首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 267 毫秒
1.
Changes in surface roughness on carbonate fault scarps often reflect varying durations of subaerial weathering. On the Pleasant Valley fault in central Nevada, the documentation of a surface rupture in 1915, a long recurrence interval of faulting, slow weathering rate, and a relatively high (2–3 m) single-event displacement make the discrimination of the historical and penultimate slip patches unambiguous. Following from a 2018 study, we used a Schmidt hammer and terrestrial laser scanning (TLS) to further test whether these weathering patterns delineate exposed slip patches on a fault scarp. Results show that Schmidt hammer rebound value ranges (termed ΔR – the difference between minimum and maximum R-values in repeat impacts at a point), increase by ~8–10 points across the historical–penultimate event transition zone in two separate scarp transects. TLS-derived surface roughness also indicates a clear difference between the most recent and penultimate events. The average single-event displacement (SED) estimated using the Schmidt hammer and TLS is 2.85 m at two transect sites and is roughly equivalent to the visually estimated 3 m. While this fault is an ideal case where we know some of the slip history, the results demonstrate that these techniques show promise for discriminating slip patches on larger carbonate fault scarps with longer paleoearthquake histories, and could be used alongside 36Cl cosmogenic exposure-age dating to improve paleoseismic records on normal faults. © 2019 John Wiley & Sons, Ltd.  相似文献   

2.
The bedrock scarps are believed to have recorded the continuous information on displacement accumulation and sequence of large earthquakes. The occurrence timing of large earthquakes is believed to be correlated positively with the exposure duration of bedrock fault surfaces. Accordingly, cosmogenic nuclides concentration determined for the bedrock footwall can offer their times, ages, and slip over long time. In general, multiple sites of fault scarps along one or even more faults are selected to carry out cosmogenic nuclide dating in an attempt to derive the temporal and spatial pattern of fault activity. This may contribute to explore whether earthquake occurrence exhibits any regularity and predict the timing and magnitude of strong earthquakes in the near future. Cosmogenic nuclide 36 Cl dating is widely applied to fault scarp of limestone, and the height of fault scarp can reach as high as 15~20m. It is strongly suggested to make sure the bedrock scarp is exhumed by large earthquake events instead of geomorphic processes, based on field observation, and data acquired by terrestrial LiDAR and ground penetration radar (GPR). In addition, it is better for the fault surface to be straight and fresh with striations indicating recent fault movement. A series of bedrock samples are collected from the footwall in parallel to the direction of fault movement both above and below the colluvium, and each of them is~15cm long,~10cm wide, and~3cm thick. The concentrations of both cosmogenic nuclide 36 Cl and REE-Y determined from these samples vary with the heights in parallel to fault scarps. Accordingly, we identify the times of past large earthquakes, model the profile of 36 Cl concentration to seek the most realistic one, and determine the ages and slip of each earthquake event with the errors. In general, the errors for the numbers, ages, and slips of past earthquake events are ±1-2, no more than ±0.5-1.0ka, and ±0.25m, respectively.  相似文献   

3.
Schmidt hammer (SH) R‐values are reported for surface clasts from numerically dated Holocene and Pleistocene fluvial terraces in the South Island of New Zealand. The R‐values are combined with previously obtained weathering rind, radiocarbon, terrestrial cosmogenic nuclide and luminescence terrace ages to derive SH R‐value chronofunctions for greywacke clasts from four distinct locations. Our results show that different weathering rates affect the form of the SH R‐value versus Age curve, however a fundamental dependency between the two remains constant over timescales ranging from 102 to 105 years. Power law scaling constants suggest changes in clast weathering rates are primarily affected by climatic (precipitation and temperature) and sedimentologic variables (source terrane petrology). Age uncertainties of ~22% of the surface age suggest that Schmidt hammer exposure‐age dating (SHD) is a reliable calibrated‐age dating technique for fluvial terraces. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

4.
The Nojima fault on the northwestern coast of Awaji Island, south of Kobe, was reactivated during the January 17, 1995 Hyogoken-nanbu earthquake. This fault rupture was dominated by right-lateral offset (max. 1.7 m) along a high-angle reverse fault which has a maximum vertical displacement of 1.3 m on the southeastern side. We repeatedly measured seven profiles across the fault scarp in two areas (Hirabayashi to the northeast and Ogura to the southwest) for approximately 1 year following the earthquake. The original profile of the fault scarp was an overhanging scarp at Hirabayashi and Ogura, corresponding to the 70–80 ° dip of the fault plane. The fault scarp at Hirabayashi displaces Plio-Pleistocene siltstones of the Osaka Group and is overlain by a thin bed of unconsolidated gravel. The Ogura area is entirely underlain by the Osaka Group. Scarp degradation at Hirabayashi occurred by collapse of the gravel bed and proceeded more quickly than at Ogura, where fault scarp degradation proceeded mainly by exfoliation of the Osaka Group siltstones. The degradation occurred at a very fast rate until March at Hirabayashi, and until June or July at Ogura. Since then, the degradation has been very slow. Our data strongly indicate that the scarp profile was initially controlled mainly by the dip of the fault plane, and scarp degradation has been primarily controlled by lithological factors. The degradation of the Nojima earthquake fault scarp proceeded much more quickly than that of normal fault scarps in the western U.S.A., where many observations of the initial stages of scarp degradation have been carried out. The extremely rapid degradation of the Nojima fault scarp in weak late Neogene siltstones might, in combination with rapid cultural modification of the landscape, explain the paucity of geomorphic scarps along the numerous active faults in Japan. This observation may also have implications for tectonic geomorphology and paleoseismicity studies in other countries characterised by weak bedrock and moderate to high rainfall regimes.  相似文献   

5.
Application of Schmidt‐hammer exposure‐age dating (SHD) to landforms has substantially increased in recent years. The original mechanical Schmidt hammer records R‐(rebound) values. Although the newly introduced electronic Schmidt hammer (SilverSchmidt) facilitates greatly improved data processing, it measures surface hardness differently, recording Q‐(velocity) values that are not a priori interconvertible with R‐values. This study is the first to compare the performance of both instruments in the context of field‐based exposure‐age dating with a particular focus on the interconvertibility of R‐values and Q‐values. The study was conducted on glacially polished pyroxene‐granulite gneiss, Jotunheimen, southern Norway. Results indicate that mean Q‐values are consistently 8–10 units higher than mean R‐values over the range of values normally encountered in the application of SHD to glacial and periglacial landforms. A convenient conversion factor of ±10 units may, therefore, be appropriate for all but the softest rock types close to the technical resolution of the instruments. The electronic Schmidt hammer should therefore be regarded as a useful complement and potential replacement for the mechanical Schmidt hammer. Conversion of published R‐values data to Q‐values requires, however, careful control and documentation of instrument calibration. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

6.
Rapid, field‐based assessments of rock hardness are required in a broad range of geomorphological investigations where rock intact strength is important. Several different methods are now available for taking such measurements, in particular the Schmidt hammer, which has seen increasing use in geomorphology in recent decades. This is despite caution from within the engineering literature regarding choice of Schmidt hammer type, normalization of rebound (R‐) values, surface micro‐roughness, weathering degree and moisture content, and data reduction/analysis procedures. We present a pilot study of the use of an Acoustic Energy Meter (AEM), originally produced, tested and developed within the field of underground mining engineering as a rapid measure of rock surface hardness, and compare it with results from a mechanical N‐Type Schmidt hammer. We assess its capabilities across six lithological study sites in southeast Queensland, Australia, in the Greater Brisbane area. Each rock exposure has been recently exposed in the 20th/21st century. Using a ‘paired’ sampling approach, the AEM G‐value shows an inverse relationship with Schmidt hammer R‐value. While both devices show variability with lithology, the AEM G‐values show less scatter than the Schmidt hammer. We conclude that each device can contribute to useful rock hardness testing in geomorphological research, but the AEM requires further field testing in a range of environments, and in particular on older and naturally‐exposed rock surfaces. Future evaluations can extend this pilot study by focusing on sampling procedures, energy sources, and data reduction protocols, within the framework of a comparison study with other rock hardness testing apparatus. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

7.
This study presents rock strength variations at granite outcrops and in subsurface vertical profiles in the Jizerské hory Mountains, Czech Republic. Schmidt hammer rebound values in subsurface profiles change gradually from the bedrock surface downward. An exponential relation has been observed between the R‐values and depth in rock outcrops to a depth of around 4·5 m. The exponential nature of the curve indicates that rock hardness increases more rapidly with depth in the uppermost 1?m section of the rock profile. A detailed study of rebound values obtained from both intact and polished rock exposures reveal effects of surface grinding on results of the Schmidt hammer method. The range of data collected increases after grinding, allowing more precise discrimination of rock surfaces in respect of age and weathering. The Schmidt hammer method may be used effectively as a relative‐age dating tool for rock surfaces that originated during the Late Pleistocene. It is concluded that this time limitation can be significantly mitigated by surface grinding before measurement. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

8.
Physical modelling has been developed in order to simulate the effects of periglacial erosion processes on the degradation of slopes and scarps. Data from 41 experimental freeze–thaw cycles are presented. They attest to the efficiency of periglacial processes that control both erosion and changes in scarp morphology: (i) cryoexpulsion leads to an increase of scarp surface roughness and modifies significantly the internal structure of the active layer; (ii) combined effects of frost creep and gelifluction lead to slow and gradual downslope displacements of the active layer (0·3 cm/cycle); (iii) debris flows are associated with the most significant changes in scarp morphology and are responsible for the highest rate of scarp erosion; (iv) quantification of the erosion rate gives values close to 1 cm3 cm?2 for 41 freeze–thaw cycles. These experimental results are consistent with field data acquired along the La Hague fault scarp (Normandy, France) where an erosion rate of 4·6 ± 1 m3 m?2 per glacial stage has been computed from the volume of natural slope deposits stored during the Weichselian glacial stage. These results show that moist periglacial erosion processes could lead to an underestimation of Plio‐Quaternary deformation in the mid‐latitudes. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

9.
Erosion processes in bedrock‐floored rivers shape channel cross‐sectional geometry and the broader landscape. However, the influence of weathering on channel slope and geometry is not well understood. Weathering can produce variation in rock erodibility within channel cross‐sections. Recent numerical modeling results suggest that weathering may preferentially weaken rock on channel banks relative to the thalweg, strongly influencing channel form. Here, we present the first quantitative field study of differential weathering across channel cross‐sections. We hypothesize that average cross‐section erosion rate controls the magnitude of this contrast in weathering between the banks and the thalweg. Erosion rate, in turn, is moderated by the extent to which weathering processes increase bedrock erodibility. We test these hypotheses on tributaries to the Potomac River, Virginia, with inferred erosion rates from ~0.1 m/kyr to >0.8 m/kyr, with higher rates in knickpoints spawned by the migratory Great Falls knickzone. We selected nine channel cross‐sections on three tributaries spanning the full range of erosion rates, and at multiple flow heights we measured (1) rock compressive strength using a Schmidt hammer, (2) rock surface roughness using a contour gage combined with automated photograph analysis, and (3) crack density (crack length/area) at three cross‐sections on one channel. All cross‐sections showed significant (p < 0.01 for strength, p < 0.05 for roughness) increases in weathering by at least one metric with height above the thalweg. These results, assuming that the weathered state of rock is a proxy for erodibility, indicate that rock erodibility varies inversely with bedrock inundation frequency. Differences in weathering between the thalweg and the channel margins tend to decrease as inferred erosion rates increase, leading to variations in channel form related to the interplay of weathering and erosion rate. This observation is consistent with numerical modeling that predicts a strong influence of weathering‐related erodibility on channel morphology. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

10.
The Bolokonu-Aqikekuduke fault zone(Bo-A Fault)is the plate convergence boundary between the middle and the northern Tianshan. Bo-A Fault is an inherited right-lateral strike-slip active fault and obliquely cuts the Tianshan Mountains to the northwest. Accurately constrained fault activity and slip rate is crucial for understanding the tectonic deformation mechanism, strain rate distribution and regional seismic hazard. Based on the interpretation of satellite remote sensing images and topographic surveys, this paper divides the alluvial fans in the southeast of Jinghe River into four phases, Fan1, Fan2, Fan3 and Fan4 by geomorphological elevation, water density, depth of cut, etc. This paper interprets gullies and terrace scarps by high-resolution LiDAR topographic data. Right-laterally offset gullies, fault scarps and terrace scarps are distributed in Fan1, Fan2b and Fan3. We have identified a total of 30 right-laterally offset gullies and terrace scarps. Minimum right-lateral displacement is about 6m and the maximum right-lateral displacements are(414±10)m, (91±5)m and(39±1)m on Fan2b, Fan3a and Fan3b. The landform scarp dividing Fan2b and Fan3a is offset right-laterally by (212±11)m. Combining the work done by the predecessors in the northern foothills of the Tianshan Mountains with Guliya ice core climate curve, this paper concludes that the undercut age of alluvial fan are 56~64ka, 35~41ka, 10~14ka in the Tianshan Mountains. The slip rate of Bo-A Fault since the formation of the Fan2b, Fan3a and Fan3b of the alluvial-proluvial fan is 3.3~3.7mm/a, 2.2~2.6mm/a and 2.7~3.9mm/a. The right-lateral strike-slip rate since the late Pleistocene is obtained to be 3.1±0.3mm/a based on high-resolution LiDAR topographic data and Monte Carlo analysis.  相似文献   

11.
断层陡坎的形态可以保存有关断层带上地震活动等重要信息,陡坎上的坡折就是多次地震发生后陡坎演化留下的微地貌信息。以往研究选取的断层陡坎多为位于标准阶地面上的断层陡坎,而断层沿线地貌现象复杂,因此需要探索一种具有普适性的断层陡坎形态研究方法。本研究将常见的断层陡坎剖面按照形态划分为三种类型,以LiDAR技术获取的0.2m分辨率DEM数据为基础,选择了8个属于不同断层陡坎剖面类型的实验区,每个实验区采集不少于20条剖面,通过窗口检验确定研究区最佳数据获取移动窗口为7个像元并计算每条剖面的坡度值,通过坡度约束限定陡坎范围,进而识别坡折并获取坡折信息。对坡折信息进行概率密度统计,根据概率密度统计图中的峰值个数确定强震事件的次数。结果显示,陡坎形态研究结果与古地震探槽结果表现出较好的一致性,表明本文提出的陡坎形态研究方法可以适用于不同类型断层陡坎来确定强震事件次数。  相似文献   

12.
Seismic hazard is difficult to assess in regions of low strain rates. A major limitation often relates to the absence of large instrumentally recorded events precluding any comparison between seismological data and paleoseismic or morphotectonic informations. We take advantage of the 1904 Ms∼7.1 earthquake that struck the southern edge of stable Eurasia and investigate if morphotectonic and paleoseismic observations can provide a reliable estimate of the seismic potential of slow-slipping faults. We have conducted a paleoseismic study of the Krupnik normal fault thought to be responsible for the event. A section of the fault bearing remnants of a 2 m-high scarp has been selected at the base of triangular facets. The trenching site locates where the scarp cuts across colluviums washed from the bedrock facetted slopes. We excavated two neighbouring trenches, one across a well-preserved portion of the scarp, and one across a portion degraded by a landslide. The excavations reveal a set of coarse colluvial units faulted against bedrock and affected by secondary fissures. Faulting appears to have resulted from a single event with normal throw greater than 1.3 m that occurred before the emplacement of the landslide. Accelerator Mass Spectrometry (AMS) radiocarbon dates of charcoal samples are consistent with the interpretation that the Krupnik Fault slipped recently, most probably in 1904, after a long lasting (> 10 ka) period of quiescence. The morphotectonic and paleoseismic observations yield seismic moment estimates compatible with the instrumental magnitude of the event and indicate that destructive and infrequent earthquakes typify the regional seismic behaviour.  相似文献   

13.
Progressive geomorphic changes in the flight of fluvial terraces along the Rappahannock River, Virginia, provide a framework for analysing the effect of time on landforms. The oldest terrace is probably no younger than early Quaternary, and the youngest major fill terrace probably correlates with the high sea level of the last major interglacial. A uranium-series date of 187,000 yr has been obtained on coral from marine sediments related to this terrace. Indices of terrace preservation, especially drainage densities and area to perimeter ratios, show systematic changes with terrace age. Hence, these variables appear to satisfactorily indicate relative age, and could perhaps be used to estimate actual ages if suitably calibrated. The morphology of scarps formed by entrenchment of the fluvial terraces is more variable than analogous morphology of fault scarps and wave-cut bluffs. However, measurements of the fluvial scarps clearly indicate that for a given terrace age, higher scarps tend to have steeper slopes, and that for a given scarp height, older scarps tend to have gentler slopes. The terrace forms themselves are preserved for at least several million years. Depositional features such as bars and channels with l–3m of relief are preserved on terraces on the order of 105 yr old. Scarps related to the formation of terraces of this age are well preserved and have slopes of about 6–8 degrees where the scarp height is about 5 m. The preservation of fluvial landforms and scarps suggests that, if fault scarps comparable to these features were commonly formed by earthquakes in low relief areas of the eastern United States, many should be recognizable.  相似文献   

14.
The Guadalentín Depression, located in SE Spain (Murcia Region), is bounded by two of the main NE-SW master faults of the Eastern Betics Cordilleras: The Lorca-Alhama and the Palomares left-lateral strike-slip faults. Available earthquake data indicate that, in the last 600 years, some sectors of the Lorca-Alhama Fault and the entire sector of the Palomares Fault have not been associated with significant historical seismicity. However, they show a wide range of diagnostic features of earthquake surface displacements on late Pleistocene and Holocene alluvial and colluvial surfaces. Aside from the left-lateral offsets recorded along 045–050 ° master fault strands of the Lorca-Alhama Fault, major paleoseismic surface displacements show different kinematics in relation to the broad orientation of the fault strands: (1) vertical normal displacements along 010–020 ° trending faults mainly preserved as degraded fault scarps of 2.5-1.8 m high (Aljibejo site); and (2) vertical reverse displacements, with average offsets of 0.2 – 1 m, along 065–080 ° subsidiary faults. In this last group, the younger one (Carraclaca Baths site) remains as a fault scarp of 0.8 m height affecting a cascade tufa which was active until the Spanish Roman Period (2nd Century B.C. to 6th Century A.D.). In other cases, reverse offsets resulted in smaller displacements (0.26 m) of paleosols, but show a recurrent behaviour (La Escarihuela site). The strongest earthquakes recorded in the study area did not exceed more than Mb 4.5 or MSK Intensity VIII (historical) with no evidence of coseismic rupture. Therefore, the preliminary data presented here seem to indicate that the paleoseismic activity on both faults is capable of producing coseismic surface displacements, probably reaching magnitudes of at least 6.5. These data show that paleoseismic studies based on geomorphological analyses are a useful tool in the assessment of the relative degree of activity of apparently ‘aseismic’ fault traces.  相似文献   

15.
Since 1996 paleoseismological investigations have been used to develop the surface- rupturing history of the Bree fault scarp, the morphologically best-defined segment of the southwestern border fault of the Roer Valley graben in northeastern Belgium. The first studies determined that the escarpment is associated with a surface fault, and they exposed evidence for three surface displacements since about 40 ka BP. The most recent eventprobably occurred between 1000 and 1350 yr cal BP. Geophysical and trenching studies at a new site near the southeastern end of the fault scarp reconfirmed the coincidence of the frontal escarpment with a shallow normal fault, which displaces the Middle Pleistocene `Main Terrace' of the Maas River, as well as overlying coversands of Saalian to late Weichselian age. Different amounts of displacement shown by the two youngest coversand units indicate two discrete faulting events, but primary evidence for the coseismic nature of these events is sparse. Radiocarbon and optically stimulated luminescence dating constrainthe age of these events to the Holocene and between 14.0 ± 2.3 ka BP and 15.8 ± 2.9 ka BP, respectively. In addition, four older surface-rupturing events are inferred from the presence of four wedge-shaped units of reworked Main Terrace deposits that are interbedded with coversand units in the hanging wall of the trench and in shallow boreholes. These wedges are interpreted as colluvial wedges, produced by accelerated slope processes in response torejuvenation of the fault scarp, most probably in a periglacial environment. Luminescence dating indicates that five out of a total of six identified faulting events are younger than 136.6 ± 17.6 ka. The antepenultimate event was the largest faulting event, associated with a total fault displacement in excess of 1 m. Thus, the newly investigated trench site represents the longest and most complete record of surface rupturing recovered so far along the Bree fault scarp. This study also demonstrates the viability of the paleoseismological approach to identify past large earthquakes in areas of present-day moderate to low seismic activity.  相似文献   

16.
Characteristic badlands are incised into Plio‐Pleistocene clays in Basilicata, southern Italy, creating steep, scarp slopes with knife‐edge ridges (calanchi) and small dome‐shaped forms (biancane). Erosion pin data for the period 1997–2003 give mean annual erosion rates for dome‐shaped biancane in the range 9–19 mm a?1, while rates for the calanchi scarps are lower, at 7–10 mm a?1. The erosion pin data also show a non‐linear relationship with slope angle. Maximum erosion rates coincide with a slope angle of 35°, within an envelope defined by combining the theoretical effects of both rainsplash and surface weathering. Monitoring of surface changes and erosion rates for two 0·5 m2 cleared swathes on biancane forms reveals a complex relationship between weathering and erosion. Characteristic forms can develop from large blocks of intact clay bedrock over a time period of less than 30 a. The implications of the measured erosion rates for the landform association of mountain front/pediment/domed inselberg are explored. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

17.
Cryoplanation terraces are elevated bedrock features resembling giant staircases, with alternating steep scarps and shallow sloping treads. These landscape-scale features have long been associated with periglacial environments, but the processes involved in their formation remain vaguely specified and contentious. The two leading hypotheses for the formation of cryoplanation terraces are centered on: (1) geologic structure; and (2) nivation-driven scarp retreat. The nivation-formation hypothesis invokes scarp retreat under erosion processes associated with late-lying snowbanks. To test whether cryoplanation terraces develop through scarp retreat, six relative weathering indices (fracture counts, Cailleux roundness, Cailleux flatness, Krumbein sphericity, rebound, and weathering rind thickness) were measured across well-developed terraces in unglaciated eastern Beringia (central and western Alaska) at Mt Fairplay, Eagle Summit, and Skookum Pass. Statistically significant differences in relative weathering indices detected through chi-square and multiple-comparison procedures indicate that material is less weathered closer to scarps, i.e. that these areas were more recently exposed than those distant from the scarp. Based on these findings, a refined model of time-transgressive cryoplanation terrace development through nivation-driven scarp retreat is proposed. This new qualitative model addresses the removal of weathered material from terrace treads down side slopes through piping and gravity-driven mass-wasting processes. © 2019 John Wiley & Sons, Ltd.  相似文献   

18.
The ～900 km long Darling Scarp in Western Australia is one of the most prominent linear topographic features on Earth. Despite the presence of over‐steepened reaches in all westerly flowing streams crossing the scarp, and significant seismic activity within 100 km of the scarp, there is no historical seismicity and no reported evidence for Quaternary tectonic displacements on the underlying Darling Fault. Consequently, it is unclear whether the scarp is a rapidly evolving landform responding to recent tectonic and/or climatic forcing or a more slowly evolving landform. In order to quantify late Quaternary rates of erosion and scarp relief processes, we obtained measurements of the cosmic‐ray produced nuclide beryllium‐10 (10Be) from outcropping bedrock surfaces along the scarp summit and face, in valley floors, and at stream knickpoints. Erosion rates of bedrock outcrops along the scarp summit surface range from 0·5 to 4·0 m Myr?1. These are in the same range as erosion rates of 2·1 to 3·6 m Myr?1 on the scarp face and similar to river incision rates of 2·6 to 11·0 m Myr?1 from valley floor bedrock straths, indicating that the Darling Scarp is a slowly eroding ‘steady state’ landform, without any significant contemporary relief production over the last several 100 kyr and possibly several million years. Knickpoint retreat rates determined from 10Be concentrations at the bases of two knickpoints on small streams incised into the scarp are 36 and 46 m Myr?1. If these erosion rates were sustained over longer timescales, then associated knickpoints may have initiated in the mid‐Tertiary to early Neogene, consistent with early‐mid Tertiary marginal uplift. Ongoing maintenance of stream disequilibrium longitudinal profiles is consistent with slow, regional base level lowering associated with recently proposed continental‐scale tilting, as opposed to differential uplift along discrete faults. Cosmogenic 10Be analysis provides a useful tool for interpreting the palaeoseismic history of intraplate near‐fault landforms over 105 to 106 years. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

19.
Fault-related tectonic geomorphologic features are integrated expressions of multiple strong seismological events and long-term surface processes, including crucial information about strong earthquake behavior of a fault. It's of great significance to identify the strong seismic activity information from faulted landscapes, which include the date and sequence of the seismic activities, displacements, active fault features, for studying the seismic rupture process, predicting the future seismic recurrence behavior and evaluating the seismic hazard of the fault. However, due to the restriction of measuring techniques and the subsequent poor quality of the acquired data, it has been difficult to accurately extract such information from complex tectonic landforms to study active faults for a long time. Recently, "small Unmanned Aerial Vehicle(sUAV)" photogrammetric technique based on "Structure from Motion(SfM)" provides a cost-efficient and convenient access to high-resolution and high-accuracy "digital elevation models(DEMs)" of tectonic landforms. This paper selects the Tangjiapo area at the Haiyuan Fault to conduct data collection, in which the structural and geomorphic features are well preserved. Using a small quadrotor unmanned aerial vehicle(Inpire 2), we collect 1598 aerial photographs with a coverage area of 0.72km2. For calibrating the accuracy of the aerial data, we set 10 ground control points and use differential-GPS to obtain the spatial coordinates of these control points. We use model software Agisoft PhotoScan to process these digital pictures, obtaining high-resolution and high-accuracy DEM data with the geographic information, in which data resolution is 2.6cm/pix and the average density of point cloud is 89.3 point/m2. The data with these accuracy and resolution can fully show the real geomorphic features of the landform and meet the requirements for extracting specific structural geomorphic information on the surface. Through the detailed interpretation of the tectonic landforms, we identify a series of structures associated with the strike-slip fault and divide the alluvial fan into four stages, named s1, s2, s3, and s4, respectively.Wherein, the s1 is the latest phase of the alluvial fan, which is in the extension direction of the Haiyuan Fault and there isn't any surface fracture, indicating that the s1 was formed after the M8.5 Haiyuan earthquake in 1920. The rupture zone on the s2 fan is composed of varied kinds of faulting geomorphologic landforms, such as a series of en echelon tension-shear fractures trending 270°~285°, fault scarps and seismic ridges caused by the left-lateral motion of the seismic fault. In addition, a number of field ridges on the s2 fan were faulted by the 1920 Haiyuan M8.5 earthquake, recording the co-seismic displacements of the latest earthquake event. Relatively speaking, the surface rupture structure of the s3 fan is simple, mainly manifested as linear fault scarp with a trend of 270°~285°, which may indicate that multiple earthquakes have connected the different secondary fractures. And a small part of s4 fan is distributed in the southwest of the study area without fault crossing. Furthermore, we measured the horizontal displacements of river channels and vertical offsets of fault scarps. The faulted ridge on the s2 fan and faulted gully on the s3 fan provide good linear markers for obtaining the fault left-lateral dislocation. We used the graphical dislocation measurement software LaDiCaoz developed based on Matlab to restore the gully position before the earthquake by comparing the gully morphology on both sides of the fault, and then determined the horizontal offset of s2, which is(4.3±0.4)m and that of s3 is(8.6±0.6)m. In addition, based on the DEM data, we extracted the fault scarp densely along the fault strike, and obtained the vertical offset of s2, which is(4.3±0.4)m and that of s3 is(1.79±0.16)m. Moreover, we detect slope breaks in the fault scarp morphology. For compound fault scarps generated by multiple surface rupture earthquakes, there are multiple inflection points on the slope of the topographic section, and each inflection point represents a surface rupture event. Therefore, the slope break point on the scarp becomes an important symbol of multiple rupture of the fault. The statistical result shows that the slope breaks number of s2 is 1 and that of s3 is 2. Based on the analysis of horizontal displacements of river channels and vertical offsets of fault scarps as well as its slope breaks, two surface rupturing events can be confirmed along the Tangjiapo area of the Haiyuan Fault. Among them, the horizontal and vertical displacements of the older event are(4.3±0.95)m and(0.85±0.22)m, respectively, while that of the latest event are(4.3±0.4)m and(0.95±0.14)m, which are the coseismic horizontal and vertical offsets of the 1920 Haiyuan earthquake. These recognitions have improved our cognitive level of the fine structure of seismic surface rupture and ability to recognize paleoearthquake events. Therefore, the high-resolution topographic data obtained from the SfM photogrammetry method can be used for interpretation of fine structure and quantitative analysis of microgeomorphology. With the development of research on tectonic geomorphology and active tectonics toward refinement and quantification, this method will be of higher use value and practical significance.  相似文献   

20.
Coseismic displacement plays a role in earthquake surface rupture, which not only reflects the magnitude scale but also has effect on estimates of fault slip rate and earthquake recurrence intervals. A great historical earthquake occurred in Huaxian County on the 23rd January 1556, however, there was lack of surface rupture records and precise coseismic vertical displacements. It's known that the 1556 Huaxian earthquake was caused by Huashan front fault and Weinan plateau front fault, which are large normal faults in the east part of the southern boundary faults in Weihe Basin controlling the development of the basin in Quaternary. Here, we made a study on three drilling sites in order to unveil the coseismic vertical displacements. It is for the first time to get the accurate coseismic vertical displacements, which is 6m at Lijiapo site of Huashan front fault, 7m at Caiguocun site, and 6m at Guadicun site of Weinan plateau front fault. These coseismic displacements measured based on same layers of drilling profiles both at footwall and hanging wall are different from the results measured by former geomorphological fault scarps. It's estimated that some scarps are related with the nature reformation and the human beings' activities, for example, fluviation or terracing field, instead of earthquake acticity, which leads to some misjudgment on earthquake displacements. Moreover, the vertical displacements from the measurement of geomorphological scarps alone do not always agree with the virtual ones. Hence, we assume that the inconsistency between the results from drilling profiles and geomorphological scarps in this case demonstrates that the fault scarp surface may have been demolished and rebuilt by erosion or human activities.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号