首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
About a century of exploitation of the galena-arsenopyrite deposit of Baccu Locci in Sardinia (Italy) has caused a severe, persistent arsenic contamination that extends downstream from the mine for several kilometres. Differently from As, the contamination of lead in surface waters is only localised in the upper part of the mine despite very high Pb concentrations in geologic materials (waste rocks, tailings, stream sediments, soils) over the whole Baccu Locci stream catchment. The aqueous and solid speciation of Pb in various environmental media of the Baccu Locci system was determined by means of a combined analytical (ICP-MS, SEM-EDX, TEM-EDX, chemical extraction) and thermodynamic approach (PHREEQC). The study has pointed out that relatively little Pb (up to 30 µg/L) is initially released to surface waters (pH = 7–8, Eh = 0.4–0.6 V) very rapidly due to dissolution of anglesite that is the first product of galena oxidation. Subsequently, Pb is removed (down to 0.6 µg/L) by probable sorption onto hydrous ferric oxides (e.g. ferrihydrite) and/or possible precipitation of As-containing plumbojarosite that is the main secondary Pb-bearing phase in stream sediments/tailings along the Baccu Locci stream course. The latter hypothesis is controversial since it is reported from the literature that plumbojarosite is formed under acidic conditions, although there is contrary field evidence as well. Bearing in mind the uncertainties introduced from thermodynamic and analytical data, the solubility calculations indicate strong undersaturation of surface waters with respect to plumbojarosite (SI: ? 19.9 to ? 3.7). On the contrary arsenatian plumbojarosite is at or close to saturation (SI: ? 0.6 to 3.2) in most surface waters and beudantite is clearly above saturation (SI: 4.1 to 12.7). This suggests that the incorporation of As might increase the stability of plumbojarosite, extending it up to near-neutral conditions. As a consequence, Pb is prevented from being released downstream to surface waters, and dissolved Pb concentrations remain definitely below the Italian and WHO limits for drinking waters (50 µg/L and 10 µg/L, respectively).  相似文献   

2.
Short-term changes in water chemistry, and especially in dissolved trace element concentrations, associated with diel cycles during base-flow conditions at a specific sampling station in the Baccu Locci stream draining the homonymous old mine area in Sardinia (Italy) were investigated. Diel fluctuations in pH and alkalinity were correlated with the temperature-dependent CO2 solubility and the biologically-induced CO2 production, both of which were higher during the night. Adsorption/desorption to/from streambed material, in particular ferrihydrite, is believed to be the main in-stream mechanism causing the observed diel variations in dissolved concentrations of As and Zn. Arsenic was mainly affected by the dual action of temperature and competing carbonate ions, whereas pH seemed less important. Temperature acted in accordance with the exothermic feature of anion sorption onto hydrous metal oxide surfaces; aqueous carbonate species exerted their competitive effect in relation to alkalinity variation. Zinc was primarily affected by temperature, in accordance with the endothermic feature of metal cation sorption onto hydrous metal oxide surfaces, and secondly by pH. Co-precipitation of As and Zn with calcite is another possible mechanism, which requires further investigation involving examination of inorganic and biological materials coating the streambed. All these processes potentially controlling the diel cycles of trace elements should be carefully considered to assess the effectiveness of remediation actions currently in progress at Baccu Locci. A normalization method for data from asynchronous sampling has been developed and proposed in order to eliminate or at least attenuate the effect of sampling time and provide an additional tool to identify the processes/mechanisms involved in trace element concentration fluctuations observed along a contaminated stream during base-flow conditions.  相似文献   

3.
《Applied Geochemistry》2001,16(6):583-596
Nitrate concentrations monitored for 2.5 a in the stream water and groundwater of a small catchment, 86.5% of which is devoted to intensive agriculture, show temporal variations with a maximum during winter (as much as 200 mg l−1 in groundwater and 100 mg l−1 in stream water) and a minimum at the end of summer/beginning of autumn. Variations were also observed in the stream water and shallow groundwater after rainfall. The processes involved to explain these variations, determined mainly from NO3− Cl−, SO42−, piezometric and streamflow data, are: (a) variability of the relative contributions to stream water and shallow groundwater by upward fluxes of deeper groundwater which, as demonstrated previously, is denitrified mainly as a result of reaction with pyrite. (b) Denitrification of shallow groundwater during summer with organic matter acting as the electron donor. (c) Dilution by rain water. Nitrate concentrations in both stream water and shallow groundwater depend on the amount of precipitation, with an increased contribution from deep denitrified groundwater during dry periods. The temporal variations in NO3− concentration observed several metres below the water table are related to the preferential and rapid movement of NO3−-polluted water through fractures and large fissures, which has been estimated at 1 m day−1. Nitrate pollution in the catchment, because of the interaction with pyrite, also increases the net chemical weathering rate to values exceeding the world average.  相似文献   

4.
This study investigates the geochemical characteristics of the acid mine drainage discharged from the abandoned mine adits and tailing piles in the vicinity of the Lousal mine and evaluates the extent of pollution on water and on the stream sediments of the Corona stream. Atmospheric precipitation interacting with sulphide minerals in exposed tailings produces runoff water with pH values as low as 1.9–2.9 and high concentrations of (9,249–20,700 mg l−1), Fe (959–4,830 mg l−1) and Al (136–624 mg l−1). The acidic effluents and mixed stream water carry elevated Cu, Pb, Zn, Cd and As concentrations that exceed the water quality standards. However, the severity of contamination generally decreases 4 km downstream of the source due to mixing with fresh waters, which causes the dilution of dissolved toxic metals and neutralization of acidity. Some natural attenuation of the contaminants also occurs due to the general reduced solubility of most trace metals, which may be removed from solution, by either co-precipitation or adsorption to the iron and aluminium precipitates.  相似文献   

5.
《Applied Geochemistry》2004,19(11):1855-1864
The Coquimbo region has been one of the richest producers of Cu, Au and Hg in Chile, and some of the deposits have been mined almost continuously since the 16th century. To assess the potential environmental contamination in this region, the authors measured the concentration of Cu, As, Cd, Zn and Hg in samples of stream and mine waters, stream sediments, soils, flotation tailings, and mine wastes in the Andacollo (Cu, Au, Hg) and Punitaqui (Cu–Au, Hg) districts. The concentration of Hg in the atmosphere in these districts were also measured. Although contamination is strongly controlled by the ore in each district, metal dispersion is modified by the degree of metallurgical processing efficiency as shown by the outdated Cu flotation system at Andacollo (stream sediments Cu 75–2200 μg/g). Conversely, more efficient procedures at Punitaqui resulted in less stream contamination, where stream sediments contained Cu ranging from 110–260 μg/g. However, efficient concentration by flotation of a given metal (e.g. Cu) may lead to the loss of another (e.g. Hg up to 190 μg/g in the tailings at Punitaqui), and therefore, to contamination via erosion of the tailings (downstream sediments Hg concentrations up to 5.3 μg/g). Continued use of Hg for Au amalgamation at Andacollo has led to significant contamination in stream sediments (0.2–3.8 μg/g Hg) and soils (2.4–47 μg/g Hg). Communities in this region are underdeveloped, and decades of inefficient treatment of flotation tailings and waste-rock stock piles has resulted in significant contamination of the surrounding landscape.  相似文献   

6.
《Applied Geochemistry》2003,18(9):1387-1397
An integrated approach involving the use of ion chromatography–inductively coupled plasma-mass spectrometry (IC–ICP-MS), X-ray absorption spectroscopy (XAS) and sequential extraction procedures has been employed to elucidate the solution and solid phase speciation and partitioning of As in a polluted urban watercourse. Dissolved As concentrations exceeding 130 μg l−1 and comprising entirely inorganic species were determined in the waters of Tinker Brook, a contaminated stream. Upon mixing with a relatively As-free stream, White Ash Brook, both the total concentration of dissolved As and the proportion of As(V) were observed to decrease dramatically below values expected for conservative mixing. This was ascribed to adsorption onto the Fe (oxyhydr)oxides that characterise White Ash Brook on the basis of sequential extraction and direct analysis of the solids via XAS . The shift in oxidation state is speculated to be due to the faster rate of adsorption of As(V) on Fe (oxyhydr)oxides than As(III) in this fast flowing stream system. During periods of reduced supply of anthropogenic As, a small, secondary input of As(III) to White Ash Brook is detectable, delivered by a small ochreous seepage. The Fe (oxyhydr)oxide As-rich deposits surrounding this discharge may also act as a significant source of As upon dissolution during stormflow conditions.  相似文献   

7.
《Applied Geochemistry》2001,16(11-12):1369-1375
The heavy metal contamination of soils and waters by metalliferous mining activities in an area of Korea was studied. In the study area of the Imcheon Au–Ag mine, soils and waters were sampled and analyzed using AAS for Cd, Cu, Pb and Zn. Analysis of HCO3−, F−, NO3− and SO42− in water samples was also undertaken by ion chromatography. Elevated concentrations of the metals were found in tailings. The maximum contents in the tailings were 9.4, 229, 6160 and 1640 mg/kg extracted by aqua regia and 1.35, 26.4, 70.3 and 410 mg/kg extracted by 0.1 N HCl solution for Cd, Cu, Pb and Zn, respectively. These metals are continuously dispersed downstream and downslope from the tailings by clastic movement through wind and water. Because of the existence of sulfides in the tailings, a water sample taken on the tailings site was very acidic with a pH of 2.2, with high total dissolved solids (TDS) of 1845 mg/l and electric conductivity (EC) of 3820 μS/cm. This sample also contained up to 0.27, 1.90, 2.80, 53.4, 4,700 mg/l of Cd, Cu, Pb, Zn and SO42−, respectively. TDS, EC and concentrations of metals in waters decreased with distance from the tailings. The total amount of pulverized limestone needed for neutralizing the acid tailings was estimated to be 46 metric tons, assuming its volume of 45,000 m3 and its bulk density of 1855 kg/m3.  相似文献   

8.
Hardpans, or cemented layers, form by precipitation and cementation of secondary minerals in mine tailings and may act as both physical and chemical barriers. Precipitation of secondary minerals during weathering of tailings can sequester metal(loid)s, thereby limiting their release to the environment. At Montague Gold Mines in Nova Scotia, tailings are partially cemented by the Fe arsenate mineral scorodite (FeAsO4·2H2O). Previous studies have shown that the formation of scorodite can effectively limit aqueous As concentrations due to its relatively low solubility (<1 mg/L at pH 3–4) and high As content (43–52 wt.% As2O5, this study). Co-existing waters and solids were sampled at Montague Gold Mines to identify present-day field conditions influencing scorodite precipitation and dissolution, and to better understand the mineralogical and chemical relationship between hardpan and tailings. In addition to scorodite, hardpan cements were found to include amorphous Fe arsenate and Fe oxyhydroxide. Nearly all hardpan is associated with historical arsenopyrite-bearing concentrate which provides a source of acidity, As5+ and Fe3+ for secondary mineral precipitation. Pore waters sampled from the hardpan have pH values ranging from 2.43 to 7.06. Waters with the lowest pH values also have the highest As concentrations (up to 35.8 mg/L) and are associated with the most extensive hardpan and greatest amount of weathered sulfide. Samples from areas with discontinuous hardpan and less sulfide have near-neutral pH and lower As concentrations. Detailed petrographic observations indicate that the identity and stability of As-bearing secondary minerals depends on the continued availability of sulfide concentrate. The results of this study are being used to develop remediation strategies for highly weathered, hardpan-bearing tailings that consider the stability of both primary and secondary minerals under various cover scenarios.  相似文献   

9.
The purpose of this work is to characterize the hydrochemical behavior of acid mine drainages (AMD) and superficial waters from the Adoria mine area (Northern Portugal). Samples of superficial and mine drainage water were collected for one year, bi-monthly, with pH, temperature, Eh, conductivity and HCO3 determined in situ with chemical analyses of SO4, Ca, K, Mg, Na, Cl, Ag, As, Bi, Co, Cu, Fe, Mn, Ni, Pb, Zn and Cd. In the mine, there are acidic waters, with low pH and significant concentrations of SO4, and metals (Fe, Mn, Zn, Cu, Pb, Cd and Ni), while in the superficial natural stream waters outside the mine, the pH is close to neutral, with low conductivity and lower metal concentrations. The stream waters inside the mine influence are intermediate in composition between AMD and natural stream waters outside the mine influence. Principal Component Analysis (PCA) shows a clear separation between AMD galleries and AMD tailings, with tailings having a greater level of contamination.  相似文献   

10.
This study reports on the seepage of metals, metalloids and radionuclides from the Mary Kathleen uranium mill tailings repository. Since rehabilitation in the 1980s, the capped tailings have developed a stratified hydrochemistry, with acid (pH 3.7), saline, metal-rich (Fe, Mn, Ni, U ± As, Pb, Zn), oxygenated (1.05 mg L−1 DO), radioactive waters in the upper tailings pile and near-neutral pH (pH 7.57), metal-poor, reduced (0.08 mg L−1 DO) waters at depth. Seepage (∼0.5 L s−1) of acid (pH 5.5), metal-rich (Fe, Mn ± Ni, U, Zn), radioactive (U-235, U-238, Ra-226, Ra-228, Ac-227) waters occurs from the base of the tailings dam retaining wall into the former evaporation pond and local drainage system. Oxygenation of the seepage waters causes the precipitation of Fe and coprecipitation and adsorption of other metals (U, Y), metalloids (As), rare earth elements (Ce, La) and radionuclides (U-235, U-238). By contrast, alkalis and alkaline–earth elements (Ca, K, Mg, Na, Sr), Mn, sulfate and to some degree metals (U, Zn, Ni), rare earth elements (Ce, La) and radionuclides (U-235, U-238, Ra-226, Ra-228) remain in solution until pH neutralisation and evaporation lead to their precipitation in efflorescences and sulfate-rich evaporative sediments. While the release of contaminant loads from the waste repository through seepage is insignificant (e.g. ∼5 kg of U per year), surface waters downstream of the tailings impoundment possess TDS, U and SO4 concentrations that exceed Australian water quality guideline values in livestock drinking water. Thus, in areas with a semi-arid climate, even insignificant load releases of contaminants from capped tailings repositories can still cause the deterioration of water quality in ephemeral creek systems.  相似文献   

11.
《Applied Geochemistry》2006,21(9):1522-1538
Factors controlling the chemical composition of water interacting with finely-crushed kimberlite have been investigated by sampling pore waters from processed kimberlite fines stored in a containment facility. Discharge water from the diamond recovery plant and surface water from the containment facility, which acts as plant intake water, were also sampled. All waters sampled are pH-neutral, enriched in SO4, Mg, Ca, and K, and low in Fe. Pore-water samples, representing the most concentrated waters, are characterized by the highest SO4 (up to 4080 mg l−1), Mg (up to 870 mg l−1), and Ca (up to 473 mg l−1). The water discharged from the processing plant has higher concentrations of all major dissolved constituents than the intake water. The dominant minerals present in the processed fines and the kimberlite ore are serpentine and olivine, with small amounts of Ca sulphate and Fe sulphide restricted to mud xenoclasts. Reaction and inverse modeling suggest that much of the water-rock interaction takes place within the plant and involves the dissolution of chrysotile and Ca sulphate, and precipitation of silica and Mg carbonate. Evapoconcentration also appears to be a significant process affecting pore water composition in the containment facility. The reaction proposed to be occurring during ore processing involves the dissolution of CO2(g) and may represent an opportunity to sequester atmospheric CO2 through mineral carbonation.  相似文献   

12.
《Applied Geochemistry》2003,18(3):371-381
The Nambija Mineral District (NMD) is located in the southeastern part of Ecuador, east of Zamora (Zamora Chinchípe's country), Ecuadorian Amazon. In this district, Au occurrences have been know since colonial and pre-colonial times, but only after the early 1980s has intensive artisanal Au mining activity been developed. Currently, the different NMD Au occurrences continue to be exploited by artisanal operations and are difficult to control in the study area. The environmental impacts due to Au mining are a consequence of the illegal situation and deficiency in controlling the techniques of ore exploitation. The Au extraction is carried out by outdoor amalgamation, so the indiscriminate use of Hg by artisanal miners, associated with careless methods of tailings disposal, has caused occupational exposure and environmental degradation. The present study evaluated the geochemical dispersion and concentrations of local contamination of metallic Hg in soils, stream sediments and mine tailings in the NMD area. This article aims to contribute to the discussion of environmental changes caused by the artisanal Au mining in the Nambija district. A total of 82 samples (32 soil, 40 stream sediment and 10 mine tailings) were analyzed. The results were compared with the Hg levels in soil and stream sediments considered not to be contaminated in the Nambija mining area and in other areas where Hg is mined in the Amazon basin. In this work, mean total Hg (T-Hg) concentrations of 1.7 μg g−1 in soils and 2.7 μg g−1 in stream sediments have been found. Mercury values in the mine tailing samples revealed values ranging from 89 to 1555 μg g−1. The results found for Hg in the different analyzed materials pointed to contamination of the studied area by this metal, while soil erosion is responsible for an increase in stream sediment's T-Hg concentrations in the different aquatic ecosystems of the Nambija Creek and Nambija River.  相似文献   

13.
A numerical model of chemical weathering in soil horizons and underlying bedrock (WITCH) has been coupled to a numerical model of water and carbon cycles in forest ecosystems (ASPECTS) to simulate the concentration of major species within the soil horizons and the stream of the Strengbach granitic watershed, located in the Vosges Mountains (France). For the first time, simulations of solute concentrations in soil layers and in the catchment river have been performed on a seasonal basis. The model is able to reproduce the concentrations of most major species within the soil horizons, as well as catching the first-order seasonal fluctuations of aqueous calcium, magnesium and silica concentrations. However, the WITCH model underestimates concentrations of Mg2+ and silica at the spring of the catchment stream, and significantly underestimates Ca2+ concentration. The deficit in calculated calcium can be compensated for by dissolution of trace apatite disseminated in the bedrock. However, the resulting increased Ca2+ release yields important smectite precipitation in the deepest model layer (in contact with the bedrock) and subsequent removal of large amount of silica and magnesium from solution. In contrast, the model accurately accounts for the concentrations of major species (Ca, Mg and silica) measured in the catchment stream when precipitation of clay minerals is not allowed. The model underestimation of Mg2+ and H4SiO4 concentrations when precipitation of well crystallized smectites is allowed strongly suggests that precipitation of well crystallized clay minerals is overestimated and that more soluble poorly crystallized and amorphous materials may be forming. In agreement with observations on other watersheds draining granitic rocks, this study indicates that highly soluble trace calcic phases control the aqueous calcium budget in the Strengbach watershed.  相似文献   

14.
In this study a typical coastal karst aquifer, developed in lower Cretaceous limestones, on the western Mediterranean seashore (La Clape massif, southern France) was investigated. A combination of geochemical and isotopic approaches was used to investigate the origin of salinity in the aquifer. Water samples were collected between 2009 and 2011. Three groundwater groups (A, B and C) were identified based on the hydrogeological setting and on the Cl− concentrations. Average and maximum Cl− concentrations in the recharge waters were calculated (ClRef. and ClRef.Max) to be 0.51 and 2.85 mmol/L, respectively). Group A includes spring waters with Cl− concentrations that are within the same order of magnitude as the ClRef concentration. Group B includes groundwater with Cl− concentrations that range between the ClRef and ClRef.Max concentrations. Group C includes brackish groundwater with Cl− concentrations that are significantly greater than the ClRef.Max concentration. Overall, the chemistry of the La Clape groundwater evolves from dominantly Ca–HCO3 to NaCl type. On binary diagrams of the major ions vs. Cl, most of the La Clape waters plot along mixing lines. The mixing end-members include spring waters and a saline component (current seawater or fossil saline water). Based on the Br/Clmolar ratio, the hypothesis of halite dissolution from Triassic evaporites is rejected to explain the origin of salinity in the brackish groundwater.Groundwaters display 87Sr/86Sr ratios intermediate between those of the limestone aquifer matrix and current Mediterranean seawater. On a Sr mixing diagram, most of the La Clape waters plot on a mixing line. The end-members include the La Clape spring waters and saline waters, which are similar to the deep geothermal waters that were identified at the nearby Balaruc site. The 36Cl/Cl ratios of a few groundwater samples from group C are in agreement with the mixing hypothesis of local recharge water with deep saline water at secular equilibrium within a carbonate matrix. Finally, PHREEQC modelling was run based on calcite dissolution in an open system prior to mixing with the Balaruc type saline waters. Modelled data are consistent with the observed data that were obtained from the group C groundwater. Based on several tracers (i.e. concentrations and isotopic compositions of Cl and Sr), calculated ratios of deep saline water in the mixture are coherent and range from 3% to 16% and 0% to 3% for groundwater of groups C and B, respectively.With regard to the La Clape karst aquifer, the extension of a lithospheric fault in the study area may favour the rise of deep saline water. Such rises occur at the nearby geothermal Balaruc site along another lithospheric fault. At the regional scale, several coastal karst aquifers are located along the Gulf of Lion and occur in Mezosoic limestones of similar ages. The 87Sr/86Sr ratios of these aquifers tend toward values of 0.708557, which suggests a general mixing process of shallow karst waters with deep saline fossil waters. The occurrence of these fossil saline waters may be related to the introduction of seawater during and after the Flandrian transgression, when the highly karstified massifs invaded by seawater, formed islands and peninsulas along the Mediterranean coast.  相似文献   

15.
At sites of groundwater contamination, predictions of contaminant behavior and evaluation of remedial strategies depend on identification and characterization of the geochemical processes affecting contaminant migration. Heavy-metal loadings to waters and sediments by leachate from the Golbasi waste disposal site in Ankara, Turkey, have been evaluated quantitatively using hydrogeochemical modeling. The groundwater of the waste disposal area, characterized by high concentrations of Ca, K, Cl, Cd, Pb, Zn, Cu, B, Ni, SO4, and NO3, contaminates the waters and sediments in the down-gradient area, Eymir Lake and a swamp along the flow path. An advective mass transport duration is ～15 years for unretarded contaminants to move from the waste disposal well area to the southern shoreline of Eymir Lake. Mixing calculations suggest that the down-gradient groundwater is formed by mixing of 40 to 72% upgradient groundwater and 28 to 60% waste-disposal-area groundwater, as well as Eymir Lake surface-water ion concentrations formed by mixing of down-gradient groundwater (3%-25%) and swamp-water ion concentrations (75-97%) along the flow path. An evaluation of the changes in concentration of trace ion-related precipitation/dissolution and exchange reactions between water and sediments for the formation of both Eymir Lake surface-water composition and the down-gradient groundwater composition indicate considerable trace-ion content of the clays (exchangers) and related reactions in the system. These results suggest that the amounts of contaminants removed from or added both to the down-gradient groundwater and to surface waters through mixing, dilution, and evaporation processes are rather small. The amounts of ions in the waters at the present stage of the contamination process are predominantly governed by exchange and dissolution/precipitation reactions.  相似文献   

16.
《Applied Geochemistry》2003,18(2):221-239
The Aznalcóllar tailings dam at Boliden Apirsa's Aznalcóllar/Los Frailes Ag–Cu–Pb–Zn mine 45 km west of Seville, Spain, was breached on 25 April 1998, flooding approximately 4600 hectares of land along the Rı́os Agrio and Guadiamar with approximately 5.5 million m3 of acidic water and 1.3×106 m3 of heavy metal-bearing tailings. Most of the deposited tailings and approximately 4.7×106 m3 of contaminated soils were removed to the Aznalcóllar open pit during clean-up work undertaken immediately after the spill until January 1999. Detailed geomorphological and geochemical surveys of the post-clean-up channel, floodplain and valley floor, and sediment and water sampling, were carried out in January and May 1999 at 6 reaches representative of the types of river channel and floodplain environments in the Rı́o Guadiamar catchment affected by the spill. The collected data show that the clean-up operations removed enough spill-deposited sediment to achieve pre-spill metal (Ag, As, Cd, Cu, Pb, Sb, Tl, Zn) concentrations in surface sediment. These concentrations, however, are still elevated above pre-mining concentrations, and emphasise that mining continues to contaminate the Agrio-Guadiamar river system. Dilution by relatively uncontaminated sediment appears to reduce metal concentrations downstream but increases in metal and As concentrations occur downstream, presumably as a result of factors such as sewage and agriculture. River water samples collected in May 1999 have significantly greater dissolved concentrations of metals and As than those from January 1999, probably due to greater sulphide oxidation from residual tailings with concomitant release of metals in the warmer early summer months. These concentrations are reduced downstream, probably by a combination of dilution and removal of metals by mineral precipitation. Single chemical extractions (de-ionised water, CaCl2 0.01 mol l−1, CH3COONH4 1 M, CH3COONa 1 M and ammonium oxalate 0.2 M) on alluvial samples from reaches 1 and 6, the tailings, pre-spill alluvium and marl have shown that the order of sediment-borne contaminant mobility is generally Zn>Cd>Cu>Pb>As. Pb and As are relatively immobile except possibly under reducing conditions. Much of the highly contaminated sediment remaining in the floodplain and channel still contains a large proportion of tailings-related sulphide minerals which are potentially reactive and may continue to release contaminants to the Agrio–Guadiamar river system. Our work emphasises the need for pre-mining geomorphological and geochemical data, and an assessment of potential contributions of contaminants to river systems from other, non-mining sources.  相似文献   

17.
《Applied Geochemistry》2000,15(9):1383-1397
Water pollution arising from base metal sulphide mines is problematic in many countries, yet the hydrogeology of the subsurface contaminant sources is rarely well-characterized. Drainage water pumped from an active F–Pb mine in northern England has unusual chemistry (alkaline with up to 40 mg.l−1 Zn) which profoundly impacts the ecology of the receiving watercourse. Detailed in-mine surveys of the quantity and quality of all ground water inflows to the mine were made. These revealed major, temporally persistent heterogeneities in ground water quality, with three broad types of water identified as being associated with distinct hydrostratigraphic units. Type I waters (associated with the Firestone Sill aquifer) are cool (<10°C), Ca–HCO3–SO4 waters, moderately mineralized (specific electrical conductance (SEC)≤410 μS.cm−1) with <4 mg.l−1 Zn. Type II waters (associated with the Great Limestone aquifer) are warmer (≈15°C), of Ca–SO4 facies, highly mineralized (SEC≤1500 μS.cm−1) with ≤40 mg.l−1 Zn. Type III waters (in the deepest workings) are tepid (>18°C), of Ca–HCO3–SO4 facies, intermediately mineralized (SEC≤900 μS.cm−1) with ≤13 mg.l−1 Zn, and with significant Fe (≤12 mg.l−1) and Pb (≤8 mg/l). Monotonic increases in temperature and Cl− concentration with depth contrast with peaks in total mineralization, SO4 and Zn at medium depth (in Type II waters). Sulphate, Pb and Zn are apparently sourced via oxidation of galena and sphalerite, which would release each metal in stoichiometric equality with SO4. However, molal SO4 concentrations typically exceed those of Pb and Zn by 2–3 orders of magnitude, which mineral equilibria suggest is due to precipitation of carbonate “sinks” for these metals. Contaminant loading budgets demonstrate that, although Type II waters amount to only 25% of the total ground water inflow to the mine, they account for almost 60% of the total Zn loading. This observation has important management implications for both the operational and post-abandonment phases of the mine life cycle.  相似文献   

18.
《Applied Geochemistry》2000,15(5):629-646
Stream waters and sediments draining a gossan tailings pile at the Murray Brook massive sulphide deposit were collected to investigate Au mobility. Weathering of the massive sulphides at Murray Brook during the Late Tertiary period resulted in the concentration of Au in the gossan cap overlying the supergene Cu and unoxidized massive sulphide zones of the deposit. The gossan was mined between 1989 and 1992, and Au and Ag were extracted using a cyanide vat leach process. Although stream sediments prior to mining had Au<5 ppb (the detection limit), sediments collected in 1997 had Au contents ranging up to 256 ppm with values up to 6 ppm more than 3 km downstream from the deposit. Dissolved Au contents were similarly anomalous, up to 19 μg/L and in excess of 3 μg/L 3 km downstream. The elevated Au contents in the waters and sediments are interpreted to reflect complexation of Au (as Au(CN)2−) by cyanide hosted within the gossan tailings pile. Precipitation recharges through the tailings pile with groundwater flow exiting to Gossan Creek. Degradation of cyanide along the flow path and within Gossan Creek allows colloidal Au to form via reduction of Au(I) by Fe2+, consistent with SEM observations of Au as <1 μm subrounded particles. In the surface waters, the majority of the Au must be in a form <0.45 μm in size to account for the similarity in Au contents between the <0.45 μm and unfiltered samples. The very elevated stream sediment Au values close to the headwaters of Gossan Creek near the tailings indicate that upon exiting to the surface environment, Au(CN)2− complexes are rapidly destroyed and Au removed from solution. However, the high Au<0.004 μm/Autotal in the headwaters and the extended Au dispersion in Gossan Creek waters and sediments suggest that Au(CN)2− complexes persist for the full length of Gossan Creek. The decrease in aqueous Au which is less than 0.004 μm indicates that Au is converted from a complexed form to a colloidal form with increasing distance downstream, consistent with dissolved NO3− contents which decrease from 5210 μg/L near the headwaters to 1350 μg/L at the lower end of the stream.  相似文献   

19.
《Applied Geochemistry》2002,17(4):445-454
Processing waters contain up to 10 mg l−1 dissolved As at the Macraes mine, New Zealand, and this is all removed by adsorption as the water percolates through a large earth dam. Laboratory experiments were set up to identify which mineral is the most effective substrate for this adsorption of As. The experiments were conducted using infrared (IR) spectroscopy of thin mineral films adhering to a ZnSe prism. Silicates, including kaolinite, adsorbed only small amounts of As which was readily washed off. Hydrated Fe oxides (HFO) were extremely effective at adsorbing As, particularly the natural amorphous HFO currently being deposited from dam discharge waters at the Macraes mine. An adsorption isotherm determined for this natural material has the adsorption constant, Kads=(1.9±0.4)×104 M−1, and the substrate becomes saturated with adsorbed As when solution concentrations exceed about 50 mg l−1. Saturation is not being reached at the Macraes mine. Arsenic adsorbed on to natural HFO has a distinctive IR spectrum with the absorption peak varying from 800 cm−1 (alkaline solutions) to 820 cm−1 (neutral to acid solutions). Much of this adsorbed As is strongly bound and difficult to wash off. Arsenate ions adsorb in a bidentate structure which may be a precursor for scorodite crystallisation.  相似文献   

20.
《Applied Geochemistry》2002,17(5):517-568
The range of As concentrations found in natural waters is large, ranging from less than 0.5 μg l−1 to more than 5000 μg l−1. Typical concentrations in freshwater are less than 10 μg l−1 and frequently less than 1 μg l−1. Rarely, much higher concentrations are found, particularly in groundwater. In such areas, more than 10% of wells may be ‘affected’ (defined as those exceeding 50 μg l−1) and in the worst cases, this figure may exceed 90%. Well-known high-As groundwater areas have been found in Argentina, Chile, Mexico, China and Hungary, and more recently in West Bengal (India), Bangladesh and Vietnam. The scale of the problem in terms of population exposed to high As concentrations is greatest in the Bengal Basin with more than 40 million people drinking water containing ‘excessive’ As. These large-scale ‘natural’ As groundwater problem areas tend to be found in two types of environment: firstly, inland or closed basins in arid or semi-arid areas, and secondly, strongly reducing aquifers often derived from alluvium. Both environments tend to contain geologically young sediments and to be in flat, low-lying areas where groundwater flow is sluggish. Historically, these are poorly flushed aquifers and any As released from the sediments following burial has been able to accumulate in the groundwater. Arsenic-rich groundwaters are also found in geothermal areas and, on a more localised scale, in areas of mining activity and where oxidation of sulphide minerals has occurred. The As content of the aquifer materials in major problem aquifers does not appear to be exceptionally high, being normally in the range 1–20 mg kg−1. There appear to be two distinct ‘triggers’ that can lead to the release of As on a large scale. The first is the development of high pH (>8.5) conditions in semi-arid or arid environments usually as a result of the combined effects of mineral weathering and high evaporation rates. This pH change leads either to the desorption of adsorbed As (especially As(V) species) and a range of other anion-forming elements (V, B, F, Mo, Se and U) from mineral oxides, especially Fe oxides, or it prevents them from being adsorbed. The second trigger is the development of strongly reducing conditions at near-neutral pH values, leading to the desorption of As from mineral oxides and to the reductive dissolution of Fe and Mn oxides, also leading to As release. Iron (II) and As(III) are relatively abundant in these groundwaters and SO4 concentrations are small (typically 1 mg l−1 or less). Large concentrations of phosphate, bicarbonate, silicate and possibly organic matter can enhance the desorption of As because of competition for adsorption sites. A characteristic feature of high groundwater As areas is the large degree of spatial variability in As concentrations in the groundwaters. This means that it may be difficult, or impossible, to predict reliably the likely concentration of As in a particular well from the results of neighbouring wells and means that there is little alternative but to analyse each well. Arsenic-affected aquifers are restricted to certain environments and appear to be the exception rather than the rule. In most aquifers, the majority of wells are likely to be unaffected, even when, for example, they contain high concentrations of dissolved Fe.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号