共查询到20条相似文献，搜索用时 734 毫秒
1.
为研究整体开洞墙体中发生底层窗间墙破坏模式时墙体的抗震性能,对一砌体结构缩尺开洞墙体模型展开多点同步加载拟静力试验。分析了各层墙体与整片墙的破坏特征、承载与变形能力、滞回耗能特性、刚度退化规律及延性表现,重点研究了底层窗间墙位于整体结构中时其破坏过程与变形规律。试验结果表明:破坏模式相同的开洞墙体较单独墙肢抗震性能有所不同,各工况加载峰值点的上升与下降过程更为缓慢、滞回曲线更为饱满、刚度退化过程更为缓和以及延性特征更为明显。基于底层窗间墙破坏模式,依据现行规范中开洞墙体承载力计算方法所得结果与试验结果吻合,但强弱构件失效机制无从体现。试验结果可为探求砌体结构合理设计方法与实现开洞墙体延性破坏模式提供依据。 相似文献
2.
Displacement capacity of masonry piers: parametric numerical analyses versus international building codes 总被引：1，自引：1，他引：0
Maurizio Orlando Luca Salvatori Paolo Spinelli Mario De Stefano 《Bulletin of Earthquake Engineering》2016,14(8):2259-2271
The nonlinear behaviour of masonry piers loaded in their plane is investigated by parametric numerical simulations. Each pier has a cantilever scheme, is loaded by a constant axial load and is subjected to an increasing horizontal displacement at the top. The macro-modelling approach is used to perform numerical analyses, adopting two different constitutive laws: a total strain crack model and a plastic model. The numerical model is calibrated on a block-masonry type for which experimental tests are available in literature. Parametric numerical simulations are performed by varying the aspect-ratio and the compression level, in order to assess the influence of such parameters on both shear strength and displacement capacity. By comparing numerical results with formulas of international codes, a good agreement for the shear strength is obtained, while significant differences are observed for the displacement capacity, which is influenced by both parameters. The authors propose a simple empirical formula for the displacement capacity, obtained by fitting the numerical results. The expression can be useful in the practical design for considering the influence of aspect-ratio and compression level, currently neglected by building codes. 相似文献
3.
The seismic response of rocking frames that consist of a rigid beam freely supported on rigid freestanding rectangular piers has received recent attention in the literature. Past studies have investigated the special case where, upon planar rocking motion, the beam maintains contact with the piers at their extreme edges. However, in many real scenarios, the beam‐to‐pier contact lies closer to the center of the pier, affecting the overall stability of the system. This paper investigates the seismic response of rocking frames under the more general case which allows the contact edge to reside anywhere in‐between the center of the pier and its extreme edge. The study introduces a rocking block model that is dynamically equivalent to a rocking frame with vertically symmetric piers of any geometry. The impact of top eccentricity (ie, the distance of the contact edge from the pier's vertical axis of symmetry) on the seismic response of rocking frames is investigated under pulse excitations and earthquake records. It is concluded that the stability of a top‐heavy rocking frame is highly influenced by the top eccentricity. For instance, a rocking frame with contacts at the extreme edges of the piers can be more seismically stable than a solitary block that is identical to one of the frame's piers, while a rocking frame with contacts closer to the centers of the piers can be less stable. The concept of critical eccentricity is introduced, beyond which the coefficient of restitution contributes to a greater reduction in the response of a frame than of a solitary pier. 相似文献
4.
沿着摇摆桥墩的概念提出一种限制位移桥墩连续刚构桥体系。该体系通过对连续刚构桥墩底和承台之间采取一定措施,使桥梁在地震发生时能够在限制的位移量内活动,减小输入到桥梁结构中的能量,达到减震的目的。通过对一座铁路连续刚构桥的分析,发现这种限制位移桥墩连续刚构桥体系能大幅减小桥墩的延性和强度地震需求,减震效果明显,在选择合适的限制位移量的情况下,可保证桥墩在高烈度罕遇地震作用下几乎保持弹性工作状态,震后经简单处理即可保证使用功能,为震后救援工作带来极大便利,也大大减少了修复成本。 相似文献
5.
为适应施工期短的严/高寒地区和近海铁路桥梁工程发展,提高铁路桥梁工程的施工效率和工程质量.文中提出了一种用于铁路桥梁工程中的模块化预制拼装实心桥墩,该桥墩不仅可以纵向节段连接,还可以通过多个可互连的模块水平连接.基于ABAQUS程序,开展了铁路桥梁模块化预制拼装桥墩在单调、往复荷载作用下力学性能数值分析,对该桥墩的承载... 相似文献
6.
基于OpenSEES平台,以某近海刚构桥桥墩为例,选取符合场地类型的地震波,并根据地震记录构造主余震序列。运用"能力需求比"分析方法建立不同服役时间节点桥墩控制截面在不同损伤状态条件下的地震易损性曲线,研究氯离子侵蚀和主余震序列对桥墩抗震性能的影响。结果表明:同一损伤状态的超越概率随着服役时间延长和PGA增大而不断变大,且随着损伤状态等级提高,超越概率逐渐降低。轻微损伤状态下,主余震序列对桥墩易损性影响较小;中等损伤、严重破坏和完全倒塌状态下,同一服役期,考虑主余震序列作用下桥墩的超越概率相比于仅考虑主震作用明显增大。 相似文献
7.
Shivakumar Khaple Prashanth Reddy Hanmaiahgari Roberto Gaudio Subhasish Dey 《Acta Geophysica》2017,65(5):957-975
Results of an experimental study on the countermeasure of scour depth at circular piers are presented. Experiments were conducted for pier scour with and without a splitter plate under a steady, uniform clear-water flow condition. The results of pier scour without splitter plate were used as a reference. Different combinations of lengths and thicknesses of splitter plates were tested attaching each of them to a pier at the upstream vertical plane of symmetry. Two different median sediment sizes (d 50 = 0.96 and 1.8 mm) were considered as bed sediment. The experimental results show that the scour depth consistently decreases with an increase in splitter plate length, while the scour depth remains independent of splitter plate thickness. In addition, temporal evolution of scour depth at piers with and without a splitter plate is observed. The best combination is found to be with a splitter plate thickness of b/5 and a length of 2b. Here, b denotes the pier diameter. An empirical formula for the estimation of equilibrium scour depth at piers with splitter plates is obtained from a multiple linear regression analysis of the experimental data. The flow fields for various combinations of circular piers with and without splitter plate including plain bed and equilibrium scour conditions were measured by using an acoustic Doppler velocimeter. The turbulent flow fields for various configurations are investigated by plotting the velocity vectors and the turbulent kinetic energy contours on vertical and horizontal planes. The splitter plate attached to the pier deflects the approach flow and thus weakens the strength of the downflow and the horseshoe vortex, being instrumental in reducing the equilibrium scour depth at piers. The proposed method of pier scour countermeasure is easy to install and cost effective as well. 相似文献
8.
Watercourse morphology is affected by local scouring when the flow interferes with anthropic structures. Controlling the scour hole size is of predominant importance to guarantee bridge safety as well as to limit the variations of river morphology. A combined countermeasure against bridge pier scour is proposed and tested in order to reduce the maximum scour depth and deviate it away from the bridge foundation. In the first part of the laboratory campaign, combination of two countermeasures (bed-sill and collar) was evaluated for a circular pier under clear-water and live-bed steady flow conditions. The proposed combined countermeasure exhibited an efficiency of about 64% in terms of scour depth reduction. Afterwards, it was tested in unsteady flow conditions, first for a circular pier, then in the case of a rectangular pier with round nose and tail, two circular in-line piers and two rectangular in-line piers, under a hydrograph with a peak flow velocity slightly above the threshold condition of sediment motion. Results showed that the combined countermeasure had an efficiency of about 63% for a single circular pier; however, higher efficiency (about 75%) was obtained in applications to rectangular pier and two in-line circular or rectangular piers. 相似文献
9.
Biaxial testing of unbonded post‐tensioned rocking bridge piers with external replacable dissipaters
The biaxial response of two bridge piers is experimentally investigated. A post‐tensioned precast bridge pier with external replaceable mild‐steel dissipaters is tested under biaxial loading. The performance of the post‐tensioned bridge pier is compared with a conventionally reinforced monolithic bridge pier. The experimental biaxial response is then compared with previous uniaxial experimental testing of identical bridge piers to understand the influence of biaxial loading, specifically concerning post‐tensioned rocking sections. A 3‐dimensional moment–curvature and moment–rotation analysis program is created to generate the monotonic section response of a conventional and post‐tensioned bridge pier. After comparing the accuracy of the section analysis program to the experimental testing of the monolithic pier, the program is validated against the experimental testing of the post‐tensioned bridge pier. This section analysis program is then used in the calibration of a macro‐model to capture the entire cyclic response of the post‐tensioned bridge pier. The macro‐model adopts multiple linear‐elastic compression‐only springs at the rocking interface, combined with non‐linear inelastic springs for each of the mild‐steel dissipaters and returns encouraging results at both local and global levels. The paper concludes with a number of biaxial moment‐interaction design charts for monolithic and post‐tensioned bridge piers as a function of mechanical and geometric section properties. The design charts define the biaxial yield surface at nominal yield and at the design section capacity defined by one of three material limit states. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
10.
11.
Many older unreinforced masonry (URM) buildings feature timber floors and solid brick masonry. Simple equivalent frame models can help predicting the expected failure mechanism and estimating the strength of a URM wall. When modelling a URM wall with an equivalent frame model rather than, for example, a more detailed simplified micro-model, the strengths of the piers and spandrels need to be estimated from mechanical or empirical models. Such models are readily available for URM piers, which have been tested in many different configurations. On the contrary, only few models for spandrel strength have been developed. This paper reviews these models, discusses their merits, faults and compares the predicted strength values to the results of recent experimental tests on masonry spandrels. Based on this assessment, the paper outlines recommendations for a new set of strength equations for masonry spandrels. 相似文献
12.
钢管混凝土桥墩抗震性能试验研究 总被引：1，自引：0，他引：1
为研究钢管混凝土桥墩的抗震性能,对钢管混凝土桥墩和钢筋混凝土桥墩进行了拟静力对比试验研究。根据试件的破坏发展过程以及各试件的滞回曲线和骨架曲线,分析了其滞回性能、耗能能力、延性、强度退化及刚度退化等抗震性能。试验结果表明,钢管混凝土桥墩的抗震性能明显好于钢筋混凝土桥墩。在含钢率和轴力相同的情况下,钢管混凝土桥墩的滞回曲线比钢筋混凝土桥墩丰满得多,前者的耗能能力约为后者的4.46倍,钢管混凝土桥墩的延性大于钢筋混凝土桥墩;随着轴压比的增大,钢管混凝土桥墩延性有所下降,强度退化加快,但对其刚度退化的影响不大。 相似文献
13.
为克服利用OpenSEES进行预制拼装桥墩纤维模型分析时干接缝区域模拟困难的问题,提出一种由刚性单元、非线性梁柱单元、零长度单元配合ENT单压材料组成的干接缝单元。通过基于干接缝单元的纤维模型数值模拟结果与文献中的1:3.5缩尺桥墩拟静力试验结果对比发现:该干接缝单元不仅解决了墩身混凝土压溃带来的模型不收敛问题,而且考虑了墩身节段宽度对干接缝区域的影响,使预制拼装桥墩干接缝处的力学性能更接近实际的力学性能;数值模拟结果与试验结果吻合较好证明了该干接缝单元用于模拟预制拼装桥墩干接缝区域的可行性。在此基础上设置耗能钢筋、外包钢管和墩底橡胶支承垫层作为桥墩附加耗能装置,对预制拼装桥墩进行拟静力循环加载模拟,研究不同耗能装置对预制拼装桥墩的滞回能力、预应力筋内力、累积耗能、残余位移以及等效刚度等性能参数的影响。结果表明:设置耗能钢筋和外包钢管可以显著提高预制拼装桥墩的耗能能力、水平承载力和刚度,降低预应力损失;设置墩底橡胶支承垫层也能提高预制拼装桥墩的耗能能力,但会降低桥墩的水平承载力和刚度,应根据桥墩自身刚度谨慎选择橡胶垫层的刚度。 相似文献
14.
Masonry buildings are often characterized by geometric irregularities. In many cases, such buildings meet global regularity requirements provided by seismic codes, but they are composed by irregular walls with openings. The latter are masonry walls characterized by (i) openings of different sizes, (ii) openings misaligned in the horizontal and/or vertical direction, or (iii) a variable number of openings per story. An irregular layout of openings can induce not only a nonuniform distribution of gravity loads among masonry piers but also unfavorable damage localizations resulting in a premature collapse of the wall and hence a higher seismic vulnerability. This paper is aimed at providing a simplified methodology to assess the effects of irregularities on the in‐plane seismic capacity of unreinforced masonry (URM) walls with openings. To this end, a macroelement method was developed and validated through experimental results available in the literature. The proposed methodology was based on the quantification of wall irregularities by means of geometric indices and their effects on seismic capacity of URM walls with openings through both sensitivity and regression analyses. Sensitivity analysis was based on a high number of static pushover analyses and allowed to assess variations in key seismic capacity parameters. Regression analysis let to describe each capacity parameter under varying irregularity index, providing empirical models for seismic assessment of irregular URM walls with openings. The in‐plane seismic capacity was found to be significantly affected by wall irregularities, especially in the case of openings with different heights. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
15.
《国际泥沙研究》2022,37(6):737-753
An experimental investigation on flow fields within the scour holes upstream and downstream of circular piers positioned in tandem and staggered arrangements is reported and compared with isolated piers on mobile beds with uniform sediment. The instantaneous bed elevations and instantaneous three dimensional (3D) velocities were measured using a 5 MHz Ultrasonic Ranging system and 16 MHz micro down looking acoustic Doppler velocimeter, respectively. The velocity and flow depth were measured at different locations under near equilibrium bed scour conditions. The measured 3D velocities were processed for the computation of flow parameters, such as velocity fields, streamline patterns, vorticity fields, and circulation. Furthermore, turbulence intensities, turbulent kinetic energy, Reynolds shear stresses, and bed shear stresses around the piers for all three pier configurations were computed from the detrended velocity signals to identify significant differences in the flow parameters and turbulence in the tandem and staggered pier arrangements as compared to those for an isolated pier. A recirculation zone was found near the bed in front of the rear pier in the tandem case from the streamline patterns. The vortices in the bi-vortex system were observed to be opposite to each other in the gap between the three piers in the staggered case. A strong secondary vortex also was observed apart from the primary vortex at the foot of the pier (θ = 0°) in all the three configurations. The strength of the horseshoe vortex (combination of primary and secondary vortices) was found to be higher at the front piers of the staggered arrangement as compared to those of the tandem piers, followed by the isolated pier. The bed shear stresses were found to be higher for the staggered piers than for the tandem piers in the direction of flow (θ = 0°). However, a 50% reduction in the bed shear stresses was observed behind the tandem piers at θ = 180°. The study reported in this paper provides the foundation for further investigation of countermeasures against local scour around tandem and staggered bridge piers on a mobile bed with non-uniform sediment. 相似文献
16.
Seismic response of unreinforced masonry (URM) buildings is largely influenced by nonlinear behavior of spandrels, which provide coupling between piers under in‐plane lateral actions. Seismic codes do not appropriately address modeling and strength verification of spandrels, adapting procedures originally proposed for piers. Therefore, research on spandrels has received significant attention in some earthquake‐prone countries, such as Italy and New Zealand. In the last years, the authors of this paper have performed both monotonic and cyclic in‐plane lateral loading tests on full‐scale masonry walls with single opening and different spandrel types. Those tests were carried out in a static fashion and with displacement control. In this paper, experimental outcomes for two as‐built specimens are presented and compared with those obtained in the past for another as‐built specimen with a wooden lintel above the opening. In both newly tested specimens, the masonry above the opening was supported by a shallow masonry arch. In one of those specimens, a reinforced concrete (RC) bond beam was realized on top of the spandrel, resulting in a composite URM‐RC spandrel. Then, the influence of spandrel type is analyzed in terms of observed damage, force–drift curves, and their bilinear idealizations, which allowed to compare displacement ductility and overstrength of wall specimens. Furthermore, effects of rocking behavior of piers are identified, highlighting their relationship with hysteretic damping and residual drifts. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
Shivakumar Khaple Prashanth Reddy Hanmaiahgari Roberto Gaudio Subhasish Dey 《Acta Geophysica》2017,65(1):29-46
In this study, three kinds of pier arrangements were tested. They are (i) two piers in tandem, (ii) two piers in staggered arrangement, and (iii) three piers in symmetrically staggered arrangements. In the arrangement of two piers in tandem, the equilibrium scour depth at downstream pier decreases with an increase in downstream distance up to approximately eight times pier diameter and then increases with further increase in downstream distance. However, the scour depth at downstream pier is always smaller than that at upstream pier. In the arrangement of two staggered piers, the scour depth at the downstream pier for L/b = 4, where L is the offset distance and b is the pier diameter, is the same as that of the upstream pier at S = 8b, where S is the streamwise spacing or distance between piers. Further, for three piers in staggered arrangement, as the lateral spacing between downstream piers increases, the equilibrium scour depth at downstream pier decreases. 相似文献
18.
Uplift of deck or footings in bridges with distributed mass subjected to transverse earthquake 
下载免费PDF全文
下载免费PDF全文 Michael N. Fardis 《地震工程与结构动力学》2015,44(15):2755-2773
The eigenvalue problem is analytically formulated in symmetric bridges with distributed mass and moment of inertia under transverse earthquake. The piers are elastically supported on the ground. The deck is monolithically connected to one or two piers for all degrees of freedom and restrained or transversely free at the abutments. The characteristic equation, symmetric normal modes, modal participation factors, and participating mass ratios are given analytically. The problem is expressed in terms of few dimensionless parameters: (i) the radius of gyration of the deck mass divided by the pier height; (ii) the ratio of the rotational stiffness of a footing to that of the pier at the base; (iii) the ratio of flexural stiffness of the outer spans to those of the pier; (iv) the ratio of torsional stiffness of side spans to the rotational stiffness of the pier top; (v) for two piers, the side‐to‐central‐span ratio. Modal response spectrum analysis gives the moment at the base of the footings and the torque in the deck at its supports on the abutments as ratios to the values at incipient uplifting from the ground or the bearings. The peak ground acceleration of the motion at the onset of either one of these two types of nonlinearity is depicted as a function of the dimensionless parameters and the fundamental period of an elastic deck supported only at the abutments, or of a rigid deck on piers fixed against rotation at top and bottom. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
19.
20.
钢-混凝土组合连续刚构桥的关键在于墩梁连接节点,设计了双层钢箱混凝土、钢筋混凝土和钢管混凝土等3种不同类型墩柱的连接节点构造形式。基于OpenSees平台建立了墩柱截面纤维有限元模型,并利用双层钢箱混凝土墩柱拟静力试验结果验证了数值模型的有效性,进而基于纤维有限元模型对3种不同类型墩柱节点进行了非线性滞回性能计算分析。结果表明:纤维模型能够模拟拟静力作用下组合连续刚构桥墩梁连接的滞回性能,双层钢箱混凝土墩柱与钢箱-混凝土组合梁连接节点的整体抗震性能要优于钢筋混凝土墩柱和实心钢管混凝土墩柱与钢箱-混凝土组合梁的连接节点,建议的刚性节点构造合理和传力路径明确,可为钢-混凝土组合连续刚构桥设计提供参考。 相似文献