首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
We adopted the seismic tomography technique to refine the three-dimensional velocity structure model of the western part of Hokkaido, Japan. Using the P-wave first arrival data listed by Japan Meteorological Agency from 2002 to 2005, we could estimate a 3-D inhomogeneous velocity structure model with a low velocity at a depth of 14 km beneath Asahikawa. The crustal structure near Sapporo was characterized by lateral velocity change toward the southern seaside. The low-velocity zone near Urakawa, proposed by previous research, was also clarified. In general, the present model showed lower-velocity values for most of the crustal layers in the area concerned. The results of this study were affected by less number of higher magnitude events (M?≥?0.5) in the central part of the area of interest. However, the perturbation results for comparatively shallow layers (6–50 km) were good in resolution. It was found that the source region of the Rumoi–Nanbu earthquake of December 14, 2004 was characterized by a low-velocity zone, located between high velocity zones. Such an inhomogeneous crustal structure might play an important role in the relatively high seismic activity in the Rumoi–Nanbu earthquake source region.  相似文献   

2.
We use seismic tomography, exploiting group velocities derived from ambient noise, to delineate the crustal structure beneath Mt Isa and the surrounding blocks and basins. The depth extent of the blocks can be traced into the mid-crust and the spatial extent of the associated velocity anomalies mapped over an area of approximately 500 km by 500 km. The Proterozoic Mt Isa block is imaged as a region of elevated seismic velocities comparable to the Yilgarn craton in Western Australia, while the surrounding basins have relatively low velocities. Seismic velocity anomalies display correlations with the regional Bouguer gravity data and with high crustal temperatures in the region. There are a number of isolated low-velocity anomalies under the Millungera basin that suggest either previously unknown thermal anomalies or zones with high permeability, which can also produce lowered velocities.  相似文献   

3.
In order to constrain the crustal wave velocity structure in the southern Tibetan crust and provide insight into the contribution of crustal composition, geothermal gradient and partial melting to the velocity structure, which is characterized by low average crustal velocities and widespread presence of low-velocity zone(s), the authors model the crustal velocity and density as functions of depth corresponding to various heat flow values in light of velocity measurements at high temperature and high pressure. The modeled velocity and density are regarded as comparison standards. The comparison of the standards with seismic observations in southern Tibet implies that the predominantly felsic composition at high heat flow cannot explain the observed velocity structure there. Hence, the authors are in favor of attributing low average crustal velocities and low-velocity zone(s) observed in southern Tibet mainly to partial melting. Modeling based on the experimental results suggests that a melting percentage  相似文献   

4.
Shear wave velocities of the lithospheric structure to 73 km depth have been defined along three profiles crossing the Campanian Plain (Southern Italy) from the simultaneous non linear inversion of the local and regional dispersion data. The former consist of group velocity dispersion data obtained from some seismic events which occurred at the borders of the Campanian Plain and recorded at Napoli, and the latter of group and phase dispersion data obtained in previous studies. The main features of the representative VS models are a carbonate basement deepening to ～5 km in the central part of the Plain and a low velocity zone at a depth of ～15 km, rising to 7 km in the southern part, close to Somma-Vesuvio. The low velocity layer can be correlated with that found at ～10 km of depth below Campi Flegrei and the Neapolitan area, and at 5 km below the Somma-Vesuvio caldera area. Such regional velocity reduction can be associated to the presence of a zone with less than 5% partial melting that can be interpreted as magmatic reservoir of the Campanian volcanism.  相似文献   

5.
The upper-mantle structure was studied from first-arrival data along the Meteorite profile, run using underground nuclear explosions. Unlike the layered, slightly inhomogeneous models in the previous works, emphasis was laid on lateral inhomogeneity at the minimum possible number of abrupt seismic boundaries. We used forward ray tracing of the traveltimes of refracted and overcritical reflected waves. The model obtained is characterized by considerable velocity variations, from 7.7 km/s in the Baikal Rift Zone to 8.0–8.45 km/s beneath the Tunguska syneclise. A layer of increased velocity (up to 8.5–8.6 km/s), 30–80 km thick, is distinguished at the base of seismic lithosphere. The depth of the layer top varies from 120 km in the northern Siberian craton to 210 km in its southeastern framing. It has been shown that, with crustal density anomalies excluded, the reduced gravity field is consistent with the upper-mantle velocity model.  相似文献   

6.
A two-dimensional model of the crust and uppermost mantle for the western Siberian craton and the adjoining areas of the Pur-Gedan basin to the north and Baikal Rift zone to the south is determined from travel time data from recordings of 30 chemical explosions and three nuclear explosions along the RIFT deep seismic sounding profile. This velocity model shows strong lateral variations in the crust and sub-Moho structure both within the craton and between the craton and the surrounding region. The Pur-Gedan basin has a 15-km thick, low-velocity sediment layer overlying a 25-km thick, high-velocity crystalline crustal layer. A paleo-rift zone with a graben-like structure in the basement and a high-velocity crustal intrusion or mantle upward exists beneath the southern part of the Pur-Gedan basin. The sedimentary layer is thin or non-existent and there is a velocity reversal in the upper crust beneath the Yenisey Zone. The Siberian craton has nearly uniform crustal thickness of 40–43 km but the average velocity in the lower crust in the north is higher (6.8–6.9 km/s) than in the south (6.6 km/s). The crust beneath the Baikal Rift zone is 35 km thick and has an average crustal velocity similar to that observed beneath the southern part of craton. The uppermost mantle velocity varies from 8.0 to 8.1 km/s beneath the young West Siberian platform and Baikal Rift zone to 8.1–8.5 km/s beneath the Siberian craton. Anomalous high Pn velocities (8.4–8.5 km/s) are observed beneath the western Tunguss basin in the northern part of the craton and beneath the southern part of the Siberian craton, but lower Pn velocities (8.1 km/s) are observed beneath the Low Angara basin in the central part of the craton. At about 100 km depth beneath the craton, there is a velocity inversion with a strong reflecting interface at its base. Some reflectors are also distinguished within the upper mantle at depth between 230 and 350 km.  相似文献   

7.
The crustal structure of the central Eromanga Basin in the northern part of the Australian Tasman Geosyncline, revealed by coincident seismic reflection and refraction shooting, contrasts with some neighbouring regions of the continent. The depth to the crust-mantle boundary (Moho) of 36–41 km is much less than that under the North Australian Craton to the northwest (50–55 km) and the Lachlan Fold Belt to the southeast (43–51 km) but is similar to that under the Drummond and Bowen Basins to the east.The seismic velocity boundaries within the crust are sharp compared with the transitional nature of the boundaries under the North Australian and Lachlan provinces. In particular, there is a sharp velocity increase at mid-crustal depths (21–24 km) which has not been observed with such clarity elsewhere in Australia (the Conrad discontinuity?).In the lower crust, the many discontinuous sub-horizontal reflections are in marked contrast to lack of reflecting horizons in the upper crust, further emphasising the differences between the upper and lower crust. The crust-mantle boundary (Moho) is characterised by an increase in velocity from 7.1–7.7 km/s to a value of 8.15 + 0.04 km/s. The depth to the Moho under the Canaway Ridge, a prominent basement high, is shallower by about 5 km than the regional Moho depth; there is also no mid-crustal horizon under the Canaway Ridge but there is a very sharp velocity increase at the Moho depth of 34 km. The Ridge could be interpreted as a horst structure extending to at least Moho depths but it could also have a different intra-crustal structure from the surrounding area.The sub-crustal lithosphere has features which have been interpreted, from limited data, as being caused by a velocity gradient at 56–57 km depth with a low velocity zone above it.Because of the contrasting crustal thicknesses and velocity gradients, the lithosphere of the central Eromanga Basin cannot be considered as an extension of the exposed Lachlan Fold Belt or the North Australian Craton. The lack of seismic reflections from the upper crust indicates no coherent accoustic impedance pattern at wavelengths greater than 100 m, consistent with an upper crustal basement of tightly folded meta-sedimentary and meta-volcanic rocks. The crustal structure is consistent with a pericratonic or arc/back-arc basin being cratonised in an episode of convergent tectonics in the Early Palaeozoic. The seismic reflections from the lower crust indicate that it could have developed in a different tectonic environment.  相似文献   

8.
Abdullh M.S. Al-Amri   《Tectonophysics》1998,290(3-4):271-283
The crustal structure of the western Arabian platform is derived using the spectral analysis of long-period P-wave amplitude ratios. The ratio of the vertical to the horizontal component is used to obtain the crustal transfer function based on thickness variations, crustal velocities, densities and the angle of emergence at the lower crust and upper mantle interface. Eleven well-defined earthquakes recorded at the long-period RYD station during the period from 1985 to 1994 were selected for analysis based on the following criteria: focal depths with a range between 7 and 89 km, body-wave magnitudes greater than 4.7, epicentral distances with a range from 8.8° to 26.5°, and back azimuthal coverage from 196° to 340°. Spectral analysis calculations were based on the comparison of the observed spectral ratios with those computed from theoretical P-wave motion obtained using the Thomson–Haskell matrix formulation for horizontally layered crustal models. The selection of the most suitable model was based on the identification of the theoretical model which exhibits the highest cross-correlation coefficient with the observed transfer function ratio. By comparing the spectral peak positions of the observed and theoretical values, the thickness and velocity can be resolved within 3 km and 1 km/s, respectively, of the observed values. The spectral analysis of long-period P-waves can detect a thin layer near the surface of about 1.6 km thick and a velocity contrast of about 10% with that of the underlying layer. A strong velocity gradient of about 0.05 km/s per km was found in the upper crust and 0.02 km/s per km in the lower crust. The derived crustal model is not unique due to the theoretical assumptions (horizontal layering, constant densities and velocities in each layer), quality of the data and complexities of the crustal structure. The crustal model suggests that the crust consists of five distinct layers. The upper crustal layer has a P-wave velocity of about 5.6 km/s and is about 1.6 km thick. The second layer has a velocity of about 6.2 km/s and is 10.2 km thick. The third layer shows a velocity of 6.6 km/s and is 6.8 km thick. The fourth layer has a velocity of about 6.8 km/s and is 12.3 km thick. The lower crustal layer has a velocity of about 7.5 km/s and is 9.3 km thick. The Mohorovicic discontinuity beneath the western Arabian platform indicates a velocity of 8.2 km/s of the upper mantle and 42 km depth.  相似文献   

9.
Explosion seismic experiments, gravity measurements and aeromagnetic surveys were made in the northern Mizuho Plateau including the Ongul Islands, East Antarctica, from 1979 to 1982 by the Japanese Antarctic Research Expeditions. The objective of these field operations was to determine the crustal structure along the 300 km-long oversnow traverse route between Syowa and Mizuho Stations. Three big shots were fired; at sea near Syowa Station, in an ice hole near Mizuho Station and in an ice hole between both stations. Twenty-seven temporal seismic stations were set up along the route. Gravity measurements were carried out at 30 points along this route. Aeromagnetic surveys over the area were made four times.In the seismic experiments, clear refracted waves from the Conrad (estimated depth 30 km) and the Moho (estimated depth 40 km) discontinuities were recorded. No layer with a velocity of less than 6 km/s was found in the Ongul Islands nor beneath the ice sheet in the surveyed area. The P-wave velocity in the upper layer varies with depth from 6.0 km/s on the surface to 6.4 km/s at a depth of 13 km. Comparing the observed record section with synthetic seismograms, it was derived that the Conrad was not associated with a sharp velocity discontinuity, but a linear velocity increase of 0.55 km/s in a transition zone of 2.4 km thick. Velocities of P* and Pn were determined as 6.95 km/s and 7.93 km/s assuming a flat layered structure.Bouguer gravity anomalies could not be calculated along the whole profile because of a lack of data on bedrock topography, so reduced gravity anomalies were calculated. These anomalies indicate no abrupt changes of the bedrock topography.  相似文献   

10.
Due to its geological and economic importance, the Zagros Mountains have been investigated by many researchers during the last decades. Nevertheless, in spite of all the studies conducted on the region, there are still some controversial problems concerning the structure of the Zagros Mountains, including crustal depths, demanding more insights into understanding the crustal constraints of the region. Accordingly, we have conducted a gravity study to determine Moho depth map of the Zagros Mountains region, including its major structural domains from the coastal plain of the Persian Gulf to central Iran. The employed data are the densest and most accurate terrestrial gravity data set observed until now with the precision of 5 μGal and resolution of 5 arc-minute by 5 arc-minute. To image Moho depth variations, gravity inversion software GROWTH2.0 is used, proposing the possibility to model stratified structures by means of a semi-objective exploratory 3D inversion approach. The obtained results reveal the crustal thickness of ~?30–35 km underneath the southwestern most Zagros Fold-Thrust Belt increasing northeastward to 48 km. The maximum Moho depth is estimated ~?62 km below the Zagros Mountains belt along the Main Zagros Thrust. Northeast of the study area, an average crustal thickness of 46 km is computed beneath Urumieh–Dokhtar magmatic arc and central Iran.  相似文献   

11.
This paper reports the results of 3-D tomographic modelling of crustal structure in the Trans European Suture Zone region (TESZ) of Poland, eastern Germany and Lithuania. The data are the product of a large-scale seismic experiment POLONAISE'97, which was carried out in 1997. This experiment was designed to provide some 3-D coverage. The TESZ forms the boundary between the Precambrian crustal terranes of the East European Craton (EEC) and the younger Phanerozoic terranes to the southwest. The 3-D results generally confirm the earth models derived by earlier 2-D analyses, but also add some important details as well as a 3-D perspective on the structure. The velocity model obtained shows substantial horizontal variations of crustal structure across the study area. Seismic modelling shows low (<6.1 km/s) velocities suggesting the presence of sedimentary rocks down to a depth of about 20 km in the Polish basin. The shape of the basin in the vicinity of the profile P4 shows significant asymmetry. Three-dimensional modelling also allowed tracing of horizontal irregularities of the basin shape as well as variations of the Moho depth not only along profiles, but also between them. The slice between P2 and P4 profiles shows about 10-km variations of the Moho over a 100-km interval. The crustal thickness varies from about 30 km in SW, beneath the Palaeozoic platform, to about 42 km beneath East European Craton in NE. High seismic velocities of about 6.6 km/s were found in the depth range 2–10 km, which coincides with K trzyn anorthosite massif. The results of this 3-D seismic modelling of the POLONAISE'97 data will ultimately be supplemented by inversion of seismic data from previous experiments.  相似文献   

12.
The Lachlan Fold Belt has the velocity‐depth structure of continental crust, with a thickness exceeding 50 km under the region of highest topography in Australia, and in the range 41–44 km under the central Fold Belt and Sydney Basin. There is no evidence of high upper crustal velocities normally associated with marginal or back‐arc basin crustal rocks. The velocities in the lower crust are consistent with an overall increase in metamorphic grade and/or mafic mineral content with depth. Continuing tectonic development throughout the region and the negligible seismicity at depths greater than 30 km indicate that the lower crust is undergoing ductile deformation.

The upper crustal velocities below the Sydney Basin are in the range 5.75–5.9 km/s to about 8 km, increasing to 6.35–6.5 km/s at about 15–17 km depth, where there is a high‐velocity (7.0 km/s) zone for about 9 km evident in results from one direction. The lower crust is characterised by a velocity gradient from about 6.7 km/s at 25 km, to 7.7 km/s at 40–42 km, and a transition to an upper mantle velocity of 8.03–8.12 km/s at 41.5–43.5 km depth.

Across the central Lachlan Fold Belt, velocities generally increase from 5.6 km/s at the surface to 6.0 km/s at 14.5 km depth, with a higher‐velocity zone (5.95 km/s) in the depth range 2.5–7.0 km. In the lower crust, velocities increase from 6.3 km/s at 16 km depth to 7.2 km/s at 40 km depth, then increase to 7.95 km/s at 43 km. A steeper gradient is evident at 26.5–28 km depth, where the velocity is about 6.6—6.8 km/s. Under part of the area an upper mantle low‐velocity zone in the depth range 50–64 km is interpreted from strong events recorded at distances greater than 320 km.

There is no substantial difference in the Moho depth across the boundary between the Sydney Basin and the Lachlan Fold Belt, consistent with the Basin overlying part of the Fold Belt. Pre‐Ordovician rocks within the crust suggest fragmented continental‐type crust existed E of the Precambrian craton and that these contribute to the thick crustal section in SE Australia.  相似文献   

13.
Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

14.
鄂尔多斯地块南缘地应力测量研究   总被引：2，自引：2，他引：0  
利用水压致裂法得到的地应力测试数据对鄂尔多斯地块南缘地壳浅部地应力分布规律及断层活动性进行研究。结果表明:（1）两个水平主应力随深度线性增长,应力梯度分别为0.032和0.021,在测量深度域内水平和垂直应力的关系为SH > Sh > SV,该应力状态有利于断层发生逆断层活动,与1556年华山大地震的发震正断层的性质不同;（2）研究区的最大水平主应力方向为北南-北北西向,与区域速度矢量场方向一致,与其他资料解译的区域构造应力方向有一些差异,主要是受鄂尔多斯地块周缘断层活动的影响;（3）利用Mohr-Coulomb准则及Byerlee定律,摩擦系数取0.6~1.0,对研究区的地应力状态进行分析,发现鄂尔多斯地块南缘的测点未达到或超过地壳破裂极限状态,不存在断层失稳或地震等其他形式的地壳活动,处于较稳定地壳应力状态;（4）实测数据为该区补充了新的地应力测量资料,研究结果为该区工程设计及建设、构造应力场数值模拟提供了边界条件,对于该区地质灾害评价、地壳稳定性以及大陆动力学的研究具有重要意义。   相似文献   

15.
On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geotherms for each grid is established for P-T correction on P-wave velocities. The average depths of sub-crustal layers and their average P-wave velocities of 18 tectonic units in eastern China are exhibited. Our result presents a 32-34 km thick crust beneath eastern China, which is thinner than previous studies, with an average velocity of 6.54 km/s, corresponding to a 5 kg/m3 variation in crustal mean density. The thicker upper but thinner middle and lower crust results in a lower average seismic velocity of eastern China. An intermediate crustal composition with a SiO2 content of 59.7 wt% has been estimated. However, there exists a significant lateral variation in the crustal structures among the tectonic units of eastern China. The structure and composition features of some regions in eastern China in  相似文献   

16.
Spectral analysis method was applied to aeromagnetic data obtained for Ikogosi warm spring (IWS) area of southwestern Nigeria. This was done with the objective of determining the bottom of the magnetized crust called Curie point depth (CDP) and understand the nature and extent of the local geothermal system at depth beneath IWS. The depth to the centroid, Z o, of the deepest distribution of the magnetic dipoles was obtained by computing least-squares fit to the lowest-frequency segment of the azimuthally averaged log power spectrum. The average depth to the top of the deepest crustal block was computed as the depth to the top, Z t, of the second lowest-frequency segment of the spectrum. The depth to the bottom of the deepest magnetic dipoles, the inferred Curie point depth, was then calculated from Z b?=?2Z o???Z t. The Curie depth estimates for IWS range between 4.68 and 11.38 km (below sea level). We also estimate the heat flow and Curie temperature using a one-dimensional conductive heat transport model. The average heat flow, 42 mW m?2, and geothermal gradient, 32°C/km, obtained suggest a low enthalpy thermal regime. The Curie temperature for the region varies between 153°C and 350°C. Also, an inverse linear relationship between heat flow and Curie depths was determined. Good agreement between the Curie point depths derived from heat flow data and magnetic data suggests that the Curie point depth analysis is useful to estimate the regional thermal structure and the tectonic settings.  相似文献   

17.
To estimate the deep structure of the southern part of the Nojima Fault, southwest Japan without the influence of near-surface structures, we analyzed the Love-wave-type fault-zone trapped waves (LTWs) recorded by a borehole seismometer at 1800 m depth. We examined the polarization, dispersion, and dominant frequency of the wavetrain following the direct S-wave in each seismogram to identify the LTW. We selected eight candidates for typical LTWs from 462 records. Because the duration of the LTW increases with hypocentral distance, we infer that the low velocity fault-zone of the Nojima Fault continues towards the seismogenic depth. In addition, since the duration of the LTW increases nonlinearly with hypocentral distance, we infer that the S-wave velocity of the fault-zone increases with depth. The location of events showing the LTW indicates that the fault-zone dips to the southeast at 75° and continues to a depth of approximately 10 km. We assumed a uniform low-velocity waveguide to estimate the average structure of the fault-zone. We estimated the average width, S-wave velocity, and Qs of the fault-zone by comparing an analytical solution of the LTW with measured data. The average width, S-wave velocity, and Qs of the fault-zone are 150 to 290 m, 2.5 to 3.2 km/s, and 40 to 90, respectively. Hence the fault-zone structure with a larger width and smaller velocity reduction than the fault-zone model estimated by previous surface observation is more suitable to represent the average fault-zone structure of the Nojima fault. The present study also indicated that the shallow layers and/or a shallow fault-zone structure drastically changes the characteristics of the LTW recorded at the surface, and therefore cause a discrepancy in the fault-zone model between the borehole observation and surface observation.  相似文献   

18.
The crustal structure beneath three seismic stations over Malaysia has been investigated with the application of the group velocity dispersion analysis of the northern Sumatra earthquake data which occurred on 06 April 2010. Eighteen crustal layer models are constructed to assess the structure. Group velocity dispersions have been computed for the recorded earthquake data using a graphical method and modified Haskell matrix method for the models. Both dispersions have been presented for the interpretation of crustal layers. Findings have shown four major crustal layers having thicknesses of 2.5–4.0, 2.0–5.5, 5.0–8.0, and 8.5–9.0 km, while in Terengganu, it has shown three layers. Density, shear, and compressional wave velocities used in models have suggested that the crustal structure of the northern part of Peninsular Malaysia is crystalline. Major crustal minerals are of quartz, plagioclase, and mica. Most layers seem to have upward directions toward Perak from Kedah and Terengganu.  相似文献   

19.
There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V P /V S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.  相似文献   

20.
The crustal and upper mantle compressional-wave velocity structure across the southwestern Arabian Shield has been investigated by a 1000-km-long seismic refraction profile. The profile begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, trends southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan, and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, and six shot points were used, including one in the Red Sea.Two-dimensional ray-tracing techniques, used to analyze amplitude-normalized record sections indicate that the Arabian Shield is composed, to first order, of two layers, each about 20 km thick, with average velocities of about 6.3 km/s and 7.0 km/s, respectively. West of the Shield-Red Sea margin, the crust thins to a total thickness of less than 20 km, beyond which the Red Sea shelf and coastal plain are interpreted to be underlain by oceanic crust.A major crustal inhomogeneity at the northeast end of the profile probably represents the suture zone between two crustal blocks of different composition. Elsewhere along the profile, several high-velocity anomalies in the upper crust correlate with mapped gneiss domes, the most prominent of which is the Khamis Mushayt gneiss. Based on their velocities, these domes may constitute areas where lower crustal rocks have been raised some 20 km. Two intracrustal reflectors in the center of the Shield at 13 km depth probably represent the tops of mafic intrusives.The Mohorovičić discontinuity beneath the Shield varies from a depth of 43 km and mantle velocity of 8.2 km/s in the northeast to a depth of 38 km and mantle velocity of 8.0 km/s depth in the southwest near the Shield-Red Sea transition. Two velocity discontinuities occur in the upper mantle, at 59 and 70 km depth.The crustal and upper mantle velocity structure of the Arabian Shield is interpreted as revealing a complex crust derived from the suturing of island arcs in the Precarnbrian. The Shield is currently flanked by the active spreading boundary in the Red Sea.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号