共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
A new method, the η or ‘eta’ method, for modeling consolidation by vertical and horizontal drains is presented. The approach is applicable in one, two and three dimensional as well as axisymmetric cases. Material and geometry properties are familiar from unit cell vertical drain analysis and are consistent across dimensions. An uncoupled finite element method (FEM) program is used to test the efficacy of the new approach. Because drains are not explicitly modeled in the finite element mesh, mesh complexity and computational time are greatly reduced. Unlike existing plane strain matching methods there is no special transformation of permeability or drain properties. The analyses conducted indicate that the η method provides an efficient and consistent means of modeling drains in any dimension. 相似文献
3.
In 1986, the Malaysian Highway Authority constructed a series of trial embankments on the Muar Plain (soft marine clay) with the aim of evaluating the effectiveness of various ground improvement techniques. This study investigates the effect of two such ground improvement schemes: (a) preloading of foundation with surface geogrids and synthetic vertical drains and (b) sand compaction piles. The paper is focused on the finite element analysis of settlements and lateral displacements of the soft foundation. In scheme (a), the numerical predictions are compared with the field measurements. In scheme (b), only the numerical analysis is presented and discussed in the absence of reliable measurements due to the malfunctioning of the electronic extensometer and inclinometer system during embankment construction. The current analysis employs critical state soil mechanics, and the deformations are predicted on the basis of the fully coupled (Biot) consolidation model. The vertical drain pattern is converted to equivalent drain walls to enable plane strain modelling, and the geogrids are simulated by linear interface slip elements. The effect of sand compaction piles is investigated considering both ideal drains and non-ideal drains, as well as varying the pile stiffness. © 1997 by John Wiley & Sons, Ltd. 相似文献
4.
为了研究高密度聚乙烯（HDPE）和聚对苯二甲酸乙二醇酯（PET）两种土工格栅在返包式加筋路堤中的加筋效果,基于HDPE和PET的拉伸试验结果,采用FLAC3D有限差分程序并结合现场监测数据对比,分析了加筋路堤中两种土工格栅的受力变形规律。结果表明,土工格栅特性对返包式加筋路堤变形具有明显影响,影响程度与其上部土压力大小密切相关;在加筋土路堤的中下部,土压力较大,HDPE格栅前1/3段和后1/3段的应变存在较大差别,PET格栅的应变沿长度分布相对均匀;随着上部土压力的减小,格栅材料特性的影响减弱,两种格栅的应变曲线趋于接近;PET格栅对加筋路堤水平变形的控制作用更为明显;HDPE格栅加筋路堤的垂直和水平土压力值及其分布与PET加筋路堤差别很小。 相似文献
5.
一种竖井地基竖墙化等效计算方法 总被引：1，自引：1，他引：0
考虑井阻作用,推导了等应变条件下竖墙地基水平向固结解析解,并与等应变条件下的竖井地基径向固结解析解进行比较,得到竖墙地基平面应变问题和竖井地基轴对称问题之间的等效方法。该方法转换公式简单,且能保证两种情形下同一深度处平均孔压在任一时刻相等,确保了转换为平面应变有限元分析的准确性。 相似文献
6.
《Geomechanics and Geoengineering》2013,8(3):195-207
This paper presents the finite element (FE) analysis of the consolidation of the foundation of an embankment constructed over soft clay deposit which shows significant time dependent behaviour and was improved with prefabricated vertical drains. To assess the capability of a simple elastic viscoplastic (EVP) model to predict the long term performance of a geotechnical structure constructed on soft soils, a well documented (Leneghans) embankment was analyzed to predict its long term behaviour characteristics. Two fully coupled two dimensional (2D) plane strain FE analyses have been carried out. In one of these, the foundation of the embankment was modelled with a relatively simpler time dependent EVP model and in the other one, for comparison purposes, the foundation soil was modelled with elasto-plastic Modified Cam-clay (MCC) model. Details of the analyses and the results are discussed in comparison with the field performance. Predictions from the creep (EVP) model were found to be better than those from Elasto-plastic (MCC) analysis. However, the creep analysis requires an additional parameter and additional computational time and resources. 相似文献
7.
Analytical solution to axisymmetric consolidation of unsaturated soil stratum under equal strain condition incorporating smear effects 
下载免费PDF全文
下载免费PDF全文 This paper proposes closed‐form analytical solutions to the axisymmetric consolidation of an unsaturated soil stratum using the equal strain hypothesis. Following the 1‐dimensional (1D) consolidation theory for unsaturated soil mechanics, polar governing equations describing the air and water flows are first presented on the basis of Fick's law and Darcy's law, respectively. The current study takes into account the peripheral smear caused by an installation of vertical drain. Separation of variables and Laplace transformation are mainly adopted in the analytical derivation to obtain final solutions. Then, the hydraulic conductivity ratio, the radius of influence zone and smear parameters influencing time‐dependent excess pore pressures, and the average degree of consolidation are graphically interpreted. In this study, a comparison made between the proposed equal strain results and the existing free strain results suggests that both hypotheses would deliver similar predictions. Moreover, it is found that the smear zone resulting from vertical drain installations would hinder the consolidation rate considerably. 相似文献
8.
9.
软黏土地基由于其含水量高、孔隙比大、强度低、渗透性差,因此,在灵敏度很高的软黏土地基上建造高度较高的路堤,其稳定性很难得到保证。一般采用分级加载的方法使软土地基在路堤荷载的作用下发生固结,强度获得增长。为加速固结,常采用塑料排水板处理地基,使之能在较短的时间内完成固结,加速地基强度增加。针对日本佐贺县高灵敏度的有明黏土地基上修建的分级加载的6.5 m高河堤下软黏土的物理力学性质的变化,说明分级加荷的重要性。现场软土地基为结构性黏土,有很高的灵敏度。而且该软黏土地基的渗透系数极低。因此采用塑料排水板进行了加固处理,施工过程中对地基土的物理与力学性质随固结过程的变化进行了测试。分析了其发展规律,结果表明地基土的单轴强度在250 d内增长了近1倍。 相似文献
10.
软土地基上路堤填筑的破坏性状分析 总被引：5，自引：0，他引：5
在软土地区建设高速公路、铁路等的填筑路堤越来越多,由于软土的不排水抗剪强度较低,软土地区路堤的填筑十分困难,而软土地基的渗透性很低,通常认为路堤的填筑是在不排水条件下进行。经典的设计方法是基于极限平衡法,无法考虑变形等因素,因此,能综合考虑稳定及变形等因素的有限元方法成为分析此类问题的一种有效手段。依据连云港铁路路堤在软土地基上的填筑试验资料,采用大变形有限元方法及Mohr-Coulomb模型,采用现场试验得到的土体强度值,对平面应变条件下路堤填筑的破坏性状及极限填筑高度等进行了分析,并对比了有限元分析结果及现场试验结果,结果表明,采用大变形有限元方法能够较准确的得到填筑路堤的极限高度,并有效地分析填筑路堤的破坏性状。 相似文献
11.
低路堤可以节约不可再生的土地资源, 浅层固化处置是低路堤软基处理科学、经济的方法。采用现场孔隙水压力静力触探（CPTU）对长江河漫滩相典型非均质性天然沉积软土层进行原位试验。应用二维有限差分方法对平面应变条件路堤荷载作用下有无浅层固化层的软土地基固结排水与沉降进行了仿真模拟,并应用三维有限差分方法对路面车辆重载作用下有无浅层固化层的路基及基底变形进行了三维数值仿真。结果表明：地基浅层固化层的设置改变了地基应力场的分布,通过应力扩散作用减小地基土体的附加应力,进而减小了地基土体的沉降量。基底固化层通过增强路基基底的刚度来增强路基的整体刚度,减小路基的变形,提高路基整体稳定性。 相似文献
12.
成层竖向排水井地基固结分析 总被引：3，自引：0，他引：3
实际工程中竖井地基具有成层性,有时竖井也并未完全打穿软土层。在竖井打设区满足竖井等应变固结理论、下卧层满足一维太沙基固结理论假设的基础上,将现有竖井地基固结理论推广到成层未打穿竖井地基情况。利用边界条件和竖直向连续条件,确定该系统的正交关系,并给出了其固结解答,该解具有广泛的适用性。通过对竖井打设区和下卧层层数的变化,即可获得现有关于简单未打穿竖井地基的固结解答。将该解答编制成应用程序,对一算例进行了分析。结果表明,平均固结度按孔压定义和按变形定义是不相同的,硬表层的存在会加快其下土层的固结。 相似文献
13.
土工织物与塑料排水板联合处理软基的效果分析 总被引：7，自引：0，他引：7
基于平面应变条件下的Biot固结理论,采用非线性有限元方法对土工织物加筋与塑料板排水联合使用处理软土路基的效果和机制进行了探讨。对比计算表明：在相同固结时间内加设排水板后路堤的竖向沉降大于无排水板情况下的相应值,路堤坡趾处的隆起变小,路堤的侧向位移也变小。塑料排水板极大地缩短了孔压的消散时间,加快了软土的固结进程,使软土地基的承载力得到较快的提高,从而提高了路堤的稳定性。加设排水板后筋材所分担的抗拉力也比无排水板情况下的抗拉力低。为了更好地发挥土工织物的加固效果,土工织物应尽量布置在高应力区域。加设排水板可以缩短路堤各固结阶段的静置时间而达到优化设计。 相似文献
14.
This paper presents a finite element procedure for the analysis of consolidation of layered soils with vertical drain using general one‐dimensional (1‐D) constitutive models. In formulating the finite element procedure, a Newton–Cotes‐type integration formula is used to avoid the unsymmetry of the stiffness matrix for a Newton (Modified Newton) iteration scheme. The proposed procedure is then applied for the consolidation analysis of a number of typical problems using both linear and non‐linear soil models. Results from this simplified method are compared with those from a fully coupled consolidation analysis using a well‐known finite element package. The average degree of consolidation, excess porewater pressure and average vertical effective stress are almost the same as those from the fully coupled analysis for both the linear and non‐linear cases studied. The differences in vertical effective stresses are tolerable except for the values near the vertical drain boundaries. The consolidation behaviour of soils below a certain depth of the bottom of vertical drain is actually one‐dimensional for the partially penetrating case. Therefore, there are not much differences in whether one uses a one‐dimensional model or a three‐dimensional model in this region. The average degree of consolidation has good normalized feature with respect to the ratio of well radius to external drainage boundary for the cases of fully penetrating vertical drain using a normalized time even in the non‐linear case. Numerical results clearly demonstrate that the proposed simplified finite element procedure is efficient for the consolidation analysis of soils with vertical drain and it has better numerical stability characteristics. This simplified method can easily account for layered systems, time‐dependent loading, well‐resistance, smear effects and inelastic stress–strain behaviour. This method is also very suitable for the design of vertical drain, since it greatly reduces the unknown variables in the calculation and the 1‐D soil model parameters can be more easily determined. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
15.
D. T. BergadoJ. C. ChaiN. Miura 《Computers and Geotechnics》1995,17(4):447-471
The behavior of a reinforced embankment on soft Bangkok clay has been analyzed by plane strain finite element method. The finite element analysis considers the selection of proper soil/reinforcement properties according to the relative displacement pattern of upper and lower interface elements. The large deformation phenomenon is simulated by updating the node coordinates, including those of the embankment elements above the current construction level, which ensures that the applied fill thickness simulates the actual field value. A full scale test reinforced embankment with a vertical face (wall) on Bangkok clay has been analyzed by the proposed finite element method, and the numerical results are compared with the field data. The response of a reinforced embankment on soft ground is principally controlled by the interaction between the reinforced soil mass and soft ground and the interaction between the grid reinforcement and the backfill soil. The tension in reinforcement and lateral displacement of the wall face varied during consolidation of foundation soil. The maximum tension force occurred in the reinforcement layer placed at the base of reinforced mass, due to bending of the reinforced mass resulting from differential settlements. It is considered necessary to account for the permeability variation of the soft ground foundation in the finite element analysis. 相似文献
16.
Ramli Nazir Hossein Moayedi Puspanathan Subramaniam Soheil Ghareh 《Arabian Journal of Geosciences》2017,10(23):515
Excessive total and differential settlement at the intersection of a surcharged prefabricated vertical drain (SPVD) and a rigid piled embankment on soft ground during the post-construction period leads to considerable time and costs being spent on repetitive remedial works in the future. This paper presents a sustainable design approach for high and long embankment filling on soft clay at the approach to the structure by introducing the intersection of an SPVD at the transition to a rigid piled embankment in order to regulate the differential settlement between the two conventional ground treatment approaches. This paper also presents a full-scale field study to validate the performance of the intersection of the SPVD at the transition to the rigid piled embankment. By introducing the intersection ground treatment, post-construction settlement and differential settlement are minimised significantly, while the post-construction total settlement at the rigid transition piled embankment (TPE) zone is reduced significantly by about 80 to 95% of the total settlement, as compared to a conventional TPE. 相似文献
17.
路堤下复合地基“三等沉区模型” 总被引：1，自引：0，他引：1
路堤下复合地基桩顶沉降小于桩间土沉降,桩体上部为负摩擦力,因此不能采用常规复合地基理论分析受力和变形。试验和数值分析表明,路堤下复合地基的路堤、桩身、下卧层范围内均存在一个等沉区,等沉区内同一水平面上不同点的沉降相同的区域。据此提出了“三等沉区模型”,该模型不但地基与桩体参数对复合地基的影响,而且可以考虑路堤高度、下卧层厚度、强度等参数对复合地基的影响。实测和数值模拟表明该模型是合理可行的。 相似文献
18.
面板对路堤式加筋土挡墙力学特性的影响 总被引：1，自引：0，他引：1
加筋土挡墙作为一种新型的轻型支挡结构,广泛应用于公路、铁路、港口等工程中。随着加筋土挡墙技术的发展,面板的类型也越来越丰富。利用Plaxis有限元软件,对路堤式加筋土挡墙进行了二维有限元计算分析。针对墙背水平土压力、垂直土压力、挡墙侧向位移、筋材应变和挡墙稳定系数等计算结果的分析,探讨了3种类型面板（返包式面板、整体式面板和拼装式面板）对路堤式加筋土挡墙力学性能的影响。研究结果表明,垂直和水平土压力的数值计算结果均小于理论值;相比较与其他两种面板的加筋土挡墙,返包式面板加筋土挡墙筋材的应变最大;面板类型对于加筋土挡墙的整体稳定性几乎没有影响。研究成果为实际工程的应用提供了理论指导。 相似文献
19.
基于等效塑性应变的三维边坡滑面搜索 总被引：4，自引：2，他引：2
边坡三维临界滑面的定位问题是边坡稳定性分析中尚未得以很好解决的一个重要问题。注意到临界滑面是由沿深部方向上的等效塑性应变的极大点所组成这一现象,在利用强度折减法将边坡带入临界平衡状态后,通过在水平面上设置一系列的垂直直线,并找出每条直线上的等效塑性应变最大值的位置,就得到了三维边坡滑面上离散点的分布。最后,采用被称为薄板光顺样条（thin-plate smoothing spline）函数的插值方法对滑面上的离散点进行了插值光顺处理,在不指定边坡滑动模式和滑面形状的前提下就可以得到三维边坡的临界滑面。通过在三维凸型边坡中的应用,体现了该方法在确定三维边坡临界滑面上的优越性。 相似文献
20.
考虑井阻和涂抹的砂井地基平面应变等效方法分析 总被引：14，自引：2，他引：14
根据固结度或平均孔压不变的条件,推导出考虑砂井阻力和涂抹效应的砂井地基平面应变等效公式,将砂井地基等效为砂墙地基进行计算,从而使复杂的空间问题转变为简单的平面问题。采用此方法时,只需对地基的渗透系数进行调整,计算方法简便易行,计算结果可以满足工程的需要,便于在实际工程中推广应用。 相似文献