首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 491 毫秒
1.
A high-resolution multichannel seismic reflection river profiling campaign was completed in July 2002 in the southern Upper Rhine graben (URG), along the River Rhine. Preliminary results show apparent Quaternary vertical slip rates, on intra-graben faults that are relatively slow, of the order of a few thousandths to a few hundredths of mm/yr. Moreover, kinematical data from the Ludwigshafen area show decreasing vertical slip rates since the Middle Pleistocene and/or a migration of tectonic activity. While still preliminary, these data show inhomogeneous and relatively slow tectonic activity in the URG that could probably not alone have shaped the Quaternary graben morphology. To cite this article: G. Bertrand et al., C. R. Geoscience 338 (2006).  相似文献   

2.
We determine the source parameters of three minor earthquakes in the Upper Rhine Graben (URG), a Cenozoic rift, using waveforms from permanent and temporary seismological stations. Two shallow thrust-faulting events (M L = 2.4 and 1.5) occurred on the rift shoulder just south of Heidelberg in March 2005. They indicate a possible movement along the sediment–crystalline interface due to tectonic loading from the near-by Odenwald. In February 2005, an earthquake with a normal-faulting mechanism occurred north of Speyer. This event (M L = 2.8) had an unusual depth of about 22 km and a similar deep normal-faulting event occurred there in 1972 (M L = 3.2). Other lower crustal events without fault plane solutions are known from 1981 and 1983. At such a depth, inside the lower crust, ductile behaviour instead of brittle faulting is commonly assumed and used for geodynamic modelling. Based on the newly available fault plane solutions we can confirm the brittle, extensional regime in the upper and lower crust in the central to northern URG indicated in earlier studies.  相似文献   

3.
A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.  相似文献   

4.
The Upper Rhine Graben (URG) is the most perceptible part of the European Cenozoic Rift System. Uplifted Variscan basement of the Black Forest and the Vosges forms the flanks of the southern part of the graben. Apatite and zircon fission-track (FT) analyses indicate a complex low-temperature thermal history of the basement that was deciphered by inverse modelling of FT parameters. The models were tested against the observed data and independent geological constraints. The zircon FT ages of 28 outcrop samples taken along an E–W trending transect across the Black Forest and the Vosges range from 136 to 312 Ma, the apatite FT ages from 20 to 83 Ma. The frequency distributions of confined track lengths are broad and often bimodal in shape indicating a complex thermal history. Cooling below 120°C in the Early Cretaceous to Palaeogene was followed by a discrete heating episode during the late Eocene and subsequent cooling to surface temperature. The modelled time–temperature (t–T) paths point to a total denudation of the flanks of URG in the range of 1.0–1.7 km for a paleogeothermal gradient of 60°C/km, and 1.3–2.2 km for a paleogeothermal gradient of 45°C/km since the late Eocene.  相似文献   

5.
ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅＴａｎｃｈｅｎｇ－Ｌｕｊｉａｎｇｆａｕｌｔｂｅｌｔｉｓｔｈｅｌａｒｇｅｓｔｓｔｒｉｋｅ－ｓｌｉｐｆａｕｌｔｂｅｌｔｉｎＥａｓｔＣｈｉｎａ．Ｔｈｉｓｆａｕｌｔｂｅｌｔｈａｓｕｎｄｅｒｇｏｎｅａｃｏｍ－ｐｌｉｃａｔｅｄｇｅｏ...  相似文献   

6.
This study of fluvial terraces of the River Rhine and tributaries aims to search for indications of Pleistocene tectonic activity. The study area includes the northern Upper Rhine Graben (URG), the Mainz Basin and the adjacent Rhenish Massif with the Middle Rhine Valley. High rates of Quaternary surface processes, large amount of human modifications, relatively slow tectonic deformation and presently low intra-plate seismic activity characterize this area. Therefore, the records of relatively slow tectonic deformation are less well preserved and thus difficult to detect. This study uses the relative position of fluvial terraces to determine the more local effects of fault movements on the terraces and to evaluate their displacement rates and patterns. The research is based on a review of previous terrace studies and new terrace mapping from the eastern Mainz Basin and the bordering URG using topographic map interpretations and field observations. This newly mapped sequence of terrace surfaces can be correlated to other terraces in the vicinity on the basis of relative height levels. Terrace correlation between the western Mainz Basin and Middle Rhine Valley relies on a single chronostratigraphic unit (Mosbach sands) and additional relative height correlations. This is the first study to present a continuous correlation of terraces from the western margin of the URG to the Rhenish Massif and enables the study of the transition from the subsiding graben to the uplifted Rhenish Massif. By means of a longitudinal profile, which ranges from the URG to the Rhenish Massif, the influence of individual fault movements on the terrace levels and the large-scale regional uplift is demonstrated. It is evident from the profile that the uplift of Early to Middle Pleistocene terraces increases northwards, towards the Rhenish Massif. The uplift was diachronic, with a significant pulse occurring first in the northern URG (Lower Pleistocene) and later in the Rhenish Massif (Middle Pleistocene). The largest vertical displacements are recorded for the boundary fault separating the Mainz Basin and the Rhenish Massif (Hunsrück–Taunus Boundary Fault) and for faults bounding the northeastern Mainz Basin. The motions and displacement rates calculated for individual faults indicate deformation rates in the order of 0.01–0.08 mm/year. At this stage, the calculation of displacement rates depends mostly on a single dated stratigraphic unit. Additional dating of terrace deposits is urgently needed to better constrain the temporal development of the terrace sequence and the impact of tectonic movements.  相似文献   

7.
A large-scale transfer zone subdivides the northern parts of the Upper Rhine Graben into a northern and a southern sub-basin. These sub-basins display the geometry of asymmetric half-grabens with opposing tilt directions. The transfer zone connects the western master fault of the northern half-graben with the eastern master fault of the southern half-graben. In the northern Upper Rhine Graben early syn-rift sedimentation (Late Priabonian to Late Rupelian) was controlled by the tectonically induced subsidence of these half-grabens (autogenetic), as well as by regional third-order sea level variations (allogenetic). Within the graben, lateral changes in subsidence rates (in dip and strike direction of fault blocks) controlled the development of accommodation space and thus, sediment thickness and facies. Furthermore, a low-displacement segment along the western border fault acted as a sediment entry point. Tectonics controlled the distribution of early syn-rift deposits and the palaeogeography of the northern Upper Rhine Graben.  相似文献   

8.
The southern end of the Upper Rhine Graben (URG) is formed by a major continental transfer zone, which was localised by the reactivation of ENE-oriented basement faults of Late Palaeozoic origin. A combination of subcrop data (derived from exploration wells and reflection seismic lines) and palaeostress analysis provided new constraints on the timing and kinematics of interacting basement faults. Rifting in the southern URG began in the Upper Priabonian under regional WNW–ESE-directed extension, oriented roughly perpendicular to the graben axis. In the study area, this led to the formation of NNE-trending half-grabens. Simultaneously, ENE-trending basement faults, situated in the area of the future Rhine-Bresse Transfer Zone (RBTZ), were reactivated in a sinistrally transtensive mode. In the sedimentary cover the strike-slip component was accommodated by the development of en-échelon aligned extensional flexures. Flexuring and interference between the differently oriented basement faults imposed additional, but locally confined extension in the sedimentary cover, which deviated by as much as 90° from the regional WNW–ESE extension. The interference of regional and local stresses led to a regime approaching radial extension at the intersection between the URG and RBTZ.  相似文献   

9.
In the northern part of the Upper Rhine Graben (URG), a high-resolution seismic reflection survey was carried out on the Rhine River over a length of 80 km, and on its tributary Neckar over a length of 25 km. The seismic investigation provides new results to redefine the base of Quaternary fluvial sediments from Oppenheim upstream to the south of Mannheim. The standard Quaternary thickness map of Bartz (1974) was partially revised and completed. Maximum Pleistocene sediment thickness is documented in the area of Mannheim with approximately 225 m. The top of the Pliocene in this area is sub-horizontal and not faulted, and rises downstream continuously towards the fault block of Worms. Intercalated lacustrine pelitic layers play a main role in defining the litho-stratigraphy in this part of the URG. In the north of Worms, Pleistocene sediments are mainly coarse-grained. In the area of Worms, a Pleistocene tectonic phase along N–S striking normal faults with variable displacement along the strike is obvious.  相似文献   

10.
Marine‐connected basins with evaporites occur beneath most extensional continental margins that originated at low‐latitudes and often are of major economic significance. Cyclicity in the evaporite lithofacies reflects the degree of restriction of the basin, overprinted by sea‐level changes, and caused by structural movements in the barrier region, whether by fault‐block rotation, footwall uplift or hanging wall subsidence, in both extensional and compressional basins. The Upper Triassic evaporites of the Ramon section in southern Israel model cyclic sedimentation in such environments. The Mohilla Formation is a carbonate–evaporate–siliciclastic succession of Carnian age that fills a chain of basins extending along the Levant margin from southern Israel to Jordan and Syria. The basins developed in half‐grabens adjacent to normal faults that formed during a period of regional extension. Evaporites of this formation are well‐exposed in outcrops at Makhtesh Ramon, the southernmost of these basins. The M2 Member of the Mohilla Formation is composed of 42 sub‐metre cycles of alternating dolostone, gypsum and calcareous shales. Field and microfacies analysis showed these cycles to conform mostly to restricted shallow and marginal marine environments, spatially limited by the uplifted shoulders of the half‐graben systems. A total of 10 facies types belonging to six depositional environments have been identified. From stacking patterns and analysis of bed to bed change, cycles can be categorized into three groupings: (i) low frequency exposure to exposure cycles that developed under eustatic or climate control; (ii) high frequency deepening/shallowing‐upward cycles, characterized by gradual transitions due to short‐term sea‐level or runoff‐event oscillations possibly referable to orbital forcing; and (iii) high frequency shallowing‐upward cycles, characterized by abrupt transitions, attributable to sporadic tectonic events affecting accommodation space or barrier effectiveness. The way facies and cycling of the sedimentary environments was deciphered in the Mohilla evaporite basin can be used to unravel the genesis of many other evaporite basins with barriers of tectonic origin.  相似文献   

11.
We present a general stratigraphic synthesis for the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene times. The stratigraphic data were compiled both from literature and from research carried out by the authors during the past 6 years ; an index of the stratigraphically most important localitites is provided. We distinguish 14 geographical areas from the Helvetic domain in the South to the Hanau Basin in the North. For each geographical area, we give a synthesis of the biostratigraphy, lithofacies, and chronostratigraphic ranges. The relationships between this stratigraphic record and the global sea-level changes are generally disturbed by the geodynamic (e.g., subsidence) evolution of the basins. However, global sea-level changes probably affected the dynamic of transgression–regression in the URG (e.g., Middle Pechelbronn Beds and Serie Grise corresponding with sea-level rise between Ru1/Ru2 and Ru2/Ru3 sequences, respectively) as well as in the Molasse basin (regression of the UMM corresponding with the sea-level drop at the Ch1 sequence). The URGENT-project (Upper Rhine Graben evolution and neotectonics) provided an unique opportunity to carry out and present this synthesis. Discussions with scientists addressing sedimentology, tectonics, geophysics and geochemistry permitted the comparison of the sedimentary history and stratigraphy of the basin with processes controlling its geodynamic evolution. Data presented here back up the palaeogeographic reconstructions presented in a companion paper by the same authors (see Berger et al. in Int J Earth Sci 2005).  相似文献   

12.
This paper addresses the problem of volume restoration for 3-D sedimentary basin kinematic deformation. The primary purpose is methodological and concerns the use of contact mechanics with the finite element method, in order to deform a geological multi-bloc domain. This approach is applied to backward model the later stage of rifting of a segment of the southern Upper Rhine Graben (France–Germany border). Preliminary results from our modeling demonstrate the ability of the method not only to handle complex geometries, but also to successfully perform retro-deformation of a complex geological domain. In addition, they provide or confirm crucial information on the rifting evolution and tectonic features of this segment of the Upper Rhine Graben, such as the distribution of deformation, the asymmetry of the graben and a significant left-lateral strike-slip component of displacement.  相似文献   

13.
利用录井及地震反射资料,采用层序地层学原理对蒙古塔木察格盆地塔南凹陷下白垩统地层层序进行了划分和对比,划分出了4个三级层序（SQ1-SQ4）。在此基础上,结合盆地的构造演化特点,研究了层序结构特征,划分了层序类型,其中,SQ1和SQ2为初始裂谷期湖泊层序,SQ3为裂谷深陷期层序,SQ4为裂谷后过渡层序。层序的结构主要受构造沉降方式控制,塔南凹陷不同时期构造沉降方式不同,形成了3种层序发育模式,即简单箕状斜坡模式、差异沉降构造反转模式、坳陷型层序发育模式,不同的层序发育模式,其地层岩性圈闭的发育和分布不同。  相似文献   

14.
Twenty paleogeographic maps are presented for Middle Eocene (Lutetian) to Late Pliocene times according to the stratigraphical data given in the companion paper by Berger et al. this volume. Following a first lacustrine-continental sedimentation during the Middle Eocene, two and locally three Rupelian transgressive events were identified with the first corresponding with the Early Rupelian Middle Pechelbronn beds and the second and third with the Late Rupelian Serie Grise (Fischschiefer and equivalents). During the Early Rupelian (Middle Pechelbronn beds), a connection between North Sea and URG is clearly demonstrated, but a general connection between North Sea, URG and Paratethys, via the Alpine sea, is proposed, but not proved, during the late Rupelian. Whereas in the southern URG, a major hiatus spans Early Aquitanian to Pliocene times, Early and Middle Miocene marine, brackish and freshwater facies occur in the northern URG and in the Molasse Basin (OMM, OSM); however, no marine connections between these basins could be demonstrated during this time. After the deposition of the molasse series, a very complex drainage pattern developed during the Late Miocene and Pliocene, with a clear connection to the Bresse Graben during the Piacenzian (Sundgau gravels). During the Late Miocene, Pliocene and Quaternary sedimentation persisted in the northern URG with hardly any interruptions. The present drainage pattern of the Rhine river (from Alpine area to the lower Rhine Embayment) was not established before the Early Pleistocene.  相似文献   

15.
The northern Upper Rhine Graben, situated in the central part of the European Cenozoic rift system, is currently characterized by low intra-plate seismicity. Historical earthquakes have not been large enough to produce surface rupturing. Moreover, the records of Quaternary surface processes and human modifications are presumably better preserved than the record of the relatively slow tectonic deformation.In order to gain information on the neotectonic activity and paleoseismicity in this setting, the geological and geomorphological records of fault movements along a segment of the Western Border Fault (WBF) were studied using an integration of techniques in paleoseismology, structural analysis and shallow geophysics. The WBF segment investigated follows a 20 km long linear scarp of unclear origin. A series of geophysical measurements were performed and the results suggested that near-surface deformation structures are present at the segments' southern end. Several trenches opened at this location revealed fault structures with consistent extensional style and a maximum vertical displacement of 0.5 m. In one trench, the deformation structures were dated between 19 and 8 ka. Assuming the deformation has been caused by an earthquake, a Mw 6.5 earthquake would be implied. Aseismic deformation would point to a fault creep rate ≥ 0.04 mm/yr.A reconstruction of the sequence of events at the trench site, from Middle Pleistocene to Present, demonstrates that the morphology at the base of the scarp is the result of interplay between tectonic activity and fluvial and erosional processes. At the regional scale, a mixed origin for the WBF scarp is proposed, combining the effects of fluvial dynamics, erosion, regional uplift and localized tectonic activity on the WBF.  相似文献   

16.
盆地演化与地球动力学旋回   总被引：7，自引：0，他引：7  
盆地演化受地球演化节律所制约，节律由多层次构成。地球动力学旋回主要有３个级序：（１）超级大陆旋回，主要由羽柱构造的地幔对流动力学所控制，产生超级大陆的裂解和拼合，形成全球性同步隆升与沉降的克拉通盆地；（２）地槽旋回或造山旋回，主要由板块构造的岩石圈运动学所控制，按威尔逊旋回进展，发育各类盆地和造山带，形成“区域性”穿时开合与“非对称”互补；（３）褶皱幕或裂陷幕，主要由地体构造与拆层作用几何学所控制，产生盆地内各种构造样式和沉积样式，形成地方性的穿时递进变形，发育幕式变形和幕式沉积作用等。  相似文献   

17.
The Connecticut Valley–Gaspé (CVG) trough represents a major, orogen-scale Silurian–Devonian basin of the Northern Appalachians. From Gaspé Peninsula to southern New England, the CVG trough has experienced a contrasting metamorphic and structural evolution during the Acadian orogeny. Along its strike, the CVG trough is characterized by increasing strain and polyphase structures, and by variations in the intensity of regional metamorphism and contrasting abundance of c. 390–370 Ma granitic intrusions. In southern Quebec and northern Vermont, a series of NW–SE transects across the CVG trough have been studied in order to better understand these along-strike variations. Detailed structural analyses, combined with phase equilibria modelling, Raman spectrometry, and muscovite 40Ar/39Ar dating highlight a progressive and incremental deformation involving south–north variation in the timing of metamorphism. Deformation evolves from a D1 crustal thickening event which originates in Vermont and progresses to southern Québec where it peaked at 0.6 GPa/380°C at c. 375 Ma. This was followed by a D2 event associated with continuous burial in Vermont from 378 to 355 Ma, which produced peak metamorphic conditions of 0.85 GPa/380°C and exhumation in Quebec from 368 to 360 Ma. The D3 compressional exhumation event also evolved from south to north from 345 to 335 Ma. D1 to D3 deformation events form part of a continuum with an along-strike propagation rate of ~50 km/Ma During D1, the burial depth varied by more than 15 km between southern Quebec and Vermont, and this can be attributed to the occurrence of a major crustal indenter, the Bronson Hill Arc massif, in the New England segment of the Acadian collision zone.  相似文献   

18.
The sedimentary pattern of the southern Gulf of Suez, Egypt, especially during the Cenozoic rift stage, was controlled mainly by tectonic activities (subsidence and uplift) and sea level change. The stratigraphic record of the southern Gulf of Suez can be divided into two megasequences: pre-rift and syn-rift. The pre-rift megasequence can be viewed as two distinctive depositional regimes, clastic rocks of continental to braided stream environment during Cambrian and open marine transgression extended from Upper Cretaceous till Eocene. The syn-rift deposits showed a distinctive contrast between the depocenter and peripheral basins. This difference can be shown clearly on the sedimentary sequence of Hilal and Shoab Ali oilfields. The syn-rift megasequence can be differentiated in relation to rift evolution into the following stages: initial rift stage with low subsidence rate, main rift stage with maximum subsidence rate, quiescence stage with the slowest subsidence rate throughout the rift evolution, evaporite stage with restriction conditions, and Pliocene–Recent stage with shallow marine condition.  相似文献   

19.
A 2-D gravity model, incorporating geophysical and geological data, is presented for a 110 km long transect across the northern Rhine Graben, coinciding with the 92 km long DEKORP 9-N seismic reflection profile. The Upper Rhine Graben is marked by a prominent NNE-striking negative anomaly of 30–40 mgal on Bouguer gravity maps of SW Germany. Surface geological contacts, borehole data and the seismic reflection profile provide boundary constraints during forward modelling.
Short-wavelength (5–10 km) gravity features can be correlated with geologic structures in the upper few km. At deeper levels, the model reflects the asymmetry visible in the seismic profile; a thicker, mostly transparent lower crust in the west and a thinner, reflective lower crust in the east. From west to east Moho depth changes from 31 to 26–28 km. The entire 40 mgal minimum can be accounted for by the 2–3 km of light sedimentary fdl in the graben, which masks the gravitational effects of the elevated Moho. The thickened lower crust in the west partly compensates for the mass deficit from the depressed Moho. A further compensating feature is a relatively low density contrast at the crust-mantle boundary of 0.25 g cm-3. The Variscan must displays heterogeneity along the profile which cuts at an angle across the strike of Variscan structures. The asymmetry of the integrated crustal model, both at the surface and at depth suggests an asymmetric mechanism of rift development.  相似文献   

20.
Examples of the geological and geomorphic framework of river valleys in the Tunka rift basin (Baikal rift system) and in the Irkutsk amphitheater (Siberian craton) have been used to show that horizontal and vertical motions of tectonic units in southern East Siberia are superposed with periodic movements. In the latter, the waves of slow uplift are attendant with erosional incision events, whereas during the subsidence cycles the incised valleys become filled with mainly alluvial sediments. The latest incision events in the area occurred in the past 70 kyr.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号