共查询到20条相似文献，搜索用时 31 毫秒
1.
The Solar TErrestrial RElations Observatory (STEREO) requires powerful tools for the three-dimensional (3D) reconstruction of the solar corona. Here we test such a program
with data from SOHO and TRACE. By taking advantage of solar rotation, a newly developed stereoscopy tool for the reconstruction
of coronal loops is applied to the solar active region NOAA 8891 observed from 1 March to 2 March 2000. The stereoscopic reconstruction
is composed of three steps. First, we identify loop structures in two TRACE images observed from two vantage viewpoints approximately
17 degrees apart, which corresponds to observations made about 30 hours apart. In the second step, we extrapolate the magnetic
field in the corona with the linear force-free field model from the photospheric line-of-sight SOHO/MDI data. Finally, combining
the extrapolated field lines and one-dimensional loop curves from two different viewpoints, we obtain the 3D loop structures
with the magnetic stereoscopy tool. We demonstrate that by including the magnetic modeling this tool is more powerful than
pure geometrical stereoscopy, especially in resolving the ambiguities generated by classical stereoscopy. This work will be
applied to the STEREO mission in the near future. 相似文献
2.
Markus J. Aschwanden 《Solar physics》2005,228(1-2):339-358
EUV images show the solar corona in a typical temperature range of T >rsim 1 MK, which encompasses the most common coronal structures: loops, filaments, and other magnetic structures in active regions,
the quiet Sun, and coronal holes. Quantitative analysis increasingly demands automated 2D feature recognition and 3D reconstruction,
in order to localize, track, and monitor the evolution of such coronal structures. We discuss numerical tools that “fingerprint”
curvi-linear 1D features (e.g., loops and filaments). We discuss existing finger-printing algorithms, such as the brightness-gradient
method, the oriented-connectivity method, stereoscopic methods, time-differencing, and space–time feature recognition. We
discuss improved 2D feature recognition and 3D reconstruction techniques that make use of additional a priori constraints, using guidance from magnetic field extrapolations, curvature radii constraints, and acceleration and velocity
constraints in time-dependent image sequences. Applications of these algorithms aid the analysis of SOHO/EIT, TRACE, and STEREO/SECCHI
data, such as disentangling, 3D reconstruction, and hydrodynamic modeling of coronal loops, postflare loops, filaments, prominences,
and 3D reconstruction of the coronal magnetic field in general. 相似文献
3.
We undertake a first attempt towards a consistent reconstruction of the coronal magnetic field and the coronal density structure. We consider a stationary solar corona which has to obey the equations of magnetohydrostatics. We solve these equations with help of a newly developed optimization scheme. As a first step we illustrate how tomographic information can be included into the reconstruction of coronal magnetic fields. In a second step we use coronal magnetic field information to improve the tomographic inversion process. As input the scheme requires magnetic field measurements on the photosphere from vector-magnetographs and the line-of-sight integrated density distribution from coronagraphs. We test our codes with well-known analytic magnetohydrostatic equilibria and models. The program is planned for use within the STEREO mission. 相似文献
4.
Markus J. Aschwanden Jong Kwan Lee G. Allen Gary Michael Smith Bernd Inhester 《Solar physics》2008,248(2):359-377
The three-dimensional (3D) modeling of coronal loops and filaments requires algorithms that automatically trace curvilinear
features in solar EUV or soft X-ray images. We compare five existing algorithms that have been developed and customized to
trace curvilinear features in solar images: i) the oriented-connectivity method (OCM), which is an extension of the Strous pixel-labeling algorithm (developed by Lee,
Newman, and Gary); ii) the dynamic aperture-based loop-segmentation method (developed by Lee, Newman, and Gary); iii) unbiased detection of curvilinear structures (developed by Steger, Raghupathy, and Smith); iv) the oriented-direction method (developed by Aschwanden); and v) ridge detection by automated scaling (developed by Inhester). We test the five existing numerical codes with a TRACE image
that shows a bipolar active region and contains over 100 discernable loops. We evaluate the performance of the five codes
by comparing the cumulative distribution of loop lengths, the median and maximum loop length, the completeness or detection
efficiency, the accuracy, and flux sensitivity. These algorithms are useful for the reconstruction of the 3D geometry of coronal
loops from stereoscopic observations with the STEREO spacecraft, or for quantitative comparisons of observed EUV loop geometries
with (nonlinear force-free) magnetic field extrapolation models. 相似文献
5.
Measurement of the coronal magnetic field is a crucial ingredient in understanding the nature of solar coronal phenomena at all scales. We employed STEREO/COR1 data obtained during a deep minimum of solar activity in February 2008 (Carrington Rotation CR 2066) to retrieve and analyze the three-dimensional (3D) coronal electron density in the range of heights from 1.5 to 4 R⊙ using a tomography method. With this, we qualitatively deduced structures of the coronal magnetic field. The 3D electron-density analysis is complemented by the 3D STEREO/EUVI emissivity in the 195 Å band obtained by tomography for the same CR. A global 3D MHD model of the solar corona was used to relate the reconstructed 3D density and emissivity to open/closed magnetic-field structures. We show that the density-maximum locations can serve as an indicator of current-sheet position, while the locations of the density-gradient maximum can be a reliable indicator of coronal-hole boundaries. We find that the magnetic-field configuration during CR 2066 has a tendency to become radially open at heliocentric distances greater than 2.5 R⊙. We also find that the potential-field model with a fixed source surface is inconsistent with the boundaries between the regions with open and closed magnetic-field structures. This indicates that the assumption of the potential nature of the coronal global magnetic field is not satisfied even during the deep solar minimum. Results of our 3D density reconstruction will help to constrain solar coronal-field models and test the accuracy of the magnetic-field approximations for coronal modeling. 相似文献
6.
SECCHI-EUVI telescopes provide the first EUV images enabling a 3D reconstruction of solar coronal structures. We present a
stereoscopic reconstruction method based on the Velociraptor algorithm, a multiscale optical-flow method that estimates displacement maps in sequences of EUV images. Following earlier
calibration on sequences of SOHO-EIT data, we apply the algorithm to retrieve depth information from the two STEREO viewpoints
using the SECCHI-EUVI telescope. We first establish a simple reconstruction formula that gives the radial distance to the
centre of the Sun of a point identified both in EUVI-A and EUVI-B from the separation angle and the displacement map. We select
pairs of images taken in the 30.4 nm passband of EUVI-A and EUVI-B, and apply a rigid transform from the EUVI-B image in order
to set both images in the same frame of reference. The optical flow computation provides displacement maps from which we reconstruct
a dense map of depths using the stereoscopic reconstruction formula. Finally, we discuss the estimation of the height of an
erupting filament. 相似文献
7.
Polar plumes appear as elongated objects starting at the solar polar regions. Here we analyze these objects from a sequence of images taken simultaneously by the three spacecraft telescopes STEREO/EUVI A and B, and SOHO/EIT. We establish a method capable of automatically identifying plumes in solar EUV images close to the limb at 1.01?–?1.39?R ⊙ in order to study their temporal evolution. This plume-identification method is based on a multiscale Hough-wavelet analysis. Then two methods to determine the 3D localization and structure of the plumes are discussed: first, tomography using filtered back-projection and including the differential rotation of the Sun and, second, conventional stereoscopic triangulation. We show that tomography and stereoscopy are complementary for studying polar plumes. We also show that this systematic 2D identification and the proposed methods of 3D reconstruction are well suited to identify plumes individually and also to analyze the distribution of plumes and inter-plume regions. Finally, the results are discussed, focusing on plume position and cross-sectional area. 相似文献
8.
We present a method to include stereoscopic information about the three-dimensional structure of flux tubes into the reconstruction of the coronal magnetic field. Due to the low plasma beta in the corona we can assume a force-free magnetic field, with the current density parallel to the magnetic field lines. Here we use linear force-free fields for simplicity. The method uses the line-of-sight magnetic field on the photosphere as observational input. The value of is determined iteratively by comparing the reconstructed magnetic field with the observed structures. The final configuration is the optimal linear force-free solution constrained by both the photospheric magnetogram and the observed plasma structures. As an example we apply our method to SOHO MDI/EIT data of an active region. In the future it is planned to apply the method to analyse data from the SECCHI instrument aboard the STEREO mission. 相似文献
9.
Previous attempts to produce three-dimensional (3-D) reconstructions of coronal mass ejections (CMEs) have required either
modeling efforts or comparisons with secondary associated eruptions near the solar surface. This is because coronagraphs are
only able to produce sky-plane-projected images of CMEs and it has hence been impossible to overcome projection effects by
using coronagraphs alone. The SECCHI suite aboard the twin STEREO spacecraft allows us to provide the means for 3-D reconstruction
of CMEs directly from coronagraph measurements alone for the first time. We present these measurements from two CMEs observed
in November 2007. By identifying common features observed simultaneously with the LASCO coronagraphs aboard SOHO and the COR
coronagraphs aboard STEREO we have triangulated the source region of both CMEs. We present the geometrical analysis required
for this triangulation and identify the location of the CME in solar-meridional, ecliptic, and Carrington coordinates. None
of the two events were associated with an easily detectable solar surface eruption, so this triangulation technique is the
only means by which the source location of these CMEs could be identified. We present evidence that both CMEs originated from
the same magnetic structure on the Sun, but from a different magnetic field configuration. Our results reveal some insight
into the evolution of the high corona magnetic field, including its behavior over time scales of a few days and its reconfiguration
after a major eruption. 相似文献
10.
Data from the STEREO (Solar Terrestrial Relations Observatory) mission are intensively used for 3D reconstruction of solar coronal structures. After the launch of the SDO (Solar Dynamic Observatory) satellite, its additional observations give the possibility to have a third eye for more accurate 3D reconstruction in the very low corona (<?1.5?R ??). With our reconstruction code MBSR (Multi-view B-spline Stereoscopic Reconstruction), we use three view directions (STEREO A, B, and SDO) to perform the 3D reconstruction and evolution of a prominence which triggered a CME on 1 August 2010. In the paper we present the reconstruction of this prominence from the moment it starts to erupt until it leaves the field of view of the coronagraph. We also determine the evolution of the leading edge of the CME. Based on the temporal evolution, we analyze some of its properties, such as velocity, acceleration, opening and rotation angles and evolution of the cavity. 相似文献
11.
Tilaye Tadesse T. Wiegelmann P. J. MacNeice K. Olson 《Astrophysics and Space Science》2013,347(1):21-27
The magnetic fields in the solar atmosphere structure the plasma, store free magnetic energy and produce a wide variety of active solar phenomena, like flare and coronal mass ejections (CMEs). The distribution and strength of magnetic fields are routinely measured in the solar surface (photosphere). Therefore, there is considerable interest in accurately modeling the 3D structure of the coronal magnetic field using photospheric vector magnetograms. Knowledge of the 3D structure of magnetic field lines also help us to interpret other coronal observations, e.g., EUV images of the radiating coronal plasma. Nonlinear force-free field (NLFFF) models are thought to be viable tools for those task. Usually those models use Cartesian geometry. However, the spherical nature of the solar surface cannot be neglected when the field of view is large. In this work, we model the coronal magnetic field above multiple active regions using NLFFF extrapolation code using vector magnetograph data from the Synoptic Optical Long-term Investigations of the Sun survey (SOLIS)/Vector Spectromagnetograph (VSM) as a boundary conditions. We compare projections of the resulting magnetic field lines solutions with their respective coronal EUV-images from the Atmospheric Imaging Assembly (SDO/AIA) observed on October 15, 2011 and November 13, 2012. This study has found that the NLFFF model in spherical geometry reconstructs the magnetic configurations for several active regions which agrees to some extent with observations. During October 15, 2011 observation, there are substantial number of trans-equatorial loops carrying electric current. 相似文献
12.
The STEREO mission provides an unprecedented opportunity to reconstruct the 3D configuration of solar features. In this work, we combine SECCHI/EUVI data from both spacecraft by means of a local correlation tracking method. The technique allows an automatic (without user intervention) matching of pixels in both images. This information is then used to triangulate the 3D coordinates of each pixel. We use the method in order to reconstruct and analyze the 3D structure of active regions. In particular, we focus on the extraction of coronal loop heights, observed nearly simultaneously in the 171, 195 and 284 Å passbands. We compare the properties of loops in the different wavelengths and extract valuable information regarding their geometry. In particular, we demonstrate that some loops that look co-spatial in the 171 Å and 195 Å images have in fact different heights and thus occupy different volumes. Our results have important implications for multi-wavelength studies of coronal loops, especially for calculations using filter-ratio techniques. 相似文献
13.
P. C. Liewer E. M. De Jong J. R. Hall R. A. Howard W. T. Thompson J. L. Culhane L. Bone L. van Driel-Gesztelyi 《Solar physics》2009,256(1-2):57-72
A filament eruption, accompanied by a B9.5 flare, coronal dimming, and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5°, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 Å stereoscopic data from about 12 hours before to about 2 hours after the eruption, allowing us to determine the 3D trajectory of the erupting filament. From the 3D reconstructions of the filament and the chromospheric ribbons in the early stage of the eruption, simultaneous heating of both the rising filamentary material and the chromosphere directly below is observed, consistent with an eruption resulting from magnetic reconnection below the filament. Comparisons of the filament during eruption in 304 Å and Hα? show that when it becomes emissive in He II, it tends to disappear in Hα?, indicating that the disappearance probably results from heating or motion, not loss, of filamentary material. 相似文献
14.
Markus J. Aschwanden 《Solar physics》2010,262(2):399-423
We develop a new numerical code with automated feature extraction, customized for tracing of coronal loops, a method we call Oriented Coronal CUrved Loop Tracing (OCCULT), which for the first time breaks even with the results of visual tracing. The method used is based on oriented-directivity tracing of curvi-linear features, but in contrast to other general feature-extraction algorithms, it is customized for solar EUV and SXR images by taking advantage of the specific property that coronal loops have large curvature radii compared with their widths. We evaluate the performance of this new code by comparing the cumulative distribution of loop lengths, the median and maximum loop lengths, the completeness of detection, and the congruency of the detected features with other numerical codes and visual tracings. We find that the new code closely approaches the results of visual perception and outperforms the other existing numerical codes. This algorithm is useful for the 3D reconstruction of the geometry, motion, and oscillations of coronal loops, with single or stereoscopic spacecraft, as well as for modeling of the loop hydrodynamics and the coronal magnetic field. 相似文献
15.
By using two spacecraft equipped with multi-bandpass X-ray telescopes, it is possible to obtain direct 3-dimensional morphology of coronal structures which is essential for understanding the energetics and dynamics of the solar atmosphere. X-ray observations taken only in orbit about the Earth are inadequate to fully resolve the 3-dimensional nature of the solar corona. These Earth-orbit observations produce 2-dimensional images and an appropriate model must be included to derive the 3-dimensional structures from the line-of-sight information. Stereoscopic observations from space will remove this limitation and are needed if we are to improve our knowledge of the 3-dimensional morphology of the corona.Several important points regarding a stereoscopic mission are investigated and illustrated using model coronal flux tubes and image-rendering techniques. Synthesized images are formed by integrating the emission from volume elements along the line-of-sight path through a 3-dimensional volume in which a set of model flux tubes are located. The flux tubes are defined by (1) a plasma model defining the emissivity for a specific density, temperature, and pressure distribution, and (2) a magnetic field model from which a set of field lines are selected to define the geometry of the flux tubes. The field lines are used to define the flux-tube volume by assuming an initial base radius and conservation of flux. An effective instrumental spectral-response function is folded into the integration. Analysis of pairs of these synthesized images with various angular perspectives are used to investigate the effect of angular separation on mission objectives. The resulting images and analysis provide guidelines for developing a stereoscopic mission.Our study produced four important results, namely: (1) An angular separation of 30 degrees maximizes the scientific return by direct triangulation analysis because of the tradeoff between increased line-of-sight resolution of position and decreased recognition of individual loop structures arising from the overlapping of multiple loops with increasing angular separation. (2) The analysis benefits from the use of time-differential images to select flux tubes from the collection of numerous overlapping systems by selecting only recently heated or cooled flux tubes. (3) An analysis needs to be developed for algebraic reconstruction techniques applying a priori information, specific to the solar coronal structures, i.e., flux-tube continuity, maximum emission strength, non-negative emission, previous history, and maximum gradients of emission. (4) An analysis strategy combining triangulation, modeling techniques, and algebraic restoration is necessary to derive a complete understanding of the 3-dimensional morphology of the magnetic field. In the same way that helioseismology is classical viewing of the Sun with a tailored set of analysis tools for probing the interior of the Sun, heliostereoscopy is classical viewing of the X-ray emitting corona and requires a tailored set of analysis tools to deduce the true 3-dimensional structure of the corona. 相似文献
16.
E. K. J. Kilpua P. C. Liewer C. Farrugia J. G. Luhmann C. Möstl Y. Li Y. Liu B. J. Lynch C. T. Russell A. Vourlidas M. H. Acuna A. B. Galvin D. Larson J. A. Sauvaud 《Solar physics》2009,254(2):325-344
We analyze a series of complex interplanetary events and their solar origins that occurred between 19 and 23 May 2007 using
observations by the STEREO and Wind satellites. The analyses demonstrate the new opportunities offered by the STEREO multispacecraft configuration for diagnosing
the structure of in situ events and relating them to their solar sources. The investigated period was characterized by two high-speed solar wind streams
and magnetic clouds observed in the vicinity of the sector boundary. The observing satellites were separated by a longitudinal
distance comparable to the typical radial extent of magnetic clouds at 1 AU (fraction of an AU), and, indeed, clear differences
were evident in the records from these spacecraft. Two partial-halo coronal mass ejections (CMEs) were launched from the same
active region less than a day apart, the first on 19 May and the second on 20 May 2007. The clear signatures of the magnetic
cloud associated with the first CME were observed by STEREO B and Wind while only STEREO A recorded clear signatures of the magnetic cloud associated with the latter CME. Both magnetic clouds
appeared to have interacted strongly with the ambient solar wind and the data showed evidence that they were a part of the
coronal streamer belt. Wind and STEREO B also recorded a shocklike disturbance propagating inside a magnetic cloud that compressed the field and plasma
at the cloud’s trailing portion. The results illustrate how distant multisatellite observations can reveal the complex structure
of the extension of the coronal streamer into interplanetary space even during the solar activity minimum.
Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users. 相似文献
17.
STEREO/EUVI observed 185 flare events (detected above the GOES class C1 level or at >?25 keV with RHESSI) during the first two years of the mission (December 2006?–?November 2008), while coronal mass ejections (CMEs) were reported in about a third of these events. We compile a comprehensive catalog of these EUVI-observed events, containing the peak fluxes in soft X rays, hard X rays, and EUV, as well as a classification and statistics of prominent EUV features: 79% show impulsive EUV emission (coincident with hard X rays), 73% show delayed EUV emission from postflare loops and arcades, 24% represent occulted flares, 17% exhibit EUV dimming, 5% show loop oscillations or propagating waves, and at least 3% show erupting filaments. We analyze an example of each EUV feature by stereoscopic modeling of its 3D geometry. We find that EUV emission can be dominated by impulsive emission from a heated, highly sheared, noneruptive filament, in addition to the more common impulsive EUV emission from flare ribbons or the delayed postflare EUV emission that results from cooling of the soft-X-ray-emitting flare loops. Occulted flares allow us to determine CME-related coronal dimming uncontaminated from flare-related EUV emission. From modeling the time evolution of EUV dimming we can accurately quantify the initial expansion of CMEs and determine their masses. Further, we find evidence that coronal loop oscillations are excited by the rapid initial expansion of CMEs. These examples demonstrate that stereoscopic EUV data provide powerful new methods to model the 3D aspects in the hydrodynamics of flares and kinematics of CMEs. 相似文献
18.
We present a procedure to extract bright loop features from solar EUV images. In terms of image intensities, these features
are elongated ridge-like intensity maxima. To discriminate the maxima, we need information about the spatial derivatives of
the image intensity. Commonly, the derivative estimates are strongly affected by image noise. We therefore use a regularized
estimation of the derivative, which is then used to interpolate a discrete vector field of ridge points; these “ridgels” are
positioned on the ridge center and have the intrinsic orientation of the local ridge direction. A scheme is proposed to connect
ridgels to smooth, spline-represented curves that fit the observed loops. Finally, a half-automated user interface allows
one to merge or split curves or eliminate or select loop fits obtained from this procedure. In this paper we apply our tool
to one of the first EUV images observed by the SECCHI instrument onboard the recently launched STEREO spacecraft. We compare
the extracted loops with projected field lines computed from near-simultaneous magnetograms measured by the SOHO/MDI Doppler
imager. The field lines were calculated by using a linear force-free field model. This comparison allows one to verify faint
and spurious loop connections produced by our segmentation tool and it also helps to prove the quality of the magnetic-field
model where well-identified loop structures comply with field-line projections. We also discuss further potential applications
of our tool such as loop oscillations and stereoscopy. 相似文献
19.
A. W. Sandman M. J. Aschwanden M. L. DeRosa J. P. Wülser D. Alexander 《Solar physics》2009,259(1-2):1-11
The Solar Terrestrial Relations Observatory (STEREO) provides the first opportunity to triangulate the three-dimensional coordinates of active region loops simultaneously from two different vantage points in space. Three-dimensional coordinates of the coronal magnetic field have been calculated with theoretical magnetic field models for decades, but it is only with the recent availability of STEREO data that a rigorous, quantitative comparison between observed loop geometries and theoretical magnetic field models can be performed. Such a comparison provides a valuable opportunity to assess the validity of theoretical magnetic field models. Here we measure the misalignment angles between model magnetic fields and observed coronal loops in three active regions, as observed with the Extreme Ultraviolet Imager (EUVI) on STEREO on 30 April, 9 May, and 19 May 2007. We perform stereoscopic triangulation of some 100?–?200 EUVI loops in each active region and compute extrapolated magnetic field lines using magnetogram information from the Michelson Doppler Imager (MDI) on the Solar and Heliospheric Observatory (SOHO). We examine two different magnetic extrapolation methods: (1) a potential field and (2) a radially stretched potential field that conserves the magnetic divergence. We find considerable disagreement between each theoretical model and the observed loop geometries, with an average misalignment angle on the order of 20°?–?40°. We conclude that there is a need for either more suitable (coronal rather than photospheric) magnetic field measurements or more realistic field extrapolation models. 相似文献
20.
We present for the first time a three-dimensional reconstruction of the electron density in the corona at distances from 1.5R ⊙ to 4R ⊙ using COR1 STEREO observations. The reconstruction is performed using a regularized tomography inversion method for two biweekly periods corresponding to Carrington Rotations 2058 and 2066. Images from the two STEREO spacecraft are used to compare the reconstructed density structures with coronal features located by triangulation. We find that the location of a bright tip of a helmet streamer obtained from the tomographic reconstruction is in good agreement with the location obtained by triangulation. The reconstructed density structure of the equatorial streamer belt is largely consistent with the variation of the current sheet derived from a potential magnetic field extrapolation for most of the equatorial region and for an MHD model of the corona. A zero-value density region in the reconstruction is identified with a low-density region seen in an EUVI image below the reconstruction domain. 相似文献