共查询到20条相似文献，搜索用时 46 毫秒
1.
Summary. The crustal structure beneath the Vema fracture zone and its flanking transverse ridge was determined from seismic refraction profiles along the fracture zone valley and across the ridge. Relatively normal oceanic crust, but with an upwarped seismic Moho, was found under the transverse ridge. We suggest that the transverse ridge represents a portion of tectonically uplifted crust without a major root or zone of serpentinite diapirism beneath it. A region of anomalous crust associated with the fracture zone itself extends about 20 km to either side of the central fault, gradually decreasing in thickness as the fracture zone is approached. There is evidence to suggest that the thinnest crust is found beneath the edges of the 20 km wide fracture zone valley. Under the fracture zone valley the crust is generally thinner than normal oceanic crust and is also highly anomalous in its velocity structure. Seismic layer 3 is absent, and the seismic velocities are lower than normal. The absence of layer 3 indicates that normal magmatic accretionary processes are considerably modified in the vicinity of the transform fault. The low velocities are probably caused by the accumulation of rubble and talus and by the extensive faulting and fracturing associated with the transform fault. This same fracturing allows water to penetrate through the crust, and the apparently somewhat thicker crust beneath the central part of the fracture zone valley may be explained by the resultant serpentinization having depressed the seismic Moho below its original depth. 相似文献
2.
Thermal evolution of the oceanic crust; its dependence on spreading rate and effect on crustal structure 总被引：2，自引：0，他引：2
N. J. Kusznir 《Geophysical Journal International》1980,61(1):167-181
Summary. The temperature field and rates of cooling and solidification of the oceanic crust and upper mantle at an ocean ridge have been calculated as a function of spreading rate. The thermal model of the accretion process incorporates latent heat release associated with solidification of the basalt. liquid forming the ocean crust and uses a heat supply boundary condition on the vertical ridge axis model boundary. It is assumed that while oceanic layer 2 cools rapidly by hydrothermal circulation, oceanic layer 3 cools predominantly by conduction. Basalt liquid injection into the upper part of oceanic layer 3 is shown to solidify instantaneously while that injected into lower crustal levels takes up to 0.4 Myr to solidify. Material solidifying instantaneously is interpreted as corresponding to the dolerite unit of the ocean crust while that taking a finite time to cool is interpreted as corresponding to the gabbroic unit. The rate of cooling of the crust is shown to be faster for slower spreading rates and consequently the thicknesses of the dolerite and gabbro units are predicted to thin and thicken respectively with increase in spreading rate. The width of the molten region, or magma chamber, within the crust at the ridge axis is shown to be approximately proportional to spreading rate with chamber half widths of 1.5 and 10.0 km for half spreading rate of 1.0 and 6.0 cm yr−1 . Below a critical half spreading rate of about 0.65 cm yr−1 no molten region exists and the crust is entirely doleritic. 相似文献
3.
C. J. Greenroyd C. Peirce M. Rodger A. B. Watts R. W. Hobbs 《Geophysical Journal International》2007,169(3):964-987
Geophysical data from the Amazon Cone Experiment are used to determine the structure and evolution of the French Guiana and Northeast Brazil continental margin, and to better understand the origin and development of along-margin segmentation. A 427-km-long combined multichannel reflection and wide-angle refraction seismic profile acquired across the southern French Guiana margin is interpreted, where plate reconstructions suggest a rift-type setting.
The resulting model shows a crustal structure in which 35–37-km-thick pre-rift continental crust is thinned by a factor of 6.4 over a distance of ∼70 km associated with continental break-up and the initiation and establishment of seafloor spreading. The ocean–continent boundary is a transition zone up to 45 km in width, in which the two-layered oceanic-type crustal structure develops. Although relatively thin at 3.5–5.0 km, such thin oceanic crust appears characteristic of the margin as a whole.
There is no evidence of rift-related magmatism, either as seaward-dipping sequences in the reflection data or as a high velocity region in the lower crust in the P -wave velocity model, and as a such the margin is identified as non-volcanic in type. However, there is also no evidence of the rotated fault block and graben structures characteristic of rifted margins. Consequently, the thin oceanic crust, the rapidity of continental crustal thinning and the absence of characteristic rift-related structures leads to the conclusion that the southern French Guiana margin has instead developed in an oblique rift setting, in which transform motion also played a significant role in the evolution of the resulting crustal structure and along-margin segmentation in structural style. 相似文献
The resulting model shows a crustal structure in which 35–37-km-thick pre-rift continental crust is thinned by a factor of 6.4 over a distance of ∼70 km associated with continental break-up and the initiation and establishment of seafloor spreading. The ocean–continent boundary is a transition zone up to 45 km in width, in which the two-layered oceanic-type crustal structure develops. Although relatively thin at 3.5–5.0 km, such thin oceanic crust appears characteristic of the margin as a whole.
There is no evidence of rift-related magmatism, either as seaward-dipping sequences in the reflection data or as a high velocity region in the lower crust in the P -wave velocity model, and as a such the margin is identified as non-volcanic in type. However, there is also no evidence of the rotated fault block and graben structures characteristic of rifted margins. Consequently, the thin oceanic crust, the rapidity of continental crustal thinning and the absence of characteristic rift-related structures leads to the conclusion that the southern French Guiana margin has instead developed in an oblique rift setting, in which transform motion also played a significant role in the evolution of the resulting crustal structure and along-margin segmentation in structural style. 相似文献
4.
T. A. Minshull 《Geophysical Journal International》1999,136(1):286-290
Seismic reflection profiles from Mesozoic oceanic crust around the Blake Spur Fracture Zone (BSFZ) in the western North Atlantic have been widely used in constraining tectonic models of slow-spreading mid-ocean ridges. These profiles have anomalously low basement relief compared to crust formed more recently at the Mid-Atlantic Ridge at the same spreading rate. Profiles from other regions of Mesozoic oceanic crust also have greater relief. The anomalous basement relief and slightly increased crustal thickness in the BSFZ survey area may be due to the presence of a mantle thermal anomaly close to the ridge axis at the time of crustal formation. If so, the intracrustal structures observed may be representative of an atypical tectonic regime. 相似文献
5.
Alejandra L. Cameselle César R. Ranero Dieter Franke Udo Barckhausen 《Basin Research》2017,29(Z1):73-95
Rifted margins are created as a result of stretching and breakup of continental lithosphere that eventually leads to oceanic spreading and formation of a new oceanic basin. A cornerstone for understanding what processes control the final transition to seafloor spreading is the nature of the continent‐ocean transition (COT). We reprocessed multichannel seismic profiles and use available gravity data to study the structure and variability of the COT along the Northwest subbasin (NWSB) of the South China Sea. We have interpreted the seismic images to discern continental from oceanic domains. The continental‐crust domain is characterized by tilted fault blocks generally overlain by thick syn‐rift sedimentary units, and underlain by fairly continuous Moho reflections typically at 8–10 s twtt. The thickness of the continental crust changes greatly across the basin, from ~20 to 25 km under the shelf and uppermost slope, to ~9–6 km under the lower slope. The oceanic‐crust domain is characterized by a highly reflective top of basement, little faulting, no syntectonic strata and fairly constant thickness (over tens to hundreds of km) of typically 6 km, but ranging from 4 to 8 km. The COT is imaged as a ~5–10 km wide zone where oceanic‐type features directly abut or lap on continental‐type structures. The South China margin continental crust is cut by abundant normal faults. Seismic profiles show an along‐strike variation in the tectonic structure of the continental margin. The NE‐most lines display ~20–40 km wide segments of intense faulting under the slope and associated continental‐crust thinning, giving way to a narrow COT and oceanic crust. Towards the SW, faulting and thinning of the continental crust occurs across a ~100–110 km wide segment with a narrow COT and abutting oceanic crust. We interpret this 3D structural variability and the narrow COT as a consequence of the abrupt termination of continental rifting tectonics by the NE to SW propagation of a spreading centre. We suggest that breakup occurred abruptly by spreading centre propagation rather than by thinning during continental rifting. We propose a kinematic evolution for the oceanic domain of the NWSB consisting of a southward spreading centre propagation followed by a first narrow ridge jump to the north, and then a younger larger jump to the SE, to abandon the NWSB and create the East subbasin of the South China Sea. 相似文献
6.
Summary. The Nootka fault zone is the boundary between the small Explorer and Juan de Fuca plates which are situated between the America and Pacific plates off western Canada. To investigate the crustal structure in the region, three explosive/large airgun refraction lines were shot into three ocean bottom seismometers (OBSs) with three-component geophone assemblies. In this phase of the study, P -wave velocity—depth models are interpreted by comparison of the travel time and amplitude characteristics of the observed data with theoretical seismograms computed using a WKBJ algorithm. The interpretation gives relatively consistent results for the upper crust. However, the structure of the lower crust is significantly different among the various profiles. Upper mantle velocities range from 7.5 to 8.3 kms−1 and the sub-bottom crustal thickness vanes from 6.4 to 11 km. Nevertheless, these seismic models are consistent in general terms with oceanic crustal models represented by ophiolite complexes. Some aspects of the differences among profiles can be explained by consideration of a recent tectonic model for the development of the fault zone. This requires, within a 1 Myr time interval, variations in the process of crustal formation at the ridge, crustal 'maturing', or both. The abnormally thick crust near a spreading centre may result in part from the complex interaction of the Juan de Fuca and Explorer plates with the larger and older America and Pacific plates. Upper mantle velocity variations are consistent with the concept of velocity anisotropy. The different record sections show that seismic energy is attenuated for ray paths traversing the Nootka fault zone. 相似文献
7.
Summary. In order to examine the development of the oceanic crust in the neighbourhood of a slowly spreading ridge, a seismic refraction experiment was carried out at 59° 30'N on the Reykjanes Ridge. Three 120 km long overlapped split profiles were shot parallel to the trend of the ridge, on the eastern flank, and recorded on up to five recording sonobuoys. The profiles were at distances of 0, 30 and 90km from the ridge axis, corresponding to approximate crustal ages of 0, 3 and 9 Myr. Data from the main profiles were supplemented by using a large chamber air gun during recovery of the buoys.
The analysis of the data combined standard travel-time interpretation, the 'tau' method of systematic travel-time inversion and detailed amplitude modelling using the Reflectivity Method to calculate synthetic seismograms. Detailed velocity-depth models were constructed for each of the profiles.
There is no indication of a significant magma chamber at the ridge crest, although a slight velocity inversion in layer 3 suggests a zone of elevated temperature. Away from the crest there was a slight positive velocity gradient in layer 3. Layer 2 was most effectively modelled by a region of varying velocity gradients, which thinned with age and the transition to layer 3 is marked by a sharp change in velocity gradient. The transition to mantle velocities is also best modelled by a high velocity gradient rather than an interface.
Although some lateral variation in properties is apparent along the profiles, the lateral velocity gradients were sufficiently weak to allow an effective analysis in terms of laterally uniform models. 相似文献
The analysis of the data combined standard travel-time interpretation, the 'tau' method of systematic travel-time inversion and detailed amplitude modelling using the Reflectivity Method to calculate synthetic seismograms. Detailed velocity-depth models were constructed for each of the profiles.
There is no indication of a significant magma chamber at the ridge crest, although a slight velocity inversion in layer 3 suggests a zone of elevated temperature. Away from the crest there was a slight positive velocity gradient in layer 3. Layer 2 was most effectively modelled by a region of varying velocity gradients, which thinned with age and the transition to layer 3 is marked by a sharp change in velocity gradient. The transition to mantle velocities is also best modelled by a high velocity gradient rather than an interface.
Although some lateral variation in properties is apparent along the profiles, the lateral velocity gradients were sufficiently weak to allow an effective analysis in terms of laterally uniform models. 相似文献
8.
K. Douglas Nelson 《Geophysical Journal International》1981,65(1):19-30
Summary. A simple dynamic model, based on the geometry of mantle divergence and thermal parameters controlling equilibrium size of the axial magma chamber, explains the variation in topography along mid-ocean ridges. Among morphological characters accounted for are: (1) the change from axial-valley to axial-high type ridge crests with increasing spreading rate, (2) the localized occurrence of deeps at ridge-transform intersections, and (3) the correlation of average transform spacing with spreading rate. The model also yields an explanation for anomalous ridge topography associated with oceanic hot spots. Incorporation of smaller-scale bathymetric and ophiolite data into this scheme permits construction of a comprehensive model of ocean crust accretion. 相似文献
9.
Jean-Christophe Sempere Ken C. Macdonald Stephen P. Miller 《Geophysical Journal International》1984,79(3):799-811
Summary. Overlapping spreading centres (OSCs) represent a new type of plate boundary interaction in which en échelon rise segments overlap significantly and are not joined by a transform fault.
A three-dimensional Fourier inversion of the magnetic field was performed on an overlapping spreading centre to remove the effects of topography and ridge orientation. A magnetic high exists at the tip of one of the two ridge segments. Forward modelling suggests that the anomalous magnetic field cannot be attributed to the effects of topography alone. The inversion reveals the existence of a magnetization high at the tip of the eastern spreading centre. Maximum magnetization values are consistent with ones obtained in other high amplitude zones in the Pacific as well as with the measured magnetization of samples dredged in the same areas. We suggest that the magnetization high over the eastern ridge tip of the 9°03'N OSC is associated with highly evolved basalts enriched in iron and titanium. Such enrichment may be caused by enhanced crystal fractionation within an axial magma chamber which is intermittent and occasionally freezes as the eastern spreading axis propagates into older lithosphere. 相似文献
A three-dimensional Fourier inversion of the magnetic field was performed on an overlapping spreading centre to remove the effects of topography and ridge orientation. A magnetic high exists at the tip of one of the two ridge segments. Forward modelling suggests that the anomalous magnetic field cannot be attributed to the effects of topography alone. The inversion reveals the existence of a magnetization high at the tip of the eastern spreading centre. Maximum magnetization values are consistent with ones obtained in other high amplitude zones in the Pacific as well as with the measured magnetization of samples dredged in the same areas. We suggest that the magnetization high over the eastern ridge tip of the 9°03'N OSC is associated with highly evolved basalts enriched in iron and titanium. Such enrichment may be caused by enhanced crystal fractionation within an axial magma chamber which is intermittent and occasionally freezes as the eastern spreading axis propagates into older lithosphere. 相似文献
10.
Marek Grad 《Geophysical Journal International》1984,79(1):353-361
Summary. The paper presents the results of modelling of diffracted and reflected-diffracted waves in fracture zones. The Berryhill method was used and the calculations were made for a profile perpendicular to the diffracting edge. Several homogeneous models of the Earth's crust, characterized by different values of crustal thickness, velocity and horizontal distance between shot point and diffracting edge were considered. A dependence of the relative amplitude of diffracted waves on the location of the diffracting edge is given. The pattern of the seismic wavefield depends upon the dimensions of the fracture zone. Amplitude curves of reflected-diffracted waves are presented for a series of models of fracture zones. The possibility of applying the amplitudes of reflected-diffracted wave trains to the interpretation of the structure of fracture zones in the Earth's crust is andysed for different types of fracture zones. 相似文献
11.
Jeremy Duschenes R. C. Lilwall T. J. G. Francis 《Geophysical Journal International》1983,72(2):435-451
Summary. The ability to locate the hypocentres of earthquakes occurring along ridge crests and fracture zones accurately is a prerequisite to solving several problems associated with seafloor tectonics and oceanic crustal formation. Such resolution has rarely been achieved in the past, often because the seismic networks deployed were inadequate for the task. We demonstrate that sea surface receivers are not useful in such studies, and that the minimum acceptable size for a seafloor network is five receivers, of which at least one must be capable of detecting shear waves unambiguously. 相似文献
12.
Interpretation of long‐offset 2D depth‐imaged seismic data suggests that outer continental margins collapse and tilt basinward rapidly as rifting yields to seafloor spreading and thermal subsidence of the margin. This collapse post‐dates rifting and stretching of the crust, but occurs roughly ten times faster than thermal subsidence of young oceanic crust, and thus is tectonic and pre‐dates the ‘drift stage’. We term this middle stage of margin development ‘outer margin collapse’, and it accords with the exhumation stage of other authors. Outer continental margins, already thinned by rifting processes, become hanging walls of crustal‐scale half grabens associated with landward‐dipping shear zones and zones of low‐shear strength magma at the base of the thinned crust. The footwalls of the shear zones comprise serpentinized sub‐continental mantle that commonly becomes exhumed from beneath the embrittled continental margin. At magma‐poor margins, outer continental margins collapse and tilt basinward to depths of about 3 km subsea at the continent–ocean transition, often deeper than the adjacent oceanic crust (accreted later between 2 and 3 km). We use the term ‘collapse’ because of the apparent rapidity of deepening (<3 Myr). Rapid salt deposition, clastic sedimentation (deltaic), or magmatism (magmatic margins) may accompany collapse, with salt thicknesses reaching 5 km and volcanic piles 1525 km. This mechanism of rapid salt deposition allows mega‐salt basins to be deposited on end‐rift unconformities at global sea level, as opposed to deep, air‐filled sub‐sea depressions. Outer marginal collapse is ‘post‐rift’ from the perspective of faulting in the continental crust, but of tectonic, not of thermal, origin. Although this appears to be a global process, the Gulf of Mexico is an excellent example because regional stratigraphic and structural relations indicate that the pre‐salt rift basin was filled to sea level by syn‐rift strata, which helps to calibrate the rate and magnitude of collapse. We examine the role of outer marginal detachments in the formation of East India, southern Brazil and the Gulf of Mexico, and how outer marginal collapse can migrate diachronously along strike, much like the onset of seafloor spreading. We suggest that backstripping estimates of lithospheric thinning (beta factor) at outer continental margins may be excessive because they probably attribute marginal collapse to thermal subsidence. 相似文献
13.
K. W. Helen Lau Keith E. Louden Sharon Deemer Jeremy Hall John R. Hopper Brian E. Tucholke W. Steven Holbrook Hans Christian Larsen † 《Geophysical Journal International》2006,167(1):157-170
New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins. 相似文献
14.
Expanding spread profile at the northern Jan Mayen Ridge 总被引：1，自引：0，他引：1
An expanding spread seismic profile at the central northern Jan Mayen Ridge, ESP-5, has yielded a crustal seismic velocity distribution which is similar to observations from the thinned continental crust at the Norwegian continental margin. The profile reveals a post-early Eocene sedimentary sequence, about 1. 5 km thick, overlying 1 km of volcanic extrusives and interbedded sediments. Below, there are about 3 km of pre-opening sediments above the seismic basement. The results indicate that the main ridge block is underlain by a thinned crust, possibly only 13.5 km thick. The results are compatible with a continental nature for the main ridge complex. 相似文献
15.
Hatton Bank (northwest U.K.) continental margin structure 总被引：1，自引：0，他引：1
R.S. White G. K. Westbrook S.R. Fowler G.D. Spence P.J. Barton M. Joppen J. Morgan A.N. Bowen C. Prestcott M.H.P. Bott 《Geophysical Journal International》1987,89(1):265-272
Summary. The continent-ocean transition near Hatton Bank was studied using a dense grid of single-ship and two-ship multichannel seismic (mcs) profiles. Extensive oceanward dipping reflectors in a sequence of igneous rocks are developed in the upper crust across the entire margin. At the landward (shallowest) end the dipping reflectors overlie continental crust, while at the seaward end they are formed above oceanic crust. Beneath the central and lower part of the margin is a mid-crustal layer approximately 5 km thick that could be either stretched and thinned continental crust or maybe newly formed igneous crust generated at the same time as the dipping reflector sequence. Beneath this mid-crustal layer and above a well defined seismic Moho which rises from 27 km (continental end) to 15 km (oceanic end) across the margin, the present lower crust comprises a 10–15 km thick lens of material with a seismic velocity of 7.3 to 7.4 km/s. We interpret the present lower crustal lens as underplated igneous rocks left after extraction of the extruded basaltic lavas, A considerable quantity of new material has been added to the crust under the rifted margin. The present Moho is a new boundary formed during creation of the margin and cannot, therefore, be used to determine the amount of thinning. 相似文献
16.
David M. Fountain Daniel T. McDonough Julie M. Gorham 《Geophysical Journal International》1987,89(1):61-66
Summary. Laboratory seismic velocity measurements on rock samples from metamorphic terrains, coupled with geologic cross sections, provide the basis for synthetic seismic reflection profiles for various types of continental crust. Results from greenstone belts, mylonite zones and partial cross sections of continental crust indicate that lithologic heterogeneity and geometrical factors control crustal reflection characteristics. 相似文献
17.
Recent seismic field work has revealed high lower-crustal velocities under Ninetyeast Ridge, Indian Ocean, indicating the presence of crustal underplating ( Grevemeyer et al . 2000 ). We used results from Ocean Drilling Program (ODP) drill cores and cross-spectral analysis of gravity and bathymetric data to study the impact of the underplating body on the subsidence history and the mode of isostatic compensation along Ninetyeast Ridge. Compared with the adjacent Indian basin, the subsidence of Ninetyeast Ridge is profoundly anomalous. Within the first few millions of years after crustal emplacement the ridge subsided rapidly. Thereafter, however, subsidence slowed down significantly. The most reliable model of isostasy suggests loading of a thin elastic plate on and beneath the seafloor. Isostatic compensation of subsurface loading occurs at a depth of about 25 km, which is in reasonably good agreement with seismic constraints. Subsurface loading is inherently associated with buoyant forces acting on the lithosphere. The low subsidence may therefore be the superposition of cooling of the lithosphere and uplift due to buoyant material added at the base of the crust. A model including prolonged crustal growth in the form of subcrustal plutonism may account for all observations. 相似文献
18.
Large Igneous Provinces (LIP) are of great interest due to their role in crustal generation, magmatic processes and environmental impact. The Agulhas Plateau in the southwest Indian Ocean off South Africa has played a controversial role in this discussion due to unclear evidence for its continental or oceanic crustal affinity. With new geophysical data from seismic refraction and reflection profiling, we are able to present improved evidence for its crustal structure and composition. The velocity–depth model reveals a mean crustal thickness of 20 km with a maximum of 24 km, where three major units can be identified in the crust. In our seismic reflection records, evidence for volcanic flows on the Agulhas Plateau can be observed. The middle crust is thickened by magmatic intrusions. The up to 10 km thick lower crustal body is characterized by high seismic velocities of 7.0–7.6 km s−1 . The velocity–depth distribution suggests that the plateau consists of overthickened oceanic crust similar to other oceanic LIPs such as the Ontong-Java Plateau or the northern Kerguelen Plateau. The total volume of the Agulhas Plateau was estimated to be 4 × 106 km3 of which about 10 per cent consists of extruded igneous material. We use this information to obtain a first estimate on carbon dioxide and sulphur dioxide emission caused by degassing from this material. The Agulhas Plateau was formed as part of a larger LIP consisting of the Agulhas Plateau itself, Northeast Georgia Rise and Maud Rise. The formation time of this LIP can be estimated between 100 and 94 (± 5) Ma. 相似文献
19.
We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50 s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18 km in the Norwegian Sea area and 9 km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9 km s−1 for most paths. An average lithospheric thickness of 60 km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30 km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region. 相似文献
20.
G. R. Foulger 《Geophysical Journal International》2006,165(2):672-676
The oldest rocks outcropping in northwest Iceland are ∼16 Myr old and in east Iceland ∼13 Myr. The full plate spreading rate in this region during the Cenozoic has been ∼2 cm a−1 , and thus these rocks are expected to be separated by ∼290 km. They are, however, ∼500 km apart. The conclusion is inescapable that an expanse of older crust ∼210 km wide underlies Iceland, submerged beneath younger lavas. This conclusion is independent of any considerations regarding spreading ridge migrations, jumps, the simultaneous existence of multiple active ridges, three-dimensionality, or subsidence of the lava pile. Such complexities bear on the distribution and age of the older crust, but not on its existence or its width. If it is entirely oceanic its maximum age is most likely 26–37 Ma. It is at least 150 km in north–south extent, but may taper and extend beneath south Iceland. Part of it might be continental—a southerly extension of the Jan Mayen microcontinent. This older crust contributes significantly to crustal thickness beneath Iceland and the ∼40 km local thickness measured seismically is thus probably an overestimate of present-day steady-state crustal production at Iceland. 相似文献