dependence on SWH. The dependence of range on SWH is what is called sea state bias. The retracking technique also estimates surface skewness. For Jason-1 with its very clean waveforms we make the first direct estimates of the skewness effect on altimeter data. We believe that the differences found here and thus in overall sea surface height are the result of the standard project processing using a single Gaussian approximation to the Point Target Response (PTR) and not solving simultaneously for off nadir angle. We believe that the relatively large sea state bias errors estimated empirically for Jason-1 during the cal/val phase result from sensitivity of quantities, particularly SWH, in project GDRs to off nadir angle. The TOPEX-Jason-1 bias can be determined only when a full retracking of Jason-1 is done for the collinear period.  相似文献   

8.
After two years of verification and validation activities of the Jason-1 altimeter data, it appears that all the mission specifications are completely fulfilled. Performances of all instruments embarked onboard the platform meet all the requirements of the mission. However, the star tracker system has shown some occasional abnormal behavior leading to mispointing angles out of the range of Jason-1 system specification which states that the altimeter antenna shall be pointed to the nadir direction with an accuracy below 0.2 degree (3 sigma). This article discusses the platform attitude angle and its consequences on the altimetric estimates. We propose improvements of the Jason-1 retracking process to better account for attitude effects.

The first star tracker anomalies for the Jason-1 mission were detected in April 2002. The Poseidon-2 algorithms were specified assuming an antenna off-nadir angle smaller than 0.3 degree. For higher values, the current method to estimate the ocean parameters is known to be inaccurate. Thus, the algorithm has to be reviewed, and more specifically, the present altimeter echo model has to be modified to meet the desired instrument performance.

Therefore, we derive a second order analytical model of the altimeter echo to take into account attitude angles up to 0.8 degree, and consequently, we adapt the retracking algorithm. This new model is tested on theoretical simulated data using a maximum likelihood estimation. Biases and noise performance characteristics are computed for the different estimated parameters. They are compared to the ones obtained with the current algorithm. This new method provides highly improved estimations for high attitude angles. It is statistically validated on real data by applying it on several cycles of Poseidon-2 raw measurements. The results are found to be consistent with those obtained from simulations. They also fully agree with the TOPEX estimates when flying along the same ground track. Finally, the estimates are also in agreement with the ones available in the current I/GDR (Intermediate Geophysical Data Record) products when mispointing lies in the mission specifications.  相似文献   

9.
After two years of verification and validation activities of the Jason-1 altimeter data, it appears that all the mission specifications are completely fulfilled. Performances of all instruments embarked onboard the platform meet all the requirements of the mission. However, the star tracker system has shown some occasional abnormal behavior leading to mispointing angles out of the range of Jason-1 system specification which states that the altimeter antenna shall be pointed to the nadir direction with an accuracy below 0.2 degree (3 sigma). This article discusses the platform attitude angle and its consequences on the altimetric estimates. We propose improvements of the Jason-1 retracking process to better account for attitude effects.

The first star tracker anomalies for the Jason-1 mission were detected in April 2002. The Poseidon-2 algorithms were specified assuming an antenna off-nadir angle smaller than 0.3 degree. For higher values, the current method to estimate the ocean parameters is known to be inaccurate. Thus, the algorithm has to be reviewed, and more specifically, the present altimeter echo model has to be modified to meet the desired instrument performance.

Therefore, we derive a second order analytical model of the altimeter echo to take into account attitude angles up to 0.8 degree, and consequently, we adapt the retracking algorithm. This new model is tested on theoretical simulated data using a maximum likelihood estimation. Biases and noise performance characteristics are computed for the different estimated parameters. They are compared to the ones obtained with the current algorithm. This new method provides highly improved estimations for high attitude angles. It is statistically validated on real data by applying it on several cycles of Poseidon-2 raw measurements. The results are found to be consistent with those obtained from simulations. They also fully agree with the TOPEX estimates when flying along the same ground track. Finally, the estimates are also in agreement with the ones available in the current I/GDR (Intermediate Geophysical Data Record) products when mispointing lies in the mission specifications.  相似文献   

10.
中国近岸海域高度计JASON-1测量数据的波形重构算法研究   总被引：3，自引：1，他引：2  
卫星雷达高度计的测量数据目前已被广泛应用于各个领域,但高度计在近海的测量数据却一直不可用,一方面是因为高度计在近岸海域的回波波形测量受陆地回波的影响,另一方面是因为一些校正量对近海不准确,如大气湿对流层校正、海洋潮汐校正以及大气高频因数校正等。通过对高度计在近海测量的回波波形进行重构处理,可以缩短近海数据不可用的距离,提高数据的数量和质量。以我国海域及邻近海域(14°~45°N,105°~130°E)为研究区域,采用四种波形重构算法(海洋算法、重力中心偏离算法、冰层算法二和阈值算法)对JASON-1高度计1 a共31个周期的测量波形重新进行了计算,比较了轨道交叉点处升轨和降轨的海面高度异常值以及海面高度值与验潮站的实测水位,结果表明重力中心偏离法比其他三种算法更适合我国近海的测高波形重构:计算结果精度最高,有效数目最多。  相似文献   

11.
Haiyang-2A(HY-2A) is China's first ocean dynamic environment satellite and the radar altimeter is one of its main payloads. One of the main purposes of the radar altimeter is to measure the sea surface height(SSH). The SSH determined from the altimeter range measurements includes some range and geophysical corrections. These corrections largely affect the accuracy of the SSH measurements. The range and the geophysical corrections are reprocessed and the altimeter waveforms in HY-2A sensor interim geophysical data set records(S-IGDR) are retracked from June 1, 2014 to June 14, 2014, and the accuracy of the reprocessed SSH measurements is evaluated.The methods of the range and geophysical corrections used to reprocess HY-2A altimeter data are validated by using these methods to reprocess the Jason-2 range and geophysical corrections and comparing the results with the range and geophysical corrections in Jason-2 geophysical dataset records(GDR) product. A crossover analysis is used to evaluate the accuracy of the reprocessed HY-2A SSH measurements. The standard deviation(STD) of the crossover SSH differences for HY-2A is around 4.53 cm while the STD of the SSH differences between HY-2A and Jason-2 is around 5.22 cm. The performance of the reprocessed HY-2A SSH measurements is significantly improved with respect to the SSH measurements derived from HY-2A interim geophysical dataset records(IGDR)product. The 2015–2016 El Ni?o has been the strongest El Ni?o event since 1997–1998. The range and the geophysical corrections in HY-2A IGDR are reprocessed and sea level anomalies are used to monitor the2015–2016 El Ni?o. The results show that the HY-2A altimeter can well observe the 2015–2016 El Ni?o.  相似文献   

12.
针对拟开展的Jason-3卫星高度计定标试验,分析了利用IGDR数据先期计算定标结果的可行性。介绍了基于GPS浮标的直接绝对定标方法,设计了IGDR数据用于定标计算的可行性评估方法,利用经过全球4大定标站海域的数据比较了IGDR、GDR数据计算定标结果的差异。结果表明:通过两种数据计算的定标结果之间没有明显的系统性偏差,其差异的不确定性约为1cm;相对于传统定标站GDR定标结果 3cm量级的标准差,该不确定性对于定标结果的一致性影响不大,在定标试验中可使用IGDR先期进行定标计算。  相似文献   

13.
《Marine Geodesy》2013,36(3-4):383-397
The Jason-1 Operational Sensor Data Record (OSDR) is intended as a wind and wave product that is aimed towards near-real–time (NRT) meteorological applications. However, the OSDR provides most of the information that is required to determine altimetric sea surface heights in NRT. The exceptions include a sufficiently accurate orbit altitude, and pressure fields to determine the dry troposphere path delay correction. An orbit altitude field is provided on the OSDR but has accuracies that range between 8–25 cm (RMS). However, tracking data from the on-board BlackJack GPS receiver are available with sufficiently short latency for use in the computation of NRT GPS-based orbit solutions. The orbit altitudes from these NRT orbit solutions have typical accuracies of < 3.0 cm (RMS) with a latency of 1–3 h, and < 2.5 cm (RMS) with a latency of 3–5 h. Meanwhile, forecast global pressure fields from the National Center for Environmental Prediction (NCEP) are available for the NRT computation of the dry troposphere correction. In combination, the Jason-1 OSDR, the NRT GPS-based orbit solutions, and the NCEP pressure fields can be used to compute sea surface height observations from the Jason-1 mission with typical latencies of 3–5 h, and have differences with those from the 2–3 day latency Interim Geophysical Data Records of < 5 cm (RMS). The NRT altimetric sea surface height observations are potentially of benefit to forecasting, tactical oceanography, and natural hazard monitoring.  相似文献   

14.
HY-2卫星雷达高度计时标偏差估算   总被引：2，自引：0，他引：2  
卫星雷达高度计是海洋遥感监测的重要传感器之一,测高系统和定轨系统是高度计重要的组成部分。若两系统使用不同的系统时钟,则获得的轨道高度和卫星测距值之间可能会存在一个时标偏差,该时标偏差会降低卫星雷达高度计的海面高度测量精度。针对HY-2卫星雷达高度计的时标偏差问题,本文分析了时标偏差对测高精度的影响,介绍了一种使用自交叉点数据估算时标偏差值的方法,并基于HY-2卫星雷达高度计第21个周期数据开展了时标偏差修正实验。时标偏差修正后HY-2自交叉点的海面高度差值(也称"不符值")分布收敛程度有了明显的提高,其RMS均方根值从24.7 cm减小到了7.0 cm,HY-2与Jason-2互交叉点的不符值的RMS也从16.6 cm减小到了7.3 cm。这表明本文介绍的时标偏差修正方法可有效地提高HY-2卫星雷达高度计的测高精度。  相似文献   

15.
HY-2A卫星雷达高度计数据的全球统计评价及质量分析   总被引：6，自引：4，他引：2  
自HY-2A卫星发射以来,针对HY-2A卫星雷达高度计产品的交叉定标、真实性检验及质量评估工作一直在持续开展。本文主要以HY-2A卫星高度计第44周期的IGDR产品数据为例,通过使用全球分布图、二维直方图和每日均值统计的方法完成了与Jason-2IGDR产品的比对验证,同时对主要环境校正参数及地球物理产品的数据质量稳定性进行了分析,结果显示高度计产品数据质量较稳定,此外利用HY-2A卫星升降轨交叉点海面高度差、与Jason-2卫星交叉点海面高度差以及沿轨海平面异常数据分析的方法进行了HY-2A卫星高度计观测系统的性能评估,结果显示,HY-2A卫星海面高度精度约为7.48cm,精度接近Jason-2,能满足海洋应用与科学研究的需要。  相似文献   

16.
《Marine Geodesy》2013,36(3-4):367-382
The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. Here we examine simultaneous significant wave height measurements by the Jason-1 and TOPEX/Poseidon altimeters. These data are also compared with in situ measurements from deep-ocean buoys and with predicted wave heights from the Wave Watch III operational model. The rms difference between Jason and TOPEX wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding TOPEX by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between TOPEX and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that TOPEX wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5 m; Jason heights in general are 3% smaller than TOPEX. Spurious dips in the TOPEX density function for 3- and 6-m waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.  相似文献   

17.
《Marine Geodesy》2013,36(3-4):399-421
The Jason-1 radar altimeter satellite, launched on December 7, 2001 is the follow on to the highly successful TOPEX/Poseidon (T/P) mission and will continue the time series of centimeter level ocean topography measurements. Orbit error is a major component in the overall error budget of all altimeter satellite missions. Jason-1 is no exception and has set a 1-cm radial orbit accuracy goal, which represents a factor of two improvement over what is currently being achieved for T/P. The challenge to precision orbit determination (POD) is both achieving the 1-cm radial orbit accuracy and evaluating the performance of the 1-cm orbit. There is reason to hope such an improvement is possible. The early years of T/P showed that GPS tracking data collected by an on-board receiver holds great promise for precise orbit determination. In the years following the T/P launch there have been several enhancements to GPS, improving its POD capability. In addition, Jason-1 carries aboard an enhanced GPS receiver and significantly improved SLR and DORIS tracking systems along with the altimeter itself. In this article we demonstrate the 1-cm radial orbit accuracy goal has been achieved using GPS data alone in a reduced dynamic solution. It is also shown that adding SLR data to the GPS-based solutions improves the orbits even further. In order to assess the performance of these orbits it is necessary to process all of the available tracking data (GPS, SLR, DORIS, and altimeter crossover differences) as either dependent or independent of the orbit solutions. It was also necessary to compute orbit solutions using various combinations of the four available tracking data in order to independently assess the orbit performance. Towards this end, we have greatly improved orbits determined solely from SLR+DORIS data by applying the reduced dynamic solution strategy. In addition, we have computed reduced dynamic orbits based on SLR, DORIS, and crossover data that are a significant improvement over the SLR- and DORIS-based dynamic solutions. These solutions provide the best performing orbits for independent validation of the GPS-based reduced dynamic orbits. The application of the 1-cm orbit will significantly improve the resolution of the altimeter measurement, making possible further strides in radar altimeter remote sensing.  相似文献   

18.
The Jason-1 satellite was launched on 7 December 2001 with the primary objective of continuing the high accuracy time series of altimeter measurements that began with the TOPEX/Poseidon mission in 1992. To achieve this goal, it is necessary to validate the performance of the Jason-1 measurement system, and to verify that its error budget is at least at the same level as that of the TOPEX/Poseidon mission. The article reviews the main components of the Jason-1 altimetric error budget from instrument characterization to the geophysical use of the data. Using the Interim Geophysical Data Records (16DR) that were distributed to the Jason-1 Science Working Team during the verification phase of the mission, it is shown that the Jason-1 mission is performing well enough to continue studies of the large-scale features of the ocean, and especially to continue time series of mean sea-level variations with an accuracy comparable to TOPEX/Poseidon.  相似文献   

19.
神舟四号高度计波形数据预处理和信息提取   总被引：1，自引：0，他引：1  
神舟四号(SZ-4)高度计在国内首次提供了星载雷达高度计回波波形数据.本文中作者分析了SZ-4高度计回波波形的特点,完成波形数据的预处理,并在此基础上完成初步的信息提取.在数据预处理方面,通过SZ-4高度计水陆边界处波形的特点,提出了波形最大幅度控制的方法,筛选回波波形.在波形归一化处理过程中,发现SZ-4高度计波形中存在双峰现象,并指出第二个峰为异常波形区.在波形信息提取方面,利用波形重新跟踪得到的半功率点计算出SZ-4高度计高度跟踪补偿误差,并根据高度计天线指向角和回波波形下降沿斜率之间的关系,从波形后沿提取天线指向角信息.分析结果表明,SZ-4高度计天线指向比较平稳,而跟踪补偿由于变化较大,在计算海面高度时,应作为一项误差源被考虑到.  相似文献   

20.
The Jason-1 radar altimeter satellite, launched on December 7, 2001 is the follow on to the highly successful TOPEX/Poseidon (T/P) mission and will continue the time series of centimeter level ocean topography measurements. Orbit error is a major component in the overall error budget of all altimeter satellite missions. Jason-1 is no exception and has set a 1-cm radial orbit accuracy goal, which represents a factor of two improvement over what is currently being achieved for T/P. The challenge to precision orbit determination (POD) is both achieving the 1-cm radial orbit accuracy and evaluating the performance of the 1-cm orbit. There is reason to hope such an improvement is possible. The early years of T/P showed that GPS tracking data collected by an on-board receiver holds great promise for precise orbit determination. In the years following the T/P launch there have been several enhancements to GPS, improving its POD capability. In addition, Jason-1 carries aboard an enhanced GPS receiver and significantly improved SLR and DORIS tracking systems along with the altimeter itself. In this article we demonstrate the 1-cm radial orbit accuracy goal has been achieved using GPS data alone in a reduced dynamic solution. It is also shown that adding SLR data to the GPS-based solutions improves the orbits even further. In order to assess the performance of these orbits it is necessary to process all of the available tracking data (GPS, SLR, DORIS, and altimeter crossover differences) as either dependent or independent of the orbit solutions. It was also necessary to compute orbit solutions using various combinations of the four available tracking data in order to independently assess the orbit performance. Towards this end, we have greatly improved orbits determined solely from SLR+DORIS data by applying the reduced dynamic solution strategy. In addition, we have computed reduced dynamic orbits based on SLR, DORIS, and crossover data that are a significant improvement over the SLR- and DORIS-based dynamic solutions. These solutions provide the best performing orbits for independent validation of the GPS-based reduced dynamic orbits. The application of the 1-cm orbit will significantly improve the resolution of the altimeter measurement, making possible further strides in radar altimeter remote sensing.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号