首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract: Sulfides from the Daebo Jurassic granitoids and some ore deposits from Korean Peninsula and Sikhote Alin occurring in different basement settings were analyzed for δ34S values. Highly positive values were obtained from Jurassic Mo skarn deposit at Geumseong of the Ogcheon belt (average +13. 0%), Au‐quartz vein deposits at Unsan, North Korea (+6. 7%), and late Paleozoic Sn‐F deposit at Votnesenka (+8. 2%), Khanka massif, Russia. Together with published data of that region, regional variation of δ34S values is shown across Korean Peninsula. Sulfur isotopic data published are compiled on 88 ore deposits, whose mineralization epochs belong to Cretaceous (58 deposits), Jurassic (25 deposits) and Precambrian (4 deposits) in South Korea. Average sulfur isotopic values vary across South Korea as follows: Cretaceous deposits in the Gyeongsang basin, +4. 8% ranging +1.2 ? +12.7‰ (n=28); Jurassic and Cretaceous deposits in the Sobaegsan massif, +3. 5% ranging 0.0 ? +7.8‰ (n=20); those of the Ogcheon belt, +6. 4% ranging ‐0.5 ? +15.4‰(n=19); those of the Gyeonggi massif, +5. 5% ranging +2.1 ? +9.0‰(n = 21). The δ34S values of South Korea tend to be concentrated around +5. 5 permil, exhibiting little, if any, a systematic variation across the geotectonic belts. This tendency is seen also in North Korea and Northeast China within the Cino‐Korean Block, and may be called as Cino‐Korean type. Sulfur of this type is derived mostly from the crystalline basement. Khanka massif of Russia seems to have features of the Cino‐Korean type. In contrast, paired positive/negative belts corresponding to magnetite‐series/ilmenite‐series granitic belts are overwhelming in the Japanese Islands, especially in Southwest Japan. The similar trend is also seen in southern Sikhote Alin and northern Okhotsk Rim, which may be called as Japanese type. Source of the sulfur in this type is likely in the subducting oceanic slab for positive value and accreted sedimentary complex for the negative value, respectively. The Daebo granitoids have an average rock δ34S value of +5. 3 permil, which should have reflected that of the source rocks in the continental crust. The ore sulfur heavier than this value may have been originated in other granitoids having even higher δ34S values, or the ore fluids interacted directly with sulfate sulfur of the host evaporites or carbonate rocks. Rock isotopic values of granitoids and basement rocks need to be examined in future from the above point of view in mind.  相似文献   

2.
Many metallic ore deposits of the Late Cretaceous to Early Tertiary periods are distributed in the Gyeongsang Basin. Previous and newly analyzed sulfur isotope data of 309 sulfide samples from 56 ore deposits were reviewed to discuss the genetic characteristics in relation to granitoid rocks. The metallogenic provinces of the Gyeongsang Basin are divided into the Au–Ag(–Cu–Pb–Zn) province in the western basin where the sedimentary rocks of the Shindong and Hayang groups are distributed, Pb–Zn(–Au–Ag–Cu), Cu–Pb–Zn(–Au–Ag), and Fe–W(–Mo) province in the central basin where the volcanic rocks of the Yucheon Group are dominant, and Cu(–Mo–W–Fe) province in the southeastern basin where both sedimentary rocks of the Hayang Group and Tertiary volcanic rocks are present. Average sulfur isotope compositions of the ore deposits show high tendencies ranging from 2.2 to 11.7‰ (average 5.4‰) in the Pb–Zn(–Au–Ag–Cu) province, ?0.7 to 11.5‰ (average 4.6‰) in the Cu–Pb–Zn(–Au–Ag) province, and 3.7 to 11.4‰ (average 7.5‰) in the Fe–W(–Mo) province in relation to magnetite‐series granitoids, whereas they are low in the Au–Ag(–Cu–Pb–Zn) province in relation to ilmenite‐series granitoids, ranging from ?2.9 to 5.7‰ (average 1.7‰). In the Cu(–Mo–W–Fe) province δ34S values are intermediate ranging from 0.3 to 7.7‰ (average 3.6‰) and locally high δ34S values are likely attributable to sulfur derived from the Tertiary volcanic rocks during hydrothermal alteration through faults commonly developed in this region. Magma originated by the partial melting of the 34S‐enriched oceanic plate intruded into the volcanic rocks and formed magnetite‐series granitoids in the central basin, which contributed to high δ34S values of the metallic deposits. Conversely, ilmenite‐series granitoids were formed by assimilation of sedimentary rocks rich in organic sulfur that influenced the low δ34S values of the deposits in the western and southeastern provinces.  相似文献   

3.
The S-isotope composition (δ34SCDT) of 213 samples of sulfides, sulfates and native sulfur from the pyrite mineralizations of southern Tuscany and associated country rocks were determined. The sulfur isotopic composition of pyrite is quite homogeneous and similar for all studied ore bodies, with an average δ34S value near +9,5‰. Pyrite disseminated within the Filladi di Boccheggiano formation, and thought to be authigenic, shows a much larger range of δ34S values (-13.1 to +14.5‰). The isotopic compositions of other sulfides associated with pyrite in the deposits show that isotopic equilibrium among sulfides was approached on a regional scale, but seldom fully attained. Isotopic data suggest that sedimentary marine sulfate was the ultimate source of sulfur in ores. Sulfates (mostly anhydrite) from the sulfate-carbonate lenses associated with both the Filladi di Boccheggiano and the Calcare Cavernoso formations also have similar and homogeneous compositions (average δ34S=+15–16‰). Coexisting sulfates and sulfides are not in isotopic equilibrium. In the light of the isotopic data, among the many proposed genetic models for the largest stratabound pyrite bodies the two following alternatives appear the most likely: 1) in agreement with recently suggested hypotheses, the ore bodies are older than the emplacement of the Mio-Pliocenic granitoids in the area, and are probably hydrothermal-sedimentary in origin, coeval with associated country rocks; 2) the ore bodies were formed as a consequence of bacterial reduction of anhydrite in low-temperature convection systems related to the early stages of the Mio-Pliocenic thermal anomaly. In both cases, the emplacement of the Mio-Pliocenic granitoids caused metamorphism and remobilization of the pre-existing ores, producing smaller discordant mineralized bodies.  相似文献   

4.
Abstract. Sulfur isotope ratios of cinnabar from Hg deposits and stibnite, jamesonite and berthierite from Sb deposits in Japan are examined in order to understand metallogeneses of Hg and Sb deposits in Japanese island arcs. The studied Hg and Sb deposits include the Hg deposit at Yamato‐suigin (Honshu) and the Sb deposit at Ichinokawa (Shikoku) in the Southwest Japan arc. In addition, Hg deposits including Itomuka and Ryushoden in central Hokkaido and Hg and Sb mineralizations in Northeast Japan arc are examined. The δ34S values of cinnabar from the Hidaka‐Kitami district, central Hokkaido, including the Itomuka and Ryushoden deposits range widely, from ‐10 to +16 %o, the highest values encountered at the Samani deposit. The δ34S values of cinnabar from other areas in Japan range from ‐12 to +5 %o, having δ34S values higher than +2 %o from southwestern Hokkaido (Meiji deposit), Shikoku (Suii deposit) and Kyushu (Hasami and Yamagano deposits). On the other hand, the δ34S values of stibnite from all areas in Japan range from ‐14 to +5 %o, having positive δ34S values higher than +2 %o up to +5 %o from southwestern Hokkaido (Yakumo, Toyotomi and Teine deposits) and eastern‐central Honshu (Hachiman and Daikoku deposits). The variation in δ34S values of Hg and Sb deposits may reflect the variation in δ34S values of country rocks or variation in mixing ratio of sulfur extracted from the country rocks, sulfur derived from seawater sulfate, and sulfur derived from magmatic emanations. The relatively high δ34S values of cinnabar and stibnite higher than +2 %o from southwestern Hokkaido, eastern‐central Honshu and Kyushu are probably caused by contribution of volcanic emanation from arc magmas having positive σδ34S values, whereas the positive δ34S values of cinnabar higher than +2 %o from Suii deposit in Shikoku may be attributed to structurally substituted sulfate in limestone country rocks and/or sulfur derived from seawater sulfate. However, the wide range of the δ34S values of cinnabar from the Hidaka‐Kitami district, central Hokkaido, is difficult to explain at this moment. Other relatively low, negative δ34S values of cinnabar and stibnite, berthierite from other areas in Japan may be attributed to 1) incorporation of isotopically light sedimentary sulfur or sulfur derived from ilmenite‐series silicic magma, or 2) less contribution of volcanic emanation from arc magmas having positive σδ34S values.  相似文献   

5.
Abstract. Mineral assemblage, precipitation sequence and textures of the gold‐bearing veins from the Hishikari epithermal vein‐type deposits, southern Kyushu, Japan, were examined. In addition, fluid inclusion microthermometry and carbon and oxygen isotopic compositions of calcite were determined. Calcite, and that replaced by quartz, were commonly observed throughout the precipitation sequence of the veins. Thus, calcite must be a more common gangue constituent initially than observed presently. Association of calcite and electrum is observed immediately subsequent to columnar adularia in some vein samples. In addition, close association of electrum with pseudo‐acicular quartz, and electrum with truscottite were observed. The initial coprecipitation of electrum and calcite might be a common phenomenon in the gold‐bearing veins at the Hishikari deposits. The Th (homogenization temperature) data from the Honko‐Sanjin deposits are generally higher than those from the Yamada deposit. Samples that show association of calcite and electrum yielded higher Th (206–217°C, average) than the Th data from calcite associated with low‐grade Au ore or barren (180–204°C, average). The measured Tm (temperature of last melting point of ice) range from ‐0.4 to 0.0°C. The result suggests that the salinity of the hydrothermal solution was low during the precipitation both of calcite associated with Au mineralization and of barren calcite. Fluid inclusion evidence suggestive of boiling of hydrothermal solution for the precipitation of calcite was not recognized in the present work. The δ13C and δ18O values of calcite range from ‐10.8 to —4.7 % and from +3.2 to +15.2 %, respectively. The δ13C value of H2CO3 and the δ18O value of H2O in the hydrothermal fluids calculated assuming isotopic equilibrium with calcite using the temperature obtained by fluid inclusion microthermometry, range from ‐14.4 to ‐9.1 %, and from ‐6.2 to +5.5 %, respectively. Thus, the calculated δ18O values of H2O for calcite further confirm the presence of the 18O‐enriched ore fluids during the mineralization at the Hishikari deposits. The hydrothermal solution isotopically equilibrated with the sedimentary basement rocks was responsible for the gold mineralization associated with calcite.  相似文献   

6.
Abstract. Chemical and sulfur isotopic compositions were obtained for a series of rocks within the chert‐clastic sequence surrounding the Kajika massive sulfide ore horizon at Shibukawasawa in the Ashio copper‐mining district, Ashio Terrane, central Japan. The sequence is lithologically classified into three units: chert, siliceous shale with basic volcanics, and sandstone‐shale, in ascending stratigraphic order. The Kajika ore horizon corresponds to the lowermost part of the unit that contains siliceous shale with basic volcanics. The rocks around the Kajika ore horizon are enriched in P2O5 (max. 0.22 %), Ba (max. 2400 ppm), Cu (595 ppm), V (323 ppm), Pb (168 ppm), Zn (124 ppm), and Mo (24 ppm) in siliceous shale; and Ba (4220 ppm), Zr (974 ppm), Cr (718 ppm), Ni (492 ppm), V (362 ppm), Zn (232 ppm), Nb (231 ppm), and Co (71 ppm) in the basic volcanics. The siliceous shale is enriched in a number of redox‐sensitive elements such as Cu, V, Pb, Zn, and Mo, which are known to be enriched in black shale and anoxic and hydrothermal sediments. The δ34S values of sulfides in the chert and sandstone‐shale lie in the range of 0±2 %, and those in the siliceous shale range from ‐5 to ‐14 %. The measured δ34S values in the basic volcanics are ‐0.3, ‐2.7, and ‐31.5 %. These heavier δ34S signatures (around 0 %) recorded throughout the sequence indicate that the rocks formed under anoxic bottom‐water conditions. Slightly lighter δ34S values recorded in siliceous shale might reflect significant mixing of sulfides that formed by sulfate‐reducing bacteria in an overlying oxic environment. The long‐term duration of anoxic conditions indicated by the heavier δ34S signature is considered to have played an important role in protecting the Kajika sulfide ores from oxidative decomposition and preserving the ores in sedimentary accumulations.  相似文献   

7.
Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.  相似文献   

8.
The Shaki porphyry copper(gold) deposits are a trpical example of porphyry copper deposits associ-ated with diorite in eastern China. Quartz diorite, which hosts the deposits, has a Rb-Sr isochron age of 127.9±1.6Ma. Geochemically, the rock is rich in alkalis (especially sodium), light rare earth elements (LREE) and large-ionlithophile elements (LILE), and has a relatively low initial strontium isotopic ratio (I_(Sr)=0.7058); thus it is the productof differentiation of crust-mantle mixing source magma. The model of alteration and mineralization zoning is similarto the Hollister (1974) diorite model. The ore fluids have a relatively high salinity and contain significant amounts ofCO_2, Ca~(2+), Na~+ and Cl~-. The homogenization temperatures of fluid inclusions for the main mineralization stage rangefrom 280 to 420℃, the δ~(18)O values of the ore fluids vary from 3.51 to 5.52‰, the δD values are in the range between-82.4 and -59.8‰, the δ~(34)S values of sulphides vary from -0.3 to 2.49‰, and the δ~(13)C values of CO_2 in inclusionsrange between -2.66 and -6.53‰. Isotope data indicate that the hydrothermal ore fluids and ore substances of theShaxi porphyry copper (gold) deposits were mainly derived from magmatic systems.  相似文献   

9.
The Nage Cu-Pb deposit,a new found ore deposit in the southeast Guizhou province,southwest China,is located on the southwestern margin of the Jiangnan Orogenic Belt.Ore bodies are hosted in slate and phyllite of Neoproterozoic Jialu and Wuye Formations,and are structurally controlled by EW-trending fault.It contains Cu and Pb metals about 0.12 million tonnes with grades of 0.2 wt% to 3.4 wt% Cu and 1.1 wt% to 9.27 wt% Pb.Massive and disseminated Cu-Pb ores from the Nage deposit occur as either veinlets or disseminations in silicified rocks.The ore minerals include chalcopyrite,galena and pyrite,and gangue minerals are quartz,sericite and chlorite.The H-O isotopic compositions of quartz,S-Cu-Pb isotopic compositions of sulfide minerals,Pb isotopic compositions of whole rocks and ores have been analyzed to trace the sources of ore-forming fluids and metals for the Nage Cu-Pb deposit.The δ65CuNBS values of chalcopyrite range from-0.09% to +0.33‰,similar to basic igneous rocks and chalcopyrite from magmatic deposits.δ65CuNBS values of chalcopyrite from the early,middle and final mineralization stages show an increasing trend due to63Cu prior migrated in gas phase when fluids exsolution from magma.δ34SCDT values of sulfide minerals range from 2.7‰ to +2.8‰,similar to mantle-derived sulfur(0±3‰).The positive correlation between δ65CuNBS and δ34SCDT values of chalcopyrite indicates that a common source of copper metal and sulfur from magma.δDH2OSMOW and δ18OH2O-SMOW values of water in fluid inclusions of quartz range from 60.7‰ to 44.4‰ and +7.9‰ to +9.0‰(T=260°C),respectively and fall in the field for magmatic and metamorphic waters,implicating that mixed sources for H2O in hydrothermal fluids.Ores and sulfide minerals have a small range of Pb isotopic compositions(208Pb/204Pb=38.152 to 38.384,207Pb/204Pb=15.656 to 17.708 and 206Pb/204Pb=17.991 to 18.049) that are close to orogenic belt and upper crust Pb evolution curve,and similar to Neoproterozoic host rocks(208Pb/204Pb=38.201 to 38.6373,207Pb/204Pb=15.648 to 15.673 and 206Pb/204Pb=17.820 to 18.258),but higher than diabase(208Pb/204Pb=37.830 to 38.012,207Pb/204Pb=15.620 to 15.635 and206Pb/204Pb=17.808 to 17.902).These results imply that the Pb metal originated mainly from host rocks.The H-O-S-Cu-Pb isotopes tegather with geology,indicating that the ore genesis of the Nage Cu-Pb deposit is post-magmatic hydrothermal type.  相似文献   

10.
The Ohori ore deposit is one of the Cu–Pb–Zn deposits in the Green Tuff region, NE Japan, and consists of skarn‐type (Kaninomata) and vein‐type (Nakanomata) orebodies. The former has a unique origin because its original calcareous rocks were made by hydrothermal precipitation during Miocene submarine volcanism. Carbon and oxygen isotope ratios of skarn calcite and sulfur isotope ratios of sulfides were measured in and around the deposit. Carbon and oxygen isotope ratios of the skarn calcite are δ13C = ?15.51 to ?5.1‰, δ18O = +3.6 to +22.5‰. δ13C values are slightly lower than those of the Cretaceous skarn deposits in Japan. These isotope ratios of the Kaninomata skarn show that the original calcareous rocks resemble the present submarine hydrothermal carbonates at the CLAM Site, Okinawa Trough, than Cenozoic limestones, even though some isotopic shifts had occurred during later skarnization. δ34S ratios of the sulfide minerals from the Kaninomata and Nakanomata orebodies are mostly in a narrow range of +4.0 to +7.0‰ and they resemble each other, suggesting the same sulfur origin for the both deposits. The magnetite‐series Tertiary Kaninomatasawa granite is distributed just beneath the skarn layer and has δ34S ratios of +7.5 to 8.1‰. The heavy sulfur isotope ratio of the skarn sulfides may have been affected by the Kaninomatasawa granite.  相似文献   

11.
Pb–Zn deposits are widespread and common in various parts of the Taurus Belt. Most of the deposits are of pyrometasomatic and hydrothermal origin. The Keban Pb–Zn deposits are located along the intrusive contact between the Paleozoic – Lower Triassic Keban Metamorphic Formation and the syenite porphyry of the Upper Cretaceous Keban igneous rocks. Various studies have already been carried out; using fluid inclusion studies on fluorite, calcite and quartz on the pyrite–chalcopyrite bearing Keban ore deposits. This study focuses on the interpretation of stable isotope compositions in connexion with fluid inclusion data. Sulphur isotope values (δ34S) of pyrite are within the range of ?0.59 to +0.17‰V-CDT (n = 10). Thus, the source of sulphur is considered to be magmatic, as evidenced by associated igneous rocks and δ34S values around zero“0”. Oxygen isotope values δ18O of quartz vary between +10.5 and +19.9‰(SMOW). However, δ18O and δ13C values of calcite related to re-crystallized limestone (Keban Metamorphic Formation) reach up to +27.3‰(SMOW) and +1.6‰(PDB), respectively. The δ34S, δ13C and δ18O values demonstrate that skarn-type Pb–Zn deposits formed within syeno-monzonitic rocks and calc-schist contacts could have developed at low temperatures, by mixing metamorphic and meteoric waters in the final stages of magmatism.  相似文献   

12.

The geology, stable isotopes and fluid inclusions from mineralized and unmineralized Middle Proterozoic sequences of the McArthur Basin, Northern Territory, have been studied at Eastern Creek, Bulman Mines, Beetle Springs, and other localities in the McArthur Basin where disseminated sulphides in unmineralized black shales were available from drill core. At Eastern Creek, galena and minor chalcopyrite (δ34S+3.6 to +11.2%o) occur in an evaporitic sedimentary sequence. Barite (δ34S+18.4 to +24.7%o) also occurs, and saline brines are trapped along healed fractures in the barite. Pressure‐corrected trapping temperatures in the barite (95–138°C), and in vein dolomite (158–168°C) agree with temperature estimates from the degree of maturation of the sedimentary organic matter. The δ18O and δ13CCo2 values of the mineralizing fluid were calculated to be +3.5 to +4.5%o and ‐2.7%o, respectively. Sedimentary dolomite has restricted δ13C and δ18O ranges, within the reported ranges for non‐mineralized Middle Proterozoic dolomite. An ore formation model developed for Eastern Creek, in which a basinal fluid at about 200°C carrying base metals and sulphide was released from underlying sediments during local fault movement, may be applicable to a number of other deposits. The mineralization deposited from these fluids occurs only below the pre‐Roper Group unconformity, implying that it may be older than the basal Roper Group. The δ34S values of iron sulphides in fine grained black dolostones (not associated with mineral deposits) from the McArthur Basin were assessed in the light of the values found for sulphides in modern organic‐rich sedimentary environments. The data so obtained suggest that the considerable concentration of iron sulphide in the mineral deposits formed, at least in part, from heated basinal waters and that disseminated iron sulphides remote from mineralization also formed from a similar source.  相似文献   

13.
Abstract. Chemistry and sulfur isotopes are analyzed for a series of rocks in the chert‐dominant sequence around the stratiform manganese ore deposit of the Noda‐Tamagawa mine in the northern Kitakami Terrane, northeast Japan. The sequence is litholog‐ically classified into six units in ascending order: lower bedded chert, lower black shale, massive chert, manganese ore, upper black shale, and upper bedded chert. The rocks around the manganese ore deposit exhibit anomalous enrichment in Ni (max. 337 ppm), Zn (102) and U (30) in the upper part of lower bedded chert, Mo (122), Tl (79) and Pb (33) in the lower black shale, MnO, Cu (786) and Co (62) in the manganese ore, and As (247) and Sb (17) in the upper black shale. The aluminum‐normalized profiles reveal zonal enrichment of redox‐sensitive elements around the manganese bed: Zn‐Ni‐Fe‐Mo‐U(‐Co), Tl‐Pb(‐Mo), Mn‐Fe‐Cu‐V‐Cr‐Co(‐Zn) and As‐Sb in ascending order. The uppermost part of the lower bedded chert and black shale exhibit negative Ce/Ce* values, whereas the massive chert, manganese ore and lower part of the upper bedded chert display positive values. The isotopic δ34S values are 0±6 % in the lower part of the lower bedded chert, ‐19 to ‐42 % in the upper part of the lower bedded chert, ‐36 to ‐42 % in the lower black shale, ‐28 to ‐35 % in the massive chert, manganese ore and upper black shale, and ‐23±5 % in the upper bedded chert. Thus, there is a marked negative shift in δ34S values in the lower bedded chert, and an upward‐increasing trend in δ34S through the manganese ore horizon. The present data provide evidence for a change in the paleoceanographic environmental resulting from inflow of oxic deepwater into the stagnant anoxic ocean floor below the manganese ore horizon. This event is likely to have triggered the precipitation of manganese oxyhydroxides. The redistribution of redox‐sensitive elements through the formation of metalliferous black shale and manganese carbonate ore may have occurred in association with bacterial decomposition of organic matter during early diagenesis of initial manganese oxyhydroxides.  相似文献   

14.
The Chahmir zinc–lead deposit (1.5 Mt @ 6 % Zn + 2 % Pb) in Central Iran is one among several sedimentary-exhalative Zn–Pb deposits in the Early Cambrian Zarigan–Chahmir basin (e.g., Koushk, Darreh-Dehu, and Zarigan). The deposit is hosted by carbonaceous, fine-grained black siltstones, and shales interlayered with volcaniclastic sandstone beds. It corresponds to the upper part of the Early Cambrian volcano-sedimentary sequence (ECVSS), which was deposited on the Posht-e-Badam Block during back-arc rifting of the continental margin of Central Iran. Based on crosscutting relationships, mineralogy, and texture of sulfide mineralization, four different facies can be distinguished: stockwork (feeder zone), massive ore, bedded ore, and distal facies (exhalites with barite). Silicification, carbonatization, sericitization, and chloritization are the main wall-rock alteration styles; alteration intensity increases toward the proximal feeder zone. Fluid inclusion microthermometry was carried out on quartz associated with sulfides of the massive ore. Homogenization temperatures are in the range of 170–226 °C, and salinity is around 9 wt% NaCl eq. The size distribution of pyrite framboids of the bedded ore facies suggests anoxic to locally suboxic event for the host basin. δ34S(V-CDT) values of pyrite, sphalerite, and galena range from +10.9 to +29.8?‰. The highest δ34S values correspond to the bedded ore (+28.6 to +29.8?‰), and the lowest to the massive ore (+10.9 to +14.7?‰) and the feeder zone (+11.3 and +12.1?‰). The overall range of δ34S is consistent with a sedimentary environment where sulfide sulfur was derived from two sources. One of them was corresponding to early ore-stage sulfides in bedded ore and distal facies, consistent with bacterial reduction from coeval seawater sulfate in a closed or semiclosed basin. However, the δ34S values of late ore-stage sulfides, observed mainly in massive ore, interpreted as a hydrothermal sulfur component, leached from the lower part of the ECVSS. Sulfur isotopes, along with the sedimentological, textural, mineralogical, fluid inclusion, and geochemical characteristics of the Chahmir deposit are in agreement with a vent-proximal (Selwyn type) SEDEX ore deposit model.  相似文献   

15.
In Kamchatka, Central Koryak, Central Kamchatka and East Kamchatka metallogenic belts are distributed from northwest to southeast. K–Ar age, sulfur isotopic composition of sulfide minerals, and bulk chemical compositions of ores were analyzed for 13 ore deposits including hydrothermal gold‐silver and base metal, in order to elucidate the geological time periods of ore formation, relationship to regional volcanic belts, type of mineralization, and origin of sulfur in sulfides. The dating yielded ore‐forming ages of 41 Ma for the Ametistovoe deposit in the Central Koryak, 17.1 Ma for the Zolotoe deposit and 6.9 Ma for the Aginskoe deposit in the Central Kamchatka, and 7.4 Ma for the Porozhistoe deposit and 5.1 Ma for the Vilyuchinskoe deposit in the East Kamchatka metallogenic belt. The data combined with previous data of ore‐forming ages indicate that the time periods of ore formation in these metallogenic belts become young towards the southeast. The averaged δ34SCDT of sulfides are ?2.8‰ for the Ametistovoe deposit in Central Koryak, ?1.8‰ to +2.0‰ (av. ?0.1‰) for the Zolotoe, Aginskoe, Baranievskoe and Ozernovskoe deposits in Central Kamchatka, and ?0.7 to +3.8‰ (av. +1.7‰) for Bolshe‐Bannoe, Kumroch, Vilyuchinskoe, Bystrinskoe, Asachinskoe, Rodnikovoe, and Mutnovskoe deposits in East Kamchatka. The negative δ34SCDT value from the Ametistovoe deposit in Central Koryak is ascribed to the contamination of 32S‐enriched sedimentary sulfur in the Ukelayat‐Lesnaya River trough of basement rock. Comparison of the sulfur isotope compositions of the mineral deposits shows similarity between the Central Koryak and Magadan metallogenic belts, and East Kamchatka and Kuril Islands belts. The Central Kamchatka belt is intermediate between these two groups in term of sulfur isotopic composition.  相似文献   

16.
The Martabe Au–Ag deposit, North Sumatra Province, Indonesia, is a high sulfidation epithermal deposit, which is hosted by Neogene sandstone, siltstone, volcanic breccia, and andesite to basaltic andesite of Angkola Formation. The deposit consists of six ore bodies that occurred as silicified massive ore (enargite–luzonite–pyrite–tetrahedrite–tellurides), quartz veins (tetrahedrite–galena–sphalerite–chalcopyrite), banded sulfide veins (pyrite–tetrahedrite–sphalerite–galena) and cavity filling. All ore bodies are controlled by N–S and NW–SE trending faults. The Barani and Horas ore bodies are located in the southeast of the Purnama ore body. Fluid inclusion microthermometry, and alunite‐pyrite and barite‐pyrite pairs sulfur isotopic geothermometry show slightly different formation temperatures among the ore bodies. Formation temperature and salinity of fluid inclusions of the Purnama ore body range from 200 to 260 C and from 6 to 8 wt.% NaCl equivalent, respectively. Formation temperature and salinity of fluid inclusions of the Barani ore body range from 200 to 220 °C and from 0 to 2.5 wt.% NaCl equivalent and those of the Horas ore body range from 240 to 275 °C and from 2 to 3 wt.% NaCl equivalent, respectively. The Barani and Horas ore bodies are less silicified and sulfides are less abundant than the Purnama ore body. A relationship between enthalpy and chloride content indicates mixing of hot saline fluids with cooler dilute fluids during the mineralization of each of the ore bodies. The δ18O values of quartz samples from the southeast ore bodies exhibit a wide range from +4.2 to +12.9‰ with an average value of +7.0‰. The δ18O values of H2O estimated from δ18O values of quartz, barite and calcite confirm the oxygen isotopic shift to near meteoric water trend, which support the incorporation of meteoric water. Salinity of the fluid inclusions decrease from >5 wt.% NaCl equivalent in the Purnama ore body to <3 wt.% NaCl equivalent in the Barani ore body, indicating different fluid systems during mineralization. The δ34S values of sulfide and sulfate in Purnama range from ? 4.2 to +5.5‰ and from +1.2 to +26.7‰, those in the Barani range from ? 4.3 to +26.4‰ and from +3.9 to +18.5‰ and those in the Horas ore body range from ? 11.8 to +3.5‰ and from +1.4 to +25.7‰, respectively. The δ34S of total bulk sulfur in southeastern ore bodies (Σδ34S) was estimated to be approximately +6‰. The estimated sulfur fugacity during formation of the Purnama and Horas ore bodies is relatively high. It was between 10?4.8 and 10?10.8 atm at 220 to 260 °C. Tellurium fugacity was between 10?7.8 and 10?9.5 atm at 260 °C and between 10?9 and 10?10.6 atm at 220 °C in the Purnama ore body. The Barani ore body was formed at lower fS2, lower than about 10?14 atm at 200 to 220 °C based on the presence of arsenopyrite and pyrrhotite in the early stage, and between 10?14 and 10?12 atm based on the existence of enargite and tennantite in the last stage. © 2016 The Society of Resource Geology  相似文献   

17.
In the Eastern Pontide Region of northeastern Turkey, volcanogenic Cu-Zn-Pb deposits of the Kuroko type are widespread within the dacitic series of the Liassic-Eocene volcano-sedimentary succession. Sulfide mineralization within the studied deposits shows four different depositional styles: disseminated ore; polymetallic stockwork ores; polymetallic massive ores; and disseminated pyrite in the hanging-wall tuff units. Only the stockwork and massive ores are economically important, and usually one or the other dominates in each ore body.

The δ34S of sulfide minerals belonging to the various styles of mineralization are in the range from ?2.6 to +5.2% (VCDT): pyrite has the highest values and the galena lowest values in agreement with the usual isotopic-fractionation trends. Massive ores have heavier sulfur-isotope composition among the mineralization styles and the heaviest values are recorded in barite- and gypsum-rich deposits. The close similarity of the δ34S among the various mineralization episodes in some deposits indicates a single sulfur source having a stable and homogenous composition.

The δ34S of sulfates fall into three groups: barites and primary gypsum (15.4 to 20.4%), close to coeval seawater sulfate; one value of barite (25.4%) heavier than coeval sea water; and values of secondary gypsum (2.2 to 8.0%) either very light compared to coeval seawater sulfate, or within the range recorded from sulfide minerals. The δ34S values of pyrite disseminated in the brecciated dacite tuff units are very close to zero and similar to the ones reported for magmatic rocks, suggesting a magmatic source for the sulfur of the earliest sulfide mineralization episode. These δ34S data are not sufficient to calculate the fraction of the reduced sulfur derived from seawater sulfate, as the associated fractionation factor cannot be constrained.  相似文献   

18.
The Yaoling tungsten deposit is a typical wolframite quartz vein‐type tungsten deposit in the South China metallogenic province. The wolframite‐bearing quartz veins mainly occur in Cambrian to Ordovician host rocks or in Mesozoic granitic rocks and are controlled by the west‐north‐west trending extensional faults. The ore mineralization mainly comprises wolframite and variable amounts of molybdenite, chalcopyrite, pyrite, fluorite, and tourmaline. Hydrothermal alteration is well developed at the Yaoling tungsten deposit, including greisenization, silicification, fluoritization, and tourmalinization. Three types of primary/pseudosecondary fluid inclusions have been identified in vein quartz, which is intimately intergrown with wolframite. These include two‐phase liquid‐rich aqueous inclusions (type I), two‐ or three‐phase CO2‐rich inclusions (type II), and type III daughter mineral‐bearing multiphase high‐salinity aqueous inclusions. Microthermometric measurements reveal consistent moderate homogenization temperatures (peak values from 200 to 280°C), and low to high salinities (1.3–39 wt % NaCl equiv.) for the type I, type II, and type III inclusions, where the CO2‐rich type II inclusions display trace amounts of CH4 and N2. The ore‐forming fluids are far more saline than those of other tungsten deposits reported in South China. The estimated maximum trapping pressure of the ore‐forming fluids is about 1230–1760 bar, corresponding to a lithostatic depth of 4.0–5.8 km. The δDH2O isotopic compositions of the inclusion fluid ranges from ?66.7 to ?47.8‰, with δ18OH2O values between 1.63 and 4.17‰, δ13C values of ?6.5–0.8‰, and δ34S values between ?1.98 and 1.92‰, with an average of ?0.07‰. The stable isotope data imply that the ore‐forming fluids of the Yaoling tungsten deposit were mainly derived from crustal magmatic fluids with some involvement of meteoric water. Fluid immiscibility and fluid–rock interaction are thought to have been the main mechanisms for tungsten precipitation at Yaoling.  相似文献   

19.
More than 200 analyses of the sulfur isotopic composition of sulfides from various terrigenous and intrusive host rocks, metasomatically altered wall rocks, and gold lodes of the Upper Kolyma region are presented. In accessory pyrite of the metaterrigenous rocks, δ34S varies from ?23.1 to +5.7‰ δ34S of pyrite and arsenopyrite from gold-quartz mineralization is within the range ?10.6 to ?0.4‰ and is close to the average δ34S of pyrite from the metaterrigenous rocks (?4.4‰). In the intrusive rocks, δ34S of pyrite varies from ?3.8 to +2.6‰ (+0.7‰, on average) and drastically differs from δ34S of arsenopyrite from postmagmatic gold-rare-metal mineralization (?7.9 to ?2.7‰; ?5.2‰, on average). The comparison of the δ34S of accessory sulfides from the host rocks with δ34S of sulfides from the gold deposits suggests that sulfur mobilized from the terrigenous sequences participated in the hydrothermal process. The results obtained are consistent with the metamorphic model of the formation of gold-quartz deposits in the Upper Kolyma region.  相似文献   

20.
The Southern Great Xing'an Range(SGXR) hosts a number of Early Cretaceous Sn and associated metal deposits, which can be divided into three principal types according to their geological characteristics: skarn type deposits, porphyry type deposits and hydrothermal vein type deposits. Fluid inclusion assemblages of different types of deposits are quite different, which represent the complexities of metallogenic process and formation mechanism. CH_4 and CO_2 have been detected in fluid inclusions from some of deposits, indicating that the ore-forming fluids are affected by materials of Permian strata. Hydrogen and oxygen isotope data from ore minerals and associated gangue minerals indicate that the initial ore fluids were dominated by magmatic waters, some of which had clearly exchanged oxygen with wall rocks during their passage through the strata. The narrow range for the δ~(34)S values presumably reflects the corresponding uniformity of the ore forming fluids, and these δ~(34)S values have been interpreted to reflect magmatic sources for the sulfur. The comparation between lead isotope ratios of ore minerals and different geological units' also reveals that deeply seated magma has been a significant source of lead in the ores.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号