共查询到20条相似文献，搜索用时 640 毫秒
1.
H.W.GreenⅡ 《《地质学报》英文版》1995,69(3)
This paper deals with deformation textures and fabrics of mantle-derived xenoliths and dislocation microstructures of olivine in the upper mantle in the Penghu Islands, Taiwan. According to the calculation of the chemical composition of xenolith minerals (pyroxene), the equilibrium temperatures and pressures were 986-1116@ and 1.50-2.60 GPa, respectively. Deformation events in the upper mantle may fall into three sequences' (1) uniform steady-state flow deformation with high temperatures and low stresses, (2) shear flow deformation with high temperatures and relatively high stresses on diapiric margins of the upper mantle, and (3) extraction deformation of {110} glide bands with low temperatures and high strain rates. Deformation events and thermal structure of the upper mantle in the study area show that eastern Fujian and the Penghu Islands are characterized by very similar rheological properties of the upper mantle. Volcanism of basalts in the Penghu Islands is related to hot spots of the upper mantl 相似文献
2.
平南幔源包体中橄榄石的显微构造研究及其意义 总被引：1，自引：0，他引：1
平南玄武岩中的尖晶石二辉橄榄岩包体的平衡温度为930~980℃, 平衡深度为59~74km, 包体中橄榄石的扭折带滑移系多为(010) [100], 但也有(001) [100]的滑移系类型; 斜方辉石的滑移系为(100) [001], 它们均为高温低应变速率下的滑移系, 说明该区的上地幔主要是在高温低应变速率条件下经历了塑性变形作用.橄榄石位错组态多样, 有自由位错、位错壁、位错弓弯、缠结、{110}滑移带, 反映了上地幔的塑性变形特征.根据位错壁的大小估算, 上地幔差异流动应力为24.5~42.1MPa, 流动速率为2.93×10-17~8.36×10-16s-1, 有效粘度为1.72×1023~2.80×1024 Pa·s, 特征与中国东部新生代上地幔较为一致, 反映同处于拉张环境. 相似文献
3.
4.
福建明溪上地幔热结构及流变学特征 总被引：3，自引：0，他引：3
通过对采自福建明溪的幔源包体样品的详细研究,建立了该区上地幔的地温线,探讨其流变学特征。所获地温线高于大洋地温线,但稍低于中国东部和澳大利亚东南部地温线。由该地温线推导的壳幔边界为３８ｋｍ左右,但尖晶石二辉橄榄岩在３２ｋｍ左右即已开始出现,表明存在上地幔物质的底侵作用。同样,尖晶石二辉橄榄岩和石榴子石二辉橄榄岩包体平衡温度有所重叠,表明两者不是截然分开,其间存在有５￣１０ｋｍ的过渡带。包体的变形特 相似文献
5.
青藏高原东部壳幔速度结构和地幔变形场的研究 总被引：16，自引：0，他引：16
在青藏高原东部地球动力学问题中,笔者在文中主要考虑与地壳上地幔速度结构和地幔变形场有关的问题,它涉及当前流行的下地壳流动模型和壳-幔的耦合-解耦模型。在2000年完成的穿过川西高原和四川盆地的深地震测深剖面,揭示了川西高原的地壳结构具有地壳增厚(主要是下地壳增厚)、地壳平均速度低等特点,显示地壳的缩短与增厚的碰撞变形特征。根据川西高原上设置各爆炸点的记录截面图共同呈现PmP(莫霍界面反射波)弱能量的特点,推断在川西高原的下地壳介质具有强衰减(Qp=100～300)的性质,支持存在下地壳流动的模型。青藏高原东部和川滇西部地区的上地幔各向异性(SKS波快波偏振方向和快慢波延迟时间)的初步结果表明,这两个地区的壳-幔变形特征是不同的,尽管它们在地理位置上属于同一个板块碰撞带。在青藏高原内部的壳幔变形属于垂直连贯变形,它以缩短为主,而高原外部的地壳(或岩石圈)则相对于其下方地幔运动。在高原内部和外部之间存在一个重要的地幔变形过渡带。然而,高原内部的垂直连贯变形与高原内部存在大范围下地壳流动的模型不一致。笔者在该地区开展了近两年的宽频带流动地震观测,试图从地震记录中确定过渡带的位置和探讨它的流变性质。文中扼要回顾已经取得的结果,并介绍正在进行的研究。 相似文献
6.
橄榄岩作为上地幔的主要成分,影响着上地幔的流变学行为,其显微构造记录了岩石形成发展过程中所经受的构造事件.通过对祁连山玉石沟橄榄岩样品的镜下显微构造观察、岩石组构测定及TEM位错分析,探讨了与变形相关的温度、围压、含水性和应变速率等因素,总结该岩石的变形机制和变形历史,并推断其形成发展时大地构造环境.研究表明,玉石沟橄榄岩产自上地幔,其变形改造经历了上地幔演化和脆-韧性变形2个阶段.上地幔演化阶段橄榄石发育明显的A型原生组构,电子背散射衍射技术（EBSD）测定的橄榄石显微组构表明,该地区橄榄岩形成于高温（＞ 1200℃）、低应力（＜350 MPa）、低应变速率、低含水量的地幔浅部环境条件下;脆-韧性变形阶段叠加改造了原生A型组构,而发育明显的D型次生组构.橄榄石变形主控因素为动态恢复作用,普遍发育亚晶粒、消光带和扭折显微构造等相关组构,并与透射电镜下所观察到的位错排对应,同时还发育以微破裂为主的一套脆性变形组构,表现出两组共轭剪破裂和另一组张性破裂等现象,揭示出与韧性动态恢复现象一致的应力场方向指示. 相似文献
7.
本文针对我台微震仪记录到台湾澎湖岛西南海中的Lg波进行分析。笔者认为台湾海峡地壳有低速层的存在并影响S波的正常出现,这时利用Lg波震相,可以帮助我们定出比较可靠的震中距离。 相似文献
8.
青藏高原东部及其邻区力学耦合的岩石圈变形模式 总被引：1，自引：0，他引：1
根据青藏高原东部及其邻区布设的143个宽频带固定和流动地震台站的远震记录的SKS波分裂分析获得了各台站的快波偏振方向和快慢波之间的时间延迟。SKS分裂分析结果总体上反映了高原东部的上地幔物质流动方向,即高原内部表现为环绕喜马拉雅东构造结的顺时针旋转。在造山运动过程中有关岩石圈地壳和地幔力学耦合的造山变形方式,用从GPS和第四纪断裂滑动速率数据确定的地面变形场和由地震波各向异性数据推断的地幔变形场联合分析来定量求得。在青藏高原东部和云南、四川等地区新近快速增加的GPS和SKS波分裂观测数据,提供了对青藏高原岩石圈地幔实际变形方式的检验。这些新的数据不仅加强了高原内部力学耦合岩石圈的证据,而且也解释了高原外部相同的耦合特征。文中引入简单剪切变形和纯剪切变形的概念,用于解释高原内外不同的耦合变形特征。青藏高原和周围区域力学耦合岩石圈的垂直连贯变形有两个方面的大陆动力学含义:第一,岩石圈垂直强度剖面被一个重要的条件所约束,即要求与重力势能变化相关的应力能够从地壳传递到地幔;第二,青藏高原各向异性的空间变化反映了一个岩石圈变形的大尺度模式,以及从高原内部的简单剪切变形向高原外部的纯剪切变形的过渡带。文中提出的力学耦合岩石圈变形模型与当前已有的多种造山运动变形模型具有不同的变形含义,因此,地幔变形在青藏高原隆升过程中起主要作用。 相似文献
9.
利用中国地震台网和ISC台站记录的P波到时数据,采用球坐标系有限差分地震层析成像方法反演了南海东北部及其邻近地区壳幔三维P波速度结构,并分析了不同地质单元的构造差异及其深部特征。结果表明:南海东北部表现出陆架地区的岩石层特性,属于华南大陆向海区的延伸,岩石层厚度较大,现今不存在大规模的地幔热流活动,推测大陆边缘张裂作用仅限于地壳内部而没有延伸进入上地幔,具有非火山型大陆边缘的深部特点。中央海盆附近上地幔P波速度明显降低,与海盆下方地幔热流活动密切相关。不同的速度异常特征表明:华南大陆暨台湾地区属于欧亚大陆的正常地壳或是与菲律宾海板块相互作用产生的增厚型地壳,冲绳海槽则是弧后扩张产生的减薄型地壳。滨海断裂带作为华南大陆高速异常和南海北部高速异常的分界,代表了一定地质时期华南地块和南海地块的拼合边界。断裂附近的上地幔低速异常揭示了闽粤沿海岩浆作用的深层动力机制。吕宋岛弧、马尼拉海沟、东吕宋海槽的速度异常与其所处的特殊构造位置有密切的关系,清晰地反映出岛弧俯冲带的地壳结构差异;台湾南部至吕宋岛弧的上地幔低速异常揭示了两个重要火山链的深部构造特征,北吕宋海脊下方100 km深度的条带状高速异常有可能代表了俯冲下沉的岩石层板片。 相似文献
10.
Thermal Structure and Rheology of the Upper Mantle beneath Guangdong and Hainan Provinces, China 总被引：2，自引：0，他引：2
LIN Chuanyong SHI Lanbin Institute of Geology Seismological Bureau of China Beijing China HAN Xiuling Institute of Geology Chinese Academy of Sciences Beijing China CHEN Xiaode Institute of Geology Seismological Bureau 《Continental Dynamics》1999,(1)
１．Ｉｎｔｒｏｄｕｃｔｉｏｎ Ｔｈｅｔｈｅｒｍａｌｓｔａｔｅａｎｄｒｈｅｏｌｏｇｙｏｆｔｈｅｕｐｐｅｒｍａｎｔｌｅａｒｅｏｆｇｒｅａｔｉｍｐｏｒｔａｎｃｅｉｎｕｎｄｅｒｓｔａｎｄｉｎｇｔｈｅｓｔｒｕｃｔｕｒｅａｎｄｄｙｎａｍｉｃｓｏｆｔｈｅｌｉｔｈｏｓｐｈｅｒｅ,ａｎｄｅｖｅｎｆｏｒｉｔｓ３ｄｉｍｅｎｓｉｏｎａｌｏｒ４ｄｉｍｅｎｓｉｏｎａｌｍａｐｐｉｎｇ（Ｏ’ＲｅｉｌｌｙａｎｄＧｒｉｆｆｉｎ,１９８５;Ｏ’Ｒｅｉｌｌｙｅｔａｌ．,１９９６;Ｘｕｅｔａｌ．１９９５;Ｘｕｅｔａｌ．,１９９… 相似文献
11.
Satoru Haraguchi Teruaki Ishii Jun-Ichi Kimura 《Contributions to Mineralogy and Petrology》2008,155(5):593-618
Analysis of middle and upper Eocene rocks from the IBM forearc, including the Ogasawara and Mariana Islands, help illuminate
early arc volcanism of the proto-IBM arc. Dredged volcanic rocks from the forearc are two-pyroxene basalt to andesite, and
may be divided into two groups, tholeiite and calc-alkaline, on the basis of mineralogy, petrography, and bulk chemistry.
Tholeiites are characterized by high HFSE contents, high crystallization temperatures, and low water contents. In contrast,
the calc-alkaline rocks are characterized by low HFSE contents, low crystallization temperatures, and higher water contents.
These characteristics indicate that magma genesis for the two series differed. The tholeiites resulted from high degrees of
partial melting of slightly depleted mantle under anhydrous conditions, whereas the calc-alkaline rocks were generated by
low degrees of melting of depleted mantle under hydrous conditions. We believe that differences in mantle depletion arose
from compositional layering and fluid zonations caused by MORB volcanism and slab dehydration, respectively.
Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. 相似文献
12.
Rock mechanics observations pertinent to the rheology of the continental lithosphere and the localization of strain along shear zones 总被引：2，自引：0，他引：2
Stephen H. Kirby 《Tectonophysics》1985,119(1-4)
Emphasized in this paper are the deformation processes and rheologies of rocks at high temperatures and high effective pressures, conditions that are presumably appropriate to the lower crust and upper mantle in continental collision zones. Much recent progress has been made in understanding the flexure of the oceanic lithosphere using rock-mechanics-based yield criteria for the inelastic deformations at the top and base. At mid-plate depths, stresses are likely to be supported elastically because bending strains and elastic stresses are low. The collisional tectonic regime, however, is far more complex because very large permanent strains are sustained at mid-plate depths and this requires us to include the broad transition between brittle and ductile flow. Moreover, important changes in the ductile flow mechanisms occur at the intermediate temperatures found at mid-plate depths.Two specific contributions of laboratory rock rheology research are considered in this paper. First, the high-temperature steady-state flow mechanisms and rheology of mafic and ultramafic rocks are reviewed with special emphasis on olivine and crystalline rocks. Rock strength decreases very markedly with increases in temperature and it is the onset of flow by high temperature ductile mechanisms that defines the base of the lithosphere. The thickness of the continental lithosphere can therefore be defined by the depth to a particular isotherm Tc above which (at geologic strain rates) the high-temperature ductile strength falls below some arbitrary strength isobar (e.g., 100 MPa). For olivine Tc is about 700°–800°C but for other crustal silicates, Tc may be as low as 400°–600°C, suggesting that substantial decoupling may take place within thick continental crust and that strength may increase with depth at the Moho, as suggested by a number of workers on independent grounds. Put another way, the Moho is a rheological discontinuity. A second class of laboratory observations pertains to the general phenomenon of ductile faulting in which ductile strains are localized into shear zones. Ductile faults have been produced in experiments of five different rock types and is generally expressed as strain softening in constant-strain-rate tests or as an accelerating-creep-rate stage at constant differential stress. A number of physical mechanisms have been identified that may be responsible for ductile faulting, including the onset of dynamic recrystallization, phase changes, hydrothermal alteration and hydrolytic weakening. Microscopic evidence for these processes as well as larger-scale geological and geophysical observations suggest that ductile faulting in the middle to lower crust and upper mantle may greatly influence the distribution and magnitudes of differential stresses and the style of deformation in the overlying upper continental lithosphere. 相似文献
13.
Numerical experiments reproduce the fundamental architecture of magma-poor rifted margins such as the Iberian or Alpine margins
if the lithosphere has a weak mid-crustal channel on top of strong lower crust and a horizontal thermal weakness in the rift
center. During model extension, the upper crust undergoes distributed collapse into the rift center where the thermally weakened
portion of the model tears. Among the features reproduced by the modeling, we observe: (1) an array of tilted upper-crustal
blocks resting directly on exhumed mantle at the distal margin, (2) consistently oceanward-dipping normal faults, (3) a mid-crustal
high strain zone at the base of the crustal blocks (S-reflector), (4) new ocean floor up against a low angle normal fault
at the tip of the continent, (5) shear zones consistent with continentward-dipping reflectors in the mantle lithosphere, (6)
the mismatch frequently observed between stretching values inferred from surface extension and bulk crustal thinning at distal
margins (upper plate paradox). Rifting in the experiment is symmetric at a lithospheric scale and the above features develop
on both sides of the rift center. We discuss three controversial points in more detail: (1) weak versus strong lower crust,
(2) the deformation pattern in the mantle, and (3) the significance of detachment faults during continental breakup. We argue
that the transition from wide rifting towards narrow rifting with a pronounced polarity towards the rift center is associated
with the advective growth of a thermal perturbation in the mantle lithosphere. 相似文献
14.
Deformation, high-pressure metamorphism and exhumation of ultramafic rocks in a deep subduction/collision setting (Cabo Ortegal, NW Spain) 总被引：1，自引：0，他引：1
New petrological and microstructural data from various metaperidotite 'boudins' within large ductile shear zones in the Cabo Ortegal allochthonous complex in NW Spain have important implications for the tectonic models of the area. The peridotites (mylonitic garnet harzburgite, Ti-clinohumite and magnesite–olivine orthopyroxenite) contain mineral assemblages that equilibrated at high- to ultra-high-pressure metamorphic conditions as well as microstructures of tectonic origin formed at temperatures well above 800 °C. Olivine and orthopyroxene fabrics resulted from flow at high temperature (>1000 °C) and solid-state non-coaxial plastic flow at intermediate temperature (800–900 °C). Flow caused dynamic recrystallization and formation of moderate to strong lattice preferred orientations under low to moderate differential stresses and strain rates characteristic of upper mantle and deep crustal deformation. The microstructures and textural relationships suggest that the mylonitic garnet harzburgite represents mantle fragments with lithospheric and asthenospheric imprints, whereas the olivine orthopyroxenite resulted from serpentinite burial to depths where it acquired a characteristic high/ultra-high-pressure metamorphic signature. Both types of ultramafites converged to a common site in a subduction zone that was later incorporated during continental collision to the NW Iberian Massif as exotic, allochthonous complexes that record structural and metamorphic evidence of the earliest phases of the Hercynian orogeny. 相似文献
15.
Convergent margins, being the boundaries between colliding lithospheric plates, form the most disastrous areas in the world due to intensive, strong seismicity and volcanism. We review global geophysical data in order to illustrate the effects of the plate tectonic processes at convergent margins on the crustal and upper mantle structure, seismicity, and geometry of subducting slab. We present global maps of free-air and Bouguer gravity anomalies, heat flow, seismicity, seismic Vs anomalies in the upper mantle, and plate convergence rate, as well as 20 profiles across different convergent margins. A global analysis of these data for three types of convergent margins, formed by ocean–ocean, ocean–continent, and continent–continent collisions, allows us to recognize the following patterns. (1) Plate convergence rate depends on the type of convergent margins and it is significantly larger when, at least, one of the plates is oceanic. However, the oldest oceanic plate in the Pacific ocean has the smallest convergence rate. (2) The presence of an oceanic plate is, in general, required for generation of high-magnitude (M > 8.0) earthquakes and for generating intermediate and deep seismicity along the convergent margins. When oceanic slabs subduct beneath a continent, a gap in the seismogenic zone exists at depths between ca. 250 km and 500 km. Given that the seismogenic zone terminates at ca. 200 km depth in case of continent–continent collision, we propose oceanic origin of subducting slabs beneath the Zagros, the Pamir, and the Vrancea zone. (3) Dip angle of the subducting slab in continent–ocean collision does not correlate neither with the age of subducting oceanic slab, nor with the convergence rate. For ocean–ocean subduction, clear trends are recognized: steeply dipping slabs are characteristic of young subducting plates and of oceanic plates with high convergence rate, with slab rotation towards a near-vertical dip angle at depths below ca. 500 km at very high convergence rate. (4) Local isostasy is not satisfied at the convergent margins as evidenced by strong free air gravity anomalies of positive and negative signs. However, near-isostatic equilibrium may exist in broad zones of distributed deformation such as Tibet. (5) No systematic patterns are recognized in heat flow data due to strong heterogeneity of measured values which are strongly affected by hydrothermal circulation, magmatic activity, crustal faulting, horizontal heat transfer, and also due to low number of heat flow measurements across many margins. (6) Low upper mantle Vs seismic velocities beneath the convergent margins are restricted to the upper 150 km and may be related to mantle wedge melting which is confined to shallow mantle levels. 相似文献
16.
V. A. San’kov A. V. Parfeevets A. V. Lukhnev A. I. Miroshnichenko S. V. Ashurkov 《Geotectonics》2011,45(5):378-393
Comprehensive analysis of the parameters characterizing contemporary and neotectonic deformations of the Earth’s crust and
upper mantle developed in the Mongolia-Siberia area is presented. The orientation of the axes of horizontal deformation in
the geodetic network from the data of GPS geodesy is accepted as an indicator of current deformations at the Earth’s surface.
At the level of the middle crust, this is the orientation of the principal axes of the stress-tensors calculated from the
mechanisms of earthquake sources. The orientation of the axes of stress-tensors reconstructed on the basis of structural data
is accepted as an indicator of Late Cenozoic deformations in the upper crust. Data on seismic anisotropy of the upper mantle
derived from published sources on the results of splitting of shear waves from remote earthquakes serve as indicators of deformation
in the mantle. It is shown that the direction of extension (minimum compression) in the studied region coincides with the
direction of anisotropy of the upper mantle, the median value of which is 310–320° NW. Seismic anisotropy is interpreted as
the ordered orientation of olivine crystals induced by strong deformation owing to the flow of mantle matter. The observed
mechanical coupling of the crust and upper mantle of the Mongolia-Siberia mobile area shows that the lithospheric mantle participated
in the formation of neotectonic structural elements and makes it possible to ascertain the main processes determining the
Late Cenozoic tectogenesis in this territory. One of the main mechanisms driving neotectonic and contemporary deformations
in the eastern part of the Mongolia-Siberia area is the long-living and large-scale flow of the upper mantle matter from the
northwest to the southeast, which induces both the movement of the northern part of the continent as a whole and the divergence
of North Eurasia and the Amur Plate with the formation of the Baikal Rift System. In the western part of the region, deformation
of the lithosphere is related to collisional compression, while in the central part, it is due to the dynamic interaction
of these two large-scale processes. 相似文献
17.
Interaction between the subducting slab, the overriding continental lithosphere and mantle flow are fundamental geodynamic processes of subduction systems. Eastern China is an ideal natural laboratory to investigate the behavior and evolution of cratonic blocks within a subduction system. In this study, we investigate deformation of the upper mantle beneath eastern China. We present seismic shear wave splitting measurements from three networks consisting of over 483 broadband stations, with 157 stations giving a total of 516 results. The splitting parameters exhibit complex regional patterns but are relatively coherent within individual tectonic units. Tectonic blocks exhibited distinctive fast directions relative to regional features. The dominant attitude of fast directions for the North China Craton was subparallel to the direction of subduction, whereas fast directions for Southeastern China were perpendicular to the direction of subduction. The shear wave splitting measurements were interpreted according to a high resolution tomographic body-wave velocity model. Combining these two datasets showed that the predominant geodynamic models for the region (mantle plume, mantle wedge and flat-slab subduction models) are incompatible with the observations presented here. We suggest that the North China Craton, Yangtze Craton and the Cathaysia block have undergone different deformational events due to differing mantle flow patterns, and distinct spatial and temporal subduction histories of the Pacific and Philippine Sea plates. 相似文献
18.
M. Grégoire I. Jackson S. O'Reilly J. Cottin 《Contributions to Mineralogy and Petrology》2001,142(2):244-259
Deep-seated meta-igneous xenoliths brought to the surface by alkali basaltic magmas from the Kerguelen Islands reveal that basaltic magmas have intruded the upper mantle throughout their geological evolution. These xenoliths record volcanic activity associated with their early South East Indian Ridge location and subsequent translation to an intraplate setting over the Kerguelen Plume. The meta-igneous xenoliths sample two distinctive geochemical episodes: one is tholeiitic transitional and one is alkali basaltic. Geothermobarometry calculations provide a spatial context for the rock type sequence sampled and for interpreting petrophysical data. The garnet granulites equilibrated over a pressure range of 1.15 to 1.35 GPa and the garnet pyroxenite at 1.8 GPa. Ultrasonic measurements of compressional wave speed VP have been carried out at pressures up to 1 GPa, and densities measured for representative samples of meta-igneous xenoliths and for a harzburgite that represents the peridotitic mantle. VP and density have also been calculated using modal proportions of minerals and appropriate elastic properties for the constituent minerals. Calculated and measured VP agree well for rock types with microstructures not complicated by kelyphitic breakdown of garnet and/or pervasive grain-boundary cracking. Pyroxene granulites have measured and calculated VP within the range 7.37-7.52 km/s; calculated velocities for the garnet granulites and pyroxenites range from 7.69 to 7.99 km/s, whereas measured and calculated VP for a mantle harzburgite are 8.45 and 8.29 km/s respectively. The seismic structure observed beneath the Kerguelen Islands can be explained by (1) a mixture of underplated pyroxene granulites and ultramafic rocks responsible for the 2-3 km low velocity transitional zone below the oceanic layer 3, (2) varying proportions of granulites and pyroxenites in different regions within the upper mantle producing the lateral heterogeneities, and (3) intercalation of the granulites and pyroxenites throughout the entire upper mantle column, along with elevated temperatures, accounting for the relatively low mantle velocities (7.70-7.95 km/s). 相似文献
19.
华北克拉通从稳定到破坏的演化过程对有关地球动力学的经典理论提出了挑战,研究其独特的演化历史是固体地球科学研究的一项重要内容。上地幔矿物晶体的各向异性记录了上地幔发生构造变形的信息,研究上地幔地震波各向异性能够揭示现今和构造历史时期所发生的构造运动。本文总结了近年来作者在华北克拉通地区所进行的高密度、覆盖广泛的地震波横波分裂观测研究结果。横波分裂的快轴方向与绝对板块运动方向的不一致,以及横波分裂参数快速的空间变化特征表明了华北克拉通的SKS横波分裂主要反映上地幔的变形。观测结果表明：鄂尔多斯块体保留了克拉通较弱的各向异性特征,其西端体现了元古代克拉通拼合的变形特征; 中新生代华北克拉通破坏事件以不同的机制主导了华北克拉通中部和东部的上地幔变形,在东部地区北西-南东向的拉张应力作用使得快轴方向平行于拉张方向,而在中部则因受到较厚岩石圈的阻挡使得地幔流动改变了方向,因此造成了北东和北北东向的岩石圈拉张。 相似文献
20.
We conduct shear wave splitting measurements on waveform data from the Hi-net and the broadband F-net seismic stations in Kanto and SW Japan generated by shallow and intermediate-depth earthquakes occurring in the subducting Philippine Sea and Pacific slabs. We obtain 1115 shear wave splitting parameter pairs. The results are divided into those from the shallow (depth < 50 km) and the deep (depth > 50 km) events. The deep events beneath Kanto are further divided into PHS1 and PHS2 (upper and lower planes of the double seismic zone in the Philippine Sea slab, respectively), PAC1 and PAC2 (western and eastern Pacific slab, respectively) events. The results from the shallow events represent the crustal anisotropy, and their fast directions are more or less aligned in the σHmax directions, implying that the anisotropy is produced by the alignment of the vertical cracks in the crust induced by the compressive stresses. In Kanto, Kii Peninsula and Kyushu regions, the results from the deep events suggest a contribution from the mantle wedge anisotropy. Events from all groups beneath Kanto show NW, NE and EW fast directions. This complex pattern seems to be produced by the corner flows induced by both the WNW PAC plate subduction and the oblique NNW PHS slab subduction with the associated olivine lattice-preferred orientations (LPOs), and the anisotropy frozen in the PHS slab. The deep events beneath Kii Peninsula show NE and NW fast directions and may be produced by the corner flow produced by the NNW PHS slab subduction with the associated olivine LPOs. The NE directions might also be produced by the segregated melts in the thin layers parallel to the PHS slab subduction. The deep events beneath N Kyushu show NNW fast directions, which may result from the southeastward flow in the upper mantle inferred from the stresses in the upper plate. Results from the deep events beneath middle-south Kyushu show dominantly E–W fast directions, in both the fore- and back-arcs. They may be produced by the corner flow of the westward PHS slab subduction with the olivine LPOs. Because the source regions with multiple fast directions are not resolved in this study, further detailed analyses of shear wave splitting are necessary for a better understanding of the stress state, the induced mantle flow, and the melt-segregation processes. 相似文献