共查询到20条相似文献，搜索用时 531 毫秒
1.
不连续地质体（如断层）的自动检测一直以来都是叠后地震数据解释中的关键问题之一,尤其在三维情况中尤为重要.然而,大多数边缘检测和相干算法都对随机噪声很敏感,随机噪声衰减是叠后地震数据解释的另一个主要问题.针对构造保护去噪和断层检测问题,本文基于非平稳相似性系数完善一种构造导向滤波方法并且提出一种自动断层检测方法,形成了一套匹配的处理技术.该构造导向滤波既能够有效地衰减随机噪声又可以很好地保护地震资料中的断层等信息不被破坏,增强地震剖面中弯曲、倾斜同相轴的连续性.根据地震数据局部倾角走向,利用相邻道构建当前地震道的预测,通过预测道的叠加得到参考道,计算预测道与参考道之间的非平稳相似性系数可以设计出数据驱动的加权中值滤波.另一方面,预测道与原始道之间的非平稳相似性系数能够用于带有断层指示性的相干分析.这两种方法都基于构造预测和非平稳相似性系数,但是使用不同的调节参数和处理方案.理论模型和实际数据的处理结果证明了本文提出构造导向滤波和断层检测方法的有效性. 相似文献
2.
将基于倾角扫描的奇异值分解与经验模式分解法相结合应用到地震资料随机噪声压制中。首先利用经验模式分解法消除部分噪声,增强地震道有效信号的相关性,再利用奇异值分解对地震信号进行同相轴自动追踪,截取小时窗数据体,并进行同相轴拉平处理,经SVD计算小时窗数据中心点的值来代替计算样点的值,最终实现随机噪声的压制。理论模型试算和实际资料处理表明,本文提出的EMD-SVD方法简单易行,比单一的SVD方法去噪效果更显著有效地消除了地震资料中的随机噪声,提高了地震资料的信噪比,并改善了叠加剖面的质量。 相似文献
3.
Milton J. Porsani Bjorn Ursin Michelângelo G. Silva Paulo E. M. Melo 《Geophysical Prospecting》2013,61(1):42-52
We present a singular value decomposition (SVD) filtering method for the enhancement of coherent reflections and for attenuation of noise. The method is applied in two steps. First normal move‐out (NMO) correction is applied to shot or CMP records, with the purpose of flattening the reflections. We use a spatial SVD filter with a short sliding window to enhance coherent horizontal events. Then the data are sorted in common‐offset panels and the local dip is estimated for each panel. The next SVD filtering is performed on a small number of traces and a small number of time samples centred around the output sample position. Data in a local window are corrected for linear moveout corresponding to the dips before SVD. At the central time sample position, we sum over the dominant eigenimages of a few traces, corresponding to SVD dip filtering. We illustrate the method using land seismic data from the Tacutu basin, located in the north‐east of Brazil. The results show that the proposed method is effective and is able to reveal reflections masked by ground‐roll and other types of noise. 相似文献
4.
5.
径向时频峰值滤波算法是一种有效保持低信噪比地震勘探记录中反射同相轴的随机噪声压制方法,但该算法对空间非平稳地震勘探随机噪声压制效果不理想.本文研究空间非平稳地震勘探随机噪声,即各道噪声功率不同的地震勘探随机噪声,其在径向滤波轨线上表征近似脉冲噪声,在径向时频峰值滤波过程中干扰相邻道滤波结果.为了减小空间非平稳随机噪声的影响,本文提出一种基于绝对级差统计量(ROAD)的径向时频峰值滤波随机噪声压制方法.该方法首先根据径向轨线上信号的绝对级差统计量检测空间非平稳地震勘探随机噪声,然后结合局部时频峰值滤波和径向时频峰值滤波压制地震勘探记录中的随机噪声.将ROAD径向时频峰值滤波方法应用于合成记录和实际共炮点地震记录,结果表明ROAD径向时频峰值滤波方法可以压制空间非平稳地震勘探随机噪声且不损害有效信号,有效抑制随机噪声空间非平稳对滤波结果的影响.与径向时频峰值滤波相比,ROAD径向时频峰值滤波方法更适用于空间非平稳地震勘探随机噪声压制. 相似文献
6.
Conventional time-space domain and frequency-space domain prediction filtering methods assume that seismic data consists of two parts, signal and random noise. That is, the so-called additive noise model. However, when estimating random noise, it is assumed that random noise can be predicted from the seismic data by convolving with a prediction error filter. That is, the source-noise model. Model inconsistencies, before and after denoising, compromise the noise attenuation and signal-preservation performances of prediction filtering methods. Therefore, this study presents an inversion-based time-space domain random noise attenuation method to overcome the model inconsistencies. In this method, a prediction error filter (PEF), is first estimated from seismic data; the filter characterizes the predictability of the seismic data and adaptively describes the seismic data’s space structure. After calculating PEF, it can be applied as a regularized constraint in the inversion process for seismic signal from noisy data. Unlike conventional random noise attenuation methods, the proposed method solves a seismic data inversion problem using regularization constraint; this overcomes the model inconsistency of the prediction filtering method. The proposed method was tested on both synthetic and real seismic data, and results from the prediction filtering method and the proposed method are compared. The testing demonstrated that the proposed method suppresses noise effectively and provides better signal-preservation performance. 相似文献
7.
Attenuation of random noise and enhancement of structural continuity can significantly improve the quality of seismic interpretation. We present a new technique, which aims at reducing random noise while protecting structural information. The technique is based on combining structure prediction with either similarity‐mean filtering or lower‐upper‐middle filtering. We use structure prediction to form a structural prediction of seismic traces from neighbouring traces. We apply a non‐linear similarity‐mean filter or an lower‐upper‐middle filter to select best samples from different predictions. In comparison with other common filters, such as mean or median, the additional parameters of the non‐linear filters allow us to better control the balance between eliminating random noise and protecting structural information. Numerical tests using synthetic and field data show the effectiveness of the proposed structure‐enhancing filters. 相似文献
8.
随机噪声的影响在地震勘探中是不可避免的,常规的随机噪声压制方法在处理中往往会破坏具有时空变化特征的非平稳有效地震信号,影响地震数据的准确成像.当前油气勘探的目标已经转变为“两宽一高”,随着数据量的增大,对去噪方法的处理效率也提出了更高的要求.因此,开发高效的非平稳地震数据随机噪声压制方法具有重要意义.预测滤波技术广泛用于地震随机噪声的衰减,本文基于流式处理框架提出一种新的f-x域流式预测滤波方法,通过在频率域建立预测自回归方程,运用直接复数矩阵逆运算代替迭代算法求解非平稳滤波器系数,实现时空变地震同相轴预测,提高自适应预测滤波的计算效率.通过与工业标准的FXDECON方法和f-x域正则化非平稳自回归(RNA)方法进行对比,理论模型和实际数据的测试结果表明,提出的f-x域流式预测滤波方法能更好地平衡时空变有效信号保护、随机噪声压制和高效计算三者之间的关系,获得合理的处理效果. 相似文献
9.
地震数据本质上是时变的,不仅有效同相轴表现出确定性信号的时变特征,而且复杂地表和构造条件以及深部探测环境总是引入时变的非平稳随机噪声.标准的频率-空间域预测滤波只适合压制平面波信号假设下的平稳随机噪声,而处理非平稳地震随机噪声时,需要将数据体分割为小窗口进行分析,但效果不够理想,而传统非预测类随机噪声压制方法往往适应性不高,因此开发能够保护地震信号时变特征的随机噪声压制方法具有重要的工业价值.压缩感知是近年出现的一个新的采样理论,通过开发信号的稀疏特性,已经在地震数据处理中的数据插值以及噪声压制中得到了应用.本文系统地分析了压缩感知理论框架下的地震随机噪声压制问题,建立了阈值消噪的数学反演目标函数;针对时变有效信息具有的可压缩性,利用有限差分算法求解炮检距连续方程,构建有限差分炮检距连续预测算子(FDOC),在seislet变换框架下,提出一种新的快速稀疏变换域———FDOC-seislet变换,实现地震数据的高度稀疏表征;结合非平稳随机噪声不可压缩的特征,提出了一种整形迭代消噪方法,该方法是一种广义的迭代收缩阈值(IST)算法,在无法计算稀疏变换伴随算子的条件下,仍然能够对强噪声环境中的时变有效信息进行有效恢复.通过对模型数据和实际数据的处理,验证了FDOC-seislet稀疏变换域随机噪声迭代压制方法能够在保护复杂构造地震波信息的前提下,有效地衰减原始数据中的强振幅随机噪声干扰. 相似文献
10.
本文提出一种保护断层、裂缝等地层边缘特征的结构自适应中值滤波器,用于衰减地震资料中的随机噪声.基于地震反射同相轴局部呈线型结构的假设,采用梯度结构张量估计地层倾向,分析地层结构的规则程度,在此基础上引入地震剖面中线型和横向不连续性两种结构特征的置信度量.结构自适应中值滤波器根据这两种置信度量调整滤波器窗函数的尺度和形状,根据地层倾角调整滤波器窗函数的方向,从而使得滤波操作窗能够最佳匹配信号的局部结构特征.将本文方法用于合成和实际数据的处理,并与两种常用中值滤波方法进行对比,结果表明,该方法能够更好地解决地震剖面的随机噪声衰减和有效信号保真的问题,在增强反射同相轴的横向一致性的同时有效保持了剖面内的地层边缘和细节特征,显著改善了地震资料的品质. 相似文献
11.
Microseismic events enhancement and detection in sensor arrays using autocorrelation‐based filtering 
下载免费PDF全文
下载免费PDF全文 Entao Liu Lijun Zhu Anupama Govinda Raj James H. McClellan Abdullatif Al‐Shuhail SanLinn I. Kaka Naveed Iqbal 《Geophysical Prospecting》2017,65(6):1496-1509
Passive microseismic data are commonly buried in noise, which presents a significant challenge for signal detection and recovery. For recordings from a surface sensor array where each trace contains a time‐delayed arrival from the event, we propose an autocorrelation‐based stacking method that designs a denoising filter from all the traces, as well as a multi‐channel detection scheme. This approach circumvents the issue of time aligning the traces prior to stacking because every trace's autocorrelation is centred at zero in the lag domain. The effect of white noise is concentrated near zero lag; thus, the filter design requires a predictable adjustment of the zero‐lag value. Truncation of the autocorrelation is employed to smooth the impulse response of the denoising filter. In order to extend the applicability of the algorithm, we also propose a noise prewhitening scheme that addresses cases with coloured noise. The simplicity and robustness of this method are validated with synthetic and real seismic traces. 相似文献
12.
Seismic noise attenuation is very important for seismic data analysis and interpretation, especially for 3D seismic data. In this paper, we propose a novel method for 3D seismic random noise attenuation by applying noncausal regularized nonstationary autoregression (NRNA) in f–x–y domain. The proposed method, 3D NRNA (f–x–y domain) is the extended version of 2D NRNA (f–x domain). f–x–y NRNA can adaptively estimate seismic events of which slopes vary in 3D space. The key idea of this paper is to consider that the central trace can be predicted by all around this trace from all directions in 3D seismic cube, while the 2D f–x NRNA just considers that the middle trace can be predicted by adjacent traces along one space direction. 3D f–x–y NRNA uses more information from circumjacent traces than 2D f–x NRNA to estimate signals. Shaping regularization technology guarantees that the nonstationary autoregression problem can be realizable in mathematics with high computational efficiency. Synthetic and field data examples demonstrate that, compared with f–x NRNA method, f–x–y NRNA can be more effective in suppressing random noise and improve trace-by-trace consistency, which are useful in conjunction with interactive interpretation and auto-picking tools such as automatic event tracking. 相似文献
13.
A new spectral factorization method is presented for the estimation of a causal as well as a causally invertible ARMA operator from the correlation sequence of seismic traces. The method has been implemented for multichannel deconvolution of seismic traces with the aim of exploiting the trace-to-trace correlation that exists within seismograms. A layered earth model with a small reflectivity sequence has been considered, and the seismic traces have been considered as the output of a linear system driven by white noise reflection coefficient sequences. The present method is the concatenation of three algorithms, namely Kung's method for state variable ( F , G , H ) realization using a singular value decomposition (SVD) algorithm, Faurre's technique for computation of the strong spectral factor and Leverrier's algorithm for ARMA representation of the spectral factor. The inverted ARMA operator is used as a recursive filter for deconvolution of seismic traces. In the example shown, two traces with a covariance sequence of 160 ms length have been considered for multichannel deconvolution of stacked seismic traces. The results presented, when compared with those obtained from a conventional deconvolution algorithm, have shown encouraging prospects. 相似文献
14.
This article utilizes Savitzky–Golay (SG) filter to eliminate seismic random noise. This is a novel method for seismic random noise reduction in which SG filter adopts piecewise weighted polynomial via leastsquares estimation. Therefore, effective smoothing is achieved in extracting the original signal from noise environment while retaining the shape of the signal as close as possible to the original one. Although there are lots of classical methods such as Wiener filtering and wavelet denoising applied to eliminate seismic random noise, the SG filter outperforms them in approximating the true signal. SG filter will obtain a good tradeoff in waveform smoothing and valid signal preservation under suitable conditions. These are the appropriate window size and the polynomial degree. Through examples from synthetic seismic signals and field seismic data, we demonstrate the good performance of SG filter by comparing it with the Wiener filtering and wavelet denoising methods. 相似文献
15.
HENRY J. MEYERHOFF 《Geophysical Prospecting》1966,14(4):441-454
The common depth point method of shooting in oil exploration provides a series of seismic traces which yield information about the substrata layers at one location. After normal moveout and static corrections have been applied, the traces are combined by horizontal stacking, or linear multichannel filtering, into a single record in which the primary reflections have been enhanced relative to the multiple reflections and random noise. The criterion used in optimum horizontal stacking is to maximize the signal to noise power ratio, where signal refers to the primary reflection sequence and noise includes the multiple reflections. It is shown when this criterion is equivalent to minimizing the mean square difference between the desired signal (primary reflection sequence) and the weighted horizontally stacked traces. If the seismic traces are combined by multichannel linear filtering, the primary reflection sequence will have undergone some phase and frequency distortion on the resulting record. The signal to noise power ratio then becomes less meaningful a criterion for designing the optimum linear multichannel filter, and the mean square criterion is adopted. In general, however, since more a priori information about the seismic traces is required to design the optimum linear multichannel filter than required for the optimum set of weights of the horizontal stacking process, the former will be an improvement over the latter. It becomes evident that optimum horizontal stacking is a restricted form of linear multichannel filtering. 相似文献
16.
HENRY J. MEYERHOFF 《Geophysical Prospecting》1966,14(Z2):441-453
The common depth point method of shooting in oil exploration provides a series of seismic traces which yield information about the substrata layers at one location. After normal moveout and static corrections have been applied, the traces are combined by horizontal stacking, or linear multichannel filtering, into a single record in which the primary reflections have been enhanced relative to the multiple reflections and random noise. The criterion used in optimum horizontal stacking is to maximize the signal to noise power ratio, where signal refers to the primary reflection sequence and noise includes the multiple reflections. It is shown when this criterion is equivalent to minimizing the mean square difference between the desired signal (primary reflection sequence) and the weighted horizontally stacked traces. If the seismic traces are combined by multichannel linear filtering, the primary reflection sequence will have undergone some phase and frequency distortion on the resulting record. The signal to noise power ratio then becomes less meaningful a criterion for designing the optimum linear multichannel filter, and the mean square criterion is adopted. In general, however, since more a priori information about the seismic traces is required to design the optimum linear multichannel filter than required for the optimum set of weights of the horizontal stacking process, the former will be an improvement over the latter. It becomes evident that optimum horizontal stacking is a restricted form of linear multichannel filtering. 相似文献
17.
Reiter , E.C., Toksoz , M.N. and Purdy , G.M. 1992. A semblance-guided median filter. Geophysical Prospecting 41 , 15–41. A slowness selective median filter based on information from a local set of traces is described and implemented. The filter is constructed in two steps, the first being an estimation of a preferred slowness and the second, the selection of a median or trimmed mean value to replace the original data point. A symmetric window of traces defining the filter aperture is selected about each trace to be filtered and the filter applied repeatedly to each time point. The preferred slowness is determined by scanning a range of linear moveouts within the user-specified slowness passband. Semblance is computed for each trial slowness and the preferred slowness selected from the peak semblance value. Data points collected along this preferred slowness are then sorted from lowest to highest and in the case of a pure median filter, the middle point(s) selected to replace the original data point. The output of the filter is therefore quite insensitive to large amplitude noise bursts, retaining the well-known beneficial properties of a traditional 1D median filter. Energy which is either incoherent over the filter aperture or lies outside the slowness passband, may be additionally suppressed by weighting the filter output by the measured peak semblance. This approach may be used as a velocity filter to estimate coherent signal within a specified slowness passband and reject coherent energy outside this range. For applications of this type, other velocity estimators may be used in place of our semblance measure to provide improved velocity estimation and better filter performance. The filter aperture may also be extended to provide increased velocity estimation, but will result in additional lateral smearing of signal. We show that, in addition to a velocity filter, our approach may be used to improve signal-to-noise ratios in noisy data. The median filter tends to suppress the amplitude of random background noise and semblance weighting may be used to reduce the amplitude of background noise further while enhancing coherent signal. We apply our method to vertical seismic profile data to separate upgoing and downgoing wavefields, and also to large-offset ocean bottom hydrophone data to enhance weak refracted and post-critically reflected energy. 相似文献
18.
19.
Seismic directional random noise suppression by radial‐trace time–frequency peak filtering using the Hurst exponent statistic 下载免费PDF全文
下载免费PDF全文 Radial‐trace time–frequency peak filtering filters a seismic record along the radial‐trace direction rather than the conventional channel direction. It takes the spatial correlation of the reflected events between adjacent channels into account. Thus, radial‐trace time–frequency peak filtering performs well in denoising and enhancing the continuity of reflected events. However, in the seismic record there is often random noise whose energy is concentrated in certain directions; the noise in these directions is correlative. We refer to this kind of random noise (that is distributed randomly in time but correlative in the space) as directional random noise. Under radial‐trace time–frequency peak filtering, the directional random noise will be treated as signal and enhanced when this noise has same direction as the signal. Therefore, we need to identify the directional random noise before the filtering. In this paper, we test the linearity of signal and directional random noise in time using the Hurst exponent. The time series of signals with high linearity lead to large Hurst exponent value; however, directional random noise is a random series in time without a fixed waveform and thus its linearity is low; therefore, we can differentiate the signal and directional random noise by the Hurst exponent values. The directional random noise can then be suppressed by using a long filtering window length during the radial‐trace time–frequency peak filtering. Synthetic and real data examples show that the proposed method can remove most directional random noise and can effectively recover the reflected events. 相似文献
20.
The technology of simultaneous-source acquisition of seismic data excited by several sources can significantly improve the data collection efficiency. However, direct imaging of simultaneous-source data or blended data may introduce crosstalk noise and affect the imaging quality. To address this problem, we introduce a structure-oriented filtering operator as preconditioner into the multisource least-squares reverse-time migration (LSRTM). The structure-oriented filtering operator is a nonstationary filter along structural trends that suppresses crosstalk noise while maintaining structural information. The proposed method uses the conjugate-gradient method to minimize the mismatch between predicted and observed data, while effectively attenuating the interference noise caused by exciting several sources simultaneously. Numerical experiments using synthetic data suggest that the proposed method can suppress the crosstalk noise and produce highly accurate images. 相似文献