共查询到20条相似文献，搜索用时 156 毫秒
1.
The method of earthquake-generated converted waves which is based on the simultaneous recording of longitudinal (P), transverse (S) and converted (PS and SP) waves has been used in the U.S.S.R. since 1956. Converted phases generated at crustal and upper-mantle discontinuities in the seismic focal area are carefully analyzed. In this paper some dynamic characteristics of transmitted PS- and SP-waves arising at different types of boundaries are described.
From a comparison of the properties of the recorded converted waves with the results of theoretical computations conclusions can be drawn with regard to the possible structure of the “exchange” (conversion) boundaries. Seismic cross-sections are presented which illustrate the high effectiveness of the method in regional investigations of crustal structure. Owing to its significance and the multitude of observations (over 22,000 km of observation lines) the method is one of the principal seismic techniques used in the U.S.S.R. which give quantitative information on crustal layering. 相似文献
2.
Propagation of elastic waves in discontinuous media is studied in this paper by the scattering matrix method (SMM). An electromagnetic transmission line analogy is also used to set up the mathematical model. The SMM operates in the frequency domain and allows for all wave polarizations (P, SV and SH). Rock masses are examples of discontinuous media in which the discontinuities (fractures or joints) influence wave propagation. Both elastic and viscoelastic joints are considered and the latter are described by Kelvin–Voigt, Maxwell and Burgers models. Rock joints with Coulomb slip behavior are also analyzed, by applying the averaging principle of Caughy (J Appl Mech 27:640–643, 1960). The evaluation of the effects of periodic discontinuities in a homogeneous medium is presented by introducing the concept of Bloch waves. The dispersion curves of these waves are useful to explain the existence of frequency bands of strong attenuation, also in the case of lossless (perfectly elastic) structures. Simple expressions of transmission and reflection coefficients are obtained. Finally, the SMM results are compared with those computed via the distinct element method (DEM). The comparisons are performed on a medium with joints with Coulomb slip behavior and the agreement is satisfactory, although the SMM must be applied in conjunction with the equivalent linearization technique. Even if the DEM is much more general, the SMM in these simple cases is extremely faster and provides a higher physical insight. 相似文献
3.
《Comptes Rendus Geoscience》2015,347(2):66-76
The precise determination and interpretation of anisotropy are relatively difficult because the apparent anisotropy is usually a mixture of intrinsic and extrinsic anisotropy, which might partly hide the true properties of the medium investigated. The artificial anisotropy can be due to the fact that seismic waves do not ‘see’ the real details of a medium, but a ‘filtered’ (or ‘upscaled’) version of the Earth model. This can be due to a bad quality of the data coverage, to limited frequency band effects, or to errors in the approximate theory. With the limitation to layered Earth models, through comparisons of the results of the homogenization method with those of the periodic isotropic two-layered model as an analytical solution, we illustrate that the Backus theory for the long wavelength equivalent effect can be extended to calculate the extrinsic anisotropy, due to upscaling effects at discontinuities for the general isotropic layered model, when its spatial scale is much less than or equal to the seismic wavelength. We find that the extrinsic radial S-wave anisotropy produced by the vertical heterogeneities in the upper mantle of the Earth can be as large as 3% (about 30% extrinsic anisotropy of the 10% radial anisotropy). To better recover information from seismic data, we propose a surface wave phase velocity inversion method based on the first-order perturbation theory. We show that resolution at discontinuities can be improved by adding overtone modes of surface wave data. For more general layered models, the homogenization method could be considered, which can flexibly adapt the scale of the model to seismic wavelengths. However, the periodic isotropic two-layered model can also help to analytically quantify the amount of extrinsic radial, and possibly azimuthal anisotropy produced by the tilted fine layering. 相似文献
4.
钻孔摄像技术能够采集到大量地下岩体内的结构面数据,分析其数据有助于进一步揭示结构面的空间分布规律和组合关系。针对钻孔内获得的结构面几何参数的特殊性,提出了综合倾角、倾向和位置深度等参数的特征点描述方法,在局部坐标系下对结构面特征点的描述方法及计算过程进行了阐述,推导出了结构面几何参数与特征点坐标之间的转换公式,在全局坐标系下对特征点坐标进行了归一化处理,最后对空间坐标系下特征点的分布规律进行了探索。研究结果表明,（1）空间坐标系下的结构面特征点是结构面几何参数和空间位置的综合反映;（2）特征点在空间的分布反映了结构面的空间组合关系。为结构面的统计分析提供新的思路和方法,有助于开展结构面的空间分布规律和交切关系研究,对钻孔摄像技术的发展和以结构面几何特征为基础的岩体稳定性评价起到积极的推动作用。 相似文献
5.
Characterization, lateral variability and lateral extent of discontinuity surfaces on a Carbonate Platform (Barremian to Lower Aptian, Oman) 总被引：4，自引：0，他引：4
Hiati of various duration in carbonates are commonly expressed as discontinuity surfaces. The understanding of processes that form and affect these surfaces leads to an improved sequence-stratigraphic interpretation, a reliable outcrop correlation, and better models for reservoir compartmentalization. Various intraformational discontinuities were analysed and interpreted in a well-exposed study window, 2·5 km in lateral length and 60 m in height comprising the Barremian-Aptian Qishn Formation (Haushi-Huqf area, central Oman). This study focuses on the lateral extent and morphology of the surfaces, the petrography of the underlying rocks, and the facies changes and geochemical trends across these discontinuities. Furthermore, the lateral variability of discontinuity surfaces was documented. Three genetic types of discontinuities are differentiated: (i) erosion surfaces; (ii) omission surfaces (hard- and firmgrounds); and (iii) composite surfaces with evidence for both subaerial exposure and submarine boring. Field observations, combined with petrographic and geochemical data, suggest that 17 surfaces are laterally extensive for at least 20 km and record relative sea-level fluctuations of regional scale. In contrast, a large number of laterally limited surfaces (<1 km) are related to locally active processes such as waves and current erosion. The lateral variability along extensive surfaces is the result of the depositional environment below the discontinuity, the sea-floor topography, waves and currents and differential erosion. The most pronounced lateral variability is present along six laterally extensive composite surfaces that record terrestrial exposure and subsequent flooding of a tidal flat environment. This variability is caused by spatial variability in the tidal flat environment, meteoric alteration and differential erosion. This study emphasizes the spatial and temporal complexity of processes that form and modify discontinuity surfaces. This variability must be kept in mind when interpretations and correlations are based on one-dimensional sections or cores. 相似文献
6.
模拟三维裂纹问题的扩展有限元法 总被引：4，自引：1，他引：3
扩展有限元法是一种在常规有限元框架内求解强和弱不连续问题的新型数值方法,其计算网格与不连续面相互独立,因此模拟移动不连续面时无需对网格进行重新剖分。给出了模拟三维裂纹问题的扩展有限元法。在常规有限元位移模式中,基于单位分解的思想加进一个阶跃函数和二维渐近裂尖位移场,反映裂纹处位移的不连续性。用两个水平集函数表示裂纹。采用线性互补法求解裂纹面非线性接触条件,不需要迭代,提高了计算效率。采用两点位移外推法计算裂纹前缘应力强度因子。给出了3个三维弹性静力问题算例,其结果显示了所提方法能获得高精度的应力强度因子,并能有效地处理裂纹面间的接触问题,同时表明扩展有限元结合线性互补法求解不连续问题具有较好的前景。 相似文献
7.
在节理岩质边坡的稳定性分析中,往往很少考虑结构面的随机分布特征。结构面网络模拟能较好地模拟结构面的随机分布,因此,本文将结构面网络模拟应用于节理岩质边坡的稳定性分析中。首先,运用岩体结构面网络模拟技术,建立岩质边坡的结构面网络模型。然后,将模拟的结果与有限元强度折减法相结合求取边坡的安全系数。最后,对边坡进行一定次数的结构面网络模拟并得到对应的安全系数,进而进行节理岩质边坡的可靠性分析。工程实例结果表明:(1)节理岩质边坡的稳定性主要受坡面附近结构面的数量及切割组合关系影响,结构面的数量越多,连通情况越好,则边坡稳定性安全系数越小; (2)该边坡的平均稳定性安全系数为3.06,失效概率为5%,表明该边坡有较高的可靠性,这与实际情况比较一致。本文的分析方法主要考虑了结构面的随机分布特征,能为节理岩质边坡的稳定性分析提供一条新的思路和方法。 相似文献
8.
岩体结构面产状是影响岩体力学性质及工程稳定性的重要地质因素.从钻孔孔壁电视平展图上可较精确地提取结构面迹线上不共线三点的相对二维坐标(d, h),再利用空间解析几何理论确定其三维空间相对坐标(x, y, z),并求得结构面法向矢量.根据钻孔孔壁与坡面及结构面产状的空间几何关系,在保持原点不变的情况下,采用空间坐标变换的方法,将三维坐标系z轴和y轴分别转化为竖直方向z′和正北地理方向y′,并确定转化后坐标系空间的结构面法向矢量.再从结构面产状的定义出发,根据结构面法向矢量与结构面倾向、倾角的相关性,建立了一个空间几何模型,通过该模型可求得任意平直坡面上任一钻孔内局部岩体结构面的产状. 相似文献
9.
多参数岩体结构面优势分组方法研究 总被引：2，自引：0，他引：2
在岩体力学和水力学分析中,搞清岩体结构面的分布规律是一项重要的基础工作。当岩体结构面的产状一致,而其他性质不一致时,岩体结构面的力学和水力学性质是不同的,而传统的方法仅根据岩体结构面的产状进行分组,这势必存在缺陷。提出了一种基于变尺度混沌优化算法的多参数结构面数据的优势组划分方法,通过度量结构面之间的相似性建立目标函数,运用变尺度混沌优化算法搜索目标函数的最优解来确定聚类中心,可同时考虑结构面的多个参数,把具有相似性质的结构面归并成组。通过计算机模拟的结构面数据验证了此算法的正确性,最后将此算法应用于实际工程中测量的多参数结构面数据的优势组划分,得到了清晰可靠的分组结果。 相似文献
10.
高速远程滑坡的演化机制与运动过程受控于岩体结构.以重庆市武隆县鸡尾山滑坡为例,采用地面激光扫描技术,获取岩体结构面几何信息,基于离散元数值模拟方法,考虑岩体结构特征,分析高速远程滑坡演化过程及其致灾范围.研究结果表明:(1) 岩体结构特征由岩体内部发育的结构面所决定,针对点云数据开展空间几何计算与聚类分析,可以快速精细地获取岩体结构面产状信息,从而进行岩体结构面识别与组别划分;(2) 将岩体结构特征评价结果导入离散元模型中,能够实现高速远程滑坡致灾范围的快速评价目的,并且取得了与实际滑动距离较为吻合的结果. 相似文献
11.
Dynamic photoelasticity is used as a means for visualizing the complex interaction process between elastic waves and geometrical discontinuities. The photoelastic experiments are back-analysed by the dynamic finite difference program WAVE, and the code is assessed in terms of its accuracy and modelling capabilities. Three model geometries are investigated: (i) a stope situated within a homogeneous medium; (ii) a stope surrounded by softened material, the interface between the softened and bulk material being bonded and (iii) a stope situated within softened material, with a non-cohesive material interface. Prominent waves resulting from the diffraction, refraction and reflection of incident waves, as well as normalized dynamic stress intensification factors at the stope face, stope back area and along the hanging-wall skin are analysed in this study. The parting planes are found to reflect a portion of the incident energy and thus shield the stope. However, a non-cohesive parting plane traps energy within the hanging-wall beam, and any shielding benefits are negated. WAVE has been proven to model accurately the diffraction, refraction and reflection of stress waves in a homogeneous medium and the interaction with cohesive and non-cohesive interfaces separating two material types. 相似文献
12.
Fisher distribution is the most commonly used probability density function for discontinuity orientations. Based on Fisher distribution, Monte Carlo simulation method for discontinuity orientations was reviewed and improved. Those orientations extending beyond the edge of an upper hemisphere projection (OEBEUHP) often have an important influence on both the mean orientation and Fisher constant K, thus affecting simulation results. The detailed algorithms for identifying and adjusting those OEBEUHP were developed in this paper. Based on the improved method, a program for generating discontinuity orientations and plotting their stereographic projection maps, named as MCSDO, was developed. Due to the aforementioned adjustment, the generated orientations by MCSDO are close to the original discontinuity orientations, which were mapped in field, and satisfactory. Only the original orientations and target number of generated orientations need to be input. By running the program we can directly obtain the follows: orientations of generated discontinuities, mean orientations of both original and generated discontinuities, Fisher constant K of both original and generated discontinuities, and stereographic projection maps of both original and generated discontinuities. MCSDO is a freeware designed for researchers and practicing engineers, and can be easily mastered with a little computer knowledge. 相似文献
13.
节理岩体中富含结构面等不连续体,其中很多结构面之间具有一定黏结强度,在冲击荷载作用下会发生脱结（debond）行为,从而消耗岩体应变能。在该结构面之间的黏结性质在很大程度上决定着岩体的破坏行为,发生脱结后,结构面之间不再具有黏结强度,岩体的力学性能发生弱化。为了对该类结构面进行模拟,在改进的Xu-Needleman势函数基础上推导出结构面单元,并将其嵌入到单元劈裂法中,模拟结构面的开裂过程,当结构面完全脱结后结构面单元就转化为一般节理单元。相应地,在数值实现过程中只是将结构面单元替换为一般节理单元即可。该结构面单元与单元劈裂法相结合,能够有效地模拟节理岩体的破坏过程。 相似文献
14.
天然岩体中广泛发育两侧岩性不同的异性结构面,开展异性结构面变形和强度特性研究旨在为岩体稳定性评价和利用提供依据。选取三峡库区侏罗系典型的砂岩-泥岩异性岩层,首先运用分形几何理论,定量计算了平直和4种不同不规则起伏形态结构面的粗糙度系数JRC值,然后基于PFC2D颗粒流程序,分别开展了以上5种形态异性结构面的数值剪切试验,获得了各形态结构面在不同正应力下的剪切应力-位移曲线。根据数值试验结果,采用巴顿的JRC-JCS模型分析了异性结构面强度特性,并与同性结构面强度性质进行对比研究。最后,在考虑异性结构面剪切破坏机制的基础上,引入强度因子的概念,提出了新的适用于异性结构面强度评价的两类改进巴顿准则。研究结果表明：异性岩体结构面抗剪强度介于相同粗糙度的两种同性结构面强度之间,在较低正应力下接近软岩同性结构面强度,符合Ⅰ型改进巴顿准则;在较高正应力下偏向硬岩同性结构面强度,符合Ⅱ型改进巴顿准则。实际工程中可利用改进准则并根据异性结构面应力状态对岩体稳定性进行评价,弥补了以往研究的不足。 相似文献
15.
Discontinuities such as fractures or cracks are common in geo-materials. Connectivity is a comprehensive parameter that includes the influence of length, orientation and density of the discontinuities. The main objectives of this paper are to define connectivity based on the statistical geometrical parameters of a network of random discontinuities and to quantify the hydraulic properties of the network using connectivity. An analytical method is first proposed to evaluate connectivity through the density of degree of freedom (DDOF). The analytically estimated DDOF is verified using numerical analysis. DDOF increases with the increases in the mean length, relative orientation and density of the random discontinuity network. Connectivity becomes better and the permeability becomes larger with increasing DDOF. The representative element volume (REV) of a random discontinuity network can be estimated based on connectivity. When a discontinuity network is poorly connected, a REV does not exist when the size of the discontinuity network is smaller than 10 times of the mean length of the discontinuities. When a discontinuity network is normally connected, a REV exists when the REV size is smaller than 10 times of the mean length of the discontinuities. When the discontinuity network is highly connected, the REV size is only 2–4 times of the mean length of the discontinuities. The results indicate that DDOF is a good indicator to quantify the connectivity of a random discontinuity network and the relationship between connectivity and permeability. 相似文献
16.
Multi‐slicing strategy for the three‐dimensional discontinuity layout optimization (3D DLO) 
下载免费PDF全文
下载免费PDF全文 Yiming Zhang 《国际地质力学数值与分析法杂志》2017,41(4):488-507
Discontinuity layout optimization (DLO) is a recently presented topology optimization method for determining the critical layout of discontinuities and the associated upper bound limit load for plane two‐dimensional and three‐dimensional (3D) problems. The modelling process (pre‐processing) for DLO includes defining the discontinuities inside a specified domain and building the target function and the global constraint matrix for the optimization solver, which has great influence on the the efficiency of the computation processes and the reliability of the final results. This paper focuses on efficient and reliable pre‐processing of the discontinuities within the 3D DLO and presents a multi‐slicing strategy, which naturally avoids the overlapping and crossing of different discontinuities. Furthermore, the formulation of the 3D discontinuity considering a shape of an arbitrary convex polygon is introduced, permitting the efficient assembly of the global constraint matrix. The proposed method eliminates unnecessary discontinuities in 3D DLO, making it possible to apply 3D DLO for solving large‐scale engineering problems such as those involving landslides. Numerical examples including a footing test, a 3D landslide and a punch indentation are considered, illustrating the effectiveness of the presented method. © 2016 The Authors. International Journal for Numerical and Analytical Methods in Geomechanics published by John Wiley & Sons Ltd. 相似文献
17.
We delineate shallow structures of the Mozumi–Sukenobu fault, central Japan, using fault zone waves generated by near-surface explosions and detected by a seismometer array. Two explosive sources, S1 and S2, were placed at a distance of about 2 km from the array, and the other two, S3 and S4, were at a distance of about 4 km. Fault zone head waves and fault zone trapped waves following direct P wave arrivals were clearly identified in the seismograms recorded by a linear seismometer array deployed across the fault in a research tunnel at a depth of 300 m. Synthetic waveforms generated by a 3-D finite-difference (3-D FD) method were compared with observed fault zone waves up to 25 Hz. The best fitting model indicates a 200-m-wide low-velocity zone extending at least to shot site S1 located 2 km east of the seismic array with a 20% decrease in the P wave velocity relative to the wall rock. The width of the low-velocity zone is consistent with the fault zone defined by direct geological observation in the research tunnel. However, the low-velocity zone should disappear just to the east of the site S1 to explain the observed fault zone waves for shot S3 and S4 located 4 km east of the seismometer array. Yet the observation and the simulation show notable trapped wave excitation even though shots S3 and S4 are outside the fault zone. These results indicate that (1) the effective waveguide for seismic waves along the fault does not exist east of source site S1 although the surface traces of the fault are observed in this region, and (2) considerable trapped waves can be excited by sources well outside the fault zone. These results highlight the along-strike variability in fault zone structure. 相似文献
18.
岩体的块体结构和结构面网络模型生成,是进行各种力学分析和场分析的基础。详细研究了有限结构面进行复杂块体切割的过程,提出了相应的算法,并采用C++语言编写了相应的程序。为描述块体切割后的复连通特性,在块体数据结构中添加了有向壳的概念。结构面可以为简单的凸多边形,也可采用形态更加复杂的凹多边形。通过面-面求交线、交线环路搜索形成有向环、有向环包含关系分析形成有向面、有向面拓扑搜索形成有向壳和有向壳包含关系分析形成块体等过程,将有限结构面分别与各块体进行切割运算,形成进行块体切割的一般方法。在切割过程中将得到的有向环,有向面、有向壳和块体分别进行拓扑有效性校核,满足要求后得到最终的块体和结构面网络模型。选取4个算例来验证该方法的可行性。计算结果表明,该方法可以对复杂块体进行有效地切割,结构面可以选择包括凹形面在内的复杂多边形,方法具有普遍意义。 相似文献
19.
Frictional slip plane growth by localization detection and the extended finite element method (XFEM)
This paper is concerned with developing a numerical tool for detecting instabilities in elasto‐plastic solids (with an emphasis on soils) and inserting a discontinuity at these instabilities allowing the boundary value problem to proceed beyond these instabilities. This consists of implementing an algorithm for detection of strong discontinuities within a finite element (FE) framework. These discontinuities are then inserted into the FE problem through the use of a displacement field enrichment technique called the extended finite element method (XFEM). The newly formed discontinuities are governed by a Mohr–Coulomb frictional law that is enforced by a penalty method. This implementation within an FE framework is then tested on a compressive soil block and a soil slope where the discontinuity is inserted and grown according to the localization detection. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
20.
针对现有数字钻孔图像分析技术的不足,提出新分析方案以实现数字钻孔摄像技术（BCT）所采集钻孔内壁图像的自动化、定量化结构面检测、识别与分析.首先,对数字钻孔图像进行预处理,设计特征信号DH,检测并获取兴趣区域;然后,使用低精度Hough变换快速检测结构面兴趣区域内的结构面分布特征,利用聚类算法分离出单一结构面后,针对单一结构面进行亚像素级Hough变换,以获取结构面的正弦参数;最后,根据结构面正弦参数,计算出结构面的倾向、倾角等信息.通过对如美水电站左坝肩数字钻孔图像实例进行分析,利用本算法完成图像中结构面的自动分割与特征识别,成功获取其几何信息,并与传统人工辅助方案结果进行对比,验证了该算法的可靠性. 相似文献