首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 218 毫秒
1.
In Developments in a non-destructive method of determining rock strength, Allison (1990) compares data collected using an ultrasonic apparatus with data obtained from Schmidt hammer tests. He concludes that the Schmidt hammer data shows a wide degree of scatter and that its accuracy as field technique is questionable. No discussion is made of how the Schmidt hammer was used or of the total number of readings taken and the range of values. The graphs presented comparing data derived from some samples using ultrasonic equipment do not appear markedly at variance from the Schmidt hammer-derived data but true comparison is not possible because the graphs use different measurement criteria. No information is given on comparative time and financial costs, which must be significantly different for the two techniques.  相似文献   

2.
Material strength is an important variable for any study of the relationships between rock mass geomechanical characteristics and landform development. Standard field and laboratory tests for measuring strength present a variety of problems to the geomorphologist. Recent studies (Allison, 1988) have described a laboratory based non-destructive method for indirectly determining material strength, by measuring Dynamic Young's Modulus. Data presented here suggest that the same apparatus can be used as a field technique. Tests have been conducted on the Devonian limestone of the Napier Range, Western Australia. Laboratory results obtained using the non-destructive ultrasonic apparatus have a high correlation with triaxial Hoek Cell tests. Results from on-site tests have much greater accuracy than data collected using the Schmidt hammer, which is currently the most widely used geomorphological field technique for determining rock strength.  相似文献   

3.
Rock resistance to erosion is an often described factor in geomorphic studies, and is generally considered to strongly influence the shape of erosional landforms. However, the property of the rock mass that enables it to resist erosion is rarely considered, and its measurement is rarely justified and assessed adequately. Allison (1988, 1990) examined the intact strength properties of several types of carbonate rocks and considered that dynamic Young's modulus is a good indicator of rock material strength for geomorphic purposes, and cast doubts on the reliability of Schmidt hammer tests for this purpose. Alternative approaches to rock characterization from the view point of evaluating rock intact strength are considered.  相似文献   

4.
Rapid, field‐based assessments of rock hardness are required in a broad range of geomorphological investigations where rock intact strength is important. Several different methods are now available for taking such measurements, in particular the Schmidt hammer, which has seen increasing use in geomorphology in recent decades. This is despite caution from within the engineering literature regarding choice of Schmidt hammer type, normalization of rebound (R‐) values, surface micro‐roughness, weathering degree and moisture content, and data reduction/analysis procedures. We present a pilot study of the use of an Acoustic Energy Meter (AEM), originally produced, tested and developed within the field of underground mining engineering as a rapid measure of rock surface hardness, and compare it with results from a mechanical N‐Type Schmidt hammer. We assess its capabilities across six lithological study sites in southeast Queensland, Australia, in the Greater Brisbane area. Each rock exposure has been recently exposed in the 20th/21st century. Using a ‘paired’ sampling approach, the AEM G‐value shows an inverse relationship with Schmidt hammer R‐value. While both devices show variability with lithology, the AEM G‐values show less scatter than the Schmidt hammer. We conclude that each device can contribute to useful rock hardness testing in geomorphological research, but the AEM requires further field testing in a range of environments, and in particular on older and naturally‐exposed rock surfaces. Future evaluations can extend this pilot study by focusing on sampling procedures, energy sources, and data reduction protocols, within the framework of a comparison study with other rock hardness testing apparatus. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

5.
This study presents rock strength variations at granite outcrops and in subsurface vertical profiles in the Jizerské hory Mountains, Czech Republic. Schmidt hammer rebound values in subsurface profiles change gradually from the bedrock surface downward. An exponential relation has been observed between the R‐values and depth in rock outcrops to a depth of around 4·5 m. The exponential nature of the curve indicates that rock hardness increases more rapidly with depth in the uppermost 1?m section of the rock profile. A detailed study of rebound values obtained from both intact and polished rock exposures reveal effects of surface grinding on results of the Schmidt hammer method. The range of data collected increases after grinding, allowing more precise discrimination of rock surfaces in respect of age and weathering. The Schmidt hammer method may be used effectively as a relative‐age dating tool for rock surfaces that originated during the Late Pleistocene. It is concluded that this time limitation can be significantly mitigated by surface grinding before measurement. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
The Schmidt hammer is a useful tool applied by geomorphologists to measure rock strength in field conditions. The essence of field application is to obtain a sufficiently large dataset of individual rebound values, which yields a meaningful numerical value of mean strength. Although there is general agreement that a certain minimum sample size is required to proceed with the statistics, the choice of size (i.e. number of individual impacts) was usually intuitive and arbitrary. In this paper we show a simple statistical method, based on the two‐sample Student's t‐test, to objectively estimate the minimum number of rebound measurements. We present the results as (1) the ‘mean’ and ‘median’ solutions, each providing a single estimate value, and (2) the empirical probability distribution of such estimates based on many field samples. Schmidt hammer data for 14 lithologies, 13–81 samples for each, with each sample consisting of 40 individual readings, have been evaluated, assuming different significance levels. The principal recommendations are: (1) the recommended minimum sample size for weak and moderately strong rock is 25; (2) a sample size of 15 is sufficient for sandstones and shales; (3) strong and coarse rocks require 30 readings at a site; (4) the minimum sample size may be reduced by one‐third if the context of research allows for higher significance level for test statistics. Interpretations based on less than 10 readings from a site should definitely be avoided. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
As part of a study on freeze-thaw weathering in the maritime Antarctic an investigation was made of the physical properties of the local rock. Tests were made of point-load compressive strength, Schmidt hammer in situ rock strength, moisture content, indentor resistance and the size range of weathering products. The resulting data were used to consider the form of freeze-thaw weathering operative in the field and its relationship to laboratory simulations. A distinct difference between ‘massive rock’ and ‘intact rock’ is observed in the field. It is suggested that future studies should generate a greater database pertaining to rock properties as it is an invaluable aid in the study of mechanical weathering.  相似文献   

8.
At Writing-On-Stone Provincial Park in southern Alberta, Canada, weathering is causing deterioration and loss of archaeologically important Indian rock art. A procedure devised for the use of park personnel identified four classes of weathering ranging from largely unweathered rock to severely weathered. The technique employed simple visual, qualitative assessment and photo interpretation of 50 sample sections of sandstone cliff face covering a total area of 354 m2. Schmidt hammer tests indicated large variations in rock strength and provided a numerical basis for the visual assessment. About 43 per cent of the cliffs are severely to completely weathered, 41 per cent show moderate weathering.  相似文献   

9.
In mining and civil engineering projects, physico-mechanical properties of the rock affect both the project design and the construction operation. Determination of various physico-mechanical properties of rocks is expensive and time consuming, and sometimes it is very difficult to get cores to perform direct tests to evaluate the rock mass. The purpose of this work is to investigate the relationships between the different physico-mechanical properties of the various rock types with the P-wave velocity. Measurement of P-wave velocity is relatively cheap, non-destructive and easy to carry out. In this study, representative rock mass samples of igneous, sedimentary, and metamorphic rocks were collected from the different locations of India to obtain an empirical relation between P-wave velocity and uniaxial compressive strength, tensile strength, punch shear, density, slake durability index, Young’s modulus, Poisson’s ratio, impact strength index and Schmidt hammer rebound number. A very strong correlation was found between the P-wave velocity and different physico-mechanical properties of various rock types with very high coefficients of determination. To check the sensitivity of the empirical equations, Students t test was also performed, which confirmed the validity of the proposed correlations.  相似文献   

10.
The Schmidt hammer is employed by geomorphologists as a convenient field instrument for measuring the hardness of rock surfaces. Field trials indicate that the readings obtained are a function of not only the hardness of the surfaces but also their texture. Smooth planar surfaces give much higher readings than rough or irregular surfaces. This makes interpretation of the results particularly difficult when the hammer is used to measure the hardness of natural rock surfaces that have been roughened by weathering.  相似文献   

11.
Application of Schmidt‐hammer exposure‐age dating (SHD) to landforms has substantially increased in recent years. The original mechanical Schmidt hammer records R‐(rebound) values. Although the newly introduced electronic Schmidt hammer (SilverSchmidt) facilitates greatly improved data processing, it measures surface hardness differently, recording Q‐(velocity) values that are not a priori interconvertible with R‐values. This study is the first to compare the performance of both instruments in the context of field‐based exposure‐age dating with a particular focus on the interconvertibility of R‐values and Q‐values. The study was conducted on glacially polished pyroxene‐granulite gneiss, Jotunheimen, southern Norway. Results indicate that mean Q‐values are consistently 8–10 units higher than mean R‐values over the range of values normally encountered in the application of SHD to glacial and periglacial landforms. A convenient conversion factor of ±10 units may, therefore, be appropriate for all but the softest rock types close to the technical resolution of the instruments. The electronic Schmidt hammer should therefore be regarded as a useful complement and potential replacement for the mechanical Schmidt hammer. Conversion of published R‐values data to Q‐values requires, however, careful control and documentation of instrument calibration. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
Rock material strength is an important component of many geomorphological studies. Current methods for determining this parameter result in sample destruction, preventing further analysis. A new non-destructive technique is described for indirectly determining material strength, by measuring Dynamic Young's Modulus. Tests have been conducted on Jurassic Portland Limestone and Upper Cretaceous Chalk to assess the apparatus. Young's Modulus is becoming an increasingly important rock material property.  相似文献   

13.
There are a number of techniques for estimating the amount of weathering a clast has undergone. These usually have the objective of establishing an ordinal chronology of geomorphological surfaces, or investigation of site-specific conditions affecting weathering rates. Three such techniques are applied to a dated sequence of alluvial fan segments in southern Tunisia. Two of these techniques depend on measuring surface roughness (the micro-roughness meter and a displacement approach) and one uses the structural weakening of the rock fabric (Schmidt hammer). The micro-roughness meter enables calculation of standard deviation of surface height variation, root mean square roughness and surface autocorrelation function. Of these techniques, Schmidt hammer rebound values, standard deviation, root mean square roughness and the displacement technique show systematic changes on the three fan segments which are statistically significant at the 0·05 level. However, the amount of variance in all datasets is very large, indicating the need for caution in application of these techniques for relative dating. © 1998 John Wiley & Sons, Ltd.  相似文献   

14.
An Erratum has been published for this article in Earth Surface Processes and Landforms 27(7) 2004, 931. Lord Howe Island, in the northern Tasman Sea, is a remnant of a much larger Late Miocene basaltic shield volcano. Much of the island's coastline is exposed to waves that have unlimited fetch, but a marked contrast is provided by a fringing coral reef and lagoon that very effectively attenuate wave energy along a portion of the western coastline. The geology of the island is varied, with hard and resistant basalt lavas, breccias and tuffs of intermediate resistance, and highly erodible eolianites. This variability provides an excellent opportunity to examine the in?uence of rock resistance on the development of the spectacular rock coast landforms that occur around the island. The hardness of rocks and the extent of weathering around the coastline were assessed using a Schmidt hammer, and statistical analysis was undertaken to remove outlying values. On all but one occasion, higher mean rebound values were returned from fresh surfaces than weathered surfaces, but only half of these differences were statistically signi?cant. Shore platforms with two distinct levels are juxtaposed along two stretches of coastline and Schmidt hammer results lend support to hypotheses that the raised surfaces may be inherited features. Relative rock resistance was assessed through a combination of Schmidt hammer data and measurements of joint density, and constrained on the basis of morphological data. This approach formed a basis for examining threshold conditions for sea‐cliff erosion at Lord Howe Island in the context of the distribution of resistant plunging cliffs and erosional shore platforms. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

15.
The Schmidt hammer has for some years been used to measure the hardness of different rock surfaces and to date relatively boulders in moraine deposits. In this paper applications on isostatically raised boulder-beaches and rocky shores are described. The research area is the northern Swedish Bothnian coast where present isostatic uplift is between 0.8-1.0 cm year?1. Elevations above sea-level can be converted to a timescale. Rebound values (R) of the Schmidt hammer are correlated with the altitude and the degree of rock weathering can be estimated for each site. Eight sites with boulder-beaches and nine sites with rocky shores have been analysed. For boulder-beaches correlation-coefficients of 0.82-0.97 for weathering values (R) and the elevations above sea-level were obtained. For the rocky shores these values were calculated to 0.75-0.97. This method has applications in both geomorphology and archaeology. For example, a deep layer of weathered dolerite in the Nordingrå region, which previously has been regarded as a post-Weichselian formation, can be shown to be of pre-Weichselian origin. Several archaeological applications are also mentioned in the paper.  相似文献   

16.
Tafone‐like depressions have developed on the Aoshima sandstone blocks used for a masonry bridge pier in the coastal spray zone. A thin layer of partial granular disintegration was found on the surface in depressions. To evaluate quantitatively the strength of the thin weathered layer, the hardness was measured at the surface of the sandstone blocks using both an Equotip hardness tester and an L‐type Schmidt hammer. Comparison of the two testing results indicates that the Equotip hardness value is more sensitive in evaluating the strength of a thin layer of weathered surface rock than the Schmidt hardness value. By applying two methods, i.e. both the repeated impact method and the single impact method, the Equotip tester can evaluate the strengths of fresh internal and weathered surficial portions of rocks having a thin weathering layer. Comparison of the two strengths enables evaluation of strength reduction due to weathering. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
In an assessment of the influence of internal rock moisture content on Schmidt hammer readings, rebound (R) values are found to decrease with increasing moisture content. For samples of basalt, sandstone and dolerite the maximum decrease in R‐values is found between oven dry values and saturated rock rebound values, the magnitude of which varies from 2 to 10 points on the R‐scale. A quartzite block has the greatest decline of 6 points at 60 per cent saturation. For certain rock types under differing site‐to‐site field moisture conditions the moisture effect can be a significant factor in the interpretation of the relative state of weathering from rebound values. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

18.
Fires occur frequently in many biomes and generate high temperatures on the ground surface. There are many field examples of fire causing rock disintegration. The simulation of fire in the laboratory (using a furnace) and the monitoring of changes in rock modulus of elasticity (with a Grindosonic apparatus), reveal that different rocks respond differently to heating. Significant decreases in elasticity occur at temperatures as low as 200°C and granites display particularly marked reductions. Extended periods of heating are not required for significant reductions to occur. It is postulated that the degree of change in elasticity as a result of simulated fire is such that rock outcrops subjected to real fires are likely to be sufficiently modified as to increase their susceptibility to erosion and weathering processes.  相似文献   

19.
Erosion processes in bedrock‐floored rivers shape channel cross‐sectional geometry and the broader landscape. However, the influence of weathering on channel slope and geometry is not well understood. Weathering can produce variation in rock erodibility within channel cross‐sections. Recent numerical modeling results suggest that weathering may preferentially weaken rock on channel banks relative to the thalweg, strongly influencing channel form. Here, we present the first quantitative field study of differential weathering across channel cross‐sections. We hypothesize that average cross‐section erosion rate controls the magnitude of this contrast in weathering between the banks and the thalweg. Erosion rate, in turn, is moderated by the extent to which weathering processes increase bedrock erodibility. We test these hypotheses on tributaries to the Potomac River, Virginia, with inferred erosion rates from ~0.1 m/kyr to >0.8 m/kyr, with higher rates in knickpoints spawned by the migratory Great Falls knickzone. We selected nine channel cross‐sections on three tributaries spanning the full range of erosion rates, and at multiple flow heights we measured (1) rock compressive strength using a Schmidt hammer, (2) rock surface roughness using a contour gage combined with automated photograph analysis, and (3) crack density (crack length/area) at three cross‐sections on one channel. All cross‐sections showed significant (p < 0.01 for strength, p < 0.05 for roughness) increases in weathering by at least one metric with height above the thalweg. These results, assuming that the weathered state of rock is a proxy for erodibility, indicate that rock erodibility varies inversely with bedrock inundation frequency. Differences in weathering between the thalweg and the channel margins tend to decrease as inferred erosion rates increase, leading to variations in channel form related to the interplay of weathering and erosion rate. This observation is consistent with numerical modeling that predicts a strong influence of weathering‐related erodibility on channel morphology. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

20.
A Schmidt test hammer was employed to assess the aggregate surface hardness of samples of boulders dug out from under late-lying snowpatches at sites in Switzerland, Scotland and Norway. The results were compared with an equivalent set of readings made on boulders at nearby snow-free control sites. The results in every case reveal that the aggregate surface hardness of boulders buried by late-lying snow is significantly less (at the 0·001 level) than that of boulders at the corresponding control sites. This result indicates that late-lying snow significantly enhances rock weathering, probably because boulder and rock surfaces are exposed to prolonged wetting by percolating meltwater under late-lying snowbeds.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号