首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
赵目军  王春帅  徐玲俊 《地下水》2010,32(6):125-128
分析了矿井的水文地质条件,对主要充水含水层进行了分析、划分和对比;对断层构造的导水性、富水性进行了分析。论述了水文地质边界条件。采用大井法和比拟法预测了矿井涌水量,对计算结果进行了评价。对二1煤层充水因素进行了分析,指出奥陶系白云质灰岩岩溶裂隙水为本区二1煤层充水的重要因素之一,并对断裂构造、地表水体、封闭钻孔对二1煤层开采的影响进行了分析。  相似文献   

2.
本文对北京地区中元古代及中生代火山岩的地质学、岩石学、矿物化学、地球化学、岩石成因学及构造环境学进行了综合研究。对火山岩的时空分布及成分变化进行了论述,对酸度频率及岩浆系列进行了分析,对构造环境及拉张距离进行了估算,对岩浆的来源及演化机理进行了探讨。  相似文献   

3.
对兰州碑林地质灾害概况做了全面介绍,对地质灾害成因做了详细分析,并进行了滑坡稳定性计算。依据滑坡稳定性分析,确定了排水、支挡、地基处理等治理方案,并对治理工程措施进行了详细介绍。对同类地质灾害的治理有一定的借鉴意义。  相似文献   

4.
在对研究区地质资料进行系统分析和野外实际调查的基础上,运用构造地质学、矿物岩石学及工程地质学,对该公路沿线地质特性进行了详细研究,总结了沿线地质灾害类型,对存在的地质灾害现状进行了评估,并对评估区进行了分区。研究结果对线路的施工及地质灾害防治等具有指导意义。  相似文献   

5.
阐述了沙颍河地表水环境质量、浅层地下水污染现状,对污染程度进行了分析,同时对地下水水质进行了评价,并对浅层地下水变化趋势进行了分析,提出了相应的防治措施。  相似文献   

6.
杨建平 《华北地质》2011,34(1):71-75
通过激电测深对内蒙古义盛店银多金属矿区进行了物探测量,并对所取得的数据进行了正反演处理,消除了地形对有用异常的影响,压制了局部干扰异常,突出了矿化异常,找到了深部矿化体的空间赋存状态及中心位置.经过钻探初步验证,见矿效果良好,显示出乐观的找矿前景.该方法对类似地区的找矿工作提供了可借鉴的找矿经验.  相似文献   

7.
某油田地下水污染特征分析   总被引:2,自引:0,他引:2  
某油田由于开采时间较长,石油的开采活动对地下水产生了影响.为了弄清对地下水的影响程度,对该区地下水进行了分层采样,并检测样品中的常规项目以及石油类,同时对其浓度进行了详细分析.研究以本区外围地下水作为背景值以及地下水的三类标准作为判断标准对地下水进行评价,得出本区地下水2/3受到了污染,其主要的污染物是石油类污染物与NH4 -N、NO2--N.论文对地下水中主要污染物的污染程度及其在地下水中的分布规律进行了分析,并对其来源进行了探讨与分析,最后对研究区地下水的污染防止与治理提出建议和方法.  相似文献   

8.
对 T E极化和 T M 极化情况下高阻和低阻基底垂直断层进行了研究,首先从理论上对断层的 T E极化的 M T电磁响应进行了数学推导,得到了解析表达式。对四种情况进行了编程计算,得到了大量图件,然后对图件进行了详细分析,总结出了断层的 M T 响应的诸多特征,最后指出了如何应用于 M T 资料的解释中。  相似文献   

9.
本文阐述了河南省南阳盆地浅层地下水污染现状,对污染程度进行了评价,同时对南阳盆地内地下水水质进行了计算与评价.并对浅层地下水污染趋势进行了分析,提出了相应的防治措施.  相似文献   

10.
地震数据采集系统延迟时研究与分析   总被引:2,自引:0,他引:2  
详细介绍了地震采集系统延迟时的因素,并根据系统的理论对产生的原因进行了论证。同时对实际生产中的测试方法进行了研究和分析;最后提出了新的测试方法,并对实际生产提出了合理的建议,取得了预期的效果。  相似文献   

11.
The explanation normally given for the tectonics of Sainte-Victoire Mountain, a dozen kilometres east of Aix-en-Provence, to the north of the limestone Provence, is incorrect. To the east, the morphology of the Sainte-Victoire is subdued, whereas to the west, before the mountain breaks savagely, the morphology is that of a young mountain as appears in Alpine landscapes. This unusual aspect in the region and the large subvertical faults with vertically striated surfaces that mark the massif to the south and to the west, induce the idea of strong vertical uplifts and caste doubt on the tectonic interpretation given in 1962 by Corroy et al. According to those authors, the Sainte-Victoire is a unit of Jurassic and Cretaceous formations overthrusting 1800 m to the south conglomerates of the Late Cretaceous or Palaeocene. New observations about the conglomerate transgression over the Jurassic and Cretaceous beds, and about the faults around and on the massif do not give evidence of an overthrusting but, on the contrary, induce the idea of a uplift, perhaps still active, in the form of a ‘piano key’ inclined to the northeast. To cite this article: J. Ricour et al., C. R. Geoscience 337 (2005).  相似文献   

12.
Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort.  相似文献   

13.
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.  相似文献   

14.
利用GC-MS(气相色谱—质谱仪),对采自湖北清江流域和尚洞洞顶的土壤样品与洞内石笋样品进行分析,发现土壤中存在的七个系列单甲基支链烷烃在所有的石笋样品中均可以找到,呈现相似的分布模式,石笋中七个系列支链烷烃有可能来自洞穴滴水携带的土壤中的支链烷烃,但是也不能排除石笋原地生长的微生物的贡献。烷基环己烷的分布在土壤与石笋中呈现了相似的分布模式,但是主峰碳数有所变化,高碳数部分与低碳数部分的相对含量也发生了变化。主要原因可能是微生物选择性降解的结果,也有可能是土壤与石笋中微生物种类分布差异所造成的。本次研究初步显示了相对封闭稳定的洞穴沉积物与上覆土壤层中生物标志化合物的异同。   相似文献   

15.
Stratigraphic units are defined and described for the Lower Carboniferous succession in the Walterstown-Kentstown area of Co. Meath, Ireland. A complete (unexposed) Courceyan succession from the terrestrial red bed facies of the Baronstown Formation to the Moathill Formation of the Navan Group has been penetrated in several boreholes. Although the lower part of the sequence is comparable with the Courceyan succession at Navan and Slane, the middle part of the sequence differs markedly in the Walterstown-Kentstown area and two new members, the Proudstown and Walterstown Members, are defined in the upper part of the Meath Formation. Syndepositional faulting was initiated during the Courceyan, probably in latest Pseudopolygnathus multistriatus or early Polygnathus mehli latus time. Movement on the ENE trending St. Patrick's Well Fault influenced the deposition of the Walterstown Member and the overlying Moathill Formation and was probably associated with the development of the East Midlands depocentre to the south of the area. A second episode of tectonism in the latest Courceyan or early Chadian resulted in uplift and erosion and the development of ‘block and basin’ sedimentation. Subsequent transgression of the uplifted block led to the establishment of the Kentstown Platform, bounded to the north, west and south by rocks of basinal facies. The Milverton Group (Chadian-Asbian), confined to this platform, unconformably overlies Courceyan or Lower Palaeozoic strata and is subdivided into three formations: Crufty Formation (late Chadian), Holmpatrick Formation (late Chadian-Arundian) and Mullaghfin Formation (late Arundian-Asbian). The Walterstown Fault controlled the western margin of the Kentstown Platform at this time. Contemporaneous basinal sediments of the Fingal Group (Lucan and Naul Formations) accumulated to the west of the Walterstown Fault and are much thicker than age-equivalent platform facies. Platform sedimentation ceased in latest Asbian to early Brigantian time with tectonically induced collapse and drowning of the platform; platform carbonates of the Mullaghfin Formation are onlapped northwards by coarse proximal basinal facies of the Loughshinny Formation. A distinct gravity anomaly in the Kentstown area suggests the presence of a granitoid body within the basement. The Kentstown Platform is therefore considered to have formed on a buoyant, granite-cored, footwall high analogous to the Askrigg and Alston Blocks of northern England.  相似文献   

16.
The penetration of rigid objects such as piles and penetrometers into soils creates a zone of soil disturbance around them. The extent of this disturbed zone influences the resistance of the moving rigid body. This paper presents a theoretical framework to analyze the resistance in the disturbed zone created by a shaft penetrating a clay soil. The soil is modeled as a viscous material after it reaches failure [critical state (CS)]. The results of this analysis show that the viscous drag stress component on the shaft surface is influenced by the size of disturbed zone that has reached CS around the shaft, the shear viscosity of the soil and the velocity profile (or strain rate) in the CS zone around the shaft. The size of CS zone, the velocity profile and the viscosity of soil are interdependent. Large variation in viscous drag occurs when the size of the CS soil zone is less than four times the shaft’s radius. Limiting drag occurs when the size of the CS soil zone exceeds six times the shaft’s radius. The theoretical velocity distribution of the movement of soil in the CS zone shows that the soil is dragged along with shaft in the near field (close to the shaft surface) and moves upwards in the far field.  相似文献   

17.
This study is based on an analysis of seismic, gravimetric and magnetic data to model the structure of the Dover Straits area. The Dover Straits are set in a transitional position within the Brabant para-autochthon, which lies between the Ardennes allochthon to the south and the Brabant Massif to the north. The seismic profiles show that this area is characterised by several superimposed Mesozoic basins, whose evolution has been controlled by the reactivation of Lower Palaeozoic faults. In common with the adjacent Weald–Wessex and southern North Sea basins, the Dover Straits area records a Jurassic extensional phase and a post-Cretaceous tectonic inversion. The geophysical modelling reveals the presence of a basement to these Mesozoic basins that exhibits Ordovician to Silurian structures, which cannot be detected on the seismic reflection profiles. In contrast to earlier interpretations, the modelling presented here suggests that the Brabant Massif continues southward beyond the Dover Straits and under the Brabant para-autochthon. Gravity data also provides evidence for the presence of granitic body at depth, in the vicinity of Km 27 on the seismic profile, which may have driven the uplift of the Silurian rocks in the area of the Straits. Similar granitic intrusions have been proposed to explain gravity anomalies along the Rhenohercynian Margin in Belgium, eastern and southern England. The geophysical modelling demonstrates the continuity of the basement and Mesozoic basin structures across the Dover Straits, suggesting a common geological evolution of the adjacent southern England–northern France regions. To cite this article: B. Minguely et al., C. R. Geoscience 337 (2005).  相似文献   

18.
About 40% of the water supply of Cairo, Egypt, is drawn from a groundwater reservoir located southeast of the Nile Delta. Several thousand shallow wells supply drinking water to the farmers from the same groundwater reservoir, which is recharged by seepage from Ismailia canal, the irrigation canal network, and other wastewater lagoons in the same areas. Sewage water lagoons were located at the high ground of the area, recharging contaminated water into the aquifer. Since the groundwater in this area is used for drinking purposes, it was decided to treat the sewage water recharging the aquifer for health reasons. In this paper a solution to the problem is presented using an injection well recharging good quality water into the aquifer. A pumping well located at a distance downstream is used to pump the contaminated water out of the aquifer. A three-dimensional solute transport model was developed to study the concentration distribution with remediation time in the contaminated zone.  相似文献   

19.
ABSTRACT Estuarine sediments commonly form major sinks for contaminants released during industrial activity. Many industrial processes lead to the release of metals initially in solution, which can then be adsorbed on to, for example, Fe hydroxides or clay minerals. However, in the mining industry, there are two major contaminant waste streams: (1) metals discharged in solution via mine drainage; and (2) particulate grains of the ore‐forming or related minerals released after ore processing. The release of particulate waste can have a major long‐term impact on environmental geochemistry. In this study, we have mapped the distribution of arsenic, copper, tin and zinc within the surficial sediments of the Fal Estuary, Cornwall, UK, an area that drains a historically important polymetallic mining district. There are clear spatial variations in the contaminants, with the highest levels (> 2800 p.p.m. As, > 5000 p.p.m. Cu, > 3000 p.p.m. Sn and > 6000 p.p.m. Zn) within Restronguet Creek on the western side of the estuary. Mineralogical studies show that small (< 20 µm) grains of detrital arsenopyrite, chalcopyrite, cassiterite and sphalerite are very abundant within the surface sediments. Most of the sulphide grains are fractured, but mineralogically unaltered, although some grains show alteration rims caused by oxidation of the sulphides. The geochemistry and mineralogy are indicative of sediment supply from the discharge of particulate waste into the estuary during historical mining activity. Subsequently, this particulate waste has been largely physically and biologically reworked within the surface sediments. Although considerable effort has been made to minimize contaminants released via mine drainage into the estuary, the potential flux of contaminants present within the intertidal and subtidal sediments has not been addressed. Benthic invertebrates living within the area have adapted to be metal tolerant, and it is likely that the dominant source of bioavailable metals is a result of alteration of the particulate mine waste present within the intertidal and subtidal sediments.  相似文献   

20.
Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature. Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the applied pressure.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号