共查询到20条相似文献，搜索用时 67 毫秒
1.
F. AMINZADEH 《Geophysical Prospecting》1989,37(8):893-906
Data from offshore Norway is used to study applications of elastic VSP modelling in detecting shear waves and observing the effects of successive mode conversion in field-recorded VSP data. The shear-wave velocities and densities from log data are used in conjunction with compressional wave velocities determined from surface seismic and log data in the VSP modelling. The time domain non-normal incidence elastic VSP modelling technique of Aminzadeh and Mendel is used as the modelling algorithm. Two surface seismograms are computed first. One is the vertical component and the other is the horizontal component for plane waves that have specified incident angles. A downward continuation method is then applied to generate seismograms at different depth points. The collection of these seismograms constitutes non-normal incidence VSPs. Both vertical and horizontal components of VSP data can be obtained by this procedure. In this paper non-normal incidence VSPs are generated for a 12.5° incident plane wave. The modelling results of layered earth systems of thin layers and thick layers are both compared with field data, and the effect of mode conversions in thin layers is observed. Several events in the field data can be explained by this elastic VSP modelling. Comparison of the model data and field data enabled a probable tube wave or out-of-plane event to be identified, the removal of which significantly improved the final VSP section. This study also shows how the VSP data helped the interpretation of the surface 3D data. 相似文献
2.
常规陆上VSP(Vertical Seismic Profiling)勘探普遍采用纵波震源激发,三分量检波器接收,主要利用的是纵波和转换横波信息。已有的研究表明,炸药震源在井下激发、可控震源在地面垂向振动,均会产生较强的纯纵波和一定强度的纯横波;泊松比差别较大的分界面有利于形成较强的透射转换横波。本文通过对激发形成的纯横波和下行转换形成的横波进行对比分析,认为纯横波的主频往往低于纯纵波的主频,而下行转换横波的主频通常接近纵波的主频。本文分别对两个陆上纵波源零偏和非零偏VSP资料进行分析,结果表明这些资料中普遍存在纯横波,只是横波的强弱存在不同程度的变化。利用纵波源零偏VSP资料,可以获得横波速度信。最后对VSP纵波和横波联合应用前景进行了分析,应该充分利用纵波源VSP资料中的横波信息。 相似文献
3.
Seismic attenuation in Faroe Islands basalts 总被引：2，自引：1，他引：1
F. Shaw M.H. Worthington R.S. White M.S. Andersen U.K. Petersen the Seifaba Group 《Geophysical Prospecting》2008,56(1):5-20
We analysed vertical seismic profiling (VSP) data from two boreholes at Glyvursnes and Vestmanna on the island of Streymoy, Faroe Islands, to determine the magnitude and causes of seismic attenuation in sequences of basalt flows. The work is part of SeiFaBa, a major project integrating data from vertical and offset VSP, surface seismic surveys, core samples and wireline log data from the two boreholes. Values of effective seismic quality factor (Q) obtained at Glyvursnes and Vestmanna are sufficiently low to significantly degrade the quality of a surface reflection seismic image. This observation is consistent with results from other VSP experiments in the North Atlantic region. We demonstrate that the most likely cause of the low values of effective Q at Glyvursnes and Vestmanna is a combination of 1D scattering and intrinsic attenuation due to seismic wave‐induced fluid flow within pores and micro‐cracks. Tests involving 3D elastic wave numerical modelling with a hypothetical basalt model based on field observations, indicate that little scattering attenuation is caused by lateral variations in basalt structure. 相似文献
4.
J.W.M. DANKBAAR 《Geophysical Prospecting》1987,35(7):803-814
In vertical seismic profile's (VSP's) shot with a large source offset, rays from shot to receiver can have large angles of incidence. Shear waves generated by the source and by conversions at interfaces are likely to be recorded by both the vertical and the horizontal geophones. Varying angles of incidence may give strong variations in the recorded amplitudes. Separation of P- and SV-waves and recovery of their full amplitudes are important for proper processing and interpretation of the data. A P-S separation filter for three-component offset VSP data is presented which performs this operation. The separation filter is applied in the k-f domain and needs an estimate of the P- and S-velocities along the borehole as input. Implementation and stability aspects of the filter are considered. The filter was tested on an 1800 m offset VSP and appeared to be robust. Large velocity variations along the borehole could be handled and results were superior to those obtained by velocity filtering. 相似文献
5.
南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化,为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息,对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题,采用了大容量气枪震源并设计了气枪阵列组合方式,提高了激发地震波的能量,获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法,对VSP观测数据进行处理,获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据,建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系,实现了不同尺度的地质和地球物理属性资料的有效衔接,标定了钻井地质剖面上各深度地质体的地震反射特性,厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息,成为建立南黄海海相地层速度模型主要的资料来源,也是地震资料的岩性反演处理不可缺少的信息. 相似文献
6.
Estimation of Thomsen＇s anisotropic parameters is very important for accuratetime-to-depth conversion and depth migration data processing. Compared with othermethods, it is much easier and more reliable to estimate anisotropic parameters that arerequired for surface seismic depth imaging from vertical seismic profile （VSP） data, becausethe first arrivals of VSP data can be picked with much higher accuracy. In this study, wedeveloped a method for estimating Thomsen＇s P-wave anisotropic parameters in VTImedia using the first arrivals from walkaway VSP data. Model first-arrival travel times arecalculated on the basis of the near-offset normal moveout correction velocity in VTI mediaand ray tracing using Thomsen＇s P-wave velocity approximation. Then, the anisotropicparameters 0 and e are determined by minimizing the difference between the calculatedand observed travel times for the near and far offsets. Numerical forward modeling, usingthe proposed method indicates that errors between the estimated and measured anisotropicparameters are small. Using field data from an eight-azimuth walkaway VSP in TarimBasin, we estimated the parameters 0 and e and built an anisotropic depth-velocity modelfor prestack depth migration processing of surface 3D seismic data. The results showimprovement in imaging the carbonate reservoirs and minimizing the depth errors of thegeological targets. 相似文献
7.
Vertical geophone arrays in boreholes have been used for many years to study seismic velocities by investigating the first arrivals of records. The development of the vertical seismic profiling (VSP) technique shows possibilities of using the reflected events to close the gap between interpretation of conventional seismic data and physical observations made in the well. Reflected events recorded by vertical arrays (as in VSP) generally have higher signal-to-noise ratio, larger bandwidth and can easily be separated from multiples. The new Continuous Vertical Array (CVA) technique combines vertical arrays in several boreholes with a line of source points near the surface. The result is a multi-covered seismic line similar to that of a conventional seismic survey, but it retains the benefits of observations with vertical arrays. The possibilities of the new technique are discussed with the aid of theoretical considerations, model studies, and a first field case using nine boreholes 500 m apart with depths of 400 m. New data acquisition and processing techniques (mainly migration before stack) have been developed. The CVA-seismic method is still in the development stage but promises new possibilities for detailed surveys in difficult areas. 相似文献
8.
提出了一种使用慢度矢量分量和偏振矢量计算变井源距垂直地震剖面(walkaway VSP)钻孔中接收点附近介质弱各向异性(WA)参数的方法. 假定介质是任意弱各向异性介质, 从一般公式中得到了只有一条观测剖面情况下的反演公式. 如果知道了慢度矢量的垂直分量和偏振矢量, 可以通过反演得到与剖面和钻孔所在平面相关的WA参数, 反演过程不用进行射线追踪, 与上覆介质无关. 用合成数据检验了公式和方法的正确性, 并把它们应用于在爪哇海地区得到的一条变井源距垂直地震剖面的弱各向异性参数反演中. 相似文献
9.
We investigated the seismic attenuation of compressional (P‐) and converted shear (S‐) waves through stacked basalt flows using short‐offset vertical seismic profile (VSP) recordings from the Brugdan (6104/21–1) and William (6005/13–1A) wells in the Faroe‐Shetland Trough. The seismic quality factors (Q) were evaluated with the classical spectral ratio method and a root‐mean‐square time‐domain amplitude technique. We found the latter method showed more robust results when analysing signals within the basalt sequence. For the Brugdan well we calculated effective Q estimates of 22–26 and 13–17 for P‐ and S‐waves, respectively, and 25–33 for P‐waves in the William well. An effective QS/QP ratio of 0.50–0.77 was found from a depth interval in the basalt flow sequence where we expect fully saturated rocks. P‐wave quality factor estimates are consistent with results from other VSP experiments in the North Atlantic Margin, while the S‐wave quality factor is one of the first estimates from a stacked basalt formation using VSP data. Synthetic modelling demonstrates that seismic attenuation for P‐ and S‐waves in the stacked basalt flow sequence is mainly caused by one‐dimensional scattering, while intrinsic absorption is small. 相似文献
10.
地震干涉是近几年勘探地球物理领域研究的一个热点方向,它是波场重构的有力工具.然而,地震干涉往往引入虚假同相轴,影响波场重构的质量.为进一步分析虚假同相轴产生的原因并改善波场重构的质量,本文基于稳相分析,详细探讨子波主频、激发炮数、检波器埋深、检波器间距和地层倾角五个因素对波场重构的影响.模型结果表明,震检排列方式和地层倾角等因素通过改变有限震检范围内稳相点的位置来影响波场重构的质量.将垂直地震剖面VSP中的下行直达波与下行反射波进行地震干涉处理,可有效重构来自高陡反射面的下行反射波,将传统的VSP转化为单井地震剖面SWP.直接利用重构SWP波场进行成像,不仅扩大传统VSP的成像范围,而且避免常规勘探面临的静校正和近地表速度建模问题,为高陡构造成像提供一种新方法. 相似文献
11.
受井中检波器串级数局限,垂直地震剖面(VSP)反射波成像范围窄,且不能对井中最浅接收点上方区域有效成像.虽然多次波成像能扩大成像范围,但在实际应用中尚有诸多困难和挑战.本文根据Wapenaar的地震干涉理论,基于上下行波场分离技术,研发了VSP地震干涉成像方法.该方法将VSP自由表面多次波重建为在地表震源位置激发(虚震源)接收的拟地面地震反射波,然后偏移成像,以达到对多次波间接成像的目的.通过数值模型实验,测试了VSP干涉成像的极限分辨率,并讨论了主要采集参数的影响,结果表明:该方法的垂向和水平极限分辨率分别达约10m和20m,且能分辨深度达6500m处的50m×100m溶洞;采用12至24道井中检波器串采集的VSP资料,其干涉成像结果显著优于VSP反射波成像,与相应的地面地震成像效果相当.将本文方法应用于新疆地区采集的VSP资料,结果表明:与VSP反射波成像相比,成像同相轴更加连续,成像范围显著扩大;与地面地震成像相比,成像结果相当,尤其在浅中部甚至更好.新方法不仅无需进行井中接收点静校正,且能显著增大成像范围,有利于成像同相轴的追踪对比、地震属性提取和地质解释,尤其对中国新疆地区深部缝洞型储层的成像,具有广泛的实际应用前景. 相似文献
12.
We present a simple method for estimating an effective source wavelet from the first arrival in marine vertical seismic profiling (VSP) data. The method, which utilizes the free-space Green's function of the Helmholz equation, is simple and very computer efficient. We show examples from synthetic and real offset and walkaway VSP data. In the synthetic examples, we show that data modelled with the estimated wavelet give small residuals when subtracted from the reference data. In the real data examples, we show that when modelling with the wavelet estimated from the real data, in a smooth macromodel, we obtain a good fit between the first arrivals in the real and modelled data. 相似文献
13.
14.
R. MJELDE 《Geophysical Prospecting》1992,40(6):605-617
P-wave and S-wave data acquired with vertical seismic profiling (VSP) often include tube waves propagating in the borehole, although considerable efforts are generally made to ensure that these waves are not recorded. However, several theoretical studies have indicated that tube waves could provide important information about the rock formation and thus should not be considered as pure noise. In order to study some of these aspects experimentally, tube waves were acquired by VSP in a well in the Paris Basin both before and after casing. A sparker was used as source inside the borehole, which ensured that the data recorded contained high-amplitude tube waves. It is shown that the casing is an obstacle which prevents the study of formation parameters, and thus further tube-wave acquisitions should be carried out in open holes only. The before-casing tube-wave reflection log is compared to a synthetic log computed from the sonic log. The high resolution of the tube waves is of particular interest, revealing layers that are too thin to be detected in body-wave surveys. It has recently been suggested that the projection of the tube-wave polarization in the horizontal plane can be used to determine directions of stress-induced anisotropy in the rock formation. Strong polarization anomalies are observed in the data sets but are attributed to tool problems rather than any rock-formation feature. 相似文献
15.
Fluid flow in many hydrocarbon reservoirs is controlled by aligned fractures which make the medium anisotropic on the scale of seismic wavelength. Applying the linear‐slip theory, we investigate seismic signatures of the effective medium produced by a single set of ‘general’ vertical fractures embedded in a purely isotropic host rock. The generality of our fracture model means the allowance for coupling between the normal (to the fracture plane) stress and the tangential jump in displacement (and vice versa). Despite its low (triclinic) symmetry, the medium is described by just nine independent effective parameters and possesses several distinct features which help to identify the physical model and estimate the fracture compliances and background velocities. For example, the polarization vector of the vertically propagating fast shear wave S1 and the semi‐major axis of the S1‐wave normal‐moveout (NMO) ellipse from a horizontal reflector always point in the direction of the fracture strike. Moreover, for the S1‐wave both the vertical velocity and the NMO velocity along the fractures are equal to the shear‐wave velocity in the host rock. Analysis of seismic signatures in the limit of small fracture weaknesses allows us to select the input data needed for unambiguous fracture characterization. The fracture and background parameters can be estimated using the NMO ellipses from horizontal reflectors and vertical velocities of P‐waves and two split S‐waves, combined with a portion of the P‐wave slowness surface reconstructed from multi‐azimuth walkaway vertical seismic profiling (VSP) data. The stability of the parameter‐estimation procedure is verified by performing non‐linear inversion based on the exact equations. 相似文献
16.
当前的三维VSP地震数据偏移成像实现都是在共炮点道集或共检波点道集中逐个道集循环进行的,计算效率相对较低.根据三维VSP观测系统中炮点和检波点布置的特殊性和地震波场满足线性叠加的特性,本文提出了一种三维VSP数据的高效偏移成像方法,即首先通过对三维VSP共接收点道集进行地震数据的广义合成得到一种超道集,然后在共接收点道集的波场深度外推过程中逐步应用多震源波场对超道集进行偏移成像,即利用一次波场深度外推循环完成对所有共检波点道集数据的偏移成像.通过三维VSP模型数据与实际地震数据的偏移成像试验验证了这种高效的超道集偏移成像方法可取得与常规共检波点道集相当的偏移成像效果,还具有极高的计算效率,其计算量与单个共检波点道集的偏移成像计算量相当. 相似文献
17.
Alexander Droujinine 《Geophysical Prospecting》2005,53(1):37-63
Walkaway vertical seismic profile (VSP) data acquired in basalt‐covered areas can be used to improve knowledge of the sub‐basalt structure. A synthetic example and a case study from the North Atlantic (UK) show that elastic two‐way downward‐continuation migration combined with the stationary‐phase principle is well suited to the processing of VSP data. Vector data are processed using decoupled elastic migration algorithms in both isotropic and anisotropic media. To illustrate the value of decoupled imaging equations, conventional PP imaging is carried out on the enhanced VSP data and compared with the decoupled scheme. Decoupled vector migration operates directly on the displacement vector, and uses various wave modes. Downgoing waves are migrated to image basalt lava flows and measure their anisotropy. Upgoing waves are used for high‐resolution sub‐basalt imaging. 相似文献
18.
本文首先解决了声波方程的非Born近似的正演计算问题,从而获得理论上不带近似的正演数据;然后,推导了井间（CBP）、垂直地震剖面（VSP）和地面反射（SRP）三种不同的数据采集方式下的衍射CT的重建公式;利用这些重建算法和正演数据,系统地研究了影响到地球物理CT成象质量的三种因素,即:（1）数据采集方式,（2）异常程度和（3）成象区域的尺寸,对重建图象的影响;并比较了衍射地震CT和射线地震CT的成象质量。 相似文献
19.
Due to the complicated geophysical character of tight gas sands in the Sulige gasfield of China, conventional surface seismic has faced great challenges in reservoir delineation. In order to improve this situation, a large‐scale 3D‐3C vertical seismic profiling (VSP) survey (more than 15 000 shots) was conducted simultaneously with 3D‐3C surface seismic data acquisition in this area in 2005. This paper presents a case study on the delineation of tight gas sands by use of multi‐component 3D VSP technology. Two imaging volumes (PP compressional wave; PSv converted wave) were generated with 3D‐3C VSP data processing. By comparison, the dominant frequencies of the 3D VSP images were 10–15 Hz higher than that of surface seismic images. Delineation of the tight gas sands is achieved by using the multi‐component information in the VSP data leading to reduce uncertainties in data interpretation. We performed a routine data interpretation on these images and developed a new attribute titled ‘Centroid Frequency Ratio of PSv and PP Waves’ for indication of the tight gas sands. The results demonstrated that the new attribute was sensitive to this type of reservoir. By combining geologic, drilling and log data, a comprehensive evaluation based on the 3D VSP data was conducted and a new well location for drilling was proposed. The major results in this paper tell us that successful application of 3D‐3C VSP technologies are only accomplished through a synthesis of many disciplines. We need detailed analysis to evaluate each step in planning, acquisition, processing and interpretation to achieve our objectives. High resolution, successful processing of multi‐component information, combination of PP and PSv volumes to extract useful attributes, receiver depth information and offset/ azimuth‐dependent anisotropy in the 3D VSP data are the major accomplishments derived from our attention to detail in the above steps. 相似文献
20.
在地震勘探中,描述复杂介质的正演和反演问题通常包含许多反映介质不同特性的参数.同时获得这些参数对进行更准确的岩性描述和油藏预测具有重要的理论和现实意义.为了提高频率域黏弹性波动方程的零偏VSP多参数反演的精度,本文对多参数反演的可行性进行分析,明确了目标函数的敏感程度及参数之间的耦合情况,提出了一种基于走时约束的分频分步多参数反演策略.首先利用零偏VSP资料构建先验信息,然后分别利用高、低频数据进行两步反演,也就是"三个参数反演+五个参数反演"的过程,以提高反演的稳健性和精度.利用此方法可同时得到零偏VSP数据可靠的弹性波速度、密度和品质因子,为精确的时-深关系及含油气的解释和预测奠定基础,同时也可以为地面地震叠前反演提供可靠有效的约束,增强地面地震反演精度. 相似文献