首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The comment of Green et al. debates the interpretation of the temperature of the H2O-saturated peridotite solidus and presence of silicate melt in the experiments of Till et al. (Contrib Mineral Petrol 163:669–688, 2012) at <1,000?°C. The criticisms presented in their comment do not invalidate any of the most compelling observations of Till et al. (Contrib Mineral Petrol 163:669–688, 2012) as discussed in the following response, including the changing minor element and Mg# composition of the solid phases with increasing temperature in our experiments with 14.5?wt% H2O at 3.2?GPa, as well as the results of our chlorite peridotite melting experiments with 0.7?wt% H2O. The point remains that Till et al. (Contrib Mineral Petrol 163:669–688, 2012) present data that call into question the H2O-saturated peridotite solidus temperature preferred by Green (Tectonophysics 13(1–4):47–71, 1972; Earth Planet Sci Lett 19(1):37–53, 1973; Can Miner 14:255–268, 1976); Millhollen et al. (J Geol 82(5):575–587, 1974); Mengel and Green (Stability of amphibole and phlogopite in metasomatized peridotite under water-saturated and water-undersaturated conditions, Geological Society of Australia Special Publication, Blackwell, pp 571-581, 1989); Wallace and Green (Mineral Petrol 44:1–19, 1991) and Green et al. (Nature 467(7314):448–451, 2010).  相似文献   

2.
In this paper, we study solving iteratively the coupling of flow and mechanics. We demonstrate the stability and convergence of two widely used schemes: the undrained split method and the fixed stress split method. To our knowledge, this is the first time that such results have been rigorously obtained and published in the scientific literature. In addition, we propose a new stress split method, with faster convergence rate than known schemes. These results are specially important today due to the interest in hydraulic fracturing (Dean and Schmidt SPE J. 14:707–714, 2009; Ji et al. SPE J. 14:423–430, 2009; Samier and De Gennaro 2007; Settari and Maurits SPE J. 3:219–226, 1998), in oil and gas shale reservoirs.  相似文献   

3.
A total of 163 free-field acceleration time histories recorded at epicentral distances of up to 200 km from 32 earthquakes with moment magnitudes ranging from M w 4.9 to 7.4 have been used to investigate the predictive capabilities of the local, regional, and next generation attenuation (NGA) ground-motion prediction equations and determine their applicability for northern Iran. Two different statistical approaches, namely the likelihood method (LH) of Scherbaum et al. (Bull Seismol Soc Am 94:341–348, 2004) and the average log-likelihood method (LLH) of Scherbaum et al. (Bull Seismol Soc Am 99:3234–3247, 2009), have been applied for evaluation of these models. The best-fitting models (considering both the LH and LLH results) over the entire frequency range of interest are those of Ghasemi et al. (Seismol 13:499–515, 2009a) and Soghrat et al. (Geophys J Int 188:645–679, 2012) among the local models, Abrahamson and Silva (Earthq Spectra 24:67–97, 2008) and Chiou and Youngs (Earthq Spectra 24:173–215, 2008) among the NGA models, and finally Akkar and Bommer (Seism Res Lett 81:195–206, 2010) among the regional models.  相似文献   

4.
Jakobsson (Contrib Miner Petrol 164(3):397–407, 2012) investigated a double capsule assembly for use in piston-cylinder experiments that would allow hydrous, high-temperature, and high-pressure experiments to be conducted under controlled oxygen fugacity conditions. Using a platinum outer capsule containing a metal oxide oxygen buffer (Ni–NiO or Co–CoO) and H2O, with an inner gold–palladium capsule containing hydrous melt, this study was able to compare the oxygen fugacity imposed by the outer capsule oxygen buffer with an oxygen fugacity estimated by the AuPdFe ternary system calibrated by Barr and Grove (Contrib Miner Petrol 160(5):631–643, 2010). H2O loss or gain, as well as iron loss to the capsule walls and carbon contamination, is often observed in piston-cylinder experiments and often go unexplained. Only a few have attempted to actually quantify various aspects of these changes (Brooker et al. in Am Miner 83(9–10):985–994, 1998; Truckenbrodt and Johannes in Am Miner 84:1333–1335, 1999). It was one of the goals of Jakobsson (Contrib Miner Petrol 164(3):397–407, 2012) to address these issues by using and testing the AuPdFe solution model of Barr and Grove (Contrib Miner Petrol 160(5):631–643, 2010), as well as to constrain the oxygen fugacity of the inner capsule. The oxygen fugacities of the analyzed melts were assumed to be equal to those of the solid Ni–NiO and Co–CoO buffers, which is incorrect since the melts are all undersaturated in H2O and the oxygen fugacities should therefore be lower than that of the buffer by 2 log $a_{{{\text{H}}_{ 2} {\text{O}}}}$ .  相似文献   

5.
The renewed interest in chromite ore deposits is directly related to the increase in Cr price ruled by international market trends. Chromite, an accessory mineral in peridotites, is considered to be a petrogenetic indicator because its composition reflects the degree of partial melting that the mantle experienced while producing the chromium spinel-bearing rock (Burkhard in Geochim Cosmochim Acta 57:1297–1306, 1993). However, the understanding of chromite alteration and metamorphic modification is still controversial (e.g. Evans and Frost in Geochim Cosmochim Acta 39:959–972, 1975; Burkhard in Geochim Cosmochim Acta 57:1297–1306, 1993; Oze et al. in Am J Sci 304:67–101, 2004). Metamorphic alteration leads to major changes in chromite chemistry and to the growth of secondary phases such as ferritchromite and chlorite. In this study, we investigate the Vourinos complex chromitites (from the mines of Rizo, Aetoraches, Xerolivado and Potamia) with respect to textural and chemical analyses in order to highlight the most important trend of alteration related to chromite transformation. The present study has been partially funded by the Aliakmon project in collaboration between the Public Power Corporation of Greece and Institute of Geology and Mineral Exploration of Kozani.  相似文献   

6.
A systematic investigation of the applicability of several ground motion prediction models for Vrancea intermediate-depth seismic source is conducted in this research. Two ground motion prediction models recommended by previous evaluations (Vacareanu et al. in Bull Earthq Eng 11(6):1867–1884, 2013a; Pavel et al. in Earthq Struct 6(1):1–18, 2014), as well as two new state-of-the-art ground motion prediction equations (Vacareanu et al. in J Earthq Eng, 2013b; Earthq Struct 6(2):141–161, 2014) are tested using an increased strong ground motion database consisting of 150 recordings from Vrancea subcrustal earthquakes. The evaluation is performed by using several goodness-of-fit parameters from the literature. Moreover, the applicability of the single-station sigma method is also investigated by using the same strong ground motion database recorded in 30 seismic stations from southern and eastern Romania. The influence of the soil conditions on the numerical results obtained in this study is investigated and discussed using the results provided by the analysis of variance method. The impact of the single-station standard deviation on the levels of seismic hazard is also assessed in this study, and the results show, in the analyzed cases, significant reductions of the hazard levels.  相似文献   

7.
Despite a missing definition of equivalence of mathematical models or methods by Zhang et al. (Math Geosci, 2013), an “equivalence” (Zhang et al., Math Geosci, 2013, p. 6,7,8,14) of modified weights-of-evidence (Agterberg, Nat Resour Res 20:95–101, 2011) and logistic regression does not generally exist. Its alleged proof is based on a previously conjectured linear relationship between weights of evidence and logistic regression parameters (Deng, Nat Resour Res 18:249–258, 2009), which does not generally exist either (Schaeben and van den Boogaart, Nat Resour Res 20:401–406, 2011). In fact, an extremely simple linear relationship exists only if the predictor variables are conditionally independent given the target variable, in which case the contrasts, i.e., the differences of the weights, are equal to the logistic regression parameters. Thus, weights-of-evidence is the special case of logistic regression if the predictor variables are binary and conditionally independent given the target variable.  相似文献   

8.
We discuss the convergence of the upstream phase-by-phase scheme (or upstream mobility scheme) towards the vanishing capillarity solution for immiscible incompressible two-phase flows in porous media made of several rock types. Troubles in the convergence were recently pointed out by Mishra and Jaffré (Comput. Geosci. 14, 105–124, 2010) and Tveit and Aavatsmark (Comput. Geosci. 16, 809–825, 2012). In this paper, we clarify the notion of vanishing capillarity solution, stressing the fact that the physically relevant notion of solution differs from the one inferred from the results of Kaasschieter (Comput. Geosci. 3, 23–48, 1999). In particular, we point out that the vanishing capillarity solution depends on the formally neglected capillary pressure curves, as it was recently proven in by Andreianov and Cancès (Comput. Geosci. 17, 551–572, 2013). Then, we propose a numerical procedure based on the hybridization of the interfaces that converges towards the vanishing capillarity solution. Numerical illustrations are provided.  相似文献   

9.
The earthquake resistant design of structures depends upon the soil-structure interaction during seismic excitation. The dynamic behavior of surface foundations and deep foundations has been investigated by several authors (Gazetas in Soil Dyn Earthq Eng 2(1):2–42, 1983; Pecker in Dynamique des sols. Presses de l’Ecole Nationale des Ponts et Chaussées, Paris, 1984; Sieffert and Cevaer in Manuel des fonctions d’impédance. Ouest-Editions, Nantes, 1992, etc.) but the dynamic behavior of pile-reinforced soils has not been sufficiently studied yet. The design of pile-reinforced soils comprises the design of the rigid piles and the design of the earth-platform. The foundation system studied in this article consists of an earth-platform over a soft ground reinforced by deep piles. In order to understand the dynamic behavior of a rigid pile, a series of dynamic tests is conducted on an experimental site. The vertical and horizontal impedances of the slab foundation are obtained with and without rigid piles. The numerical models are developed to interpret these dynamic tests. The numerical and experimental impedance functions are compared in both the vertical and the horizontal directions. A sensitivity analysis on the influence of the physical and geometrical properties of rigid piles on the impedance functions is presented.  相似文献   

10.
D. K. Yoon 《Natural Hazards》2012,63(2):823-843
The purpose of this study is to examine and compare the methodologies being developed in assessing social vulnerability to natural disasters. Existing vulnerability literature shows that two methods have been used in developing social vulnerability indexes: (1) a deductive approach based on a theoretical understanding of relationships and (2) an inductive approach based on statistical relationships (Adger et al. in New indicators of vulnerability and adaptive capacity. Tyndall Centre for Climate Change Research, Norwich, 2004). Two techniques were also utilized in aggregating social vulnerability indicators: (1) a deductive approach using standardization techniques such as z scores or linear scaling (Wu et al. in Clim Res 22:255?C270, 2002; Chakraborty et al. in Nat Hazards Rev 6(1):23?C33, 2005) and (2) an inductive approach using data-reduction techniques such as factor analysis (Clark et al. in Mitig Adapt Strateg Glob Change 3(1):59?C82, 1998; Cutter et al. Soc Sci Quart 84(2):242?C261, 2003). This study empirically compares deductive and inductive index development and indicator aggregation methods in assessing social vulnerability to natural disasters in the Gulf of Mexico and Atlantic coastal areas. The aggregated social vulnerability index is used to examine a relationship with disaster losses in the Gulf of Mexico and Atlantic coastal areas. The results show that coastal counties with more vulnerability in terms of social achieved status are positively associated with disaster damages, while variations in the development of the index using deductive and inductive measurement approaches produce different outcomes.  相似文献   

11.
A method is described for estimating the activity of titania (TiO2) in a magmatic liquid from the compositions of coexisting cubic oxide (spinel) and rhombohedral oxide (ilmenite). These estimates are derived from the thermodynamic models of Ghiorso and Evans (Am J Sci 308:957–1039, 2008; see also Sack and Ghiorso in Contrib Mineral Petrol 106:474–505, 1991a; Am Mineral 76:827-847, 1991b) and may be computed self consistently along with temperature and oxygen fugacity for an assumed pressure. The method is applied to a collection of 729 naturally occurring oxide pairs from rhyolites and dacites. For this suite of oxides, values of titania activity relative to rutile saturation range from 0.3 to 0.9. Genetically related groups of oxide pairs display activity–temperature trends with negative slopes at higher activities (0.6–0.9) or positive slopes at lower activities (0.3–0.7). Thermodynamic analysis supports the assumption of two-oxide, liquid equilibrium for the former group, but suggests that such an interpretation for oxide sequences with positive activity–temperature trends may be problematic. Application of the estimation method to oxide pairs from the Shiveluch Volcano and the Bishop Tuff reveals that the former are consistent with having equilibrated with known matrix glass compositions, whereas the latter pairs are inconsistent with equilibration with pre-eruptive liquids trapped in quartz inclusions.  相似文献   

12.
Phenocryst assemblages of lavas from the long-lived Aucanquilcha Volcanic Cluster (AVC) have been probed to assess pressure and temperature conditions of pre-eruptive arc magmas. Andesite to dacite lavas of the AVC erupted throughout an 11-million-year, arc magmatic cycle in the central Andes in northern Chile. Phases targeted for thermobarometry include amphibole, plagioclase, pyroxenes, and Fe–Ti oxides. Overall, crystallization is documented over 1–7.5 kbar (~25 km) of pressure and ~680–1,110 °C of temperature. Pressure estimates range from ~1 to 5 kbar for amphiboles and from ~3 to 7.5 kbar for pyroxenes. Pyroxene temperatures are tightly clustered from ~1,000–1,100 °C, Fe–Ti oxide temperatures range from ~750–1,000 °C, and amphibole temperatures range from ~780–1,050 °C. Although slightly higher, these temperatures correspond well with previously published zircon temperatures ranging from ~670–900 °C. Two different Fe–Ti oxide thermometers (Andersen and Lindsley 1985; Ghiorso and Evans 2008) are compared and agree well. We also compare amphibole and amphibole–plagioclase thermobarometers (Ridolfi et al. 2010; Holland and Blundy 1994; Anderson and Smith 1995), the solutions from which do not agree well. In samples where we employ multiple thermometers, pyroxene temperature estimates are always highest, zircon temperature estimates are lowest, and Fe–Ti oxide and amphibole temperature estimates fall in between. Maximum Fe–Ti oxide and zircon temperatures are observed during the middle stage of AVC activity (~5–3 Ma), a time associated with increased eruption rates. Amphibole temperatures during this time are relatively restricted (~850–1,000 °C). The crystal record presented here offers a time-transgressive view of an evolving, multi-tiered subvolcanic reservoir. Some crystals in AVC lavas are likely to be true phenocrysts, but the diversity of crystallization temperatures and pressures recorded by phases in individual AVC lavas suggests erupting magma extensively reams and accumulates crystals from disparate levels of the middle to upper crust.  相似文献   

13.
Melting experiments were conducted on a mica–clinopyroxenite xenolith brought up in a minette dyke in southern Alberta, Canada, near Milk River. Both the minettes and mica–clinopyroxenite xenoliths were studied by Buhlmann et al. (Can J Earth Sci 37:1629–1650, 2000), who hypothesized that the minettes formed by partial melting of a mantle source containing clinopyroxene + phlogopite ± olivine, at pressures ≥1.7 GPa. In liquidus experiments performed on the most primitive minette in our previous study (Funk and Luth in Contrib Mineral Petrol 164:999–1009, 2012), we found a multiple saturation point where olivine and orthopyroxene coexisted with liquid at 1.77 GPa and 1,350 °C. We argued that the minette originally formed by partial melting of clinopyroxene + phlogopite, but had re-equilibrated with a harzburgite during ascent. In the current study, we wanted to test both the source region hypothesis of Buhlmann et al. and our re-equilibration hypothesis by studying the near-solidus phase equilibria of a mica + clinopyroxene assemblage. We found the solidus for our xenolith has a steep slope in P–T space and lies at temperatures above those of a normal cratonic geotherm, implying that this mica–clinopyroxenite is stable in the cratonic mantle. Melting could occur at greater depths, where the solidus is extrapolated to cross the geotherm or must be induced either by raising the temperatures of the surrounding rocks or by introducing hydrous fluids into the source. Our melts are in equilibrium with clinopyroxene and olivine. The compositions of the liquids derived from melting this xenolith are similar to madupitic lamproites from the Leucite Hills, Wyoming, studied by Carmichael (Contrib Mineral Petrol 15:24–66, 1967) and Barton and Hamilton (Contrib Mineral Petrol 66:41–49, 1978; Contrib Mineral Petrol 69:133–142, 1979). Barton and Hamilton (Contrib Mineral Petrol 69:133–142, 1979) proposed that the madupitic lamproites may have come from a source containing mica and pyroxene. This study supports their hypothesis. The composition of the most primitive minette from southern Alberta lies between our experimental melt and a population of representative mantle orthopyroxenes. We conclude from our study that the Milk River minettes were likely derived from a source containing phlogopite, clinopyroxene and trace amounts of apatite, which formed olivine upon melting. During ascent, the melts changed composition by reacting with orthopyroxene.  相似文献   

14.
The liquefaction potential of saturated cohesionless deposits in Guwahati city, Assam, was evaluated. The critical cyclic stress ratio required to cause liquefaction and the cyclic stress ratio induced by an earthquake were obtained using the simplified empirical method developed by Seed and Idriss (J soil Mech Found Eng ASCE 97(SM9):1249–1273, 1971, Ground motions and soil liquefaction during earthquakes. Earthquake Engineering Research Institute, Berkeley, CA, 1982) and Seed et al. (J Geotech Eng ASCE 109(3):458–483, 1983, J Geotech Eng ASCE 111(12):1425–1445, 1985) and the Idriss and Boulanger (2004) method. Critical cyclic stress ratio was based on the empirical relationship between standard penetration resistance and cyclic stress ratio. The liquefaction potential was evaluated by determining factor of safety against liquefaction with depth for areas in the city. A soil database from 200 boreholes covering an area of 262 km2 was used for the purpose. A design peak ground acceleration of 0.36 g was used since Guwahati falls in zone V according to the seismic zoning map of India. The results show that 48 sites in Guwahati are vulnerable to liquefaction according to the Seed and Idriss method and 49 sites are vulnerable to liquefaction according to the Idriss and Boulanger method. Results are presented as maps showing zones of levels of risk of liquefaction.  相似文献   

15.
  相似文献   

16.
We propose a two-dimensional computational model for deep landslides triggered by rainfall, based on interacting particles or grains. The model describes a vertical section of a fictitious granular material along a slope, in order to study the behavior of a wide-thickness landslide. The triggering of the landslide is caused by the exceeding of two conditions: a threshold speed and a condition on the static friction of the particles, the latter based on the Mohr–Coulomb failure criterion (Coulomb in Mem Acad R Div Sav 7:343–387, 1776; Mohr in Abhandlungen aus dem Gebiete der Technischen Mechanik. Ernst, Berlin, 1914). The interparticle interactions are represented as a potential that, in the absence of suitable experimental data and due to the arbitrariness of the grain dimension, is modeled similarly to the Lennard-Jones’ one (Lennard-Jones in Proc R Soc Lond A 106(738):463–477, 1924), i.e., with an attractive and a repulsive part. For the updating of the particle positions, we use a molecular dynamics method, which is quite suitable for this type of systems (Herrmann and Luding in Continuum Mech Thermodyn 10:189–231, 1998). An infiltration scheme is introduced for modeling the increasing pore pressure due to the rainfall. Finally, we also introduce the viscosity in the dynamical equations of motion. The statistical characterization and dynamical behavior of the results of simulations are quite satisfactory relative to real landslides: We obtain a power law distribution of landslide triggering times, and the velocity patterns are typical of real cases, including the acceleration progression. Therefore, we can claim that this type of modeling can represent a new method to simulate landslides triggered by rainfall.  相似文献   

17.
Three-dimensional, elastic and elasto-plastic finite element (FE) programs have permitted calculation of the displacements and the factor of safety (FOS) for the excavation for a tower, 132.70 m high (above foundation) on the island of Tenerife. The tower is supported by a 2 m thick reinforced concrete slab on jointed, vesicular and weathered basalt and scoria. The installation of rod extensometers at different depths below the slab has permitted comparison between measured and calculated displacements and the estimation of in situ deformation modulus. The moduli deduced from the simple empirical equations proposed by Hoek et al. (In: NARMS-TAC, 2002) and Gokceoglu et al. (Int J Rock Mech Min Sci 40:701–710, 2003) as a function of GSI, and Nicholson and Bieniawski (Int J Min Geol Eng 8:181–202, 1990) as a function of RMR, provide an acceptable fit with the measured settlements in this type of rock. Good correlation is also obtained with the empirical equation presented by Verman et al. (Rock Mech Rock Eng 30(3):121–127, 1997) that incorporates the influence of confining stress in the deformation modulus. The FOS obtained from different correlations with geomechanical classifications is within a relatively narrow range. These results increase our confidence in the use of classification schemes to estimate the deformation and stability in jointed rock.  相似文献   

18.
Two major traces of active thrust faults were identified in the Kashmir Basin (KB) using satellite images and by mapping active geomorphic features. The ~N130°E strike of the mapped thrust faults is consistent with the regional ~NE–SW convergence along the Indian–Eurasian collision zone. The ~NE dipping thrust faults have uplifted the young alluvial fan surfaces at the SW side of the KB. This created a major tectono-geomorphic boundary along the entire strike length of the KB that is characterised by (1) a low relief with sediment-filled sluggish streams to the SE and (2) an uplifted region, with actively flowing streams to the SW. The overall tectono-geomorphic expression suggests that recent activity along these faults has tilted the entire Kashmir valley towards NE. Further, the Mw 7.6 earthquake, which struck Northern Pakistan and Kashmir on 8 October 2005, also suggests a similar strike and NE dipping fault plane, which could indicate that the KB fault is continuous over a distance of ~210 km and connects on the west with the Balakot Bagh fault. However, the geomorphic and the structural evidences of such a structure are not very apparent on the north-west, which thus suggest that it is not a contiguous structure with the Balakot Bagh fault. Therefore, it is more likely that the KB fault is an independent thrust, a possible ramp on the Main Himalayan Thrust, which has uplifting the SW portion of the KB and drowning everything to the NE (e.g. Madden et al. 2011). Furthermore, it seems very likely that the KB fault could be a right stepping segment of the Balakot Bagh fault, similar to Riasi Thrust, as proposed by Thakur et al. (2010). The earthquake magnitude is measured by estimating the fault rupture parameters (e.g. Wells and Coppersmith in Bull Seismol Soc Am 84:974–1002, 1994). Therefore, the total strike length of the mapped KB fault is ~120 km and by assuming a dip of 29° (Avouac et al. in Earth Planet Sci Lett 249:514–528, 2006) and a down-dip limit of 20 km, a Mw of 7.6 is possible on this fault.  相似文献   

19.
We believe the hypothesis presented by Maier et al. (Miner Deposita 48:1–56, 2012) for the formation of the various ore bodies in the Bushveld Complex to be overly simplistic, and we raise concerns that some of our work, used in support of this hypothesis, has been misrepresented. The formation of both diverse metalliferous layers (platinum-group element (PGE) reefs and Ti-magnetite layers) and some discordant (pipe) ore deposits has been ascribed by Maier et al. to the single unifying process of hydrodynamic sorting. The problem faced by authors of universal hypotheses for the Bushveld Complex is the sheer size and complexity of the intrusion. We disagree with many aspects of the overall Maier et al. model and have also identified several minor errors on maps and photographs, although some of these do not have a material effect on the model. The nature and origin of the layering is, however, too complex a topic to deal with in the context of this commentary, and we restrict ourselves to noting that our preferred hypothesis, namely the incremental buildup of layering from numerous episodes of replenishment, by different magma lineages, is consistent with field relationships. Our hypothesis for the origin of the ultramafic-hosted PGE-rich reefs, i.e., lateral mixing, is applicable to economically mineralized reefs (Mitchell and Scoon, Econ Geol 102:971–1009, 2007) and poorly mineralized layers such as the Pseudoreef harzburgite (Scoon and De Klerk, Canad Mineral 25:51–77, 1987) and the chromitite layers below the UG2 (Scoon and Teigler, Econ Geol 89:1094–1121, 1994).  相似文献   

20.
The key mineralogical features of the Newania carbonatites, that illustrate their derivation from primary mantle melts (Gruau et al. Terra Nova, Abstract Suppl 1:336, 1995; Viladkar Petrology 6(3):272–283, 1998; Basu and Murty Abstracts of Goldschmidt Conference A40, 2006), are the presence of magnesite, graphite and Cr-rich magnetite. Magnesite is an early crystallizing phase. Cr-rich magnetite and graphite coexist with carbonatite minerals and precipitated from carbonate magma. Graphite, as well as gaseous CO2 and carbonate minerals such as dolomite and magnesite, can be stable in peridotite mantle. Coexistence of these minerals is controlled by fO 2 and PT-conditions. Mineral geothermometers for the Newania carbonatite give temperatures from 463 to 950°C. The parental source for Newania carbonatites was characterized by a relatively high log (fHF/fH2O) level which increased during the crystallization history of Newania. The estimated oxygen fugacity (for ilmenite–magnetite pairs) varies from ?1.5 to +3.5 (log-bar unit deviation from FMQ buffer), which is supported by the presence of Fe-columbite, and the composition of phlogopite, amphibole and pyroxene that have an elevated concentration of Fe3+. However, the oxygen fugacity range represented by co-existing early-crystallized graphite and magnesite is below that of the FMQ buffer and lies on the CCO buffer.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号