首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The system Fe-Si-O: Oxygen buffer calibrations to 1,500K   总被引：1，自引：0，他引：1  
The five solid-phase oxygen buffers of the system Fe-Si-O, iron-wuestite (IW), wuestite-magnetite (WM), magnetite-hematite (MH), quartz-iron-fayalite (QIF) and fayalite-magnetite-quartz (FMQ) have been recalibrated at 1 atm pressure and temperatures from 800°–1,300° C, using a thermogravimetric gas mixing furnace. The oxygen fugacity, \(f_{{\text{O}}_{\text{2}} }\) was measured with a CaO-doped ZrO2 electrode. Measurements were made also for wuestite solid solutions in order to determine the redox behavior of wuestites with O/Fe ratios varying from 1.05 to 1.17. For FMQ, additional determinations were carried out at 1 kb over a temperature range of 600° to 800° C, using a modified Shaw membrane. Results agree reasonably well with published data and extrapolations. The reaction parameters K, ΔG r o , ΔH r o , and ΔS r o were calculated from the following log \(f_{{\text{O}}_{\text{2}} }\) /T relations (T in K): $$\begin{gathered} {\text{IW }}\log f_{{\text{O}}_{\text{2}} } = - 26,834.7/T + 6.471\left( { \pm 0.058} \right) \hfill \\ {\text{ }}\left( {{\text{800}} - 1,260{\text{ C}}} \right), \hfill \\ {\text{WM }}\log f_{{\text{O}}_{\text{2}} } = - 36,951.3/T + 16.092\left( { \pm 0.045} \right) \hfill \\ {\text{ }}\left( {{\text{1,000}} - 1,300{\text{ C}}} \right), \hfill \\ {\text{MH }}\log f_{{\text{O}}_{\text{2}} } = - 23,847.6/T + 13.480\left( { \pm 0.055} \right) \hfill \\ {\text{ }}\left( {{\text{1,040}} - 1,270{\text{ C}}} \right), \hfill \\ {\text{QIF }}\log f_{{\text{O}}_{\text{2}} } = - 27,517.5/T + 6.396\left( { \pm 0.049} \right) \hfill \\ {\text{ }}\left( {{\text{960}} - 1,140{\text{ C}}} \right), \hfill \\ {\text{FMQ }}\log f_{{\text{O}}_{\text{2}} } = - 24,441.9/T + 8.290\left( { \pm 0.167} \right) \hfill \\ {\text{ }}\left( {{\text{600}} - 1,140{\text{ C}}} \right). \hfill \\ \end{gathered}$$ These experimentally determined reaction parameters were combined with published 298 K data to determine the parameters Gf, Hf, and Sf for the phases wuestite, magnetite, hematite, and fayalite from 298 K to the temperatures of the experiments. The T? \(f_{{\text{O}}_{\text{2}} }\) data for wuestite solid solutions were used to obtain activities, excess free energies and Margules mixing parameters. The new data provide a more reliable, consistent and complete reference set for the interpretation of redox reactions at elevated temperatures in experiments and field settings encompassing the crust, mantle and core as well as extraterrestrial environments.  相似文献   

2.
In the system Na2O-CaO-Al2O3-SiO2 (NCAS), the equilibrium compositions of pyroxene coexisting with grossular and corundum were experimentally determined at 40 different P-T conditions (1,100–1,400° C and 20.5–38 kbar). Mixing properties of the Ca-Tschermak — Jadeite pyroxene inferred from the data are (J, K): $$\begin{gathered} G_{Px}^{xs} = X_{{\text{CaTs}}} X_{{\text{Jd}}} [14,810 - 7.15T - 5,070(X_{{\text{CaTs}}} - X_{{\text{Jd}}} ) \hfill \\ {\text{ }} - 3,350(X_{{\text{CaTs}}} - X_{{\text{Jd}}} )^2 ] \hfill \\ \end{gathered} $$ The excess entropy is consistent with a complete disorder of cations in the M2 and the T site. Compositions of coexisting pyroxene and plagioclase were obtained in 11 experiments at 1,190–1,300° C/25 kbar. The data were used to infer an entropy difference between low and high anorthite at 1,200° C, corresponding to the enthalpy difference of 9.6 kJ/mol associated with the C \(\bar 1\) =I \(\bar 1\) transition in anorthite as given by Carpenter and McConnell (1984). The resulting entropy difference of 5.0 J/ mol · K places the transition at 1,647° C. Plagioclase is modeled as ideal solutions, C \(\bar 1\) and I \(\bar 1\) , with a non-first order transition between them approximated by an empirical expression (J, bar, K): $$\Delta G_T = \Delta G_{1,473} \left[ {1 - 3X_{Ab} \tfrac{{T^4 - 1,473^4 }}{{\left( {1,920 - 0.004P} \right)^4 - 1,473^4 }}} \right],$$ where $$\Delta G_{1,473} = 9,600 - 5.0T - 0.02P$$ The derived mixing properties of the pyroxene and plagioclase solutions, combined with the thermodynamic properties of other phases, were used to calculate phase relations in the NCAS system. Equilibria involving pyroxene+plagioclase +grossular+corundum and pyroxene+plagioclase +grossular+kyani te are suitable for thermobarometry. Albite is the most stable plagioclase.  相似文献   

3.
The Gibbs free energy and volume changes attendant upon hydration of cordierites in the system magnesian cordierite-water have been extracted from the published high pressure experimental data at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =P total, assuming an ideal one site model for H2O in cordierite. Incorporating the dependence of ΔG and ΔV on temperature, which was found to be linear within the experimental conditions of 500°–1,000°C and 1–10,000 bars, the relation between the water content of cordierite and P, T and \(f_{{\text{H}}_{\text{2}} {\text{O}}} \) has been formulated as $$\begin{gathered} X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} = \hfill \\ \frac{{f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }}{{\left[ {{\text{exp}}\frac{1}{{RT}}\left\{ {64,775 - 32.26T + G_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{1, }}T} - P\left( {9 \times 10^{ - 4} T - 0.5142} \right)} \right\}} \right] + f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }} \hfill \\ \end{gathered} $$ The equation can be used to compute H2O in cordierites at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) <1. Our results at different P, T and partial pressure of water, assuming ideal mixing of H2O and CO2 in the vapour phase, are in very good agreement with the experimental data of Johannes and Schreyer (1977, 1981). Applying the formulation to determine \(X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} \) in the garnet-cordierite-sillimanite-plagioclase-quartz granulites of Finnish Lapland as a test case, good agreement with the gravimetrically determined water contents of cordierite was obtained. Pressure estimates, from a thermodynamic modelling of the Fe-cordierite — almandine — sillimanite — quartz equilibrium at \(P_{{\text{H}}_{\text{2}} {\text{O}}} = 0\) and \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =Ptotal, for assemblages from South India, Scottish Caledonides, Daly Bay and Hara Lake areas are compatible with those derived from the garnetplagioclase-sillimanite-quartz geobarometer.  相似文献   

4.
Approximately 125 hydrothermal annealing experiments have been carried out in an attempt to bracket the stability fields of different ordered structures within the plagioclase feldspar solid solution. Natural crystals were used for the experiments and were subjected to temperatures of ～650°C to ～1,000°C for times of up to 370 days at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =600 bars, or \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =1,200 bars. The structural states of both parent and product materials were characterised by electron diffraction, with special attention being paid to the nature of type e and type b reflections (at h+k=(2n+1), l=(2n+1) positions). Structural changes of the type C \(\bar 1\) → I \(\bar 1\) , C \(\bar 1\) → “e” structure, I \(\bar 1\) → “e” and “e” structure → I \(\bar 1\) have been followed. There are marked differences between the ordering behaviour of crystals with compositions on either side of the C \(\bar 1\) ? I \(\bar 1\) transition line. In the composition range ～ An50 to ～ An70 the e structure appears to have a true field of stability relative to I \(\bar 1\) ordering, and a transformation of the type I \(\bar 1\) ? e has been reversed. It is suggested that the e structure is the more stable ordered state at temperatures of ～ 800°C and below. For compositions more albite-rich than ～ An50 the upper temperature limit for long range e ordering is lower than ～ 750°C, and there is no evidence for any I \(\bar 1\) ordering. The evidence for a true stability field for “e” plagioclase, which is also consistent with calorimetric data, necessitates reanalysis both of the ordering behaviour of plagioclase crystals in nature and of the equilibrium phase diagram for the albite-anorthite system. Igneous crystals with compositions of ～ An65, for example, probably follow a sequence of structural states C \(\bar 1\) → I \(\bar 1\) → e during cooling. The peristerite, Bøggild and Huttenlocher miscibility gaps are clearly associated with breaks in the albite, e and I \(\bar 1\) ordering behaviour but their exact topologies will depend on the thermodynamic character of the order/disorder transformations.  相似文献   

5.
A garnet-clinopyroxene geothermometer based on the available experimental data on compositions of coexisting phases in the system MgO-FeO-MnO-Al2O3-Na2O-SiO2 is as follows: $$T({\text{}}K) = \frac{{8288 + 0.0276 P {\text{(bar)}} + Q1 - Q2}}{{1.987 \ln K_{\text{D}} + 2.4083}}$$ where P is pressure, and Q1, Q2, and K D are given by the following equations $$Q1 = 2,710{\text{(}}X_{{\text{Fe}}} - X_{{\text{Mg}}} {\text{)}} + 3,150{\text{ }}X_{{\text{Ca}}} + 2,600{\text{ }}X_{{\text{Mn}}} $$ (mole fractions in garnet) $$\begin{gathered}Q2 = - 6,594[X_{{\text{Fe}}} {\text{(}}X_{{\text{Fe}}} - 2X_{{\text{Mg}}} {\text{)]}} \hfill \\{\text{ }} - 12762{\text{ [}}X_{{\text{Fe}}} - X_{{\text{Mg}}} (1 - X_{{\text{Fe}}} {\text{)]}} \hfill \\{\text{ }} - 11,281[X_{{\text{Ca}}} (1 - X_{{\text{Al}}} ) - 2X_{{\text{Mg}}} 2X_{{\text{Ca}}} ] \hfill \\{\text{ + 6137[}}X_{{\text{Ca}}} (2X_{{\text{Mg}}} + X_{{\text{Al}}} )] \hfill \\{\text{ + 35,791[}}X_{{\text{Al}}} (1 - 2X_{{\text{Mg}}} )] \hfill \\{\text{ + 25,409[(}}X_{{\text{Ca}}} )^2 ] - 55,137[X_{{\text{Ca}}} (X_{{\text{Mg}}} - X_{{\text{Fe}}} )] \hfill \\{\text{ }} - 11,338[X_{{\text{Al}}} (X_{{\text{Fe}}} - X_{{\text{Mg}}} )] \hfill \\\end{gathered} $$ [mole fractions in clinopyroxene Mg = MgSiO3, Fe = FeSiO3, Ca = CaSiO3, Al = (Al2O3-Na2O)] K D = (Fe/Mg) in garnet/(Fe/Mg) in clinopyroxene. Mn and Cr in clinopyroxene, when present in small concentrations are added to Fe and Al respectively. Fe is total Fe2++Fe3+.  相似文献   

6.
Ephesite, Na(LiAl2) [Al2Si2O10] (OH)2, has been synthesized for the first time by hydrothermal treatment of a gel of requisite composition at 300≦T(° C)≦700 and \(P_{H_2 O}\) upto 35 kbar. At \(P_{H_2 O}\) between 7 and 35 kbar and above 500° C, only the 2M1 polytype is obtained. At lower temperatures and pressures, the 1M polytype crystallizes first, which then inverts to the 2M1 polytype with increasing run duration. The X-ray diffraction patterns of the 1M and 2M1 poly types can be indexed unambiguously on the basis of the space groups C2 and Cc, respectively. At its upper thermal stability limit, 2M1 ephesite decomposes according to the reaction (1) $$\begin{gathered} {\text{Na(LiAl}}_{\text{2}} {\text{) [Al}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{{\text{10}}} {\text{] (OH)}}_{\text{2}} \hfill \\ {\text{ephesite}} \hfill \\ {\text{ = Na[AlSiO}}_{\text{4}} {\text{] + LiAl[SiO}}_{\text{4}} {\text{] + }}\alpha {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}} {\text{ + H}}_{\text{2}} {\text{O}} \hfill \\ {\text{nepheline }}\alpha {\text{ - eucryptite corundum}} \hfill \\ \end{gathered}$$ Five reversal brackets for (1) have been established experimentally in the temperature range 590–750° C, at \(P_{H_2 O}\) between 400 and 2500 bars. The equilibrium constant, K, for this reaction may be expressed as (2) $$log K{\text{ = }}log f_{{\text{H}}_{\text{2}} O}^* = 7.5217 - 4388/T + 0.0234 (P - 1)T$$ where \(f_{H_2 O}^* = f_{H_2 O} (P,T)/f_{H_2 O}^0\) (1,T), with T given in degrees K, and P in bars. Combining these experimental data with known thermodynamic properties of the decomposition products in (1), the following standard state (1 bar, 298.15 K) thermodynamic data for ephesite were calculated: H f,298.15 0 =-6237372 J/mol, S 298.15 0 =300.455 J/K·mol, G 298.15 0 =-5851994 J/mol, and V 298.15 0 =13.1468 J/bar·mol.  相似文献   

7.
The non-ferroic triclinic to triclinic \(I\bar 1 - P\bar 1\) phase transition in anorthite is described in terms of the spontaneous onset of an order parameter η. A triclinic to triclinic phase transition can be driven by order parameters (representations) arising from the Γ, Z, X, U, V, R, Y, and T points of symmetry of the Brillouin zone. Each point leads to a set of two inequivalent representations and thus there is a total of sixteen inequivalent order parameters. However, only the R 1 + representation is consistent with the change from the body-centered to primitive cell (increase of primitive cell size of two) and also with the origin of the two space groups (inversion center) being at the same position. The R 1 + order parameter of the high symmetry triclinic phase \(P\bar 1_0\) (or equivalently \(I\bar 1\) ) causes a reciprocal lattice change and, in terms of the lower symmetry reciprocal lattice, the order parameter corresponds to the b* point. This is consistent with experimentally observed x-ray diffuse scattering. Using induced representation theory, microscopic distortions compatible with the R 1 + order parameter are obtained. Assuming a distortion in an arbitrary direction at the general 2(i) Wyckoff position (x0,y0,z0) of \(P\bar 1_0\) (the higher symmetry phase) induced representation theory demands an opposite displacement at the position (x0, y0, z0), an opposite displacement at (x0+1,y0+1,z0+1), and the same displacement at ( \(\bar x\) 0+1, \(\bar y\) 0+1, \(\bar z\) 0+1) of \(P\bar 1_0\) . This is also consistent with experiment. The presence of the weak c-type reflections above the transition is attributed to the fluctuating lower symmetry antiphase domains related by the translation (1/2, 1/2, 1/2).  相似文献   

8.
A statistical mechanical analysis of the limiting laws for coupled solid solutions shows that the random model, in which the configurational entropy is calculated as if atoms mix randomly on each crystallographic site, is correct as a first approximation. In coupled solid solutions, since atoms of different valence substitute on the same sites, significant short-range order which reduces the entropy can be expected. A first-order correction is rigorously obtained for the entropy in dilute binary short-range ordered coupled solid solutions: $$\bar S^{{\text{XS}}} {\text{/R = }}Q\left( {{\text{e}}^{--H_{\text{A}} /{\text{R}}T} \left( {\frac{{H_{\text{A}} }}{{{\text{R}}T}} + 1} \right) - 1} \right)N_2^a N_4^b ,$$ where Q is the number of positions an associated cation pair can assume per formula unit, H A is the association energy per formula unit, and N 2 a and N 4 b are the site occupancy fractions for atoms 2 and 4 that are dilute on sites a and b. S XS is the configurational entropy minus the random model entropy. Aluminous pyroxenes on the joints diopside-jadeite and diopside-CaTs are examined as examples. A generalization for dilute multiple component solutions, including possible long-range ordering variations is given by: $$\frac{{\bar S^{{\text{XS}}} }}{{\text{R}}}{\text{ = }}\sum\limits_i {\sum\limits_j {\sum\limits_k {Q_i } } \left( {{\text{e}}^{--H_{\text{A}}^{j{\text{ }}k{\text{, }}i} /{\text{R}}T} \left( {\frac{{H_{\text{A}}^{j{\text{ }}k{\text{, }}i} }}{{{\text{R}}T}} + 1} \right) - 1} \right)N_j^l N_k^m ,} $$ where i labels each crystallographically distinct pair, j and k label atomic species, l and m label crystallographic sites, and the N's are site occupancy fractions for the solute atoms. A total association model is examined as well as the partial association and random models. Real solution behavior must lie between the total association model and the random model. Molecular models in which the ideal activity is proportional to a mole fraction, which in itself is not always unambiguously defined, do not lie in this range and furthermore have no physical justification.  相似文献   

9.
The available experimental data on garnet-bearing-assemblages for synthetic chemical systems (MAS, FMAS, CMAS) have been used to calibrate consistent models for the Al-solubility in orthopyroxene coexisting with garnet, on the basis of equilibrium reaction Py(opx) ? Py(gt). The alternative reaction En(opx)+MgTs(opx) ? Py(gt) is discarded as it yields larger a-posteriori uncertainties. To provide a reliable equation, directly applicable to natural garnet lherzolites, each successive synthetic-system calibration is tested against Mori and Green's (1978) natural-system reequilibration data. For the MAS system, an ideal solution model with constant ΔH°, ΔV° and ΔS° based on 12-oxygen structural formulae for aluminous pyroxenes yields the best fit (GPa, K), $${\text{25,134 + 9,941 }}P - 23.177{\text{ }}T{\text{ + }}RT{\text{ ln (}}X_{{\text{Al}}}^{TB'} {\text{) = 0}}$$ . The MAS synthetic-system calibration can be directly applied to the FMAS system by adding an empirical correction term (20,835 [X Fe gt ]2) independent of either pressure and temperature. However, this correction term is not important because of the limited Fe content of mantle peridotites. When calcium is added to the MAS system, the equilibrium constant is calculated as: $$K_{{\text{CMAS}}} = {{[(1 - X_{{\text{Ca}}}^{M2} )^2 (X_{{\text{Al}}}^{TB'} )]} \mathord{\left/ {\vphantom {{[(1 - X_{{\text{Ca}}}^{M2} )^2 (X_{{\text{Al}}}^{TB'} )]} {[(1 - X_{{\text{Ca}}}^X )^3 (X_{{\text{Al}}}^Y )^2 ]}}} \right. \kern-\nulldelimiterspace} {[(1 - X_{{\text{Ca}}}^X )^3 (X_{{\text{Al}}}^Y )^2 ]}}$$ where M2 and TB′ are pyroxene sites and X and Y are garnet sites. Up to 5 GPa, X Ca X ～ and the CMAS experimental data agree well with the MAS model, but for Yamada and Takahashi's (1983) higher pressure experiments (up to 10 GPa), this no longer holds. Indeed, the garnet solid solution does not behave ideally and an asymmetric regular solution model is needed for application to the deepest natural samples available (>7GPa). Calibration based on new high pressure data yields, $$\begin{gathered} \Delta G_{{\text{CMAS}}}^{XS} = (X_{{\text{Ca}}}^X )(1 - X_{{\text{Ca}}}^X )(0.147 - X_{{\text{Ca}}}^X ) \hfill \\ {\text{ }} \cdot {\text{(6,440,535 - 1,490,654 }}P{\text{)}} \hfill \\ \end{gathered}$$ . According to tests of the inferred solution model, the CFMAS system is a good analogue of natural systems in the pressure, temperature and composition ranges covered by the natural-system reequilibration data (up to 1,500° C and 4 GPa). Simultaneous application of this thermobarometer and of the two-pyroxene mutual solubility thermometer (Bertrand and Mercier 1985) to the phases of the garnet-peridotite xenoliths from Thaba Putsoa, Lesotho, yields a refined paleogeotherm for southern Africa strongly contrasting with previous results. The “granular” nodules yield a thermal gradient of about 8 K/km characteristic of a lithospheric-type environment, whereas the “sheared” ones show a lower gradient of about 1 K/km. This is a typical geotherm expected for a steady thermal state with an inflexion point at the depth of about 160 km corresponding to the lithosphere/asthenosphere boundary.  相似文献   

10.
We present 29Si MAS NMR data for a well-ordered natural anorthite, obtained in situ at temperatures of from 25 to 500° C, which follow the changes in the aluminosilicate framework through the P $\bar 1$ -I $\bar 1$ structural phase transition. Pairs of peaks due to sites offset by approximately 1/2 [111] converge through the P $\bar 1$ phase and only four peaks are present above about 241° C. The variation of the peak positions with temperature and correlations based on structural data for the P $\bar 1$ and I $\bar 1$ phases allow assignment of all the MAS-NMR peaks to crystallographic sites. A Landau-type analysis gives an expression that relates the separation of pairs of con verging peaks to the local order parameter for the P $\bar 1$ -I $\bar 1$ transition, from which we determine its temperature dependence. Data for the best-constrained set of peak positions give for the order parameter critical exponent β = 0.27±0.04, consistent with previous results indicating that the P $\bar 1$ -I $\bar 1$ transition in pure anorthite is tricritical. No significant change in the 29Si spin-lattice relaxation rate occurs across the P $\bar 1$ -I $\bar 1$ transition.  相似文献   

11.
Given the direction cosines a i ′ = (a 1 i , a 2 i , a 3 i )corresponding to a set of pspherically projected fabric poles, an initial estimate x′ = (x1, x2, x3, x4)for the angular radius x4,and direction cosines of the center of the least-squares small circle which minimizes the sum of the squares of the angular residuals $$r = \sum\limits_p {\left[ {x_4 - \cos ^{ - 1} \left( {a_1^i x_1 + a_2^i x_2 + a_3^i x_3 } \right)} \right]} ^2 $$ can be iteratively improved by taking xj+1 = xj + Δxwhere xj is the value of xat the jth iteration and $$\Delta x = - H_j^{ - 1} \left[ {q_j + x_j \left( {x'_j H_j^{ - 1} x_j } \right)\left( {q_j - x'_j H_j^{ - 1} q_j } \right)} \right],$$ where As an initial approximation for xwe have found it convenient to ignore the fact that the data are constrained to lie on the surface of the reference sphere and to use the parameters of a least-squares plane through the given poles. Generalization of this approach to fitting variously constrained great and small circles is easily made. The relative merits of differently constrained fits to the same data can be tested approximately if it is assumed that the errors in the location of the poles are isotropic and normally distributed. It is thus possible to statistically assess the relative significance of conflicting structural models which predict different geometrical patterns of fabric elements.  相似文献   

12.
An experimental study initiated to calibrate the distribution coefficient \(K_D = \frac{{({\text{FeO}}/{\text{MgO}})_{{\text{ga}}} }}{{{\text{(FeO}}/{\text{MgO)}}_{{\text{cpx}}} }}\) in eclogites as a geothermometer has been done on (a) a mineral mis, (b) a glass of the typical tholeiite composition and (c) a series of glasses of tholeiite compositions with \(6.2 < \frac{{100{\text{Mg}}}}{{{\text{Mg}} + {\text{Fe}}^{ + + } }} < 93.\) The mineral mix was found to be unsuitable as reactant due to incomplete equilibration but the minimum K D of the mineral mix and the K D from glass of tholeiite composition are identical within experimental uncertainty. These data constitute a reversal of the garnet/clinopyroxene partition relationship and provide justification of the use of glass as a reactant for the project. To eliminate any uncertainty in interpretation of mineral analyses due to possible variation in Fe+++/Fe++ between runs, experiments were carried out in iron capsules on the nine tholeiite glasses, thus maintaining iron as Fe++. Microprobe analytical techniques yielded mineral analyses of comparable accuracy to analyses of natural phases for experiments within the temperature range from 600° C to 1500° C and a pressure range from 20 kb to 40 kb. It has been shown that for \(6.2 < \frac{{100{\text{Mg}}}}{{{\text{Mg}} + {\text{Fe}}^{ + + } }} < 85\) , the bulk chemical composition does not perceptibly affect the K D value. At 30 kb the K D value ranges from 18.0 at 600° C to 1.45 at 1400° C, defining the linear relationship in a ln K D vs 1/T(°K) plot. The pressure dependence of the K D -value has been shown to be greater than previously predicted. There is a straight line relationship in ln K D vs Pressure (Kb) between 20 and 40 kb at constant temperature (1100°C). This enables us to determine K D =fn (T, P) and \(T(^\circ {\text{K}}) = \frac{{3686 + 28.35 \times P({\text{Kb}})}}{{\ln K_D + 2.33}}\) . This expression uniquely determines the temperature of equilibration of natural eclogites of basaltic bulk composition when the K D ga,cpx is known and a pressure estimate can be given.  相似文献   

13.
P, T, \(X_{{\text{CO}}_{\text{2}} }\) relations of gehlenite, anorthite, grossularite, wollastonite, corundum and calcite have been determined experimentally at P f =1 and 4 kb. Using synthetic starting minerals the following reactions have been demonstrated reversibly
  1. 2 anorthite+3 calcite=gehlenite+grossularite+3 CO2.
  2. anorthite+corundum+3 calcite=2 gehlenite+3 CO2.
  3. 3anorthite+3 calcite=2 grossularite+corundum+3CO2.
  4. grossularite+2 corundum+3 calcite=3 gehlenite+3 CO2.
  5. anorthite+2 calcite=gehlenite+wollastonite+2CO2.
  6. anorthite+wollastonite+calcite=grossularite+CO2.
  7. grossularite+calcite=gehlenite+2 wollastonite+CO2.
In the T, \(X_{{\text{CO}}_{\text{2}} }\) diagram at P f =1 kb two isobaric invariant points have been located at 770±10°C, \(X_{{\text{CO}}_{\text{2}} }\) =0.27 and at 840±10°C, \(X_{{\text{CO}}_{\text{2}} }\) =0.55. Formation of gehlenite from low temperature assemblages according to (4) and (2) takes place at 1 kb and 715–855° C, \(X_{{\text{CO}}_{\text{2}} }\) =0.1–1.0. In agreement with experimental results the formation of gehlenite in natural metamorphic rocks is restricted to shallow, high temperature contact aureoles.  相似文献   

14.
Equilibrium alumina contents of orthopyroxene coexisting with spinel and forsterite in the system MgO-Al2O3-SiO2 have been reversed at 15 different P-T conditions, in the range 1,030–1,600° C and 10–28 kbar. The present data and three reversals of Danckwerth and Newton (1978) have been modeled assuming an ideal pyroxene solid solution with components Mg2Si2O6 (En) and MgAl2SiO6 (MgTs), to yield the following equilibrium condition (J, bar, K): $$\begin{gathered} RT{\text{ln(}}X_{{\text{MgTs}}} {\text{/}}X_{{\text{En}}} {\text{) + 29,190}} - {\text{13}}{\text{.42 }}T + 0.18{\text{ }}T + 0.18{\text{ }}T^{1.5} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [0.013 + 3.34 \times 10^{ - 5} (T - 298) - 6.6 \times 10^{ - 7} P]P. \hfill \\ \end{gathered} $$ The data of Perkins et al. (1981) for the equilibrium of orthopyroxene with pyrope have been similarly fitted with the result: $$\begin{gathered} - RT{\text{ln(}}X_{{\text{MgTs}}} \cdot X_{{\text{En}}} {\text{) + 5,510}} - 88.91{\text{ }}T + 19{\text{ }}T^{1.2} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [ - 0.832 - 8.78{\text{ }} \times {\text{ 10}}^{ - {\text{5}}} (T - 298) + 16.6{\text{ }} \times {\text{ 10}}^{ - 7} P]{\text{ }}P. \hfill \\ \end{gathered} $$ The new parameters are in excellent agreement with measured thermochemical data and give the following properties of the Mg-Tschermak endmember: $$H_{f,970}^0 = - 4.77{\text{ kJ/mol, }}S_{298}^0 = 129.44{\text{ J/mol}} \cdot {\text{K,}}$$ and $$V_{298,1}^0 = 58.88{\text{ cm}}^{\text{3}} .$$ The assemblage orthopyroxene+spinel+olivine can be used as a geothermometer for spinel lherzolites, subject to a choice of thermodynamic mixing models for multicomponent orthopyroxene and spinel. An ideal two-site mixing model for pyroxene and Sack's (1982) expressions for spinel activities provide, with the present experimental calibration, a geothermometer which yields temperatures of 800° C to 1,350° C for various alpine peridotites and 850° C to 1,130° C for various volcanic inclusions of upper mantle origin.  相似文献   

15.
The partitioning of Fe and Mg between garnet and aluminous orthopyroxene has been experimentally investigated in the pressure-temperature range 5–30 kbar and 800–1,200° C in the FeO-MgO-Al2O3-SiO2 (FMAS) and CaO-FeO-MgO-Al2O3-SiO2 (CFMAS) systems. Within the errors of the experimental data, orthopyroxene can be regarded as macroscopically ideal. The effects of Calcium on Fe-Mg partitioning between garnet and orthopyroxene can be attributed to non-ideal Ca-Mg interactions in the garnet, described by the interaction term:W CaMg ga -W CaFe ga =1,400±500 cal/mol site. Reduction of the experimental data, combined with molar volume data for the end-member phases, permits the calibration of a geothermometer which is applicable to garnet peridotites and granulites: $$T(^\circ C) = \left\{ {\frac{{3,740 + 1,400X_{gr}^{ga} + 22.86P(kb)}}{{R\ln K_D + 1.96}}} \right\} - 273$$ with $$K_D = {{\left\{ {\frac{{Fe}}{{Mg}}} \right\}^{ga} } \mathord{\left/ {\vphantom {{\left\{ {\frac{{Fe}}{{Mg}}} \right\}^{ga} } {\left\{ {\frac{{Fe}}{{Mg}}} \right\}}}} \right. \kern-\nulldelimiterspace} {\left\{ {\frac{{Fe}}{{Mg}}} \right\}}}$$ and $$X_{gr}^{ga} = (Ca/Ca + Mg + Fe)^{ga} .$$ The accuracy and precision of this geothermometer are limited by largerelative errors in the experimental and natural-rock data and by the modest absolute variation inK D with temperature. Nevertheless, the geothermometer is shown to yield reasonable temperature estimates for a variety of natural samples.  相似文献   

16.
The lattice parameters of anorthites An98Ab2 and An100 have been measured from 22 to 1100 K. The spontaneous strain arising from the \(I\overline 1 - P\overline 1\) displacive transition in An98 follows second order Landau behaviour. The spontaneous strain (? s) couples quadratically to the order parameter (Q 0) with ? s∝Q 02∝(T c * ?T) and T c * =530 K in An98. This is in contrast to the tricritical behaviour observed in pure anorthite. These observations are consistent with a Landau model for the free energy of Ca-rich plagioclases in which Al/Si order and Na content renormalize the fourth order coefficient.  相似文献   

17.
Raman sprectra of a gypsum crystal were made at pressures between 0.001 and 7 kbar using He gas as the pressure medium. \(\frac{{{\text{d}}v}}{{dP}}\) values for bands in the range 3,600–100 cm?1 were obtained. Comparison of results with \(\frac{{{\text{d}}v}}{{{\text{d}}T}}\) from the literature for temperatures of 77 and 300° K. shows that the internal modes of the SO4 units are more sensitive to pressure than to temperature. The effect is small. Coupled H2O-SO4 translational modes are greatly affected by both pressure and temperature while coupled Ca-SO4 mode are less so. It was found that stretching vibrations of water molecules were affected differently under pressure. The band at 3,500 cm?1 is more greatly displaced by pressure \(\left( {\frac{{{\text{d}}v}}{{{\text{d}}P}} = {\text{2}}{\text{.11cm}}^{{\text{ - 1}}} /{\text{kbar}}} \right)\) than the band at 3,400 cm?1 \(\left( {\frac{{{\text{d}}v}}{{{\text{d}}P}} \simeq {\text{2}}{\text{.11cm}}^{{\text{ - 1}}} /{\text{kbar}}} \right)\) . Assuming two different hydrogen bond intensities for the water molecules, one can attribute this difference in behavior of stretching modes to and increase in hydrogen bonding of one of the hydrogens which is exterior to the double H2O planes in the gypsum structure. The great variety of pressure derivatives for the different types of vibrational modes observed indicates that each molecular unit readjusts internally to pressure induced volume changes and the some of the chemical bonds between the units are significantly affected.  相似文献   

18.
An updated model for pyroxene-melt equilibria at 1 atm has been developed and calibrated using new and existing experimental data in order to refine calculations of liquid lines of descent, which simulate the effect of igneous differentiation processes. We combine the Davidson and Lindsley (1985) model for activities of components in clinopyroxene and orthopyroxene solid solutions, a i p , where i represents a quadrilateral endmember, with the Nielsen and Drake (1979) expressions for component activities in the melt, a i L (two-lattice melt model). The chemical potential differences for pyroxene-melt equilibria are expressed in the form: $$\Delta \mu _{\iota } = 0 = In \left( {{{a_i^p } \mathord{\left/{\vphantom {{a_i^p } {a_i^L }}} \right.\kern-\nulldelimiterspace} {a_i^L }}} \right) + A_i + {{B_i } \mathord{\left/{\vphantom {{B_i } T}} \right.\kern-\nulldelimiterspace} T}$$ Pyroxene compositions were projected to quadrilateral compositions with the method of Lindsley and Anderson (1983). The regression constants A i and B i were calculated from experimental data that consists of 282 pyroxene-melt pairs, including 83 orthopyroxene-melt pairs. These experiments were all performed at 1 atm and represent compositions ranging from basalts (alkali to lunar) to dacites (42–66 wt% SiO2). The model is calibrated for 1000相似文献   

19.
Variations in the equilibrium degree of Al/Si order in anorthite have been investigated experimentally over the temperature range 800-1535° C. Spontaneous strain measurements give the temperature dependence of the macroscopic order parameter, Q, defined with respect to the \(C\bar 1 \rightleftharpoons I\bar 1\) phase transition, while high temperature solution calorimetric data allow the relationship between Q and excess enthalpy, H, to be determined. The thermodynamic behaviour can be described by a Landau expansion in one order parameter if the transition is first order in character, with an equilibrium transition temperature, T tr, of ～2595 K and a jump in Q from 0 to ～0.65 at Ttr. The coefficients in this Landau expansion have been allowed to vary with composition, using Q=1 at 0 K for pure anorthite as a reference point for the order parameter. Published data for H and Q at different compositions allow the calibration of the additional parameters such that the free energy due to the \(C\bar 1 \rightleftharpoons I\bar 1\) transition in anorthite-rich plagioclase feldspars may be expressed (in cal. mole-1) as: \(\begin{gathered}G = \tfrac{1}{2} \cdot 9(T - 2283 + 2525X_{Ab} )Q^2 \\ {\text{ + }}\tfrac{1}{4}( - 26642 + 121100X_{Ab} )Q^4 \\ {\text{ + }}\tfrac{1}{6}(47395 - 98663X_{Ab} )Q^6 \\ \end{gathered}\) where X Ab is the mole fraction of albite component. The nature of the transition changes from first order in pure anorthite through tricritical at ～An78 to second order, with increasing albite content. The magnitude of the free energy of \()\) ordering reduces markedly as X Ab increases. At ～700° C incommensurate ordering in crystals with compositions ～An50–An70 needs to have an associated free energy reduction of only a few hundred calories to provide a more stable structure. These results, together with a simple mixing model for the disordered ( \()\) ) solid solution, an assumed tricritical model for the incommensurate ordering and published data for ordering in albite have been used to calculate a set of possible free energy relations for the plagioclase system. The incommensurate structure should appear on the equilibrium phase diagram, but its apparent stability with respect to the assemblage albite plus anorthite at low temperatures depends on the values assigned to the mixing parameters of the $$$$ solid solution.  相似文献   

20.
The heat capacity (C P) of a natural sample of calcite (CaCO3) has been measured from 350 to 775 K by differential scanning calorimetry (DSC). Heat capacities determined for a powdered sample and a single-crystal disc are in close agreement and have a total uncertainty of ±1 percent. The following equation for the heat capacity of calcite from 298 to 775 K was fit by least squares to the experimental data and constrained to join smoothly with the low-temperature heat capacity data of Staveley and Linford (1969) (C P in J mol?1 K?1, T in K): $$\begin{gathered} C_p = - 184.79 + 0.32322T - 3,688,200T^{ - 2} \hfill \\ {\text{ }} - (1.2974{\text{ }} \times {\text{ 10}}^{ - {\text{4}}} )T^2 + 3,883.5T^{ - 1/2} \hfill \\ \end{gathered} $$ Combining this equation with the S 298 0 value from Staveley and Linford (1969), entropies for calcite are calculated and presented to 775 K. A simple method of extrapolating the heat capacity function of calcite above 775 K is presented. This method provides accurate entropies of calcite for high-temperature thermodynamic calculations, as evidenced by calculation of the equilibrium: CaCO3 (s)=CaO(s)+CO2 (s).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号