共查询到20条相似文献，搜索用时 906 毫秒
1.
The paper presents a mechanical model for non‐isothermal behaviour of unsaturated soils. The model is based on an incrementally non‐linear hypoplastic model for saturated clays and can therefore tackle the non‐linear behaviour of overconsolidated soils. A hypoplastic model for non‐isothermal behaviour of saturated soils was developed and combined with the existing hypoplastic model for unsaturated soils based on the effective stress principle. Features of the soil behaviour that are included into the model, and those that are not, are clearly distinguished. The number of model parameters is kept to a minimum, and they all have a clear physical interpretation, to facilitate the model usefulness for practical applications. The step‐by‐step procedure used for the parameter calibration is described. The model is finally evaluated using a comprehensive set of experimental data for the thermo‐mechanical behaviour of an unsaturated compacted silt. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
2.
Su Kong Ngien Norhan A. Rahman Roland W. Lewis Kamarudin Ahmad 《国际地质力学数值与分析法杂志》2012,36(10):1330-1349
A numerical model describing the flow of multiphase, immiscible fluids in a deformable, double‐porosity featured soil has been developed. The model is focused on the modelling of the secondary porosity features in soil, which is more relevant to groundwater contamination problems. The non‐linear saturation and relative permeabilities were expressed as functions of the capillary pressures. The governing partial differential equations in terms of soil displacement and fluid pressures were solved numerically. Galerkin's weighted‐residual finite element method was employed to obtain the spatial discretization whereas temporal discretization was achieved using a fully implicit scheme. The model was verified against established, peer‐reviewed works, and the assumption that the immiscible fluids (non‐aqueous phase liquids) will flow preferentially through the secondary porosity features in soil was validated. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
We investigate the quasi‐static simple shear flow of a two‐dimensional assembly of cohesionless particles using discrete element method (DEM) simulations. We focus on the unsteady flow regime where the solid would experience significant evolution of stresses, mobilised shear strength and dilation. We construct the DEM model using a discretised‐wall confined granular cell where the apparent boundary is allowed to dilate or contract synchronously with the confined solid. A rather uniform simple shear field is achieved across the whole assembly, which benefits rheological studies in generalising constitutive laws for continuum methods. We examine two aspects of the simple shear behaviour: macroscopic stress and strain rate evolution, particularly the non‐coaxiality between the principal directions of the two; and micromechanics such as evolution of fabric. For an initially anisotropic specimen sheared under constant normal pressure, the direction of principal stress rotates towards that of the principal strain rate, gradually reducing the degree of non‐coaxiality from about 45° to fluctuating around 0°. The rate in approaching coaxiality is slower in samples with larger initial porosity, stress ratio and mean stress. Generally, a faster rate in approaching coaxiality in simple shear is observed in a more dilatant sample, which often shows a larger degree of mobilised fabric anisotropy, suggesting the possible important role of instantaneous internal friction angle. The evolution of principal fabric direction resembles that of the principal stress direction. © 2013 The Authors. International Journal for Numerical and Analytical Methods in Geomechanics published by John Wiley & Sons, Ltd. 相似文献
4.
The behavior of a partially saturated soil during surface‐water infiltration is analyzed by means of an elasto‐plastic constitutive model formulated in terms of effective stress and extended to unsaturated conditions. The model is calibrated considering laboratory‐scale experimental results under suction‐controlled conditions. The wetting process in two collapsing soils, initially loaded at in situ stresses, is simulated by imposing two different boundary conditions: surface ponding and water flow. The stress paths resulting from the imbibition process are analyzed at different points inside the layer. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
5.
The Barcelona basic model cannot predict the mechanical behaviour of unsaturated expansive soils, whereas the Barcelona expansive model (BExM) can only predict the stress–strain behaviour of unsaturated expansive soils without the water‐retention behaviour being incorporated. Moreover, the micro‐parameters and the coupling function between micro‐structural and macro‐structural strains in the BExM are difficult to determine. Experimental data show that the compression curves for non‐expansive soils under constant suctions are shifted towards higher void ratios with increasing suction, whereas the opposite is true for expansive soils. According to the observed water‐retention behaviour of unsaturated expansive soils, the air‐entry value increases with density, and the relationship between the degree of saturation and void ratio is linear at constant suction. According to the above observation, an elastoplastic constitutive model is developed for predicting the hydraulic and mechanical behaviour of unsaturated expansive soils, based on the existing hydro‐mechanical model for non‐expansive unsaturated soil. The model takes into consideration the effect of degree of saturation on the mechanical behaviour and that of void ratio on the water‐retention behaviour. The concept of equivalent void ratio curve is introduced to distinguish the plastic potential curve from the yield curve. The model predictions are compared with the test results of an unsaturated expansive soil, including swelling tests under constant net stress, isotropic compression tests and triaxial shear tests under constant suction. The comparison indicates that the model offers great potential for quantitatively predicting the hydraulic and mechanical behaviour of unsaturated expansive soils. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
6.
7.
This paper presents a numerical model for the elasto‐plastic electro‐osmosis consolidation of unsaturated clays experiencing large strains, by considering electro‐osmosis and hydro‐mechanical flows in a deformable multiphase porous medium. The coupled governing equations involving the pore water flow, pore gas flow, electric flow and mechanical deformation in unsaturated clays are derived within the framework of averaging theory and solved numerically using finite elements. The displacements of the solid phase, the pressure of the water phase, the pressure of the gas phase and the electric potential are taken as the primary unknowns in the proposed model. The nonlinear variation of transport parameters during electro‐osmosis consolidation are incorporated into the model using empirical expressions that strongly depend on the degree of water saturation, whereas the Barcelona Basic Model is employed to simulate the elasto‐plastic mechanical behaviour of unsaturated clays. The accuracy of the proposed model is evaluated by validating it against two well‐known numerical examples, involving electro‐osmosis and unsaturated soil behaviour respectively. Two further examples are then investigated to study the capability of the computational algorithm in modelling multiphase flow in electro‐osmosis consolidation. Finally, the effects of gas generation at the anode, the deformation characteristics, the degree of saturation and the time dependent evolution of the excess pore pressure are discussed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
On the basis of fundamental constitutive laws such as elasticity, perfect plasticity, and pure viscosity, many elasto‐viscoplastic constitutive relations have been developed since the 1970s through phenomenological approaches. In addition, a few more recent micro‐mechanical models based on multi‐scale approaches are now able to describe the main macroscopic features of the mechanical behaviour of granular media. The purpose of this paper is to compare a phenomenological constitutive relation and a micro‐mechanical model with respect to a basic issue regularly raised about granular assemblies: the incrementally non‐linear character of their behaviour. It is shown that both phenomenological and micro‐mechanical models exhibit an incremental non‐linearity. In addition, the multi‐scale approach reveals that the macroscopic incremental non‐linearity could stem from the change in the regime of local contacts between particles (from plastic regime to elastic regime) in terms of the incremental macroscopic loading direction. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
9.
A hierarchical mathematical model for analyses of coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes at high temperature is presented. The concretes are modelled as unsaturated deforming reactive porous media filled with two immiscible pore fluids, i.e. the gas mixture and the liquid mixture, in immiscible–miscible levels. The thermo‐induced desalination process is particularly integrated into the model. The chemical effects of both the desalination and the dehydration processes on the material damage and the degradation of the material strength are taken into account. The mathematical model consists of a set of coupled, partial differential equations governing the mass balance of the dry air, the mass balance of the water species, the mass balance of the matrix components dissolved in the liquid phases, the enthalpy (energy) balance and momentum balance of the whole medium mixture. The governing equations, the state equations for the model and the constitutive laws used in the model are given. A mixed weak form for the finite element solution procedure is formulated for the numerical simulation of chemo‐thermo‐hygro‐mechanical behaviours. Special considerations are given to spatial discretization of hyperbolic equation with non‐self‐adjoint operator nature. Numerical results demonstrate the performance and the effectiveness of the proposed model and its numerical procedure in reproducing coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes subjected to fire and thermal radiation. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
10.
In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
11.
Wave propagation and strain localization in a fully saturated softening porous medium under the non‐isothermal conditions 
下载免费PDF全文
下载免费PDF全文 The (THM) coupling effects on the dynamic wave propagation and strain localization in a fully saturated softening porous medium are analyzed. The characteristic polynomial corresponding to the governing equations of the THM system is derived, and the stability analysis is conducted to determine the necessary conditions for stability in both non‐isothermal and adiabatic cases. The result from the dispersion analysis based on the Abel–Ruffini theorem reveals that the roots of the characteristic polynomial for the THM problem cannot be expressed algebraically. Meanwhile, the dispersion analysis on the adiabatic case leads to a new analytical expression of the internal length scale. Our limit analysis on the phase velocity for the non‐isothermal case indicates that the internal length scale for the non‐isothermal THM system may vanish at the short wavelength limit. This result leads to the conclusion that the rate‐dependence introduced by multiphysical coupling may not regularize the THM governing equations when softening occurs. Numerical experiments are used to verify the results from the stability and dispersion analyses. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
13.
A single‐surface elasto‐plastic model developed by Desai and his coworkers is used to predict the behaviour of an interface between sand and a steel plate. The loading in the experiments and in their predictions followed various stress and displacement paths. The results of predictions of the two‐ and three‐dimensional behaviour of the interface under both constant normal stress and constant normal stiffness conditions are presented. The predictions are compared with their corresponding experimental results. The model parameters were determined on the basis of 2‐D conventional experiments under the condition of constant normal stress and they were used in the prediction of the interface behaviour in various stress paths. There is, in general, a good agreement between the predicted and experimental results. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
14.
Numerous constitutive models built on coaxial theory and validated under axi‐symmetric condition often describe the stress–stain relationships and predict the inceptions of shear banding in sands inaccurately under true triaxial condition. By adopting an elaborated Mohr–Coulomb yield function and using non‐coaxial non‐associated flow rule, a 3D non‐coaxial elasto‐plasticity model is proposed and validated by a series of true triaxial tests on loose sands. The bifurcation analysis of true triaxial tests on dense sands predicts the influence of the intermediate principal stress ratio on the onset of shear band accurately. The failure of soils is shown to be related to the formation of shear band under most intermediate principal stress ratio conditions except for those which are close to the axi‐symmetric compression condition. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
Studying the effect of non‐spherical micro‐particles on Hoek–Brown strength parameter mi using numerical true triaxial compressive tests 下载免费PDF全文
下载免费PDF全文 The strength parameter mi in the Hoek–Brown strength criterion is empirical and was developed by trial and error. To better understand the fundamental relationship between mi and the physical characteristics of intact rock, this paper presents a systematic study of mi by representing intact rock as a densely packed cemented particle material and simulating its mechanical behavior using particle flow modeling. Specifically, the three‐dimensional particle flow code (PFC3D) was used to conduct numerical true triaxial compression tests on intact rock and to investigate the effect of non‐spherical micro‐particle parameters on mi. To generate numerical intact rock specimens containing non‐spherical micro‐particles, a new genesis process was proposed, and a specific loop algorithm was used based on the efficiency of the process and the acceptability of generated specimens. Four main parameters—number, aspect ratio, size, and shape—of non‐spherical micro‐particles were studied, and the results indicated that they all have great effect on mi. The strength parameter mi increases when the number, aspect ratio, or size is larger or the shape becomes more irregular, mainly as a result of the higher level of interlocking between particles. This confirms the observations from engineering experience and laboratory experiments. To simulate the right strength parameter mi, it is important to use appropriate non‐spherical micro‐particles by controlling these four parameters. This is further demonstrated by the simulation of two widely studied rocks, Lac du Bonnet granite and Carrara marble. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
16.
A non‐equilibrium sorption—advection—diffusion model to simulate miscible pollutant transport in saturated–unsaturated soils is presented. The governing phenomena modelled in the present simulation are: convection, molecular diffusion, mechanical dispersion, sorption, immobile water effect and degradation, including both physical and chemical non‐equilibrium processes. A finite element procedure, based on the characteristic Galerkin method with an implicit algorithm is developed to numerically solve the model equations. The implicit algorithm is formulated by means of a combination of both the precise and the traditional numerical integration procedures. The stability analysis of the algorithm shows that the unconditional stability of the present implicit algorithm is enhanced as compared with that of the traditional implicit numerical integration procedure. The numerical results illustrate good performance of the present algorithm in stability and accuracy, and in simulating the effects of all the mentioned phenomena governing the contaminant transport and the concentration distribution. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
17.
Experimental observations clearly show that the relative humidity (hr) conditions influence significantly the creep behavior of cement‐based materials, indicating that the water present within these materials plays a crucial role. This work presents a creep model for hardened cement pastes (HCP), based on a multiscale homogenization approach. It takes into account both free and adsorbed water contained in the porosity and investigates their effects on the HCP macroscopic creep behavior. The calcium silicate hydrate phase is assumed to be linear viscoelastic, and the Mori–Tanaka scheme is applied in the Laplace–Carson space to the composite formed of porosity, calcium silicate hydrate, and the other main hydrated compounds (which behavior is linearly elastic) by making use of the correspondence principle. With this model, estimations of the evolution of the macroscopic creep behavior of HCP submitted to constant external loading are examined under different hr and compared with available experimental data. Finally, a method for implementing the model in a finite element code is proposed, and simulations of standard creep tests are performed to assess its validity. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
18.
The study of surface wave in a layered medium has their possible application in geophysical prospecting. In the present work, dispersion equation for torsional wave in an inhomogeneous isotropic layer between inhomogeneous isotropic half‐spaces has been derived. Two cases are discussed separately for torsional wave propagation in inhomogeneous layer between homogeneous and non‐homogeneous half‐spaces, respectively. Further, two possible modes for torsional wave propagation are obtained in case of inhomogeneous layer sandwiched between non‐homogeneous half‐spaces. Closed form solutions for displacement in the layer and half‐spaces are obtained in each case. The study reveals that the layer width, layer inhomogeneity, frequency of inhomogeneity, as well as inhomogeneity in the half‐space has significant effect on the propagation of torsional surface waves. Displacement and implicit dispersion equation for torsional wave velocities are expressed in terms of Heun functions and their derivatives. Effects of inhomogeneity on torsional wave velocity are also discussed graphically by plotting the dimensionless phase velocity against dimensionless and scaled wave number for different values of inhomogeneity parameter. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
19.
The migration of contaminant through soil is usually modeled using the advection‐dispersion equation and assumes that the porous media is stationary without introducing a constitutive equation to represent soil structure. Consequently, time‐dependent deformation induced by soil consolidation or physical remediation is not considered, despite the need to consider these variables during planning for the remediation of contaminated ground, the prediction of contaminated groundwater movement, and the design of engineered landfills. This study focuses on the numerical modeling of solute transfer during consolidation as a first step to resolve some of these issues. We combine a coupling theory‐based mass conservation law for soil‐fluid‐solute phases with finite element modeling to simulate solute transfer during deformation and groundwater convection. We also assessed the sensitivity of solute transfer to the initial boundary conditions. The modeling shows the migration of solute toward the ground surface as a result of ground settlement and the dissipation of excess pore water pressure. The form of solute transport is dependent on the ground conditions, including factors such as the loading schedule, contamination depth, and water content. The results indicate that an understanding of the interaction between coupling phases is essential in predicting solute transfer in ground deformation and could provide an appropriate approach to ground management for soil remediation. 相似文献
20.
Matthieu Dumont Said Taibi Jean‐Marie Fleureau Nabil Abou‐Bekr Abdelghani Saouab 《国际地质力学数值与分析法杂志》2011,35(12):1299-1317
A simple thermo‐hydro‐mechanical (THM) constitutive model for unsaturated soils is described. The effective stress concept is extended to unsaturated soils with the introduction of a capillary stress. This capillary stress is based on a microstructural model and calculated from attraction forces due to water menisci. The effect of desaturation and the thermal softening phenomenon are modelled with a minimal number of material parameters and based on existing models. THM process is qualitatively and quantitatively modelled by using experimental data and previous work to show the application of the model, including a drying path under mechanical stress with transition between saturated and unsaturated states, a heating path under constant suction and a deviatoric path with imposed suction and temperature. The results show that the present model can simulate the THM behaviour in unsaturated soils in a satisfactory way. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献