首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Analysis of fault system in the high-P/T type Sambagawa metamorphic rocks of central Shikoku, southwest Japan, shows that conjugate normal faults pervasively developed in the highest-grade biotite zone (upper structural level) in three study areas (Asemi river, Oriu and Niihama areas). These conjugate normal faults consist of NE–SW to E–W striking and moderately north-dipping (set A), and NNW–SSE striking and moderately east dipping (set B) faults. The fault set A is dominant compared to the fault set B, and hence most of deformation is accommodated by the fault set A, leading to non-coaxial deformation. The sense of shear is inferred to be a top-to-the-WNW to NNW, based on the orientations of striation or quartz slickenfibre and dominant north-side down normal displacement. These transport direction by normal faulting is significantly different from that at D1 penetrative ductile flow (i.e. top-to-the-W to WNW). It has also been found that these conjugate normal faults are openly folded during the D3 phase about the axes trending NW–SE to E–W and plunging west at low-angles or horizontally, indicating that normal faulting occurred at the D2 phase. D2 normal faults, along which actinolite breccia derived from serpentinite by metasomatism sometimes occurs, perhaps formed under subgreenschist conditions (ca. 250 °C) in relation to the final exhumation of Sambagawa metamorphic rocks into the upper crustal level. The pervasive development of D2 normal faults in the upper structural level suggests that the final exhumation of Sambagawa metamorphic rocks could be caused by “distributed extension and normal faulting (removal of overburden)” in the upper crust.  相似文献   

2.
通过对郯庐断裂带南段桐城地区高压-超高压变质带详细的岩石学和构造学研究,将研究区从空间结构上划分为三个构造单元:上部低温-高压单元、中部中温-高压单元和下部超高压单元。根据研究区多期构造变形分析,共识别出了五期有区域构造地质学含义的事件(D_1-D_5):D_1代表高压-超高压变质岩中-晚三叠世同碰撞早期折返过程;D_2表征了高压-超高压变质岩晚三叠世同碰撞晚期折返过程;D_3记录了早白垩世中大别变质核杂岩的形成,也即整个中国东部晚中生代大规模伸展构造在研究区的表现;D_4可能标志着郯庐断裂走滑构造对高压-超高压造山带的叠加;D_5表现为脆性正断作用,控制了晚白垩世-古近纪潜山半地堑盆地的形成。这些结果表明了研究区所经历构造演化的复杂性,其构造几何形态很难用郯庐断裂左行平移南大别超高压变质岩来解释,也不支持桐城地区存在巨大走滑作用的证据。  相似文献   

3.
Regional variation in the P–T path of the Sambagawa metamorphic rocks, central Shikoku, Japan has been inferred from compositional zoning of metamorphic amphibole. Rocks constituting the northern part (Saruta River area) exhibit a hairpin type P–T path, where winchite/actinolite grew at the prograde stage, the peak metamorphism was recorded by the growth of barroisite to hornblende and sodic amphibole to winchite/actinolite grew at the retrograde stage. In the southern part (Asemi River area), rocks exhibit a clockwise type P–T path, where barroisite to hornblende core is rimmed by winchite to actinolite. The difference in P–T path could suggest a faster exhumation rate (i.e. more rapid decompression) in the southern than in the northern part. On the other hand, physical conditions of deformation during the exhumation stage have been independently inferred from microstructures in deformed quartz. Recrystallized quartz grains in rocks from the low‐grade (chlorite and garnet) zones are much more stretched in the southern part (aspect ratio ≥ 4.0) than in the northern part (aspect ratio< 4.0), indicating a higher strain rate in the former than in the latter. These facts may indicate that the exhumation and strain rates are correlated (i.e. the exhumation rate increases with increasing the strain rate). The difference in the exhumation rate inferred from amphibole zoning between the northern and southern parts could be explained by an extensional model involving normal faulting, where the lower plate can be exhumed faster than the upper plate due to the displacement along the fault. Furthermore, the model may explain the positive correlation between the exhumation and strain rates, because the lower plate tended to support more stress than the upper plate.  相似文献   

4.
《Geodinamica Acta》2013,26(3-4):299-316
Western Anatolia (Turkey) is a region of widespread active N-S continental extension that forms the eastern part of the Aegean extensional province. The extension in the region is expressed by two distinct/different structural styles, separated by a short-term gap: (1) rapid exhumation of metamorphic core complexes along presently low-angle ductile-brittle normal faults commenced by the latest Oligocene-Early Miocene period, and; (2) late stretching of crust and, consequent graben evolution along Plio-Quaternary high-angle normal faults, cross-cutting the pre-existing low-angle normal faults. However, current understanding of the processes (tectonic quiescence vs N-S continental compression) operating during the short-time interval is incomplete. This paper therefore reports the results of recent field mapping and structural analysis from the NE of Küçük Menderes Graben—Kiraz Basin—that shed lights on the processes operating during this short-time interval. The data includes the thrusting of metamorphic rocks of the Menderes Massif over the Mio-Pliocene sediments along WNW-ESE-trending high-angle reverse fault and the development of compressional fabrics in the metamorphic rocks of the Menderes Massif. There, the metamorphic rocks display evidence for four distinct phases of deformation: (1) southfacing top-N ductile fabrics developed at relatively high-grade metamorphic conditions, possibly during the Eocene main Menderes metamorphism (amphibolite facies) associated with top-N thrust tectonics (D1); (2) top-S and top-N ductile gentle-moderatley south-dipping extensional fabrics formed at relatively lower-grade metamorphic (possibly greenschist facies) conditions associated with the exhumation of Menderes Massif along presently low-angle normal fault plane that accompanied the first phase of extension (D2); (3) moderately north-dipping top-S ductile-brittle fabrics, present configuration of which suggest a thrust-related compression (D3); and (4) south-facing approximately E-W-trending brittle high-angle normal faults (D4) that form the youngest structures in the region. It is interpreted that D4 faults are time equivalent of graben-bounding major high-angle normal faults and they correspond to the second phase of extension in western Anatolia. The presence of thrust-related D3 compressional fabrics suggests N-S compression during the time interval between the two phases of extension (D2 and D4). The results of the present study therefore support the episodic, two-stage extension model in western Anatolia and confirm that a short-time, intervening N-S compression separated the two distinct phases.  相似文献   

5.
This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ3 axis and NW–NNW σ1 axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

6.
The Simav metamorphic core complex of the northern Menderes massif, western Turkey, consists of a plutonic (Tertiary) and metamorphic (Precambrian) core (footwall) separated from an allochthonous cover sequence (hanging wall) by a low-angle, ductile-to-brittle, extensional fault zone (i.e. detachment fault). The core rocks below the detachment fault are converted into mylonites with a thickness of a few hundred metres. Two main deformation events have affected the core rocks. The first deformational event (D1) was developed within the Precambrian metamorphic rocks. The second event (D2), associated with the Tertiary crustal extension, includes two distinct stages. Stage one is the formation of a variably developed ductile (mylonitic) deformation (D2d) in metamorphic and granitic core rocks under greenschist facies conditions. The majority of the mylonites in the study area have foliations that strike NNW to NNE and dip SW to SE. Stretched quartz and feldspar grains define the mineral lineation trending SW-NE direction and plunging gently to SW. The kinematic indicators indicate a top-to-NE sense of shear. Stage two formation of brittle deformation (D2b) that affected all core and cover rocks. D2b involves the development of cataclasites and high-angle normal faults. An overall top towards the north sense of shear for the ductile (mylonitic) fabrics in the core rocks is consistent with the N-S regional extension in western Turkey.  相似文献   

7.
In the Sambagawa schist, southwest Japan, while ductile deformation pervasively occurred at D1 phase during exhumation, low-angle normal faulting was locally intensive at D2 phase under the conditions of frictional–viscous transition of quartz (c. 300 °C) during further exhumation into the upper crustal level. Accordingly, the formation of D2 shear bands was overprinted on type I crossed girdle quartz c-axis fabrics and microstructures formed by intracrystalline plasticity at D1 phase in some quartz schists. The quartz c-axis fabrics became weak and finally random with increasing shear, accompanied by the decreasing degree of undulation of recrystallized quartz grain boundaries, which resulted from the increasing portion of straight grain boundaries coinciding with the interfaces between newly precipitated quartz and mica. We interpreted these facts as caused by increasing activity of pressure solution: the quartz grains were dissolved mostly at platy quartz–mica interface, and precipitated with random orientation and pinned by mica, thus having led to the obliteration of existing quartz c-axis fabrics. In the sheared quartz schist, the strength became reduced by the enhanced pressure solution creep not only due to the reduction of diffusion path length caused by increasing number of shear bands, but also to enhanced dissolution at the interphase boundaries.  相似文献   

8.
Peloponnesus in the south-western part of the Aegean is formed by a heterogeneous pile of alpine thrust sheets that was reworked by normal faulting from Upper Miocene to recent times. Upper Miocene–Lower Pliocene extension in Mt Parnon was accommodated by several mappable brittle detachment faults that exhibit a top-to-the-NE-ENE sense of shear. The hanging wall of the detachments comprises a number of highly tilted fault blocks containing abundant evidence of intense internal deformation by normal faulting and layer-parallel shearing contemporaneous with faulting. These fault blocks are remnants of a cohesive extensional block that slipped to the NE-ENE and broke up along high-angle normal faults that sole into or are cut by the detachments. The largest part of this block is located at the eastern edge of the metamorphic core forming the hanging wall of East Parnon high-angle normal fault that excised part of the aforementioned detachments. The lowermost metamorphic Unit of the nappe-pile does not seem to be affected by the previous extensional episode. Upper plate reconstruction shows that various units of the nappe-pile were affected by high-angle normal faults that linked to detachment faults in the weaker layers. Since the Middle-Upper Pliocene further exhumation of the metamorphic rocks has resulted in the formation of high-angle normal faults overprinting Neogene extensional structures and cut the entire nappe-pile. This new fault system tilted the earlier extensional structures and produced a NE-SW coaxial deformation of Mt Parnon.  相似文献   

9.
The island of Ios in the Cyclades, Aegean Sea, Greece, exposes high pressure metamorphic rocks that were subjected to Miocene continental extension subsequent to the Alpine collisional orogeny. The pre-Alpine history of the lower-plate of this Aegean metamorphic core complex involves intrusion of granitoids into metasediments which subsequently underwent Hercynian amphibolite facies metamorphism. During the Alpine orogeny (D2), these rocks were overthrust by the Cyclades blueschist nappe. Later, the lower plate was tectonically exhumed during Oligo-Miocene continental extension and associated plutonism. Final exhumation occurred as a result of the operation of a south-directed, crustal-scale shear zone and low-angle normal faults. This study shows that the Ios core complex reflects an intrinsic relationship between early thrusting and later extensional tectonism. Basement rocks have been exhumed from beneath the nappes that originally overrode them.  相似文献   

10.
Low‐angle detachment faults are common features in areas of large‐scale continental extension and are typically associated with metamorphic core complexes, where they separate upper plate brittle extension from lower plate ductile stretching and metamorphism. In many core complexes, the footwall rocks have been exhumed from middle to lower crustal depths, leading to considerable debate about the relationship between hangingwall and footwall rocks, and the role that detachment faults play in footwall exhumation. Here, garnet–biotite thermometry and garnet–muscovite–biotite–plagioclase barometry results are presented, together with garnet and zircon geochronology data, from seven locations within metapelitic rocks in the footwall of the northern Snake Range décollement (NSRD). These locations lie both parallel and normal to the direction of footwall transport to constrain the pre‐exhumation geometry of the footwall. To determine P–T gradients precisely within the footwall, the ΔPT method of Worley & Powell (2000) has been employed, which minimizes the contribution of systematic uncertainties to thermobarometric calculations. The results show that footwall rocks reached pressures of 6–8 kbar and temperatures of 500–650 °C, equivalent to burial depths of 23–30 km. Burial depth remains constant in the WNW–ESE direction of footwall transport, but increases from south to north. The lack of a burial gradient in the direction of footwall transport implies that the footwall rocks, which today define a sub‐horizontal datum in the direction of fault transport, also defined a sub‐horizontal datum at depth in Late Cretaceous time. This suggests that the footwall was not tilted about the normal to the fault transport direction during exhumation, and hence that the NSRD did not form as a low‐angle normal fault cutting down through the lower crust. Instead, the following evolution for the northern Snake Range footwall is proposed. (i) Mesozoic contraction caused substantial crustal thickening by duplication and folding of the miogeoclinal sequence, accompanied by upper greenschist to amphibolite facies metamorphism. (ii) About half of the total exhumation was accomplished by roughly coaxial stretching and thinning in Late Cretaceous to Early Tertiary time, accompanied by retrogression and mylonitic deformation. (iii) The footwall rocks were then ‘captured’ from the middle crust along a moderately dipping NSRD that soled into the middle crust with a rolling‐hinge geometry at both upper and lower terminations.  相似文献   

11.
In the central Aegean, the Cycladic island of Amorgos consists of two high‐pressure (HP) units, the marble‐rich Amorgos unit, which is correlated to the Mesozoic ‘cover’ sequence of the Menderes Massif, and the Cycladic Blueschist unit. New structural data show that the deformation history of the Amorgos HP‐rocks was principally governed by early Oligocene (or late Eocene)–early Miocene ductile to brittle thrusting (D1–D3) followed by middle–late Miocene oblique contractional movements (D4–D5). The D1 phase caused syn‐blueschist‐facies ductile thrusting of the Cycladic Blueschist unit over the Amorgos unit, with ambiguous kinematics. Progressive deformation under continuous NW–SE compression produced a sequence of imbricate NW‐directed thrusts (D2/3) characterized by a stratification of fault‐related rocks, with mylonitic zones (D2) giving way downwards to cataclastic zones (D3). Ductile D2 thrusting synchronous to greenschist‐facies retrogression, was accompanied by mega‐sheath folding during constrictional and general shear deformation. Brittle D3 thrusting was associated with NW‐verging F3 folds trending at a high‐angle to the transport direction. Orthogonal contraction gave way to transpression during which the compression orientation changed from NW–SE (D4) to NE–SW (D5). Back‐arc related NW–SE pure extension (D6) seems to have been established in post‐late Miocene times and related high‐angle normal faulting affected HP‐rocks only after they had already reached the uppermost crustal levels. Oligocene–early Miocene deformation history is interpreted to indicate syn‐compressional exhumation of HP‐rocks possibly in an extrusion wedge. In this case, Amorgos HP‐rocks should have occupied the base of the extrusion wedge. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

12.
大别山超高压变质岩的变形历史及折返过程   总被引：22，自引：3，他引：19       下载免费PDF全文
江来利  刘贻灿 《地质科学》1999,34(4):432-441
大别山南部的超高压变质岩在其形成及折返过程中经过5期变形。D1变形为榴辉岩相前变形,形成于扬子板块北缘陆壳基底的俯冲过程中;D2变形形成于折返初期(220-210Ma)即超高压变质岩在浮力驱动下折返至下地壳底部的过程中,变形以块状榴辉岩的糜棱岩化及层状榴辉岩和基质的紧密-同斜褶皱为特征;D3变形发生在折返中期(200-180Ma)即超高压变质岩在南北陆块持续碰撞作用下被挤出并向北逆冲折返至中地壳的过程中,变形以榴辉岩的布丁化和基质的强烈韧性剪切变形为特征;D4变形是折返晚期(130-110Ma)超高压变质岩在地壳浅部伸展体制下向南滑脱所致;在折返至近地表时,超高压变质岩受到NE向断层(D5)的切割。  相似文献   

13.
The Makran accretionary prism in SE Iran and SW Pakistan is one of the most extensive subduction accretions on Earth. It is characterized by intense folding, thrust faulting and dislocation of the Cenozoic units that consist of sedimentary, igneous and metamorphic rocks. Rock units forming the northern Makran ophiolites are amalgamated as a mélange. Metamorphic rocks, including greenschist, amphibolite and blueschist, resulted from metamorphism of mafic rocks and serpentinites. In spite of the geodynamic significance of blueschist in this area, it has been rarely studied. Peak metamorphic phases of the northern Makran mafic blueschist in the Iranshahr area are glaucophane, phengite, quartz±omphacite+epidote. Post peak minerals are chlorite, albite and calcic amphibole. Blueschist facies metasedimentary rocks contain garnet, phengite, albite and epidote in the matrix and as inclusions in glaucophane. The calculated P–T pseudosection for a representative metabasic glaucophane schist yields peak pressure and temperature of 11.5–15 kbar at 400–510 °C. These rocks experienced retrograde metamorphism from blueschist to greenschist facies (350–450 °C and 7–8 kbar) during exhumation. A back arc basin was formed due to northward subduction of Neotethys under Eurasia (Lut block). Exhumation of the high‐pressure metamorphic rocks in northern Makran occurred contemporarily with subduction. Several reverse faults played an important role in exhumation of the ophiolitic and HP‐LT rocks. The presence of serpentinite shows the possible role of a serpentinite diapir for exhumation of the blueschist. A tectonic model is proposed here for metamorphism and exhumation of oceanic crust and accretionary sedimentary rocks of the Makran area. Vast accretion of subducted materials caused southward migration of the shore.  相似文献   

14.
Faults in the upper crust initiate from pre-existing (inherited) or precursory (early-formed) structures and typically grow by the mechanical interaction and linkage of these structures. In crystalline rock, rock architecture, composition, cooling, and exhumation influence the initiation of faults, with contrasting styles observed in plutonic rocks, extrusive igneous rocks, and foliated metamorphic rocks. Brittle fault growth in granitic rock is commonly controlled by the architecture of inherited joints or preexisting dikes. In basalt, abundant joints control the surface expression of faulting, and enhanced compliance due to abundant joints leads to folding and deformation asymmetry in the fault zone. Highly reactive mafic minerals likely become rapidly evolving fault rocks. In foliated metamorphic rocks, fault initiation style is strongly influenced by strength anisotropy relative to the principal stress directions, with fracturing favored when the foliation is aligned with the directions of principal stress. The continuity of micas within the foliation also influences the micromechanics of fault initiation. Brittle kink bands are an example of a strain-hardening precursory structure unique to foliated rock. Each of these fault initiation processes produces different initial fault geometry and spatial heterogeneity that influence such properties as fault permeability and seismogenesis.  相似文献   

15.
Based on fault geometry, petrography, and geochronology of granitic rocks as well as palaeomagnetic data from the Gyeongsang Basin, two conjugate fault sets are explained as a reflection of NNE-trending right-lateral wrench tectonics. According to this interpretation, the Gaum and Yangsan fault sets correspond to antithetic faulting by R′-shear and synthetic faulting by R-shear, respectively; they have rotated clockwise and counterclockwise, respectively, due to NE–SW compression (shortening), as a result of a NNE-trending wrenching force (simple shear). During progressive deformation, NS- or NNW-trending strike–slip faulting by P-shear occurred in the Yeongyang sub-basin, and finally the Yangsan fault formed as a wrench fault bisecting the P-shear and R-shear directions. Extension of the faults (R-shear, striking ～N22°E) generated by block rotation on the east side of the Yangsan fault (wrench fault, striking ～N13°E) resulted in convex eastward deflections. We suggest that this was caused by oroclinal bending of the existing faults generated by block rotations in opposite directions and is inferred to have been closely related to the East Sea (i.e. Sea of Japan) opening.  相似文献   

16.
The main exhumation of the Menderes massif, western Turkey, occurred along an originally N‐dipping Datça–Kale main breakaway fault that controlled depositions in the Kale and the Gökova basins during the Oligocene – Early Miocene interval. The isostatically controlled upward bending of the main breakaway fault brings the lower plate rocks to the surface. In the Early Miocene, E–W‐trending N‐ and S‐dipping graben‐bounding faults fragmented the exhumed, dome‐shaped massif. The development of half grabens by rolling master fault hinges has allowed further exhumation of the central Menderes massif. After the Pliocene, high‐angle normal faults cut all of the previous structures. This model suggests that the Menderes massif is a single large metamorphic core complex that has experienced a two‐stage exhumation process.  相似文献   

17.
This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D0 phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D1, D2, D3) and extensional (D4) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.  相似文献   

18.
The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D1) and a related medium‐P metamorphism (M1) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D2/M2 largely transposes D1 structures, comprises a higher metamorphic thermal gradient than M1 (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D1/M1 by more than 20 Ma. D2‐related fabrics are refolded by D3, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D2/M2 is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D2/M2 also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D2 fabrics and the M2 metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D3 metamorphic field gradients paralleled the dome. These observations indicate that D2/M2 is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D2/M2. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.  相似文献   

19.
The Mahneshan Metamorphic Complex (MMC) is one of the Precambrian terrains exposed in the northwest of Iran. The MMC underwent two main phases of deformation (D1 and D2) and at least two metamorphic events (M1 and M2). Critical metamorphic mineral assemblages in the metapelitic rocks testify to regional metamorphism under amphibolite‐facies conditions. The dominant metamorphic mineral assemblage in metapelitic rocks (M1) is muscovite, biotite I, Garnet I, staurolite, Andalusite I and sillimanite. Peak metamorphism took place at 600–620°C and ∼7 kbar, corresponding to a depth of ca. 24 km. This was followed by decompression during exhumation of the crustal rocks up to the surface. The decrease of temperature and pressure during exhumation produced retrograde metamorphic assemblages (M2). Secondary phases such as garnet II biotite II, Andalusite II constrain the temperature and pressure of M2 retrograde metamorphism to 520–560°C and 2.5–3.5 kbar, respectively. The geothermal gradient obtained for the peak of metamorphism is 33°C km−1, which indicates that peak metamorphism was of Barrovian type and occurred under medium‐pressure conditions. The MMC followed a ‘clockwise’ P–T path during metamorphism, consistent with thermal relaxation following tectonic thickening. The bulk chemistry of the MMC metapelites shows that their protoliths were deposited at an active continental margin. Together with the presence of palaeo‐suture zones and ophiolitic rocks around the high‐grade metamorphic rocks of the MMC, these features suggest that the Iranian Precambrian basement formed by an island‐arc type cratonization. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D1, D2, and D3) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D1 deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D2 deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D2 led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D3 deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号