共查询到17条相似文献，搜索用时 439 毫秒
1.
月面形貌仿真可以为嫦娥三号着陆前地形建立及视觉导航仿真测试提供逼真的三维月面环境。利用分形随机算法并结合月面撞击坑与石块的数学分布模型,在实现月面数字地形的基础上利用纹理映射和纹理融合的方法为月面地形添加纹理,完成了月面逼真三维环境的构建。结合导航相机的外方位元素和光照条件,实现了对该仿真月面环境的模拟环拍,支撑了嫦娥三号发射前月球车导航相机数据获取、地形建立、通行代价图计算、月球车路径规划等遥操作任务过程仿真测试。测试结果表明,仿真月面三维地形具有良好的视觉效果,满足了巡视器导航相机测试验证对精细月面地形和纹理的需求,为导航相机测试验证提供了有效的月面形貌仿真数据。 相似文献
2.
全月球撞击坑识别、分类及空间分布 总被引：3，自引：1，他引：2
撞击坑是月球表面分布广泛的地貌单元,是研究月球的最直接窗口。本文以嫦娥一号卫星获取的遥感影像和DEM,以及国际天文学联合会(IAU)公布的撞击坑名录为基础数据源,以全月球表面撞击坑为研究对象,采用遥感图像处理与专家知识融合的目视解译法确定撞击坑的边界,识别出全月球表面直径大于500 m的撞击坑共计106030个,采用累积频率和与IAU公布撞击坑对比两种方法对目视解译的撞击坑进行精度评价,其识别的总体误差率为10.97%;按照形态特征指标,将全月球撞击坑分为六大类,对比分析了不同类的撞击坑影像及形貌差异性;对全月球撞击坑分类进行统计分析,得出了不同类型撞击坑在月球表面的数量与密度特征及空间分布情况。 相似文献
3.
全月球撞击坑形貌特征的识别与多指标表达 总被引：1，自引：0，他引：1
全月球撞击坑数据是支撑月表形貌研究以及月球工程探测和科学研究的重要基础性数据,其全面性、精确性是衡量一个国家科技水平甚至综合国力的重要指标。基于嫦娥一号、Clementine多光谱等探月数据,智能化人工提取了全月球106030 个直径大于500 m的撞击坑,在IAU 公布的有名称的撞击坑及其描述形貌特征指标的基础上,建立了描述全月球撞击坑形貌特征的指标体系并获得了所有撞击坑指标的属性值。针对现阶段尚无一套完整的全月球撞击坑数据库的现状,采用面向对象的Geodatabase数据模型组织全月球撞击坑数据,构建了包含位置、大小、形状、坡度、方向、中央峰、辐射纹等7 个大类52 个小类指标的全关系型数据库,其可对撞击坑空间数据和属性数据进行一体化管理,实现了对撞击坑数据的存储、检索、处理和应用,为其他月球科学研究基于数据库进行数据挖掘和应用提供了海量基础数据,为后续月球其他资源数据库的构建提供借鉴。今后将进一步完善更新维护全月球数据库的工作。 相似文献
4.
《地理与地理信息科学》2017,(4)
月表撞击坑的精准自动提取是月球地貌特征研究的基础。该文基于坑缘部位相对突起的形态特征,利用月球勘测轨道器相机(LROC)提供的100m分辨率数字高程模型(DEM)数据,采用邻域高程比对算法对撞击坑进行自动识别。该方法首先确定坑缘轮廓位置,继而采用数学形态学方法进行噪声过滤、细化连接和自动识别坑缘处栅格。在月海和月陆地区提取实验结果表明:该方法对简单型撞击坑和复杂型撞击坑的提取率在64.7%以上,对边缘退化型撞击坑的提取率为63.6%;对比目视解译结果,提取准确率在74.5%以上;所提取撞击坑与自然形态吻合较好,偏移距离在400m以内的坑缘栅格数占81.5%以上。 相似文献
5.
撞击坑是月表最主要的地貌形态,相关研究多采用撞击坑深度和坑口直径比值作为月球形貌研究依据。事实上撞击坑的形状不是典型的圆锥,而是上大下小的截锥形。依据"嫦娥一号"影像图和全月球数字高程模型数据,获取了1000个撞击坑坑唇等效半径r1、坑底等效半径r2,撞击坑的深度h,进而对r1、r2、h三个参数进行了统计分析和聚类分析。结果表明:(1)撞击坑数目与r1和r2的分形维数分别为D1=1.88、D2=1.51,都大于地球撞击坑的分维数1.16,表明月表撞击坑复杂度受到外界的影响较地球低,且坑唇的复杂度比坑底高;(2)r1-r2之间具有很好的线性正相关关系,聚类结果将其分为三类,决定系数分别为R12=0.685、R22=0.886、R32=0.974;(3)对r1-r2-h三者进行线性拟合,决定系数R2=0.968,表明三者之间同样具有显著线性关系,且月表撞击坑的形成过程以及形成之后都处于相似的动力环境下。 相似文献
6.
厚度对月壤微波辐射亮温的影响 总被引：1，自引：0，他引：1
基于嫦娥系列卫星微波辐射计数据的月壤厚度反演是中国月球科学研究的重要目标之一。基于辐射传输方程,数值模拟了不同频率、（FeO+TiO2）含量和表面温度条件下厚度对月壤微波辐射亮温的影响;基于嫦娥二号卫星微波辐射计（Chang’E Lunar Microwave Sounder,CELMS）数据,结合Apollo 计划获取的月壤厚度资料及其他月壤厚度资料,系统分析了厚度对CELMS观测数据的影响。结果表明：频率、（FeO+TiO2）含量、表面温度对亮温的影响远大于厚度对亮温的影响,是基于CELMS数据进行月壤厚度反演的重要影响因素;低频、低（FeO+TiO2）含量、低温条件下,厚度对CELMS数据的影响最大;利用3 GHz、凌晨时刻的CELMS数据进行月陆地区月壤厚度反演可行。研究结果对基于嫦娥系列卫星CELMS数据的月壤厚度反演具有重要参考意义。 相似文献
7.
月球地貌是月球表面发生的地质和地貌过程的结果,月球地貌单元的划分和等级分类体系的构建是月球地貌学研究的基础,也是月球地貌图制图的基础和关键科学问题。地貌学是研究形态和成因的科学,高程和起伏度是最基本的地貌指标。本文基于LOLA（Lunar Orbiter Laser Altimeter） DEM数据以及LOLA和SELENE TC（Terrain Camera）融合的DEM数据（SLDEM2015,文中简称SLDEM）,利用均值变点法确定月表起伏度计算的最佳窗口,并以起伏度100 m、200 m、300 m、700 m、1500 m及2500 m为阈值将月球表面分为微起伏平原（< 100 m）、微起伏台地[100 m, 200 m）、微小起伏丘陵[200 m, 300 m）、小起伏山地[300 m, 700 m）、中起伏山地[700 m, 1500 m）、大起伏山地[1500 m, 2500 m）及极大起伏山地（≥ 2500 m）地貌7个类型。划分结果显示：微起伏平原主要分布在月海平原区域、部分有玄武岩充填的撞击盆地的盆底区域以及撞击坑坑底区域;微起伏台地主要分布在月海和月陆区域的交界区域;微小起伏丘陵主要分布在月溪和皱脊等构造单元区域;小起伏山地主要分布在撞击坑中央峰及坑底断裂区域;中起伏山地主要分布在撞击坑坑底和坑壁过渡区域、撞击坑坑壁和坑缘过渡区域、撞击盆地盆底与盆壁过渡区域以及盆壁与盆缘过渡区域;大起伏和极大起伏山地主要分布在撞击坑坑壁区域及撞击盆地盆壁区域。本文确定的月表起伏度分级标准可以对月表数字地貌分类体系的构建和月球地貌图集的编研提供定量标准和重要参考。 相似文献
9.
选取长白山地区为研究区,利用2009年14期环境一号卫星CCD数据,运用非监督分类方法提取了长白山地区2009年植被覆盖信息,对提取结果进行了精度验证并与单期TM数据提取结果进行了对比分析.研究表明,多时相环境一号卫星CCD数据能够快速准确地提取植被覆盖信息,总体精度为84.67％,Kappa系数为0.82,总体精度和单个植被类型精度均高于单时相TM数据;多时相环境一号卫星CCD数据能区分出常绿针叶林和落叶针叶林,且分类结果景观破碎度较低;长白山地区以针阔混交林为主,占区域总面积的40.84％,植被呈明显的垂直地带性分布. 相似文献
10.
本文分别利用光学立体和In SAR技术生成了东南极Grove山地区15 m分辨率的ASTER DEM和20 m分辨率的In SAR DEM。在利用ASTER立体像对生成DEM的过程中引入ICESat测高数据作为高程控制以减少错误匹配,提高DEM垂直精度;而在利用ERS tandem数据生成DEM后,选取ICESat测高数据对In SAR DEM进行倾斜面纠正,以消除基线不精确估计等带来的影响。通过与未作控制的ICESat测高数据进行比较,评价了两种DEM的精度并对误差进行了分析。同时,比较了两种DEM的差异,并分析了造成这些差异的原因,探讨了两种技术生成南极冰盖DEM的优势和不足。最后结合两DEM的优势,融合生成了Grove山地区高精度的DEM。 相似文献
11.
月表形貌特征研究进展及趋势分析 总被引：4，自引：0，他引：4
在月球探测及科学研究过程中,对月表形貌特征的认识和分析是月球探测计划的关键任务之一,有助于理解和揭示月球的形态特征及空间分异规律,对于分析月球岩石构造、估算月表年龄、反演月壤厚度、恢复月球的起源和演化历史等都具有重要意义。从月表形貌特征的塑造及表达、宏观特征的分析与定量刻画、月表撞击坑的识别与分类及空间分异特征等几方面进行了归纳和分析,提出了未来月表形貌的研究方向,包括全月球形貌特征的多级分区划分、撞击坑类型的划分、全月球撞击坑空间分异特征及规律的研究、基于撞击坑空间分布探讨月球演化、基于形貌特征的比较行星学研究等。 相似文献
12.
月球表面粗糙度是揭示月表地貌形态空间分异特征的重要指标,并在一定程度上映射月表地貌的形成与演化机理。运用基于中国“嫦娥一号”卫星获取的DEM数据,提取月球雨海地区的月表粗糙度,并在月球正面地质图数据辅助下,分析月表粗糙度分布特征及其与地质单元岩性以及地质年龄的关系。结果显示:月球雨海地区的粗糙度与地质单元岩性存在较强相关关系,且随着地质年龄的增长,玄武岩单元的粗糙度呈现增大的趋势。此外,在小于7 km的尺度范围内,雨海地区受持续撞击作用的影响,Hurst指数分布在0.7~0.9之间,地形较为粗糙;在更大尺度上,由于受到火山熔岩流充填机制的控制,Hurst指数不断减小,地形不断趋于平缓。 相似文献
13.
Elastic finite element models are applied to investigate the effects of topography and medium heterogeneities on the surface deformation and the gravity field produced by volcanic pressure sources. Changes in the gravity field cannot be interpreted only in terms of gain of mass disregarding the ground deformation of the rocks surrounding the source. Contributions to gravity changes depend also on surface and subsurface mass redistribution driven by dilation of the volcanic source. Both ground deformation and gravity changes were firstly evaluated by solving a coupled axisymmetric problem to estimate the effects of topography and medium heterogeneities. Numerical results show significant discrepancies in the ground deformation and gravity field compared to those predicted by analytical solutions, which disregard topography, elastic heterogeneities and density subsurface structures. With this in mind, we reviewed the expected gravity changes accompanying the 1993–1997 inflation phase on Mt Etna by setting up a fully 3-D finite element model in which we used the real topography, to include the geometry, and seismic tomography, to infer the crustal heterogeneities. The inflation phase was clearly detected by different geodetic techniques (EDM, GPS, SAR and levelling data) that showed a uniform expansion of the overall volcano edifice. When the gravity data are integrated with ground deformation data and a coupled FEM modelling was solved, a mass intrusion could have occurred at depth to justify both ground deformation and gravity observations. 相似文献
14.
月海是月球表面的主要地理单元。对月海地貌特征的研究能够认识月表起伏及其动力学成因。依据CE-1 影像图和全月球数字高程模型数据,提取了南北半球不同纬度地区、不同填充岩性的典型月海范围,运用盒维数法、立方体覆盖法和多重分形q-Dq语言对月海边界及其地形表面的地貌特征进行了线和面的描述和研究。结果表明：① 分形方法可以有效地描述月球地貌的复杂程度。月海边界的分维值介于1.065~1.100 之间,平均值为1.086,标准差为0.014,在双对数坐标下5 个月海区边界复杂度拟合的直线都近似平行。② 月海地形表面的分维值介于2.704~2.852 之间,5 个月海地形表面的分维值标准差为0.051,ln δ -lnN（δ）图也近似平行,但截距的离散程度相较于月海边界的高。③ 月海地貌多重分析的q-Dq曲线图总体呈现非递增趋势,Dq值在q=-10 和q=0 时基本达到饱和,但差异较小。④ 从线、面单分形以及多重分形可见,5 个月海均具有分形特征,但彼此之间差异较小。其动力学意义在于它们在形成之后,内动力作用基本停止或很小,与分形特征基本一致;而外力主要由陨石撞击作用少量地改变着月表的面貌,导致在分形特征上表现出差异性。 相似文献
15.
Lunar landforms are the results of geological and geomorphic processes on the lunar surface. It is very important to identify the types of lunar landforms. Geomorphology is the scientific study of the origin and evolution of morphological landforms on planetary surfaces. Elevation and relief amplitude are the most commonly used geomorphic indices in geomorphological classification studies. Previous studies have determined the elevation classification criteria of the lunar surface. In this paper, we focus on the classification criteria of the topographic relief amplitude of the lunar surface. To estimate the optimal window for calculating the relief amplitude of the lunar surface, we use the mean change-point method based on LOLA (Lunar Orbiter Laser Altimeter) Digital Elevation Model (DEM) data and SLDEM2015 DEM data combining observations from LOLA and SELenological and Engineering Explorer Terrain Camera (SELENE TC). The classification criterion of the lunar surface relief amplitude is then determined according to the statistical analysis of basic lunar landforms. Taking the topographic relief amplitudes of 100 m, 200 m, 300 m, 700 m, 1500 m and 2500 m as thresholds, the lunar surface is divided into seven geomorphic types, including minor microrelief plains (< 100 m), minor microrelief platforms [100 m, 200 m), microrelief landforms [200 m, 300 m), small relief landforms [300 m, 700 m), medium relief landforms [700 m, 1500 m), large relief landforms [1500 m, 2500 m) and extremely large relief landforms (≥ 2500 m). The minor microrelief plains are mainly distributed in the maria and the basalt filled floors of craters and basins, while the minor microrelief platforms are mainly in the transition regions between the maria and highlands. The microrelief landforms are mainly located in regions with relatively high topography, such as wrinkle ridges and sinuous rilles in the mare. The small relief landforms are mainly scattered in the central peak and floor fractures of craters. The medium relief landforms are mainly distributed in the transition regions between crater floors and crater walls, between crater walls and crater rims, between basin floors and basin walls, and between basin walls and basin rims. Large and extremely large relief landforms are mainly found along crater walls and basin walls. The classification criteria determination for assessing lunar surface relief amplitude described in this paper can provide important references for the construction of digital lunar surface geomorphology classification schemes. 相似文献
16.
Alessandra Borghi Daniela Carrion Giovanna Sona 《Geophysical Journal International》2007,171(2):539-549
An up to date determination of a high-resolution geoid requires the use of best available databases concerning digital terrain model (DTM), bathymetry, global geopotential model and gravity field. The occasion to revisit methods to validate and merge different data sets has been created by a new project for the determination of a new European Geoid.
Since the computation of the latest European geoid and quasi-geoid model (EGG97), significant new or improved data sets have become available, such as new global geopotential models from CHAMP and GRACE missions, new national and global DTMs and new or upgraded gravity data sets.
In the context of the new European Gravity and Geoid Project (EGGP), within the IAG Commission 2, some data validation tests have been performed in the Italian zone.
In the area 19°× 17° wide, covering Italy, three kinds of tests have been performed: comparison among different DTMs in order to choose the best one to be used; comparisons in terms of geoid computation in some coastal areas, to evaluate bathymetry effects, and the validation of the EIGEN-CG01C and EIGEN-CG03C new global models up to degree and order 360.
These preliminary tests lead to the choice of SRTM DTM (integrated in no-data holes), with an added bathymetry derived by the Italian 1:25 000 official cartography near the coasts and the NOAA bathymetry in high seas. The validation of the new global models and the comparison with EGM96 model show that, in terms of geoid computation, the EGM96 yields better results. Moreover, the validation of new available land gravity data and the cross-validation of two sets of gravity data on sea have been completed. 相似文献
Since the computation of the latest European geoid and quasi-geoid model (EGG97), significant new or improved data sets have become available, such as new global geopotential models from CHAMP and GRACE missions, new national and global DTMs and new or upgraded gravity data sets.
In the context of the new European Gravity and Geoid Project (EGGP), within the IAG Commission 2, some data validation tests have been performed in the Italian zone.
In the area 19°× 17° wide, covering Italy, three kinds of tests have been performed: comparison among different DTMs in order to choose the best one to be used; comparisons in terms of geoid computation in some coastal areas, to evaluate bathymetry effects, and the validation of the EIGEN-CG01C and EIGEN-CG03C new global models up to degree and order 360.
These preliminary tests lead to the choice of SRTM DTM (integrated in no-data holes), with an added bathymetry derived by the Italian 1:25 000 official cartography near the coasts and the NOAA bathymetry in high seas. The validation of the new global models and the comparison with EGM96 model show that, in terms of geoid computation, the EGM96 yields better results. Moreover, the validation of new available land gravity data and the cross-validation of two sets of gravity data on sea have been completed. 相似文献
17.
数字地形模型在濒危动物生境研究中的应用 总被引：13，自引：0，他引：13
本文建立了卧龙自然保护区２０００ｋｍ２范围的数字地形模型,并将其应用在濒危珍稀动物大熊猫的生境研究上。通过计算机叠加大熊猫可分布的高度、坡度及竹子分布区域,获得了大熊猫在卧龙自然保护区内的潜在生境区,其比实际的熊猫分布范围大出近一倍,文章还对潜在生境的适宜性进行了划分。 相似文献