共查询到20条相似文献，搜索用时 28 毫秒
1.
Electrical properties are important physical parameters of natural gas hydrate, and, specifically, resistivity has been widely used in the quantitative estimation of hydrate saturation. There are three main methods to study the electrical properties of gas hydrate-bearing sediments: experimental laboratory measurements, numerical simulation, and resistivity logging. Experimental measurements can be divided into three categories: normal electrical measurement, complex resistivity measurement, and electrical resistivity tomography. Experimental measurements show that the resistivity of hydrate-bearing sediment is affected by many factors, and its distribution as well as the hydrate saturation is not uniform; there is a distinct non-Archie phenomenon. The numerical method can simulate the resistivity of sediments by changing the hydrate occurrence state, saturation, distribution, etc. However, it needs to be combined with X-ray CT, nuclear magnetic resonance, and other imaging techniques to characterize the porous characteristics of the hydrate-bearing sediments. Resistivity well logging can easily identify hydrate layers based on their significantly higher resistivity than the background, but the field data of the hydrate layer also has a serious non-Archie phenomenon. Therefore, more experimental measurements and numerical simulation studies are needed to correct the parameters of Archie''s formula. 相似文献
2.
为寻找有资源前景的高富集天然气水合物及水合物储层的精细刻画方法,利用南海6次钻探发现的高饱和度水合物层的测井、岩心和三维地震数据,分析水合物富集层测井与地震异常特征.发现:（1）不同饱和度的孔隙与裂隙充填型水合物层的测井和地震异常不同,裂隙充填型水合物层具有各向异性;（2）受高通量流体运移的影响,在粉砂沉积物的水合物稳定带底界附近能形成中等饱和度的水合物层,识别标志为稳定带内极性与海底一致的强振幅反射,而非BSR和振幅空白;（3）裂隙充填型中等饱和度水合物层在地震剖面上表现为地层上拱和弱-中等强度振幅反射.储层-疏导-气源的耦合控制着水合物的富集特征和分布,断层与流体运移控制着细粒粉砂质沉积物中水合物的富集与厚度.基于饱和度岩相的统计学反演,能识别3 m非水合物和低饱和度水合物层及空间分布. 相似文献
3.
南海神狐海域天然气水合物声波测井速度与饱和度关系分析 总被引：3，自引：2，他引：1
利用南海北部神狐海域A站位的地震和测井资料综合分析神狐海域含天然气水合物沉积层的声波测井速度及水合物饱和度的分布特征和变化规律,并对水合物饱和度的理论计算值和实测值进行对比分析,同时对水合物稳定带的纵波速度特征与饱和度的关系进行了综合研究。结果表明：神狐海域A站位的水合物层厚度约20 m,纵波速度在1 873～2 226m/s之间,水合物饱和度在15.0%～47.3%之间变化,水合物饱和度值相对较高;受海底复杂地质因素的影响,根据岩心孔隙水的氯离子淡化程度实测的水合物饱和度随声波速度的变化并不是单一的正比例关系,而是随声波速度的升高而上下波动,波动幅度在10%～20%之间,总体趋势上随声波速度的升高而升高,并集中分布在理论曲线附近;利用热弹性理论速度模型计算并校正后的水合物饱和度随声波速度的增加而有规律地增加,水合物饱和度的理论计算值与实测数据比较吻合,说明所建立的岩石物理模型正确,模型参数选取合理。根据声波速度计算水合物饱和度这一方法可扩展到整个研究区域,并为研究区的水合物资源量评价提供基础数据。 相似文献
4.
天然气水合物是一种新型的清洁能源,具有广阔的应用前景。但在水合物开采过程中温压条件的改变会引起水合物的分解,导致含水合物沉积物胶结强度的丧失;同时,沉积物在加载过程中由于其内部微裂纹、缺陷逐渐扩展以及土颗粒间的水合物逐渐破碎也会引发含水合物沉积物的损伤,而以往对于水合物分解过程中多场耦合模型的研究忽略了沉积物结构损伤演化过程及其对耦合过程的影响。因此,基于连续损伤理论,在损伤统计本构模型中引入三参数的Weibull分布和残余强度修正系数,建立起考虑损伤阈值和残余强度影响的含水合物沉积物损伤统计本构模型;进而将本构模型嵌入到水合物分解过程的多场耦合模型中,建立了考虑含水合物沉积物损伤的温度-应力-渗流-化学（THMC）多场耦合数学模型;基于该模型讨论了含水合物沉积物结构损伤对水合物分解过程中沉积物储层的变形、压力、温度等因素的影响规律。通过计算分析发现：含水合物沉积物结构损伤对水合物分解的多场耦合过程具有显著影响,并且随着分解时间的增加,其影响逐渐增大。 相似文献
5.
《China Geology》2022,5(3):383-392
To obtain the characteristics of the gas hydrate reservoirs at GMGS3-W19, extensive geophysical logging data and cores were analyzed to assess the reservoir properties. Sediment porosities were estimated from density, neutron, and nuclear magnetic resonance (NMR) logs. Both the resistivity and NMR logs were used to calculate gas hydrate saturations, the Simandoux model was employed to eliminate the effects of high clay content determined based on the ECS and core data. The density porosity was closely in agreement with the core-derived porosity, and the neutron porosity was higher while the NMR porosity was lower than the density porosity of sediments without hydrates. The resistivity log has higher vertical resolution than the NMR log and thus is more favorable for assessing gas hydrate saturation with strong heterogeneity. For the gas hydrate reservoirs at GMGS3-W19, the porosity, gas hydrate saturation and free gas saturation was 52.7%, 42.7% and 10%, on average, respectively. The various logs provide different methods for the comprehensive evaluation of hydrate reservoir, which supports the selection of candidate site for gas hydrate production testing.©2022 China Geology Editorial Office. 相似文献
6.
地球物理测井在天然气水合物勘探中的应用 总被引：12，自引：0，他引：12
天然气水合物是一种潜在的巨大能源。美国、日本、俄罗斯等发达国家在该领域已经进行了大量的研究工作，试图从各个角度去探测天然气水合物的存在并评价其蕴藏量。地球物理测井在天然气水合物探测与储量评价领域发挥了重要作用并且随着以勘探天然气水合物为目的的钻井的增多，日益受到重视。基于国内在该领域研究较少的现状，综述了国外地球物理测井技术在天然气水合物勘探中的应用，详细介绍了常规测井方法定性识别和定量评价天然气水合物储层的孔隙度、饱和度方法和技术，基于含天然气水合物储层的碳氧比能谱测井解释模型以及成像测井在含天然气水合物井段的测井响应。并在此基础上分析了我国在该领域的研究思路。 相似文献
7.
推进天然气水合物资源开采是我国能源战略的重要任务。层状赋存形态的含水合物沉积物在目标开采储层中普遍存在,水合物开采引起的沉积物层扰动会直接诱发剪切变形影响储层的稳定性,严重制约水合物资源的安全开采。现有水合物沉积物的本构表征主要基于空间均匀分布、各向同性的材料特征假设,缺少考虑水合物沉积物的强非线性力学特性受层状赋存形态影响的本构表征方法,无法准确预测目标开采储层的应力-应变规律。本文采用均匀化理论,基于每层沉积物的弹塑性刚度矩阵构建层状形态代表体积单元的宏细观控制方程,建立了层状赋存含水合物沉积物的本构表征方法。代表体积单元内每层的沉积物模型参数可基于均质含水合物沉积物试样的三轴试验标定获取。通过将层状本构模型预测和层状沉积物三轴试验以及数值试验的应力-应变关系对比验证,本研究提出的层状本构模型可准确描述原位储层中层状赋存含水合沉积物的力学行为。 相似文献
8.
海洋含水合物地层往往是具有渗透性的多孔介质体,钻井过程中钻井液不可避免地会与它发生能量和物质交换,水基钻井液驱替侵入水合物地层和温差下热传导导致的水合物分解这二者是耦合在一起的,其侵入可描述为一个包含相变的非等温非稳态渗流扩散过程。在综合分析钻井液侵入含水合物地层特性的基础上,结合水合物开采数值模拟以及常规油气藏钻井液侵入模型,建立了一维径向钻井液侵入含水合物地层的侵入模型。利用编程,分析了钻井液侵入水合物地层时地层压力、各相饱和度和温度的分布规律。 相似文献
9.
In recent years, natural gas hydrate has attracted increasing attention worldwide as a potential alternative energy source due to its attributes of wide distribution, large reserves, and low carbon. Since the acoustic characteristics of hydrate-bearing reservoirs clearly differ from those of adjacent formations, an acoustic approach, using seismic and acoustic logging, is one of the most direct, effective and widely used methods among the identification and characterization techniques for hydrate reservoir exploration. This review of research on the influence of hydrate (content and distribution) on the acoustic properties (velocity and attenuation) of sediments in the past two decades includes experimental studies based on different hydrate formation methods and measurements, as well as rock physics models. The main problems in current research are also pointed out and future prospects discussed. 相似文献
10.
Abstract. The Nankai Trough parallels the Japanese Island, where extensive BSRs have been interpreted from seismic reflection records. High resolution seismic surveys and drilling site-survey wells conducted by the MTI in 1997, 2001 and 2002 have revealed subsurface gas hydrate at a depth of about 290 mbsf (1235 mbsl) in the easternmost part of Nankai Trough. The MITI Nankai Trough wells were drilled in late 1999 and early 2000 to provide physical evidence for the existence of gas hydrate. During field operations, continuous LWD and wire-line well log data were obtained and numerous gas hydrate-bearing cores were recovered. Subsequence sedimentologic and geochemical analyses performed on the cores revealed important geologic controls on the formation and preservation of natural gas hydrate. This knowledge is crucial to predicting the location of other hydrate deposits and their eventual energy resource. Pore-space gas hydrates reside in sandy sediments from 205 to 268 mbsf mostly filling intergranular porosity. Pore waters chloride anomalies, core temperature depression and core observations on visible gas hydrates confirm the presence of pore-space hydrates within moderate to thick sand layers. Gas hydrate-bearing sandy strata typically were 10 cm to a meter thick. Gas hydrate saturations are typically between 60 and 90 % throughout most of the hydrate-dominant sand layers, which are estimated by well log analyses as well as pore water chloride anomalies.
It is necessary for evaluating subfurface fluid dlow behavious to know both porosity and permeability of gas hydrate-bearing sand to evaluate subsurface fluid flow behaviors. Sediment porosities and pore-size distributions were obtained by mercury porosimetry, which indicate that porosities of gas hydrate-bearing sandy strata are approximately 40 %. According to grain size distribution curves, gas hydrate is dominant in fine- to very fine-grained sandy strata. 相似文献
It is necessary for evaluating subfurface fluid dlow behavious to know both porosity and permeability of gas hydrate-bearing sand to evaluate subsurface fluid flow behaviors. Sediment porosities and pore-size distributions were obtained by mercury porosimetry, which indicate that porosities of gas hydrate-bearing sandy strata are approximately 40 %. According to grain size distribution curves, gas hydrate is dominant in fine- to very fine-grained sandy strata. 相似文献
11.
含水合物的沉积物力学参数是水合物储层稳定性评价的基础数据。我国南海神狐海域含水合物的沉积物中含大量的黏土,深入了解黏土矿物对沉积物力学特性的影响对水合物开采具有十分重要的意义。基于PFC三轴压缩模拟,首先分析了沉积物中不含水合物时,黏土矿物颗粒特征的力学效应,然后分析了水合物对颗粒的胶结作用和围压对沉积物力学特性的影响。结果表明,不含水合物模型的偏应力-应变曲线呈明显的应变硬化特征。黏土矿物的含量、颗粒形状和排列对沉积物三轴压缩特性具有显著影响。黏土矿物含量的增多对沉积物力学强度具有明显的降低作用,黏土矿物形状为条形的沉积物强度和弹性模量要明显高于圆颗粒模型,在细观上受颗粒平均接触数影响,条形黏土颗粒的定向排列使模型的力学参数具有各向异性。水合物对颗粒的胶结作用可显著提高模型的峰值强度和弹性模量,随着颗粒胶结程度的增大和围压的减小,含水合物的沉积物的破坏方式由塑性破坏向脆性破坏转换。 相似文献
12.
The methane hydrate formation and the resource estimate resulting from free gas migration in seeping seafloor hydrate stability zone 总被引：3，自引：0，他引：3
Jinan Guan Deqing Liang Nengyou Wu Shuanshi Fan 《Journal of Asian Earth Sciences》2009,36(4-5):277-288
It is a typical multiphase flow process for hydrate formation in seeping seafloor sediments. Free gas can not only be present but also take part in formation of hydrate. The volume fraction of free gas in local pore of hydrate stable zone (HSZ) influences the formation of hydrate in seeping seafloor area, and methane flux determines the abundance and resource of hydrate-bearing reservoirs. In this paper, a multiphase flow model including water (dissolved methane and salt)-free gas hydrate has been established to describe this kind of flow-transfer-reaction process where there exists a large scale of free gas migration and transform in seafloor pore. In the order of three different scenarios, the conversions among permeability, capillary pressure, phase saturations and salinity along with the formation of hydrate have been deducted. Furthermore, the influence of four sorts of free gas saturations and three classes of methane fluxes on hydrate formation and the resource has also been analyzed and compared. Based on the rules drawn from the simulation, and combined information gotten from drills in field, the methane hydrate(MH) formation in Shenhu area of South China Sea has been forecasted. It has been speculated that there may breed a moderate methane flux below this seafloor HSZ. If the flux is about 0.5 kg m−2 a−1, then it will go on to evolve about 2700 ka until the hydrate saturation in pore will arrive its peak (about 75%). Approximately 1.47 × 109 m3 MH has been reckoned in this marine basin finally, is about 13 times over preliminary estimate. 相似文献
13.
深海水合物赋存于一定的温度和压力环境下,降压开采时降压速率对分解产气速率和储层变形特性影响显著。利用浙江大学自主研发的水合物降压开采试验装置,通过伺服控制降压速率,初步开展了水合物储层模型降压开采试验,研究了储层温度场、孔压场、产气量等的响应特性,探讨了降压速率对产气效率和储层变形特性的影响规律。试验表明：水合物竖井降压开采时,开采井周围储层温度率先下降,分解域由井周逐步向周围发展。适当提高降压速率能够提高储层开采效率,但降压速率过快时易导致水合物重生成,反而不利于水合物高效持续稳定开采,开采时应选择合理的降压速率以达到最优产气效率。开采过程中根据储层孔隙与外界连通程度,储层孔隙状态可分为完全封闭型、局部封闭型和开放型3种类型。储层开采试验完成后,浅层土体出现 3 种不同变形特征的区域：I 区为井周土层,呈漏斗型下陷;II 区土层平坦,无明显扰动痕迹;III 区为边界土层,该处水气产出受阻导致部分气体向上迁移引起土丘状隆起带出现。这些变形特征与气体在储层中的迁移路径和运移模式相关。通过相似性分析,给出了模型与原型分解时间和产气量等的对应关系。 相似文献
14.
目前,国内外学者对钻井液侵入水合物地层的室内实验模拟研究停留在较小尺度上且可靠性难以验证,尚需利用与实际地层物性参数较为贴近的沉积物模型, 开展大尺度的实验模拟,为改善水合物地层钻井过程中钻井液工艺和测井准确识别与评价水合物储层提供依据.根据墨西哥湾水合物地层主要物性参数指标压制了相应的人造岩心,进行了人造岩心钻井液侵入实验.结果表明:水合物在加热分解过程中,温度与压力呈上升趋势,而电阻率先升高后下降,水合物相平衡条件不仅与温压条件有关,还受孔隙水盐度不断变化的影响。钻井液侵入岩心过程中,压力的传递速率快于热量的传递,易使原始岩心孔隙中的水、气在压力升高而温度尚未改变的情况下生成二次水合物.钻井液温度是水合物分解的主要因素,而压差有利于提高孔隙水压力,保持水合物的稳定.高密度钻井液虽有利于形成高压差和抑制水合物在钻井液中形成,但也会导致钻井液低侵并使井周水合物更易分解.因此,在实际水合物地层钻井中,为了减少钻井安全事故,应在安全密度窗口范围内尽可能提高钻井液密度,选用温度较低的钻井液并加入一定量的动力学抑制剂或防漏失剂.电阻率测井应该选用随钻测井方式或者深侧向测井值,从而避免因水合物分解导致的测井失真. 相似文献
15.
海底天然气水合物(以下简称水合物)的开采会劣化储层的力学性质,威胁钻井平台、破坏开采井甚至可能诱发地质灾害。为探究含水合物沉积物的力学特性及开采扰动下水合物储层的力学强度劣化机理,本文搭建了一套含天然气水合物土水-力特性联合测试装置,主要包括:压力室、压力控制系统,注/除气系统,温度控制系统,数据采集及人机交互管理系统。该装置可实现不同条件下含水合物沉积物试样的合成,并可开展渗透试验、等向压缩试验、以及不同应力路径下三轴压缩试验测试。以细砂作为赋存介质,采用富气法制备含天然气水合物沉积物试样,对其进行了一系列水-力特性试验测试,并对结果进行了简要地分析。这些试验结果证实了装置测试含水合物沉积物水-力学特性的功能和可靠性。 相似文献
16.
《China Geology》2023,6(2):208-215
The Qilian Mountain permafrost area located in the northern of Qinghai-Tibet Plateau is a favorable place for natural gas hydrate formation and enrichment, due to its well-developed fractures and abundant gas sources. Understanding the formation and distribution of multi-component gas hydrates in fractures is crucial in accurately evaluating the hydrate reservoir resources in this area. The hydrate formation experiments were carried out using the core samples drilled from hydrate-bearing sediments in Qilian Mountain permafrost area and the multi-component gas with similar composition to natural gas hydrates in Qilian Mountain permafrost area. The formation and distribution characteristics of multi-component gas hydrates in core samples were observed in situ by X-ray Computed Tomography (X-CT) under high pressure and low temperature conditions. Results show that hydrates are mainly formed and distributed in the fractures with good connectivity. The ratios of volume of hydrates formed in fractures to the volume of fractures are about 96.8% and 60.67% in two different core samples. This indicates that the fracture surface may act as a favorable reaction site for hydrate formation in core samples. Based on the field geological data and the experimental results, it is preliminarily estimated that the inventory of methane stored in the fractured gas hydrate in Qilian Mountain permafrost area is about 8.67×1013 m3, with a resource abundance of 8.67×108 m3/km2. This study demonstrates the great resource potential of fractured gas hydrate and also provides a new way to further understand the prospect of natural gas hydrate and other oil and gas resources in Qilian Mountain permafrost area.©2023 China Geology Editorial Office. 相似文献
17.
Subsurface Occurrence of Natural Gas Hydrate in the Nankai Trough Area: Implication for Gas Hydrate Concentration 总被引：2，自引：0，他引：2
Abstract. The Nankai Trough runs along the Japanese Islands, where extensive BSRs have been recognized in its forearc basins. High resolution seismic surveys and site-survey wells undertaken by the MITI have revealed the gas hydrate distribution at a depth of about 290 mbsf. The MITI Nankai Trough wells were drilled in late 1999 and early 2000. The highlights were successful retrievals of abundant gas hydrate-bearing cores in a variety of sediments from the main hole and the post survey well-2, keeping the cored gas hydrate stable, and the obtaining of continuous well log data in the gas hydrate-dominant intervals from the main hole, the post survey well-1 and the post survey well-3. Gas-hydrate dominant layers were identified at the depth interval from 205 to 268 mbsf. Pore-space hydrate, very small in size, was recognized mostly filling intergranular pores of sandy sediments. Anomalous chloride contents in extracted pore water, core temperature depression, core observations as well as visible gas hydrates confirmed the presence of pore-space hydrates within moderate to thick sand layers. Gas hydrate-bearing sandy strata typically were 10 cm to a meter thick with porosities of about 40 %. Gas hydrate saturations in most hydrate-dominant layers were quite high, up to 90 % pore saturation.
All the gas hydrate-bearing cores were subjected to X-ray CT imagery measurements for observation of undisturbed sedimentary textures and gas-hydrate occurrences before being subjected to other analyses, such as (1) petrophysical properties, (2) biostratigraphy, (3) geochemistry, (4) microbiology and (5) gas hydrate characteristics. 相似文献
All the gas hydrate-bearing cores were subjected to X-ray CT imagery measurements for observation of undisturbed sedimentary textures and gas-hydrate occurrences before being subjected to other analyses, such as (1) petrophysical properties, (2) biostratigraphy, (3) geochemistry, (4) microbiology and (5) gas hydrate characteristics. 相似文献
18.
Recent pore-scale observations and geomechanical investigations suggest the lack of true cohesion in methane hydrate-bearing sediments (MHBSs) and propose that their mechanical behavior is governed by kinematic constrictions at pore-scale. This paper presents a constitutive model for MHBS, which does not rely on physical bonding between hydrate crystals and sediment grains but on the densification effect that pore invasion with hydrate has on the sediment mechanical properties. The Hydrate-CASM extends the critical state model Clay and Sand Model (CASM) by implementing the subloading surface model and introducing the densification mechanism. The model suggests that the decrease of the sediment available void volume during hydrate formation stiffens its structure and has a similar mechanical effect as the increase of sediment density. In particular, the model attributes stress-strain changes observed in MHBS to the variations in sediment available void volume with hydrate saturation and its consequent effect on isotropic yield stress and swelling line slope. The model performance is examined against published experimental data from drained triaxial tests performed at different confining stress and with distinct hydrate saturation and morphology. Overall, the simulations capture the influence of hydrate saturation in both the magnitude and trend of the stiffness, shear strength, and volumetric response of synthetic MHBS. The results are validated against those obtained from previous mechanical models for MHBS that examine the same experimental data. The Hydrate-CASM performs similarly to previous models, but its formulation only requires one hydrate-related empirical parameter to express changes in the sediment elastic stiffness with hydrate saturation. 相似文献
19.
基于声波测井的冻土区孔隙型水合物储层水合物饱和度估算方法 总被引：2，自引：0，他引：2
水合物饱和度参数的准确计算对于水合物资源量的评价至关重要。本文提出利用超声波测井资料与等效介质模型相结合的方法,可有效评价祁连山冻土区孔隙型水合物储层水合物饱和度变化特征,并在典型孔隙型水合物钻孔DKXX 13进行了应用。基于等效介质理论的弹性波速度模型正演模拟的纵波速度相比基于双相介质理论的弹性波速度模型更加吻合实际测井纵波速度,可用于分析孔隙型水合物储层的纵波速度特征;通过正演模拟的纵波速度与实际测井纵波速度的对比,识别出X30. 0~X30. 2m、X30. 3~X30. 4m、X31. 1~X31. 6m、X31. 7~X31. 9m、X32. 0~X32. 2m井段存在水合物,水合物赋存井段地层的水合物饱和度变化范围为13. 0%~85. 0%,平均值为61. 9%,与标准阿尔奇公式估算结果和现场岩芯测试结果基本一致。研究结果可为祁连山冻土区水合物地层测井评价与地震勘探提供理论依据和技术支撑。 相似文献
20.
三维离散元单轴试验模拟甲烷水合物宏观三轴强度特性 总被引：1，自引：0，他引：1
填充型水合物的砂性能源土试样可视为特殊的散粒体材料,即砂粒和水合物颗粒混合物,具有明显的非连续特征。为研究填充型水合物的能源土力学特性,初步探索了甲烷水合物在不同温度、反压条件下加荷模式的离散元模拟方法。离散元模拟中,将水合物块体视为由大量颗粒通过强胶结作用凝聚而成的整体,室内试验中的内部孔隙水压作用转化为水合物颗粒间的胶结力,故需要合理确定颗粒间胶结模型参数来实现反压的影响作用。通过参数反演建立了宏观强度、刚度参数与平行胶结模型的微观胶结参数间的宏、微观关系,基于已有室内甲烷水合物三轴试验资料,确定了给定温度和反压条件下的微观胶结参数取值,随后进行离散元单轴压缩试验。离散元单轴压缩试验模拟获得的水合物强度特性,与室内三轴试验结果符合较好;通过建立的宏、微观参数间的关系,实现了不同温度、反压下的水合物加荷模式的模拟。为进一步提出深海能源土离散元数值试验成样方法--孔隙填充水合物生成技术,形成含填充型水合物的能源土试样,研究其力学和变形特性奠定基础。 相似文献