首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 218 毫秒
1.
Archaeological sites in beach and estuarine environments are continually threatened by diverse natural marine processes. Shoreline erosion, bluff retreat, and sea level rise all present potential for site destruction. Using historic maps, aerial imagery, and field survey methods in a GIS, 21 potentially significant archaeological sites on Georgia barrier islands were selected for determination of site‐specific rates of shoreline change using a powerful, new, moving‐boundary GIS analysis tool. A prioritized list of sites, based on the order of site loss from erosion, was generated to assist coastal managers in identifying and documenting sites most at risk. From the original selection of 21 sites, 11 sites were eroding, 8 shorelines were stable, and 2 shorelines were accreting. The methodology outlined here produces critical information on archaeological site loss rates and provides a straightforward means of prioritizing sites for detailed documentation. © 2010 Wiley Periodicals, Inc.  相似文献   

2.
This work presents an evaluation of various methods for in situ high‐precision Sr and Pb isotopic determination in archaeological glass (containing 100–500 μg g?1 target element) by nanosecond laser ablation multi‐collector‐inductively coupled plasma‐mass spectrometry (ns‐LA‐MC‐ICP‐MS). A set of four soda‐lime silicate glasses, Corning A–D, mimicking the composition of archaeological glass and produced by the Corning Museum of Glass (Corning, New York, USA), were investigated as candidates for matrix‐matched reference materials for use in the analysis of archaeological glass. Common geological reference materials with known isotopic compositions (USGS basalt glasses BHVO‐2G, GSE‐1G and NKT‐1G, soda‐lime silicate glass NIST SRM 610 and several archaeological glass samples with known Sr isotopic composition) were used to evaluate the ns‐LA‐MC‐ICP‐MS analytical procedures. When available, ns‐LA‐MC‐ICP‐MS results for the Corning glasses are reported. These were found to be in good agreement with results obtained via pneumatic nebulisation (pn) MC‐ICP‐MS after digestion of the glass matrix and target element isolation. The presence of potential spectral interference from doubly charged rare earth element (REE) ions affecting Sr isotopic determination was investigated by admixing Er and Yb aerosols by means of pneumatic nebulisation into the gas flow from the laser ablation system. It was shown that doubly charged REE ions affect the Sr isotope ratios, but that this could be circumvented by operating the instrument at higher mass resolution. Multiple strategies to correct for instrumental mass discrimination in ns‐LA‐MC‐ICP‐MS and the effects of relevant interferences were evaluated. Application of common glass reference materials with basaltic matrices for correction of ns‐LA‐MC‐ICP‐MS isotope data of archaeological glasses results in inaccurate Pb isotope ratios, rendering application of matrix‐matched reference materials indispensable. Correction for instrumental mass discrimination using the exponential law, with the application of Tl as an internal isotopic standard element introduced by pneumatic nebulisation and Corning D as bracketing isotopic calibrator, provided the most accurate results for Pb isotope ratio measurements in archaeological glass. Mass bias correction relying on the power law, combined with intra‐element internal correction, assuming a constant 88Sr/86Sr ratio, yielded the most accurate results for 87Sr/86Sr determination in archaeological glasses  相似文献   

3.
A predictive model for locating early Holocene archaeological sites in southern Southeast Alaska was developed based on shell‐bearing raised marine deposits. Fieldwork included coring of select‐raised marine strata, measuring their elevations, and radiocarbon dating the associated shell samples within the cores. A subset of the data was used to produce a relative sea‐level curve spanning the Holocene. The relative sea‐level curve suggests that sites favorable for habitation between 9200 and 7000 14C yr B.P. should be found 16–22 ± 1 m above present zero tide. The sea‐level curve and new high‐resolution digital elevation models allowed reconstruction of past shorelines at various elevations. Surveys to test the model found and recorded over 70 archaeological sites from present sea level up to 32 m above present zero tide. Eleven new sites were within the targeted elevation range and radiocarbon dated to 9280–6890 14C yr B.P. Initial investigations indicate these older sites are rich in microblade and pebble tool technology. The new early Holocene sites indicate more extensive early maritime settlement of Alaska than implied by previous studies and contribute to our understanding of the early movement of people into North America.  相似文献   

4.
This paper presents a critique of current methods of sampling and analyzing soils for metals in archaeological prospection. Commonly used methodologies in soil science are shown to be suitable for archaeological investigations, with a concomitant improvement in their resolution. Understanding the soil‐fraction location, concentration range, and spatial distribution of autochthonous (native) soil metals is shown to be a vital precursor to archaeological‐site investigations, as this is the background upon which anthropogenic deposition takes place. Nested sampling is suggested as the most cost‐effective method of investigating the spatial variability in the autochthonous metal concentrations. The use of the appropriate soil horizon (or sampling depth) and point sampling are critical in the preparation of a sampling regime. Simultaneous extraction is proposed as the most efficient method of identifying the location and eventual fate of autochthonous and anthropogenic metals, respectively. © 2004 Wiley Periodicals, Inc.  相似文献   

5.
Coastal lagoons and beach ridges are genetically independent, though non‐continuous, sedimentary archives. We here combine the results from two recently published studies in order to produce an 8000‐year‐long record of Holocene relative sea‐level changes on the island of Samsø, southern Kattegat, Denmark. The reconstruction of the initial mid‐Holocene sea‐level rise is based on the sedimentary infill from topography‐confined coastal lagoons (Sander et al., Boreas, 2015b). Sea‐level index points over the mid‐ to late Holocene period of sea‐level stability and fall are retrieved from the internal structures of a wide beach‐ridge system (Hede et al., The Holocene, 2015). Data from sediment coring, georadar and absolute dating are thus combined in an inter‐disciplinary approach that is highly reproducible in micro‐tidal environments characterised by high sediment supply. We show here that the commonly proximate occurrence of coastal lagoons and beach ridges allows us to produce seamless time series of relative sea‐level changes from field sites in SW Scandinavia and in similar coastal environments.  相似文献   

6.
An in situ, medium‐resolution LA‐ICP‐MS method was developed to measure the abundances of the first‐row transition metals, Ga and Ge in a suite of geological materials, namely the MPI‐DING reference glasses. The analytical protocol established here hinged on maximising the ablation rate of the ultraviolet (UV) laser system and the sensitivity of the ICP‐MS, as well minimising the production of diatomic oxides and argides, which serve as the dominant sources of isobaric interferences. Non‐spectral matrix effects were accounted for by using multiple external calibrators, including NIST SRM 610 and the USGS basaltic glasses BHVO‐2G, BIR‐1G and BCR‐2G, and utilising 43Ca as an internal standard. Analyses of the MPI‐DING reference glasses, which represent geological matrices ranging from basaltic to rhyolitic in composition, included measurements of concentrations as low as < 100 μg g?1 and as high as > 104 μg g?1. The new data reported here were found to statistically correlate with the ‘preferred’ reference values for these materials at the 95% confidence level, though with significantly better precision, typically on the order of ≤ 3% (2sm). This analytical method may be extended to any matrix‐matched geological sample, particularly oceanic basalts, silicate minerals and meteoritic materials.  相似文献   

7.
Grain‐size distribution is a fundamental tool for interpreting sedimentary units within depositional systems. The techniques assessed in this study are commonly used to determine grain‐size distributions for sand‐dominated sediments. However, the degree of consistency and differences in interpretation when using a combination of grain‐size methods have not yet been assessed systematically for sand‐dominated fluvial sediments. Results obtained from laser diffraction, X‐ray attenuation and scanning electron microscopy grain‐size analysis techniques were compared with those obtained from the traditional sieve/hydrometer method. Scanning electron microscopy was shown to provide an inaccurate quantitative analysis of grain‐size distributions because of difficulties in obtaining representative samples for examination. The X‐ray attenuation method is unsuitable for sand‐dominated sediments because of its upper size range of only 300 μm. The consistently strong correlation between the laser diffraction results and the sieve/hydrometer results shows that these methods are comparable for sand‐dominated fluvial sediments. Provided that sample preparation is consistent, the latter two methods can be used together within a study of such sediments while maintaining a high degree of accuracy. These results indicate that data for sand‐dominated fluvial sediments gained from the long‐established sieve/hydrometer method can be compared with confidence to those obtained by modern studies using laser diffraction techniques.  相似文献   

8.
The detection, surveying, and analysis of ancient settlement structures using remote sensing techniques offer a unique opportunity to quickly map the locations of archaeological objects in a relatively short time. High‐resolution images contribute information to the documentation and spatial relation of these objects, especially if Geographic Information Systems (GIS) and Web‐based applications are used. The aim of this study was to assess the potential use of satellite data and aerial imagesacquired by a remote‐controlled balloon to generate geospatial data with a range of resolutions and information depths. The study area was Doliche, in the landscape of ancient Commagene (Turkey), where conventional flight campaigns are impossible or strongly restricted. Recently generated data sets (i.e., topographic maps, ortho‐images, terrain models) were combined with field observations to derive ancient and modern landscape patterns and their possible relation to an assumed “ancient procession road” between the village Doliche (Dülük) and the nearby sanctuary of theRoman divinity Iupiter Dolichenus. © 2010 Wiley Periodicals, Inc.  相似文献   

9.
Research in 2006 and 2007 dealing with laser ablation‐(multicollector)‐inductively coupled plasma‐mass spectrometry, LA‐(MC)‐ICP‐MS, involved studies concerned with optimising the technique itself, as well as applying the method to a variety of problems in the Earth sciences. The causes of elemental and isotopic fractionation produced during laser ablation continues to be of considerable interest, with evidence mounting that processes occurring both at the ablation site and in the argon plasma of the ICP are culpable. There is growing excitement in the use of femtosecond lasers for LA‐(MC)‐ICP‐MS, with the hope that they reduce or eliminate melting and non‐congruent volatilisation at the ablation site and thus approach stoichiometric sampling. Ablation chamber design emerged as a serious concern, particularly with respect to achieving the rapid washout needed for fine‐scale compositional mapping of geological objects. LA‐MC‐ICP‐MS provided data for a wide range of isotopic systems, especially hafnium, but also B, S, Mg, Cu, Fe, Sr, Nd, Pb and U. Measurement uncertainties in LA‐ICP‐MS were discussed by several researchers, and are critically reviewed here ‐ total uncertainties for trace element concentration measurements of silicates including errors on the calibration values of common reference materials are ～10% (95% confidence limits), though the precision of individual spot measurements (50 to 100 μm) is much better, ～1% RSD, using a 193 nm laser and a sector field‐ICP‐MS. LA‐ICP‐MS U‐Pb ages for zircon and other U‐rich accessory phases are claimed by most geoanalysts to have 2s uncertainties of ～0.7 and 1.3% respectively but the actual accuracy of the method is probably only as good as ～2% (2s), when uncertainties associated with laser‐induced Pb/U fractionation are included.  相似文献   

10.
X‐ray computed microtomography is used to obtain high resolution imagery of a historical tsunami deposit in Andalusia, Spain (1755 Lisbon tsunami). The technique allows characterization of grain‐size distribution, structures, component analysis and sedimentary fabric of fine‐grained unconsolidated tsunami deposits at resolutions down to particle scale. The results are validated by comparing to data obtained using other techniques such as laser diffraction, anisotropy of magnetic susceptibility and X‐ray microfluorescence on the same deposits. Specific technical details such as sampling, scanning and image processing methods, and further improvements are addressed. The use of X‐ray computed microtomography provides new insights into the stratigraphy of the deposits and gives access to significantly more detailed view of key sedimentary features such as mudlines, rip‐up clasts, crude laminations, convolutions, floating outsized clasts and contacts between successive units. This analysis of the 1755 tsunami deposits using X‐ray computed microtomography allows the proposal of new hypotheses for the sedimentary processes forming tsunami deposits. Deposition by settling is limited and the section analysed here is dominated by a high shear stress leading to the development of traction carpets, with laminated mudlines corresponding to the basal frictional region of these carpets. The onset of the tsunami backwash is marked by a micro‐vortex resembling Kelvin–Helmoltz instabilities.  相似文献   

11.
The grain‐scale topography of a sediment surface is a key component of a fluvial system, affecting aspects including sediment transport, flow resistance and ecology. However, its effect is hard to quantify because of the need for grain‐scale elevation data from in situ fluvial gravel surfaces which are difficult to collect. The sediment surface properties are, therefore, commonly estimated as a function of the sediment grain‐size distribution; however, because of additional factors, such as grain packing and shape, there is not necessarily a unique relationship between the two. A new methodology has been developed that uses terrestrial laser scanning to collect grain‐scale topographic data from in situ fluvial gravel surfaces, from which digital terrain models are created. This paper investigates methods of analysing such digital terrain models, and possible sedimentological interpretations that can be drawn from the analysis. Eleven digital terrain models from exposed gravel surfaces in two contrasting rivers (the River Feshie and Bury Green Brook) were analysed by calculating: the distribution of surface elevations, semivariograms, surface inclinations, surface slopes and aspects and grain orientation. The distribution of surface elevations and surface slope and aspect analysis were found to be most informative. In the River Feshie, grain‐size was interpreted as being a dominant control on sediment surface structure and gravel imbrication was identified. In Bury Green Brook, the location of the digital terrain models within the riffle–pool sequence was the dominant control on surface structure and grain orientation. Such digital terrain models therefore provide a new approach to measuring and quantifying the topography of fluvial sediment surfaces.  相似文献   

12.
一、前言 M_4低缓异常(图1),是吉林冶金地质公司608队在1981年做地面磁法普查时发现的。该异常位于吉林省南部×××铁矿西南四公里处,处于老岭背斜南东翼隆起部位。异常区内地层主要是震旦系大罗圈河组,不整合覆盖于老岭群大栗子组之上,厚度约300—500米。×××组地层呈一些小天窗零星出露于沟谷之中。测区的西南角和东北角有少量的中生界侏罗系一白垩系地层分布,不整合(构造不整合)于大罗圈河组地层之上。×××铁矿位于该区的东北部。××××铁矿赋存于大栗子组含铁层中,矿体上盘为千  相似文献   

13.
A highly efficient numerical technique is presented for solving eigenvalue problems which arise in complicated convection — instability studies in porous media. The differential equations are written as a system of ‘natural’ variables which are suggested by the way the boundary conditions arise. The method easily gives high resolution in boundary layers, yields all the eigenvalues and eigenfunctions, deals with complex coefficients, and can handle spatially dependent coefficients in a very efficient manner. The numerical technique is motivated by the practical problem of salinization in porous sands in arid zones as is beautifully modelled by Gilman and Bear. Since the salinization study of Gilman and Bear is a prototype for the field of convective motion in unsaturated porous soils and this field is one which is increasingly occupying geotechnical attention, we believe the numerical method presented here has much potential. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

14.
Dune stratification types, which include grainfall, grainflow and ripple lamination, provide a record of the fine‐scale processes that deposited sediment on palaeo‐dune foresets. While these facies are relatively easy to distinguish in some cross‐bedded sandstones, for others – like the Permian Coconino Sandstone of northern and central Arizona – discrete stratification styles are hard to recognize at the bedding scale. Furthermore, few attempts have been made to classify fine‐scale processes in this sandstone, despite its renown as a classic aeolian dune deposit and Grand Canyon formation. To interpret depositional processes in the Coconino Sandstone, cross‐bed facies were characterized using a suite of sedimentary textures and structures. Bedding parameters were described at multiple scales via a combination of field and laboratory methods, including annotated outcrop photomosaics, strike and dip measurements, sandstone disaggregation and laser‐diffraction particle analysis, high‐resolution scans of thin sections, and scanning electron microscopy. Cross‐beds were observed to be laterally extensive along‐strike, with most dip angles ranging from the mid‐teens to mid‐twenties. While some cross‐bed sets are statistically coarser near their bases, others exhibit no significant vertical sorting trends. Both massive and laminated textures are visible in high‐resolution scans of thin sections, but laminae contacts are commonly indistinct, making normal and reverse grading difficult to define. Diagenetic features, such as stylolite seams and large pores, are also present in some samples and might indicate alteration of original textures like detrital clay laminae and carbonate minerals. Observed textures and sedimentary structures suggest that the cross‐beds may consist of grainflow and grainfall deposits, but these remain difficult to differentiate at outcrop and thin‐section scales. This characterization of fine‐scale processes will play a critical part in the development of depositional models for the Coconino Sandstone and elucidate interpretations for similar cross‐bedded formations.  相似文献   

15.
Fluctuations in relative sea level, tectonic movement, and sedimentation during the late Pleistocene to Holocene in the Hisarönü Gulf (SE Aegean Sea) and surrounding area were investigated with a high‐resolution geophysical survey and underwater archaeological observations. The Hisarönü Gulf has been affected by vertical tectonic movements and rising sea level following the last glacial period (20,000 yr B.P.). High‐resolution seismic data were interpreted to reveal the structure of the late Pleistocene to Holocene deposits and determine the location of the paleoshoreline. In order to describe the relative rise of sea level, principles of sequence stratigraphy were used for the late Pleistocene to Holocene transition, and submerged archaeological remains and bioerosional indicators were used for the late Holocene period. A comparison of archaeological observations in the study area with the known regional sea level curve indicates that the relative rise in sea level for the late Holocene is, for the most part, due to the tectonic subsidence of the coastal plain. © 2012 Wiley Periodicals, Inc.  相似文献   

16.
Regional‐scale, high‐resolution terrain data permit the study of landforms across south‐central Ontario, where the bed of the former Laurentide Ice Sheet is well exposed and passes downflow from irregular topography on Precambrian Shield highlands to flat‐lying Palaeozoic carbonate bedrock, and thick (50 to >200 m) unconsolidated sediment substrates. Rock drumlins and megagrooves are eroded into bedrock and mega‐scale glacial lineations (MSGL) occur on patchy streamlined till residuals in the Algonquin Highlands. Downflow, MSGL pass into juxtaposed rock and drift drumlins on Palaeozoic bedrock and predominantly till‐cored drumlins in areas of thick drift. The Lake Simcoe Moraines, now traceable for more than 80 km across the Peterborough drumlin field (PDF), form a distinct morphological boundary: downflow of the moraine system, drumlins are larger, broader and show no indication of subsequent reworking by the ice, whereas upflow of the moraines, a higher degree of complexity in bedform pattern and morphology is distinguished. Discrete radial and/or cross‐cutting flowset terminate at subtle till‐cored moraine ridges downflow of local topographic lows, indicating multiple phases of late‐stage ice flow with strong local topographic steering. More regional‐scale flow switching is evident as NW‐orientated bedforms modify drumlins south of the Oak Ridges Moraine, and radial flowset emanate from areas within the St. Lawrence and Ottawa River valleys. Most of the drumlins in the PDF formed during an early, regional drumlinization phase of NE–SW flow that followed the deposition of a thick regional till sheet. These were subsequently modified by local‐scale, topographically controlled flows that terminate at till‐cored moraines, providing evidence that the superimposed bedforms record dynamic ice (re)advances throughout the deglaciation of south‐central Ontario. The patterns and relationships of glacial landform distribution and characteristics in south‐central Ontario hold significance for many modern and palaeo‐ice sheets, where similar downflow changes in bed topography and substrate lithology are observed.  相似文献   

17.
During the Late Tortonian, platform‐margin‐prograding clinoforms developed at the south‐western margin of the Guadix Basin. Large‐scale wedge‐shaped deposits here comprise 26 rhythms of mixed carbonate–siliciclastic bedset packages and marl beds. These sediments were deposited on a shallow‐water, temperate‐carbonate distally steepened ramp. A downslope‐migrating sandwave field developed in this ramp, with sandwaves moving progressively down the ramp to the ramp‐slope, where they destabilized, folded and occasionally collapsed. Downslope sandwave migration was induced by currents flowing basinwards. During the Late Tortonian, the Guadix Basin was open north to the Atlantic Ocean via the Dehesas de Guadix Strait and connected east to the Mediterranean Sea through the Almanzora Corridor. According to the proposed current circulation model for the Guadix Basin for this time, surface marine currents from the Atlantic entered the basin from the northern seaway. These currents moved counter‐clockwise and shifted the sediment on the ramp, forming sandwaves that migrated downslope. The development of platform‐margin prograding clinoforms by the basinward sediment‐transport mechanisms inferred here is known relatively poorly in the ancient sedimentary record. Moreover, these wedge‐shaped geometries are similar to those found in some shelves in the Western Mediterranean Sea and could represent an outcrop analogue to (sub)‐recent, platform‐margin clinoforms revealed by high‐resolution seismic studies.  相似文献   

18.
面向流域水资源管理,提出了一个基于GIS/RS的流域分布式水文模型,模型主要包括单元水文模型与河网汇流模型两大部分。单元水文模型涉及到冠层截留、融雪、蒸散发、坡面流、非饱和土壤水运动和地下水出流等水文物理过程。产流计算考虑到地形坡度的影响采用基于地形指数的计算方法。汇流演算基于河网结构采用分段马斯京根方法。模型的大部分参数与输入信息可以利用GIS和RS技术获取,能够对气候变化和人类活动对下垫面的改变,做出快速的模拟与响应。  相似文献   

19.
《Comptes Rendus Geoscience》2018,350(6):319-330
Morocco hosts numerous archaeological sites, some of which are part of the UNESCO world heritage. Many of these sites, especially funerary mounds also called tumuli, or rock engravings and ceramics, are located in remote areas with limited access, particularly in the Saharan Morocco desert. We developed a remote sensing and GIS model to identify areas with high potential for hosting archaeological sites in the Awserd region of southern Morocco. A field campaign in a “reference site” zone of 21 km2 has revealed 233 archaeological sites. Here we use satellite images and Digital Elevation Models to examine with various techniques (spatial analysis, statistical techniques, and fuzzy logic functions) the relations between the distribution of the archaeological sites and geo-environmental variables such as ground geology, topographic elevation and slope, orientation (aspect), and distance to water sources. We derive empirical relations that reveal that the distribution of archaeological sites depends on the above geo-environmental variables. We then use the empirical relations to anticipate the potential locations of archaeological sites in a region of 980 km2 enclosing the reference site area. The model proves capable of predicting 582 sites in the larger region. Subsequent field observations there confirmed that about 80% of the model anticipations were correct. Our Archaeological Predictive Model (APM) can be scaled to larger areas and varied geographic settings, and hence can be a useful guide for archeological studies in desert regions.  相似文献   

20.
本文提出了一种基于GIS的补给潜力分析方法。在实例研究中,通过对地形、地表物质组成、包气带岩性、植被覆盖等因子建立的专题图层的叠加分析,确定了地下水的补给潜力分区,结合研究区含水层分布特征,综合确定了水源地的靶区和开采潜力区。研究表明,利用GIS确定研究区降雨入渗补给量是一种高效、直观、可行的方法。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号