首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 875 毫秒
1.
东海微板块的南北分块与水平运动   总被引：2，自引：2，他引：0  
前晚白垩世,闽浙-朝鲜二古沟-弧系和琉球沟-弧系组成古双俯冲带,东海微板块的构造运动受制于双俯冲带的作用.东海微板块基底和琉球岛弧的南北三分态势,是由于西侧二古为-弧系的不同区段对物质和应力的消减作用存在非均一性,从而在双俯冲带的作用下,导致东海地壳水平运动作差异性调整,而由此产生的NW向断裂分割的结果.  相似文献   

2.
马尼拉海沟几何形态特征的构造演化意义   总被引：4，自引：0，他引：4  
通过对马尼拉海沟海底地形地貌、构造特征及其相关地震等数据资料的分析,结合俯冲带动力学数值模拟成果,尤其是Schellart等的模式,详细讨论了马尼拉海沟几何形态、海沟南北段俯冲角度突变等构造特征。分析认为,南海中代表古扩张脊的黄岩海山链的俯冲挤入对马尼拉俯冲带的几何形态没有造成较大的影响,其几何形态较符合中等长度(2000～3000km)的海沟模型。由海沟后退和板片反转引起的平行于马尼拉海沟方向的地幔流加剧了海沟南北段俯冲角度的突变。  相似文献   

3.
A Seabeam reconnaissance of 1200 km of the deep sediment-starved axis of Tonga Trench delineated the fine-scale relief at the outcrop of a subduction zone generally characterized by tectonic erosion rather than accretion. The commonest axial cross-section has a steep (12°) irregular inner slope intersecting the thinly sedimented surface of Mesozoic ocean crust, which dips under it at 5–6°. There is little or no intervening turbidite fill, but small lenses interpreted as debris deposits occur at the foot of parts of the inner slope that lack basins or benches which elsewhere obstruct downslope sediment transport. The oceanic slope is severely broken by parallel but slightly sinuous fractures induced by bending of the plate, and entry of outer-slope grabens into the subduction zone is confirmed to be a morphologically and tectonically important process. Arrival of oceanic seamounts and volcanic ridges at the trench outer slope and axis affects the fracture pattern of the oceanic plate, the depth of the temporarily plugged axis, and the relief of the lower inner slope. Subduction of the Louisville guyot chain, or of the extensive hotspot swell and thick sediment apron that surrounds it, has important regional effects as well, shoaling 400 km of trench axis and causing development of a small accretionary prism with trench-slope basins. Because the intersection point of the hot-spot chain has moved rapidly south along the trench, structural changes that occur in the wake of guyot-chain subduction can also be inferred: accretion at the inner slope is followed by rapid tectonic erosion, which unroofs a wider strip of downgoing lithosphere and thereby deepens the trench axis. The longitudinal profile of axial depths, made locally irregular by the collision of medium-scale volcanic and tectonic relief on the oceanic plate, also has a step near 18.5° S, where there is a regional depth difference in the oceanic crust entering the trench.  相似文献   

4.
We present major and trace element data of lava recovered from the northern Yap Trench in the western Pacific and discuss their petrogenesis and tectonic implications within the framework of interactions between the Caroline Ridge and Yap Trench. Rocks were collected from both landward and seaward trench slopes and exhibited geochemical characteristics similar to backarc basin basalt (BABB) and mid-ocean ridge basalt (MORB), including high Fe content, tholeiitic affinity, high TiO2 value at a given FeOT/MgO ratio, Ti/V ratio between 20 and 50, low Ba/Nb ratio and Th/Nb ratio, and trace element patterns commonly displayed by BABB and MORB, which are distinct from arc lava. These rocks seem to have been generated during mantle upwelling and decompression melting at a spreading center. However, compared with typical forearc lava produced by seafloor spreading in the Mariana forearc region, such as the early Eocene forearc basalts and late Neogene forearc lava in the southernmost Mariana Trench, the Yap Trench lava is derived from a more fertile mantle and feature a more minor subduction component; thus, they cannot be the products of forearc mantle decompression melting. We suggest that the landward slope lava represents backarc basin crust that was overthrust onto the forearc lithosphere during the collision of the Caroline Ridge with the Yap Trench (20–25 Ma), which played a key role in the evolution of the Yap subduction system. Moreover, the seaward slope lava represents the subduction plate crust that accreted onto the deep trench during the collision. This collision event resulted in the cessation of Yap Arc magmatism; thus, the Yap Trench volcanic rocks (<25 Ma) previously suggested to be arc magma products may actually represent the nascent island arc lava with a lower subduction component than in the mature Mariana Arc lava.  相似文献   

5.
The western New Britain Trench contains relatively thin sediment fill in the east, compared to the west where a sequence of thick turbidites is ponded behind a basement high in the trench axis, The trench trends toward Huon Gulf, but intersects the Trobriand Trench at an acute angle at the 149° Embayment, where both trenches end. Seismic structure west of the trench is incoherent, related to incipient collision of the Indian-Australia Plate and the South Bismarck Plate. The collision suture is marked by the Markham Canyon, continuous in its upper reaches with the Ramu-Markham Fault Zone on shore.  相似文献   

6.
Morphology and tectonics of the Yap Trench   总被引：5，自引：0，他引：5  
We conducted swath bathymetry and gravity surveys the whole-length of the Yap Trench, lying on the southeastern boundary of the Philippine Sea Plate. These surveys provided a detailed morphology and substantial insight into the tectonics of this area subsequent the Caroline Ridge colliding with this trench. Horst and graben structures and other indications of normal faulting were observed in the sea-ward trench seafloor, suggesting bending of the subducting oceanic plate. Major two slope breaks were commonly observed in the arc-ward trench slope. The origin of these slope breaks is thought to be thrust faults and lithological boundaries. No flat lying layered sediments were found in the trench axis. These morphological characteristics suggest that the trench is tectonically active and that subduction is presently occurring. Negative peaks of Bouguer anomalies were observed over the arc-ward trench slope. This indicates that the crust is thickest beneath the arc-ward trench slope because the crustal layers on the convergent two plates overlap. Bouguer gravity anomalies over the northern portion of the Yap Arc are positive. These gravity signals show that the Yap Arc is uplifted by dynamic force, even though dense crustal layers underlie the arc. This overlying high density arc possibly forces the trench to have great water depths of nearly 9000 m. We propose a tectonic evolution of the trench. Subduction along the Yap Trench has continued with very slow rates of convergence, although the cessation of volcanism at the Yap Arc was contemporaneous with collision of the Caroline Ridge. The Yap Trench migrated westward with respect to the Philippine Sea Plate after collision, then consumption of the volcanic arc crust occurred, caused by tectonic erosion, and the distance between the arc and the trench consequently narrowed. Lower crustal sections of the Philippine Sea Plate were exposed on the arc-ward trench slope by overthrusting. Intense shearing caused deformation of the accumulated rocks, resulting in their metamorphism in the Yap Arc.  相似文献   

7.
The southern end of the Shackleton Fracture Zone is subducted below the South Shetland forearc, while the basal detachment of the forearc continues eastward of the Shackleton ridge as a thrust fault. The western boundary between the Antarctic/Scotia plates is located at the eastern margin of the Shackleton ridge, where an elongated depositional basin and a morphological trough delineates the contact. The boundary of the Antarctic/Scotia plates and the South Shetland forearc form a triple junction at the intersection of the Shackleton Fracture Zone with the trench, between these two plates, and an independent South Shetland block.  相似文献   

8.
Aruba, Bonaire, and Curaçao are islands aligned along the crest of a 200-km-long segment of the east-west-trending Leeward Antilles ridge within the broad Caribbean-South America plate boundary zone presently characterized by east-west, right-lateral strike-slip motion. The crust of the Leeward Antilles ridge represents the western segment of the Cretaceous-early Cenozoic Great Arc of the Caribbean, which obliquely collided, with the continental margin of northern South America in early Cenozoic time. Following the collision, the ridge was affected by folding and was segmented by oblique, northwest-striking normal faults that have produced steep-sided, northwest-trending, elongate islands and narrow shelves separated by deepwater, sediment-filled and fault-controlled basins. In this paper, we present the first fault slip observations on the Neogene carbonate rocks that cover large areas of all three islands. Our main objective is to quantify the timing and nature of Neogene to Quaternary phases of faulting and folding that have affected the structure and topography of this area including offshore sedimentary basins that are being explored for their petroleum potential. These data constrain three fault phases that have affected Aruba, Bonaire, and Curaçao and likely the adjacent offshore areas: 1) NW-SE-directed late Paleogene compression; 2) middle Miocene syndepositional NNW-SSE to NNE-SSW extension that produced deep rift basins transverse to the east-west-trending Leeward Antilles ridge; and 3) Pliocene-Quaternary NNE-trending compression that produced NW-SE-trending anticlines present on Aruba, Curaçao and Bonaire islands. Our new observations - that include detailed relationships between striated fault planes, paleostress tensors, and bedding planes - show that prominent bedding dips of Neogene limestone on Aruba, Bonaire and Curaçao were produced by regional tectonic shortening across the entire Leeward Antilles ridge rather than by localized, syndepositional effects as proposed by previous workers. We interpret Pliocene-Quaternary NNE-directed shortening effects on the Leeward Antilles ridge as the result of northeastward extrusion or “tectonic escape” of continental areas of western Venezuela combined with southeastward shallow subduction of the Caribbean plate beneath the ridge.  相似文献   

9.
Most of the basins developed in the continental core of SE Asia (Sundaland) evolved since the Late Cretaceous in a manner that may be correlated to the conditions of the subduction in the Sunda Trench. By the end of Mesozoic times Sundaland was an elevated area composed of granite and metamorphic basement on the rims; which suffered collapse and incipient extension, whereas the central part was stable. This promontory was surrounded by a large subduction zone, except in the north and was a free boundary in the Early Cenozoic. Starting from the Palaeogene and following fractures initiated during the India Eurasia collision, rifting began along large faults (mostly N–S and NNW–SSE strike-slip), which crosscut the whole region. The basins remained in a continental fluvio-lacustrine or shallow marine environment for a long time and some are marked by extremely stretched crust (Phu Khanh, Natuna, N. Makassar) or even reached the ocean floor spreading stage (Celebes, Flores). Western Sundaland was a combination of basin opening and strike-slip transpressional deformation. The configuration suggests a free boundary particularly to the east (trench pull associated with the Proto-South China Sea subduction; Java–Sulawesi trench subduction rollback). In the Early Miocene, Australian blocks reached the Sunda subduction zone and imposed local shortening in the south and southeast, whereas the western part was free from compression after the Indian continent had moved away to the north. This suggests an important coupling of the Sunda Plate with the Indo-Australian Plate both to SE and NW, possibly further west rollback had ceased in the Java–Sumatra subduction zone, and compressional stress was being transferred northwards across the plate boundary. The internal compression is expressed to the south by shortening which is transmitted as far as the Malay basin. In the Late Miocene, most of the Sunda Plate was under compression, except the tectonically isolated Andaman Sea and the Damar basins. In the Pliocene, collision north of Australia propagated toward the north and west causing subduction reversal and compression in the short-lived Damar Basin. Docking of the Philippine Plate confined the eastern side of Sundaland and created local compression and uplift such as in NW Borneo, Palawan and Taiwan. Transpressional deformation created extensive folding, strike-slip faulting and uplift of the Central Basin and Arakan Yoma in Myanmar. Minor inversion affected many Thailand rift basins. All the other basins record subsidence. The uplift is responsible for gravity tectonics where thick sediments were accumulated (Sarawak, NE Luconia, Bangladesh wedge).  相似文献   

10.
Active faults at a range in scales are observed in different directions (E-W, N-S and NE-SW) in the extensional tectonic regime of the Aegean region, western Turkey. However, mechanisms and types of faults in the Gulf of Izmir have not been investigated properly. Tectonic setting in the gulf together with the origin and characteristics of faults were studied in this study by integrating interpretation from various very high resolution acoustic data (multibeam bathymetry and CHIRP very high resolution seismic) acquired in the Gulf of Izmir.The Gulf of Izmir has thick, unconsolidated, stratified sediment cover. The water depth increases from the inner part (SE) to the outer part (NW) of the gulf with complex sea floor morphology. However, northeastern part of the coastal region is very shallow because of the sedimentary influx transported by the Gediz River. The western margin and the southern part of the gulf were formed under the influence of Uzunada (Uzun Island) and Izmir Faults, respectively. In the southern offshore, there is only one, E-W directional normal fault dipping through the north and corresponding to the offshore segment of the Izmir Fault Zone to the west. The acoustic data enable identification of the Uzunada Fault Zone extending as a simple lineament from near Guzelbahce in the south but bifurcating toward the NE of the Cicek Archipelago and terminating with left-lateral slip in the E-NE of the Hekim Island. After the sinistral strike-slip, the fault re-extends in the NW direction untill the mid of Uzunada as a single fault segment. Then, the fault is observed as a bunch of many active fault segments (like horse-tail splays) to the east of Uzunada with N-NW elongation through the outer gulf. These segments were chronologically succeeded from the east to the west. This progradational pattern is attributed to westward extension of the Gulf of Izmir with anti-clockwise rotational escape of the Anatolian Plate. In addition, progradation of faults was controlled by the NE-SW directional tear faults which may have played a key role in the shoreline extension and general pattern of the outer gulf islands. A very young graben in the central part of the gulf, also dislocated by the tear faults was observed parallel to the Uzunada Fault Zone as another indicator of ongoing fan-shaped opening of the gulf. These tectonic elements are consistent with earlier interpretation of GPS-based observations indicating a four-wheel gear system of rigid-body rotations. Additionally, a new fault extending from the far offshore of Foca to Suzbeyli village to the south was identified in this study. Its NW-SE extension is angular to the previous tectonic elements. All these elements apparently project at least 10 km farther northward, in the offshore Foca where the earthquake epicenters cluster.  相似文献   

11.
The Seram Trough is located in the northern part of the Banda Arc-Australian collision zone in eastern Indonesia and is currently the site of contraction between the Bird's Head of New Guinea and Seram Island. It has been interpreted as a subduction trench, an intra-continental thrust zone and foredeep, and a zone of strike-slip faulting. Recently acquired 2D seismic lines clarify its tectonic evolution and relationship to the Bird's Head. Folding in the Early Pliocene formed an anticlinorium running from Misool to the Onin Peninsula of Irian Jaya and produced a newly recognised angular unconformity. The unconformity truncates sediments as old as Middle Jurassic and is an ancient topographic surface with significant relief. It was later folded and now dips south towards the trough where it is covered by up to 3 km of sediments. Initial tilting of the unconformity surface was accompanied by deposition of a transgressive sequence which can be traced into the trough. This is overlain by two sequences which prograde towards the trough. These sequences show progressive rotation of the unconformity surface, gravitational displacement of sediments into the trough, and thrusting which continues to the present day. Contraction occurred in the trough after the Early Pliocene and is younger than the previously suggested Late Miocene age. Thrust faults in the trough deform sediments deposited above the unconformity and detach at the unconformity surface. On Seram thrust faults repeat Mesozoic–Miocene sequences and probably detach at their contact with metamorphic basement. The detachment surface must cut through the Mesozoic-Miocene sequence between Seram and the trough. This work suggests the Seram Trough is not a subduction trench but a foredeep produced in response to loading by the developing fold and thrust belt of Seram, with an associated peripheral bulge to the north. The Seram Trough is interpreted to be a very young zone of thrusting within the Australian continental margin.  相似文献   

12.
在对冲绳海槽及邻区构造地质学和热液地质学调查研究成果进行全面总结的基础上,将深部地球动力学机制、冲绳海槽形成演化、岩浆作用过程、热液系统结构、流体循环模式和成矿作用特征等多方面的问题,纳入到统一的框架下,探讨了冲绳海槽构造地质过程对热液活动和成矿作用的控制机理。分析认为,区域中尺度地幔流引起了东亚大陆边缘岩石圈向东的蠕散,并驱动了菲律宾海板块沿琉球海沟向欧亚板块之下的俯冲。在弧后小尺度地幔对流、岩石圈减薄、板片反卷和俯冲后退的共同作用下,冲绳海槽发生弧后张裂。张裂作用在岩石圈内形成了网状破裂系统,为岛弧和弧后岩浆上涌提供了通道,并且引起了不同来源岩浆的干扰和混合。侵位到地壳浅部的岩浆为热液活动提供了热源和主要成矿物质来源,是影响热液活动分布的主要因素。沉积层覆盖改变了流体的浅部循环结构和原始流体成分。热液区内普遍存在的流体相分离过程,导致了广域成矿作用的发生。  相似文献   

13.
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting.  相似文献   

14.
Located between the Okinawa trough (OT) backarc basin and the collisional zone in Taiwan, the southernmost Ryukyu subduction zone is investigated. This area, including the southwestern portions of the OT and Ryukyu island arc (RA) and located west of 123.5° E, is named the Taiwan-Ryukyu fault zone (TRFZ). West of 123.5° E, the OT displays NNW-SSE structural trends which are different in direction from the ENE-WSW trending pattern of the rest of the OT. Using joint analysis of bathymetric, magnetic, gravity and earthquake data, three major discontinuities, that we interpret as right-lateral strike-slip faults (Faults A, B and C), have been identified. These faults could represent major decouplings in the southern portion of the Ryukyu subduction zone: each decoupling results in a decrease of the horizontal stress on the portion of the RA located on the eastern side of the corresponding fault, which allows the extension of the eastern side of OT to proceed more freely.We demonstrate that the 30° clockwise bending of the southwestern RA and the consecutive faulting in the TRFZ are mainly due to the collision of the Luzon arc with the former RA. After the formation of Fault C, the counterclockwise rotated portion of the ancient RA located west of the Luzon arc was more parallel to the Luzon arc. This configuration should have increased the contact surface and friction between the Luzon arc and the ancient RA, which could have reduced the northward subduction of the Luzon are. Thus, the westward component of the compressive stress from the collision of the Luzon arc should become predominant in the collisional system resulting in the uplift of Taiwan. Presently, because the most active collision of the Luzon arc has migrated to the central Taiwan (at about 23° N; 121.2° E), the southwestern OT has resumed its extension. In addition, the later resistent subduction of the Gagua ridge could have reactivated the pre-existing faults A and B at 1 M.y. ago and present, respectively. From 9 to 4 M.y., a large portion of the Gagua ridge probably collided with the southwestern RA. Because of its large buoyancy, this portion of the ridge resisted to subduct beneath the Okinawa platelet. As a result, we suggest that a large exotic terrane, named the Gagua terrane, was emplaced on the inner side of the present Ryukyu trench. Since that period, the southwestern portion of the Ryukyu trench was segmented into two parallel branches separated by the Gagua ridge: the eastern segment propagated westward along the trench axis while the western segment of the trench retreated along the trench axis.  相似文献   

15.
Fault patterns at outer trench walls   总被引：1，自引：0，他引：1  
Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.  相似文献   

16.
New (2009) multi-beam bathymetric and previously published seismic reflection data from the NE-SW-oriented Fethiye Bay and the neighboring N-S-oriented Marmaris Bay off SW Anatolia were evaluated in order to interpret the seafloor morphology in terms of the currently still active regional tectonic setting. This area lies between the Pliny Trench, which constitutes the eastern sector of the subduction zone between the African and Eurasian plates in the Eastern Mediterranean, and the Fethiye-Burdur Fault Zone of the Anatolian Plate. The bathymetric data document the very narrow shelf of the Anatolian coast, a submarine plain between the island of Rhodes and Marmaris Bay, and a large canyon connecting the abyssal floor of the Rhodes Basin with Fethiye Bay. The latter are here referred to as the Marmaris Plain and Fethiye Canyon, respectively. Several active and inactive faults have been identified. Inactive faults (faults f1) delineate a buried basin beneath the Marmaris Plain, here referred to as the Marmaris Basin. Other faults that affect all stratigraphic units are interpreted as being active. Of these, the NE-SW-oriented Marmaris Fault Zone located on the Marmaris Plain is interpreted as a transtensional fault zone in the seismic and bathymetric data. The transtensional character of this fault zone and associated normal faults (faults f3) on the Marmaris Plain correlates well with the Fethiye-Burdur Fault Zone on land. Another important fault zone (f4) occurs along the Fethiye Canyon, forming the northeastern extension of the Pliny Trench. The transpressional character of faults f4 inferred from the seismic data is well correlated with the compressional structures along the Pliny Trench in the Rhodes Basin and its vicinity. These observations suggest that the Marmaris Fault Zone and faults f3 have evolved independently of faults f4. The evidence for this missing link between the Pliny Trench and the Fethiye-Burdur Fault Zone implies possible kinematic problems in this tectonic zone that deserve further detailed studies. Notably, several active channels and submarine landslides interpreted as having been triggered by ongoing faulting attest to substantial present-day sediment transport from the coast into the Rhodes Basin.  相似文献   

17.
Located at the intersection between a NW-trending slip system and NE-trending rift system in the northern South China Sea, the Qiongdongnan Basin provides key clues for us to understand the proposed extrusion of the Indochina Block along with Red River Fault Zone and extensional margins. In this paper we for the first time systematically reveal the striking structural differences between the western and eastern sector of the Qiongdongnan Basin. Influenced by the NW-trending slip faults, the western Qiongdongnan Basin developed E–W-trending faults, and was subsequently inverted at 30–21 Ma. The eastern sector was dominated by faults with NE orientation before 30 Ma, and thereafter with various orientations from NE, to EW and NW during the period 30–21 Ma; rifting display composite symmetric graben instead of the composite half graben or asymmetric graben in the west. The deep and thermal structures in turn are invoked to account for such deformation differences. The lithosphere of the eastern Qiongdongnan Basin is very hot and thinned because of mantle upwelling and heating, composite symmetric grabens formed and the faults varied with the basal plate boundary. However, the Southern and Northern Uplift area and middle of the central depression is located on normal lithosphere and formed half grabens or simple grabens. The lithosphere in the western sector is transitional from very hot to normal. Eventually, the Paleogene tectonic development of the Qiongdongnan Basin may be summarized into three stages with dominating influences, the retreat of the West Pacific subduction zone (44–36 Ma), slow Indochina block extrusion together with slab-pull of the Proto-South China Sea (36–30 Ma), rapid Indochina block extrusion together with the South China Sea seafloor spreading (30–21 Ma).  相似文献   

18.
西太平洋中部地区是西太平洋板块边缘沟-弧-盆体系构造演化的关键区域,其地质特征与构造演化一直是地学家关注的焦点问题之一。开展岩石圈有效弹性厚度的研究对于认识该区域的形成演化具有重要的科学意义。本文采用滑动窗口导纳技术,并在挠曲模型中考虑了表面荷载和内部荷载同时存在的情况,计算得到该区域的岩石圈有效弹性厚度(Te)。计算结果显示,研究区的Te值整体上为0~50 km,其变化基本上与构造单元相吻合,且与主要的构造边界密切相关。除海底火山具有相对较小的Te值(15~20 km)外,太平洋板块整体上具有较强的岩石圈强度(25~30 km)。马里亚纳海沟和菲律宾海沟的岩石圈强度从外隆起到海沟方向表现为明显的减弱,表明岩石圈由外隆起向海沟发生了弱化。帕里西维拉海盆西部相较于东部具有较弱的岩石圈强度,这可能与海盆的非对称扩张有关。卡罗琳板块的岩石圈整体上表现为相对均一的低Te值特征(<15 km)。欧里皮克海隆、卡罗琳海岭和索罗尔海槽的Te值为3 km,这可能是强烈的火山作用所导致的结果。  相似文献   

19.
Mitre Island samples, Pliocene in age, can be classified together with Anuda samples, of unknown age, as island-arc basaltic andesites with tholeiitic tendencies. The presence of morphologically unusual iron—titanium oxides and of probably xenocrystic plagioclase suggest that at least part of the observed minerals crystallized in a magma chamber underlying the island. The samples apparently represent a mixture of magma fluid, cumulate plagioclase, pyroxene, and iron—titanium oxides which were ponded in a crater lava lake where they were reheated by subsequent eruptions. Many of them show symplectic magnetite formed by high-temperature oxidation of olivine. The morphological complexity and compositional homogeneity of the iron—titanium oxides cannot be explained at present.The presence of sulfide droplets inside olivine, magnetite and ilmenite crystals suggests a formation of an immiscible sulfide liquid in the magma chamber. Droplets of this liquid were overgrown by minerals crystallizing at that time and thus protected against oxidation during and after eruption.Mitre Island is a part of a currently inactive Vitiaz island arc associated in the past with a westward subduction of Pacific plate along the Vitiaz trench. Increased difficulty in subducting the large mass of the Pacific Border Plateau under the northern Fiji Plateau apparently produced counterclockwise rotation of the Vitiaz island arc. Oblique subduction was active until a steep angle was reached between the Vitiaz trench and the motion vector of the Pacific plate. Then a strike-slip fault developed in the Vitiaz trench and the subducted plate was sheared off. Recently the strike-slip zone migrated south from the Vitiaz trench across the northern Fiji Plateau and is presently extending from Aoba Island, in the New Hebrides, northeastward toward the Pacific Border Plateau.  相似文献   

20.
Quantitative tectonic modelling demonstrates an interaction of flexure of the lithosphere underlying the western Betics with crustal thinning in the Alboran Basin and flank uplift in the Internal Zone. In the eastern Betics the flexural response is overprinted by post-thrusting extensional events. Lateral variations in thermal structure and rheology of the lithosphere along strike of the Betics shed light on changes in tectonic configuration and are consistent with evidence for lateral variations in the mode of extension in the Alboran Basin. Flexural modelling and subsidence analysis of Neogene basins in the Internal Zone of the Betics, with spatial development controlled by contrasts in lithosphere rheology, demonstrate that at least two extensional events have affected the orogenic evolution of the Betics. The first event appears to reflect Oligocene-Early Miocene rifting observed throughout the Western Mediterranean. The second phase, which caused the present configuration of the Betics, corresponds to Tortonian-Recent extension centered in the Alboran Basin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号