首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Beginning of melting and subsolidus relationships in the system K2O-CaO-Al2O3-SiO2-H2O have been experimentally investigated at pressures up to 20 kbars. The equilibria discussed involve the phases anorthite, sanidine, zoisite, muscovite, quartz, kyanite, gas, and melt and two invariant points: Point [Ky] with the phases An, Or, Zo, Ms, Qz, Vapor, and Melt; point [Or] with An, Zo, Ms, Ky, Qz, Vapor, and Melt.The invariant point [Ky] at 675° C and 8.7 kbars marks the lowest solidus temperature of the system investigated. At pressures above this point the hydrated phases zoisite and muscovite are liquidus phases and the solidus temperatures increase with increasing pressure. At 20 kbars beginning of melting occurs at 740 °C. The solidus temperatures of the quinary system K2O-CaO-Al2O3-SiO2-H2O are almost 60° C (at 20 kbars) and 170° C (at 2kbars) below those of the limiting quaternary system CaO-Al2O3-SiO2-H2O.The maximum water pressure at which anorthite is stable is lowered from 14 to 8.7 kbars in the presence of sanidine. The stability limits of anorthite+ vapor and anorthite+sanidine+vapor at temperatures below 700° C are almost parallel and do not intersect. In the wide temperature — pressure range at pressures above the reaction An+Or+Vapor = Zo+Ms+Qz and temperatures below the melting curve of Zo+Ms+Ky+Qz+Vapor, the feldspar assemblage anorthite+sanidine is replaced by the hydrated phases zoisite and muscovite plus quartz. CaO-Al2O3-SiO2-H2O. Knowledge of the melting relationships involving the minerals zoisite and muscovite contributes to our understanding of the melting processes occuring in the deeper parts of the crust. Beginning of melting in granites and granodiorites depends on the composition of plagioclase. The solidus temperatures of all granites and granodiorites containing plagioclases of intermediate composition are higher than those of the Ca-free alkali feldspar granite system and below those of the Na-free system discussed in this paper.The investigated system also provides information about the width of the P-T field in which zoisite can be stable together with an Al2SiO5 polymorph plus quartz and in which zoisite plus muscovite and quartz can be formed at the expense of anorthite and potassium feldspar. Addition of sodium will shift the boundaries of these fields to higher pressures (at given temperatures), because the pressure stability of albite is almost 10kbars above that of anorthite. Assemblages with zoisite+muscovite or zoisite+kyanite are often considered to be products of secondary or retrograde reactions. The P-T range in which hydration of granitic compositions may occur in nature is of special interest. The present paper documents the highest temperatures at which this hydration can occur in the earth's crust.  相似文献   

2.
Margarite is both abundant and widespread throughout a sequence of interstratified amphibolite, hornblendite, and metamorphosed anorthosite from the upper Lyvia River, central Fiordland. These rock types comprise part of a metamorphosed layered intrusion. Assemblages recorded from these rocks are the product of two distinct phases of metamorphism. First generation assemblages typically comprise plagioclase (An84–96), hornblende, kyanite, and minor corundum. Clinozoisite and chlorite occur as late stage breakdown products of plagioclase and hornblende. Margarite developed during the second phase of metamorphism.Within the corundum-bearing rocks replacement of corundum or plagioclase by margarite can be observed directly. On the basis of these observations the following reaction is evident: 1 corundum+1 anorthite+1H2O=1 margarite.In other assemblages the formation of margarite can be attributed to the breakdown of kyanite and clinozoisite according to the reaction: 2 kyanite+2 clinozoisite=1 margarite+3 anorthite.Margarite is found, however, to contain appreciable amounts of paragonite solid-solution (up to 28 mol%) and plagioclase produced (second generation) is not pure anorthite but of intermediate compositions (An46–62). The reaction therefore involves the introduction of both soda and silica. Margarite also crystallized independently of clinozoisite according to a reaction of the general form: 5 pargasite+17 kyanite+19 H2O =8 margarite+4 chlorite+7 plagioclase.Application of available experimental data suggests that the margarite formed between 550 and 720 ° C up to a maximum pressure of 9.5 kb. Whereas the involvement of albite component (second generation plagioclase) will tend to lower the temperatures and pressures necessary for the occurrence of margarite, this effect is partially offset by the significant amounts of paragonite end-member held within the margarite. An independent estimate of the metamorphic conditions in metapelites suggests that the introduction of albite lowers equilibration temperatures by about 2 ° C for every 1% albite.  相似文献   

3.
Abstract Microprobe analyses of feldspars in granite mylonites containing flame perthite give compositions that invariably plot as three distinct clusters on a ternary feldspar diagram: orthoclase (Or92–97), albite and oligoclase-andesine. The albite occurs as grains in the matrix, as flame-shaped lamellae in orthoclase, and in patches within plagioclase grains. We present a metamorphic model for albite flame growth in the K-feldspar in these rocks that is related to reactions in plagioclase, rather than alkali feldspar exsolution. Flame growth is attributed to replacement and results from a combination of two retrograde reactions and one exchange reaction under greenschist facies conditions. Reaction 1 is a continuous or discontinuous (across the peristerite solvus) reaction in plagioclase, in which the An component forms epidote or zoisite. Most of the albite component liberated by Reaction 1 stays to form albite in the host plagioclase, but some Na migrates to form the flames within the K-feldspar. Reaction 2 is the exchange of K for Na in K-feldspar. Reaction 3 is the retrograde formation of muscovite (as ‘sericite’) and has all of the chemical components of a hydration reaction of K-feldspar. The Si and Al made available in the plagioclase from Reaction 1 are combined with the K liberated from the K-feldspar, to produce muscovite in Reaction 3. The muscovite forms in the plagioclase, rather than the K-feldspar, as a result of the greater mobility of K relative to Al. The composition of the albite flames is controlled by both the peristerite and the alkali feldspar miscibility gaps and depends on the position of these solvi at the pressure and temperature that existed during the reaction. Using an initial plagioclase composition of An20, the total reaction can be summarized as: 20 oligoclase + 1 K-feldspar + 2 H2O = 2 zoisite + muscovite + 2 quartz + 15 albiteplagioclase+ 1 albiteflame. This model does not require that any additional feldspar framework be accreted at replacement sites: Na and K are the only components that must migrate a significant distance (e.g. from one grain to the next), allowing Al to remain within the altering plagioclase grain. The resulting saussuritization is isovolumetric. The temperature and extent of replacement depends on when, and how much, water infiltrates the rock. The fugacity of the water, and therefore the pressure of the fluid, may have been significantly lower than lithostatic during flame growth.  相似文献   

4.
The beginning of melting in the system Qz-Or-Ab-An-H2 O was experimentally reversed in the pressure range kbar using starting materials made up of mixtures of quartz and synthetic feldspars. With increasing pressure the melting temperature decreases from 690° C at 2 kbar to 630° C at 17 kbar in the An-free alkalifeldspar granite system Qz-Or-Ab-H2O. In the granite system Qz-Or-Ab-An-H2O the increase of the solidus temperature with increasing An-content is only very small. In comparison to the alkalifeldspar granite system the solidus temperature increases by 3° C (7° C) if albite is replaced by plagioclase An 20 (An 40). The difference between the solidus temperatures of the alkalifeldspar granite system and of quartz — anorthite — sanidine assemblages (system Qz-Or-An-H2O) is approximately 50° C. With increasing water pressures plagioclase and plagioclase-alkalifeldspar assemblages become unstable and are replaced by zoisite+kyanite+quartz and zoisite+muscovite-paragonitess +quartz, respectively. The pressure stability limits of these assemblages are found to lie between 6 and 16 kbar at 600° C. At high water pressures (10–18 kbar) zoisite — muscovite — quartz assemblages are stable up to 700 and 720° C. The solidus curve of this assemblage is 10–20° C above the beginning of melting of sanidine — zoisite — muscovite — quartz mixtures. The amount of water necessary to produce sufficient amounts of melt to change a metamorphic rock into a magmatic looking one is only small. In case of layered migmatites it is shown that 1 % of water (or even less) is sufficient to transform portions of a gneiss into (magmatic looking) leucosomes. High grade metamorphic rocks were probably relatively dry, and anatectic magmas of granitic or granodioritic composition are usually not saturated with water.  相似文献   

5.
Evan R. Phillips 《Lithos》1974,7(3):181-194
Myrmekite, first detected by Michel-Lévy in 1875 and named by Sederholm in 1899, is an intergrowth between vermicular quartz and (sodic) plagioclase situated next to potash feldspar. In felsic plutonic rocks it occurs as: rims bordering granular plagioclase, intergranular blebs set between adjacent microperthite crystals, lobes associated with muscovite in deformed alkali feldspar megacrysts or as bulbous growths at their margins, and rims on plagioclase inclusions held within orthocalse megacrysts. A literature review based largely on papers published in the past quarter century shows that hypotheses for myrmekite genesis fall mainly into five categories: simultaneous or direct crystallization, replacement of potash feldspar by plagioclase, replacement of plagioclase by potash feldspar, solid-state exsolution, and recrystallizing quartz involved with blastic plagioclase.  相似文献   

6.
西藏普兰地幔橄榄岩中尖晶石内的钙长石包裹体及其成因   总被引：6，自引：5，他引：1  
郭国林  徐向珍  李金阳 《岩石学报》2011,27(11):3197-3206
西藏普兰超镁铁岩体之东南缘与玄武岩接触界线附近的地幔橄榄岩中除有粒状半自形的钙长石产出外,还在尖晶石中发现有呈蠕虫状、浑圆状的钙长石包裹体存在.研究发现两种产状的钙长石An值都大于95且均无环带构造,说明钙长石从高Ca/Al比值的熔体中结晶时具有结晶时间短、结晶速度快的特点,可能形成于地壳较浅部位.从化学成分来看,包裹体形态的钙长石具有较高的Cr2O3含量,其寄主矿物尖晶石的Cr#值低且TiO2含量比深海橄榄岩中的尖晶石低得多,推断钙长石包裹体与寄主矿物尖晶石是在液相条件下几乎同时结晶的产物.综合研究表明钙长石包裹体的成因可能是玄武岩熔体在地壳较浅部位侵入方辉橄榄岩时,高温的玄武质熔体提供热源,使得方辉橄榄岩中尖晶石内的Cpx+ Opx细粒矿物包裹体在高温环境下发生熔融,发生Opx+ Cpx+ Sp→Ol+ Pl的反应,由于这种情况下尖晶石有剩余,故新生成的橄榄石和钙长石矿物仍然包裹于尖晶石内,从而形成尖晶石内部呈蠕虫状的钙长石包裹体.  相似文献   

7.
The Motuo area is located in the east of the Eastern Himalayan Syntaxis. There outcrops a sequence of high-grade metamorphic rocks, such as metapelites. Petrology and mineralogy data suggest that these rocks have experienced three stages of metamorphism. The prograde metamorphic mineral assemblages(M1) are mineral inclusions(biotite + plagioclase + quartz ± sillimanite ± Fe-Ti oxides) preserved in garnet porphyroblasts, and the peak metamorphic assemblages(M2) are represented by garnet with the lowest XSps values and the lowest XFe# ratios and the matrix minerals(plagioclase + quartz ± Kfeldspar + biotite + muscovite + kyanite ± sillimanite), whereas the retrograde assemblages(M3) are composed of biotite + plagioclase + quartz symplectites rimming the garnet porphyroblasts. Thermobarometric computation shows that the metamorphic conditions are 562–714°C at 7.3–7.4 kbar for the M1 stage, 661–800°C at 9.4–11.6 kbar for the M2 stage, and 579–713°C at 5.5–6.6 kbar for the M3 stage. These rocks are deciphered to have undergone metamorphism characterized by clockwise P-T paths involving nearly isothermal decompression(ITD) segments, which is inferred to be related to the collision of the India and Eurasia plates.  相似文献   

8.
Melting relationships in the system K2O-CaO-Al2O3-SiO2-H2O have been reinvestigated using Schreinemakers analysis and hydrothermal experiments. The reaction sanidine+muscovite+zoisite+quartz+vapor =melt has been bracketed at 10, 15, and 20 kbars and 670–680, 680–690, and 690–700° C, respectively and it marks the lowest solidus temperatures in the system investigated.Below 10 kbars, experimental data on the beginning of melting in zoisite- or muscovite-bearing anorthite+sanidine assemblages have been obtained, which are not showing any differences and therefore point to melt compositions close to the feldspar-quartz join.  相似文献   

9.
The tin‐ and tantalum‐bearing pegmatites of the Bynoe area are located in the western Pine Creek Geosyncline. They are emplaced within psammopelitic rocks in the contact aureole of the Two Sisters Granite. The latter is a Palaeoproterozoic, fractionated, granite with S‐type characteristics and comprises a syn‐ to late‐orogenic, variably foliated, medium‐grained biotite granite and a post‐orogenic, coarse‐grained biotite‐muscovite granite. The pegmatites comprise a border zone of fine grained muscovite + quartz followed inward by a wall zone of coarse grained muscovite + quartz which is in turn followed by an intermediate zone of quartz + feldspar + muscovite. A core zone of massive quartz is present in some occurrences. Feldspars in the intermediate zone are almost completely altered to kaolinite. This zone contains the bulk of cassiterite, tantalite and columbite mineralization. Fluid inclusions in pegmatitic quartz indicate that early Type A (CO2 + H2O ± CH4) inclusions were trapped at the H2O‐CO2 solvus at P～100 MPa, T～300°C (range 240–328°C) and salinity ～6 wt% eq NaCl. Pressure‐salinity corrected temperatures on Type B (H2O + ～20% vapour), C (H2O + < 15% vapour) and D (H2O + halite + vapour) inclusions also fall within the range of Type A inclusions. Oxygen and hydrogen isotope data show that kaolin was either formed in isotopic equilibrium with meteoric waters or subsequent to its formation, from hydrothermal fluid, underwent isotopic exchange with meteoric waters. Fluid inclusion waters from core zone quartz show enrichment in deuterium suggesting metamorphic influence. Isotope values on muscovite are consistent with a magmatic origin. It is suggested that the pegmatites were derived from the post‐orogenic phase of the Two Sisters Granite. Precipitation of cassiterite took place at about 300°C from an aqueous fluid largely as a result of increase in pH due to feldspar alteration.  相似文献   

10.
An increasing number of occurrences of margarite have been reported in the last years. However, previous experimental investigations in the system CaO-Al2O3-SiO2-H2O are limited to the synthesis of margarite and to the upper stability limit according to the reaction (1) 1 margarite?1 anorthite +1 corundum +1 H2O (Chatterjee, 1971; Velde, 1971). Since margarite often occurs together with quartz, the upper stability limit of margarite in the presence of quartz is of special interest. Therefore, the reactions (5) 1 margarite +1 quartz ?1anorthite +1 kyanite/andalusite +1 H2O and (6) 4 margarite+3 quartz ? 2 zoisite+5 kyanite+3 H2O were investigated experimentally using mixtures of natural margarite (from Chester, Mass., USA), quartz, kyanite, andalusite, zoisite, and synthetic anorthite. The indicated equilibrium temperatures at water pressures equal to total pressure are: 515± 25°C at 4 kb, 545 ±15°C at 5 kb, 590±10°C at 7 kb, and 650±10°C at 9 kb for reaction (5), and 651±11°C at 10 kb, 648 ± 8°C at 12.5kb, and 643±13°C at 15kb for reaction (6), respectively. Besides this, additional brackets for equilibrium temperatures were determined for the above cited reaction (1): 520±10°C at 3 kb, 580±10°C at 5 kb, and 640± 20°C at 7 kb. On the basis of these experimentally determined reactions (1), (5), and (6) and of the reactions (3) 2 zoisite +1 kyanite? 4 anorthite +1 corundum +1 H2O (7) 2 zoisite +1 kyanite +1 quartz ? 4 anorthite +1 H2O and (10) 1 pyrophyllite ? 1 andalusite/kyanite+3 quartz+1 H2O for which experimental or, in the case of reaction (3), calculated data were already available, a pressure-temperature diagram with 3 invariant points and 11 univariant reactions was developed using the method of Schreinemakers. This diagram, summarizing both experimental and phase relation studies, allows conclusions about the conditions under which margarite has been formed in nature. Margarite is limited to low grade metamorphism at water pressures up to approximately 3.5 kb; in the presence of quartz, margarite is even limited to low grade metamorphism at water pressures up to 5.5 kb. Only at water pressures higher than the values stated before margarite, and margarite+quartz, respectively, can occur in medium grade metamorphism (as defined by Winkler, 1970 and 1973). For the combined occurrence of margarite+quartz and staurolite as reported by Harder (1956) and Frey (personal communication, 1973) it may be estimated that water pressure has been greater than approximately 5.5 kb, wheras temperature has been in the range from 550 to 650°C. Furthermore, the present study shows that the assemblage zoisite+kyanite (+ H2O) is an indicator of both pressure [P H 2 O> approximately 9kb]and temperature [T> approximately 640 to 650° Cat water Pressures up to 15 kb].  相似文献   

11.
The oligoclase-biotite zone of the Bessi area, central Shikoku is characterized by sodic plagioclase (XCa= 0.10–0.28)-bearing assemblages in pelitic schists, and represents the highest-grade zone of the Sanbagawa metamorphic terrain. Mineral assemblages in pelitic schists of this zone, all with quartz, sodic plagioclase, muscovite and clinozoisite (or zoisite), are garnet + biotite + chlorite + paragonite, garnet + biotite + hornblende + chlorite, and partial assemblages of these two types. Correlations between mineral compositions, mineral assemblages and mineral stability data assuming PH2O = Psolid suggests that metamorphic conditions of this zone are about 610 ± 25°C and 10 ± 1 kbar.
Based upon a comparative study of mineralogy and chemistry of pelitic schists in the oligoclase-biotite zone of the Sanbagawa terrain with those in the New Caledonia omphacite zone as an example of a typical high-pressure type of metamorphic belt and with those in a generalized'upper staurolite zone'as an example of a medium-pressure type of metamorphic belt, progressive assemblages within these three zones can be related by reactions such as:  相似文献   

12.
The techniques of electron probe microanalysis and x-ray diffractometry have been utilized in a study of the sillimanite-potassium feldspar isograd in western Maine. The isograd reaction is theoretically a discontinuous one, calling for the nearly instantaneous loss of muscovite and crystallization of sillimanite and orthoclase, with a small contribution of albite from the pre-existing plagioclase. In fact, muscovite coexists with orthoclase, sillimanite, and plagioclase for a distance of at least seven miles from the isograd (marked by the initial coexistence of orthoclase and sillimanite). In this assemblage, muscovite has an extremely narrow range of composition, about an average of Ms93.5Pg6.5. A possible explanation for the divariant character of the isograd reaction is that, during dehydration, PH2O slowly increased from initial values less than Ptotal + rock strength, under conditions of low permeability, the actual value of PH2O being controlled by a buffer assemblage and local conditions of P and T. An alternative explanation postulates the flattening of thermal gradients following the onset of fractional melting. The isograd reaction is dependent in only a minor way upon the anorthite content of the plagioclase. Below the isograd, a continuous reaction takes place leading to a diminution in paragonite content of muscovite stable in the presence of quartz. It is possible that this reaction leads to the nearly ubiquitous normal zoning of the plagioclase. Changes in the composition of biotite at the isograd are not conspicuous, and can be satisfactorily explained by the release of Mg, Fe, and Ti impurity from the muscovite, and a continuous reaction between ilmenite, quartz, and muscovite. Garnets are not abundant and are high in Mn, both facts probably due to the low pressure of metamorphism, The presence of garnet probably relates to the Mn content of the rock, and seems to be independent of the Mg/Fe ratio of the biotite. The garnets are zoned with respect to Mn and Mg, but often Mn is enriched and Mg depleted in the marginal zone. The Mg/Fe ratio of the biotite varies twofold depending on the presence or absence of pyrrhotite. The transition: microcline → orthoclase depends upon the amount of dissolved albite; the polymorph is orthoclase in the pelitic schists but microcline in the calc-silicate rocks which are much lower in sodium. The plagioclases are of “low” structural type, although is slightly greater than many other “low” plagioclases. A correlation of d(002) of muscovite and paragonite solid solution for the range 0 to 20 % paragonite is given. An appreciable positive volume of mixing for the binary system muscovite-paragonite is indicated.  相似文献   

13.
The greenschist to amphibolite transition as modeled by the reaction zoisite+tremolite + quartz= anorthite+diopside+water has been experimentally investigated in the chemical system H2O−CaO− MgO−Al2O3−SiO2 over the range of 0.4–0.8 GPa. This reaction is observed to lie within the stability fields of anorthite + water and of zoisite + quartz, in accord with phase equilibrium principles, and its position is in excellent agreement with the boundary calculated from current internally-consistent data bases. The small dP/dT slope of 0.00216 GPa/K (21.6 bars/K) observed for this reaction supports the pressure-dependency of this transition in this chemical system. Experimental reversals of the Al content in tremolitic amphibole coexisting with zoisite, diopside, quartz, and water were obtained at 600, 650, and 700°C and indicated Al total cations (atoms per formula unit, apfu) of only up to 0.5±0.08 at the highest temperature. Thermodynamic analysis of these and previous compositional reversal data for tremolitic amphibole indicated that, of the activity/composition relationships considered, a two-site-coupled cation substitution model yielded the best fit to the data and a S 0 (1 bar, 298 K) of 575.4±1.6 J/K · mol for magnesio-hornblende. The calculated isopleths of constant Al content in the amphibole are relatively temperature sensitive with Al content increasing with increasing temperature and pressure. Finally, several experiments in the range of 1.0–1.3 GPa were conducted to define the onset of melting, and thus the upper-thermal limit, for this mineral assemblage, which must involve an invariant point located at approximately 1.05 GPa and 770°C. Received: 24 January 1997 / Accepted: 2 October 1997  相似文献   

14.
Abstract Three reactions are calibrated as geothermobarometers for garnet–orthopyroxene–plagioclase–quartz assemblages, namely: 1/2 ferrosilite + 1/3 pyrope ± 1/2 enstatite + 1/3 almandine (A): ferrosilite + anorthite ± 2/3 almandine + 1/3 grossularite + quartz (B); and enstatite + anorthite ± 2/3 pyrope + 1/3 grossularite + quartz (C). The internally consistent geothermobarometers based on reactions (A), (B) and (C) are calibrated from experimental data only. The thermodynamic parameters of reaction (A) are derived from published experimental data in the FMAS system (n= 104) in the range 700–1400°C and 5–50 kbar, while those for reaction (B) are derived by summation of the existing reversed experimental data of the mineral equilibria: ferrosilite ± fayalite + quartz (D) and anorthite + fayalite ± 2/3 almandine + 1/3 grossularite (E). The retrieved thermodynamic parameters for reactions (A), (B) and (C) are, respectively: (ΔH0, cal) -3367 ± 209, -2749 ± 350 and +3985 ± 545; (ΔS0, cal K?1) -1.634 ± 0.163, -8.644 ± 0.298 and -5.376 ± 0.391; and (ΔV01,298, cal bar?1) -0.024, -0.60946 and -0.5614. On a one-cation basis, the derived Margules parameters of the ternary Ca–Fe–Mg in garnet are: WFe–Mg= -1256 + 1.0 (～0.23) T(K), WMg–Fe= 2880 -1.7 (～0.13) T(K), WCa–Mg= 4047 (～77) -1.5 T(K), WMg–Ca= 1000 (～77) -1.5 T(K), WCa–Fe= -723 + 0.332 (～0.02) T(K), WFe–Ca= 1090, (cal) and the ternary constant C123= -4498 + 1.516 (～0.265) T(K) cal (subregular solution model of non-ideal mixing); and Fe–Mg–Al in orthopyroxene: WFe–Mg= 948 (～200) -0.34 (～0.10) T(K), WFe–Al= -1950 (～500) and WMg–Al= 0 (cal) (regular solution model of non-ideal mixing). The anorthite activity in plagioclase is calculated by the ‘Al-avoidance’model of subregular Ca–Na mixing commonly used for geobarometry based on reactions (B) and (C). When the geothermobarometers are applied to garnet–orthopyroxene–plagioclase–quartz assemblages (n= 45) of wide compositional range from the Precambrian South Indian granulites, temperature ranges of 690–860°C (X= 760 ± 45°C) and pressure ranges of 5–10 kbar were obtained. The P–T values were estimated simultaneously and there is no difference in the pressure calculated from PMg (reaction C) and PFe (reaction B). In the existing calibrations this difference is 1 kbar or more. Furthermore, there is no compositional dependence of the ln K of the experimental data in the FMAS (n= 104) and the CFMAS (n= 78) systems at different temperatures and the estimated temperatures of the South Indian granulites.  相似文献   

15.
Thermodynamic calculations have shown that the dP/dT slope of the reaction 4 margarite+3 quartz5 kyanite +2 zoisite+3 H2O as determined by Storre and Nitsch (1974) is too steep. This reaction has been reinvestigated using synthetic margarite, zoisite, kyanite, and natural quartz in the starting mixtures and using infrared spectroscopy to examine the run products. The experimentally determined dP/dT slope ranges between –2.2 and –17 bars/ K, which is in excellent agreement with predictions based on thermodynamics. An internally consistent set of univariant curves could be fitted to the experimental reversals for the above reaction and for the reactions margarite+ quartz anorthite+kyanite+H2O and 2 zoisite+kyanite +quartz 4 anorthite+H2O investigated by Nitsch et al. (1981) and Goldsmith (1981), respectively. Addition of up to 40 mol % of the component NaAl2(Si3Al) ·O10(OH)2 (paragonite) to margarite will increase the stability of the margarite solid solution plus quartz by 2–3 kbar without significantly affecting the dP/dT slope, making the paragenesis margarite plus quartz a good geobarometer.  相似文献   

16.
A petrological and thermobarometric study of the Lago Teleccio hornfelses was undertaken to reconstruct the polymetamorphic evolution and constrain the P–T conditions of Permian contact metamorphism. The Lago Teleccio metasedimentary rocks record a Variscan regional metamorphism characterized by amphibolite facies mineral assemblages including quartz, plagioclase, K‐feldspar (Kfs 1), biotite, garnet (Grt 1) and staurolite; this was followed by a late‐Variscan mylonitization event. Metamorphism of the Variscan metamorphic rocks at the contact with a Permian granitic intrusion produced static recrystallization and/or new growth of quartz, garnet (Grt 2), plagioclase, K‐feldspar (Kfs 2), cordierite, green spinel, biotite and prismatic sillimanite (Contact 1). This thermal event, which occurred at a peak pressure of 0.23–0.35 GPa, temperature of 670–700 °C and aH2O of 0.75–1, was followed either during post‐contact metamorphism cooling or, more likely, during the early‐Alpine metamorphism by the breakdown of cordierite into an anhydrous kyanite + orthopyroxene + quartz assemblage. The poorly developed early‐Alpine eclogite facies metamorphism (Alpine 1) was characterized by relatively anhydrous mineral associations and low strain, which locally produced coronitic and pseudomorphous microstructures in metasedimentary rocks, with scanty formation of jadeite, zoisite and a new high‐pressure garnet (Grt 3). Greenschist facies retrogression (Alpine 2) was characterized by the local development of a chlorite‐ and muscovite‐bearing mineral association, suggestive of aqueous fluid incursion. In the hornfelses, the limited extent of metamorphic overprinting is suggested by the fine grain size of the Alpine mineral associations, which formed at the expense of the Permian contact metamorphic associations, and was favoured by the anhydrous mineralogy of the hornfelses.  相似文献   

17.
Contact metamorphism has been recognized along a 4 km wide belt adjacent to the shallow‐dipping eastern margin of the Arthursleigh Tonalite, an Early Devonian pluton of the Marulan Batholith, eastern New South Wales. In Ordovician psammitic and pelitic rocks three zones of progressive contact metamorphism range from muscovite + biotite + chlorite assemblages in the outer zone to K‐feldspar + cordierite assemblages adjacent to the pluton and in metasedimentary xenoliths. Retrograde phenomena include extensive replacement of metamorphic minerals by ‘sericite’ and chlorite. Calcareous metasediments adjacent to the tonalite typically contain assemblages of quartz + calcic plagioclase + ferrosalite + sphene, or wollastonite + calcite + diopside with minor grossularite and vesuvianite. Thermal effects in volcanic rocks along the western margin of the pluton are confined to recrystallization of the groundmass.

The regional geology indicates confining pressures of approximately 1 kbar at the time of emplacement of the tonalite. Contact metamorphic temperatures were estimated from two‐feldspar geothermometry to attain a maximum of approximately 590°C for rocks in the innermost zone of the aureole and 700°C for the xenoliths. Fluid compositions attending progressive contact metamorphism were water‐rich (Xco2<0.2) and, during cooling, these fluids probably account for the extensive retrograde hydration observed in the aureole.  相似文献   

18.
In the system CaO-MgO-A12O3-SiO2 the tie lines connecting anorthite with other phases are sequentially broken down with increasing pressure according to the following univariant reactions: anorthite+ enstatitess+sillimanite pyrope-grossularss+quartz (3), anorthite+enstatitess pyrope-grossularss+diopsidess+quartz (2), anorthite+pyrope-grossularss+ quartz diopsidess+kyanite (4) and anorthite+diopsidess grossular-pyropess +kyanite+quartz (8). At 1,200 ° C these reactions occur at 14.5± 0.5, 15.5±0.5, 19.5±0.5 and 26.4±1 kilobar and have positive slopes (dP/dT) of 1±0.5, 2.8±0.5, 13.3±0.5 and 24±2bars/°C respectively. An invariant point involving kyanite rather than sillimanite, occurs at 850 °C±25 °C and 14.5±0.5kbar at the intersection of reactions (3), (2) and (4). Reaction(4) exhibits significant curvature with an increase in dP/dT from 13.3±0.5 to 18.5± 0.5 bars/°C between 1,050° and 850° C. The pressure at which the complete grossular-pyrope join is stable with quartz is estimated at 41 ± 1 kbar at 1,200 ° C. The pressure at which garnet appears according to reaction (2) is lowered by 5 kbar for a composition with anorthite and orthopyroxene (En0.5Fs0.5). Enstatite and plagioclase (An0.5Ab0.5) first produce garnet at 2 kbar higher pressure than enstatite and pure anorthite (reaction (2)). The calcium content of garnet in various divariant assemblages is relatively insensitive to temperature but very sensitive to pressure, it is therefore a useful geobarometer. At metamorphic temperatures of 700–850 °C pressures of 8–10 kbar are required for the formation of quartz-bearing garnet granulites containing calcic plagioclase and with (Mg/Mg+Fe) bulk = 0.5.  相似文献   

19.
The regional distribution of metamorphic mineral assemblages in Mesozoic carbonate rocks of the Western Hohe Tauern allows the mapping of isograds based on the appearance of biotite+calcite and biotite+zoisite+calcite. The latter isograd corresponds approximately to the thermal maximum of the alpidic metamorphism in the central part of this area. An estimate of P, T, X fluid conditions can be obtained from phase relations among muscovite, biotite, chlorite, margarite, tremolite, zoisite, anorthite, quartz, calcite, and dolomite in the system K2O-CaO-MgO-Al2O3-SiO2-H2O-CO2 which approximates the composition of marls. Calculations based on various experimental and thermodynamic data have been made with emphasis on phase relations pertinent to a group of carbonate rocks with very low Fe and Na contents in non-opaque minerals. Significant and opposite deviations from the phase relations for stochiometric end member mineral compositions are due to the substitutions F-OH and Mg+Si-2Al. Consistency of observed and calculated phase relations is favoured by high F-contents. For the majority of carbonate rocks in the high metamorphic zone, maximum temperatures around 550° C, minimum pressures of 4–6 kb, and relatively low XCO2 values within the stability field of zoisite and of biotite+calcite+quartz are indicated.  相似文献   

20.
Experiments with synthetic starting materials of muscovite, phlogopite, zoisite, kyanite and quartz were performed in the pressure temperature range 10–25 kbar, 640–780° C under water excess conditions. The reaction muscovite+zoisite+quartz+vapor=liquid+kyanite was bracketed at 10.5 kbar/689–700° C, 15.5 kbar/709–731° C and 20 kbar/734–745° C. The equivalent reaction in the Mg-bearing system muscovitess +zoisite+quartz+vapor=liquid+kyanite+phlogopitess lies at the same temperature around 10 kbar and approximately 10° C higher around 20 kbar, compared with the Mg-free reaction. At slightly higher temperatures formation of melt and tremolitess was reversibly observed from the assemblage phlogopitess+zoisite +kyanite+quartz around 10.5 kbar/690–710° C, 15.5 kbar/720–750° C and 20.5 kbar/745–760° C. In the subsolidus region, the reaction muscovitess+talcss+ tremolitess=phlogopitess+zoisite+quartz+vapor were located in the range 700° C/16.7–19.0 kbar and 740° C/19.7–20.8 kbar. From these data, a wedge shaped stability field of phlogopitess+zoisite+quartz appears with a high P, T termination around 21 kbar/755° C. Muscovite+tremolite+talc or kyanite comes in at higher pressures. These phase relations are in qualitative accord with petrographic observations from high pressure metamorphic areas. Formation and crystallization of melts in rocks of a wide compositional range involving zoisite/epidote has been ascribed to relatively high pressures and is consistent with experimentally determined stability fields in the simplified KCMASH system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号