首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
Abstract– Hypervelocity (2.5–7.8 km s?1) impact experiments into sandstone were carried out to investigate the influence of projectile velocity and mass, target pore space saturation, target‐projectile density contrast, and target layer orientation on crater size and shape. Crater size increases with increasing projectile velocity and mass as well as with increasing target pore space saturation. Craters in water‐saturated porous targets are generally shallower and larger in volume and in diameter than craters from equivalent impacts into dry porous sandstone. Morphometric analyses of the resultant craters, 5–40 cm in diameter, reveal features that are characteristic of all of our experimental craters regardless of impact conditions (I) a large central depression within a fragile, light‐colored central part, and (II) an outer spallation zone with areas of incipient spallation. Two different mechanical processes, grain fragmentation and intergranular tensile fracturing, are recorded within these crater morphologies. Zone (I) approximates the shape of the transient crater formed by material compression, displacement, comminution, and excavation flow, whereas (II) is the result of intergranular tensile fracturing and spallation. The transient crater dimensions are reconstructed by fitting quadric parabolas to crater profiles from digital elevation models. The dimensions of this transient and of the final crater show the same trends: both increase in volume with increasing impact energy, and with increasing water saturation of the target pore space. The relative size of the transient crater (in percent of the final crater volume) decreases with increasing projectile mass and velocity, signifying a greater contribution of spallation on the final crater size when projectile mass and velocity are increased.  相似文献   

2.
Cover     
Cover: Top left: Numerical model of an impact into a sandstone target. The simulation is an iSALE model that uses a material model developed and validated in MEMIN for wet and dry porous sandstones. In this simulation, 25% water saturation of the pore space is modeled. Top right: Plan view of an 18 cm diameter impact crater formed in sandstone by a 1 cm steel projectile at 3.4 km/s. (Experiment 3232) Bottom left: A high speed image of an impact of a 1.2 cm iron meteorite at 4.6 km/s into a 50% water‐saturated sandstone target (Experiment E3‐3384). The image (3.36 microseconds after impact) shows a well‐developed ejecta cone that has transitioned into the “ejecta tube,” a phenomenon that may be connected to pressure wave refl ections in the target. (High speed video courtesy of Fraunhofer EMI.) Bottom right: The experimental setup of a cratering experiment at Fraunhofer EMI’s “Space” light gas gun. The photo shows the target chamber after experiment A11‐5181. The back of a 20 cm sandstone cube that was saturated with water to 90% is visible. Three different types of ultrasound and pressure sensors are attached to the target’s surfaces that measured the pressure wave of the impact. In the background, an “ejecta catcher”, composed of Vaseline‐coated tiles and phenolic foam blocks, shows an imprint of the ejecta cone. (Photograph courtesy of Fraunhofer EMI.)  相似文献   

3.
Abstract– This study deals with the investigation of highly dynamic processes associated with hypervelocity impacts on porous sandstone. For the impact experiments, two light‐gas accelerators with different calibers were used, capable of accelerating steel projectiles with diameters ranging from 2.5 to 12 mm to several kilometers per second. The projectiles impacted on dry and water‐saturated Seeberger Sandstone targets. The study includes investigations of the influence of pore water on the shape of the ejecta cloud as well as transient crater growth. The results show a significant influence of pore water on ejecta behavior. Steeper ejecta cone angles are observed if the impacts are conducted on wet sandstones. The transient crater grows at a faster rate and reaches a larger diameter if the target is water saturated. In our experiments, target porosity leads to smaller crater sizes compared with nonporous targets. Water within the pore space reduces porosity and counteracts this process. Power law fits were applied to the crater growth curves. The results show an increase in the scaling exponent μ with increasing pore space saturation.  相似文献   

4.
Abstract– We carried out hypervelocity cratering experiments with steel projectiles and sandstone targets to investigate the structural and mineralogical changes that occur upon impact in the projectile and target. The masses of coherent projectile relics that were recovered in different experiments ranged between 58% and 92% of their initial projectile masses. A significant trend between impact energy, the presence of water in the target, and the mass of projectile relics could not be found. However, projectile fragmentation seems to be enhanced if the target contains substantial amounts of water. Two experiments that were performed with 1 cm sized steel projectiles impacting at 3400 and 5300 m s?1 vertically onto dry Seeberger sandstone were investigated in detail. The recovered projectiles are intensely plastically deformed. Deformation mechanisms include dislocation glide and dislocation creep. The latter led to the formation of subgrains and micrometer‐sized dynamically recrystallized grains. In case of the 5300 m s?1 impact experiment, this deformation is followed by grain annealing. In addition, brittle fracturing and friction‐controlled melting at the surface along with melting and boiling of iron and silica were observed in both experiments. We estimated that heating and melting of the projectile impacting at 5300 m s?1 consumed 4.4% of the total impact energy and was converted into thermal energy and heat of fusion. Beside the formation of centimeter‐sized projectile relics, projectile matter is distributed in the ejecta as spherules, unmelted fragments, and intermingled iron‐silica aggregates.  相似文献   

5.
Abstract— Scaling laws describing crater dimensions are defined in terms of projectile velocity and mass, densities of the materials involved, strength of the target, and the local gravity. Here, the additional importance of target porosity and saturation, and an overlying water layer, are considered through 15 laboratory impacts of 1 mm diameter stainless steel projectiles at 5 km s?1 into a) an initially uncharacterized sandstone (porosity ?17%) and b) Coconino Sandstone (porosity ?23%). The higher‐porosity dry sandstone allows a crater to form with a larger diameter but smaller depth than in the lower‐porosity dry sandstone. Furthermore, for both porosities, a greater volume of material is excavated from a wet target than a dry target (by 27–30%). Comparison of our results with Pi‐scaling (dimensionless ratios of key parameters characterizing cratering data over a range of scales) suggests that porosity is important for scaling laws given that the new data lie significantly beneath the current fit for ice and rock targets on a πv versus π3 plot (πv gives cratering efficiency and π3 the influence of target strength). An overlying water layer results in a reduction of crater dimensions, with larger craters produced in the saturated targets compared to unsaturated targets. A water depth of approximately 12 times the projectile diameter is required before craters are no longer observed in the targets. Previous experimental studies have shown that this ratio varies between 10 and 20 (Gault and Sonett 1982). In our experiments ?25% of the original projectile mass survives the impact.  相似文献   

6.
Hypervelocity microparticle impact experiments were performed with a 2 MV Van De Graaff dust accelerator. From measurements of the light intensity I and the total light energy E, the relations I=c1mv4.1 and E=c2mv3.2 were obtained, where m is the projectile mass, ν the projectile velocity and c1,c2 are constants, depending on projectile and target material. Using the measured values of the spectral distribution of the light emitted during impact, the temperature of the radiating material was estimated to be between 2500 and 5000 K depending on the projectile velocity. From an analysis of these measurements the angular distribution of secondary particle velocities as well as the relative mass distribution of these particles was determined. Approximately 90% of the detected ejecta mass (ν?1 km/sec) is found between 50° and 70° ejection angle. For ejection angles smaller than 20°, ejecta velocities of up to 30 km/sec were detected when the primary particle velocity was 4.8 km/sec. Using the dependence of the light intensity on pressure in the target chamber, an estimate of the total amount of material vaporized during impact could be derived. It was concluded that at 7.4 km/sec particle impact velocity at least 1.6% of the displaced projectile and crater material was vaporized.  相似文献   

7.
The influence of different projectile and target characteristics on the mass and velocity of high-velocity (>1 km/s) ejecta from impact craters is investigated numerically. The problem of how the computation accuracy affects the resulting ejection velocity distribution is considered.  相似文献   

8.
We carried out 16 collision experiments in the drop tower in Bremen, Germany. Dust projectiles and solid projectiles of several mm in size impacted a dust target 5 cm in depth and width at velocities between 3.5 and 21.5 m/s. For solid impactors we found significant mass loss on the front (impact) side of the target. Mass loss depended on the impact velocity and projectile type (solid sphere or dust) and was up to 35 times the projectile mass for targets of the lowest tensile strength. Typical fragment velocities on the front side of the target ranged from 3 to 12 cm/s. The ejecta velocity was independent of the impact velocity but it increased with projectile mass. On the back side of the target (opposite to the impact side) mass was ejected from the target above a certain threshold impact velocity. Ejection velocity on the back side increased with impact velocity and is larger for solid projectiles than for dust projectiles. In one case a slightly stronger target gained mass in a slow dust-dust collision. We verified that collisions of dust projectiles with compact, very strong dust targets lead to a more massive target accreting part of the projectile. Applied to planetesimal formation, the experiments suggest that the maximum possible ejecta velocity from a body of several cm in size after a collision is small. Ejecta were slow enough that they were reaccreted by means of gas flow if large pores were part of the body's morphology. While very weak bodies cannot grow in the primary collision at the given velocities, this can lead to growth by secondary collisions. Slight compression, which could result from preceding collisions, might lead to immediate growth of a body in slow collisions by adding projectile mass.  相似文献   

9.
From the light emitted during impacts of secondary particles produced during hypervelocity primary impacts, the velocities and relative masses of these ejecta were determined as a function of the angle between the ejection direction and the target surface. The velocity of the ejecta increases with increasing impact velocity and decreasing ejection angle. The ratio of the maximum ejecta velocity to the primary impact velocity decreases with increasing impact speed. The main fraction of the secondary particles is ejected in rather small angular intervals of about 10° width in elevation. The ejection angle of the main fraction of the ejecta mass increases with increasing impact velocity.  相似文献   

10.
We measured the velocity distributions of impact ejecta with velocities higher than ∼100 m s−1 (high-velocity ejecta) for impacts at variable impact angle α into unconsolidated targets of small soda-lime glass spheres. Polycarbonate projectiles with mass of 0.49 g were accelerated to ∼250 m s−1 by a single-stage light-gas gun. The impact ejecta are detected by thin aluminum foils placed around the targets. We analyzed the holes on the aluminum foils to derive the total number and volume of ejecta that penetrated the aluminum foils. Using the minimum velocity of the ejecta for penetration, determined experimentally, the velocity distributions of the high-velocity ejecta were obtained at α=15°, 30°, 45°, 60°, and 90°. The velocity distribution of the high-velocity ejecta is shown to depend on impact angle. The quantity of the high-velocity ejecta for vertical impact (α=90°) is considerably lower than derived from a power-law relation for the velocity distribution on the low-velocity ejecta (less than 10 m s−1). On the other hand, in oblique impacts, the quantity of the high-velocity ejecta increases with decreasing impact angle, and becomes comparable to those derived from the power-law relation. We attempt to scale the high-velocity ejecta for oblique impacts to a new scaling law, in which the velocity distribution is scaled by the cube of projectile radius (scaled volume) and a horizontal component of impactor velocity (scaled ejection velocity), respectively. The high-velocity ejecta data shows a good correlation between the scaled volume and the scaled ejection velocity.  相似文献   

11.
S. Yamamoto 《Icarus》2002,158(1):87-97
This paper reports the results of experiments on projectile impact into regolith targets at various impact angles. Copper projectiles of 240 mg are accelerated to 197 to 272 m s−1 using an electromagnetic gun. The ejecta are detected by thin Al foil targets as secondary targets, and the resulting holes on the foil are measured to derive the spatial distribution of the ejecta. The ejecta that penetrated the foil are concentrated toward the downrange azimuths of impacting projectiles in oblique impacts. In order to investigate the ejecta velocity distribution, the nondimensional volume of ejecta with velocities higher than a given value is calculated from the spatial distribution. In the case of the vertical impact of the projectile, most ejecta have velocities lower than 24% of the projectile speed (∼50 m s−1), and there are only several ejecta with velocities higher than 72 m s−1. This result confirms the existence of an upper limit to the ejection velocity in the ejecta velocity distribution (Hartmann cutoff velocity) (W. K. Hartmann, 1985, Icarus63, 69-98). On the other hand, it is found that, in the oblique impacts, there are a large number of ejecta with velocities higher than the Hartmann cutoff velocity. The relative quantity of ejecta above the Hartmann cutoff velocity increases as the projectile impact angle decreases. Taking these results with the results of S. Yamamoto and A. M. Nakamura (1997, Icarus128, 160-170) from impact experiments using an impact angle of 30°, it can be concluded that the ejecta from these regolith targets exhibit a bimodal velocity distribution. Below a few tens of m s−1, we see the expected velocity distribution of ejecta, but above this velocity we see a separate group of high-velocity ejecta.  相似文献   

12.
Impact craters are formed by the displacement and ejection of target material. Ejection angles and speeds during the excavation process depend on specific target properties. In order to quantify the influence of the constitutive properties of the target and impact velocity on ejection trajectories, we present the results of a systematic numerical parameter study. We have carried out a suite of numerical simulations of impact scenarios with different coefficients of friction (0.0–1.0), porosities (0–42%), and cohesions (0–150 MPa). Furthermore, simulations with varying pairs of impact velocity (1–20 km s−1) and projectile mass yielding craters of approximately equal volume are examined. We record ejection speed, ejection angle, and the mass of ejected material to determine parameters in scaling relationships, and to calculate the thickness of deposited ejecta by assuming analytical parabolic trajectories under Earth gravity. For the resulting deposits, we parameterize the thickness as a function of radial distance by a power law. We find that strength—that is, the coefficient of friction and target cohesion—has the strongest effect on the distribution of ejecta. In contrast, ejecta thickness as a function of distance is very similar for different target porosities and for varying impact velocities larger than ~6 km s−1. We compare the derived ejecta deposits with observations from natural craters and experiments.  相似文献   

13.
The depth and duration of energy and momentum coupling in an impact shapes the formation of the crater. The earliest stages of crater growth (when the projectile transfers its energy and momentum to the target) are unrecoverable when the event is described by late stage parameters, which collapse the initial conditions of the impact into a singular point in time and space. During the coupling phase, the details of the impact are mapped into the ejecta flow field. In this experimental study, we present new experimental and computational measurements of the ejecta distribution and crater growth extending from early times into main-stage ballistic flow for hypervelocity impacts over a range of projectile densities. Specifically, we assess the effect of projectile density on coupling depth and location in porous particulate (sand) targets. A non-invasive high-speed imaging technique is employed to capture the velocity of individual ejecta particles very early in the cratering event as a function of both time and launch position. These data reveal that the effects of early-stage coupling, such as non-constant ejection angles, manifest not only in early-time behavior but also extend to main-stage crater growth. Time-resolved comparisons with hydrocode calculations provide both benchmarking and insight into the parameters controlling the ejection process. Measurements of the launch position and metrics for the transient diameter to depth ratio as a function of time demonstrate non-proportional crater growth throughout much of excavation. Low-density projectiles couple closer to the surface, thereby leading to lower ejection angles and larger effective diameter to depth ratios. These results have implications for the ballistic emplacement of ejecta on planetary surfaces, and are essential to interpreting temporally resolved data from impact missions.  相似文献   

14.
Abstract– A Devonian siltstone from Orkney, Scotland, shows survival of biomarkers in high‐velocity impact experiments. The biomarkers were detected in ejecta fragments from experiments involving normal incidence of steel projectiles at 5–6 km s?1, and in projectile fragments from impact experiments into sand and water at 2–5 km s?1. The associated peak shock pressures were calculated to be in the range of 110–147 GPa for impacts of the steel projectiles into the siltstone target, and hydrocode simulations are used to show the variation of peak pressure with depth in the target and throughout the finite volume projectiles. Thermally sensitive biomarker ratios, including ratios of hopanoids and steranes, and the methylphenanthrene ratio, showed an increase in thermal maturity in the ejecta, and especially the projectile, fragments. Measurement of absolute concentrations of selected biomarkers indicates that changes in biomarker ratios reflect synthesis of new material rather than selective destruction. Their presence in ejecta and projectile fragments suggests that fossil biomarkers may survive hypervelocity impacts, and that experiments using biomarker‐rich rock have high potential for testing survival of organic matter in a range of impact scenarios.  相似文献   

15.
We investigated the ejection mechanics by a complementary approach of cratering experiments, including the microscopic analysis of material sampled from these experiments, and 2‐D numerical modeling of vertical impacts. The study is based on cratering experiments in quartz sand targets performed at the NASA Ames Vertical Gun Range. In these experiments, the preimpact location in the target and the final position of ejecta was determined by using color‐coded sand and a catcher system for the ejecta. The results were compared with numerical simulations of the cratering and ejection process to validate the iSALE shock physics code. In turn the models provide further details on the ejection velocities and angles. We quantify the general assumption that ejecta thickness decreases with distance according to a power‐law and that the relative proportion of shocked material in the ejecta increase with distance. We distinguish three types of shock metamorphic particles (1) melt particles, (2) shock lithified aggregates, and (3) shock‐comminuted grains. The agreement between experiment and model was excellent, which provides confidence that the models can predict ejection angles, velocities, and the degree of shock loading of material expelled from a crater accurately if impact parameters such as impact velocity, impactor size, and gravity are varied beyond the experimental limitations. This study is relevant for a quantitative assessment of impact gardening on planetary surfaces and the evolution of regolith layers on atmosphereless bodies.  相似文献   

16.
Abstract– The MEMIN research unit (Multidisciplinary Experimental and Modeling Impact research Network) is focused on analyzing experimental impact craters and experimental cratering processes in geological materials. MEMIN is interested in understanding how porosity and pore space saturation influence the cratering process. Here, we present results of a series of impact experiments into porous wet and dry sandstone targets. Steel, iron meteorite, and aluminum projectiles ranging in size from 2.5 to 12 mm were accelerated to velocities of 2.5–7.8 km s?1, yielding craters with diameters between 3.9 and 40 cm. Results show that the target’s porosity reduces crater volumes and cratering efficiency relative to nonporous rocks. Saturation of pore space with water to 50% and 90% increasingly counteracts the effects of porosity, leading to larger but flatter craters. Spallation becomes more dominant in larger‐scale experiments and leads to an increase in cratering efficiency with increasing projectile size for constant impact velocities. The volume of spalled material is estimated using parabolic fits to the crater morphology, yielding approximations of the transient crater volume. For impacts at the same velocity these transient craters show a constant cratering efficiency that is not affected by projectile size.  相似文献   

17.
We study central collisions between millimeter-sized dust projectiles and centimeter-sized dust targets in impact experiments. Target and projectile are dust aggregates consisting of micrometer-sized SiO2 particles. Collision velocities range up to 25 m/s. The general outcome of a collision strongly depends on the impact velocity. For collisions below 13 m/s rebound and a small degree of fragmentation occur. However, at higher collision velocities up to 25 m/s approximately 50% of the mass of the projectile rigidly sticks to the target after the collision. Thus, net growth of a body is possible in high speed collisions. This supports the idea that planetesimal formation via collisional growth is a viable mechanism at higher impact velocities. Within our set of parameters the experiments even suggest that higher impact velocities might be preferable for growth in collisions between dusty bodies. For the highest impact velocities most of the ejecta is within small dust aggregates about 500 μm in size. In detail the size distribution of ejected dust aggregates is flat for very small particles smaller than 500 μm and follows a power law for larger ejected dust aggregates with a power of −5.6±0.2. There is a sharp upper cut-off at about 1 mm in size with only a few particles being slightly larger. The ejection angle is smaller than 3° with respect to the target surface. These fast ejecta move with 40±10% of the impact velocity.  相似文献   

18.
Abstract– In the context of the MEMIN project, a hypervelocity cratering experiment has been performed using a sphere of the iron meteorite Campo del Cielo as projectile accelerated to 4.56 km s?1, and a block of Seeberger sandstone as target material. The ejecta, collected in a newly designed catcher, are represented by (1) weakly deformed, (2) highly deformed, and (3) highly shocked material. The latter shows shock‐metamorphic features such as planar deformation features (PDF) in quartz, formation of diaplectic quartz glass, partial melting of the sandstone, and partially molten projectile, mixed mechanically and chemically with target melt. During mixing of projectile and target melts, the Fe of the projectile is preferentially partitioned into target melt to a greater degree than Ni and Co yielding a Fe/Ni that is generally higher than Fe/Ni in the projectile. This fractionation results from the differing siderophile properties, specifically from differences in reactivity of Fe, Ni, and Co with oxygen during projectile‐target interaction. Projectile matter was also detected in shocked quartz grains. The average Fe/Ni of quartz with PDF (about 20) and of silica glasses (about 24) are in contrast to the average sandstone ratio (about 422), but resembles the Fe/Ni‐ratio of the projectile (about 14). We briefly discuss possible reasons of projectile melting and vaporization in the experiment, in which the calculated maximum shock pressure does not exceed 55 GPa.  相似文献   

19.
Abstract— We describe the results of a variety of model calculations for predictions of observable results of the LCROSS mission to be launched in 2009. Several models covering different aspects of the event are described along with their results. Our aim is to bracket the range of expected results and produce a useful guide for mission planning. In this paper, we focus on several different questions, which are modeled by different methods. The questions include the size of impact crater, the mass, velocity, and visibility of impact ejecta, and the mass and temperature of the initial vapor plume. The mass and velocity profiles of the ejecta are of primary interest, as the ejecta will be the main target of the S‐S/C observations. In particular, we focus on such quantities as the amount of mass that reaches various heights. A height of 2 km above the target is of special interest, as we expect that the EDUS impact will take place on the floor of a moderate‐sized crater ?30 km in diameter, with a rim height of 1–2 km. The impact ejecta must rise above the crater rim at the target site in order to scatter sunlight and become visible to the detectors aboard the S‐S/C. We start with a brief discussion of crater scaling relationships as applied to the impact of the EDUS second stage and resulting estimated crater diameter and ejecta mass. Next we describe results from the RAGE hydrocode as applied to modeling the short time scale (t 0.1 s) thermal plume that is expected to occur immediately after the impact. We present results from several large‐scale smooth‐particle hydrodynamics (SPH) calculations, along with results from a ZEUS‐MP hydrocode model of the crater formation and ejecta mass‐velocity distribution. We finish with two semi‐analytic models, the first being a Monte Carlo model of the distribution of expected ejecta, based on scaling models using a plausible range of crater and ejecta parameters, and the second being a simple model of observational predictions for the shepherding spacecraft (S‐S/C) that will follow the impact for several minutes until its own impact into the lunar surface. For the initial thermal plume, we predict an initial expansion velocity of ?7 km s?1, and a maximum temperature of ?1200 K. Scaling relations for crater formation and the SPH calculation predict a crater with a diameter of ?15 m, a total ejecta mass of ?106kg, with ?104kg reaching an altitude of 2 km above the target. Both the SPH and ZEUS‐MP calculations predict a maximum ejecta velocity of ?1 km s?1. The semi‐analytic Monte Carlo calculations produce more conservative estimates (by a factor of ?5) for ejecta at 2 km, but with a large dispersion in possible results.  相似文献   

20.
This study introduces an experimental approach using direct laser irradiation to simulate the virtually instantaneous melting of target rocks during meteorite impacts. We aim at investigating the melting and mixing processes of projectile (iron meteorite; steel) and target material (sandstone) under idealized conditions. The laser experiments (LE) were able to produce features very similar to those of impactites from meteorite craters and cratering experiments, i.e., formation of lechatelierite, partial to complete melting of sandstone, and injection of projectile droplets into target melts. The target and projectile melts have experienced significant chemical modifications during interaction of these coexisting melts. Emulsion textures, observed within projectile‐contaminated target melts, indicate phase separation of silicate melts with different chemical compositions during quenching. Reaction times of 0.6 to 1.4 s could be derived for element partitioning and phase‐separation processes by measuring time‐depended temperature profiles with a bolometric detector. Our LE allow (i) separate melting at high temperatures to constrain primary melt heterogeneities before mixing of projectile and target, (ii) quantification of element partitioning processes between coexisting projectile and target melts, (iii) determination of cooling rates, and (iv) estimation of reaction times. Moreover, we used a thermodynamic approach to calculate the entropy gain during laser melting. The entropy changes for laser‐melting of sandstone and iron meteorite correspond to shock pressures and particle velocities produced during the impact of an iron projectile striking a quartz target at a minimum impact velocity of ~6 km s?1, inducing peak shock pressures of ~100 GPa in the target.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号