共查询到18条相似文献，搜索用时 296 毫秒
1.
强剩磁、强退磁改变了总磁化强度的大小和方向,给磁测资料解释带来困难.为此,本文利用二维井中磁测数据反演磁化强度矢量的二维分布.首先利用井中磁测的磁异常模量反演磁化强度大小的分布.然后,在已知磁化强度大小分布的前提下,拟合磁场分量,反演磁化强度方向的分布.其中,磁化强度大小和方向均用共轭梯度法求解,并通过预优矩阵改善磁化强度大小的反演效果.理论模拟说明,该方法能准确获得磁化强度矢量分布.磁化强度矢量反演结果包括感磁、剩磁及退磁的影响,这为研究强剩磁、高磁化率矿床提供了一种有效方法. 相似文献
2.
在主流的线性最优化大地电磁二维反演中,如何合理构建初始模型是一个亟待解决的问题.常用的是采用均匀半空间或一维反演结果构建初始模型,不易获得稳定可靠的反演效果.实践表明,尽管基于不同初始模型的大地电磁二维反演结果差别较大,但均较初始模型更为接近真实模型.基于这样一种认识,经过反复的理论和实践探索,我们提出构建大地电磁二维反演初始模型的印模法.印模法的基本思想是依据已有反演结果和均匀半空间模型之间的加权来确定下一步二维反演的初始模型,它一方面保留了已有反演结果中关于真实模型的宏观轮廓信息,另一方面,保证了深部电性结构的均匀性,从而满足大地电磁二维正演所要求的底边界条件.基于印模法,本文进一步提出了迭代重构的反演思想.通过多个理论模型和实测数据的反演计算,验证了上述方法可在很大程度上压制初始模型对反演结果的影响. 相似文献
3.
本文对研究区(98°E～103°E, 315°N～34°N) 1∶50万航磁资料的476条南北向剖面采用磁性标量层析成像方法进行了2-D成像反演.每条剖面资料点距1 km，反演的磁性柱体剖面方向宽度1 km，共约277个柱体，深度方向共8层柱体，每层厚度4 km.反演的476个断面的磁性柱体相对磁化强度幅值组成了3-D磁性数据体.对5.5、17.5、21.5、29.5 km深的磁性水平切片和7个北东向的磁性垂直切片表现的磁性特征进行了研究，并进行了地质解释.结合研究区已经公布的地质、地球物理资料，讨论了磁性细结构能提供工程地质灾害数值模拟仿真结构模型的信息，得到了反演的磁性细结构特征比场的特征能提供更多的断层和岩体3.D细节信息的初步认识. 相似文献
4.
可控源音频大地电磁法(CSAMT)一直沿用大地电磁法(MT)的办法,通过计算电场分量与磁场分量的比值,求取卡尼亚视电阻率.而CSAMT场源已知,电场分量和磁场分量都与地下电阻率存在一定的关系,可以单独采用CSAMT电场分量或者磁场分量提取地下介质的视电阻率.本文通过分析电场分量与磁场分量的数据特性,提出利用CSAMT电场单分量数据进行视电阻率的计算,用改进的广义逆矩阵反演方法,使初始模型中的地电层数等于频道个数,克服了以往反演计算中层数较少的问题;实现全场区电场分量视电阻率曲线的拟合反演.同时对单分量视相位计算方法进行分析,结合山西大同地区积水采空区探测及数据解释结果,论证本文提出的单分量解释方法的有效性. 相似文献
5.
本文使用炮并行和区域分解(物理上分割模型,使用基于MPI的分布式存储架构的计算集群,节约单个CPU内核的内存使用量,快速进行正演数值模拟)两种并行算法.该方法的每一步迭代都能确保近似海森矩阵的正定,因此,算法稳健.将时间正向传播的炮波场和反向逆时间传播的残差波场(伴随波场)进行零延迟互相关计算,得到误差泛函的梯度,然后对梯度乘以一个预条件算子,从而加快反演的收敛速度.通过抛物线搜索方法而估计步长,使用L-BFGS算法(限定内存的BFGS算法)求解模型的更新量,进行二维时间空间域弹性波全波形反演.将该反演方法应用到Marmousi2弹性波理论模型,分别反演Marmousi2理论模型的纵波速度、横波速度以及密度等三个参数.我们分别使用截止频率为2 Hz、5 Hz、10 Hz和20 Hz四个阶段的低通巴特沃斯滤波器,采用多尺度的策略,从理论模型数据的低频分量开始反演,将低频分量的反演结果作为高频分量反演时的初始模型,然后依次反演数据的高频分量.理论模型数值试验反演所得到的结果证实:二维时间空间域弹性波全波形反演计算灵活,适用于各种观测系统,能够方便地对地震数据进行加时窗;二维时间空间域弹性波全波形反演所得纵波速度模型的分辨率最高,横波速度模型的分辨率次之,密度模型的分辨率稍微差些. 相似文献
6.
正则化是求解地震层析成像反演问题必须的。一般情况下,地震层析成像方程组非常庞大,合理选择正则化参数非常困难。本文提出一种在线性层析成像反演中实际选择正则化参数的算法。该算法基于大多数层析成像常用的数据统计假设。首先利用Lanczos双对角变换将方程组转换到Krylov子空间。在转换的子空间中,方程组转换成标准阻尼最小二乘正规方程。标准方程组的解可以写成正则化参数的显函数,这使得可以进行计算机方便的选取正则化参数。正则化参数选取的第二个准则是数字化模拟的研究。如果转换空间的维数远小于原始模型空间的维数,此算法的计算效果非常好,特别适用于大型地震层析成像问题。 相似文献
7.
对于时间域航空电磁法二维和三维反演来说,最大的困难在于有效的算法和大的计算量需求.本文利用非线性共轭梯度法实现了时间域航空电磁法2.5维反演方法,着重解决了迭代反演过程中灵敏度矩阵计算、最佳迭代步长计算、初始模型选取等问题.在正演计算中,我们采用有限元法求解拉式傅氏域中的电磁场偏微分方程,再通过逆拉氏和逆傅氏变换高精度数值算法得到时间域电磁响应.在灵敏度矩阵计算中,采用了基于拉式傅氏双变换的伴随方程法,时间消耗只需计算两次正演,从而节约了大量计算时间.对于最佳步长计算,二次插值向后追踪法能够保证反演迭代的稳定性.设计两个理论模型,检验反演算法的有效性,并讨论了选择不同初始模型对反演结果的影响.模型算例表明:非线性共轭梯度方法应用于时间域航空电磁2.5维反演中稳定可靠,反演结果能够有效地反映地下真实电性结构.当选择的初始模型电阻率值与真实背景电阻率值接近时,能得到较好的反演结果,当初始模型电阻率远大于或远小于真实背景电阻率值时反演效果就会变差. 相似文献
8.
瞬变电磁反演存在高度的非线性特征,常用的最小二乘等线性反演方法往往对初始模型高度依赖,并且极易陷入局部最优解.本文基于观测数据与模拟数据的L1范数建立目标函数,采用模拟退火非线性全局最优化方法实现瞬变电磁一维反演.初始模型完全随机产生,通过指数函数退温机制模拟系统能量最小实现迭代,通过接收概率函数评价当前模型,实现局部最优解的跳出,最终实现全局最优化求解.通过数值算例发现,无论给定的反演层数等于还是大于设计模型,都可以获得较好的反演效果,因而可以在反演初始就设计较多的层数,实现反演模型的自动拟合;同时,利用含噪声数据反演进一步验证算法的稳定性.最后,对实测数据进行了反演测试,结果与钻孔编录基本一致,表明提出的基于L1范数的模拟退火反演可用于实测数据处理. 相似文献
9.
磁异常的反演是地球物理勘探的重要手段,三维磁化率反演是磁异常定量解释中的一种重要方法.由于剩磁的存在使得磁化方向与地磁场方向产生偏差,从而影响了磁异常反演与解释的精度.本文基于磁异常模量反演和磁化强度矢量反演方法得到了一种新的磁化强度矢量反演方法.与以往的磁化强度矢量反演方法相比,该方法以磁异常模量反演得到的磁化率模型为约束,采用Lp范数正则化方法求解,提高了磁化强度矢量反演的精度和效率.本文通过模拟试验的反演计算,验证了这种磁化强度矢量反演方法的有效性.最后,将本文方法应用于新疆东天山卡拉塔格地区航磁数据的解释,获得了地下空间不同磁性差异的磁性体的空间分布特征,为进一步分析研究区隐伏矿床提供了重要信息. 相似文献
10.
《地球物理学进展》2016,(4)
使用Zelt和Barton的方法,通过一个计算效率高的有限差分求解eikonal方程,正演计算走时和射线路径.使用最小二乘QR分解法,求解稀疏线性系统方程组.使用正则化层析反演,结合用户给定的最小的、最平坦和最平滑的扰动限制,每一个加权因子随深度变化.结合数据残差和模型粗糙度的最小化,为数据残差提供一个最平滑的近似模型.该反演方法为非线性反演,需要一个初始模型,在每一次迭代时,需要计算新的射线路径.使用二维初至走时数据,对某油田二维井间地震实际资料进行无限频率初至走时层析反演.将反演所得到的速度与井的测井速度曲线相比较,二者吻合程度较高,表明该反演方法所得速度的分辨率比较高.证实了二维无限频率初至走时层析反演可以为全波形反演提供一个分辨率较高的长波长速度模型,从而为全波形反演井间地震实际资料提供了一个比较可靠的初始速度模型. 相似文献
11.
A combination of magnetotelluric (MT) measurements on the surface and in boreholes (without metal casing) can be expected to enhance resolution and reduce the ambiguity in models of electrical resistivity derived from MT surface measurements alone. In order to quantify potential improvement in inversion models and to aid design of electromagnetic (EM) borehole sensors, we considered two synthetic 2D models containing ore bodies down to 3000 m depth (the first with two dipping conductors in resistive crystalline host rock and the second with three mineralisation zones in a sedimentary succession exhibiting only moderate resistivity contrasts). We computed 2D inversion models from the forward responses based on combinations of surface impedance measurements and borehole measurements such as (1) skin-effect transfer functions relating horizontal magnetic fields at depth to those on the surface, (2) vertical magnetic transfer functions relating vertical magnetic fields at depth to horizontal magnetic fields on the surface and (3) vertical electric transfer functions relating vertical electric fields at depth to horizontal magnetic fields on the surface. Whereas skin-effect transfer functions are sensitive to the resistivity of the background medium and 2D anomalies, the vertical magnetic and electric field transfer functions have the disadvantage that they are comparatively insensitive to the resistivity of the layered background medium. This insensitivity introduces convergence problems in the inversion of data from structures with strong 2D resistivity contrasts. Hence, we adjusted the inversion approach to a three-step procedure, where (1) an initial inversion model is computed from surface impedance measurements, (2) this inversion model from surface impedances is used as the initial model for a joint inversion of surface impedances and skin-effect transfer functions and (3) the joint inversion model derived from the surface impedances and skin-effect transfer functions is used as the initial model for the inversion of the surface impedances, skin-effect transfer functions and vertical magnetic and electric transfer functions. For both synthetic examples, the inversion models resulting from surface and borehole measurements have higher similarity to the true models than models computed exclusively from surface measurements. However, the most prominent improvements were obtained for the first example, in which a deep small-sized ore body is more easily distinguished from a shallow main ore body penetrated by a borehole and the extent of the shadow zone (a conductive artefact) underneath the main conductor is strongly reduced. Formal model error and resolution analysis demonstrated that predominantly the skin-effect transfer functions improve model resolution at depth below the sensors and at distance of \(\sim \) 300–1000 m laterally off a borehole, whereas the vertical electric and magnetic transfer functions improve resolution along the borehole and in its immediate vicinity. Furthermore, we studied the signal levels at depth and provided specifications of borehole magnetic and electric field sensors to be developed in a future project. Our results suggest that three-component SQUID and fluxgate magnetometers should be developed to facilitate borehole MT measurements at signal frequencies above and below 1 Hz, respectively. 相似文献
12.
三维反演是磁测数据定量解释的重要方法,在金属矿勘探中扮演着重要的角色.但是在实际矿区的应用中,传统的磁总场异常反演方法依然存在两个问题：一是地面磁异常反演的深度分辨率较低,深部场源体的成像效果差;二是金属矿中可能包含强剩磁,反演结果可能是完全错误的.尽管前人对上述两个问题分别进行了广泛的研究,但尚未尝试同时解决这两个问题.本文在前人研究的基础上,提出了一种井地磁异常模量联合反演方法,该方法需要的控制参数少,无需加入额外的地质信息,且可用于多场源复杂磁异常的反演,具有较强的适用性.本文方法首先将地面和井中磁异常转化为模量数据,然后利用基于核函数或距离的加权函数将井地模量数据结合起来,使得该方法适用于联合反演.我们利用井地多种异常参量进行反演的模型试验表明,在强剩磁存在时,本文方法的效果优于其他方法,在减少剩磁影响的同时,也改善了深部成像效果,具有良好的应用前景. 相似文献
13.
裂陷盆地基底的起伏表现为非光滑的几何形态,传统的重力反演结果并不能很好地反映这种特点.此外,大多数情况下,重力观测面并不位于盆地上界面,应为单独的起伏观测面,盆地应为上界面和基底组成的双界面模式.基于此,本文研究了起伏观测面上裂陷盆地基底双界面模式二维重力反演方法.研究中假设沉积盆地的沉积层与基底的密度差随深度按双曲线规律变化.将沉积盆地的沉积层剖分成相邻的垂直柱体,其水平尺寸是已知的,顶面与沉积层上界面重合,底面深度代表基底的深度,即为要反演的参数.反演中引入全变差函数作为盆地模型的约束,使得反演结果呈现非光滑形态,符合裂陷盆地基底特征.为减小反演多解性,引入已知深度点作为约束.建立由重力数据拟合、已知深度约束及全变差函数组成的目标函数,采用非线性共轭梯度算法使目标函数最小化.模型试算结果表明该方法可反演裂陷盆地基底起伏,并通过调整正则化参数的值可反演坳陷盆地基底起伏.将该反演方法用于珠江口盆地惠州凹陷和运城-临汾裂陷盆地实际资料处理,其结果较好地反映了裂陷盆地基底起伏特征,为研究盆地构造、油气勘探等提供重要参考. 相似文献
14.
A method to determine the position and magnetization vector of buried objects producing a magnetic anomaly is described. The data used were collected in boreholes. Since the anomaly is due to a number of objects, a ‘stripping’ procedure is employed for finding them, and therefore the process of inversion for finding all objects causing the anomaly consists of a few inversion steps. In each inversion step, two dipoles are considered as a model which approximates an object. The position and magnetic moments of the dipoles are the unknown parameters. The initial parameters are optimized by minimization of an objective function. The optimization procedure consists of a combination of linear and non-linear inversion. The solution of the linear inversion is obtained by singular value decomposition and that of the non-linear inversion by a six-dimensional simplex method (polytope algorithm). After finding one object, its effect is subtracted (‘stripped’) from the data and a new inversion step is started with new initial models and with a reduced data set. The inversion steps for finding different objects are continued until the absolute norm of the data becomes less than some adjustable value. The data will also be inverted assuming a three-dipole model in order to find the effect of using a more complex model in the inversion. The efficiency of the method is demonstrated using synthetic and real borehole data. 相似文献
15.
16.
This paper describes application of a fast inversion method to recover a 3D susceptibility model from magnetic anomalies. For this purpose, the survey area is divided into a large number of rectangular prisms in a mesh with unknown susceptibilities. Solving the full set of equations is substantially time consuming, and applying an algorithm to solve it approximately can reduce the time significantly. It is shown that the Lanczos bidiagonalization method can be an appropriate algorithm to solve a Tikhonov cost function for this purpose. Running time of the inverse modeling significantly decreases by replacing the forward operator matrix with a matrix of lower dimension. A weighted generalized cross validation method is implemented to choose an optimum value of a regularization parameter. To avoid the natural tendency of magnetic structures to concentrate at shallow depth, a depth weighting is applied. This study assumes that there is no remanent magnetization. The method is applied on a noise-corrupted synthetic data to demonstrate its suitability for 3D inversion. A case study including ground based measurement of magnetic anomalies over a porphyry-Cu deposit located in Kerman providence of Iran, Now Chun deposit, is provided to show the performance of the new algorithm on real data. 3D distribution of Cu concentration is used to evaluate the obtained results. The intermediate susceptibility values in the constructed model coincide with the known location of copper mineralization. 相似文献
17.
A fast imaging technique is developed to deduce the spatial conductivity distribution in the earth from low-frequency (> 1 MHz) cross-well electromagnetic measurements. A sinusoidally oscillating, vertically orientated, magnetic dipole employed as a source, and it is assumed that the scattering bodies are azimuthally symmetric about the source dipole axis. The use of this model geometry reduces the 3D vector problem to a more manageable 2D scalar form. Additional efficiency is obtained by using the Born series approximation which is derived from nonlinear integral equations that account for the scattered magnetic fields generated by inhomogeneities embedded in a layered earth. Stabilization of the inversion problem is accomplished through the use of bounding constraints and a regularization method which results in a smooth model that fits the data to the desired noise level. The applicability of cross-well electromagnetics for imaging and monitoring changes caused by subsurface processes has been tested by simulating plumes of conductive fluid with 2D models. The images that result from inverting these synthetic data indicate that the vertical resolution of the method is better than the horizontal, increasing the noise decreases the image resolution, and incorporating a priori knowledge in the form of positivity constraints improves the results. Although higher operating frequencies are usually associated with better resolution, frequencies as low as 100 Hz can produce acceptable images in simulated oilfield environments. The imaging scheme has been applied to data collected during a salt-water injection experiment at the Richmond Field Station test site in Richmond, California. Both the data and the resulting images clearly reveal the presence of the plume and indicate that it is migrating towards the north-northwest rather than spreading symmetrically about the injection well. Applying the imaging code to synthetic data generated by a 3D sheet model verifies the interpretation of these results. 相似文献
18.