共查询到18条相似文献，搜索用时 451 毫秒
1.
SRTM(1″)DEM在流域水文分析中的适用性研究 总被引：1，自引：0，他引：1
《国土资源遥感》2017,(2)
高精度的数字高程模型(digital elevation model,DEM)数据是流域水文分析应用的基础。美国地质调查局新发布了全球高分辨率数字高程数据产品,其空间分辨率为1″(约为30 m)。为评价该数据在流域水文分析中的适用性,以鹤壁汤河流域为实验区,以机载LiDAR DEM数据为参考,统计了SRTM(1″)数据的高程误差,分析了坡度、坡向、地表覆盖等对误差的影响;在基于地形的水文分析中,统计分析了SRTM(1″)数据误差对地形湿度指数、坡度坡长因子以及汇流动力指数等地形指数计算的影响;最后选取流域汇水区面积、最长水流路径长度、形状系数、弯曲度系数等流域特征参数对两种DEM数据提取结果进行了对比。研究表明SRTM(1″)DEM数据具有较高的精度,原始数据均方根误差为5.98 m,在消除平面位移误差后减小为4.32 m。基于地形的水文分析表明SRTM DEM与LiDAR DEM计算结果具有一定的差异,地形湿度指数平均值略高,坡度坡长因子和汇流动力指数平均值偏低,离散度偏小,这与SRTM DEM在微地貌以及高坡度地形区存在失真相关。两种DEM数据提取流域特征参数差异较小。上述研究表明SRTM DEM(1″)数据在流域水文分析中具有较大的应用潜力。 相似文献
2.
以通化地区为试验区,利用Arc/Info软件,将原始的SRTM数据生成等高线,再插值生成不同分辨率的DEM数据,提取了高程差、坡度、坡向、地形阴影数字地形信息,并根据D8算法,对流域信息进行提取。结果表明:不同分辨率的DEM在描述地形的整体变化上存在的差异很小,但高分辨率的DEM可以更好地反映出地形的细微变化;在水文模拟方面,流域网络的数量及沟壑密度与DEM的分辨率成正相关的关系,但由于高分辨率的DEM信息冗余,在水文模拟方面,提取流域网络的时候会出现生成伪沟谷的现象。 相似文献
3.
DEM分辨率是描述DEM地形精确程度的一个重要指标,同时也是决定DEM使用范围的一个主要影响因素。此处以岷江上游流域为研究区,Arc GIS为技术支撑,分析DEM空间尺度对流域特征提取的影响。首先,采用7组不同分辨率的DEM数据,通过5类不同特征参数的提取来进行DEM尺度效应的定量分析。其次,借鉴坡度中误差法思想和信息熵理论,综合分析高程、坡度和地面粗糙度来确定该地区DEM研究的分辨率合理范围。结论表明:随着DEM栅格大小的不断增大,高程区间和坡度随之减小;地面粗糙度的减小表现出地形的平坦化;信息熵所包含的内容减少;河网总长度和河网密度也随之变短变稀疏。文中岷江上游流域特征提取研究的DEM最佳空间分辨率区间为30~60 m。 相似文献
4.
以30 m空间分辨率的DEM为试验数据源,借助Python地理建模技术深入研究坡度提取的不确定性。以平均坡度来代表坡度的一般水平,将研究区划分为7种地貌类型,将30 m分辨率的DEM数据重采样成30~120 m分辨率的10组DEM数据,使用以Arc GIS平台和Python开发语言为基础的地理建模技术,定量分析平均坡度与DEM空间分辨率、区域地貌特征的关系,研究坡度提取的不确定性。结果表明:研究区内不同地貌区域提取的平均坡度都随DEM分辨率的减小而减小,衰减速率基本不变;其回归方程的常数项与所在地貌单元的沟壑密度呈二次函数变化特征;坡度提取的精度与DEM的分辨率呈正相关的关系;基于Python的地理建模技术有效地整合了坡度提取分析方法,极大地提高了分析效率;研究结果进一步验证了现有坡度提取方法的不确定性。 相似文献
5.
6.
DEM分辨率对小流域地形水文特征提取的影响 总被引：1，自引：0，他引：1
基于ArcGIS水文分析工具研究DEM分辨率对提取流域地形和水文参数的影响,选择黄土丘陵沟壑区典型小流域—韭园沟流域为实验区,该流域地形复杂,沟壑纵横,DEM分辨率变化对其地形表达有很大影响。研究表明,DEM分辨率对小流域面积、流域高程、坡向的表达或提取精度影响较小,而对坡度、河道长度、河网密度和河道分级等因子提取有较大影响。 相似文献
7.
基于栅格DEM的地形特征提取与分析 总被引：7，自引：3，他引：4
以陕北延安地区燕儿沟流域为实验样区,运用比较分析法和数理统计法进行基于栅格DEM的地形特征提取和分析,以及DEM分辨率对地形特征的影响,并计算和比较了地形特征的空间统计分布。研究表明:一个相对真实的DEM能够通过修改生成DEM的基本材料,以及对DEM进行再加工而获得。由于DEM分辨率的不同,由此得到的地形特征值(如坡度、地形指数、河网密度等)在统计特性上也会随之变化。随着DEM分辨率的降低,坡度减小,地形坦化,地形指数均值变大,流域总面积变大,子流域数量减少,河流总长度减小,河网密度降低。 相似文献
8.
在基于LRIS-3D系统建立高分辨率DEM基础上,以黄土高原丘陵沟壑区桥沟小流域为对象,利用GIS工具,以三维激光扫描系统扫描数据为基础数据,研究基于DEM的数字地形特征和水文特征的提取与分析方法。研究结果表明：与普通DEM相比,高分辨率DEM提取研究区平均坡度变小、坡度标准差变大,总体地形向平坦转化,坡面曲率增大,沟壑密度增大,更详细地描述了地表特征。对流域水文过程分析、特别是对流域汇流的参数确定及汇流模型的建立有积极作用。 相似文献
9.
小波派生多尺度DEM的精度分析 总被引：1，自引：0，他引：1
利用陕北5 m分辨率DEM数据为基本数据,对Haar小波派生出一系列更低分辨率DEM进行复合精度分析。通过等高线套合、数据中误差以及表面重合指数等方法,分析其高程采样误差与空间分布;通过分析对比其在所提取的地面坡度、沟谷网络等地形因子上的差异,分析其地形描述误差。研究结果显示:小波派生多尺度DEM在精度的颓减上呈现指数形的变异规律,当达到三级重构DEM(40 m分辨率)时,其精度仍优于1:5万(25 m分辨率)DEM。该结果对于实现地形的有效简化与掌握多尺度DEM不确定性规律具有一定的意义。 相似文献
10.
基于 DEM 对喀斯特地貌山地及水系信息的提取--以桂林阳朔县为例 总被引：1，自引：0，他引：1
以30 m分辨率的SRTM－DEM数据为基础,通过GIS的空间分析功能,首先对数据进行坡度分析,通过坡度分级法将山地与平原划分,自动提取出山地的信息,再运用碎斑处理结合TM影像对结果进行修正;其次,在ArcGIS的水文分析（ Hydrology）模块下对 DEM进行数字地形分析,提取流域特征。经分析得到了研究区域的山地及河网特征信息,并与实际地形及河流水系大致吻合,改进了传统手工和野外调查为主的提取方法,初步实现了山地、水系信息的自动提取,为研究区域社会经济更好更快地发展具有一定的参考意义。 相似文献
11.
Defining critical source areas (CSAs) of diffuse pollution in agricultural catchments depends upon the accurate delineation of hydrologically sensitive areas (HSAs) at highest risk of generating surface runoff pathways. In topographically complex landscapes, this delineation is constrained by digital elevation model (DEM) resolution and the influence of microtopographic features. To address this, optimal DEM resolutions and point densities for spatially modelling HSAs were investigated, for onward use in delineating CSAs. The surface runoff framework was modelled using the Topographic Wetness Index (TWI) and maps were derived from 0.25 m LiDAR DEMs (40 bare-earth points m−2), resampled 1 m and 2 m LiDAR DEMs, and a radar generated 5 m DEM. Furthermore, the resampled 1 m and 2 m LiDAR DEMs were regenerated with reduced bare-earth point densities (5, 2, 1, 0.5, 0.25 and 0.125 points m−2) to analyse effects on elevation accuracy and important microtopographic features. Results were compared to surface runoff field observations in two 10 km2 agricultural catchments for evaluation. Analysis showed that the accuracy of modelled HSAs using different thresholds (5%, 10% and 15% of the catchment area with the highest TWI values) was much higher using LiDAR data compared to the 5 m DEM (70–100% and 10–84%, respectively). This was attributed to the DEM capturing microtopographic features such as hedgerow banks, roads, tramlines and open agricultural drains, which acted as topographic barriers or channels that diverted runoff away from the hillslope scale flow direction. Furthermore, the identification of ‘breakthrough’ and ‘delivery’ points along runoff pathways where runoff and mobilised pollutants could be potentially transported between fields or delivered to the drainage channel network was much higher using LiDAR data compared to the 5 m DEM (75–100% and 0–100%, respectively). Optimal DEM resolutions of 1–2 m were identified for modelling HSAs, which balanced the need for microtopographic detail as well as surface generalisations required to model the natural hillslope scale movement of flow. Little loss of vertical accuracy was observed in 1–2 m LiDAR DEMs with reduced bare-earth point densities of 2–5 points m−2, even at hedgerows. Further improvements in HSA models could be achieved if soil hydrological properties and the effects of flow sinks (filtered out in TWI models) on hydrological connectivity are also considered. 相似文献
12.
This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha). 相似文献
13.
K. H. V. Durga Rao V. Bhanumurthy P. S. Roy 《Journal of the Indian Society of Remote Sensing》2009,37(4):587-600
Hydrological modelling of large river catchments is a challenging task for water resources engineers due to its complexity
in collecting and handling of both spatial and non-spatial data such as rainfall, gauge discharges, and topographic parameters.
In this paper an attempt has been made to use satellite-based rainfall products such as Climatic Prediction Centre (CPC)-National
Oceanic and Atmospheric Administration (NOAA) data for hydrological modelling of larger catchment where the limited field
rainfall data is available. Digital Elevation Models (DEM) such as Global DEM (1 km resolution) and Shuttle Radar Topography
Mission (SRTM) 3-arc second (90 m resolution) DEM have been used to extract topographic parameters of the basin for hydrological
modelling of the study area. Various popular distributed models have been used in this study for computing excess rainfall,
direct runoff from each sub-basin, and flow routing to the main outlet. The Brahmaputra basin, which is very complex both
hydraulically and hydrologically due to its shape, size, and geographical location, has been examined as study area in this
study. A landuse map derived from the satellite remote sensing data in conjunction with DEM and soil textural maps have been
used to derive various basin and channel characteristics such as each sub-basin and channel slope, roughness coefficients,
lag-time. Percentage of residual flows computed between observed flows and simulated flows using Global and SRTM DEMs are
discussed. It is found that the topographic parameters computed using SRTM DEM could improve the model accuracy in computing
flood hydrograph. Need of using better resolution satellite data products and the use of high-density field discharge observations
is discussed. 相似文献
14.
坡度随水平分辨率变化及其空间格局研究 总被引：1，自引：0，他引：1
以黄土丘陵沟壑区的县南沟流域为研究区,基于1∶1万地形图,利用ANUDEM软件生成5m到200m分辨率DEM,并利用Arc/Info中计算坡度的方法提取了各种分辨率的坡度。研究表明,随着DEM分辨率的降低,单个样点坡度值表现出不确定性,但同一坡度级所有栅格点的坡度均值呈现一定的规律性,低坡度段表现为先升高后降低,中坡度段呈现微弱变化,陡坡度段呈现对数降低趋势;沟沿线上坡度值呈比较剧烈的下降趋势、分水线和流水线上坡度缓慢下降。 相似文献
15.
In northern peatlands the thawing of permafrost increasing the active layer depth and changing the hydrology may lead to feedbacks in the climate system through changes in the biogeochemistry of carbon. We are examining this association on the Stordalen peatland complex in subarctic Sweden by analyzing a DEM derived from LiDAR‐data and the calculated TWI. The DEM, with a spatial resolution of 1 m, and the TWI are evaluated against two seasons of water level measurements from 30 sites in the peatland. The TWI is calculated with a form‐based flow routing algorithm which produces a natural flow routing pattern. In permafrost wetlands the topography is the major driver and is very important even though its magnitude is low. Site‐specific wetness (SSW) measurements from the sites were compared with the different peatland types that occur in the study area, i.e. fen, internal fen and palsa. The results showed a strong correlation between the TWI and the palsa. The TWI was better at describing general patterns than site‐specific hydrology. The evaluation of spatial patterns of TWI against SSW reveal the resolution required to develop the technique to be useful for climate change studies. 相似文献
16.
针对数字高程模型数据源不同会带来一定的不确定性和差异性的问题,选取德国某露天矿为实验区,以高精度DEM数据TanDEM-X为参照,对比了SRTM、AW3D30、ASTER GDEM与TanDEM-X数据的高程精度,分析了DEM数据的差异。结果表明:(1)露天矿区的开采和复垦活动明显地体现在了不同时期获取的DEM高程变化中;(2)在非采矿区,不同DEM数据之间具有较好的一致性,TanDEM-X数据与其他数据的高差均方根误差分别为2.64 m、5.88 m、2.99 m;(3)DEM空间分辨率越高提取得到坡度最值越大,地形描述准确性越高。研究结果为露天矿区DEM应用提供参考。 相似文献
17.
18.
M P Tripathi R K Panda S Pradhan S Sudhakar 《Journal of the Indian Society of Remote Sensing》2002,30(1-2):39-52
This study was conducted for the Nagwan watershed of the Damodar Valley Corporation (DVC), Hazaribagh, Bihar, India. Geographic Information System (GIS) was used to extract the hydrological parameters of the watershed from the remote sensing and field data. The Digital Elevation Model (DEM) was prepared using contour map (Survey of India, 1:50000 scale) of the watershed. The EASI/PACE GIS software was used to extract the topographic features and to delineate watershed and overland flow-paths from the DEM. Land use classification were generated from data of Indian Remote Sensing Satellite (IRS-1B—LISS—II) to compute runoff Curve Number (CN). Data extracted from contour map, soil map and satellite imagery, viz. drainage basin area, basin shape, average slope of the watershed, main stream channel slope, land use, hydrological soil groups and CN were used for developing an empirical model for surface runoff prediction. It was found that the model can predict runoff reasonably well and is well suited for the Nagwan watershed. Design of conservation structures can be done and their effects on direct runoff can be evaluated using the model. In broader sense it could be concluded that model can be applied for estimating runoff and evaluating its effect on structures of the Nagwan watershed. 相似文献