首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Upper Carboniferous Coal Measures strata have been interpreted traditionally in terms of cyclothems bounded by marine flooding surfaces (marine bands) and coal seams. Correlation of such cyclothems in an extensive grid of closely spaced coal exploration boreholes provides a robust stratigraphic framework in which to study the Lower Coal Measures (Namurian C–Westphalian A) of the Ruhr district, north-west Germany. Three distinct types of cyclothem are recognized, based on their bounding surfaces and internal facies architecture. (1) Type 1 cyclothems are bounded by marine bands. Each cyclothem comprises a thick (30–80 m), regionally extensive, coarsening-upward delta front succession of interbedded shales, siltstones and sandstones, which may be deeply incised by a major fluvial sandstone complex. The delta front succession is capped by a thin (<1 m), regionally extensive coal seam and an overlying marine band defining the top of the cyclothem. (2) Type 2 cyclothems are bounded by thick (≈1 m), regionally extensive coal seams with few splits. The basal part of a typical cyclothem comprises a thick (15–50 m), widespread, coarsening-upward delta front or lake infill succession consisting of interbedded shales, siltstones and sandstones. Networks of major (>5 km wide, 20–40 m thick), steep-sided, multistorey fluvial sandstone complexes erode deeply into and, in some cases, through these successions and are overlain by the coal seam defining the cyclothem top. (3) Type 3 cyclothems are bounded by regionally extensive coal seam groups, characterized by numerous seam splits on a local (0·1–10 km) scale. Intervening strata vary in thickness (15–60 m) and are characterized by strong local facies variability. Root-penetrated, aggradational floodplain heteroliths pass laterally into single-storey fluvial channel-fill sandstones and coarsening-upward, shallow lake infill successions of interbedded shales, siltstones and sandstones over distances of several hundred metres to a few kilometres. Narrow (<2 km) but thick (20–50 m) multistorey fluvial sandstone complexes are rare, but occur in a few type 3 cyclothems. Several cyclothems are observed to change character from type 1 to type 2 and from type 2 to type 3 up the regional palaeoslope. Consequently, we envisage a model in which each cyclothem type represents a different palaeogeographic belt within the same, idealized delta system, subject to the same allogenic and autogenic controls on facies architecture. Type 1 cyclothems are dominated by deltaic shorelines deposited during a falling stage and lowstand of sea level. Type 2 cyclothems represent the coeval lower delta plain, which was deeply eroded by incised valleys that fed the falling stage and lowstand deltas. Type 3 cyclothems comprise mainly upper delta plain deposits in which the allogenic sea-level control was secondary to autogenic controls on facies architecture. The marine bands, widespread coals and coal seam groups that bound these three cyclothem types record abandonment of the delta system during periods of rapid sea-level rise. The model suggests that the extant cyclothem paradigm does not adequately describe the detailed facies architecture of Lower Coal Measures strata. Instead, these architectures may be better understood within a high-resolution stratigraphic framework incorporating sequence stratigraphic key surfaces, integrated with depositional models derived from analogous Pleistocene–Holocene fluvio-deltaic strata.  相似文献   

2.
The Fall River Formation is a 45 m thick layer of fluvial-dominated valley-fills and shore-zone strata deposited on the stable cratonic margin of the Cretaceous Western Interior Seaway. Fall River deposits in Red Canyon, in the south-west corner of South Dakota (USA), expose a cross-section of a 3.5 km wide valley-fill sandstone and laterally adjacent marine deposits. The marine deposits comprise three 10 m thick upward-shoaling sequences; each composed of multiple metres-thick upward-coarsening successions. The lower two of these sequences are laterally cut by the valley-fill sandstone, and are capped by metres-thick muddy palaeosols. The upper sequence spans the top of the valley-fill sandstone, and is overlain by the Skull Creek Shale. The 30 m thick valley sandstone is partitioned into four distinct fills by major erosion surfaces, and each of these fills contain many metres-thick channel-form bodies. Deposits in the lower parts of these fills are sheet-like, top-truncated channel bodies, whereas deposits in the upper parts of fills are upward-concave, laterally amalgamated channel bodies, more completely preserved heterolithic channel bodies, or wave-deposited sheets. Each valley-fill basal erosion surface records an episode of valley incision and relative sea-level fall, and the gradual progression from fluvial to more estuarine deposits upwards within each fill records relative sea-level rise. All fills are dominantly channel deposits and are capped by marine flooding surfaces. The dominance of channel deposits, the gradual change to more estuarine facies in the upper parts of fills, and the location of flooding surfaces at valley-fill tops all suggest that sediment supply initially kept pace with relative sea-level rise and valleys filled during late marine lowstand and transgression, not during subsequent highstands. Recently proposed facies models have focused on variations in the relative strength of tide, wave and river currents as controls on valley-fill deposits. However, relative rates of sediment supply and basin accommodation change, and the shift in this ratio along the depositional profile during multiple-scale cycles in relative sea-level, are equally important controls on the style of valley-fill deposits.  相似文献   

3.
The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.  相似文献   

4.
A detailed record of late Quaternary sea-level oscillations is preserved within the upper 45 m of deposits along an eight km transect across Croatan Sound, a drowned tributary of the Roanoke/Albemarle drainage system, northeastern North Carolina. Drill-hole and seismic data reveal nine relatively complete sequences filling an antecedent valley comprised of discontinuous middle and early Pleistocene deposits. On interfluves, lithologically similar marine deposits of different sequences occur stacked in vertical succession and separated by ravinement surfaces. Within the paleo-drainage, marine deposits are separated by fluvial and/or estuarine sediments deposited during periods of lowered sea level. Foraminiferal and molluscan fossil assemblages indicate that marine facies were deposited in a shallow-marine embayment with open connection to shelf waters. Each sequence modifies or truncates portions of the preceding sequence or sequences. Sequence boundaries are the product of a combination of fluvial, estuarine, and marine erosional processes. Stratigraphic and age analyses constrain the ages of sequences to late Marine Isotope Stage (MIS) 6 and younger (∼ 140 ka to present), indicating multiple sea-level oscillations during this interval. Elevations of highstand deposits associated with late MIS 5 and MIS 3 imply that sea level was either similar to present during those times, or that the region may have been influenced by glacio-isostatic uplift and subsidence.  相似文献   

5.
The Lower Tagus Valley in Portugal contains a well-developed valley-fill succession covering the complete Late Pleistocene and Holocene periods. As large-scale stratigraphic and chronologic frameworks of the Lower Tagus Valley are not yet available, this paper describes facies, facies distribution, and sedimentary architecture of the late Quaternary valley fill. Twenty four radiocarbon ages provide a detailed chronological framework. Local factors affected the nature and architecture of the incised valley-fill succession. The valley is confined by pre-Holocene deposits and is connected with a narrow continental shelf. This configuration facilitated deep incision, which prevented large-scale marine flooding and erosion. Consequently a thick lowstand systems tract has been preserved. The unusually thick lowstand systems tract was probably formed in a previously (30,000–20,000 cal BP) incised narrow valley, when relative sea-level fall was maximal. The lowstand deposits were preserved due to subsequent rapid early Holocene relative sea-level rise and transgression, when tidal and marine environments migrated inland (transgressive systems tract). A constant sea level in the middle to late Holocene, and continuous fluvial sediment supply, caused rapid bayhead delta progradation (highstand systems tract). This study shows that the late Quaternary evolution of the Lower Tagus Valley is determined by a narrow continental shelf and deep glacial incision, rapid post-glacial relative sea-level rise, a wave-protected setting, and large fluvial sediment supply.  相似文献   

6.
Tectonic activity, sea-level changes, and the climate controlled sedimentation in Late Paleozoic basins of western Argentina. The role of each factor is investigated from the geologic record of the Río Blanco and Paganzo basins using three hierarchical orders of stratigraphic bounding surfaces. First-order surfaces correspond to regional unconformities, second-order ones to local unconformities with a lesser regional extent, and third-order surfaces represent locally extended sedimentary truncation. Using this methodology, the Carboniferous–Permian record of the Paganzo and Río Blanco basins may be divided into two megasequences, four sequences, and 12 stratigraphic sections. Megasequences are bounded by regional unconformities that result from tectonic events important enough to cause regional paleogeographic changes. Sequences are limited by minor regional extension surfaces related to local tectonic movements or significant sea-level falls. Finally, stratigraphic sections correspond to extended sedimentary truncations produced by transgressive events or major climatic changes. Sequence I is mainly composed of marine deposits divided into basal infill of the basin (Section 1) and Tournaisian–Visean transgressive deposits (Section 2). Sequence II is bounded by a sharp erosional surface and begins with coarse conglomerates (Section 3), followed by fluvial and shallow marine sedimentary rocks (Section 4) that pass upward into shales and diamictites (Section 5). The base of Sequence III is marked by an extended unconformity covered by Early Pennsylvanian glacial sedimentary rocks (Section 6) that represent the most important glacial event along the western margin of Gondwana. Postglacial deposits (Section 7) occur in the two basins and comprise both glaciolacustrine (eastern region) and transgressive marine (central and western regions) deposits. By the Moscovian–Kasimovian, fluvial sandstones and conglomerates were deposited in most of the Paganzo Basin (Section 8), while localized volcanic activity took place in the Río Blanco Basin. Near the end of the Carboniferous, an important transgression is recorded in the major part of the Río Blanco Basin (Section 9), reaching the westernmost portion area of the Paganzo Basin. Finally, Sequence IV shows important differences between the Paganzo and Río Blanco basins; fluvial red beds (Section 10), eolian sandstones (Section 11), and low-energy fluvial deposits (Section 12) prevailed in the Paganzo Basin whereas volcaniclastic sedimentation and volcanism dominated in the Río Blanco Basin. Thus, tectonic events, sea-level changes and climate exerted a strong and complex control on the evolution of the Río Blanco and Paganzo basins. The interaction of these allocyclic controls produced not only characteristic facies association patterns but also different kinds of stratigraphic bounding surfaces.  相似文献   

7.
Tectonic activity, sea-level changes, and the climate controlled sedimentation in Late Paleozoic basins of western Argentina. The role of each factor is investigated from the geologic record of the Río Blanco and Paganzo basins using three hierarchical orders of stratigraphic bounding surfaces. First-order surfaces correspond to regional unconformities, second-order ones to local unconformities with a lesser regional extent, and third-order surfaces represent locally extended sedimentary truncation. Using this methodology, the Carboniferous–Permian record of the Paganzo and Río Blanco basins may be divided into two megasequences, four sequences, and 12 stratigraphic sections. Megasequences are bounded by regional unconformities that result from tectonic events important enough to cause regional paleogeographic changes. Sequences are limited by minor regional extension surfaces related to local tectonic movements or significant sea-level falls. Finally, stratigraphic sections correspond to extended sedimentary truncations produced by transgressive events or major climatic changes. Sequence I is mainly composed of marine deposits divided into basal infill of the basin (Section 1) and Tournaisian–Visean transgressive deposits (Section 2). Sequence II is bounded by a sharp erosional surface and begins with coarse conglomerates (Section 3), followed by fluvial and shallow marine sedimentary rocks (Section 4) that pass upward into shales and diamictites (Section 5). The base of Sequence III is marked by an extended unconformity covered by Early Pennsylvanian glacial sedimentary rocks (Section 6) that represent the most important glacial event along the western margin of Gondwana. Postglacial deposits (Section 7) occur in the two basins and comprise both glaciolacustrine (eastern region) and transgressive marine (central and western regions) deposits. By the Moscovian–Kasimovian, fluvial sandstones and conglomerates were deposited in most of the Paganzo Basin (Section 8), while localized volcanic activity took place in the Río Blanco Basin. Near the end of the Carboniferous, an important transgression is recorded in the major part of the Río Blanco Basin (Section 9), reaching the westernmost portion area of the Paganzo Basin. Finally, Sequence IV shows important differences between the Paganzo and Río Blanco basins; fluvial red beds (Section 10), eolian sandstones (Section 11), and low-energy fluvial deposits (Section 12) prevailed in the Paganzo Basin whereas volcaniclastic sedimentation and volcanism dominated in the Río Blanco Basin. Thus, tectonic events, sea-level changes and climate exerted a strong and complex control on the evolution of the Río Blanco and Paganzo basins. The interaction of these allocyclic controls produced not only characteristic facies association patterns but also different kinds of stratigraphic bounding surfaces.  相似文献   

8.
This study focuses on the lowstand and early transgressive systems tracts of a basin-fill sequence of lower Pliocene nearshore deposits in the Val d'Orcia Basin of the Northern Apennines, Italy. The basin at that time was a semi-enclosed marine embayment, and, in the study area, its margin was subject to highly variable subsidence along the depositional strike, attributed to a decrease in tectonic displacement. The nearshore succession in the more rapidly-subsiding segment of the basin is around 20 m thick, comprising three storeys of laterally-stacked Gilbert-type delta lobes overlain by a shoal-water delta, whereas the nearshore succession in the adjacent, more slowly-subsiding segment, is up to 9 m thick. This succession is characterised by alternation of shoreface and offshore deposits, moderately wave-worked and covered by shoal-water deltaic facies.These coeval nearshore successions consist of several transgressive-regressive cyclothems. The development and lateral variation of the cyclothems was controlled by the local subsidence rate and coastal topographic gradient. Some of the cyclothems are considered to be higher-order sequences and others to be parasequences, with the former passing laterally into the latter in the area where the sea-level fall was countered by fast local subsidence. Some of the bounding surfaces are of limited lateral extent, with two parasequences passing laterally into a single one.Coastal topography controlled particularly the thickness of transgressive deposits. In the low-gradient setting of a delta plain, the relative sea-level rises caused major landward shifts of the shoreline and reduced fluvial sediment supply, with the formation of a transgressive lag in sediment-starved conditions. In the high-gradient coastal setting of the non-deltaic zone, the shoreline shift was minimal and had relatively little impact on local sediment supply, which promoted an accretionary transgression.At the end of the lowstand stage, the rate of sediment accumulation in the non-deltaic nearshore zone was lower, allowing the onset of subsequent transgression to be recorded considerably earlier than in the deltaic nearshore zone. This diachroneity suggests that facies criteria alone may not necessarily be a reliable basis for the recognition of systems tract boundaries.  相似文献   

9.
吉南地区新元古代地层沉积模式   总被引：2，自引：1，他引：1  
吉南地区新元古代地层系古华北板块东北部第一套具有典型意义的盖层沉积,由四个不同类型的不整合面所限。可划分为三个沉积序列（层序）。其沉积相序分别为：河流相（属早期深切河谷沉积）—陆缘斜坡相—滨滩相（席状砂）相结合;近岸砂坝—坝后泻湖—滨滩相组合;碳酸盐台地（开阔缓坡）—台缘生物（藻）礁—礁后盆地相组合,进而建立了其沉积模式。  相似文献   

10.
The passive margin Texas Gulf of Mexico Coastal Plain consists of coalescing late Pleistocene to Holocene alluvial–deltaic plains constructed by a series of medium to large fluvial systems. Alluvial–deltaic plains consist of the Pleistocene Beaumont Formation, and post-Beaumont coastal plain incised valleys. A variety of mapping, outcrop, core, and geochronological data from the extrabasinal Colorado River and the basin-fringe Trinity River show that Beaumont and post-Beaumont strata consist of a series of coastal plain incised valley fills that represent 100 kyr climatic and glacio-eustatic cycles.

Valley fills contain a complex alluvial architecture. Falling stage to lowstand systems tracts consist of multiple laterally amalgamated sandy channelbelts that reflect deposition within a valley that was incised below highstand alluvial plains, and extended across a subaerially-exposed shelf. The lower boundary to falling stage and lowstand units comprises a composite valley fill unconformity that is time-transgressive in both cross- and down-valley directions. Coastal plain incised valleys began to fill with transgression and highstand, and landward translation of the shoreline: paleosols that define the top of falling stage and lowstand channelbelts were progressively onlapped and buried by heterolithic sandy channelbelt, sandy and silty crevasse channel and splay, and muddy floodbasin strata. Transgressive to highstand facies-scale architecture reflects changes through time in dominant styles of avulsion, and follows a predictable succession through different stages of valley filling. Complete valley filling promoted avulsion and the large-scale relocation of valley axes before the next sea-level fall, such that successive 100 kyr valley fills show a distributary pattern.

Basic elements within coastal plain valleys can be correlated with the record offshore, where cross-shelf valleys have been described from seismic data. Falling stage to lowstand channelbelts within coastal plain valleys were feeder systems for shelf-phase and shelf-margin deltas, respectively, and demonstrate that falling stage fluvial deposits are important valley fill components. Signatures of both upstream climate change vs. downstream sea-level controls are therefore interpreted to be present within incised valley fills. Signatures of climate change consist of the downstream continuity of major stratigraphic units and component facies, which extends from the mixed bedrock–alluvial valley of the eroding continental interior to the distal reaches, wherever that may be at the time. This continuity suggests the development of stratigraphic units and facies is strongly coupled to upstream controls on sediment supply and climate conditions within hinterland source regions. Signatures of sea-level change are critical as well: sea-level fall below the elevation of highstand depositional shoreline breaks results in channel incision and extension across the newly emergent shelf, which in turn results in partitioning of the 100 kyr coastal plain valleys. Moreover, deposits and key surfaces can be traced from continental interiors to the coastal plain, but there are downstream changes in geometric relations that correspond to the transition between the mixed bedrock–alluvial valley and the coastal plain incised valley. Channel incision and extension during sea-level fall and lowstand, with channel shortening and delta backstepping during transgression, controls the architecture of coastal plain and cross-shelf incised valley fills.  相似文献   


11.
Sweet 《Sedimentology》1999,46(1):171-187
The Permian Upper Rotliegend Group in offshore UK Quadrants 42, 43, 47 and 48 comprises a sequence of mixed aeolian/fluvial/playa deposits. These deposits are up to 300 m thick and contain a record of the interaction between desert fluvial systems and adjacent aeolian and playa environments. The relative dominance of water vs. wind transport and deposition in this stratigraphic package was a function of fluctuations in the discharge of ephemeral fluvial systems and changes in water table/playa level driven by a combination of climatic change and syndepositional tectonics. The Rotliegend sedimentary record is punctuated by numerous surfaces recording erosion by wind and water. The origin of these surfaces is mostly climatic, with periods of increased runoff resulting in fluvial incision, especially near active faults. During periods of reduced runoff, wind erosion of fluvial deposits occurred, with fluvially derived sand being reworked into expanding aeolian dune fields. Wind erosion also occurred as a rising water table isolated dunes from their sediment supply, resulting in deflation of dunes down to the water table. These surfaces formed in a basin that was subsiding. Thus, even in a background of overall increasing accommodation space, climatically driven falls in the water table allowed for periods of erosion. The occurrence of significant erosion, especially near syndepositional fault zones, resulted in a sedimentary record that shows pronounced lateral as well as vertical facies variations.  相似文献   

12.
Cyclothemic sedimentary rocks of the Plio-Pleistocene Petane Group outcrop extensively in the Tangoio block of central Hawke's Bay, New Zealand. They are products of inner to mid-shelf sedimentation and were deposited during glacio-eustatic sea level fluctuations along the western margin of a shallow, pericontinental seaway located in a forearc setting. The succession consists of five laterally continuous cyclothems, each containing a fine grained interval of silt and a coarse grained interval of siliciclastic sand ± gravel or limestone. Five sedimentary facies assemblages comprising 20 separate facies have been recognized. Coarse grained intervals of cyclothems were deposited mostly during relative sea level lowstands and contain up to four facies assemblages: (1) a non-marine assemblage (with three component facies, representing braided river and overbank environments); (2) an estuarine assemblage (with three component facies, representing tidal flat and mud-dominated estuarine environments); (3) a siliciclastic shoreline assemblage (with six component facies, representing greywacke pebble beach, shoreface and inner shelf environments); and (4) a carbonate shelf assemblage (with four component facies, representing tide-dominated, inshore and shallow marine environments). Fine grained intervals of cyclothems were deposited during sea level highstands when the Tangoio area was generally experiencing mid-shelf sedimentation. This produced an offshore assemblage consisting of four component facies. The distribution of facies assemblages during relative sea level lowstands was dependent upon proximity to the shoreline, the type and rate of sediment supply to the basin, and shelf hydrodynamics. Carbonate shelf facies dominate coarse grained intervals in Cyclothems 3–5, but siliciclastic shoreline and non-marine facies dominate in Cyclothems 1 and 2. The abrupt change from siliciclastic to carbonate sedimentation during relative sea level lowstand deposition is thought to have been induced by rapidly falling interglacial to glacial sea level accentuated by regional tectonic shoaling. This caused most of the terrigenous sediment supply to bypass the Tangoio area. Consequently, carbonate sediment accumulated in inshore and shallow marine settings. Facies assemblages rarely show lateral interdigitation, but are vertically stratified over the entire Tangoio block. Facies successions in each cyclothem preserve a record of relative sea level change during deposition of the Petane Group and are consistent with a Plio-Pleistocene sea level change in eastern New Zealand of c. 75–150 m, i.e. approximately the magnitude suggested for Late Quaternary glacio-eustatic sea level changes.  相似文献   

13.
The Dakota Formation in southern Utah (Kaiparowits Plateau region) is a succession of fluvial through shallow-marine facies formed during the initial phase of filling of the Cretaceous foreland basin of the Sevier orogen. It records a number of relative sea-level fluctuations of different frequency and magnitude, controlled by both tectonic and eustatic processes during the Early to Late Cenomanian. The Dakota Formation is divided into eight units separated by regionally correlatable surfaces that formed in response to relative sea-level fluctuations. Units 1–6B represent, from bottom to top, valley-filling deposits of braided streams (unit 1), alluvial plain with anastomosed to meandering streams (2), tide-influenced fluvial and tide-dominated estuarine systems (3A and 3B), offshore to wave-dominated shoreface (4, 5 and 6A) and an estuarine incised valley fill (6A and 6B). The onset of flexural subsidence and deposition in the foredeep was preceded by eastward tilting of the basement strata, probably caused by forebulge migration during the Early Cretaceous, which resulted in the incision of a westward-deepening predepositional relief. The basal fluvial deposits of the Dakota Formation, filling the relief, reflect the onset of flexural subsidence and, possibly, a eustatic sea-level rise. Throughout the deposition of the Dakota Formation, flexure controlled the long-term, regional subsidence rate. Locally, reactivation of basement faults caused additional subsidence or minor uplift. Owing to a generally low subsidence rate, differential compaction locally influenced the degree of preservation of the Dakota units. Eustasy is believed to have been the main control on the high-frequency relative sea-level changes recorded in the Dakota. All surfaces that separate individual Dakota units are flooding surfaces, most of which are superimposed on sequence boundaries. Therefore, with the exception of unit 6B and, possibly, 3B, most of the Dakota units are interpreted as depositional sequences. Fluvial strata of units 1 and 2 are interpreted as low-frequency sequences; the coal zones at the base and within unit 2 may represent a response to higher frequency flooding events. Units 3A to 6B are interpreted as having formed in response to high-frequency relative sea-level fluctuations. Shallow-marine units 4, 5 and 6A, interpreted as parasequences by earlier authors, can be divided into facies-based systems tracts and show signs of subaerial exposure at their boundaries, which allows interpretation as high-frequency sequences. In general, the Dakota units are good examples of high-frequency sequences that can be misinterpreted as parasequences, especially in distal facies or in places where signs of subaerial erosion are missing or have been removed by subsequent transgressive erosion. Both low- and high-frequency sequences represented by the Dakota units are stacked in an overall retrogradational pattern, which reflects a long-term relative sea-level rise, punctuated by brief periods of relative sea-level fall. There is a relatively major fall near the end of the M. mosbyense Zone, whereas the base of the Tropic shale is characterized by a major flooding event at the base of the S. gracile Zone. A similar record of Cenomanian relative sea-level change in other regions, e.g. Europe or northern Africa, suggests that both high- and low-frequency relative sea-level changes were governed by eustasy. The high-frequency relative sea-level fluctuations of ≈100 kyr periodicity and ≈10–20 m magnitude, similar to those recorded in other Cenomanian successions in North America and Central Europe, were probably related to Milankovitch-band, climate-driven eustasy. Either minor glacioeustatic fluctuations, superimposed on the overall greenhouse climate of the mid-Cretaceous, or mechanisms, such as the fluctuations in groundwater volume on continents or thermal expansion and contraction of sea water, could have controlled the high-frequency eustatic fluctuations.  相似文献   

14.
The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.  相似文献   

15.
《Sedimentary Geology》2005,173(1-4):151-185
An Early Miocene (Early Burdigalian) incised valley-fill was produced through development of an alluvial system during active extension and block rotation in the Mut Basin. Five phases of alluvial activity have been recognized and are linked to specific tectono-stratigraphic factors. The entrenchment phase (phase 1) was a response to a rapid decrease in accommodation caused by a combination of sea-level fall and accelerated tectonism that occurred around the basin during active extension. A lacustrine depositional system that pre-dated entrenchment was abruptly succeeded by an erosional fluvial system. The initial erosion, the entrenchment phase was followed by the deposition of ephemeral meandering fluvial facies and later by high sinuosity sandy meandering fluvial facies. During the aggradational phase (Phase 2), coarser-grained, lower sinuosity meandering river facies were vertically stacked in response to successive periods of fault-block rotation and basinal subsidence. The thickest stratigraphic interval was deposited during this time. Simultaneously in a basinward position, finer-grained distal facies were deposited. The succeeding backfilling phase (Phase 3) was marked by further fault-block rotation and an increase in the catchment area that resulted in higher flow regime and more sediment input. A further increase in accommodation space due to block rotation resulted in the retreat of facies belts, and the deposition of a retrogradational stacked gravelly low-sinuosity meandering facies during the early transgressive phase (Phase 4). In the downstream part of the alluvial valley, fluvio-deltaic and non-marine transitional facies were deposited and progressively retreated landwards during marine flooding. Phase 5 marks the main interval of Early Miocene marine transgression (a combination of global eustasy and regional epeiric subsidence). During this time, the facies belts within the incised valley-fill were dominated by estuarine and lagoonal facies assemblages, while the distal parts of the alluvial valley became completely flooded with marine waters. At the end of the transgressive phase, in the uppermost early Burdigalian, the estuarine and lagoonal facies migrated further inland, while shallow-marine sediments (reefal limestones) were deposited in distal parts of the now-drowned valley, blanketing the pre-existing topography.  相似文献   

16.
Analysis of 92 engineering core logs located in the Balize sector of the eastern Mississippi delta focuses on the late Wisconsin unconformity and lithofacies of strata lying immediately below and above this stratigraphic horizon. This major sequence boundary is a key feature used to correlate strata across shelf and slope to the basin. Observations emphasize lithofacies distributions of the latest Pleistocene sediments underlying the unconformity, the late Pleistocene to early Holocene transgressive facies, and the immediately overlying deltaic deposits. Maps and a cross-section compiled with this information highlight the critical relation between lithofacies distributions and late Wisconsin sea-level oscillations. Core analysis reveals that the transgressive facies comprises distinct environments of deposition, offshore to onshore. Findings identify criteria to determine the approximate position of the shoreline at the late Wisconsin maximum sea-level lowstand and at the extent of early Holocene maximum marine inundation in the Balize complex. Mapping of lithologies along the late Wisconsin unconformity serves to improve correlation of sediment facies with changes in acoustic response along high-resolution seismic profiles. An estimate of long-term averaged land subsidence suggests lowering of at least 1 mm/year near the shelfedge during the past 18 000 years. This mapping also refines sea-level response models for the Mississippi delta, including criteria to locate key paleogeographic features such as shelfedges and maximum flooding surfaces in other Recent marine deltas and in older, stacked deltaic sequences.  相似文献   

17.
This paper presents examples of various large tidal sandbodies from the Eocene Roda Sandstone in the southern Pyrenees and the Late Pleistocene and Early Holocene in the East China Sea. An attempt is made to summarize the geometric variability of these large tidal sandbodies in relation to the sediment supply and tidal discharge of the depositional system. Transverse sand bars were developed in low-sinuosity, high-gradient channels with high influxes of coarse sediments and water from fluvial systems. Tidal point bars were formed in meandering low-gradient estuarine channel where tidal influence was stronger and sediment was finer than those of the transverse sand bar. A tidal delta complex was built up at the estuary mouth with an abundant sediment supply and an increased tidal discharge. Tidal sand ridges were formed when relict fluvial or deltaic sands were eroded and reworked by strong tidal currents during subsequent sea-level rise.

Since the sediment supply and the tidal discharge of the depositional system were closely related to the eustatic sea-level change and basin subsidence, i.e. the relative sea-level change, special attention will be given to the relationship between geometric variability of tidal sandbodies and the sequence stratigraphic framework in which various sandbodies occurred. Three orders of eustatic sea-level fluctuations can be recognized. The third-order eustatic sea-level cycle, together with basin subsidence, controlled the development of systems tracts and the occurrence of different tidal sandbodies, such as estuary and tidal flat facies during the late stage of a LSW systems tract (type 1 sequence) or a SM systems tract (type 2 sequence); tidal point bar facies, tidal delta facies or tidal sand-ridge facies during a TR systems tract; estuary facies during an early HS systems tract; and fluvial sand bar facies in a late HS systems tract and the early stage of a SM or LSW systems tract. There are also the fourth-order and fifth-order eustatic fluctuations, which are superimposed on the third-order eustatic changes and have important control on the build-up, abandonment and preservation of composite and single tidal sandbodies, respectively.

Since the deposition of tidal sandbodies is very sensitive to eustatic sea-level changes, recognition of various tidal sandbodies is important in sequence stratigraphy analyses of sedimentary basins and in the facies prediction of clastic sediments in basin modelling.  相似文献   


18.
The Early Permian Gondwana regime succession of the Nilawahan Group is exposed only in the Salt Range of Pakistan. After a prolonged episode of non-deposition that spanned much of the Palaeozoic, the 350?m thick predominantly clastic sequence of the Nilawahan Group records a late glacial and post-glacial episode in which a range of glacio-fluvial, marine and fluvial environments evolved and accumulated. The Early Permian succession of the Salt Range has been classified into four formations, which together indicates a changing climatic regime during the Early Permian in the Salt Range region. The lower-most, Tobra Formation unconformably overlies a Cambrian sequence and is composed of tillite, diamictite and fresh water facies, which contain a floral assemblage (Gangamopteris and Glossopteris) that confirms an Asselian age. The Tobra Formation is overlain by marginal marine deposits of the Dandot Formation (Sakmarian), which contain an abundant brachiopods assemblage (Eurydesma and Conularia). Accumulation of the Dandot Formation was terminated by a regional sea-level fall and a change to the deposition of the fluvial deposits of the Warchha Sandstone (Artinskian). The Warchha Sandstone was deposited by high sinuosity meandering, avulsion prone river with well developed floodplains. This episode of fluvial sedimentation was terminated by a widespread marine transgression, as represented by the abrupt upward transition to the overlying shallow marine Sardhai Formation (Kungurian). The Early Permian Gondwana sequence represented by the Nilawahan Group is capped by predominantly shallow shelf carbonate deposits of the Tethyan realm. The sedimentologic and stratigraphic relationship of these four lithostratigraphic units in the Salt Range reveals a complex stratigraphic history for the Early Permian, which is mainly controlled by eustatic sea-level change due to climatic variation associated with climatic amelioration at the end of the major Gondwana glacial episode, and the gradual regional northward drift to a lower latitude of the Indian plate.  相似文献   

19.
The Upper Cretaceous (Cenomanian-Maastrichtian) of the south-central Pyrenees shows five carbonate platform sequences where the major parameters are tectonism, relative sea-level fluctuations and inherited depositional profile. Depositional geometries and basin analysis permit an understanding of the depositional history.Five depositional sequences have been recognized: (1) The Santa Fe sequence (Middle-Upper Cenomanian), a ramp to a skeletal rimmed shelf with an escarpment bypass margin. The lower boundary is an angular unconformity and the upper one records a sea-level drop. The platform location of the margin was determined by a listric normal fault. (2) An abrupt sea-level rise drowned the former platform. The Congost sequence (Turonian-Lower Coniacian), a distally steepened ramp with erosional distal deep slope. The depositional model was largely controlled by pre-existing basin morphology. Cessation of platform development was due to a relative sea-level drop. (3) The Sant Corneli sequence (Upper Coniacian-Lower Santonian), a mixed terrigenous-skeletal homoclinal ramp with upright margin, deep slope and dysaerobic basin. The slope results from the backstepping by 24 km of the previous margin and gentle basin tilting. The platform margin remained more or less at the same position, and relief between platform and slope increased indicating continuous relative sea-level rise. The upper boundary is an angular unconformity at the platform margin produced by an abrupt sea-level rise and platform drowning, and by listric normal faulting. (4) The Vallcarga sequence (Upper Santonian-Campanian), a distal-steepened skeletal homoclinal ramp, erosional escarpment and turbidite basin, which corresponds to the Mesozoic maximum marine expansion. A listric normal fault created two depositional areas: a more or less flat footwall block with a north-northwest prograding carbonate ramp.  相似文献   

20.
《Sedimentary Geology》2001,139(3-4):171-203
Carbonates in the upper member of the Mesoproterozoic Victor Bay Formation are dominated by lime mud and packaged in cycles of 20–50 m. These thicknesses exceed those of classic shallowing-upward cycles by almost a factor of 10. Stratigraphic and sedimentological evidence suggests high-amplitude, high-frequency glacio-eustatic cyclicity, and thus a cool global climate ca. 1.2 Ga.The Victor Bay ramp is one of several late Proterozoic carbonate platforms where the proportions of lime mud, carbonate grains, and microbialites are more typical of younger Phanerozoic successions which followed the global waning of stromatolites. Facies distribution in the study area is compatible with deposition on a low-energy, microtidal, distally steepened ramp. Outer-ramp facies are hemipelagic lime mudstone, shale, carbonaceous rhythmite, and debrites. Mid-ramp facies are molar-tooth limestone tempestite with microspar-intraclast lags. In a marine environment where stromatolitic and oolitic facies were otherwise rare, large stromatolitic reefs developed at the mid-ramp, coeval with inner-ramp facies of microspar grainstone, intertidal dolomitic microbial laminite, and supratidal evaporitic red shale.Deep-subtidal, outer-ramp cycles occur in the southwestern part of the study area. Black dolomitic shale at the base is overlain by ribbon, nodular, and carbonaceous carbonate facies, all of which exhibit signs of synsedimentary disruption. Cycles in the northeast are shallow-subtidal and peritidal in character. Shallow-subtidal cycles consist of basal deep-water facies, and an upper layer of subtidal molar-tooth limestone tempestite interbedded with microspar calcarenite facies. Peritidal cycles are identical to shallow-subtidal cycles except that they contain a cap of dolomitic tidal-flat microbial laminite, and rarely of red shale sabkha facies or of sandy polymictic conglomerate. A transect along the wall of a valley extending 8.5 km perpendicular to depositional strike reveals progradation of inner-ramp tidal flats over outer- and mid-ramp facies during shoaling. The maximum basinward progradation of peritidal facies coincides with a zone of slope failure that may have promoted the development of the stromatolitic reefs.The sea-level history of the Victor Bay Formation is represented by three hectometre-scale sequences. An initial flooding event resulted in deposition of the lower Victor Bay shale member. Upper-member carbonate cycles were then deposited during highstand. Mid-ramp slumping was followed by late-highstand reef development. The second sequence began with development of an inner-ramp lowstand unconformity and a thick mid-ramp lowstand wedge. A second transgression promoted a more modest phase of reef development at the mid-ramp and shallow-water deposition continued inboard. A third and final transgressive episode eventually led to flooding of the backstepping ramp.Overall consistent cycle thickness and absence of truncated cycles, as well as the high rate and amount of creation of accommodation space, suggest that the periodicity and amplitude of sea-level fluctuation were relatively uniform, and point to a eustatic rather than tectonic mechanism of relative sea-level change. High-amplitude, high-frequency eustatic sea-level change is characteristic of icehouse worlds in which short-term, large-scale sea-level fluctuations accompany rapidly changing ice volumes affected by Milankovitch orbital forcing. Packaging of cyclic Upper Victor Bay carbonates therefore supports the hypothesis of a late Mesoproterozoic glacial period, as proposed by previous workers.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号