共查询到19条相似文献，搜索用时 218 毫秒
1.
东天山-北山造山带中大型韧性剪切带属性及形成演化时限与过程 总被引：10，自引：5，他引：5
塔里木盆地北缘的东天山-北山造山带中发育多条近E-W走向的大型韧性剪切带,它们构成了造山带中不同地体单元的主要边界,是碰撞造山及造山后的产物。本文在野外调查基础上,通过微观/宏观构造、几何学/运动学/动力学/年代学相结合的研究、厘定了东天山北山造山带中的7条大型韧性剪切带,阐述了剪切带的延伸、规模、剪切变形特征、变形条件以及形成与演化时限。并讨论了这7条不同类型韧性剪切带的形成过程以及东天山和北山古生代造山过程中所起的重要作用。 相似文献
2.
新疆博格达山链新生代再生造山机理--岩石圈内切层"开""合"造山带的典型代表 总被引：11，自引：0，他引：11
博格达山链是新生代成长起来的山脉，经历了古生代初始造山、中生代伸展调整、新生代复活造山的完整发展演化历程，是开展陆内造山和再生造山研究的理想之地。针对博格达山链新生代再生造山过程中无明显变质作用、岩浆活动、韧性变形等这种“强造山”“弱表现”的造山地质记录特征，根据山体新生代的变形特点、变形构造组合，并结合深部探测资料，提出“双向挤出”断块隆升的造山模式，认为深部南北向相向运移及岩石圈的深部约束是博格达山链新生代再生造山的主要动力机制。 相似文献
3.
4.
苏鲁造山带经历了多期构造事件,现今构造样式复杂多样,位于其西北缘的皇华-铁镢山地区构造变形强烈,且发育呈北东东向展布的韧性剪切带,对韧性剪切带变形特征及年代学的研究有利于加深对苏鲁造山带晚中生代构造演化的认识。本文通过详细地野外调查和显微构造特征研究,对剪切带几何学和运动学进行了分析,并结合构造年代学资料探讨韧性剪切带的构造演化过程。结果显示,研究区韧性剪切带几何学形态表现为背形,在晚侏罗世-早白垩世期间经历了两期韧性变形作用:(1)早期韧性变形是由SEE向NWW近水平的滑脱作用造成,并发育与面理产状一致的伟晶岩脉,其LA-ICP-MS锆石U-Pb谐和年龄为150.1±1.1 Ma,表明早期韧性变形启动时间不晚于150 Ma。(2)晚期韧性变形是由NNW-SSE伸展滑覆造成,同变形期白云母~(40)Ar-~(39)Ar坪年龄为137.09±0.32Ma,与反等时线年龄一致,且侵入剪切带内无变形的闪长玢岩LA-ICP-MS锆石U-Pb谐和年龄分别为123.5±0.8Ma和127.1±1.6Ma,表明晚期韧性变形启动时间不晚于137Ma,并结束于127Ma之前。综合研究区内已有的研究成果,本次研究认为苏鲁造山带西北缘早期韧性变形发生于陆内造山的晚期阶段,而晚期韧性变形发生于造山后的伸展阶段,两期构造活动反映了苏鲁造山带构造体制转换过程,该转换过程与晚中生代中国东部岩石圈的伸展减薄及太平洋板块的俯冲密切相关。 相似文献
5.
略论华北地块北缘显生宙三类不同的造山作用 总被引：3，自引：0，他引：3
华北地块北缘显生宙发育3种不同类型的造山作用。古生代,华北地块北缘处于古亚洲洋构造域,造山作用属陆缘俯冲-碰撞型,形成以EW向至NEE向为主的褶皱、逆冲推覆构造及韧性剪切带等构造类型。造山机制与古亚洲洋板块向南俯冲-碰撞导致近SN向构造动力的挤压作用密切相关。中生代,华北地块北缘处于西滨太平洋构造域,造山作用以陆内挤压型为主,形成以NE-NNE向与近EW向为主的多期不同方向的褶皱、逆冲断裂、推覆构造、韧性剪切带及局部地区的固态塑性流变构造等构造类型;造山动力以古太平洋(或Izanagi)板块西向俯冲导致NW-NWW向强烈挤压力为主。新生代,华北地块北缘虽仍属西滨太平洋构造域,但造山作用以陆内伸展型为主,裂谷作用与陆内伸展构造居主导地位,褶皱变形微弱,张性-张扭性断裂活动显著,形成现今盆-山构造地貌格局;造山动力以NW-NWW向主张应力为主。造山类型的两次重大转换分别发生于早、中三叠世与晚白垩世。 相似文献
6.
天山造山带自新元古代以来，经历了漫长而复杂的俯冲增生造山作用和陆内构造活化过程，属于典型的复合型造山带。基于近年研究进展，本文对伊犁、境内外中天山和南天山构造带前寒武纪基底、古生代沉积序列、多期陆缘弧岩浆岩和构造缝合带的变形变质特征、形成环境和年代学等进行了总结分析，梳理了天山古生代增生造山作用中的三次重要构造转换事件及其地质记录。① 伊犁南北两缘、中天山、南天山和塔里木北缘，均发育中奥陶世—志留纪的大陆弧岩浆作用，伊犁北缘、南天山 塔里木北部早古生代沉积环境发生显著变化，表明天山 塔里木北缘在中—晚奥陶世发生了从被动陆缘向活动陆缘的转换。② 伊犁南、北两缘和中天山的早古生代岩层在晚志留世—早泥盆世普遍发生了强烈的韧性变形和角闪岩相变质作用，其上不整合覆盖有弱变形未变质的晚泥盆世—石炭纪火山 沉积地层；该区域不整合是哈萨克斯坦微大陆拼合事件在研究区的构造响应，也标志着准噶尔洋和南天山洋的俯冲方式在泥盆纪发生了由前进式（东太平洋型）向后撤式（西太平洋型）的构造转换，导致伊犁和中天山在晚泥盆世—石炭纪经历了伸展背景下的大陆弧岩浆作用，在南天山 塔里木北缘则形成了一系列弧后有限洋盆。③ 天山各构造单元及其边界缝合带中普遍发育晚石炭世逆冲推覆构造和二叠纪走滑韧性剪切带、晚石炭世—早二叠世滑塌堆积和二叠纪后造山岩浆岩，指示晚石炭世—早二叠世发生了由汇聚造山向陆内构造的转换。这些构造转换事件是认识古亚洲洋各分支洋盆从初始俯冲、俯冲方式转换到俯冲终结过程的基础，也是探讨增生造山动力学的关键。 相似文献
7.
五台山早前寒武纪碰撞造山带中的韧性剪切带及其大地构造… 总被引：1，自引：0，他引：1
在五台山早前寒武纪碰撞造山带中存在的两种类型韧性剪切带，即逆冲型和伸展型剪切带。除变质程度不同外，南部和北部构造片体中的角闪岩相逆冲型韧性剪切带与中部构造片体中的绿片岩相逆冲型韧性剪切带具有相同的变形特征，它们形成于同一变形过程，是造山作用早期地壳拼合阶段的产物。伸展型韧性剪切带在整个造山带都有分布，与造山作用晚期显著增厚的地壳发生大规模纵向伸展作用相联系。 相似文献
8.
晚中生代福建沿海地区发育多期与古太平洋板块俯冲有关的岩浆活动和构造变形.福建泉州地区伸展构造变形主要表现为高角度正断层和低角度正断层或拆离断层, 古构造应力场反演指示其形成于NW-SE向伸展环境.锆石U-Pb年代学指示泉州地区发育4期岩浆活动, 分别为晚侏罗世(~155 Ma)、早白垩世中期(130~125 Ma)、早白垩世末期(~109 Ma)以及晚白垩世早期(~100 Ma之后).结合构造变形的切割关系和岩浆岩年代学, 长乐-南澳剪切带左旋韧性走滑形成于130~120 Ma, 而右旋脆性剪切形成于120~100 Ma之间.古太平洋板块向华南大陆之下的俯冲角度变化导致福建沿海地区发育晚中生代造山带.造山作用开始于早白垩世之初, 结束于早白垩世末期, 以大规模NW-SE向伸展构造发育为标志, 其从同造山挤压到后造山伸展的转换发生于~120 Ma. 相似文献
9.
板块碰撞远程效应的传播与地球层圈间的运动 总被引：4，自引：0，他引：4
我国西部大地构造活动的一大特点是新生代造山作用的复活 ,特提斯洋的最终关闭———印度板块和欧亚板块碰撞的远程效应常被解释为这种构造复活的原因。比较典型的造山带复活是天山造山带 ,天山造山带原生造山发生于古生代末期 ,古天山洋闭合塔里木板块和哈萨克斯坦板块碰撞拼贴形成碰撞造山带。原生造山的主要特点是海西期沿天山造山带发生大规模的中酸性岩浆活动和古生代沉积岩系的广泛变形变质 ,沿碰撞造山带发育有晚古生代蛇绿混杂岩带。古地磁及沉积相证据分析表明原生造山作用以后 ,塔里木板块、哈萨克斯坦板块、西伯利亚和中朝板块一… 相似文献
10.
兴蒙陆内造山带 总被引：21，自引：9，他引：12
本文提出了"兴蒙陆内造山带"的新概念(Xing-Meng Intracontinent Orogenic Belt,XMIOB),从大地构造、沉积建造、岩浆作用和变质作用等方面论述了XMIOB从晚古生代到中生代初的陆内伸展及陆内造山过程,为探讨晚古生代构造演化提供了新模式。根据对内蒙古中西部晚古生代构造格局的总体认识,可将XMIOB划分为五个构造单元即:早石炭世二连-贺根山裂谷带、晚石炭世陆表海盆地、早二叠世艾力格庙-二连伸展构造带、早-中二叠世盆岭构造带和晚二叠世索伦山-乌兰沟伸展构造带。晚石炭世末-二叠纪在兴蒙造山带基底上发育三期伸展构造:第一期见于内蒙古北部二连-艾力格庙地区,形成陆内裂谷盆地及其盆缘三角洲沉积,发育时代为302～298Ma;第二期在内蒙古中西部广泛分布,以隆起与凹陷相间分布的盆岭构造为特征,发育时代为290～260Ma;第三期见于内蒙古南部索伦山到温都尔庙乌兰沟一带,形成主动裂谷背景下的红海型小洋盆,发育时代为260～250Ma。晚古生代与伸展过程有关的岩浆活动可分四期:1)早石炭世贺根山期:以蛇绿岩为主,发育于具有前寒武纪古老基底和早古生代造山带年轻基底的陆壳伸展区; 2)晚石炭世达青牧场期:主要沿北造山带分布,以基性和酸性岩浆构成的双峰式侵火成岩为特征; 3)早二叠世大石寨期:形成的岩石种类多样,分布广泛,包括双峰式火山岩、双峰式侵入岩和碱性岩; 4)二叠纪末-三叠纪初索伦山期:形成陆缘型蛇绿岩或基性岩-超基性岩组合,产生于软流圈上涌造成的主动裂谷背景。兴蒙陆内造山带的构造变形可分为两期,第一期为晚古生代地层大范围褶皱变形,造成盆-岭构造带的缩短;第二期为沿盆-岭构造的边界强烈剪切变形,产生向东逃逸的挤出构造,其构造背景是北部蒙古-鄂霍茨克造山带和南部大别-秦岭中央造山带的远距离效应引起的被动闭合作用。兴蒙陆内造山带的变质作用分为两个阶段,早期变质作用主要表现为石炭纪期间与陆内伸展有关的低压高温变质,晚期为二叠纪末到三叠纪初区域大面积的低压绿片岩相变质以及沿构造边界的局部中-低压型低温变质。 相似文献
11.
Abstract The northern margin of the Alxa block is the junction of a tectonic units. Four first—order tectonic units are distinguished: 1. the Yagan structural zone characteristic of an immature island arc; 2. the Zhusileng—Hangwula structural zone, which was a passive continental margin in the Early Palaeozoic and was transformed into an active continental margin in the Late Palaeozoic; 3. the Shalazha structural zone characteristic of a mature island arc; 4. the Nuru—Langshan structural zone, which was a Proterozoic orogenic belt and later evolved into an extensional transitional crust in the Palaeozoic. The above—mentioned tectonic units differ remarkably in sedimentary formations, magmatic rock associations, metamorphism and geochemistry and are bounded by faults between one another. 相似文献
12.
J.E. Otamendi P.A. Castellarini M.R. Fagiano A.H. Demichelis A.M. Tibaldi 《Gondwana Research》2004,7(4):1143-1155
Crystalline rocks from the Sierra de Comechingones, eastern Sierras Pampeanas, evolved through three distinct orogenic cycles during the Eopalaeozoic: (1) the first tectono-thermal event named Pampean orogeny (550 to 505 Ma), which peaked in the Early Cambrian, was responsible for extensive metamorphism, partial melting, juvenile magmatism, rapid decompression, and persistent tectonic activity. Large part of the crustal section that was residing at middle levels (c. 27 km) was heated above 800 °C during the thermal peak stage of the Pampean orogeny; decompression of the Pampean orogen's core took place at this high temperature. The exhumation mechanism that assisted rapid uplifting combined the effects of ongoing tectonic forces with a buoyant instability created by a large amount of anatectic magmas in the middle to lower crust. (2) Beginning at the Early Ordovician, the Famatinian orogeny produced an overall shortening, causing pervasive textural reworking of the Cambrian metamorphic sequences under a high-strain regime. By being adjacent to the Famatinian magmatic arc, the western border of the Cambrian crystalline package absorbed imposed deformation along a crustal scale ductile shear zone. Within this zone, the high-grade metamorphic rocks were reworked and re-hydrated to lower temperature assemblages (<600°C and 3–6 kbar). Early Ordovician subduction-related igneous activity, even though manifested as small plutons, intruded Cambrian crystalline sequences, and experienced textural reworking during Late Famatinian tectonic exhumation. Late Famatinian convergence resulted in west-vergent ductile shear zones that placed Cambrian onto Ordovician crystalline sequences. (3) During post-Famatinian times (360–400 Ma) enduring crustal perturbation produced intra-crustal-derived granitic magmatism. West- to northwest-directed thrusting was concentrated in belts nucleated along crustal-scale tectonic boundaries formed between older tectono-stratigraphic units. As a result, Devonian anatectic granites were formed and tectonically extruded among Pampean and Famatinian crystalline sequences. The post-Famatinian event is also characterised by the intrusion of batholith-scale monzogranites into Pampean and Famatinian crystalline sequences residing in the upper crust.
Crystalline rocks currently exposed in the Sierra de Comechingones show that they crystallised and were exhumed in a setting where tectono-thermal activity lasted, even though it might have waned, until the Middle Palaeozoic. From the latest Neoproterozoic (c. 550 Ma) until the Late Devonian (c. 360 Ma) tectonic activity was intermittently acting, indicating continuous convergence along the proto-Pacific margin of Gondwana. 相似文献
13.
Tectonic Units and Their Fundamental Characteristics on the Northern Margin of the Alxa Block 总被引：6，自引：0，他引：6
Wu Tairan Geology Department China University of Geosciences Beijing He Guoqi Geology Department Peking University Jiang Minxi 《《地质学报》英文版》1993,67(4)
The northern margin of the Alxa block is the junction of a tectonic units. Four first-order tectonic units are distinguished: 1. the Yagan structural zone characteristic of an immature island arc; 2. the Zhusileng-Hangwula structural zone, which was a passive continental margin in the Early Palaeozoic and was transformed into an active continental margin in the Late Palaeozoic;3. the Shalazha structural zone characteristic of a mature island arc; 4. the Nuru-Langshan structural zone, which was a Proterozoic orogenic belt and later evolved into an extensional transtional crust in the Palaeozoic. The above-mentioned tectonic units differ remarkably in sedimentary formations, magmatic rock associations, metamorphism and geochemistry and are bounded by faults between one another. 相似文献
14.
SHU Liangshu CHARVET Jacques GUO Lingzhi LU Huafu LAURENT-CHARVET Sebastien 《《地质学报》英文版》1999,73(2):148-162
The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by "flower" strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269(5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins. 相似文献
15.
16.
A DISCUSSION ON THE GENESIS OF THE JIAMA COPPER-POLYMETALLIC DEPOSIT, MAIZHOKUNGGER, XIZANG 相似文献
17.
新疆东天山觉罗塔格地区花岗岩类年代学、构造背景及其成矿作用研究 总被引：34，自引：15，他引：19
东天山觉罗塔格地区岩浆岩非常发育,以花岗岩类分布最为广泛,对其研究还较为薄弱。本文对觉罗塔格地区主要的花岗岩类岩体系统开展了地质特征研究并进行了同位素精确测年,报道了区内16个主要花岗岩类岩体的锆石LA-ICPMS U-Pb年龄：镜儿泉岩体376.9±3.1Ma、西凤山岩体349.0±3.4Ma、石英滩岩体342±11Ma、长条山岩体337.4±2.8Ma、天目岩体320.2±3.1Ma、百灵山岩体317.7±3.7Ma、白石泉岩体303±18Ma、迪坎岩体288.0±2.5Ma、黄山岩体288±17Ma、白山东岩体284.5±4.5Ma、管道岩体284.1±5.8Ma、红石岩体282.7±4.2Ma、陇东岩体276.2±2.5Ma、多头山岩体271.7±5.5Ma、双岔沟岩体252.4±2.9Ma、土墩岩体246.2±2.6Ma,上述定年结果为研究区岩浆活动与区域构造演化及深部过程的关系研究提供了可靠的年代学支持。结合前人已有的部分年代学成果认为,觉罗塔格地区花岗岩类的形成年龄分布在386~230Ma之间,岩浆活动可分为晚泥盆世(386.5~369.5Ma)、早石炭世(349~330Ma)、晚石炭世-晚二叠世(320~252Ma)、早中三叠世(246~230Ma)等4个阶段。前3个阶段岩浆活动具有持续时间逐渐变长、岩浆活动逐渐加剧的特点,并在第三阶段达到顶峰,而第四阶段岩浆活动则明显变弱。花岗岩类岩浆活动在时空分布上表现为,自哈尔里克-大南湖岛弧带→阿奇山-雅满岛弧带→康古尔-黄山韧性剪切带,岩体侵位由早到晚; 自研究区东部→中西部→沿韧性剪切带,岩体侵位由老到新。结合区域构造演化研究成果认为,觉罗塔格地区花岗质岩浆活动与区域构造演化具有很强的耦合关系,花岗岩类在前碰撞阶段、主碰撞阶段、后碰撞阶段、板内阶段等4个构造演化阶段均有发育,与花岗岩类在时间分布上的4个阶段完全对应,其中尤以后碰撞构造演化阶段花岗岩类的分布最广泛、岩浆活动最强烈。觉罗塔格地区与4个阶段花岗岩类有关的成矿作用由早到晚具有无明显矿化→斑岩型铜矿、火山岩型铁矿→韧性剪切带型金矿、夕卡岩型银(铜)矿→斑岩-石英脉型钼矿的演化特点,其中以对应于主碰撞阶段的斑岩型铜矿和后碰撞阶段的韧性剪切带型金矿最为发育。本文系统阐述了东天山觉罗塔格地区中酸性岩体的时空格架、与区域构造演化的耦合、与成矿作用的关系,为北疆地区晚古生代特别是后碰撞背景下的岩浆演化及其成矿关系的研究提供了有力支持。 相似文献
18.
FENG Jianzhong ZENG Yishan FU ShuixingPeking University Beijing Beijing Institute of Geology for Mineral Resources Andingmenwai Beijing 《《地质学报》英文版》2000,74(3):559-564
As a typical Palaeozoic island arc system, the eastern Tianshan area, Xinjiang, is different from eastern China but similar to the Meso-Cenozoic island arc metallogenic provinces along the coast of the Pacific Ocean in metallogenic environment, geology and geochemistry. Three types of gold deposits, ductile shear zone-hosted gold deposits (Kanggur ), magmatic hydrothermal gold deposits (Jinwozi) and volcanic- or subvolcanic-hosted gold deposits (Xitan and Mazhuangshan), have been identified in this area. Regionally, gold deposits are structurally controlled by the Kanggur Tag ductile shear zone, Shaquanzi fault, Hongliuhe fault and Yamansu fault. Generally, gold mineralization occurs in the transition zones from volcanic rocks to sedimentary rocks. The horizon bearing well-developed jasper is an important indicator for gold mineralization. Each of the three types of gold deposits has its distinctive metallogenic background and geological-geochemical characteristics. 相似文献
19.
Paleozoic Accretion-Collision Events and Kinematics of Ductile Deformation in the Eastern Part of the Southern-Central Tianshan Belt, China 总被引：3，自引：0，他引：3
The Tianshan range could have been built by both late Early Paleozoic accretion and Late Paleozoic collision events. The late Early Paleozoic Aqqikkudug-Weiya suture is marked by Ordovician ophiolitic melange and a Silurian flysch sequence, high-pressure metamorphic relics, and mylonitized rocks. The Central Tianshan belt could principally be an Ordovician volcanic arc; whereas the South Tianshan belt, a back-arc basin. Macro- and microstructures, along with unconformities, provide some kinematic and chronological constraints on 2-phase ductile deformation. The earlier ductile deformation occurring at ca. 400 Ma was marked by north-verging ductile shearing, yielding granulite-bearing ophiolitic melange blocks and garnet-pyroxene-facies ductile deformation, and the later deformation, a dextral strike-slip tectonic process, occurred during the Late Carboniferous-Early Permian. Early Carboniferous molasses were deposited unconformably on pre-Carboniferous metamorphic and ductilely sheared rocks, implying t 相似文献