首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 527 毫秒
1.
川西地震强化监视区属于计划建立的中国内地首批5个地震强化监视区之一。在初步方案中,该区沿川滇活动地块的东北—东部边界的—部分展布,区内有鲜水河断裂中一南段,安宁河、则木河以及大凉山等活动断裂,总面积约为6万平方千米。本文着重介绍了川西地震强化监视区的基本情况、历史与现今强震活动背景、中长期地震潜势、现有的工作基础和监测能力。最后,作者提出在该区开展强化监测工作的建议,以及与该区中期一短期震情跟踪和预报实践紧密相关的研究课题。  相似文献   

2.
云南是一个新构造运动复杂,地震活动强烈的地区。自有地震记载以来,该区共发生7—7.9级地震16次,8级地震1次。通过对云南新构造运动特点分析该区新构造运动分区现象及年代学差异明显,全新世断裂活动主要集中在新构造单元边界断裂和新构造运动强烈地区的较大规模的断裂上,这些断裂大多是7级以上大震的发震构造。  相似文献   

3.
毛玉平  吴伯黔 《地震研究》1997,20(4):438-446
云南是一个新构造运动复杂、地震活动强烈的地区。自有地震记载以来,该区区发生7-7.9级地震16次,8级地震1次。通过对运动新构造运动特点分析该区新构造运动分区现象及年代差异明显,全新世断裂活动主要集中在新构造单元边界断裂和新构造运动 强烈地区的较大规模的断裂上,这些断裂大多是7级以上大震的发震构造。  相似文献   

4.
鄂豫皖交界地区地震地质背景与中强地震复发特征的研究   总被引:1,自引:2,他引:1  
鄂豫皖交界地区位于东大别山西部,历史中强地震(M≥43/4)主要发生在土地岭-落儿岭及商城-麻城断裂带上,且“互动”和“连动”的特征较为显著。根据这一特征,在研究东大别山区域地质、地壳结构、断裂活动及地震构造应力场特征的基础上,可将鄂豫皖交界地区的中强地震作为秦岭-大别山活动地块中的次级地块的整体活动来看待。该区历史地震活动整体表现为丛集特征,而主要发震断层(土地岭-落儿岭断裂)的历史地震活动则具有相对较好的准周期性。地震复发周期研究提示,该地块近期发生M≥5.0左右地震的危险性较大,而霍山-六安地区为未来发生中强地震的主要危险区。  相似文献   

5.
大同5.6级地震前后的重力场变化和深部动力学过程   总被引:8,自引:0,他引:8  
详细讨论了大同5.6级地震前后重力场变化,并结合该区地震活动性、地震地质特征、地壳深部构造特征等资料,对该区深部动力学过程进行了探讨。认为:地震前后、该区出现了明显、大范围的重力场;产生这种变化的原因是该区地壳深部的低速-高导块体在应力不断的作用下,其塑性物质沿深大断裂上涌和侧向运移,中下地壳间发生层间水平滑移,导致密度发生变化而引起重力场变化。  相似文献   

6.
成都平原最大可能地震能力估计   总被引:4,自引:1,他引:4  
成都平原位于青藏高原的东南缘,紧靠龙门山推覆构造带。近代地壳运动,断裂活动和地震活动水平应介于青藏高原活动构造区和四川盆地弱活动构造区的过渡地带。本文从构造类比角度对成都平原的最大可能地震能力进行了评估;结果表明其最大可能地震能力高于该区的地震史载水平。其中,蒲江-新津-成都德阳断裂可达6±0.5级,大邑-彭县-绵竹隐伏断裂可达5.6级左右。  相似文献   

7.
辽宁西部地区主要活动性断裂与地震   总被引:1,自引:0,他引:1  
依据野外实际工作成果,论述了辽宁西部地区三条北东向活动断裂,即:医巫闾山西侧断裂、北票-朝阳断裂及朱碌科-叨尔登断裂的活动特征、活动时代和活动方式,并结合辽西地区历史地震与现今地震活动特征,提出了该区今后地震危险性地段。  相似文献   

8.
青海可可西里地区是青藏高原腹地,自有仪器记录以来,共发生Ms≥6.0级地震8次,是海省中强地震的主要发震场所之一。本文根据对青海可可西里地区活动断裂的野外考察,较为详细地研究了该区五条活动断裂的几何形态、空间分布及动力学特征。对该区地震活动与构造应力场的关系进行了探讨。结果表明:青海可可西里地区的活动断裂为继承性全新世活动断裂,多发育着史前和现代地震破裂形变带,是该区的主要发震断裂。其中乌兰乌拉湖─岗齐曲活动断裂带是现代地震的主要发震断裂,地表出露有1988年4月5日唐古拉Ms=7.0级地震的破裂形变带,长达9公里。通过对可可西里地区的野外考察,未发现国外报道的1973年7月16日青海可可西里地区火山活动的事实。  相似文献   

9.
通过以冀东地区活动断裂与地震关系的研究,对今后该区的地震活动程度进行了估计,并对区域稳定性进行了初步的工程地质这对冀东地区震害预测和经济发展都提供了一定的依据。  相似文献   

10.
张北近场资料处理及震源区地震分布三维图像   总被引:2,自引:1,他引:2  
简要介绍张北近场地震资料处理软件平台的主要功能,提出了计算机自动查找近场地震事件的快速有效方法,解决了小震、微震的快速查找,提出了利用密集的震源区精确地震定位结果获得该区地震分布三维图像的方法,可以反映震源区活动构造的三维形态,获得了张北震源区地震分布的三维图像,它展现了该区域现今活动断裂分布的三维构造格局。该震源区周围存在五条断裂,北东和北西向的四条断裂围成的“棱形”边界包围了震中区,北东向的(1)和北西向的(2)及北北西向的(3)三条断裂交汇于单晶河附近,地震分布最密集的区域位于该三条断裂的交汇处附近,该区域的地震主要是由这三条断裂的活动所造成。  相似文献   

11.
1988年澜沧-耿马地震的震源特征及其有限元模拟   总被引:1,自引:0,他引:1       下载免费PDF全文
本文根据澜沧-耿马地震序列余震分布图像的变化,以及用复合型法反演主震破裂过程的研究结果,提出了澜沧-耿马地区北北西走向顺向雁行型双断层力学模型.用断裂力学有限元方法进行数字模拟研究表明:模型中的两个内端点区之间是主压应力的相对低值区,而剪应力分布在两个内端点区为高值区且以较大梯度向中心衰减,两次7级地震后接连发生的4次近东西走向的6级余震主要发生在这一带.由于压应力的减弱、剪应力的增加,使近东西走向的断层上摩擦力减小,有利于发生剪切错动,引发近东西走向分布的强余震;当区域主压应力方向取北北东向时,断层的理论滑动矢量图显示出右旋走滑性质,与震源机制及地表考查结果一致.当区域主压应力方位取值在NE25°附近且北部7.2级震区的弹性模量相对南部7.6级震区足够大时,北部断层1的相对滑动矢量可比南部断层2大,从而导致7.2级地震的震中烈度大于7.6级地震的烈度异常分布.  相似文献   

12.
潮汐应力对发震断层作用的统计分析   总被引:8,自引:0,他引:8  
计算了中国及邻区1069个地震震源处沿主压应力P轴和主张力T轴方向的潮汐应力分量,并分析了这些量对发震断层的作用方式,按纬度区域统计了与潮汐应力促滑作用有关的发震断层类型以及它们与潮汐应力作用方式的关系,得到了如下结论:与潮汐应力促滑作用有关的发震断层数的比例随区域纬度增加有减小趋势。其中,走滑型断层的比例在低纬区较大,而倾滑斜滑型断层的比例在中高纬度区较大;对发震断层有促滑作用的潮汐应力作用方式分增压型和减压型。对整个统计区域而言,与增压型潮汐应力促滑作用有关的发震断层数比例大于与减压型潮汐应力促滑作用有关的发震断层;对不同的纬度区域,不同的潮汐应力作用方式与之促滑的断层类型也有不同的分布特征。  相似文献   

13.
Introduction Earthquakes are direct results from tectonic deformation and crustal movements, which usu- ally contain abundant information of crustal stress status and medium property in the deep lithosphere. Seismic activities might reflect accumulation and concentration of crustal stress in the seismogenic process. And different mechanisms of rock ruptures lead to different precursory phe- nomena prior to earthquakes (ZHANG, et al, 2001). Therefore, seismic activities before a strong earthq…  相似文献   

14.
在对1966年以来63次强震前中等地震活动图象全时空扫描的基础上,讨论了大陆不同构造区域、不同震源机制强震前中等地震活动图象异常演化特征及其主要活动图象与震源机制节面的相关性. 研究表明:强震前中等地震活动图象显现出应力集中和减弱两个阶段性特征,第一阶段(中期阶段)的活动图象以条带、空区和集中活跃为主;第二阶段(中短期)以持续平静为主. 走滑和正断层机制震前显示出较好的特征图象;逆冲断层震前的活动图象与其它两种机制的图象不同,没有明显的特征图象,两个阶段都有平静现象出现. 强震前中等地震条带走向与震源机制的两个节面走向一致性较好,但空区的一致性较差.   相似文献   

15.
张慧 《中国地震研究》2016,30(1):119-130
基于海南省地震台网2000~2013年的区域地震波形数据,用剪切波分裂系统分析方法(SAM)获得了海南琼东北部地区“九五”数字台网中2个台站的剪切波分裂参数。结果表明,快剪切波偏振优势方向代表了原地最大主压应力方向。七星岭台NE方向的快剪切波偏振优势方向与区域水平主压应力场方向不一致,与NE走向的断裂一致,体现了局部构造和局部应力场的复杂性;青山岭NNE向的快剪切波偏振优势方向揭示了NNE走向断裂的构造意义。同时,本研究证实,位于活动断裂上或几条活动断裂交汇部位的台站的快剪切波偏振优势方向,与对所选用的小地震起控制作用的活动断裂走向一致,并且快剪切波偏振优势方向较为离散,反映了该区域复杂的断裂构造和应力分布特征。  相似文献   

16.
Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention. From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle. The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa. Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region.  相似文献   

17.
In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.  相似文献   

18.
2014年2月12日,在新疆于田县发生了里氏7.3级地震.在该地震震中附近,前人研究证明发育了大量规模不同的活动断层(如康西瓦断裂与贡嘎错断裂等).根据地震触发理论,地震发生后因地壳同震变形会导致其周边不同性质断裂破裂应力发生变化,进而影响其地震的潜在危险性.本文利用地震远场波形记录,反演了该地震滑动模型.之后,根据弹性无限半空间位错理论,计算了该地震在近场范围内活动断裂上的同震应力变化.其目的在于讨论于田地震引起的附近断裂上的库仑应力变化以及这些活动断裂可能潜在的地震危险性.在地震发生后,从国际地震学联合会(IRIS)地震数据中心,下载了震中距离介于30°~90°的地震远场波形记录,为保证台站方位角分布均匀,从中挑选了27个不同方位角的高信噪比地震记录参与理论地震图的生成和波形反演过程.我们采用广义射线理论计算生成远场理论地震波形数据.每个子断层参数的反演则利用基于全局化反演的快速模拟退火反演方法.在有限断层反演过程中,我们采用了强调波形拟合的相关误差函数作为待反演的目标函数,拟合的断层参数使目标函数为最小.之后,根据弹性无限半空间位错理论,以库仑破裂准则为基础,结合反演得到的地震震源机制解和地震位错模型,计算该地震引起的近场断层面上库仑应力的变化.由远场波形计算结果可以看到,于田地震的震源深度为10km,地震断层的倾角约71.9°,破裂面上最大的同震位移达到210cm,以左旋走滑为主并具有正倾滑分量,地震能量主要在前15s内释放.由此得到该地震的地震矩为2.91×1019 N·m,地震震级为Mw6.9.于田地震引发的余震,大致分布在三个区域内:普鲁断裂北部、康西瓦断裂东部和贡嘎错断裂中部.弹性应力计算结果表明,于田地震导致阿尔金断裂西段、普鲁断裂中段、康西瓦断裂东段和贡嘎错断裂中段的静态库仑应力明显增加,其中以康西瓦断裂东段和贡嘎错断裂中段应力增量为最大,分别达到了0.05 MPa和0.04 MPa.大量研究证明,当地震所导致的库仑应力变化大于0.01 MPa时将具有明显的地震触发作用.根据本文结果,2014年于田Mw6.9地震使普鲁断裂、贡嘎错断裂和康西瓦断裂上的库仑应力增量均超过了触发阈值,具有被触发出地震的潜在危险.因此,在以后的地震学研究中,应加强对该三条断裂地震危险性的研究和监测.此外,近6年以来,研究区域发生了3次6级以上的地震.这些地震均沿着贡嘎错断裂,由南西向北东迁移,逐步靠近阿尔金断裂,并且逐渐由正倾滑型地震转变为走滑型地震.阿尔金断裂的走滑速率达到了9mm·a-1,所以,尽管本次地震导致的阿尔金断裂库仑应力增量小于0.01 MPa,阿尔金的地震危险性也应该加强监测.  相似文献   

19.
新丰江水库诱发地震的构造条件   总被引:10,自引:0,他引:10       下载免费PDF全文
本文在地质考察的基础上,采用数学模拟方法,重演了本区的地震序列,论证了诱发地震的构造条件。指出,新丰江水库有两组发震构造,它们的活动强度和时间有所不同。诱发地震的发震构造与水库蓄水前构造地震的发震构造属于相同构造体系,唯发震部位更逼近水库。文章还指出,库基弹性变形引起的附加引张应变使部分地区的活动断裂更易于错动。水库荷载还使地震在剖面上有浅层和深层之分。它们的频度与水库水位有不同的相关性  相似文献   

20.
2008年汶川地震的破裂模型及引起的余震活动分析   总被引:2,自引:0,他引:2       下载免费PDF全文
用两种发震构造的破裂位移分布模型对2008年汶川地震造成的区域主要断裂的库仑应力变化进行了模拟.通过对这两种破裂位移模型模拟结果的对比分析,表明破裂位移模型的逆冲兼右旋滑动的位移模式及南北两段分别有两个滑动量高值区这样的特点控制了区域库仑应力变化的总体分布特征.汶川地震的余震分布和计算结果还显示:所获得的区域主要断裂的...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号