首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 781 毫秒
1.
Direct measurements of calcite faces were performed using in situ atomic force microscopy (AFM) to reveal the dissolution processes as a function of solution saturation state and temperature. Time-sequential AFM images demonstrated that step velocities at constant temperature increased with increasing undersaturation. The anisotropy of obtuse and acute step velocities appeared to become more significant as solutions approached equilibrium and temperature increased. At saturation state Ω > 0.02, a curvilinear boundary was formed at the intersection of two acute steps and the initially rhombohedral etch pit exhibited a nearly triangular shape. This suggests that the and steps may not belong to the calcite-aqueous solution equilibrium system. Further increase in the saturation state (Ω ? 0.3) led to a lack of etch pit formation and dissolution primarily occurred at existing steps, in accordance with Teng (2004). Analysis of step kinetics at different temperatures yielded activation energies of 25 ± 6 kJ/mol and 14 ± 13 kJ/mol for obtuse and acute steps, respectively. The inconsistencies in etch pit morphology, step anisotropy, and step activation energies from the present study with those of studies far-from-equilibrium can be explained by increased influence of the backward reaction, or growth, near-equilibrium. We propose that the backward reaction occurs preferentially at the acute-acute kink sites. The kinetics and effective activation energies of near-equilibrium calcite dissolution presented in this work provide accurate experimental data under likely CO2 sequestration conditions, and thus are crucial to the development of robust geochemical models that predict the long-term performance of mineral-trapped CO2.  相似文献   

2.
The heat of precipitation, the mean crystal size and the broadness of crystal size distribution of barium sulfate precipitating in aqueous solutions of different background electrolytes (KCl, NaCl, LiCl, NaBr or NaF), was shown to vary at constant thermodynamic driving force (supersaturation) and constant ionic strength depending on the salt present in solution. The relative inversion in the effect of respective background ions on the characteristics of barite precipitate was observed between two studied supersaturation (Ω) and ionic strength (IS) conditions. The crystal size variance (β2) increased in the presence of background electrolytes in the order LiCl < NaCl < KCl at Ω = 103.33 and IS = 0.03 M and KCl < NaCl < LiCl at Ω = 103.77 and IS = 0.09 M. At a given Ω and IS the respective size of barite crystals decreased with increasing β2 in chloride salts of different cations and remained constant in sodium salts of different anions.We suggest that ionic salts affect the kinetics of barite nucleation and growth due to their influence on water of solvation and bulk solvent structure. This idea is consistent with the hypothesis that the kinetic barrier for barium sulfate nucleation depends on the frequency of water exchange around respective building units that can be modified by additives present in solution. In electrolyte solution the relative switchover between long range electrostatic interactions and short range hydration forces, which influence the dynamics of solvent exchange between an ion solvation shell and bulk fluid, results in the observed inversion in the effect of differently hydrated salts on nucleation rates and the resulting precipitate characteristics.  相似文献   

3.
Seeded calcite growth experiments were conducted at fixed pH (10.2) and two degrees of supersaturation (Ω = 5, 16), while varying the Ca2+ to solution ratio over several orders of magnitude. The calcite growth rate and the incorporation of Sr in the growing crystals strongly depended on the solution stoichiometry. At a constant degree of supersaturation, the growth rate was highest when the solution concentration ratio, r = [Ca2+]/[], equaled one, and decreased symmetrically with increasing or decreasing values of r. This behavior is consistent with the kink growth rate theory for non-Kossel crystals, assuming that the frequency factors for attachment to kink sites are the same for the cation and anion. Measured Sr partition coefficients, DSr, ranged from 0.02 to 0.12, and correlated positively with the calcite growth rate.  相似文献   

4.
Dissolution kinetics at the aqueous solution-calcite interface at 50 °C were investigated using in situ atomic force microscopy (AFM) to reveal the influence of magnesium concentration and solution saturation state on calcite dissolution kinetics and surface morphology. Under near-equilibrium conditions, dissolved Mg2+ displayed negligible inhibitory effects on calcite dissolution even at concentrations of . Upon the introduction of , the solution saturation state with respect to calcite, , acted as a “switch” for magnesium inhibition whereby no significant changes in step kinetics were observed at Ωcalcite<0.2, whereas a sudden inhibition from Mg2+ was activated at Ωcalcite?0.2. The presence of the Ω-switch in dissolution kinetics indicates the presence of critical undersaturation in accordance with thermodynamic principles. The etch pits formed in solutions with exhibited a unique distorted rhombic profile, different from those formed in Mg-free solutions and in de-ionized water. Such unique etch pit morphology may be associated with the anisotropy in net detachment rates of counter-propagating kink sites upon the addition of Mg2+.  相似文献   

5.
The mineral barite (BaSO4) accommodates calcium in its crystal lattice, providing an archive of Ca-isotopes in the highly stable sulfate mineral. Holocene marine (pelagic) barite samples from the major ocean basins are isotopically indistinguishable from each other (δ44/40Ca = −2.01 ± 0.15‰) but are different from hydrothermal and cold seep barite samples (δ44/40Ca = −4.13 to −2.72‰). Laboratory precipitated (synthetic) barite samples are more depleted in the heavy Ca-isotopes than pelagic marine barite and span a range of Ca-isotope compositions, Δ44/40Ca = −3.42 to −2.40‰. Temperature, saturation state, , and aCa2+/aBa2+ each influence the fractionation of Ca-isotopes in synthetic barite; however, the fractionation in marine barite samples is not strongly related to any measured environmental parameter. First-principles lattice dynamical modeling predicts that at equilibrium Ca-substituted barite will have much lower 44Ca/40Ca than calcite, by −9‰ at 0 °C and −8‰ at 25 °C. Based on this model, none of the measured barite samples appear to be in isotopic equilibrium with their parent solutions, although as predicted they do record lower δ44/40Ca values than seawater and calcite. Kinetic fractionation processes therefore most likely control the extent of isotopic fractionation exhibited in barite. Potential fractionation mechanisms include factors influencing Ca2+ substitution for Ba2+ in barite (e.g. ionic strength and trace element concentration of the solution, competing complexation reactions, precipitation or growth rate, temperature, pressure, and saturation state) as well as nucleation and crystal growth rates. These factors should be considered when investigating controls on isotopic fractionation of Ca2+ and other elements in inorganic and biogenic minerals.  相似文献   

6.
Dissolution rates of limestone covered by a water film open to a CO2-containing atmosphere are controlled by the chemical composition of the CaCO3-H2O-CO2 solution at the water-mineral interface. This composition is determined by the Ca2+-concentration at this boundary, conversion of CO2 into H+ and in the solution, and by diffusional mass transport of the dissolved species from and towards the water-limestone interface. A system of coupled diffusion-reaction equations for Ca2+, , and CO2 is derived. The Ca2+ flux rates at the surface of the mineral are defined by the PWP-empirical rate law. These flux rates by the rules of stoichiometry must be equal to the flux rates of CO2 across the air-water interface. In the solution, CO2 is converted into H+ and . At low water-film thickness this reaction becomes rate limiting. The time dependent diffusion-reaction equations are solved for free drift dissolution by a finite-difference scheme, to obtain the dissolution rate of calcite as a function of the average calcium concentration in the water film. Dissolution rates are obtained for high undersaturation. The results reveal two regimes of linear dissolution kinetics, which can be described by a rate law F = αi(miceq − c), where c is the calcium concentration in the water film, ceq the equilibrium concentration with respect to calcite. For index i = 0, a fast rate law, which here is reported for the first time, is found with α0 = 3 × 10−6 m s−1 and m0 = 0.3. For c > m0ceq, a slow rate law is valid with α1 = 3 × 10−7 m  s−1 and m1 = 1, which confirms earlier work. The numbers given above are valid for film thickness of several tenths of a millimetre and at 20 °C. These rates are proven experimentally, using a flat inclined limestone plate covered by a laminar flowing water film injected at an input point with known flow rate Q and calcium concentration. From the concentration measured after flow distance x the dissolution rates are determined. These experiments have been performed at a carbon-dioxide pressure of 0.00035 atm and also of 0.01 atm. The results are in good agreement to the theoretical predictions.  相似文献   

7.
The mechanism of barite growth has been investigated in a fluid cell of an Atomic Force Microscope by passing solutions of constant supersaturation (Ω) but variable ion activity ratio (r=aBa/aSO4) over a barite substrate.The observed dependence of step-spreading velocity on solution stoichiometry can be explained by considering non-equivalent attachment frequency factors for the cation and anion. We show that the potential for two-dimensional nucleation changes under a constant thermodynamic driving force due to the kinetics of barium integration into the surface, and that the growth mode changes from preexisting step advancement to island spreading as the cation/anion activity ratio increases. Scanning electron microscopy studies of crystals grown in bulk solutions support our findings that matching the ion ratio in the fluid to that of the crystal lattice does not result in maximum growth and nucleation rates. Significantly more rapid rates correspond to solution stoichiometries where [Ba2+] is in excess with respect to [].Experiments performed in dilute aqueous solutions of methanol show that even 0.02 molar fraction of organic cosolvent in the growth solution significantly accelerates step growth velocity and nucleation rates (while keeping Ω the same as in the reference solution in water). Our observations suggest that the effect of methanol on barite growth results first of all from reduction of the barrier that prevents the Ba2+ from reaching the surface and corroborate the hypothesis that desolvation of the cation and of the surface is the rate limiting kinetic process for two-dimensional nucleation and for crystal growth.  相似文献   

8.
Although phytoliths, constituted mainly by micrometric opal, exhibit an important control on silicon cycle in superficial continental environments, their thermodynamic properties and reactivity in aqueous solution are still poorly known. In this work, we determined the solubility and dissolution rates of bamboo phytoliths collected in the Réunion Island and characterized their surface properties via electrophoretic measurements and potentiometric titrations in a wide range of pH. The solubility product of “soil” phytoliths ( at 25 °C) is equal to that of vitreous silica and is 17 times higher than that of quartz. Similarly, the enthalpy of phytoliths dissolution reaction is close to that of amorphous silica but is significantly lower than the enthalpy of quartz dissolution. Electrophoretic measurements yield isoelectric point pHIEP = 1.2 ± 0.1 and 2.5 ± 0.2 for “soil” (native) and “heated” (450 °C heating to remove organic matter) phytoliths, respectively. Surface acid-base titrations allowed generation of a 2-pK surface complexation model. Phytoliths dissolution rates, measured in mixed-flow reactors at far from equilibrium conditions at 2 ? pH ? 12, were found to be intermediate between those of quartz and vitreous silica. The dissolution rate dependence on pH was modeled within the concept of surface coordination theory using the equation:
  相似文献   

9.
Mechanisms of iron oxide transformations in hydrothermal systems   总被引：2，自引：0，他引：2  
Coexistence of magnetite and hematite in hydrothermal systems has often been used to constrain the redox potential of fluids, assuming that the redox equilibrium is attained among all minerals and aqueous species. However, as temperature decreases, disequilibrium mineral assemblages may occur due to the slow kinetics of reaction involving the minerals and fluids. In this study, we conducted a series of experiments in which hematite or magnetite was reacted with an acidic solution under H2-rich hydrothermal conditions (T = 100-250 °C, ) to investigate the kinetics of redox and non-redox transformations between hematite and magnetite, and the mechanisms of iron oxide transformation under hydrothermal conditions. The formation of euhedral crystals of hematite in 150 and 200 °C experiments, in which magnetite was used as the starting material, indicates that non-redox transformation of magnetite to hematite occurred within 24 h. The chemical composition of the experimental solutions was controlled by the non-redox transformation between magnetite and hematite throughout the experiments. While solution compositions were controlled by the non-redox transformation in the first 3 days in a 250 °C experiment, reductive dissolution of magnetite became important after 5 days and affected the solution chemistry. At 100 °C, the presence of maghemite was indicated in the first 7 days. Based on these results, equilibrium constants of non-redox transformation between magnetite and hematite and those of non-redox transformation between magnetite and maghemite were calculated. Our results suggest that the redox transformation of hematite to magnetite occurs in the following steps: (1) reductive dissolution of hematite to and (2) non-redox transformation of hematite and to magnetite.  相似文献   

10.
We investigated the dissolution behaviour of polished calcite surfaces in situ using a fluid-cell atomic force microscope. Polished calcite surfaces enabled us to study the effects of applied surface stress and crystallographic orientation on calcite dissolution pattern formation. Thin-sections of Iceland spar single-crystals polished either parallel or with a 5° miscut angle to cleavage planes were studied. Compressive surface stresses of up to 50 MPa were applied to some of the thin-section samples by means of elastic concave bending. Experiments were carried out in semi-stagnant deionized water under mainly transport limited dissolution conditions. Samples polished parallel to cleavage planes dissolved by the formation of etch-pits originating from polishing defects. The dissolution behaviour of 5° miscut surfaces was relatively unaffected by polishing defects, since no etch-pits developed in these samples. Dissolution of the miscut samples led to stepped or rippled surface patterns on the nanometer scale that coarsened during the first 30-40 min of the experiments. Possible reasons for the pattern-coarsening were: (i) progressive bunching of retreating dissolution steps and (ii) surface energy driven recrystallization (Ostwald ripening) under transport limited dissolution conditions. A flat polished miscut surface in calcite may recrystallize into a hill-and-valley structure in a (near-)saturated solution so as to lower its total surface free energy in spite of a larger surface area. No clear effect of applied stress on dissolution pattern formation has been observed.  相似文献   

11.
The dissolution and growth of uranophane [Ca(UO2)2(SiO3OH)2·5H2O] have been examined in Ca- and Si-rich test solutions at low temperatures (20.5 ± 2.0 °C) and near-neutral pH (∼6.0). Uranium-bearing experimental solutions undersaturated and supersaturated with uranophane were prepared in matrices of ∼10−2 M CaCl2 and ∼10−3 M SiO2(aq). The experimental solutions were reacted with synthetic uranophane and analyzed periodically over 10 weeks. Interpretation of the aqueous solution data permitted extraction of a solubility constant for the uranophane dissolution reaction and standard state Gibbs free energy of formation for uranophane ( kJ mol−1).  相似文献   

12.
Microorganisms and higher plants produce biogenic ligands, such as siderophores, to mobilize Fe that otherwise would be unavailable. In this paper, we study the stability of arsenopyrite (FeAsS), one of the most important natural sources of arsenic on Earth, in the presence of desferrioxamine (DFO-B), a common siderophore ligand, at pH 5. Arsenopyrite specimens from mines in Panasqueira, Portugal (100-149 μm) that contained incrustations of Pb, corresponding to elemental Pb as determined by scanning electron microscopy-electron diffraction spectroscopy (SEM-EDX), were used for this study. Batch dissolution experiments of arsenopyrite (1 g L−1) in the presence of 200 μM DFO-B at initial pH (pH0) 5 were conducted for 110 h. In the presence of DFO-B, release of Fe, As, and Pb showed positive trends with time; less dependency was observed for the release of Fe, As, and Pb in the presence of only water under similar experimental conditions. Detected concentrations of soluble Fe, As, and Pb in suspensions containing only water were found to be ca. 0.09 ± 0.004, 0.15 ± 0.003, and 0.01 ± 0.01 ppm, respectively. In contrast, concentrations of soluble Fe, As, and Pb in suspensions containing DFO-B were found to be 0.4 ± 0.006, 0.27 ± 0.009, and 0.14 ± 0.005 ppm, respectively. Notably, the effectiveness of DFO-B for releasing Pb was ca. 10 times higher than that for releasing Fe. These results cannot be accounted for by thermodynamic considerations, namely, by size-to-charge ratio considerations of metal complexation by DFO-B. As determined by SEM-EDX, elemental sample enrichment analysis supports the idea that the Fe-S subunit bond energy is limiting for Fe release. Likely, the mechanism(s) of dissolution for Pb incrustations is independent and occurs concurrently to that for Fe and As. Our results show that dissolution of arsenopyrite leads to precipitation of elemental sulfur, and is consistent with a non-enzymatic mineral dissolution pathway. Finally, speciation analyses for As indicate variability in the As(III)/As(V) ratio with time, regardless of the presence of DFO-B or water. At reaction times <30 h, As(V) concentrations were found to be 50-70%, regardless of the presence of DFO-B. These results are interpreted to indicate that transformations of As are not imposed by ligand-mediated mechanisms. Experiments were also conducted to study the dissolution behavior of galena (PbS) in the presence of 200 μM at pH0 5. Results show that, unlike arsenopyrite, the dissolution behavior of galena shows coupled increases in pH with decreases in metal solubility at t > 80 h. Oxidative dissolution mechanisms conveying sulfur oxidation bring about the production of {H+}. However, dissolution data trends for arsenopyrite and galena indicate {H+} consumption. It is plausible that the formation of Pb species is dependent on {H+} and {OH−}, namely, stable surface hydroxyl complexes of the form (pH50 5.8) and for pH values 5.8 or above.  相似文献   

13.
Steady-state muscovite dissolution rates have been measured at temperatures from 60 to 201 °C and 1 ? pH ? 10.3 as a function of reactive solution K, Si, and Al concentration. The pegmatitic muscovite used in these experiments has a composition consistent with (Na0.09, K0.86)Fe0.05Al2.92Si3.05O10(OH1.95, F0.06). All experiments were performed in titanium mixed-flow reactors. All experiments were performed at far-from-equilibrium conditions with respect to muscovite. All reactive solutions were undersaturated with respect to secondary product phases other than for some experiments which were supersaturated with respect to bohemite and diaspore; steady-state dissolution was stoichiometric for all experiments that were undersaturated with respect to these phases.The variation of rates with reactive solution composition depends on the solution pH. At pH ? 7 rates were found to decrease significantly with increasing reactive fluid Al activity but be independent of aqueous SiO2 activity. pH < 7 rates measured in the present study from 60 to 175 °C are consistent with
  相似文献   

14.
We performed a series of experiments at high pressures and temperatures to determine the partitioning of a wide range of trace elements between ilmenite (Ilm), armalcolite (Arm) and anhydrous lunar silicate melt, to constrain geochemical models of the formation of titanium-rich melts in the Moon. Experiments were performed in graphite-lined platinum capsules at pressures and temperatures ranging from 1.1 to 2.3 GPa and 1300-1400 °C using a synthetic Ti-enriched Apollo ‘black glass’ composition in the CaO-FeO-MgO-Al2O3-TiO2-SiO2 system. Ilmenite-melt and armalcolite-melt partition coefficients (D) show highly incompatible values for the rare earth elements (REE) with the light REE more incompatible compared to the heavy REE ( 0.0020 ± 0.0010 to 0.069 ± 0.010 for ilmenite; 0.0048 ± 0.0023 to 0.041 ± 0.008 for armalcolite). D values for the high field strength elements vary from highly incompatible for Th, U and to a lesser extent W (for ilmenite: 0.0013 ± 0.0008, 0.0035 ± 0.0015 and 0.039 ± 0.005, and for armalcolite 0.008 ± 0.003, 0.0048 ± 0.0022 and 0.062 ± 0.03), to mildly incompatible for Nb, Ta, Zr, and Hf (e.g. 0.28 ± 0.05 and : 0.76 ± 0.07). Both minerals fractionate the high field strength elements with DTa/DNb and DHf/DZr between 1.3 and 1.6 for ilmenite and 1.3 and 1.4 for armalcolite. Armalcolite is slightly more efficient at fractionating Hf from W during lunar magma ocean crystallisation, with DHf/DW = 12-13 compared to 6.7-7.5 for ilmenite. The transition metals vary from mildly incompatible to compatible, with the highest compatibilities for Cr in ilmenite (D ∼ 7.5) and V in armalcolite (D ∼ 8.1). D values show no clear variation with pressure in the small range covered.Crystal lattice strain modelling of D values for di-, tri- and tetravalent trace elements shows that in ilmenite, divalent elements prefer to substitute for Fe while armalcolite data suggest REE replacing Mg. Tetravalent cations appear to preferentially substitute for Ti in both minerals, with the exception of Th and U that likely substitute for the larger Fe or Mg cations. Crystal lattice strain modelling is also used to identify and correct for very small (∼0.3 wt.%) melt contamination of trace element concentration determinations in crystals.Our results are used to model the Lu-Hf-Ti concentrations of lunar high-Ti mare basalts. The combination of their subchondritic Lu/Hf ratios and high TiO2 contents requires preferential dissolution of ilmenite or armalcolite from late-stage, lunar magma ocean cumulates into low-Ti partial melts of deeper pyroxene-rich cumulates.  相似文献   

15.
  相似文献   

16.
The dissolution behavior of the barite (0 0 1) surface in pure water at 30 °C was investigated using in situ Atomic Force Microscopy (AFM), to better understand the dissolution mechanism and the microtopographical changes that occur during the dissolution, such as steps and etch pits. The dissolution of the barite (0 0 1) surface started with the slow retreat of steps, after which, about 60 min later, the <hk0> steps of one unit cell layer or multi-layers became two-step fronts (fast “f” and slow “s” steps) with a half-unit cell layer showing different retreat rates. The “f” step had a fast retreat rate (≈(14 ± 1) × 10−2 nm/s) and tended to have a jagged step edge, whereas the “s” step (≈(1.8 ± 0.1) × 10−2 nm/s) had a relatively straight front. The formation of the “f” steps led to the formation of a new one-layer step, where the front of the “s” step was overtaken by that of the immediate underlying “f” step. The “f” steps also led to the decrease of the <hk0> steps and the increase in the percentage of stable steps parallel to the [0 1 0] direction during the dissolution.Etch pits, which could be observed after about 90 min, were of three types: triangular etch pits with a depth of a half-unit cell, shallow etch pits, and deep etch pits. The triangular etch pits were bounded by the step edges parallel to [0 1 0], [1 2 0], and [] and had opposite orientations in the upper half and lower half layers. Shallow etch pits that had a depth of two or more half-unit cell layers had any two consecutive pits pointing in the opposite direction of each other. The triangular etch pit appeared to grow by simultaneously removal of a row of ions parallel to each direction from the three step edges. At first, deep etch pits were elongated in the [0 1 0] direction with a curved outline and then gradually developed to an angular form bounded by the {1 0 0}, {3 1 0}, and (0 0 1) faces. The retreat rate of the (0 0 1) face was much slower than those of the {1 0 0} and {3 1 0} and tended to separate into two rates ((0.13 ± 0.01) × 10−2 nm/s for the deep etch pits derived from a screw dislocation and (0.07 ± 0.01) × 10−2 nm/s for those from other line defects).The changes in the dissolution rate of a barite (0 0 1) surface during the dissolution were estimated using the retreat rates and densities of the various steps as well as the growth rates, density, and areas of the lateral faces of the deep etch pits that were obtained from this AFM analysis. Our results showed that the dissolution rate of the barite (0 0 1) surface gradually increased and approached the bulk dissolution rate because of the change in the main factor determining the dissolution rate from the density of the steps to the growth and the density of the deep etch pits on the surface.  相似文献   

17.
  相似文献   

18.
Chloride complexation of Cu+ controls the solubility of copper(I) oxide and sulfide ore minerals in hydrothermal and diagenetic fluids. Solubility measurements and optical spectra of high temperature CuCl solutions have been interpreted as indicating the formation of CuCl, , and complexes. However, no other monovalent cation forms tri- and tetrachloro complexes. EXAFS spectra of high temperature Cu-Cl solutions, moreover, appear to show only CuCl and complexes at T > 100 °C. To reconcile these results, I investigated the nature and stability of Cu-Cl complexes using ab initio cluster calculations and ab initio (Car-Parrinello) molecular dynamics simulations for CuCl-NaCl-H2O systems at 25 to 450 °C. Ab initio molecular dynamic simulations of 1 m CuCl in a 4 m Cl solution give a stable complex at 25 °C over 4 ps but show that the third Cl− is weakly bound. When the temperature is increased along the liquid-vapour saturation curve to 125 °C, the complex dissociates into and Cl−; only forms at 325 °C and 1 kbar. Even in a 15.6 m Cl brine at 450 °C, only the complex forms over a 4 ps simulation run.Cluster calculations with a static dielectric continuum solvation field (COSMO) were used in an attempt directly estimate free energies of complex formation in aqueous solution. Consistent with the MD simulations, the complex is slightly stable at 25 °C but decreases in stability with decreasing dielectric constant (ε). The complex is predicted to be unstable at 25 °C and becomes increasingly unstable with decreasing dielectric constant. In hydrothermal fluids (ε < 30) both the and complexes are unstable to dissociation into and Cl−.The results obtained here are at odds with recent equations of state that predict and complexes are the predominant species in hydrothermal brines. In contrast, I predict that only complexes will be significant at T > 125 °C, even in NaCl-saturated brines. The high-temperature (T > 125 °C) optical spectra of CuCl solutions and solubility measurements of Cu minerals in Cl-brines need to be reinterpreted in terms of only the CuCl and complexes.  相似文献   

19.
Most studies agree that the dissolution rate of aluminosilicates in the presence of oxalic and other simple carboxylic acids is faster than the rate with non-organic acid under the same pH. However, the mechanisms by which organic ligands enhance the dissolution of minerals are in debate. The main goal of this paper was to study the mechanism that controls the dissolution rate of kaolinite in the presence of oxalate under far from equilibrium conditions (−29 < ΔGr < −18 kcal mol−1). Two types of experiments were performed: non-stirred flow-through dissolution experiments and batch type adsorption isotherms. All the experiments were conducted at pH 2.5-3.5 in a thermostatic water-bath held at a constant temperature of 25.0, 50.0 or 70.0 ± 0.1 °C. Kaolinite dissolution rates were obtained based on the release of silicon and aluminum at steady state. The results show good agreement between these two estimates of kaolinite dissolution rate. At constant temperature, there is a general trend of increase in the overall dissolution rate as a function of the total concentration of oxalate in solution. The overall kaolinite dissolution rates in the presence of oxalate was up to 30 times faster than the dissolution rate of kaolinite at the same temperature and pH without oxalate as was observed in our previous study. Therefore, these rate differences are related to differences in oxalate and aluminum concentrations. Within the experimental variability, the oxalate adsorption at 25, 50, and 70 °C showed the same dependence on the sum of the activities of oxalate and bioxalate in solution. The change of oxalate concentration on the kaolinite surface (Cs,ox) as a function of the sum of the activities of the oxalate and bioxalate in solution may be described by the general adsorption isotherm:
  相似文献   

20.
The adsorption of phosphate onto calcite was studied in a series of batch experiments. To avoid the precipitation of phosphate-containing minerals the experiments were conducted using a short reaction time (3 h) and low concentrations of phosphate (?50 μM). Sorption of phosphate on calcite was studied in 11 different calcite-equilibrated solutions that varied in pH, PCO2, ionic strength and activity of Ca2+, and . Our results show strong sorption of phosphate onto calcite. The kinetics of phosphate sorption onto calcite are fast; adsorption is complete within 2-3 h while desorption is complete in less than 0.5 h. The reversibility of the sorption process indicates that phosphate is not incorporated into the calcite crystal lattice under our experimental conditions. Precipitation of phosphate-containing phases does not seem to take place in systems with ?50 μM total phosphate, in spite of a high degree of super-saturation with respect to hydroxyapatite (SIHAP ? 7.83). The amount of phosphate adsorbed varied with the solution composition, in particular, adsorption increases as the activity decreases (at constant pH) and as pH increases (at constant activity). The primary effect of ionic strength on phosphate sorption onto calcite is its influence on the activity of the different aqueous phosphate species. The experimental results were modeled satisfactorily using the constant capacitance model with >CaPO4Ca0 and either >CaHPO4Ca+ or > as the adsorbed surface species. Generally the model captures the variation in phosphate adsorption onto calcite as a function of solution composition, though it was necessary to include two types of sorption sites (strong and weak) in the model to reproduce the convex shape of the sorption isotherms.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号