首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The C1XS X-ray Spectrometer on Chandrayaan-1   总被引：1，自引：0，他引：1  
The Chandrayaan-1 X-ray Spectrometer (C1XS) is a compact X-ray spectrometer for the Indian Space Research Organisation (ISRO) Chandrayaan-1 lunar mission. It exploits heritage from the D-CIXS instrument on ESA's SMART-1 mission. As a result of detailed developments to all aspects of the design, its performance as measured in the laboratory greatly surpasses that of D-CIXS. In comparison with SMART-1, Chandrayaan-1 is a science-oriented rather than a technology mission, leading to far more favourable conditions for science measurements. C1XS is designed to measure absolute and relative abundances of major rock-forming elements (principally Mg, Al, Si, Ca and Fe) in the lunar crust with spatial resolution ?25 FWHM km, and to achieve relative elemental abundances of better than 10%.  相似文献   

2.
The UK-built Chandrayaan-1 X-ray Spectrometer (C1XS) is flying as an ESA instrument on India's Chandrayaan-1 mission to the Moon. The Chandrayaan-1 mission launched on the 22nd October 2008 and entered a 100 km polar lunar orbit on the 12th November 2008. C1XS builds on experience gained with the earlier D-CIXS instrument on SMART-1, but will be a technically much more capable instrument. Here we describe the instrument design.  相似文献   

3.
The Chandrayaan-1 X-ray Spectrometer (C1XS) flown on-board the first Indian lunar mission Chandrayaan-1, measured X-ray fluorescence spectra during several episodes of solar flares during its operational period of ∼9 months. The accompanying X-ray Solar Monitor (XSM) provided simultaneous spectra of solar X-rays incident on the Moon which are essential to derive elemental chemistry. In this paper, we present the surface abundances of Mg, Al, Si, Ca and Fe, derived from C1XS data for a highland region on the southern nearside of the Moon. Analysis techniques are described in detail including absolute X-ray line flux derivation and conversion into elemental abundance. The results are consistent with a composition rich in plagioclase with a slight mafic mineral enhancement and a Ca/Al ratio that is significantly lower than measured in lunar returned samples. We suggest various possible scenarios to explain the deviations.  相似文献   

4.
The D-CIXS X-ray spectrometer on ESA's SMART-1 mission will provide the first global coverage of the lunar surface in X-rays, providing absolute measurements of elemental abundances. The instrument will be able to detect elemental Fe, Mg, Al and Si under normal solar conditions and several other elements during solar flare events. These data will allow for advances in several areas of lunar science, including an improved estimate of the bulk composition of the Moon, detailed observations of the lateral and vertical nature of the crust, chemical observations of the maria, investigations into the lunar regolith, and mapping of potential lunar resources. In combination with information to be obtained by the other instruments on SMART-1 and the data already provided by the Clementine and Lunar Prospector missions, this information will allow for a more detailed look at some of the fundamental questions that remain regarding the origin and evolution of the Moon.  相似文献   

5.
The X-ray Solar Monitor (XSM) on the Indian lunar mission Chandrayaan-1 was flown to complement lunar elemental abundance studies by the X-ray fluorescence experiment C1XS. XSM measured the ≈?1.8?–?20 keV solar X-ray spectrum during its nine months of operation in lunar orbit. The soft X-ray spectra can be used to estimate absolute coronal abundances using intensities of emission-line complexes and the plasma temperature derived from the continuum. The best estimates are obtained from the brightest flare observed by XSM: a C2.8-class flare. The well-known first-ionization potential (FIP) effect is observed; abundances are enhanced for the low-FIP elements Fe, Ca, and Si, while the intermediate-FIP element S shows values close to the photospheric abundance. The derived coronal abundances show a quasi-mass-dependent pattern of fractionation.  相似文献   

6.
The demonstration of a compact imaging X-ray spectrometer (D-CIXS), which flew on ESA's SMART-1 mission to the Moon (Racca et al., 2001; Foing et al., 2006), was designed to test innovative new technologies for orbital X-ray fluorescence spectroscopy. D-CIXS conducted observations of the lunar surface from January 2005 until SMART-1 impacted the Moon in September 2006. Here, we present scientific observations made during two solar flare events and show the first detection of Titanium Kα from the lunar surface. We discuss the geological implications of these results. We also discuss how experience from D-CIXS has aided the design of a similar instrument (Chandrayaan-1 X-ray Spectrometer (C1XS)) that was launched on the 22nd October 2008 on India's Chandrayaan-1 mission to the Moon.  相似文献   

7.
We have conducted laboratory experiments as an analogue to planetary XRF (X-ray fluorescence) missions in order to investigate the role of changing incidence (and phase) angle geometry and sample grain-size on the intensity of XRF from regolith-like samples. Our data provide evidence of a grain-size effect, where XRF line intensity decreases with increasing sample grain-size, as well as an almost ubiquitous increase in XRF line intensity above incidence angles of ∼60°. Data from a lunar regolith simulant are also used to test the accuracy of an XRF abundance algorithm developed at the Rutherford Appleton Laboratory (RAL), which is used to estimate the major element abundance of the lunar surface from Chandrayaan-1 X-ray Spectrometer (C1XS) XRF data. In ideal situations (i.e., when the input spectrum is well defined and the XRF spectrum has a sufficient signal to noise ratio) the algorithm can recover a known rock composition to within 1.0 elemental wt% (1σ).  相似文献   

8.
The thermal evolution of the Moon as it can be defined by the available data and theoretical calculations is discussed. A wide assortment of geological, geochemical and geophysical data constrain both the present-day temperatures and the thermal history of the lunar interior. On the basis of these data, the Moon is characterized as a differentiated body with a crust, a 1000-km-thick solid mantle (lithosphere) and an interior region (core) which may be partially molten. The presence of a crust indicates extensive melting and differentiation early in the lunar history. The ages of lunar samples define the chronology of igneous activity on the lunar surface. This covers a time span of about 1.5 billion yr, from the origin to about 3.16 billion yr ago. Most theoretical models require extensive melting early in the lunar history, and the outward differentiation of radioactive heat sources.Thermal history calculations, whether based on conductive or convective computation codes define relatively narrow bounds for the present day temperatures in the lunar mantle. In the inner region of the 700 km radius, the temperature limits are wider and are between about 100 and 1600°C at the center of the Moon. This central region could have a partially or totally molten core.The lunar heat flow values (about 30 ergs/cm2s) restrict the present day average uranium abundance to 60 ± 15 ppb (averaged for the whole Moon) with typical ratios of K/U = 2000 and Th/U = 3.5. This is consistent with an achondritic bulk composition for the Moon.The Moon, because of its smaller size, evolved rapidly as compared to the Earth and Mars. The lunar interior is cooling everywhere at the present and the Moon is tectonically inactive while Mars could be and the Earth is definitely active.  相似文献   

9.
We propose a technique that interpolates available lunar prospector gamma-ray spectrometer (GRS) data using Clementine UVVIS spectral reflectance images. The main idea is to use low resolution GRS data as a “ground truth” to establish relationships linking optical data and geochemical information maximizing the respective correlation coefficients. Then the relationships and Clementine UVVIS data are used to derive elemental abundance maps with significantly improved spatial resolution. The main limitation of the technique is its dependence on how well the abundance of the elements correlates with the Clementine UVVIS data. The technique can also be applied to analysis of coming D-CIXS/Smart-1 and AMIE/Smart-1 data to increase resolution of lunar compositional maps. As an illustration of the suggested technique, maps for the elements Fe, Ti, O, Al, Ca, and Mg with pixel size 15 km×15 km are presented. The Fe and Ti distributions resemble qualitatively to the maps obtained with the well-known technique by lucey et al. (2000a. Lunar iron and titanium abundance algorithms based on final processing of Clementine ultraviolet-visible images. J. Geophys. Res. 105, 20,297-20,306), though in our case the ranges of Fe and Ti variations are, respectively, wider and narrower than for lucey's maps. New maps for the elements Fe, Ti, O, Al, Ca, and Mg appear to be informative. For instance, the map of oxygen abundance demonstrates an anomaly in the crater Tycho. The maps of Fe and Al contents show for highland regions slight variations related to maturity degree. Reliability of this relation is confirmed with lunar sample data. The reason of the correlation between chemical composition and exposition age of the lunar surface can be the global transport of the lunar surface material due to meteorite impacts.  相似文献   

10.
The European SMART-1 mission to the Moon, primarily a testbed for innovative technologies, was launched in September 2003 and will reach the Moon in 2005. On board are several scientific instruments, including the point-spectrometer SMART-1 Infrared Spectrometer (SIR). Taking into account the capabilities of the SMART-1 mission and the SIR instrument in particular, as well as the open questions in lunar science, a selection of targets for SIR observations has been compiled. SIR can address at least five topics: (1) Surface/regolith processes; (2) Lunar volcanism; (3) Lunar crust structure; (4) Search for spectral signatures of ices at the lunar poles; and (5) Ground truth and study of geometric effects on the spectral shape. For each topic we will discuss specific observation modes, necessary to achieve our scientific goals. The majority of SIR targets will be observed in the nadir-tracking mode. More than 100 targets, which require off-nadir pointing and off-nadir tracking, are planned. It is expected that results of SIR observations will significantly increase our understanding of the Moon. Since the exact arrival date and the orbital parameters of the SMART-1 spacecraft are not known yet, a more detailed planning of the scientific observations will follow in the near future.  相似文献   

11.
The distribution of minerals on the lunar surface is information which could contribute to studying lunar origin and evolution. In this paper, the distribution of clinopyroxene, orthopyroxene, olivine, ilmenite, and plagioclase on the lunar surface has been mapped based on Hapke radiative transfer model and linear unmixing of spectra with Clementine UVVIS/NIR data. The results have been validated on the basis of minerals modal abundance data of the Apollo samples, and problems in the minerals abundance mapping have been analyzed. The validation based on analysis data of Apollo samples indicates that plagioclase mapped in this paper represents the total abundance of plagioclase and agglutinitic glass. The minerals mapping results show that the lunar surface is mainly composed of pyroxene, plagioclase, agglutinitic glass, and ilmenite. Basalt in the lunar mare is mainly composed of clinopyroxene and ilmenite, and lunar highland is mainly composed of plagioclase and agglutinitic glass. Orthopyroxene is mainly distributed on the north of Mare Imbrium, on the south of Maria and Aitken Basin. According to our results, there is probably no large area of olivine distribution on the lunar surface which is different from earlier published results. Therefore, emphasis should be put on the olivine distribution in the minerals mapping using hyperspectral data such as M3 of Chandrayaan-1 and IIM of ChangE-1.  相似文献   

12.
Abstract— Lunar meteorite Queen Alexandra Range 93069 is a clast-rich, glassy-matrix regolith breccia of ferroan, highly aluminous bulk composition. It is similar in composition to other feldspathic lunar meteorites but differs in having higher concentrations of siderophile elements and incompatible trace elements. Based on electron microprobe analyses of the fusion crust, glassy matrix, and clasts, and instrumental neutron activation analysis of breccia fragments, QUE 93069 is dominated by nonmare components of ferroan, noriticanorthosite bulk composition. Thin section QUE 93069,31 also contains a large, impact-melted, partially devitrified clast of magnesian, anorthositic-norite composition. The enrichment in Fe, Sc, and Cr and lower Mg/Fe ratio of lunar meteorites Yamato 791197 and Yamato 82192/3 compared to other feldspathic lunar meteorites can be attributed to a small proportion (5–10%) of low-Ti mare basalt. It is likely that the nonmare components of Yamato 82192/3 are similar to and occur in similar abundance to those of Yamato 86032, with which it is paired. There is a significant difference between the average FeO concentration of the lunar highlands surface as inferred from the feldspathic lunar meteorites (mean: ～5.0%; range: 4.3–6.1%) and a recent estimate based on data from the Clementine mission (3.6%).  相似文献   

13.
Lunar meteorites provide important new samples of the Moon remote from regions visited by the Apollo and Luna sample return missions. Petrologic and geochemical analysis of these meteorites, combined with orbital remote sensing measurements, have enabled additional discoveries about the composition and age of the lunar surface on a global scale. However, the interpretation of these samples is limited by the fact that we do not know the source region of any individual lunar meteorite. Here, we investigate the link between meteorite and source region on the Moon using the Lunar Prospector gamma ray spectrometer remote sensing data set for the elements Fe, Ti, and Th. The approach has been validated using Apollo and Luna bulk regolith samples, and we have applied it to 48 meteorites excluding paired stones. Our approach is able broadly to differentiate the best compositional matches as potential regions of origin for the various classes of lunar meteorites. Basaltic and intermediate Fe regolith breccia meteorites are found to have the best constrained potential launch sites, with some impact breccias and pristine mare basalts also having reasonably well‐defined potential source regions. Launch areas for highland feldspathic meteorites are much less well constrained and the addition of another element, such as Mg, will probably be required to identify potential source regions for these.  相似文献   

14.
We suggest a technique to determine the chemical and mineral composition of the lunar surface using artificial neural networks (ANNs). We demonstrate this powerful non-linear approach for prognosis of TiO2 abundance using Clementine UV-VIS mosaics and Lunar Soil Characterization Consortium data. The ANN technique allows one to study correlations between spectral characteristics of lunar soils and composition parameters without any restrictions on the character of these correlations. The advantage of this method in comparison with the traditional linear regression method and the Lucey et al. approaches is shown. The results obtained could be useful for the strategy of analyzing lunar data that will be acquired in incoming lunar missions especially in case of the Chandrayaan-1 and Lunar Reconnaissance Orbiter missions.  相似文献   

15.
《Planetary and Space Science》2007,55(11):1518-1529
Low-energy neutral atom (LENA) observations bring us important information on particle environments around celestial objects such as Mercury and the Moon. In this paper, we report on new development of an LENA instrument for planetary explorations. The instrument is light weight (2 kg), and capable of mass and energy discrimination with a large sensitivity. The performance of the instrument is investigated by numerical simulations. By using our new computer code, we calculated 3D particle trajectories including ionization, neutralization, surface scattering, and secondary electron creation. This enables us to obtain detailed performance characterization of LENA measurements. We also made trajectory tracing of photons entering the instrument to acquire photon rejection capability. This LENA instrument has been selected for both the Indian lunar exploration mission Chandrayaan-1 and European–Japanese Mercury exploration mission BepiColombo.  相似文献   

16.
The main goal of the gamma-ray spectrometer(GRS) onboard Chang'E1(CE-1) is to acquire global maps of elemental abundances and their distributions on the moon,since such maps will significantly improve our understanding of lunar formation and evolution.To derive the elemental maps and enable research on lunar formation and evolution,raw data that are received directly from the spacecraft must be converted into time series corrected gamma-ray spectra.The data correction procedures for the CE-1 GRS time series...  相似文献   

17.
A.E. Ringwood 《Icarus》1976,28(3):325-349
Recent hypotheses of lunar evolution hold that the Moon was extensively or completely melted and differentiated about 4.6 b.y. ago, resulting in formation of the plagioclase-rich lunar highlands underlain by a great thickness of complementary ferromagnesian cumulates. Mare basalts are interpreted as being formed by subsequent remelting of these cumulates. These hypotheses are tested experimentally in the cases of several bulk compositions which have been proposed for the Moon—those of Taylor and Jakes, Ganapathy and Anders, Wänke and co-workers, and Anderson. An extensive experimental investigation of melting equilibria displayed by the Taylor-Jakes model at high pressures and temperatures is presented. This permits a quantitative evaluation of the manner in which a model Moon with this composition would crystallize and differentiate under conditions of (i) total melting throughout, and (ii) total melting only of an outer shell a few hundred kilometers thick. A detailed study is made of the capacity of the cumulates underlying the crust in these models to produce mare basalts by a second stage of partial melting. A wide range of experimentally based arguments is presented, showing that for both cases, partial melting of such cumulates would produce magmas with compositions quite unlike those of mare basalts. In order to minimize these difficulties, bulk lunar compositions containing substantially smaller abundances of involatile components (e.g. CaO, Al2O3, TiO2) relative to major components of intermediate volatility (e.g. MgO, SiO2, FeO) than are specified in the Taylor-Jakes model, appear to be required. Other bulk lunar composition models proposed by Ganapathy and Anders, Wänke and co-workers and Anderson, were similarly tested in the light of experimental data. All of these are far too rich in (Ca and Al) relative to (Mg + Si + Fe) to yield, after melting and differentiation, cumulates capable of being parental to mare basalts. Moreover these compositions, whdn melted and differentiated, appear incapable of matching the composition of the pyroxene component of the lunar highland crust.A brief discussion of the petrogenesis of mare basakts is presented. The most promising model is one in which only the outer few hundred kilometers of the Moon were melted and differentiated around 4.6 b.y. ago. Continued radioactive heating of the deep undifferentiated lunar interior provided a second generation of primitive magmas up to 1.5 b.y. after the early melting and differentiation. These primitive magmas participated in assimilative interactions with late-stage differentiates formed near the crust-mantle boundary during the 4.6 b.y. differentiation. These interactions might explain some trace element and isotopic characteristics of mare basalts. The model possesses some attractive characteristics relating to the thermal evolution of the Moon.  相似文献   

18.
We conducted spectral analysis of central region of the Mare Moscoviense area on the far side of the Moon using the Hyperspectral Imager (HySI) data from the Chandrayaan-1 mission in an effort to identify and map the major lithological units present in the area. Various spectral band parameters, namely, band curvature, band tilt and band strength have been used for lithological discrimination based on the nature of the spectral profile. These band parameters essentially measure the shape, position and strength of the absorption feature near 1000 nm arising due to electronic transition of Fe2+ in crystallographic sites of major rock forming silicates. Spectral band parameters have been used for generating rock type composite image. Based on spectral studies and rock type composite image as obtained using band parameters, five major compositional units have been identified: highland basin soils, ancient mature mare, highland contaminated mare, buried unit with abundant low-Ca pyroxene (LCP), and youngest mare unit. In the present study, a multispectral approach in the form of spectral band parameters has been adopted for analysing the HySI hyperspectral data from Chandrayaan-1 mission. Present study clearly shows that the spectral band parameters obtained using selected HySI channels could efficiently be used to discriminate and delineate the major litho-units present across the central part of Mare Moscoviense and the same approach can thus be used for lithological mapping of other parts of lunar surface using HySI data.  相似文献   

19.
Abstract— The lunar surface is marked by at least 43 large and ancient impact basins, each of which ejected a large amount of material that modified the areas surrounding each basin. We present an analysis of the effects of basin formation on the entire lunar surface using a previously defined basin ejecta model. Our modeling includes several simplifying assumptions in order to quantify two aspects of basin formation across the entire lunar surface: 1) the cumulative amount of material distributed across the surface, and 2) the depth to which that basin material created a well‐mixed megaregolith. We find that the asymmetric distribution of large basins across the Moon creates a considerable nearside‐farside dichotomy in both the cumulative amount of basin ejecta and the depth of the megaregolith. Basins significantly modified a large portion of the nearside while the farside experienced relatively small degrees of basin modification following the formation of the large South Pole‐Aitken basin. The regions of the Moon with differing degrees of modification by basins correspond to regions thought to contain geochemical signatures remnant of early lunar crustal processes, indicating that the degree of basin modification of the surface directly influenced the distribution of the geochemical terranes observed today. Additionally, the modification of the lunar surface by basins suggests that the provenance of lunar highland samples currently in research collections is not representative of the entire lunar crust. Identifying locations on the lunar surface with unique modification histories will aid in selecting locations for future sample collection.  相似文献   

20.
A human return to the Moon will require that astronauts are well equipped with instrumentation to aid their investigations during geological field work. Two instruments are described in detail. The first is a portable X-ray Spectrometer, which can provide rapid geochemical analyses of rocks and soils, identify lunar resources and aid selection of samples for return to Earth. The second instrument is the Geological and Radiation environment package (GEORAD). This is an instrument package, mounted on a rover, to perform in-situ measurements on the lunar surface. It can be used for bulk geochemical measurements of rocks and soils (particularly identifying KREEP-enriched rocks), prospect for ice in shadowed areas of craters at the poles and characterise the lunar radiation environment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号