首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The Pollino Range area represents the mostprominent gap in seismicity within thesouthern Apennines. Geomorphic andtrenching investigations along theCastrovillari fault indicate that thisnormal fault is a major seismogenic faultwithin the southern part of this gap. Atleast four surface-faulting earthquakeshave occurred on this fault since latePleistocene age. Radiocarbon dating coupledwith historical consideration set thetime of the most recent earthquake as mostlikely to be between 530 A.D. and 900 A.D.,with the possible widest interval of530–1100 A.D. No evidence for this eventhas been found in the historical records,although its age interval falls within thetime spanned by the seismic catalogues.Slip per event ranges between 0.5 and1.6 m, with a minimum rupture length of13 km. These values suggest a M 6.5–7.0 forthe paleoearthquakes. The minimum long-termvertical slip rate obtained from displacedgeomorphic features is of 0.2–0.5 mm/yr. Avertical slip-rate of about 1 mm/yr is alsoinferred from trenching data. Theinter-event interval obtained from trenchdata ranges between 940 and 7760 years(with the young part of the intervalpossibly more representative; roughly940–3000 years). The time elapsed since themost recent earthquake ranges between aminimum of 900–1100 and a maximum of 1470years. The seismic behavior of this faultappears to be consistent with that of othermajor seismogenic faults of thecentral-southern Apennines. The Pollinocase highlights the fact thatgeological investigations represent apotentially useful technique tocharacterize the seismic hazard of `silent' areas for which adequate historical andseismological data record are notavailable.  相似文献   

2.
Paleoseismology, the study of past earthquakes based on their geological record in the stratigraphy and landscape, is a successful newly developing field of research. The application of fault trench studies in volcanic environments is one of the youngest branches of paleoseismology. In this paper, we present the results of the first exploratory trenches excavated at Mt. Etna in Sicily, the largest European volcano. Modern surface faulting at Etna is a very well known feature, which poses significant hazard to the local community, both in terms of ground displacement of essential lifelines and ground shacking from frequent damaging earthquakes. However, while the geomorphology and the seismicity of the active fault in the Etna region consistently show very high rates of tectonic activity, the Holocene cumulative throw and slip-rates, along with the nature (coseismic vs. creeping fault slip), dimension and timing of the displacement events, are still poorly constrained. For this purpose, we selected as a sample area the Moscarello fault, one of the most outstanding segment of the Timpe system of active normal faults in the volcano’s lower eastern flank. Displaced landforms and volcanic units at the Fondo Macchia basin, in the central sector of this fault, indicate some hundreds of meters of vertical offset in the last ca. 80 kyr, with a long-term slip-rate substantially higher than 1.5–2.0 mm/yr. According to the historical sources and instrumental observations, the Moscarello fault ruptured four times in the last 150 years during shallow (H < 5 km) and moderate magnitude (M < 4.8) earthquakes. These events were associated with severe damage in a narrow epicentral area (macroseismic intensities up to the IX–X grade of the MSK scale) and extensive surface faulting (end-to-end rupture length up to 6 km, vertical offsets up to 90 cm). This clearly indicates very high modern rates of deformation along this fault. We conducted trench investigations at the Fondo Macchia site, in a point where eyewitnesses observed ca. 20 cm of coseismic vertical displacement after the April 21, 1971, Ms=3.7, earthquake. The excavated sections provided direct stratigraphic evidence for a vertical slip-rate of 1.4–2.7 mm/yr in the last ca. 6 kyr. This should be regarded as a minimum slip-rate for the central section of the fault. We explored a single scarp at a single site, while we know from recent historical observations that several parallel scarps may rupture coseismically at Fondo Macchia. Thus, the relevant deformation rate documented for the modern period might be likely extended back in the past to a time-span of some thousands of years at least. As expected, for such a volcanic environment, the activity rates of the Moscarello fault are also significantly higher than for the Apennines normal faults, typically showing slip-rates lower than 1 mm/yr. The agriculturally reworked trench hangingwall stratigraphy did not allow to recognize individual displacement events. Nevertheless, the sedimentary structures observed in the trench footwall strongly suggest that, as for the last 150–200 years of detailed historical record, fault behavior at Fondo Macchia is governed by coseismic surface displacement rather than fault creep. This research confirms that paleoseismology techniques can be effectively applied also in active volcanic environments, typically characterized by rheology and, consequently, seismicity and fault dynamics very different from those of other tectonic environments in which paleoseismology has been firstly developed and is today extensively applied.  相似文献   

3.
  相似文献   

4.
  相似文献   

5.
Geomorphic and trench investigations are used toanalyze the seismic potential of the Aremogna-CinqueMiglia fault, an active N- to NW-trending, W-facingnormal fault located in Central Apennines. Wereconstructed a complex 16 km-long, as much as 6m-high, fault scarp that displaces late Holocenesediments in the Aremogna and Cinque Miglia basins.The complex surface expression of the fault, withdouble sub-parallel scarp sections, a change in strikeof about 40° and local complexity showingimportant horizontal component, appears to becontrolled by the presence of older tectoniclineaments. We opened two trenches across the faultscarp, used a quarry exposure, and reinterpreted atrench opened by Frezzotti and Giraudi (1989), to findthe geological evidence for three Holocene surfacefaulting earthquakes on the Aremogna-Cinque Migliafault. Based on radiocarbon dating and stratigraphicand climatic considerations timing of the events isconstrained between 800 B.C. and 1030 A.D., between3735 and 2940 B.C., and between 3540 and 5000 B.C.. The most recent event is not reported in the twomillennia-long Italian Catalogues of HistoricalSeismicity. We suggest that the most recent eventcould be one of the Middle Age earthquakes of unknownorigin for which several felt reports exist in Rome.Moreover, we also consider the hypothesis that one ofthe shocks of the ambiguous September 1349 earthquakesequence could be the Aremogna-Cinque Miglia mostrecent event. Anyway, based on historicalconsideration we indicate A.D. 1349 as the youngestpossible age for this event. Finally, we suggest theAremogna-Cinque Miglia fault is part of the easternsecondary Apennines seismogenic belt. The faultparameters we obtain for this fault (i.e., recurrence interval longer than 2000 yr, verticallong-term slip rate of 0.3–0.5 mm/yr and m 6.5–6.8 forthe event) can be used as a first hand reference tocharacterize the seismic behavior of other faultsalong this section of the Apennines.  相似文献   

6.
对历史记载的公元1738年玉树西北地震的震级及其发震构造目前仍存有争议。卫星影像解译和野外调查发现沿甘孜-玉树断裂当江段分布一条长约75km的左旋走滑地震地表破裂带,其最大同震水平位移约2.1m。综合分析该地表破裂带特征、探槽揭露信息、测年结果以及历史文献记载等资料,认为当江段应为1738年玉树西北地震的发震断层,基于震例类比和经验公式估算该次地震的震级为71/2级。沿甘孜-玉树断裂的历史地震破裂分布显示,玉树段在隆宝镇以西存在近50km长的破裂空段;当江段距1738年地震的离逝时间也可能已经接近其地震复发周期,上述两个段落未来均存在大震危险。  相似文献   

7.
A first tentative comparison between the structural framework related to the active tectonics and the long-term seismicity of the Umbria–Marche Apennines (affected by the 1997 seismic sequence) has provided some insight for discussing the seismotectonic characteristics of the area. This Apennine sector is affected by 15 to 20-km-long active fault systems, consisting of minor fault-segments. Each of these fault-segments may be responsible for earthquakes characterised by magnitudes ranging between 5.5 and 6.0 (such as those occurred in 1599, 1730, 1838, 1859, 1979). However, the occurrence of one large-magnitude event (1703, Ms = 6.7) and of seismic sequences (1747–1751; 1997–1998) indicate that an entire fault system may be activated suddenly (at least in the southern part of the investigated area) or during seismic crises which may last many months. The comparison between the active faulting framework and the long-term seismicity also indicates that no significant earthquakes may be related to the Mt. Vettore Fault System since 1000 AD.  相似文献   

8.
The Guadalentín Depression, located in SE Spain (Murcia Region), is bounded by two of the main NE-SW master faults of the Eastern Betics Cordilleras: The Lorca-Alhama and the Palomares left-lateral strike-slip faults. Available earthquake data indicate that, in the last 600 years, some sectors of the Lorca-Alhama Fault and the entire sector of the Palomares Fault have not been associated with significant historical seismicity. However, they show a wide range of diagnostic features of earthquake surface displacements on late Pleistocene and Holocene alluvial and colluvial surfaces. Aside from the left-lateral offsets recorded along 045–050 ° master fault strands of the Lorca-Alhama Fault, major paleoseismic surface displacements show different kinematics in relation to the broad orientation of the fault strands: (1) vertical normal displacements along 010–020 ° trending faults mainly preserved as degraded fault scarps of 2.5-1.8 m high (Aljibejo site); and (2) vertical reverse displacements, with average offsets of 0.2 – 1 m, along 065–080 ° subsidiary faults. In this last group, the younger one (Carraclaca Baths site) remains as a fault scarp of 0.8 m height affecting a cascade tufa which was active until the Spanish Roman Period (2nd Century B.C. to 6th Century A.D.). In other cases, reverse offsets resulted in smaller displacements (0.26 m) of paleosols, but show a recurrent behaviour (La Escarihuela site). The strongest earthquakes recorded in the study area did not exceed more than Mb 4.5 or MSK Intensity VIII (historical) with no evidence of coseismic rupture. Therefore, the preliminary data presented here seem to indicate that the paleoseismic activity on both faults is capable of producing coseismic surface displacements, probably reaching magnitudes of at least 6.5. These data show that paleoseismic studies based on geomorphological analyses are a useful tool in the assessment of the relative degree of activity of apparently ‘aseismic’ fault traces.  相似文献   

9.
The NE-trending Hinagu fault zone, length 81 km, is one of the major active faults in Kyushu, Japan. From north to south, it is divided into three segments based on geomorphic features and paleoseismic behavior: the Takano-Shirahata, Hinagu, and Yatsushiro Sea segments. The 2016 Kumamoto earthquake produced a 6-km-long surface rupture with a dextral strike-slip displacement on the northern part of the Takano-Shirahata segment. Surface rupture, a faint east-side-up flexure with a vertical offset of less than 8 cm, was observed near the middle of the Takano-Shirahata segment. To examine past surface-rupturing earthquakes on the Takano-Shirahata segment, including rupture frequency and timing, we conducted a paleoseismic study with boring and trenching at Yamaide. A trench across the surface rupture exposed multiple fault strands associated with multiple surface-rupturing events that deformed several strata of fine-grained sediments. By structural and stratigraphic interpretation, high-density radiocarbon dating and tephra analysis, and Bayesian modeling, we constrained the timing of seven events, Events 1–7, to 0.84–1.25, 1.31–7.06, 9.99–11.0, 10.8–12.1, 12.0–13.0, 14.2–15.1, and before 14.8 kcal BP. Slip during Events 1–6 was obviously larger than the 2016 slip. The estimated average recurrence interval was about 2596–2860 years, but the interval between Events 2 and 3 was much longer than other intervals. Moreover, the vertical throw associated with Event 2 was larger than that of other events. This implies that the Takano-Shirahata segment has a period with rare larger earthquakes and a period with frequent smaller earthquakes. Some events might have produced ruptures on both the Takano-Shirahata and the northern part of the Hinagu segments simultaneously or in a short time. The variety of recurrence intervals suggests that the seismic activity has been affected by one or both activities of the Futagawa fault zone and the Hinagu segment.  相似文献   

10.
The NE-trending Xinyi-Lianjiang fault zone is a tectonic belt, located in the interior of the Yunkai uplift in the west of Guangdong Province, clamping the Lianjiang synclinorium and consisting of the eastern branch and the western branch. The southwestern segment of the eastern branch of Xinyi-Lianjiang fault zone, about 34km long, extends from the north of Guanqiao, through Lianjiang, to the north of Hengshan. However, it is still unclear about whether the segment extends to Jiuzhoujiang alluvial plain or not, which is in the southwest of Hengshan. If it does, what is about its fault activity? According to ‘Catalogue of the Modern Earthquakes of China’, two moderately strong earthquakes with magnitude 6.0 and 6.5 struck the Lianjiang region in 1605 AD. So it is necessary to acquire the knowledge about the activity of the segment fault, which is probably the corresponding seismogenic structure of the two destructive earthquakes. And the study on the fault activity of the segment can boost the research on seismotectonics of moderately strong earthquakes in Southeast China. In order to obtain the understanding of the existence of the buried fault of the southwestern segment, shallow seismic exploration profiles and composite borehole sections have been conducted. The results indicate its existence. Two shallow seismic exploration profiles show that buried depth of the upper breakpoints and vertical throw of the buried fault are 60m and 4~7m(L5-1 and L5-2 segment, the Hengshan section), 85m and 5~8m(L5-3 segment), 73m and 3~5m(Tiantouzai section), respectively and all of them suggest the buried fault has offset the base of the Quaternary strata. Two composite borehole sections reveal that the depth of the upper breakpoints and vertical throws of the buried segment are about 66m and 7.5m(Hengshan section) and 75m and 5m(Tiantouzai section), respectively. The drilling geological section in Hengshan reveals that the width of the fault could be up to 27m. Chronology data of Quaternary strata in the two drilling sections, obtained by means of electron spin resonance(ESR), suggest that the latest activity age of the buried fault of the southwestern segment is from late of early Pleistocene(Tiantouzai section) to early stage of middle Pleistocene(Hengshan section). Slip rates, obtained by Hengshan section and Tiantouzai section, are 0.1mm/a and 0.013mm/a, respectively. As shown by the fault profile located in a bedrock exposed region in Shajing, there are at least two stages of fault gouge and near-horizontal striation on the fault surface, indicating that the latest activity of the southwestern segment is characterized by strike-slip movement. Chronology data suggest that the age of the gouge formed in the later stage is(348±49) ka.  相似文献   

11.
We present a new seismic velocity model for the southern Apennines–Calabrian Arc border region with the aim to better define the crustal structures at the northern edge of the Ionian subduction zone. This sector also includes the Pollino Mts. area, where a seismic sequence of thousands of small to moderate earthquakes has been recorded between spring 2010 and 2013. In this sector a seismic gap was previously hypothesized by paleoseismological evidences associated with the lack of major earthquakes in historical catalogs.To perform the tomographic inversion we selected ca. 3600 earthquakes that have occurred in the last thirty years and recorded by permanent and temporary networks managed by INGV and Calabria University. Using for the first time the Local Tomography Software for passive tomography inversion (LOTOS hereinafter) to crustal analysis in southern Italy, we have computed the distribution of Vp, Vs, and the Vp/Vs ratio. The obtained velocity model, jointly evaluated with results of synthetic modeling, as well as with the hypocenter distribution and geological information, gives us new constraints on the geodynamical and structural knowledge of the study area.The comparison between the shallow tomography sections and surface geology shows good correlation between velocity patterns and the main geological features of the study area. In the upper crust a low-velocity anomaly of P- and S-waves is detectable beneath the Pollino Mts. area and seems to separate the Calabrian and southern Apennines domains, characterized by higher velocities. The distributions of high Vp/Vs ratio, representing strongly fractured rocks with likely high fluid content, clearly correlate with areas of significant seismicity.In the lower crust we detect a clear transition from high to low seismic velocities in correspondence with the Tyrrhenian coast of the study area, which may represent the transition from the thinner Tyrrhenian crust to the thicker one beneath Calabria. In this area, also characterized by a progressive detachment of a retreating lithospheric slab, the generation of a Subduction-Transform Edge Propagator (STEP) fault zone, that laterally decouples subducting lithosphere from non-subducting lithosphere in a scissor type of fashion, may have taken place. These conditions imply the existence of a kinematic decoupling which allows for differential movement between the Calabrian Arc and the southern Apennine chain. The low velocity anomaly separating the southern Apennines and the Calabrian Arc domain may be related to fluid upwelling occurring in correspondence with the northern edge of the Calabrian subducting slab.  相似文献   

12.
As a part of the north-south seismic zone in China, a lot of M6.0-7.2 earthquakes have occurred in the margin faults of the Minshan block in history. This work attempted to characterize the geometry and activity of the north section of the Minjiang fault in this region based on high-resolution satellite images, geologic and geomorphic investigations, micro-geomorphic surveys, and trench excavation. The results show left-lateral-slip and Holocene activity of this structure. Along it, the offset landform has a continuous linearity on Ⅱ terraces near the Chuanpan village. The vertical height of the fault scarp measures 3.1 meters, which is almost the same as the accumulative horizontal displacement of the gully. The accumulative horizontal shortening due to faulting is 3.0 meters. Calculation using the model of displacement-dependent characteristic earthquakes shows both the vertical and horizontal co-seismic displacements and the horizontal shortening amount are about 1.0 meter. While strata dating suggests that the vertical and horizontal slip rates are all about 0.7-0.9mm/a, and the horizontal shortening rate is approximately 1.0-1.1mm/a. The excavated trench, perpendicular to the fault trace, reveals low-angle thrust dipping in 260åt 29°. From the relationship of the fault, colluvial wedge and stratigraphy ages, three palaeoseismic events are identified from youngest to oldest at 0-295a BP, 1 405-1 565a BP, and 2 750-2 875a BP, respectively, with recurrence intervals 1 110-1 565 years and elapsed time about 0-295 years。According to the relationship between magnitude and active parameters, it is considered that the northern segment of the Minjiang fault is capable of generating M7 or greater earthquakes. Now it is in the process of stress accumulation, having a certain seismic risk.  相似文献   

13.
The macroseismic field of the Balkan area   总被引：1，自引：0，他引：1  
A catalogue of 356 macroseimic maps which are available for the Balkan area was compiled, including information on the source parameters of the corresponding earthquakes, the macroseismic parameters of their strength and their macroseismic field. The data analysis of this catalogue yields new empirical relations for attenuation, which can be applied for the calibration of historical events, modelling of isoseismals and seismic hazard assessment. An appropriate analysis allowed the separation and estimation of the average values of the geometrical spreading, n, and anelastic attenuation factor, c, for the examined area which were found equal to –3.227 ± 0.112 and –0.0033 ± 0.0010. Scaling relations for the focal macroseismic intensity, If, and the epicentral intensity I0, versus the earthquake moment magnitude were also determined for each Balkan country. A gradual decrease of the order of 0.5 to 1 intensity unit is demonstrated for recent (after 1970) earthquakes in Greece. Finally the depths of the examined earthquakes as they robustly determined (error <5 km) on the basis of macroseismic data were found to have small values ( 10 km). However large magnitude earthquakes show higher focal depths ( 25 km), in accordance with an increase of the seismic fault dimensions for such events.  相似文献   

14.
The method of relative seismic moment tensor determination proposed byStrelitz (1980) is extended a) from an interactive time domain analysis to an automated frequency domain procedure, and b) from an analysis of subevents of complex deep-focus earthquakes to the study of individual source mechanism of small events recorded at few stations.The method was applied to the recovery of seismic moment tensor components of 95 intermediate depth earthquakes withM L=2.6–4.9 from the Vrancea region, Romania. The main feature of the obtained fault plane solutions is the horizontality ofP axes and the nonhorizontal orienaation ofT axes (inverse faulting). Those events with high fracture energy per unit area of the fault can be grouped unambiguously into three depth intervals: 102–106 km, 124–135 km and 141–152 km. Moreover, their fault plane solutions are similar to ones of all strong and most moderate events from this region and the last two damaging earthquakes (November 10, 1940 withM W=7.8 and March 4 1977 withM W=7.5) occurred within the third and first depth interval, respectively. This suggests a possible correlation at these depths between fresh fracture of rocks and the occurrence of strong earthquakes.  相似文献   

15.
An M8.3 earthquake struck the southwestern part of the Hellenic Arc, near the Island of Crete, in AD 365, generating a tsunami that affected almost the entire eastern Mediterranean region. Taking into account that the time history of seismicity in this region is fairly complete for such earthquakes in the historical catalog, which can be dated as back as the 5th century B.C., there is no indication that this segment of plate boundary has been fully ruptured again. The seismic hazard associated with this part of the Hellenic Arc necessitates the evaluation of the rupture characteristics of this great event. The constraint of the faulting geometry was initially achieved by using information from seismicity, and the focal mechanisms of earthquakes that occurred during the instrumental period. A rupture model for this great earthquake is constructed by assuming an elastic medium and calculating the theoretical surface displacements for various fault models that are matched with the observed surface deformation gleaned from historical reports. The resulted fault model concerns thrust faulting with a rupture length of 160 km and a seismic moment of 5.7 × 1028 dyn·cm, an average slip of 8.9 m and a corresponding moment magnitude equal to 8.4, in excellent agreement with the macroseismic estimation. The absence of such events recurrence is an indication of the lack of complete seismic coupling that is common in subduction zones, which is in accordance with the back arc spreading of the Aegean microplate and with previous results showing low coupling for extensional strain of the upper plate.  相似文献   

16.
Wave-form modelling of body waves has been done to study the seismic source parameters of three earthquakes which occurred on October 21, 1964 (M b =5.9), September 26, 1966 (M b =5.8) and March 14, 1967 (M b =5.8). These events occurred in the Indochina border region where a low-angle thrust fault accommodates motion between the underthrusting Indian plate and overlying Himalaya. The focal depths of all these earthquakes are between 12–37 km. The total range in dip for the three events is 5°–20°. TheT axes are NE-SW directed whereas the strikes of the northward dipping nodal planes are generally parallel to the local structural trend. The total source durations have been found to vary between 5–6 seconds. The average values of seismic moment, fault radius and dislocation are 1.0–11.0×1025 dyne-cm, 7.7–8.4km and 9.4–47.4 cm, respectively whereas stress drop, apparent stress and strain energy are found to be 16–76 bars, 8.2–37.9 bars and 0.1–1.7×1021 ergs, respectively. These earthquakes possibly resulted due to the tension caused by the bending of the lithospheric plate into a region of former subduction which is now a zone of thrusting and crustal shortening.  相似文献   

17.
We excavated five trenches across the North Anatolia fault zone (NAFZ)along the Ganos fault (Gazikoy-Saros segment), which last produced surfacerupture in 1912, near Kavakkoy where the fault enters the Gulf of Saros. The trenches exposed faulted sediments in a flood-plain environment withabundant detrital charcoal and scattered land-snail shells. Twenty-tworadiocarbon dates place constraints on the ages of the exposed sediments,which range from less than a few hundred years to about 6000 years inage. In two closely spaced trenches, we identified five discrete earthquakeevent horizons in the upper 2.5 m of stratigraphy based on abruptupward termination of shear zones, folding, fissuring, and abruptstratigraphic thickening, four of which may corresponded to historicallyrecorded large regional earthquakes. The earliest of the identified eventsoccurs below an unconformity and dates to about 4 ka B.P. The morerecent four events all occurred within the past 1000–1200 years and maycorrespond to large earthquakes in A.D. 824, ca 1354, 1509, 1766 and1912 (Ambraseys and Finkel, 1987, 1991, 1995). In another trench,we identified at least two events that have occurred during the past 500years and probably correspond to the large events of 1766 and 1912. These observations support an average return period of about 250–300years for the Gazikoy-Saros segment of the NAFZ. They also suggest thatthis segment, which is bound both to the east and west by large releasingstepovers, behaves in a quasi-periodic fashion, at least for the past severalsurface ruptures.Most of the 23 mm/yr of dextral shear between Anatolia and Europeobserved by GPS occurs on the North Anatolian fault. We use18 mm/yr and the 250–300 year recurrence rate, as determined fromour trenching and the historical record, to suggest that each of theearthquakes observed in our trenches produced several meters of slip,consistent with their inferred sizes from the extent of historical damage. Considering that Istanbul has not suffered a large nearby event in theMarmara Sea since 1766, we suggest that about 4 m of strain hasaccumulated across faults in the Marmara during these past centuries. Thisis similar to the average slip in many of the large earthquakes on the NorthAnatolian fault this century. If released seismically, this could result in anearthquake in the M 7.2–M 7.6 range, similar to the August and November,1999 earthquakes east of the Marmara Sea.  相似文献   

18.
从最新地面活断层的不连续性,断层滑动速率以及古地震研究的角度讨论安宁河断裂带北段的地震潜在能力,认为不连续的活断层可能成为各自独立的地震破裂单元,从而决定了地震的潜在能力,其中,野鸡洞破裂段的潜在地震能力最强,可达7级。上次地震至今的平静时间已接近古地震的平均重现间隔,因而具有高度的地震危险性  相似文献   

19.
The study and radiocarbon dating of the low alluvial terraces of the Chon-Aksuu River, in the Northern Issyk-Kul region, which were broken by the Kebin (Kemin) earthquake of 1911 (Ms = 8.2, Io = 10 to 11), are carried out. The obtained radiocarbon dated ages refer to the second half of the Holocene. Since that time, at least eight strong earthquakes took place along this (Chon-Aksuu) segment of the Aksuu border fault. Three seismic events, including the earthquake of 1911 occurred in the second millennium A.D. This outburst of seismic energy was preceded by two millennia of seismic quiescence, which set in after another pulse of seismic activation. The latter lasted for 1.5 millennia and included five strong earthquakes. The recurrence period of seismic events during the activations is 300–600 years. Hence, the seismic regime along the Chon–Aksuu segment of the Aksuu border fault in the second half of the Holocene was a succession of two seismic activations, each with a duration of 1.0–1.5 ka, which were separated by a 2-ka interval of seismic quiescence. Therefore, the absolute datings of the river terraces of different ages which have been broken by a seismogenic rupture can serve as a reliable source of information about the age of the strong earthquakes that occurred along the seismogenic fault.  相似文献   

20.
A statistical analysis was completed on the rupture data of 29 historical strike-slip earthquakes across the world. The purpose of this study is to examine the effects of fault steps on the rupture termination of these events. The results show good correlations between the type and length of steps with the seismic rupture and a poor correlation between the step number and seismic rupture. For different magnitude intervals, the smallest widths of the fault steps (Lt) that can terminate the rupture propagation are variable: Lt?=?3 km for Ms 6.5~6.9, Lt?=?4 km for Ms 7.0~7.5, Lt?=?6 km for Ms 7.5~8.0, and Lt?=?8 km for Ms 8.0~8.5. The dilational fault step is easier to rupture through than the compression fault step. The smallest widths of the fault step for the rupture arrest can be used as an indicator to judge the scale of the rupture termination of seismic faults. This is helpful for research on fault segmentation, as well as estimating the magnitude of potential earthquakes, and is thus of significance for the assessment of seismic risks.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号