首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Abstract— Previous studies of Apollo 17 double-drive tube 79001/2 showed that portions of this lunar regolith segment have some unusual properties, such as very high Is/FeO values (Monis et al., 1989) and N contents (Stone and Clayton, 1989). To understand the geologic significance of these features in this core, we determined the grain-size distribution and modal abundance of the petrographic constituents for samples from 12 different depths of the core. Also, we measured the elemental and isotopic compositions of noble gases in the coarse-grained (150–250 μm) and fine-grained (<20 μm) sample fractions from four depths of this core. The agglutinate abundance and 36Ar contents show depth-related variations similar to those observed for Is/FeO and N in this core. Samples from the top (～0.5 cm depth) and the bottom (～45 cm depth) of the drive tube are related to Apollo 17 submature soils with about 250–300 Ma galactic cosmic-ray (GCR) exposure age. But the soil at the top of the drive tube received additional surface irradiation for ～2 Ma after deposition at Van Serg. The samples at intermediate depths (i.e., ～7 cm (upper zone) and ～20 cm (lower zone) of the 79001/2 core) show features characteristic of mixtures of Apollo 17 mature soils and finely comminuted regolith breccias having about 600–800 Ma GCR exposure age. The mixing ratios between the coarse and fine fractions of the intermediate-depth samples are similar to each other. Though the mixing ratios for the samples from the top and the bottom of the core are also similar to each other, they differ significantly from the ratios at intermediate depths. The results presented here are consistent with the two-component Van Serg core model proposed by Stone and Clayton (1989) and McKay et al. (1988).  相似文献   

2.
We investigate the depth, variability, and history of regolith on asteroid Vesta using data from the Dawn spacecraft. High‐resolution (15–20 m pixel?1) Framing Camera images are used to assess the presence of morphologic indicators of a shallow regolith, including the presence of blocks in crater ejecta, spur‐and‐gully–type features in crater walls, and the retention of small (<300 m) impact craters. Such features reveal that the broad, regional heterogeneities observed on Vesta in terms of albedo and surface composition extend to the physical properties of the upper ~1 km of the surface. Regions of thin regolith are found within the Rheasilvia basin and at equatorial latitudes from ~0–90°E and ~260–360°E. Craters in these areas that appear to excavate material from beneath the regolith have more diogenitic (Rheasilvia, 0–90°E) and cumulate eucrite (260–360°E) compositions. A region of especially thick regolith, where depths generally exceed 1 km, is found from ~100–240°E and corresponds to heavily cratered, low‐albedo surface with a basaltic eucrite composition enriched in carbonaceous chondrite material. The presence of a thick regolith in this area supports the idea that this is an ancient terrain that has accumulated a larger component of exogenic debris. We find evidence for the gardening of crater ejecta toward more howarditic compositions, consistent with regolith mixing being the dominant form of “weathering” on Vesta.  相似文献   

3.
A. Mantz  R. Sullivan  J. Veverka 《Icarus》2004,167(1):197-203
Images of Eros from the NEAR Shoemaker spacecraft reveal bright and dark albedo features on steep crater walls unlike markings previously observed on asteroids. These features have been attributed to the downslope movement of space-weathered regolith, exposing less weathered material (Science 292 (2001) 484; Meteor. Planet. Sci. 36 (2001) 1617; Icarus 155 (2002) 145). Here we present observations of the interiors of large craters (>1 km in diameter) to test this hypothesis and constrain the origin of the features. We find that bright regions in these craters correspond to steep slopes, consistent with previous work. The geographic distribution of craters with albedo variations shows no pattern and does not resemble the distribution of ponds, another phenomenon on Eros attributed to regolith movement. Shadows and other indications of topography are not observed at feature boundaries, implying that the transported layer is ?1 m thick. The presence of multiple bright and dark units on long slopes with sharp boundaries between them suggests that mobilized regolith may be halted by frictional or other effects before reaching the foot of the slope. Features on crater walls should darken at the same rate as bright ejecta deposits from crater formation; the lack of observed, morphologically fresh craters with bright interiors or ejecta suggests that the albedo patterns are younger than the most recently formed craters greater than about 100 m in diameter. Smaller or micrometeorite impacts, which would not necessarily leave evident deposits of bright ejecta, remain possible causes of albedo patterns. Although their effectiveness is difficult to assess, electrostatic processes and thermal creep are also candidates.  相似文献   

4.
We performed the first global survey of lunar regolith depths using Lunar Reconnaissance Orbiter Camera (LROC) data and the crater morphology method for determining regolith depth. We find that on both the lunar farside and in the nearside, non-mare regions, the regolith depth is twice as deep as it is within the lunar maria. Our data compare favorably with previous studies where such data exist. We also find that regolith depth correlates well with density of large craters (>20 km diameter). This result is consistent with the gradual formation of regolith by rock fracture during impact events.  相似文献   

5.
Abstract— The Ilumetsa impact craters were discovered in 1938 in the course of geological mapping. In the crater field area, the Middle Devonian bedrock consists of light‐yellow weakly cemented siltstones and sandstones of the Givetian Burtnieki Regional Stage, which are overlain by a 1–2 m thick layer of reddish‐brown loamy till. Põrguhaud, the biggest crater, has a diameter of 75–80 m at the top of the uplifted rim and is 12.5 m deep. The zone of authochtonous breccias below the apparent crater extends to 30 m deep. The crater is partly filled with a thin layer of gyttja and peat up to 2 m thick. Radiocarbon ages of 6030 ± 100 (TA‐310) and 5910 ± 100 (TA‐725) years B.P. from the lowermost organic layer and palynological evidence suggest that the age of the impact was ～6000 14C years B.P. The Sügavhaud crater has a diameter of 50 m at the top of the rim and is 4.5 m deep. Organic matter on the bottom of the crater is absent. As precise age determination of the Ilumetsa craters by direct dating methods has proved inconclusive, we proposed a method of geological correlation which is based on the occurrence of impact spherules in lake and bog sediments around the crater field. Radiocarbon dating of samples from a peat layer with glassy spherules of impact origin in the Meenikunno Bog, 6 km southwest of the Ilumetsa crater field, yielded the ages of 6542 ± 50 (Tln‐2214) for the depth interval 5.6–5.7 m and 6697 ± 50 (Tln‐2316) years B.P. for the depth interval 5.7–5.8 m. These dates suggest that the Ilumetsa craters were formed ～6600 years ago.  相似文献   

6.
Abstract— The global high‐resolution imaging of asteroid 433 Eros by the Near‐Earth Asteroid Rendezvous (NEAR) Shoemaker spacecraft has made it possible to develop the first comprehensive picture of the geology of a small S‐type asteroid. Eros displays a variety of surface features, and evidence of a substantial regolith. Large scale facets, grooves, and ridges indicate the presence of at least one global planar structure. Directional and superposition relations of smaller structural features suggest that fracturing has occurred throughout the object. As with other small objects, impact craters dominate the overall shape as well as the small‐scale topography of Eros. Depth/diameter ratios of craters on Eros average ～0.13, but the freshest craters approach lunar values of ～0.2. Ejecta block production from craters is highly variable; the majority of large blocks appear to have originated from one 7.6 km crater (Shoemaker). The interior morphology of craters does not reveal the influence of discrete mechanical boundaries at depth in the manner of craters formed on lunar mare regolith and on some parts of Phobos. This lack of mechanical boundaries, and the abundant evidence of regolith in nearly every high‐resolution image, suggests a gradation in the porosity and fracturing with depth. The density of small craters is deficient at sizes below ～200 m relative to predicted slopes of empirical saturation. This characteristic, which is also found on parts of Phobos and lunar highland areas, probably results from the efficient obliteration of small craters on a body with significant topographic slopes and a thick regolith. Eros displays a variety of regolith features, such as debris aprons, fine‐grained “ponded” deposits, talus cones, and bright and dark streamers on steep slopes indicative of efficient downslope movement of regolith. These processes serve to mix materials in the upper loose fragmental portion of the asteroid (regolith). In the instance of “ponded” materials and crater wall deposits, there is evidence of processes that segregate finer materials into discrete deposits. The NEAR observations have shown us that surface processes on small asteroids can be very complex and result in a wide variety of morphologic features and landforms that today seem exotic. Future missions to comets and asteroids will surely reveal still as yet unseen processes as well as give context to those discovered by the NEAR Shoemaker spacecraft.  相似文献   

7.
Abstract— This paper develops a methodology to establish absolute Martian ages by deriving isochrons on a plot of Martian impact crater density vs. crater diameter, calibrated by lunar crater/age data. The isochrons illustrated here are based on a Mars/Moon cratering ratio of 1.6 at constant size, but there is a factor of 2 to 4 uncertainty in this ratio and the consequent model ages. Martian crater diameter distributions are determined in several areas down to diameter D = 16–45 m; the shapes of the curves in young areas are found to be close to that of the predicted isochrons and close to the standard production function found by Neukum. The youngest areas studied here display the lunar-like production function down to D ～30 m, where saturation equilibrium sets in. Model crater retention ages of several volcanic units are found to be a few hundred million years or less, with estimated uncertainties ranging from a factor of 2 lower to a factor of 4 higher. The results are consistent with Martian meteorite ages. Volcanism on Mars has probably persisted into the last 10 to 15% of the planet's history and is likely ongoing. Because surfaces as young as a few hundred million years have reached crater saturation equilibrium at D < ～60 to 100 m, Mars is likely to have widespread impact-produced regoliths at least a few meters deep, and this may contribute to the widespread mobile dust and boulder fields of Mars.  相似文献   

8.
Abstract— Given that the Earth's surface is covered in around two‐thirds water, the majority of impact events should have occurred in marine environments. However, with the presence of a water layer, crater formation may be prohibited. Indeed, formation is greatly controlled by the water depth to projectile diameter ratio, as discussed in this paper. Previous work has shown that the underlying target material also influences crater formation (e.g., Gault and Sonett 1982; Baldwin et al. 2007). In addition to the above parameters we also show the influence of impact angle, impact velocity and projectile density for a variety of water depths on crater formation and projectile survivability. The limiting ratio of water depth to projectile diameter on cratering represents the point at which the projectile is significantly slowed by transit through the water layer to reduce the impact energy to that which prohibits cratering. We therefore study the velocity decay produced by a water layer using laboratory, analytical and numerical modelling techniques, and determine the peak pressures endured by the projectile. For an impact into a water depth five times the projectile diameter, the velocity of the projectile is found to be reduced to 26–32% its original value. For deep water impacts we find that up to 60% of the original mass of the projectile survives in an oblique impact, where survivability is defined as the solid or melted mass fraction of the projectile that could be collected after impact.  相似文献   

9.
Geology and stratigraphy of King crater, lunar farside   总被引：1，自引：0，他引：1  
Clementine and photographic data sets have been used to investigate the crustal stratigraphy and geology of King crater on the lunar farside (120°E, 5.5°N). Pre-existing topographic regimes or stress fields dominate many structures in the crater, which has excavated materials from depths of up to 14 km. The upper crust in the area is noritic anorthosite, grading to a more anorthositic signature with depth. A possible batholithic intrusion is also present in a 15-km-wide band, extending from the southern crater floor to at least 50 km north of King, and from near-surface levels down to at least the excavation depth of the crater. It is generally feldspathic, but is cut by mafic dykes now visible in the north wall. King also shows evidence for the presence of a cryptomare, exposed in regions of the peaks and in dark halo craters within the ejecta blanket. Localized olivine-bearing mineralogies are observed on the central peaks, suggesting isolated pockets of troctolitic mineralogies to have been present at 8- to 14-km depths. Copious volumes of crystalline melt produced from the impact event cover King’s floor to a maximum thickness of 30-60 m, and have pooled in a number of natural depressions outside of the main crater. The main pool in the pre-existing A1-Tusi crater has a minimum depth of 150 m. Domes on the crater floor are verified as nonvolcanic in origin, and did not act as a source for any of the lava-like materials in King.  相似文献   

10.
The newly discovered Ritland impact structure (2.7?km in diameter) has been modeled by numerical simulation, based on detailed field information input. The numerical model applies the SOVA multi-material hydrocode, which uses the ANEOS equation of state for granite, describing thermodynamical properties of target and projectile material. The model displays crater formation and possible ejecta distribution that strongly supports a 100?m or less water depth at the time of impact. According to the simulations resurge processes and basinal syn- and postimpact sedimentation are highly dependent on water depth; in more than 100?m of water depth, much more powerful resurge processes are generated than at water depths shallower than 100?m (the Ritland case). In Ritland the 100?m high (modeled) crater rim formed a barrier and severely reduced the resurge processes. In the case of deeper water, powerful resurge processes, tsunami wave generations and related currents could have triggered even more violent crater fill sedimentation. The presented model demonstrates the importance of understanding the interactions between water layer and both syn-impact crater fill and ejecta distribution. According to the presented simulations ejecta blocks up to 10?m in diameter could be transported up to about 5?km outside the crater rim.  相似文献   

11.
Distributions of boulders ejected from lunar craters   总被引：1，自引：0，他引：1  
We investigate the spatial distributions of boulders ejected from 18 lunar impact craters that are hundreds of meters in diameter. To accomplish this goal, we measured the diameters of 13,955 ejected boulders and the distance of each boulder from the crater center. Using the boulder distances, we calculated ejection velocities for the boulders. We compare these data with previously published data on larger craters and use this information to determine how boulder ejection velocity scales with crater diameter. We also measured regolith depths in the areas surrounding many of the craters, for comparison with the boulder distributions. These results contribute to understanding boulder ejection velocities, to determining whether there is a relationship between the quantity of ejected boulders and lunar regolith depths, and to understanding the distributions of secondary craters in the Solar System. Understanding distributions of blocky ejecta is an important consideration for landing site selection on both the Moon and Mars.  相似文献   

12.
Because of the ubiquity of subsurface microbial life on Earth, examination of the subsurface of Mars could provide an answer to the question of whether microorganisms exist or ever existed on that planet. Impact craters provide a natural mechanism for accessing the deep substrate of Mars and exploring its exobiological potential. Based on equations that relate impact crater diameters to excavation depth we estimate the observed crater diameters that are required to prospect to given depths in the martian subsurface and we relate these depths to observed microbiological phenomena in the terrestrial subsurface. Simple craters can be used to examine material to a depth of ∼270 m. Complex craters can be used to reach greater depths, with craters of diameters ≥300 km required to reach depths of 6 km or greater, which represent the limit of the terrestrial deep subsurface biosphere. Examination of the ejecta blankets of craters between 17.5 and 260 km in diameter would provide insights into whether there is an extant, or whether there is evidence of an extinct, deep subsurface microbiota between 500 and 5000 m prior to committing to large-scale drilling efforts. At depths <500 m some crater excavations are likely to be more important than others from an exobiological point of view. We discuss examples of impacts into putative intracrater paleolacustrine sediments and regions associated with hydrothermal activity. We compare these depths to the characteristics of subsurface life on Earth and the fossil microbiological record in terrestrial impact craters.  相似文献   

13.
J. Burt  J. Veverka  K. Cook 《Icarus》1976,29(1):83-90
We have determined the depth/diameter ratio for 87 craters on Mars using Mariner 9 UVS spectrometer altimetry (Barth et al., 1974). Our sample includes craters 12 to 100 km in diameter, and 0.4 to 3.3 km in depth. The largest depth/diameter ratios on Mars are comparable to those of fresh craters on Mercury (measured by Gault et al., 1975). However, more than half of our sample consists of degraded craters whose depths are significantly shallower than those of fresh craters of similar diameter on Mercury, confirming the interpretations of earlier photoanalysts.  相似文献   

14.
We use multispectral reflectance data from the lunar Clementine mission to investigate the impact ejecta deposits of simple craters in two separate lunar mare basalt regions, one in Oceanus Procellarum and one in Mare Serenitatis. Over 100 impact craters are studied, and for a number of these we observe differences between the TiO2 (and FeO) contents of their ejecta deposits and the lava flow units in which they are located. We demonstrate that, in the majority of cases, these differences cannot plausibly be attributed to uncorrected maturity effects. These observations, coupled with morphometric crater relationships that provide maximum crater excavation depths, allow the investigation of sub-surface lava flow stratigraphy. We provide estimated average thicknesses for a number of lava flow units in the two study regions, ranging from ∼80 m to ∼600 m. In the case of the Serenitatis study area, our results are consistent with the presence of sub-surface horizons inferred from recent radar sounding measurements from the JAXA Kaguya spacecraft. The average lava flow thicknesses we obtain are used to make estimates of the average flux of volcanic material in these regions. These are in broad agreement with previous studies, suggesting that the variation in mare basalt types we observe with depth is similar to the lateral variations identified at the surface.  相似文献   

15.
Although researchers in the last decade have been primarily concerned with the exotic findings of the more distant planets and moons in our solar system, as given by the Voyager series, there is still much work to be done on our nearer neighbours, including the Moon. This paper summarizes some basic age dating of a portion of the lunar surface, namely the mare in the crater Tsiolkovsky on the lunar far side.Using the Apollo 15 panoramic camera photographs, the cumulative crater frequency (N km-2) relative to crater diameter (D) distribution has been obtained for the mare in the crater Tsiolkovsky. The diameter size range sampled was 0.07 km < D < 1 km. A total of 12 604 craters were counted and their average apparent diameters measured. There were 85 sample areas on the mare surface which were chosen at random, after exclusion of blanketed, volcanic or secondary cratered areas. It was found that a large proportion of the crater floor contains endogenic features, especially volcanic vents at approximately D = 0.3 km. An additional 7 areas of interest were also examined in detail for comparison with areas of purely primary impact craters. Evidence for up to 8 lava floodings can be detected from the size-frequency distributions although no visual data, e.g., flow lobes, can be seen on the mare surface.The total size-frequency distribution for all the areas is coincident with Neukum et al. (1975a and b) Calibration Distribution in the size range 0.25 km < D < 1 km which is at the smallest crater diameters that they obtained. Neukum et al. (1975a and b) give their distribution as a polynomial of 7th degree. However, in this present study a variation is indicated in the steepening of the curve for D < 0.1 km.The results also approximate (but only for D < 0.6 km) the distribution obtained by Shoemaker et al. (1970) in the range 100 m < D < 3 km where N ~ D -2.9. The best fit line reached for the data given here is N ~ D -2.682.Comparison of the distribution with plots for the maria at Apollo 11, 12, and 15 landing sites show that Tsiolkovsky mare is 3.51 ± 0.1 × 109 yr old. This agrees with other workers (see Gornitz, 1973) who place it between Mare Tranquillitatis (Apollo 11 radiometric dating: 3.5 to 3.9 aeons) and Oceanus Procellarum (Apollo 12: 3.5 to 3.4 aeons). There are no rock samples from Tsiolkovsky to given an absolute age.This places Tsiolkovsky mare within the weighted mean of the age range (1.0 to 4.3 × 109 yr old) of the maria on the Moon. From this it can be concluded that the processes producing the vast basalt outpourings seen on the Moon's face apply for the far side also and that there is a linking factor for the whole Moon.  相似文献   

16.
Abstract— We are testing the idea of Squyres et al. (1992) that rampart craters on Mars may have formed over a significant time period and therefore the onset diameter (minimum diameter of a rampart crater) only reflects the ground ice depth at a given time. We measured crater size frequencies on the layered ejecta of rampart craters in three equatorial regions to derive absolute model ages and to constrain the regional volatile history. Nearly all rampart craters in the Xanthe Terra region are ?3.8 Gyr old. This corresponds to the Noachian fluvial activity that region. Rampart crater formation declines in the Hesperian, whereas onset diameters (minimum diameter) increase. No new rampart craters formed after the end of the Hesperian (?3 Gyr). This indicates a lowering of the ground ice table with time in the Xanthe Terra region. Most rampart craters in the Valles Marineris region are around 3.6 Gyr old. Only one large, probably Amazonian‐aged (?2.5 Gyr), rampart crater exists. These ages indicate a volatile‐rich period in the Early Hesperian and a lowering of the ground ice table with time in the Valles Marineris study region. Rampart craters in southern Chryse Planitia, which are partly eroded by fluvial activity, show ages around 3.9 Gyr. Rampart craters superposed on channels have ages between ?1.5 and ?0.6 Gyr. The onset diameter (3 km at ?1.5 Gyr) in this region may indicate a relatively shallow ground ice table. Loss of volatiles due to diffusion and sublimation might have lowered the ground ice table even in the southern Chryse Planitia region afterwards. In general, our study implies a formation of the smallest rampart craters within and/or shortly after periods of fluvial activity and a subsequent lowering of the ground ice table indicated by increasing onset diameter to the present. These results question the method to derive present equatorial ground ice depths from the onset diameter of rampart craters without information about their formation time.  相似文献   

17.
Abstract— The Sirente crater field consists of a 120 m wide, rimmed main depression flanked to the northwest by about 30 smaller depressions. It has been dated to the first centuries A.D. An impact origin is suggested, but not confirmed. The small size combined with the properties of the target material (carbonate mud) would neither allow shock features diagnostic of impact, nor projectile vaporization. Consequently, a meteoritic component in the sediments would be very localized. At impacts of this size the projectile most likely is an iron meteorite. Any iron meteorites on the ground surface would, in Iron Age Europe, have been removed shortly after the event. However, if the depressions are of impact origin they should contain meteorites at great depth in analogy with known craters. The magnetic properties of iron meteorites differ distinctly from the very low magnetic sediments and sedimentary rocks of the Sirente area. We have used a proton precession magnetometer/gradiometer to produce magnetic anomaly maps over four of the smaller depressions (～8 m diameter), as well as two crossing profiles over a fifth depression (～22 m diameter). All show distinct magnetic anomalies of about 20 nT, the larger depression up to 100 nT. Magnetic modeling shows a best fit for structures with upturned strata below their rims, excluding a karstic origin but supporting an explosive formation. The 100 nT anomaly can only be explained by highly‐magnetic objects at a few meters depth. All together, the magnetic data provides a strong indication for an impact origin of the crater field.  相似文献   

18.
Lunar irregular mare patches (IMPs) comprise dozens of small, distinctive, and enigmatic lunar mare features. Characterized by their irregular shapes, well-preserved state of relief, apparent optical immaturity, and few superposed impact craters, IMPs are interpreted to have been formed or modified geologically very recently (<~100 Ma; Braden et al. 2014 ). However, their apparent relatively recent formation/modification dates and emplacement mechanisms are debated. We focus in detail on one of the major IMPs, Sosigenes, located in western Mare Tranquillitatis, and dated by Braden et al. ( 2014 ) at ~18 Ma. The Sosigenes IMP occurs on the floor of an elongate pit crater interpreted to represent the surface manifestation of magmatic dike propagation from the lunar mantle during the mare basalt emplacement era billions of years ago. The floor of the pit crater is characterized by three morphologic units typical of several other IMPs, i.e., (1) bulbous mounds 5–10 m higher than the adjacent floor units, with unusually young crater retention ages, meters thick regolith, and slightly smaller subresolution roughness than typical mature lunar regolith; (2) a lower hummocky unit mantled by a very thin regolith and significantly smaller subresolution roughness; and (3) a lower blocky unit composed of fresh boulder fields with individual meter-scale boulders and rough subresolution surface texture. Using new volcanological interpretations for the ascent and eruption of magma in dikes, and dike degassing and extrusion behavior in the final stages of dike closure, we interpret the three units to be related to the late-stage behavior of an ancient dike emplacement event. Following the initial dike emplacement and collapse of the pit crater, the floor of the pit crater was flooded by the latest-stage magma. The low rise rate of the magma in the terminal stages of the dike emplacement event favored flooding of the pit crater floor to form a lava lake, and CO gas bubble coalescence initiated a strombolian phase disrupting the cooling lava lake surface. This phase produced a very rough and highly porous (with both vesicularity and macroporosity) lava lake surface as the lake surface cooled. In the terminal stage of the eruption, dike closure with no addition of magma from depth caused the last magma reaching shallow levels to produce viscous magmatic foam due to H2O gas exsolution. This magmatic foam was extruded through cracks in the lava lake crust to produce the bulbous mounds. We interpret all of these activities to have taken place in the terminal stages of the dike emplacement event billions of years ago. We attribute the unusual physical properties of the mounds and floor units (anomalously young ages, unusual morphology, relative immaturity, and blockiness) to be due to the unusual physical properties of the substrate produced during the waning stages of a dike emplacement event in a pit crater. The unique physical properties of the mounds (magmatic foams) and hummocky units (small vesicles and large void space) altered the nature of subsequent impact cratering, regolith development, and landscape evolution, inhibiting the typical formation and evolution of superposed impact craters, and maintaining the morphologic crispness and optical immaturity. Accounting for the effects of the reduced diameter of craters formed in magmatic foams results in a shift of the crater size–frequency distribution age from <100 Myr to billions of years, contemporaneous with the surrounding ancient mare basalts. We conclude that extremely young mare basalt eruptions, and resulting modification of lunar thermal evolution models to account for the apparent young ages of the IMPs, are not required. We suggest that other IMP occurrences, both those associated with pit craters atop dikes and those linked to fissure eruptions in the lunar maria, may have had similar ancient origins.  相似文献   

19.
In this paper, we shall analyse a promising way to explain the huge crater asymmetry observed on Triton, the largest of Neptune's satellites. Triton shows, as well as many other satellites in the Solar System, a non-symmetric crater distribution on its surface. This fact is principally due to the synchronous rotation of these satellites, as shown by many theoretical works (see Shoemaker and Wolfe, Satellites of Jupiter, University of Arizona Press, Tucson, 1992, p. 277; Horedt and Neukum, Icarus 60 (1984) 710; Zahnle et al., Icarus 136 (1998) 202; Zahnle et al., Icarus 153 (2001) 111). However, on Triton the asymmetry is much more pronounced than on other satellites, and it exceeds what the models, in which the source of the craters are bodies in heliocentric orbits, can account for. For this reason, many authors (Croft et al., Icarus 99 (1992) 94; Schenk and Sobieszczyk, American Astronomical Society, DPS Meeting, Vol. 31, 1999; Zahnle et al., Icarus 153 (2001) 111) proposed that the origin for Triton's asymmetry has to be found in a swarm of bodies having planetocentric orbits, instead of heliocentric ones. Here, we analyse from a dynamical point of view the possibility that such swarm of fragments was generated by a collision between an inner satellite and a third object (a process we call ‘mass transfer’). Moreover, we discuss the possibility that the observed crater distribution on Triton comes from two populations: heliocentric bodies responsible for a few big craters, plus planetocentric bodies responsible for the big asymmetry.Finally, we discuss some implications for ground observations.  相似文献   

20.
To understand the process of cosmic dust particle impacts and translate crater morphology on smoothed metallic surfaces to dust properties, correct calibration of the experimental impact data is needed. This article presents the results of studies of crater morphology generated by impacts using micron‐sized polypyrrole (PPy)‐coated olivine particles. The particles were accelerated by an electrostatic dust accelerator to high speeds before they impacted onto polished aluminum targets. The projectile diameter and velocity ranges were 0.3–1.2 μm and 3–7 km s?1. After impact, stereopair images of the craters were taken using scanning electron microscope and 3‐D reconstructions made to provide diameter and depth measurements. In this study, not just the dimensions of crater diameters and depths, but also the shape and dimensions of crater lips were analyzed. The craters created by the coated olivine projectiles are shown to have complicated shapes believed to be due to the nonspherical shape of the projectiles.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号